date:20110721

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Adil Shaikh

hi Erwan,

is this H323 gateway or MGCP gatway?

if this is H323 gateway you do not need to do hairpinning,

if mgcp then you need to do hairpinning,


most likely, you are getting error message due to 'server mwa' command in
voip and pots dialpeer.

could you please post your full config of this router.

thanks
-adil




On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:

> hi Vik and others,
>
> Have you ever encounter this on proctor rack.   Router will not load the
> MVA application.
>
> ( i have reset PUB and router ,still same)
>
> Wondering if this is VM bug or proctor ruouter error  and what is  the
> workaround ?
>
> 
> Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of
> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed.
> Status=httpc error -5=internal client transmit error
> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata:
> 0x4A3668DC
> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata:
> 0x4A3668DC
> *Jul 21 10:52:15.755: Could not load IVR script
>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
>
> --- On *Thu, 7/21/11, Erwan Erwan * wrote:
>
>
> From: Erwan Erwan 
> Subject: MVA load issue in proctor rack
> To: vma...@ipexpert.com
> Cc: supp...@ipexpert.com
> Received: Thursday, July 21, 2011, 1:09 AM
>
>hi Vik,
>
> I have encountered sevreral times, running MVA application (this always
> work most time in rack). In rack 11, I have this issue and other rack not
> remember.
>
> - I have reset and restart UCM PUB , reload router, check connectivity
> from  router to PUB
>
> but still give me failed on load MVA
>
> here is my error
> ==
> l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of
> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed.
> Status=httpc error -2=internal client timeout error
> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata:
> 0x4A829DAC
> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata:
> 0x4A829DAC
> *Jul 20 03:31:45.271: Could not load IVR script
>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
> version of pod 11
> 
> ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
> System restarted at 19:07:10 CDT Tue Jul 19 2011
> System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
>
>
> config
> ---
>
> application
>
> service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
>
> dial-peer voice 410 voip
>
>  service mwa
>
>  destination-pattern 3000
>
>  voice-class codec 1
>
>  session target ipv4:10.10.210.10
>
>  dtmf-relay h245-alphanumeric
>
>  no vad
>
>
>
>
>
> dial-peer voice 4101 pots
>
>  service mwa
>
>  incoming called-number 3000
>
>
>
> voice service voip
>
>  allow-connections h323 to h323
>
>  allow-connections h323 to sip
>
>  allow-connections sip to h323
>
>  allow-connections sip to sip
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
  .. . .
_7___|___|_|_|adil.sha...@gmail.com

. .
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Ashraf Ayyash

Hello  All ,

This error indicates that while loading the script, the VXML file
IVRMainpage.vxml failed to be downloaded from 10.10.210.10:8080 (HTTP
GET).

maybe a  firewall in the network is blocking the request from your GW
interface  to 10.10.210.10:8080 or the GET HTTP souce ip is the reason
of this problem but finally this is a connectivity issue  ,

i have seen some other post here for people who have MVA VXML loaded
but they have another issue , not sure how proctor lab is working
internal but this is the reason of the fail of loading the VMXL script
,

you can Telnet/ping/traces route using specific interface sources etc..
if you found that there router to 10.10.210.10 is routable from
specific source you can add static route for 10.10.210.10 via the
routable interface .

#The reason for the static route is because of the fact that the
router will always use the interface closest to the destination, there
is no
command to bind the http to an specific interface so static route can
be a solution for such situations

Best regards
Ash


On Thu, Jul 21, 2011 at 10:00 AM, Adil Shaikh  wrote:
>
> hi Erwan,
>
> is this H323 gateway or MGCP gatway?
>
> if this is H323 gateway you do not need to do hairpinning,
>
> if mgcp then you need to do hairpinning,
>
>
> most likely, you are getting error message due to 'server mwa' command in 
> voip and pots dialpeer.
>
> could you please post your full config of this router.
>
> thanks
> -adil
>
>
>
> On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:
>>
>> hi Vik and others,
>>
>> Have you ever encounter this on proctor rack.   Router will not load the MVA 
>> application.
>>
>> ( i have reset PUB and router ,still same)
>>
>> Wondering if this is VM bug or proctor ruouter error  and what is  the 
>> workaround ?
>>
>> 
>> Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
>> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
>> error -5=internal client transmit error
>> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 
>> 0x4A3668DC
>> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 
>> 0x4A3668DC
>> *Jul 21 10:52:15.755: Could not load IVR script
>>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>> --- On Thu, 7/21/11, Erwan Erwan  wrote:
>>
>> From: Erwan Erwan 
>> Subject: MVA load issue in proctor rack
>> To: vma...@ipexpert.com
>> Cc: supp...@ipexpert.com
>> Received: Thursday, July 21, 2011, 1:09 AM
>>
>> hi Vik,
>>
>> I have encountered sevreral times, running MVA application (this always work 
>> most time in rack). In rack 11, I have this issue and other rack not 
>> remember.
>>
>> - I have reset and restart UCM PUB , reload router, check connectivity from  
>> router to PUB
>>
>> but still give me failed on load MVA
>>
>> here is my error
>> ==
>> l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
>> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
>> error -2=internal client timeout error
>> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 
>> 0x4A829DAC
>> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 
>> 0x4A829DAC
>> *Jul 20 03:31:45.271: Could not load IVR script
>>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>> version of pod 11
>> 
>> ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
>> System restarted at 19:07:10 CDT Tue Jul 19 2011
>> System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
>>
>>
>> config
>> ---
>>
>> application
>>
>> service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>>
>> dial-peer voice 410 voip
>>
>>  service mwa
>>
>>  destination-pattern 3000
>>
>>  voice-class codec 1
>>
>>  session target ipv4:10.10.210.10
>>
>>  dtmf-relay h245-alphanumeric
>>
>>  no vad
>>
>>
>>
>>
>>
>> dial-peer voice 4101 pots
>>
>>  service mwa
>>
>>  incoming called-number 3000
>>
>>
>>
>> voice service voip
>>
>>  allow-connections h323 to h323
>>
>>  allow-connections h323 to sip
>>
>>  allow-connections sip to h323
>>
>>  allow-connections sip to sip
>>
>>
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>
>
>
> --
>   .    . . .
> _7___|___|_|_|adil.sha...@gmail.com
>     . .
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

2011-07-21 Thread Mike Thompson

An important difference between 40/60 and newer phones are actually specific to 
SIP. When dialing from a 40/60 in SIP, it uses en bloc dialing, meaning that it 
sends the called party as one big set of numbers.  41/61 and later do KPML 
which acts more like SCCP in that each digit is sent as it's hit and call 
routing decisions are made with every key press. In en bloc dialing, the 
decision isn't made until the number is presented to UCM, which occurs after 
either the inter-digit timeout expires or you press the dial softkey. 

Sent from my phone, apologies for any typos.

On Jul 21, 2011, at 1:10 AM,  wrote:

> I’m working on putting together my home lab and have started working on CME.
> 
>  
> 
> I have researched the 7940 and 7960 and on CUCM7 they are supported with the 
> following SIP images 7940 SIP-P0S3-8-12-00 and 7960 SIP-SIP41.9-0-2SR1S.  
> Will these same images work on CME.  Does someone out there know what SIP 
> image to download for CME to support these phones for SIP?  Any suggestions 
> would be appreciated.
> 
>  
> 
>  
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

2011-07-21 Thread Bill Lake

Use your CUCM to load sip, even in the lab or real world it works best.
Then once upgraded point the tftp (option 150) back at the CME and you then
can get registered on the CME.

I have done this several times without issue.  However, I seldom work with
7960, mostly 61/62/65.

I think from reading the forums that the 7960's might be more difficult to
get SIP working on but I know getting SIP working with CME is very difficult
(which is why I have VM of CUCM on my PC, to upgrade phones in the field
that need SIP and not to local CME or over slow WAN to CUCM)

On Thu, Jul 21, 2011 at 12:10 AM,  wrote:

> I’m working on putting together my home lab and have started working on
> CME.
>
> ** **
>
> I have researched the 7940 and 7960 and on CUCM7 they are supported with
> the following SIP images 7940 SIP-*P0S3-8-12-00* and 7960 SIP-*
> SIP41.9-0-2SR1S*.  Will these same images work on CME.  Does someone out
> there know what SIP image to download for CME to support these phones for
> SIP?  Any suggestions would be appreciated.
>
> ** **
>
> ** **
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Memory for your VM

2011-07-21 Thread Bill Lake

anyone with a PC style VMWare server and wanting to upgrade, deal at NewEgg
this weekend get 16GB DDR3 1600 RAM for $135

use code EMCKCHJ37

http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread indigoboy

Last week, the Kingston's 4x 4gb were down to a record low $89 after rebate.

It sold out after two days but I would expect memory prices to keep falling
lower & lower.

Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
*
*
*
*
*http://www.techbargains.com/news_displayItem.cfm/261095
*

On the other hand, I posted a question that has probably been answered
before but still up for debate:

Can anybody weigh in?

Which OS/VMware version combo is the fastest for CUCM?
32-bit Windows Server?

64-bit windows XP / Server / 7?

If 64-bit, which VMware combo?

I'm currently running workstation 6.5

https://supportforums.cisco.com/thread/2093173

*
*
On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:

> anyone with a PC style VMWare server and wanting to upgrade, deal at NewEgg
> this weekend get 16GB DDR3 1600 RAM for $135
>
> use code EMCKCHJ37
>
>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

2011-07-21 Thread Jason Lee

I'm following the strategy of everyone else and using CUCM to dictate the
version of SIP running on the phones in my lab.  I have 7960s running the
default version of SIP software that is available on CUCM 7.0(1).  It shows
up as P0S3-08-8-00 in the device defaults page.  I have registered phones
running that version of software many times to both CUCM and CUCME without
issues.  Well except for the normal growing pain issues associated with
registering SIP phones to CUCME.

HTH,

Jason

On Thu, Jul 21, 2011 at 8:22 AM, Bill Lake  wrote:

> Use your CUCM to load sip, even in the lab or real world it works best.
> Then once upgraded point the tftp (option 150) back at the CME and you then
> can get registered on the CME.
>
> I have done this several times without issue.  However, I seldom work with
> 7960, mostly 61/62/65.
>
> I think from reading the forums that the 7960's might be more difficult to
> get SIP working on but I know getting SIP working with CME is very difficult
> (which is why I have VM of CUCM on my PC, to upgrade phones in the field
> that need SIP and not to local CME or over slow WAN to CUCM)
>
> On Thu, Jul 21, 2011 at 12:10 AM,  wrote:
>
>> I’m working on putting together my home lab and have started working on
>> CME.
>>
>> ** **
>>
>> I have researched the 7940 and 7960 and on CUCM7 they are supported with
>> the following SIP images 7940 SIP-*P0S3-8-12-00* and 7960 SIP-*
>> SIP41.9-0-2SR1S*.  Will these same images work on CME.  Does someone out
>> there know what SIP image to download for CME to support these phones for
>> SIP?  Any suggestions would be appreciated.
>>
>> ** **
>>
>> ** **
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread Sam Park

Answering VMWare question.
If you can afford to, go Bare-metal  VMWare ESXi.

Sam

On Thu, Jul 21, 2011 at 9:27 AM, indigoboy  wrote:

> Last week, the Kingston's 4x 4gb were down to a record low $89 after
> rebate.
>
> It sold out after two days but I would expect memory prices to keep falling
> lower & lower.
>
>
> Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
> *
> *
> *
> *
> *http://www.techbargains.com/news_displayItem.cfm/261095
> *
>
>
>
>
> On the other hand, I posted a question that has probably been answered
> before but still up for debate:
>
> Can anybody weigh in?
>
> Which OS/VMware version combo is the fastest for CUCM?
> 32-bit Windows Server?
>
> 64-bit windows XP / Server / 7?
>
> If 64-bit, which VMware combo?
>
> I'm currently running workstation 6.5
>
> https://supportforums.cisco.com/thread/2093173
>
>
>
>
> *
> *
> On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:
>
>> anyone with a PC style VMWare server and wanting to upgrade, deal at
>> NewEgg this weekend get 16GB DDR3 1600 RAM for $135
>>
>> use code EMCKCHJ37
>>
>>
>> http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

2011-07-21 Thread Bill Lake

I think everyone has SIP registration issue at first with CUCME : )

From: Jason Lee [mailto:jas7...@gmail.com] 
Sent: Thursday, July 21, 2011 9:15 AM
To: Bill Lake
Cc: michael.se...@compucom.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP
QUESTION.

I'm following the strategy of everyone else and using CUCM to dictate the
version of SIP running on the phones in my lab.  I have 7960s running the
default version of SIP software that is available on CUCM 7.0(1).  It shows
up as P0S3-08-8-00 in the device defaults page.  I have registered phones
running that version of software many times to both CUCM and CUCME without
issues.  Well except for the normal growing pain issues associated with
registering SIP phones to CUCME.  

HTH,

Jason

On Thu, Jul 21, 2011 at 8:22 AM, Bill Lake  wrote:

Use your CUCM to load sip, even in the lab or real world it works best.
Then once upgraded point the tftp (option 150) back at the CME and you then
can get registered on the CME. 

I have done this several times without issue.  However, I seldom work with
7960, mostly 61/62/65.

I think from reading the forums that the 7960's might be more difficult to
get SIP working on but I know getting SIP working with CME is very difficult
(which is why I have VM of CUCM on my PC, to upgrade phones in the field
that need SIP and not to local CME or over slow WAN to CUCM)

On Thu, Jul 21, 2011 at 12:10 AM,  wrote:

I'm working on putting together my home lab and have started working on CME.

I have researched the 7940 and 7960 and on CUCM7 they are supported with the
following SIP images 7940 SIP-P0S3-8-12-00 and 7960 SIP-SIP41.9-0-2SR1S.
Will these same images work on CME.  Does someone out there know what SIP
image to download for CME to support these phones for SIP?  Any suggestions
would be appreciated.

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

2011-07-21 Thread Michael.Sears

So Bill.  Just so I understand you.  Register the SIP phones to CUCM them just 
move them over to CUCME.  That's sounds easy enough since CUCM already has the 
phone loads for both the 7940 and 7960's.  I didn't buy the newer phones to try 
and same a little money.  I got new 7940s and 7960s, 8 for 384.00 - a guy made 
me an offer I couldn't refuse.  Thanks for your response.

--ms


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Software versions

2011-07-21 Thread Ramos, Rohan

Just wanted to double check what was the software versions for the CCIE-Voice 
Labs?

Is it 7.0 or 7.1. It would be great to know the exact version

Regards,
Rohan

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] 1:1 pre-lab class

2011-07-21 Thread Voice Lab

I was wondering if anyone interested in one-on-one pre-lab class.  And if
yes, how much you're willing to pay for it.

Here are the details:

Duration: 8 hours.

Delivery mothod: Virtual classroom (webex and voice conference) with CCIE
instructors.

Targeted audience: For the candidates who have taken CCIE voice lab at least
once.  You may still enroll anyway.  But you'll get the best out of it if
you had taken the lab before.

The class will focus on strategy, tricks and traps that was never told on
any exsiting official or "unofficial" study materials.

Instructors credibility: Most of the instructors are holding more than one
active CCIE certifications including CCIE voice.  Some instructor passed the
lab lately in 3:45 (yes, you read it right, 3 hours and 45 minutes).

The following are optional and will be provided in best effort basis:

Material: Lab 1 - 5.  Detailed questions and solutions.

Lab: Full lab (4 x 3825, 1 x 3750G) with all modules (ESW, T1/E1, CUE,
etc.).  IP addressing, port numbering and num plan are set up in such a way
that you'll feel like home when you in the lab.  PSTN router to simulate
Frame-Relay switch, PSTN T1/E1 switch, backbone GateKeeper and PSTN phones.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] 1:1 pre-lab class

2011-07-21 Thread Rrcrumm

Sorry I don't believe 3 hours 45 minutes. 

Can anyone who passed says they finished in four hours?

Randall

Sent from my iPhone

On Jul 21, 2011, at 10:03 AM, Voice Lab  wrote:

> I was wondering if anyone interested in one-on-one pre-lab class.  And if 
> yes, how much you're willing to pay for it.
>  
> Here are the details:
>  
> Duration: 8 hours.
>  
> Delivery mothod: Virtual classroom (webex and voice conference) with CCIE 
> instructors.
>  
> Targeted audience: For the candidates who have taken CCIE voice lab at least 
> once.  You may still enroll anyway.  But you'll get the best out of it if you 
> had taken the lab before.
>  
> The class will focus on strategy, tricks and traps that was never told on any 
> exsiting official or "unofficial" study materials.
>  
> Instructors credibility: Most of the instructors are holding more than one 
> active CCIE certifications including CCIE voice.  Some instructor passed the 
> lab lately in 3:45 (yes, you read it right, 3 hours and 45 minutes).
>  
> The following are optional and will be provided in best effort basis:
>  
> Material: Lab 1 - 5.  Detailed questions and solutions.
>  
> Lab: Full lab (4 x 3825, 1 x 3750G) with all modules (ESW, T1/E1, CUE, etc.). 
>  IP addressing, port numbering and num plan are set up in such a way that 
> you'll feel like home when you in the lab.  PSTN router to simulate 
> Frame-Relay switch, PSTN T1/E1 switch, backbone GateKeeper and PSTN phones.
>  
>  
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Software versions

2011-07-21 Thread CCIEVoiceKP

7.0

https://learningnetwork.cisco.com/docs/DOC-5292

KP

On Thu, Jul 21, 2011 at 8:06 AM, Ramos, Rohan  wrote:

>  Just wanted to double check what was the software versions for the
> CCIE-Voice Labs?
>
> ** **
>
> Is it 7.0 or 7.1. It would be great to know the exact version
>
> ** **
>
> Regards,
>
> Rohan
>
> ** **
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Erwan Erwan

Adil,
tks for help, so u mean i do not need this command for h323?
 
"application"  service mwa  http://x.x.x.x
 
 
- this is nothing to do until dialpeer level, this issue come up when load the  
applicatio service  .

--- On Thu, 7/21/11, Adil Shaikh  wrote:


From: Adil Shaikh 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Erwan Erwan" 
Cc: ccie_voice@onlinestudylist.com
Received: Thursday, July 21, 2011, 3:00 PM



hi Erwan, 
 
is this H323 gateway or MGCP gatway?
 
if this is H323 gateway you do not need to do hairpinning, 
 
if mgcp then you need to do hairpinning, 
 
 
most likely, you are getting error message due to 'server mwa' command in voip 
and pots dialpeer. 
 
could you please post your full config of this router. 
 
thanks
-adil 
 


 
On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:






hi Vik and others,
 
Have you ever encounter this on proctor rack.   Router will not load the MVA 
application.
 
( i have reset PUB and router ,still same)
 
Wondering if this is VM bug or proctor ruouter error  and what is  the 
workaround ?
 

Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -5=internal client transmit error
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A3668DC
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A3668DC
*Jul 21 10:52:15.755: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 


--- On Thu, 7/21/11, Erwan Erwan  wrote:


From: Erwan Erwan 
Subject: MVA load issue in proctor rack
To: vma...@ipexpert.com
Cc: supp...@ipexpert.com
Received: Thursday, July 21, 2011, 1:09 AM







hi Vik,
 
I have encountered sevreral times, running MVA application (this always work 
most time in rack). In rack 11, I have this issue and other rack not remember.
 
- I have reset and restart UCM PUB , reload router, check connectivity from  
router to PUB
 
but still give me failed on load MVA
 
here is my error
==
l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -2=internal client timeout error
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A829DAC
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A829DAC
*Jul 20 03:31:45.271: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
 
 
version of pod 11

ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
System restarted at 19:07:10 CDT Tue Jul 19 2011
System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
 
 
config
---
application 
service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml 
  
dial-peer voice 410 voip 
 service mwa 
 destination-pattern 3000 
 voice-class codec 1 
 session target ipv4:10.10.210.10 
 dtmf-relay h245-alphanumeric 
 no vad 
  
  
dial-peer voice 4101 pots 
 service mwa 
 incoming called-number 3000 
  
voice service voip 
 allow-connections h323 to h323 
 allow-connections h323 to sip 
 allow-connections sip to h323 
 allow-connections sip to sip 







 
 
 
















___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com



-- 

  .    . . .
_7___|___|_|_|adil.sha...@gmail.com 
 
    . .
 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] QoS bandwidth calculations

2011-07-21 Thread CCIEVoiceKP

I'm good with how to calculate BW from the QoS SRND, however it seems to get
a little squishy when it comes to values for cRTP and rounding the output.
For example, say I have a requirement to allow 5 g729 calls and I'm using
MLP with header compression.  We know that by default CRTp should be 2
without checksum and 4 with checksum but in going through the Vol1 and Vol 2
labs and VoDs I've seen both values used with no metion of whether or not
checksum was a requirement.  So if we calcualte first with cRTP of 2 bytes
we get 13 + 2 + 20 = 35 * 8 * 50 = 14000 = *14kbps*   with cRTP of 4 we
get 13 + 4 + 20 = 14800 = *14.8kbps.*  Now if we multiply this out by the
number of calls we get 14kbps * 5 = *70kbps* and 14.8 * 5 = *74kbps
*respectively
 or do we?  Because I've seen the rounding take place earlier on so we
would in essence have 15kbps * 5 = *75kbps.*

Keep in mind this is if your following the SRND.  Vik and Amy recommend
using 9bytes as the L2 value for MLP as opposed to 13bytes... I realize this
is a more accurate number but do we have any official guidance as to how the
proctors are grading this?  Are they using values strictly from the SRND?
How big is the window or margin of error for these calculations?

I know this sounds like splitting hairs but I've taken the lab before and
walked away with 0 points in QoS not knowing why.  Thanks in advance for any
insight?

KP
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread indigoboy

I know ESX would be the fastest but I'd like to be able to use the box for
other things occasionally.

That being said:
1) are drivers a pain to load on ESX?
2) is there a dual-boot option where I can boot ESX and Windows?



On Thu, Jul 21, 2011 at 7:36 AM, Sam Park wrote:

> Answering VMWare question.
> If you can afford to, go Bare-metal  VMWare ESXi.
>
> Sam
>
>
> On Thu, Jul 21, 2011 at 9:27 AM, indigoboy  wrote:
>
>> Last week, the Kingston's 4x 4gb were down to a record low $89 after
>> rebate.
>>
>> It sold out after two days but I would expect memory prices to keep
>> falling lower & lower.
>>
>>
>> Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
>> *
>> *
>> *
>> *
>> *http://www.techbargains.com/news_displayItem.cfm/261095
>> *
>>
>>
>>
>>
>> On the other hand, I posted a question that has probably been answered
>> before but still up for debate:
>>
>> Can anybody weigh in?
>>
>> Which OS/VMware version combo is the fastest for CUCM?
>> 32-bit Windows Server?
>>
>> 64-bit windows XP / Server / 7?
>>
>> If 64-bit, which VMware combo?
>>
>> I'm currently running workstation 6.5
>>
>> https://supportforums.cisco.com/thread/2093173
>>
>>
>>
>>
>> *
>> *
>> On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:
>>
>>> anyone with a PC style VMWare server and wanting to upgrade, deal at
>>> NewEgg this weekend get 16GB DDR3 1600 RAM for $135
>>>
>>> use code EMCKCHJ37
>>>
>>>
>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread Bill Lake

Yes you should be able to dual boot, I doubt that the boot loaders would
work but you could use the BIOS controls to select the boot device.  Some
systems like Dell/HP ect let you pick the boot device from a menu.

So if I was doing this, I would load windows on 1 disk, disconnect that
disk, install ESXi on a second disk, not the same SATA channel.  Then I
would connect up both disk and use the BIOS to pick the OS to boot.



On Thu, Jul 21, 2011 at 4:10 PM, indigoboy  wrote:

> I know ESX would be the fastest but I'd like to be able to use the box for
> other things occasionally.
>
> That being said:
> 1) are drivers a pain to load on ESX?
> 2) is there a dual-boot option where I can boot ESX and Windows?
>
>
>
> On Thu, Jul 21, 2011 at 7:36 AM, Sam Park wrote:
>
>> Answering VMWare question.
>> If you can afford to, go Bare-metal  VMWare ESXi.
>>
>> Sam
>>
>>
>> On Thu, Jul 21, 2011 at 9:27 AM, indigoboy  wrote:
>>
>>> Last week, the Kingston's 4x 4gb were down to a record low $89 after
>>> rebate.
>>>
>>> It sold out after two days but I would expect memory prices to keep
>>> falling lower & lower.
>>>
>>>
>>> Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
>>> *
>>> *
>>> *
>>> *
>>> *http://www.techbargains.com/news_displayItem.cfm/261095
>>> *
>>>
>>>
>>>
>>>
>>> On the other hand, I posted a question that has probably been answered
>>> before but still up for debate:
>>>
>>> Can anybody weigh in?
>>>
>>> Which OS/VMware version combo is the fastest for CUCM?
>>> 32-bit Windows Server?
>>>
>>> 64-bit windows XP / Server / 7?
>>>
>>> If 64-bit, which VMware combo?
>>>
>>> I'm currently running workstation 6.5
>>>
>>> https://supportforums.cisco.com/thread/2093173
>>>
>>>
>>>
>>>
>>> *
>>> *
>>> On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:
>>>
 anyone with a PC style VMWare server and wanting to upgrade, deal at
 NewEgg this weekend get 16GB DDR3 1600 RAM for $135

 use code EMCKCHJ37


 http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A


 ___
 For more information regarding industry leading CCIE Lab training,
 please visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread indigoboy

This seems like a doable solution. to dualboot from the bios.

In terms of quantifying the cost-benefit of going into a ESX environment,
what would you say the advantages are?

That is, in terms of speed, is it about 20% faster than a windows platform?

Just trying to put it in numbers to justify the extra work involved =)


Also, one advantage having my CUCM sit on top of windows is that I don't
need to hook up a monitor or keyboard to it.

I have it set to just boot up and run on VNC. Does ESX allow for any type of
remote desktop feature where I can bypass keyboard/mouse/monitor solution?



On Thu, Jul 21, 2011 at 2:54 PM, Bill Lake  wrote:

> Yes you should be able to dual boot, I doubt that the boot loaders would
> work but you could use the BIOS controls to select the boot device.  Some
> systems like Dell/HP ect let you pick the boot device from a menu.
>
> So if I was doing this, I would load windows on 1 disk, disconnect that
> disk, install ESXi on a second disk, not the same SATA channel.  Then I
> would connect up both disk and use the BIOS to pick the OS to boot.
>
>
>
> On Thu, Jul 21, 2011 at 4:10 PM, indigoboy  wrote:
>
>> I know ESX would be the fastest but I'd like to be able to use the box for
>> other things occasionally.
>>
>> That being said:
>> 1) are drivers a pain to load on ESX?
>> 2) is there a dual-boot option where I can boot ESX and Windows?
>>
>>
>>
>> On Thu, Jul 21, 2011 at 7:36 AM, Sam Park wrote:
>>
>>> Answering VMWare question.
>>> If you can afford to, go Bare-metal  VMWare ESXi.
>>>
>>> Sam
>>>
>>>
>>> On Thu, Jul 21, 2011 at 9:27 AM, indigoboy  wrote:
>>>
 Last week, the Kingston's 4x 4gb were down to a record low $89 after
 rebate.

 It sold out after two days but I would expect memory prices to keep
 falling lower & lower.


 Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
 *
 *
 *
 *
 *http://www.techbargains.com/news_displayItem.cfm/261095
 *




 On the other hand, I posted a question that has probably been answered
 before but still up for debate:

 Can anybody weigh in?

 Which OS/VMware version combo is the fastest for CUCM?
 32-bit Windows Server?

 64-bit windows XP / Server / 7?

 If 64-bit, which VMware combo?

 I'm currently running workstation 6.5

 https://supportforums.cisco.com/thread/2093173




 *
 *
 On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:

> anyone with a PC style VMWare server and wanting to upgrade, deal at
> NewEgg this weekend get 16GB DDR3 1600 RAM for $135
>
> use code EMCKCHJ37
>
>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
>
>
> ___
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>


 ___
 For more information regarding industry leading CCIE Lab training,
 please visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

>>>
>>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] QoS bandwidth calculations

2011-07-21 Thread Cristobal Priego

i have always used the values from the QoS SRND and i haven't had any
problems


take a look at the following analysis

http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg06644.html


2011/7/21 CCIEVoiceKP 

> I'm good with how to calculate BW from the QoS SRND, however it seems to
> get a little squishy when it comes to values for cRTP and rounding the
> output.  For example, say I have a requirement to allow 5 g729 calls and I'm
> using MLP with header compression.  We know that by default CRTp should be 2
> without checksum and 4 with checksum but in going through the Vol1 and Vol 2
> labs and VoDs I've seen both values used with no metion of whether or not
> checksum was a requirement.  So if we calcualte first with cRTP of 2 bytes
> we get 13 + 2 + 20 = 35 * 8 * 50 = 14000 = *14kbps*   with cRTP of 4
> we get 13 + 4 + 20 = 14800 = *14.8kbps.*  Now if we multiply this out by
> the number of calls we get 14kbps * 5 = *70kbps* and 14.8 * 5 = *74kbps 
> *respectively
>  or do we?  Because I've seen the rounding take place earlier on so we
> would in essence have 15kbps * 5 = *75kbps.*
>
> Keep in mind this is if your following the SRND.  Vik and Amy recommend
> using 9bytes as the L2 value for MLP as opposed to 13bytes... I realize this
> is a more accurate number but do we have any official guidance as to how the
> proctors are grading this?  Are they using values strictly from the SRND?
> How big is the window or margin of error for these calculations?
>
> I know this sounds like splitting hairs but I've taken the lab before and
> walked away with 0 points in QoS not knowing why.  Thanks in advance for any
> insight?
>
> KP
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] 1:1 pre-lab class

2011-07-21 Thread indigoboy

LOL!

3:45 can easily be done with you know all the questions & answers AHEAD of
time.

At that point, you are just typing in commands like a monkey.

Monkey see, Monkey do.

What is funny/interesting is how the plan to cover 5 labs in 8 hours.
that would require doing each lab in 1.6 hours.

Now THAT is impressive! Even for a Monkey.



On Thu, Jul 21, 2011 at 10:45 AM, Rrcrumm  wrote:

> Sorry I don't believe 3 hours 45 minutes.
>
> Can anyone who passed says they finished in four hours?
>
> Randall
>
> Sent from my iPhone
>
> On Jul 21, 2011, at 10:03 AM, Voice Lab  wrote:
>
> > I was wondering if anyone interested in one-on-one pre-lab class.  And if
> yes, how much you're willing to pay for it.
> >
> > Here are the details:
> >
> > Duration: 8 hours.
> >
> > Delivery mothod: Virtual classroom (webex and voice conference) with CCIE
> instructors.
> >
> > Targeted audience: For the candidates who have taken CCIE voice lab at
> least once.  You may still enroll anyway.  But you'll get the best out of it
> if you had taken the lab before.
> >
> > The class will focus on strategy, tricks and traps that was never told on
> any exsiting official or "unofficial" study materials.
> >
> > Instructors credibility: Most of the instructors are holding more than
> one active CCIE certifications including CCIE voice.  Some instructor passed
> the lab lately in 3:45 (yes, you read it right, 3 hours and 45 minutes).
> >
> > The following are optional and will be provided in best effort basis:
> >
> > Material: Lab 1 - 5.  Detailed questions and solutions.
> >
> > Lab: Full lab (4 x 3825, 1 x 3750G) with all modules (ESW, T1/E1, CUE,
> etc.).  IP addressing, port numbering and num plan are set up in such a way
> that you'll feel like home when you in the lab.  PSTN router to simulate
> Frame-Relay switch, PSTN T1/E1 switch, backbone GateKeeper and PSTN phones.
> >
> >
> > ___
> > For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Adil Shaikh

hi erwan,

if your router is an H323 and you are getting inbound for Mobile Voice
Access, you need 'service mwa' command on POTS dial-peer which has
incoming-called number 3000.
you do not need the same command on voip dial-peer.

You will always need 'application' 'service mwa http://..'

Please post full config of router and let us know what have you configured
on Call Manager (including service parameters) for MVA.

-adil


On Fri, Jul 22, 2011 at 5:48 AM, Erwan Erwan  wrote:

> Adil,
> tks for help, so u mean i do not need this command for h323?
>
> "application"  service mwa  http://x.x.x.x
>
>
> - this is nothing to do until dialpeer level, this issue come up when load
> the  applicatio service  .
>
> --- On *Thu, 7/21/11, Adil Shaikh * wrote:
>
>
> From: Adil Shaikh 
> Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
> To: "Erwan Erwan" 
> Cc: ccie_voice@onlinestudylist.com
> Received: Thursday, July 21, 2011, 3:00 PM
>
>
>  hi Erwan,
>
> is this H323 gateway or MGCP gatway?
>
> if this is H323 gateway you do not need to do hairpinning,
>
> if mgcp then you need to do hairpinning,
>
>
> most likely, you are getting error message due to 'server mwa' command in
> voip and pots dialpeer.
>
> could you please post your full config of this router.
>
> thanks
> -adil
>
>
>
>
> On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan 
> http://ca.mc1205.mail.yahoo.com/mc/compose?to=e_er...@yahoo.com>
> > wrote:
>
>   hi Vik and others,
>
> Have you ever encounter this on proctor rack.   Router will not load the
> MVA application.
>
> ( i have reset PUB and router ,still same)
>
> Wondering if this is VM bug or proctor ruouter error  and what is  the
> workaround ?
>
> 
> Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of
> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed.
> Status=httpc error -5=internal client transmit error
> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata:
> 0x4A3668DC
> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata:
> 0x4A3668DC
> *Jul 21 10:52:15.755: Could not load IVR script
>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
>
> --- On *Thu, 7/21/11, Erwan Erwan 
> http://ca.mc1205.mail.yahoo.com/mc/compose?to=e_er...@yahoo.com>
> >* wrote:
>
>
> From: Erwan Erwan 
> http://ca.mc1205.mail.yahoo.com/mc/compose?to=e_er...@yahoo.com>
> >
> Subject: MVA load issue in proctor rack
> To: 
> vma...@ipexpert.com
> Cc: 
> supp...@ipexpert.com
> Received: Thursday, July 21, 2011, 1:09 AM
>
>hi Vik,
>
> I have encountered sevreral times, running MVA application (this always
> work most time in rack). In rack 11, I have this issue and other rack not
> remember.
>
> - I have reset and restart UCM PUB , reload router, check connectivity
> from  router to PUB
>
> but still give me failed on load MVA
>
> here is my error
> ==
> l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of
> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed.
> Status=httpc error -2=internal client timeout error
> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata:
> 0x4A829DAC
> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata:
> 0x4A829DAC
> *Jul 20 03:31:45.271: Could not load IVR script
>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
> version of pod 11
> 
> ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
> System restarted at 19:07:10 CDT Tue Jul 19 2011
> System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
>
>
> config
> ---
>
> application
>
> service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
>
> dial-peer voice 410 voip
>
>  service mwa
>
>  destination-pattern 3000
>
>  voice-class codec 1
>
>  session target ipv4:10.10.210.10
>
>  dtmf-relay h245-alphanumeric
>
>  no vad
>
>
>
>
>
> dial-peer voice 4101 pots
>
>  service mwa
>
>  incoming called-number 3000
>
>
>
> voice service voip
>
>  allow-connections h323 to h323
>
>  allow-connections h323 to sip
>
>  allow-connections sip to h323
>
>  allow-connections sip to sip
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
>
>
> --
>   .. . .
> _7___|___|_|_|
> adil.sha...@gmail.com
>
> . .
>
>
>


-- 
  .. . .
_7___|___|_|_|adil.sha...@gmail.com

. .
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Ar

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

2011-07-21 Thread Bill Lake

ESXi is loaded via a keyboard and mouse in this situation, after that is
complete, everything else has to be completed remotely.  You first go to a
web page, get the VM client, install client and begin installing your
Virtual Machines (VM's) that is it.  You might want to play with shared
resources if your system is a little low on memory but otherwise you should
be fine.

As far as performance, I find that by using some old SATA disk I had laying
around and spreading the servers out over several disk, that I can not
really even tell I am on a VM, it seems as responsive as a real server for
the most part, sometimes if I am booting another system that is on the same
HDD that will slow things down so I try to avoid that but otherwise it works
great.  Much better than multiple machines in a VMware server or workstation
running in windows or OS X.  The only disadvantage is there is not an OS X
client but if your doing your IE study in OS X you have to have a windows
machine to run some things anyway.

On Thu, Jul 21, 2011 at 5:18 PM, indigoboy  wrote:

> This seems like a doable solution. to dualboot from the bios.
>
> In terms of quantifying the cost-benefit of going into a ESX environment,
> what would you say the advantages are?
>
> That is, in terms of speed, is it about 20% faster than a windows platform?
>
> Just trying to put it in numbers to justify the extra work involved =)
>
>
> Also, one advantage having my CUCM sit on top of windows is that I don't
> need to hook up a monitor or keyboard to it.
>
> I have it set to just boot up and run on VNC. Does ESX allow for any type
> of remote desktop feature where I can bypass keyboard/mouse/monitor
> solution?
>
>
>
> On Thu, Jul 21, 2011 at 2:54 PM, Bill Lake  wrote:
>
>> Yes you should be able to dual boot, I doubt that the boot loaders would
>> work but you could use the BIOS controls to select the boot device.  Some
>> systems like Dell/HP ect let you pick the boot device from a menu.
>>
>> So if I was doing this, I would load windows on 1 disk, disconnect that
>> disk, install ESXi on a second disk, not the same SATA channel.  Then I
>> would connect up both disk and use the BIOS to pick the OS to boot.
>>
>>
>>
>> On Thu, Jul 21, 2011 at 4:10 PM, indigoboy  wrote:
>>
>>> I know ESX would be the fastest but I'd like to be able to use the box
>>> for other things occasionally.
>>>
>>> That being said:
>>> 1) are drivers a pain to load on ESX?
>>> 2) is there a dual-boot option where I can boot ESX and Windows?
>>>
>>>
>>>
>>> On Thu, Jul 21, 2011 at 7:36 AM, Sam Park 
>>> wrote:
>>>
 Answering VMWare question.
 If you can afford to, go Bare-metal  VMWare ESXi.

 Sam


 On Thu, Jul 21, 2011 at 9:27 AM, indigoboy  wrote:

> Last week, the Kingston's 4x 4gb were down to a record low $89 after
> rebate.
>
> It sold out after two days but I would expect memory prices to keep
> falling lower & lower.
>
>
> Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
> *
> *
> *
> *
> *http://www.techbargains.com/news_displayItem.cfm/261095
> *
>
>
>
>
> On the other hand, I posted a question that has probably been answered
> before but still up for debate:
>
> Can anybody weigh in?
>
> Which OS/VMware version combo is the fastest for CUCM?
> 32-bit Windows Server?
>
> 64-bit windows XP / Server / 7?
>
> If 64-bit, which VMware combo?
>
> I'm currently running workstation 6.5
>
> https://supportforums.cisco.com/thread/2093173
>
>
>
>
> *
> *
> On Thu, Jul 21, 2011 at 5:26 AM, Bill Lake  wrote:
>
>> anyone with a PC style VMWare server and wanting to upgrade, deal at
>> NewEgg this weekend get 16GB DDR3 1600 RAM for $135
>>
>> use code EMCKCHJ37
>>
>>
>> http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347&nm_mc=EMC-IGNEFL072111&cm_mmc=EMC-IGNEFL072111-_-EMC-072111-Index-_-DesktopMemory-_-20145347-L04A
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>


>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>
___
For more information regarding industry lead

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Erwan Erwan

hi Adil,
 
My issue is not able to load Application service mva. 
I load this 
 
application
  service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 
and gave me the error:
 
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -5=internal client transmit error
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A3668DC
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A3668DC
*Jul 21 10:52:15.755: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 
 
 
 
It has nothing to do with dial-peer for for this to be able to download. 
 


--- On Fri, 7/22/11, Adil Shaikh  wrote:


From: Adil Shaikh 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Erwan Erwan" 
Cc: ccie_voice@onlinestudylist.com
Received: Friday, July 22, 2011, 8:09 AM



hi erwan, 
 
if your router is an H323 and you are getting inbound for Mobile Voice Access, 
you need 'service mwa' command on POTS dial-peer which has incoming-called 
number 3000. 
you do not need the same command on voip dial-peer. 
 
You will always need 'application' 'service mwa http://..'  
 
Please post full config of router and let us know what have you configured on 
Call Manager (including service parameters) for MVA.
 
-adil

 
On Fri, Jul 22, 2011 at 5:48 AM, Erwan Erwan  wrote:






Adil,
tks for help, so u mean i do not need this command for h323?
 
"application"  service mwa  http://x.x.x.x
 
 
- this is nothing to do until dialpeer level, this issue come up when load the  
applicatio service  .

--- On Thu, 7/21/11, Adil Shaikh  wrote:


From: Adil Shaikh 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Erwan Erwan" 
Cc: ccie_voice@onlinestudylist.com
Received: Thursday, July 21, 2011, 3:00 PM






hi Erwan, 
 
is this H323 gateway or MGCP gatway?
 
if this is H323 gateway you do not need to do hairpinning, 
 
if mgcp then you need to do hairpinning, 
 
 
most likely, you are getting error message due to 'server mwa' command in voip 
and pots dialpeer. 
 
could you please post your full config of this router. 
 
thanks
-adil 
 


 
On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:






hi Vik and others,
 
Have you ever encounter this on proctor rack.   Router will not load the MVA 
application.
 
( i have reset PUB and router ,still same)
 
Wondering if this is VM bug or proctor ruouter error  and what is  the 
workaround ?
 

Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -5=internal client transmit error
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A3668DC
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A3668DC
*Jul 21 10:52:15.755: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 


--- On Thu, 7/21/11, Erwan Erwan  wrote:


From: Erwan Erwan 
Subject: MVA load issue in proctor rack
To: vma...@ipexpert.com
Cc: supp...@ipexpert.com
Received: Thursday, July 21, 2011, 1:09 AM







hi Vik,
 
I have encountered sevreral times, running MVA application (this always work 
most time in rack). In rack 11, I have this issue and other rack not remember.
 
- I have reset and restart UCM PUB , reload router, check connectivity from  
router to PUB
 
but still give me failed on load MVA
 
here is my error
==
l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -2=internal client timeout error
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A829DAC
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A829DAC
*Jul 20 03:31:45.271: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
 
 
version of pod 11

ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
System restarted at 19:07:10 CDT Tue Jul 19 2011
System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
 
 
config
---
application 
service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml 
  
dial-peer voice 410 voip 
 service mwa 
 destination-pattern 3000 
 voice-class codec 1 
 session target ipv4:10.10.210.10 
 dtmf-relay h245-alphanumeric 
 no vad 
  
  
dial-peer voice 4101 pots 
 service mwa 
 incoming called-number 3000 
  















voice service voip 
 allow-connections h323 to h323 
 allow-connections h323 to sip 
 allow-connections sip to h323 
 allow-connections sip to sip 












 
 
 



















___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack -config

2011-07-21 Thread Erwan Erwan

and here is my config (when I able to load mva , i have no issue for receive 
and outgoing call in MVA) 
 
This is work all the time, if I able to  load the MVA
 

application
  service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
  !
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
!
dial-peer voice 410 voip
 service mwa
 destination-pattern 2999
 session target ipv4:10.10.210.10
 dtmf-relay h245-alphanumeric
 no vad
!
dial-peer voice 4101 pots
 service mwa
 incoming called-number 2999
!
 
UCM  serv paramter : 2999,  also MVA  in UCM  2999
 
This is H323 MVA.

--- On Fri, 7/22/11, Adil Shaikh  wrote:


From: Adil Shaikh 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Erwan Erwan" 
Cc: ccie_voice@onlinestudylist.com
Received: Friday, July 22, 2011, 8:09 AM



hi erwan, 
 
if your router is an H323 and you are getting inbound for Mobile Voice Access, 
you need 'service mwa' command on POTS dial-peer which has incoming-called 
number 3000. 
you do not need the same command on voip dial-peer. 
 
You will always need 'application' 'service mwa http://..'  
 
Please post full config of router and let us know what have you configured on 
Call Manager (including service parameters) for MVA.
 
-adil

 
On Fri, Jul 22, 2011 at 5:48 AM, Erwan Erwan  wrote:






Adil,
tks for help, so u mean i do not need this command for h323?
 
"application"  service mwa  http://x.x.x.x
 
 
- this is nothing to do until dialpeer level, this issue come up when load the  
applicatio service  .

--- On Thu, 7/21/11, Adil Shaikh  wrote:


From: Adil Shaikh 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Erwan Erwan" 
Cc: ccie_voice@onlinestudylist.com
Received: Thursday, July 21, 2011, 3:00 PM






hi Erwan, 
 
is this H323 gateway or MGCP gatway?
 
if this is H323 gateway you do not need to do hairpinning, 
 
if mgcp then you need to do hairpinning, 
 
 
most likely, you are getting error message due to 'server mwa' command in voip 
and pots dialpeer. 
 
could you please post your full config of this router. 
 
thanks
-adil 
 


 
On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:






hi Vik and others,
 
Have you ever encounter this on proctor rack.   Router will not load the MVA 
application.
 
( i have reset PUB and router ,still same)
 
Wondering if this is VM bug or proctor ruouter error  and what is  the 
workaround ?
 

Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -5=internal client transmit error
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A3668DC
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A3668DC
*Jul 21 10:52:15.755: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 


--- On Thu, 7/21/11, Erwan Erwan  wrote:


From: Erwan Erwan 
Subject: MVA load issue in proctor rack
To: vma...@ipexpert.com
Cc: supp...@ipexpert.com
Received: Thursday, July 21, 2011, 1:09 AM







hi Vik,
 
I have encountered sevreral times, running MVA application (this always work 
most time in rack). In rack 11, I have this issue and other rack not remember.
 
- I have reset and restart UCM PUB , reload router, check connectivity from  
router to PUB
 
but still give me failed on load MVA
 
here is my error
==
l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
error -2=internal client timeout error
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 0x4A829DAC
*Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 0x4A829DAC
*Jul 20 03:31:45.271: Could not load IVR script
  http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
 
 
version of pod 11

ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
System restarted at 19:07:10 CDT Tue Jul 19 2011
System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
 
 
config
---
application 
service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml 
  
dial-peer voice 410 voip 
 service mwa 
 destination-pattern 3000 
 voice-class codec 1 
 session target ipv4:10.10.210.10 
 dtmf-relay h245-alphanumeric 
 no vad 
  
  
dial-peer voice 4101 pots 
 service mwa 
 incoming called-number 3000 
  















voice service voip 
 allow-connections h323 to h323 
 allow-connections h323 to sip 
 allow-connections sip to h323 
 allow-connections sip to sip 












 
 
 



















___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com



-- 

  .

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

2011-07-21 Thread Erwan Erwan

hi Ash,
 
Thanks, this is very make sense. I will test in my next session.
I was able to ping from router to PUB 10.10.210.10. 
 
I have loaded with basic image in proctor rack,should not be any ACL blocking 
it,
And from their diagram it only show BR router connect thru FR to PUB.
 
tks

--- On Thu, 7/21/11, Ashraf Ayyash  wrote:


From: Ashraf Ayyash 
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: "Adil Shaikh" 
Cc: "Erwan Erwan" , ccie_voice@onlinestudylist.com
Received: Thursday, July 21, 2011, 4:09 PM


Hello  All ,

This error indicates that while loading the script, the VXML file
IVRMainpage.vxml failed to be downloaded from 10.10.210.10:8080 (HTTP
GET).

maybe a  firewall in the network is blocking the request from your GW
interface  to 10.10.210.10:8080 or the GET HTTP souce ip is the reason
of this problem but finally this is a connectivity issue  ,

i have seen some other post here for people who have MVA VXML loaded
but they have another issue , not sure how proctor lab is working
internal but this is the reason of the fail of loading the VMXL script
,

you can Telnet/ping/traces route using specific interface sources etc..
if you found that there router to 10.10.210.10 is routable from
specific source you can add static route for 10.10.210.10 via the
routable interface .

#The reason for the static route is because of the fact that the
router will always use the interface closest to the destination, there
is no
command to bind the http to an specific interface so static route can
be a solution for such situations

Best regards
Ash


On Thu, Jul 21, 2011 at 10:00 AM, Adil Shaikh  wrote:
>
> hi Erwan,
>
> is this H323 gateway or MGCP gatway?
>
> if this is H323 gateway you do not need to do hairpinning,
>
> if mgcp then you need to do hairpinning,
>
>
> most likely, you are getting error message due to 'server mwa' command in 
> voip and pots dialpeer.
>
> could you please post your full config of this router.
>
> thanks
> -adil
>
>
>
> On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan  wrote:
>>
>> hi Vik and others,
>>
>> Have you ever encounter this on proctor rack.   Router will not load the MVA 
>> application.
>>
>> ( i have reset PUB and router ,still same)
>>
>> Wondering if this is VM bug or proctor ruouter error  and what is  the 
>> workaround ?
>>
>> 
>> Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
>> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
>> error -5=internal client transmit error
>> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 
>> 0x4A3668DC
>> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 
>> 0x4A3668DC
>> *Jul 21 10:52:15.755: Could not load IVR script
>>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>> --- On Thu, 7/21/11, Erwan Erwan  wrote:
>>
>> From: Erwan Erwan 
>> Subject: MVA load issue in proctor rack
>> To: vma...@ipexpert.com
>> Cc: supp...@ipexpert.com
>> Received: Thursday, July 21, 2011, 1:09 AM
>>
>> hi Vik,
>>
>> I have encountered sevreral times, running MVA application (this always work 
>> most time in rack). In rack 11, I have this issue and other rack not 
>> remember.
>>
>> - I have reset and restart UCM PUB , reload router, check connectivity from  
>> router to PUB
>>
>> but still give me failed on load MVA
>>
>> here is my error
>> ==
>> l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of 
>> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc 
>> error -2=internal client timeout error
>> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: 
>> 0x4A829DAC
>> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: 
>> 0x4A829DAC
>> *Jul 20 03:31:45.271: Could not load IVR script
>>   http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>> version of pod 11
>> 
>> ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011
>> System restarted at 19:07:10 CDT Tue Jul 19 2011
>> System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin"
>>
>>
>> config
>> ---
>>
>> application
>>
>> service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>>
>>
>>
>> dial-peer voice 410 voip
>>
>>  service mwa
>>
>>  destination-pattern 3000
>>
>>  voice-class codec 1
>>
>>  session target ipv4:10.10.210.10
>>
>>  dtmf-relay h245-alphanumeric
>>
>>  no vad
>>
>>
>>
>>
>>
>> dial-peer voice 4101 pots
>>
>>  service mwa
>>
>>  incoming called-number 3000
>>
>>
>>
>> voice service voip
>>
>>  allow-connections h323 to h323
>>
>>  allow-connections h323 to sip
>>
>>  allow-connections sip to h323
>>
>>  allow-connections sip to sip
>>
>>
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.Platinu

[OSL | CCIE_Voice] unable to receive any calls on SOME IP Phones..

2011-07-21 Thread Rashid Khan

Hi Friends,

I am facing issue with some IP Phones, these phones are able to places any 
calls 
but unable to receive any incoming calls; neither internal call nor calls from 
outside network. Also when I search for these phones in CallManager 4.2 search, 
there status is shown is UNKNOWN rather than showing IP address of Subcriber.

Kindly help me, I am receiving too many calls from users.

Regards
Rashid.___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

[OSL | CCIE_Voice] Memory for your VM

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960] CME SIP QUESTION.

[OSL | CCIE_Voice] Software versions

[OSL | CCIE_Voice] 1:1 pre-lab class

Re: [OSL | CCIE_Voice] 1:1 pre-lab class

Re: [OSL | CCIE_Voice] Software versions

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

[OSL | CCIE_Voice] QoS bandwidth calculations

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] QoS bandwidth calculations

Re: [OSL | CCIE_Voice] 1:1 pre-lab class

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

Re: [OSL | CCIE_Voice] Memory for your VM & VMware follow up.

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack -config

Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack

[OSL | CCIE_Voice] unable to receive any calls on SOME IP Phones..

27 matches

Site Navigation

Mail list logo

Footer information