Changes in CCNP Courses?? [7:55085]
Hi All, Below is a statement made by one of the members: ..One caveat though, all the exams are changing in the near future, with Switching and CIT undergoing the greatest change, so what I said above may not be valid in the future... Do you have any idea what the changes are to be and when... so that I can hurry up my CCNP studies? Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55085t=55085 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Enable Secret of AS5300 [7:55086]
Hi group I lost the enable secret password of my Cisco AS5300.I have the configuration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp. enable password 7 110A1016141D5A Any idea to decrypt this password. Thanks in advance _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55086t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Outlets England [7:53864]
Great Britain Wiring I got to England after a long 15-hour trip ... On my arrival I immediately went to a Electric shop to buy British Power Cord. Those are relatively cheap about 2 pounds something each, but I needed 12 of those for my equipment. The lad other there was very kind, he told me that I could make my own cord from my American Power cord using a socket that only cost half a pound. Here how it goes in England: Green or Yellow is grown Blue or Blank is neutral Brown or Red is live The process is pretty simple but quite time consumming: with a sharp knife to strip the wires, a flat screw driver and a Philips screw driver I made a plug every 10 minutes) I also bought surge protectors at the store. They are not cheap out there (about 8 pounds for a 4-plugs surge protector and 12 pounds for 6-plugs). Basically my total cost of conversion was: 6 pounds for the plugs + 48 pounds for the surge protectors (less than $100) ... Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55087t=53864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Enable Secret of AS5300 [7:55086]
there are tools for this all over the web. your enable password is cisco1 Tim Danial Morison wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi group I lost the enable secret password of my Cisco AS5300.I have the configuration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp. enable password 7 110A1016141D5A Any idea to decrypt this password. Thanks in advance _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55088t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Enable Secret of AS5300 [7:55086]
Yeah thanks..but I cant reboot this router for password recovery at the moment. thx DA' From: richard bosire To: Danial Morison Subject: Re: Enable Secret of AS5300 [7:55086] Date: Tue, 8 Oct 2002 13:04:43 +0300 Not sure about the decrypting part, But you can recover the password http://www.cisco.com/warp/public/474/index.shtml regards ./bosire On Tuesday 08 October 2002 12:56 pm, you wrote: Hi group I lost the enable secret password of my Cisco AS5300.I have the configuration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp. enable password 7 110A1016141D5A Any idea to decrypt this password. Thanks in advance _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Nondisclosure violations to [EMAIL PROTECTED] _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55089t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Enable Secret of AS5300 [7:55086]
If you have phisical access to the box, just do a password recovery. On Tue, Oct 08, 2002 at 09:56:01AM +, Danial Morison wrote: Hi group I lost the enable secret password of my Cisco AS5300.I have the configuration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp. enable password 7 110A1016141D5A Any idea to decrypt this password. Thanks in advance _ Chat with friends online, try MSN Messenger: http://messenger.msn.com -- HoraPe --- Horacio J. Peqa [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55090t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDP Recert Exam #640-529 [7:55091]
Has anyone taken the CCDP Recert Exam yet? If so then I was wondering what you used to prepare for it. Thanks. - John A. Gesualdi,CCNP, CCDP, MCSE 2000 [EMAIL PROTECTED] The Providence Journal Company Phone (401)277-8133 Pager (401)785-6938 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55091t=55091 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bonding of Multiple ISDN B-Channels [7:55092]
Hi. Could anyone tell me what router / interface to use and what I would need to configure in order to bond up to 4 ISDN B-channels based on bandwidth needs? Sample configuration? Thanks Kerpal Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55092t=55092 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Bonding of Multiple ISDN B-Channels [7:55092]
Dialer -- David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kerpal.Abdar Sent: Tuesday, October 08, 2002 9:08 AM To: [EMAIL PROTECTED] Subject: Bonding of Multiple ISDN B-Channels [7:55092] Hi. Could anyone tell me what router / interface to use and what I would need to configure in order to bond up to 4 ISDN B-channels based on bandwidth needs? Sample configuration? Thanks Kerpal Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55093t=55092 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Inside Interface accepts DHCP lease...but it has a static [7:55094]
There is a router/modem connecting to the ISP using PPoA. This router was in place and works...the customer just wanted some packet filtering as well ( which the router in place does not provide ). So I am using a Cisco SOHO 71. E1 is the outside interface which connects to the inside interface of the existing router. E1 has a static ip of 172.16.0.2 ( there is no ip address dhcp it is ip address 172.16.0.2 255.255.255.0 E0 has ip address 192.168.0.9 255.255.255.0 There is a static route on the existing ( non Cisco ) router pointing all 192.168.0.0/24 destined traffic back to 172.16.0.2 ( E1 of Cisco ). There is also a default route on the cisco pointing to 172.16.0.1 ( the inside interface of the non-cisco router ) The non-cisco router does NAT INTERNET-WANinterface(non-Cisco Router)172.16.0.1(inside) | | Win2000Server(DHCP)--|--192.168.0.9(E0)(Cisco SOHO71)172.16.0.2(E1) | | LAN Every few days ( there doesn't seem to be an exact regularity yet), interface E0's ip address will change. So far it has always changed to 192.168.0.16. If I view the DHCP Manager in Windows 2000 Server, it indicates that IP address associated with the router. The config of e0 ( when working normal) looks like this: Interface Ethernet 0 ip address 192.168.0.9 255.255.255.0 Any ideas??? I think I will configure syslog debugging level and turn on dhcp debugging. With that I should get at very least the moment that the address changes...and hopefully some dhcp debug output. I suppose I could also put a sniffer in and try to detect it. Thanks Erick B. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... That is strange. What type of router and IOS version? Just to clarify, the interface has 'ip address x.x.x.x y.y.y.y' config and not 'ip address dhcp' with a static DHCP assigned address. Being DSL, is it PPPoE by chance? Does e0 connect to DSL/Internet and e1 to their network or vice versa? --- Dain Deutschman wrote: Hi all, I have a problem with a client on a dsl connection. Ethernet 0 and 1 both have statically assigned IP addresses. I leave the customer site and 3 days later they call and have no internet. I check the router config and E0 has the wrong IP address. I check the Win2000 DHCP server and that address is listed as leased to the router. Any ideas why the router is allowing this to happen? -- Dain Deutschman CNA, MCP, CCNA Data Communications Manager [EMAIL PROTECTED] __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55094t=55094 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Bonding of Multiple ISDN B-Channels [7:55092]
here is a starter: interface BRI3/0 description ISDN CKT#__ ISDN backup to Bristol's BRI3/0 bandwidth 128 no ip address ip load-sharing per-packet encapsulation ppp dialer pool-member 1 isdn switch-type basic-ni isdn spid1 509 xxx isdn spid2 509 xxx no fair-queue ppp authentication chap ! interface BRI3/1 description ISDN CKT#__ ISDN backup to Bristol's BRI3/1 bandwidth 128 no ip address ip load-sharing per-packet encapsulation ppp dialer pool-member 1 isdn switch-type basic-ni isdn spid1 509xxx xxx isdn spid2 509xxx xxx no fair-queue ppp authentication chap ! interface BRI3/2 description ISDN CKT#__ ISDN backup to Bristol's BRI3/2 bandwidth 128 no ip address ip load-sharing per-packet encapsulation ppp no ip mroute-cache dialer pool-member 1 isdn switch-type basic-ni isdn spid1 509xxx xxx isdn spid2 509xxx xxx no fair-queue ppp authentication chap ! interface BRI3/3 no ip address shutdown isdn switch-type basic-ni ! interface Dialer1 ip address 10.100.200.1 255.255.255.0 ip load-sharing per-packet encapsulation ppp no ip mroute-cache dialer remote-name CL_Bristol dialer pool 1 dialer idle-timeout 60 dialer string 1215xxx dialer string 1215xxx dialer string 1215xxx dialer string 1215xxx dialer string 1215xxx dialer string 121xxx dialer load-threshold 3 either dialer max-call 6 dialer-group 1 ipx network FBEEF ppp authentication chap ppp multilink Dave \\Kerpal.Abdar\\ wrote: Hi. Could anyone tell me what router / interface to use and what I would need to configure in order to bond up to 4 ISDN B-channels based on bandwidth needs? Sample configuration? Thanks Kerpal -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55095t=55092 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to interpret lab score [7:55081]
Interpret your lab score? You'll either pass, or you'll fail. If you pass, you wont get a score, just the fact that you passed. If you fail, you will get a score. Here's my interpretation of the scoring if you fail (please note, sarcasm to follow) 70-80 Close, but close only counts in horse shoes and hand grenades. Take it again asap 50-70 Doh! Guess you havent used much BGP, eh? 30-50 You're not the sharpest pencil in the box. Better hit the rack. 10-30 Have a few too many the night before? ISPF, OIGRP, same difference. 0-10 Maybe you should apply for the honorary CCIE cert instead... thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) Edward Sohn wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello, all I'll be taking my lab in a few weeks, and I want to make sure I understand how the scoring system works. I've seen a lot of differing opinions and reports on the subject, and I was wondering if there was an accurate way to interpret the score. For example, I understand that there is a percentage breakdown. How does this translate into a passing/failing grade? I don't *think* I am violating any NDA rules in asking this question. Obviously, please respond within that context. Thanks in advance, Ed Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55083t=55081 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: E-books [7:55001]
Over here in South Africa, Cisco books are sold at a minimum of a R1000.00 although some of them reach R1600.00 each That is a lot of money for us. For example, our exchange rate is R10.52 to $1.00 so even if the book RRP is $50.00, we will pay R900.00 for it. Then we still have to pay shipping which sometimes is nearly equivalent to price of the book itself. Reading most of the Cisco Press books, I've realised how much of the same stuff is sometimes regurgitated amongst them. Now I have a huge cisco press library, that was bought from a CCIE, and I still buy books (the real kind), but I don't see the sense in buying some cisco press book for the high price of R1000.00 when I know I will only read them once. For those books, I would prefer to have them in PDF format, at a reasonable price. I understand the piracy thing, it's just to easy to email a pdf of the book. But for me to pay $50.00 for a virtual copy of the book does not make sense. In that case, I'll would rather pay for the shipping and get the real thing ... After all a bookshelf full of cisco press books in their trademark green looks very sexy, and initimidates the sh!t out of everyone else, when you tell them you've read them all! (obviously, it's even better if you remember it all!) The other thing also affect us, is the shipping, after paying a huge amount for a book, custom's get's hold of it, charges us more, and hopefully, then our postal system delivers the book (if they don't steal it). I bought Doyle' TCP Vol2, and the first one got missing, after which amazon had to send another copy ... Life is sometimes just not fair for those of us not in the U.S.A ! BTW, Adobe has a lot of sexy 'rights management technologies'. If you create e-books, you can lock it to a specific user. The e-book will be unreadable anywhere else. Although this has already probably been cracked! :-( Just my take on it. Manish -Original Message- From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]] Sent: 08 October 2002 04:57 To: [EMAIL PROTECTED] Subject: Re: E-books [7:55001] I haven't looked into how Cisco Press is doing their online books. I think you have to subscribe or something. The publishers are interested in technical feedback on what works for people. They know they need to address the need for electronic access at a reasonable price. Most of them are kind of fumbling around trying to figure this out. If there's legitimate reasons for liking PDF, I think that's good feedback. I doubt they'll use PDF, though, because it's too easy to share. The publishers will definitely need to make money on the electronic products and they will want to minimize easy access to the products by people who want to get something for nothing, or, worse, people who want to sell the publisher's property without the publisher's consent. Hey, I'm beginning to sound like a lawyer. Seriously, there's lots of room for innovation here with results that please the customer and make business sense for the publisher. Now I sound like a marketer. From an author's point of view, I want people to see all that content I worked so hard on. The money is nice but so small, it's secondary. ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Ken Chipps wrote: I like pdf format myself. I often print out a few pages or a chapter to study from. Then I can highlight different parts for different areas of study. This avoids messing up the original book. I have done this may times with the Lanmmle books, all of which I paid for myself. In fact, I am doing this right now as I leave for class. I need to brush up on VLAN configuration. While the students are doing a lab on their own, I will be reviewing VLAN information so I can create a new lab for VLANs in a CAN. I wish all books came hardcover and pdf. Ben W wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Yes you can, and you can also read it on your laptop which weighs a lot less than lugging around Caslow and Doyle's books. Give the guy a break. He did ask in his email of any website that SELLS pdf formats of books. Michael Linehan wrote: You can't read a book on a plane??? - Original Message - From: Ellis, Andrew To: 'Michael Linehan' ; Sent: Monday, October 07, 2002 2:53 PM Subject: RE: E-books [7:55001] or maybe he wants to read it on his laptop while commuting. -Drew :^) -Original Message- From: Michael Linehan [mailto:[EMAIL PROTECTED]] Sent: Monday, October 07, 2002 3:17 PM To: [EMAIL PROTECTED] Subject: Re: E-books [7:55001] I know you know this already but the only logical conclusion is that he wants PDF format so its easily illegally copied and distributed. This of course places him directly in what I like to call the get it for free, society. - Original Message -
Re: $1000.00 a Day for the Practise Labs now?? Wh [7:55082]
wow, that's kind of high. with remote rack prices so cheap, what's the point??? thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) Cisco Nuts wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello, BTW: Looks like Cisc has bumped up the fees for the CCIE Practice Labs to $1000.00 per day!! I thought it was something like $250.00 a day before. What's up with Cisco? Q: How much does it cost to use the CCIE Practice Labs? A: Contact the University CCIE Practice Labs for fees, refund and scheduling policies. Cisco CCIE Lab facilities may be scheduled for a cost of $1000 per day. Come'on Cisco.Are you kidding?? For that kind of money, I would attempt the Lab once every month till I pass it?? Anyone ?? MSN Photos is the easiest way to share and print your photos: Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55082t=55082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cables [7:55096]
Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55096t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Route-map questions [7:55098]
Hello Group, I try to create a simple configuration for a company that have two internet connections, and also i want some users to use one internet provider and others the second ISP. I created a route-map as following. access-list 5 permit 172.16.1.0 0.0.0.255 access-list 6 permit 172.16.2.0 0.0.0.255 route-map internet permit 10 match ip address 5 set ip next-hop address_ISP_1 address_ISP_2 route-map internet permit 20 match ip address 6 set ip next-hop address_ISP_2 address_ISP_1 All thinks are working but I have problem when the link on one interface is going down but the interface is still up. How I can resolve this? it is somethink like HSRP tracking that i can use? Regards Stefan Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55098t=55098 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Migration Plan (6509) [7:55064]
Sounds like you might want to check this seminar out. I guess you can contact your local Cisco Sales team to gain access info to the seminar. - Paul http://www.ciscopep.com/reglogin.lasso?event_id=PE9606457 --- Register now for the Cisco Catalyst 5000 Migration Program E-seminar at: ciscopep.com/reglogin.lasso?event_id=PE9606457 Now is the time to migrate your customers from the Catalyst 5000 to a Catalyst 4000/4500 or 6500. To assist you with this migration process Cisco has created a comprehensive program to provide you with the tools needed to identify, prepare, and migrate your customer base. Learn how you can successfully migrate your customers by attending the Catalyst 5000 E-Seminar. At this live E-seminar you will: Understand the details of the Catalyst 5000 migration program Hear about sales tools to prepare you to migrate your customers Learn how you can resolve your customers business issues by migrating their infrastructure Pose questions about the program directly to the Cisco Catalyst Switching product teams Broadcast Details: Date: Thursday, October 10 Time:10:00 a.m. Pacific Time Registration URL: ciscopep.com/reglogin.lasso?event_id=PE9606457 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55097t=55064 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISP vpn configuration [7:55099]
I have been trying to get an answer to this question with out luck, the question is, If I am running an ISP and a company has a connection to me, now someone from that company wants to use a vpn connection from the internet to connect to his company through me, and I have a PIX to accept his VPN connection, how can I tell my PIX to only send that user to his company and not the rest of my network. please let me know if anyone knows somthing about this. Best regards, Arni Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55099t=55099 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cables [7:55096]
Cross-over =1 3roll-over = 1 8 2 62 - 7 3 13 - 6 4 54 - 5 5 45 - 4 6 26 - 3 7 87 - 2 8- 7 8 - 1 maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. Raul Renteria (CCNA,CCDA,CCNP) DJ1Integration. NY,NY. 10016 - Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, more faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55100t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cables [7:55096]
In my mind a rollover is a mirror image, i.e. 1-8, 2-7, 3-6, etc... whereas a crossover crosses over specific wires for a specific purpose, T1 crossover is not the same as a 56K xover is not the same as an ethernet crossover etc... Dave maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55101t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Which IOS version has the DHCP server software? [7:55102]
Which IOS release has the DHCP server software? It is for a 25xx router. IP IP PLUS IP ENTERPRISE IP SP Thanks... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55102t=55102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certification Digest V2 #2284 (Out of the Office) [7:55104]
I will on vacation starting October 5 and will be returning to the office on October 15, 2002. Thanks, Danny Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55104t=55104 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certification Digest V2 #2284 [7:55105]
does that mean I'm a CCNA? --- Cisco Certification Digest wrote: Cisco Certification Digest Tuesday, October 8 2002 Volume 02 : Number 2284 In this issue of the Cisco Certification Mailing List Digest: RE: E-books [7:55001] Re: E-books [7:55001] DQoS Course Book [7:55054] Re: Even more confused: Was: New CCIE Lab Policy?? [7:55046] RE: NAT question? [7:55043] Re: E-books [7:55001] Re: Cisco Certification Digest V2 #2283 (Out of the Office) [7:55058] Re: NAT question? [7:55043] Re: Even more confused: Was: New CCIE Lab Policy?? [7:55046] Re: E-books [7:55001] Re: Even more confused: Was: New CCIE Lab Policy?? Why?? [7:55062] Re: Upgrade memory in Native mode [7:55063] Migration Plan (6509) [7:55064] Re: Route-map question (urgent) [7:54910] Re: Inside Interface accepts DHCP lease...but it has a static [7:55066] Message for [EMAIL PROTECTED] (Jim) [7:55067] Recall: Message for [EMAIL PROTECTED] (Jim) [7:55068] Re: CCIE written revised [7:53972] Re: E-books [7:55001] RE: Tech Tips [7:55015] Network security on Frame Relay, ATM and IP netwoks [7:55073] Re: E-books [7:55001] Re: OT: CSCO stock [7:54957] Re: Flash Memory and DRAM [7:55009] Security inside TPIPS cloud [7:55074] RE: redundant power feed for 3548 XL [7:54988] Re: IDS Sensor action [7:54762] Re: Migration Plan (6509) [7:55064] Re: How to restrict hubs in a LAN [7:54937] RE: Tech Tips [7:55080] how to interpret lab score [7:55081] Changes in CCNP Courses?? [7:55085] Enable Secret of AS5300 [7:55086] RE: Outlets England [7:53864] Re: Enable Secret of AS5300 [7:55086] Re: Enable Secret of AS5300 [7:55086] Re: Enable Secret of AS5300 [7:55086] CCDP Recert Exam #640-529 [7:55091] Bonding of Multiple ISDN B-Channels [7:55092] RE: Bonding of Multiple ISDN B-Channels [7:55092] Re: Inside Interface accepts DHCP lease...but it has a static [7:55094] Re: Bonding of Multiple ISDN B-Channels [7:55092] Re: how to interpret lab score [7:55081] Re: $1000.00 a Day for the Practise Labs now?? Wh [7:55082] RE: E-books [7:55001] Cables [7:55096] RE: Migration Plan (6509) [7:55064] Route-map questions [7:55098] ISP vpn configuration [7:55099] Re: Cables [7:55096] Re: Cables [7:55096] Which IOS version has the DHCP server software? [7:55102] -- Date: Mon, 7 Oct 2002 19:53:33 GMT From: Ellis, Andrew Subject: RE: E-books [7:55001] or maybe he wants to read it on his laptop while commuting. - -Drew :^) - -Original Message- From: Michael Linehan [mailto:[EMAIL PROTECTED]] Sent: Monday, October 07, 2002 3:17 PM To: [EMAIL PROTECTED] Subject: Re: E-books [7:55001] I know you know this already but the only logical conclusion is that he wants PDF format so its easily illegally copied and distributed. This of course places him directly in what I like to call the get it for free, society. - - Original Message - From: Priscilla Oppenheimer To: Sent: Monday, October 07, 2002 1:42 PM Subject: Re: E-books [7:55001] WHY do you want PDF format? Aser Anani wrote: yes Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Why do you want PDF format? Aser Anani wrote: nothing in PDF format Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Aser Anani wrote: Hi there , does anybody know a website that sell PDF format cisco books , i am looking for Caslow Bridging book Routing TCP/IP by Doyle Vol I Thanks Go to www.ciscopress.com and click on the Online Books tab. Priscilla Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.393 / Virus Database: 223 - Release Date: 10/3/2002 [EMAIL PROTECTED] -- Date: Mon, 7 Oct 2002 19:59:20 GMT From: Michael Linehan Subject: Re: E-books [7:55001] You can't read a book on a plane??? - - Original Message - From: Ellis, Andrew To: 'Michael Linehan' ; Sent: Monday, October 07, 2002 2:53 PM Subject: RE: E-books [7:55001] or maybe he wants to read it on his laptop while commuting. -Drew :^) -Original Message- From: Michael Linehan [mailto:[EMAIL PROTECTED]] Sent: Monday, October 07, 2002 3:17 PM To: [EMAIL PROTECTED] Subject: Re: E-books [7:55001] I know you know this already but the only logical conclusion is that he wants PDF format so its easily illegally copied and distributed. This of course places him directly in what I like to call the get it for free, society. - Original
Re: how to interpret lab score [7:55081]
I would focus more on getting 80 points then worrying about how the score breaks down. At 05:36 AM 10/8/2002 +, Edward Sohn wrote: Hello, all I'll be taking my lab in a few weeks, and I want to make sure I understand how the scoring system works. I've seen a lot of differing opinions and reports on the subject, and I was wondering if there was an accurate way to interpret the score. For example, I understand that there is a percentage breakdown. How does this translate into a passing/failing grade? I don't *think* I am violating any NDA rules in asking this question. Obviously, please respond within that context. Thanks in advance, Ed Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55103t=55081 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cables [7:55096]
Ditto! -ALE check out the sites: http://www.lanshack.com/highlights/makepatch.htm http://www.lanshack.com/highlights/cat5notes.htm http://www.cisco.com/warp/public/701/14.html -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 AM To: [EMAIL PROTECTED] Subject: Re: Cables [7:55096] In my mind a rollover is a mirror image, i.e. 1-8, 2-7, 3-6, etc... whereas a crossover crosses over specific wires for a specific purpose, T1 crossover is not the same as a 56K xover is not the same as an ethernet crossover etc... Dave maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55106t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cables [7:55096]
also look at: http://www.gcom.com/home/support/t1crossover.html ALE -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 AM To: [EMAIL PROTECTED] Subject: Re: Cables [7:55096] In my mind a rollover is a mirror image, i.e. 1-8, 2-7, 3-6, etc... whereas a crossover crosses over specific wires for a specific purpose, T1 crossover is not the same as a 56K xover is not the same as an ethernet crossover etc... Dave maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55107t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Which IOS version has the DHCP server software? [7:55102]
I'm pretty sure its the enterprise version, I was looking for the same thing on my 2500s and couldn't find an IOS with it enabled. I didn't have enough RAM/Flash for enterprise so I'm assuming it is enterprise that has it. r34rv13wm1rr0r wrote: Which IOS release has the DHCP server software? It is for a 25xx router. IP IP PLUS IP ENTERPRISE IP SP Thanks... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55108t=55102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone know how to tell the difference? [7:54972]
other than the listed model number on the outside of the router, I don't think there are any differences in physical appearance. The 1721 comes w/16MB of nonupgradable flash, the 1720 comes w/8MB. I've pasted the comparison below-Hope this helps. Cisco 1721 and 1720 Product Comparison Feature Cisco 1721 Cisco 1720 Routing Performance(based on 64-byte packet)12,000 packets per second 8,400 packets per second DRAM (default/maximum)32 MB/96 MB 32 MB/48 MB Flash (default/maximum) 16 MB/16 MB (Nonupgradable) 8 MB/16 MB IEEE 802.1Q VLAN Routing Yes No Encryption Module LED Indicator Yes No Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55109t=54972 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
protocol monitoring software [7:55110]
Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55110t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone know how to tell the difference? [7:54972]
Sorry, my last post's allignment got messed up-here it is again: Cisco 1721 and 1720 Product Comparison Cisco 1720 Cisco 1721 Routing Performance(based on 64-byte packet) 8,400 packets per second 12,000 packets per second DRAM (default/maximum) 32 MB/48 MB 32 MB/96 MB Flash (default/maximum) 8 MB/16 MB(Nonupgradable) 16 MB/16 MB IEEE 802.1Q VLAN Routing YES NO Encryption Module LED Indicator YES NO Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55111t=54972 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Which IOS version has the DHCP server software? [7:55102]
Try http://www.cisco.com/go/fn The feature navigator is a blessing when looking for certain things in an IOS. --- Ben W wrote: I'm pretty sure its the enterprise version, I was looking for the same thing on my 2500s and couldn't find an IOS with it enabled. I didn't have enough RAM/Flash for enterprise so I'm assuming it is enterprise that has it. r34rv13wm1rr0r wrote: Which IOS release has the DHCP server software? It is for a 25xx router. IP IP PLUS IP ENTERPRISE IP SP Thanks... [EMAIL PROTECTED] __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55112t=55102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: FS: AGS+, good lab router [7:54721]
I have one that 8 serial ports, and since I'll be moving shortly, I'll sell mine for the same price. - Original Message - From: Priscilla Oppenheimer To: Sent: Wednesday, October 02, 2002 11:58 AM Subject: RE: FS: AGS+, good lab router [7:54721] I'm suprised it doesn't have any serial ports. Then it would be better. Also, the AGS doesn't run modern versions of IOS. I think the latest you can put on it is version 11.0. This could make it hard to do labs that use new commands. It's very noisy and generates lots of heat and requires lots of power. But the price is good! It's quite bulky, but not too heavy, so shippnig shouldn't be too bad. ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Ben Hockenhull wrote: Cisco AGS+ CSC/4 16 meg of dram 4 meg flash CBUS controller, Environmental controller 12 ethernet interfaces 2 token ring interfaces, 1 FDDI interface Runs perfectly. $100.00 plus shipping Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55113t=54721 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
how to monitor ciscosecure service? [7:55114]
Hi Guys, We use CiscoSecure NT 2.6 to authenticate RAS users. It happened several times that CiscoSecure stopped responding but csauth and cstacacs services were still up. I know there are softwares monitoring services, but it won't solve our problem. Is there a software that can check to see if CiscoSecure is responding? For example to telnet to port 49 to see if cstacacs is working? Thanks. Zhen Cai Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55114t=55114 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Which IOS version has the DHCP server software? [7:55102]
Have a look at the Software Advisor and search by Feature: http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl Search on DHCP Server-Easy IP Phase 2 which is first available in 12.0T, platform specific to some releases. They show it first on the 2500 in 12.0(1)T, and it is available in all feature sets therefore IP should have it. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 t/120t1/easyip2.htm#xtocid138 -- David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 12:59 PM To: [EMAIL PROTECTED] Subject: RE: Which IOS version has the DHCP server software? [7:55102] I'm pretty sure its the enterprise version, I was looking for the same thing on my 2500s and couldn't find an IOS with it enabled. I didn't have enough RAM/Flash for enterprise so I'm assuming it is enterprise that has it. r34rv13wm1rr0r wrote: Which IOS release has the DHCP server software? It is for a 25xx router. IP IP PLUS IP ENTERPRISE IP SP Thanks... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55115t=55102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to monitor ciscosecure service? [7:55114]
In Cisco Secure there is a section to configure what to do if the service stops, is not responsive or hangs. Based on these conditions you can have the service restart etc. I believe the menu path is Systems Configuration then click the ACS Service Management link and you will be presented with options on checking the logging in and service handling options. In the ACS Service Management section there is a sub section with a drop down box to test the login process every x minutes. Based on the test outcome you can select the test to respond in the following ways: Restart All Restart Radius/Tacacs Reboot No action There is an event logging subsection also to add your email address and SMTP server to send you an email when issues occur. I remember using even earlier options of Cisco Secure and this option was not available. The service would hang periodically and the only way to restart it was in NT or 2k services utility. I believe Cisco added this option as a kludge to get around customer having to do it manually whenever Cisco Secure would lock up. It works. I do not know if they fixed those types of problems in 3.X or the Service Management link is still included.. /JS Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55117t=55114 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to restrict hubs in a LAN [7:54937]
Thanks for the details, Chuck. The number of MAC addresses that a switch can learn can indeed be an issue, although the number tends to be pretty big these days. It's helpful to know that the actual number depends on features that are enabled, amount of memory, etc. It's worth giving some thought to what happens if a switch can't remember all the addresses that it sees... Thought. Thought. and doesn't store all the addresses in a bridging table that says which port to use Thought. Thought. The switch floods! When frames arrive with a destiation MAC address that is not in the bridging table, the switch must flood the packet out all interfaces. Needless to say, this wastes bandwidth. Here's a story from Troubleshooting Campus Networks: One of the authors was called in to troubleshoot a hospital campus network consisting of several buildings, star-connected back to a central data center. Each remote building had an edge switch with a fiber connection back to the data center. In the data center it was found that entire bidirectional conversations between clients in remote buildings and servers in the same remote building were visible on the data center backbone. At first it was thought that the forwarding path between a client and server was extending through the data center somehow, which was not the intent of the network design. Upon further analysis, it was discovered that the switches used in the remote buildings only supported 256 MAC addresses in the bridging tables. Consequently, with over 500 users in each remote building, it was common for many addresses to become unknown. The recommendation was made to replace the remote building switches with ones having greater capacity, thereby eliminating the unnecessary traffic on the data center backbone. ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Chuck's Long Road wrote: Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Daren Presbitero wrote: Isn't there a limitation on the number of MACs that a port will handle? Probably, but I bet the number is way bigger than he needs to worry about. There's probably a max number of addresses for generic learning purposes CL: in case anyone is interested, the max number of macs supported on any of the Cisco switches is fluid, depending on other features turned on, amount of memory, etc. . The 3550 documentation states that depending upon the SDM template that is active, one may have anywhere from 2,000 to 12,000 unicast MAC's in the CAM table. I am assuming this means that if you have lots of hubs and switches daisy chanined down the line, that the MAC's of end stations will show up in the root switch CAM. Obviously, if all you have are end stations in a single switch, that number is smaller. CL: this does bring up a good point about size ( number of devices - servers, PC's, and other switches ) in a bridged network. and a max number related to port security, which appears to be 132 from an earlier post. There's also the issue of how many MACs can eat up all of the available 100 Mbps, but once again, that's the user's problem. Won't hubs share all those macs with each port, and possibly cause the max limit to be reached? All the MAC addressess behind the hub will be visible to all the switched ports. Is that what you're getting at? It's a good point. The learning process will need to know about all the MACs. But the max number of MAC addresses that a switch can learn is large and not something he needs to worry about. ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, October 07, 2002 8:20 AM To: [EMAIL PROTECTED] Subject: Re: How to restrict hubs in a LAN [7:54937] David j wrote: See inline.. Chuck's Long Road wrote: as much of a rulemeister as I am, I still have to look at this from the user standpoint. Why are users throwing their own hubs onto the network? Is there a business case to be made? Is facilities too slow getting requested cable pulls done? what is the concern with a user plugging a hub in at the desk and then connected a couple of extra PC's? if the problem is one of dual homing by accident or otherwise, I can see the issue with spanning tree recalculations. But in a single home situation, what do you see as the issues? I see one issue: collisions, if you have a switched network you don't want to deal with collisions that hubs normally produce. I have to recognize, though, that hubs sometimes are very convenient and I'm the first on using them. Collisions
Re: OT: CSCO stock [7:54957]
Yes, we'll need strong business skills and an understanding of the business applications that ride on the networks and actually make some money. Or maybe better muscles. I saw on the news that the Pacific Maritime Association offered the longshoremen a raise for the highest paying job to $137,000. The longshoremen turned it down. Unbelievable. Hey, I'm generally a bleeding liberal, but this port closure thing p!sses me off. Priscilla nrf wrote: Sorry to be so pessimistic. NRF - got anything to add? Oh, I got lots to add. But let me try to keep it short by couching things in the following bullet points: *If you want money, somebody has to be ultimately paying. Money in, money out. Cisco is not a mint. No vendor is a mint. Cisco can only earn money sustainably if their customers are making money. And not just making money, but making money by using Cisco gear. You can only get money out if there is money coming in. Is that really happening? Let me explain. Let's look at the Internet. Many studies have shown a boom in Internet usage. A boom in traffic. A boom in users. A boom in time spent on the Internet. In all categories there is a boom, except for the one category that matters - a boom in profits. How many dotcoms actually make money? Few, very few. How many service-providers actually make profit from providing Internet access? Again, few, very few. If you tally the aggregate of all the profit and losses derived from Internet operations, you will see that the Internet has been nothing but a financial debacle of the first order. A business model where you, as a vendor, are making record profits while many of your customers are unprofitable is a business model that is unsustainable. True, Cisco is not just all about the Internet. So let's look at Cisco's bread-and-butter - the enterprise customer. Enterprises will continue to invest in their network only to the degree that it is profitable to do so. Has Cisco, or any other networking vendor, been able to demonstrate a solid ROI from upgrading the network?In many cases, no. Companies don't just build out networks 'for fun', they do so because there is a clear business reason to do so. What are these reasons? Now don't get me wrong, I'm not saying that there are no good reasons to do a network buildout. Indeed there are often many good reasons. But my point is that we need engineers who are not only technically strong, but can also articulate a strong business case as to why money should be spent. In short, we engineers need to know more about the business and financial side of things. *How many people really care about the network? By that, I mean how many regular (non-technical) people really care about a network at all? Are they going to be dazzled with mentions of BGP and VoIP and all that crap? Hardly. Regular people care about the services that a network can provide. It is the services that people are willing to pay for, not the network itself. But that begs the question - are there really all these jazzy services out there that regular people are willing to pay for? Before you answer, you may wish to consider the following snippet from the Hart-Winston study: The bottom line is that among people who are most likely to subscribe to high-speed Internet access, the obstacles are price and lack of appeal, said Hart, CEO of Hart Research. Forty-eight percent have no interest regardless of price and another 21 percent are willing to pay at most $20 per month. If you cannot win over the people who are currently using the Internet, consumer acceptance of high-speed access will be slow and limited...Findings about consumer interest in subscribing to high-speed service also apply to those who use it at work, the poll found, indicating that even those exposed to the service find little reason to subscribe at home http://www.comptel.org/press/nov29_2001_voices.html Then of course there was that incident in Oregon where a whole town was offered free broadband for a year, and only half the households signed up (can't find the article unfortunately, but you may wish to talk to Steven Ridder if you want to see it). The point is, at this time, very few regular people actually care about the Internet because there are no truly compelling services out there, and especially not much that people are willing to pay serious money for. * Cisco isn't going anywhere. All the nasty invective aside, the fact is that Cisco holds more of a premier position in the industry than perhaps at any other time. They got billions of dollars in the bank, and very importantly, no debt. The disaster of the service-provider market was something of a godsend to Cisco in the sense that it has crushed its competitors like Nortel and Lucent. Just a few years ago there was talk of how Cisco was going to have
Re: Which IOS version has the DHCP server software? [7:55102]
Hi, For DHCP on 25xx you'll need at least 12.x IP. Regards Igor r34rv13wm1rr0r wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Which IOS release has the DHCP server software? It is for a 25xx router. IP IP PLUS IP ENTERPRISE IP SP Thanks... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55119t=55102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame LMI [7:55120]
Any way I can get a more complete look at my Frame LMI than debug gives me? I would take the complete frame and manually decode it if I could figure out how to capure it. This is on a production router but it is lightly loaded so reasonable debugs are possible. If only I had a Sniffer... but I just have my trusty Cisco. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55120t=55120 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone know how to tell the difference? [7:54972]
After checking my routers I found that the show version does differentiate between the 1720 and 1721. Hope this helps. Paul Daren Presbitero wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Group Studiers, Anyone know how to tell the difference between a 1720 and 1721 router? Will it show up on a show ver that it is a 1721 vice 1720? Is there something different as far as visually? Thanks in advance, Daren Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55121t=54972 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX 515E Mem [7:55122]
The default memory in the 515E is 32Mb, supposedly upgradable to 64Mb. Looking in the Hardware Installation Guide it says you cannot install a 64 Mb DIMM in the PIX 515 due to height restraints. But I've seen a couple posts on this list stating a PIX 515E with 128Mb Is it possible to use Simpletech's (# SCS-PIX5/64) 64Mb chip in the PIX 515E? Thanx, mkj ~~~ Michael Jablonski ABN AMRO Asset Management Holdings, Inc. 161 North Clark St. 9th Flr Chicago, IL 60601-2468 PH: 312.884.2996 FAX: 312.278.5550 ~~~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55122t=55122 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cables [7:55096]
Would this work for a T1 WIC to T1 WIC virtual circuit? Or could you use a standard x-over? -Original Message- From: Ellis, Andrew [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:51 AM To: [EMAIL PROTECTED] Subject: RE: Cables [7:55096] also look at: http://www.gcom.com/home/support/t1crossover.html ALE -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 AM To: [EMAIL PROTECTED] Subject: Re: Cables [7:55096] In my mind a rollover is a mirror image, i.e. 1-8, 2-7, 3-6, etc... whereas a crossover crosses over specific wires for a specific purpose, T1 crossover is not the same as a 56K xover is not the same as an ethernet crossover etc... Dave maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55123t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cables [7:55096]
a standard T1 xover would work just fine, 1-4, 2-5. Dave [EMAIL PROTECTED] wrote: Would this work for a T1 WIC to T1 WIC virtual circuit? Or could you use a standard x-over? -Original Message- From: Ellis, Andrew [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:51 AM To: [EMAIL PROTECTED] Subject: RE: Cables [7:55096] also look at: http://www.gcom.com/home/support/t1crossover.html ALE -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 AM To: [EMAIL PROTECTED] Subject: Re: Cables [7:55096] In my mind a rollover is a mirror image, i.e. 1-8, 2-7, 3-6, etc... whereas a crossover crosses over specific wires for a specific purpose, T1 crossover is not the same as a 56K xover is not the same as an ethernet crossover etc... Dave maine dude wrote: Hi, Can someone please tell me if there is any difference between a cross-over cable and a roll-over cable? Thanks, - Get a bigger mailbox -- choose a size that fits your needs. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55124t=55096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I need any 5.x firmware for a Catalyst 1900 [7:55125]
Please!!! Thanks. -Colin Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55125t=55125 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX 515E Mem [7:55122]
any PC100 memory chip will work on Cisco 515E [EMAIL PROTECTED] wrote:The default memory in the 515E is 32Mb, supposedly upgradable to 64Mb. Looking in the Hardware Installation Guide it says you cannot install a 64 Mb DIMM in the PIX 515 due to height restraints. But I've seen a couple posts on this list stating a PIX 515E with 128Mb Is it possible to use Simpletech's (# SCS-PIX5/64) 64Mb chip in the PIX 515E? Thanx, mkj ~~~ Michael Jablonski ABN AMRO Asset Management Holdings, Inc. 161 North Clark St. 9th Flr Chicago, IL 60601-2468 PH: 312.884.2996 FAX: 312.278.5550 ~~~ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, more faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55127t=55122 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: I need any 5.x firmware for a Catalyst 1900 [7:55125]
You need to go to this URL, and click on the Catalyst 1900 original link: http://www.cisco.com/kobayashi/sw-center/lan/cat1900.shtml You will need a CCO login to get to it. If you don't have a login, you can only get the version 9 software for the newer models. Thanks, Shawn Colin Weaver wrote: Please!!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55126t=55125 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX 515E Mem [7:55122]
Would it max out at 128 (2 X 64MB) or could you go with 256? -Original Message- From: mike greenberg [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 4:56 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: PIX 515E Mem [7:55122] any PC100 memory chip will work on Cisco 515E [EMAIL PROTECTED] wrote: The default memory in the 515E is 32Mb, supposedly upgradable to 64Mb. Looking in the Hardware Installation Guide it says you cannot install a 64 Mb DIMM in the PIX 515 due to height restraints. But I've seen a couple posts on this list stating a PIX 515E with 128Mb Is it possible to use Simpletech's (# SCS-PIX5/64) 64Mb chip in the PIX 515E? Thanx, mkj ~~~ Michael Jablonski ABN AMRO Asset Management Holdings, Inc. 161 North Clark St. 9th Flr Chicago, IL 60601-2468 PH: 312.884.2996 FAX: 312.278.5550 ~~~ _ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, more faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55128t=55122 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Off topic - Cisco's jazzy web site [7:54966]
I think the idea is that when you look for a 2600 for example, everything is there together (the sales gumpf, the tech specs, etc etc) Not sure whether that's a good idea or not. As an engineer you're fairly regularly going to certain areas, and it's handy to have the info for all the routers there, rather than going to a different place for each router (if that's the way it's going). Gaz In article , [EMAIL PROTECTED] says... I'm seeing more integration between the marketing materials and the technical materials. As expected, the marketing seems to be prominent. I'll keep an open mind as to its improved/not improved logic. -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Ugh...I just took a look. Am I the only one who thinks this is horrid? Perhaps I'm too used to the old layout but this seems to be much more difficult to follow. Oh well, in a few months I'm sure it will be old-hat. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55129t=54966 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Tech Tips [7:55015]
What about Software Bug Toolkit! Where do you reckon that belongs? Ahhh - Troubleshooting Tools! Nope! Configuration Tools. Wot? In article , [EMAIL PROTECTED] says... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Persio Pucci Sent: Monday, October 07, 2002 1:38 PM To: [EMAIL PROTECTED] Subject: Tech Tips [7:55015] Hey folks, where did the Tech Tips go that I cannot find it anywhere in the new Cisco site? Did anybody find it already? :( Regards, Persio Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55130t=55015 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Enable Secret of AS5300 [7:55086]
What I will say might sound silly but here it is You just pasted the enable secret line in encrypted form, did you got it from a backup file for the configuration or you can login to the router using sort of a script where the password is saved but you can't retreive it. If it is the case where you can login intp the priviliged mode then why don't you change the password instead of trying recovering it . Anyway, your enable password is: cisco1 Try it or passwords similar to it maybe it will work for you On Tuesday 08 October 2002 12:56 pm, you wrote: Hi group I lost the enable secret password of my Cisco AS5300.I have theconfiguration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp.enable password 7 110A1016141D5A Any idea to decrypt this password. Thanks in advance _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Nondisclosure violations to [EMAIL PROTECTED] _ Chat with friends online, try MSN Messenger: http://messenger.msn.com misconduct and Nondisclosure violations to [EMAIL PROTECTED] Join the worlds largest e-mail service with MSN Hotmail. Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55131t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
good alt. to a catalyst 3550 [7:55132]
Hi, does anyone know what would be a good (and cheap) alternate for a 3550 switch. Please let me know. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55132t=55132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: good alt. to a catalyst 3550 [7:55132]
I would also appreciate if you could specify any places to get it from that are good. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55133t=55132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Tech Tips [7:55015]
For this reason, among many other, let me reiterate how much I dislike the new site. It's painful to navigate. As an example, when I used to want to check for a new IOS release I'd go to the Software Center, select the major release number and then look at what images were available. IIRC, this took four clicks. To get to the same screen now takes _eight_ clicks. I'm sure there are shorter paths to get where I was going but that's ridiculous! John Gaz 10/8/02 4:13:15 PM What about Software Bug Toolkit! Where do you reckon that belongs? Ahhh - Troubleshooting Tools! Nope! Configuration Tools. Wot? In article , [EMAIL PROTECTED] says... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Persio Pucci Sent: Monday, October 07, 2002 1:38 PM To: [EMAIL PROTECTED] Subject: Tech Tips [7:55015] Hey folks, where did the Tech Tips go that I cannot find it anywhere in the new Cisco site? Did anybody find it already? :( Regards, Persio Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55134t=55015 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: protocol monitoring software [7:55110]
sam sneed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. http://members.optushome.com.au/emikulic/net/darkstat/ http://www.tcptrace.org/ http://www.tcpdump.org/related.html http://packetstorm.decepticons.org/sniffers/ http://pastmon.sourceforge.net/ http://dingetje.homeip.net/iptotal/ Or commercial: http://www.niksun.com/ http://www.unispeed.com/ -dre Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55135t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: good alt. to a catalyst 3550 [7:55132]
Vic Dmon wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, does anyone know what would be a good (and cheap) alternate for a 3550 switch. Please let me know. Thanks CL: good for what? the 2950 series is L2 only and advertises that it does not have all of the QoS funtionality of the 3550. You'd have to check the documentation for both to figure out what those shortcomings may be. CL: For an L3 Cisco switch, the 3550 with the EMI image is about the lowest price device you can get. CL: check out http://www.nextag.com/ for price comparisons. also, if you visit a certain auction site, you can get lucky and get a good price sometimes. CL: The rest of Cisco's low end line - the 19xx, the 29xx, and the 35xx are pretty much history. If you are asking in terms of CCIE lab preparation, you are probably better off investing in a real 3550, or making friends with someone who has one, or renting rack time from an establishment that has them available. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55137t=55132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OT: CSCO stock [7:54957]
Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Yes, we'll need strong business skills and an understanding of the business applications that ride on the networks and actually make some money. Or maybe better muscles. I saw on the news that the Pacific Maritime Association offered the longshoremen a raise for the highest paying job to $137,000. The longshoremen turned it down. Unbelievable. CL: yeah, but it's outdoor work, and involves heavy lifting. ;- Hey, I'm generally a bleeding liberal, but this port closure thing p!sses me off. Priscilla nrf wrote: Sorry to be so pessimistic. NRF - got anything to add? Oh, I got lots to add. But let me try to keep it short by couching things in the following bullet points: *If you want money, somebody has to be ultimately paying. Money in, money out. Cisco is not a mint. No vendor is a mint. Cisco can only earn money sustainably if their customers are making money. And not just making money, but making money by using Cisco gear. You can only get money out if there is money coming in. Is that really happening? Let me explain. Let's look at the Internet. Many studies have shown a boom in Internet usage. A boom in traffic. A boom in users. A boom in time spent on the Internet. In all categories there is a boom, except for the one category that matters - a boom in profits. How many dotcoms actually make money? Few, very few. How many service-providers actually make profit from providing Internet access? Again, few, very few. If you tally the aggregate of all the profit and losses derived from Internet operations, you will see that the Internet has been nothing but a financial debacle of the first order. A business model where you, as a vendor, are making record profits while many of your customers are unprofitable is a business model that is unsustainable. True, Cisco is not just all about the Internet. So let's look at Cisco's bread-and-butter - the enterprise customer. Enterprises will continue to invest in their network only to the degree that it is profitable to do so. Has Cisco, or any other networking vendor, been able to demonstrate a solid ROI from upgrading the network?In many cases, no. Companies don't just build out networks 'for fun', they do so because there is a clear business reason to do so. What are these reasons? Now don't get me wrong, I'm not saying that there are no good reasons to do a network buildout. Indeed there are often many good reasons. But my point is that we need engineers who are not only technically strong, but can also articulate a strong business case as to why money should be spent. In short, we engineers need to know more about the business and financial side of things. *How many people really care about the network? By that, I mean how many regular (non-technical) people really care about a network at all? Are they going to be dazzled with mentions of BGP and VoIP and all that crap? Hardly. Regular people care about the services that a network can provide. It is the services that people are willing to pay for, not the network itself. But that begs the question - are there really all these jazzy services out there that regular people are willing to pay for? Before you answer, you may wish to consider the following snippet from the Hart-Winston study: The bottom line is that among people who are most likely to subscribe to high-speed Internet access, the obstacles are price and lack of appeal, said Hart, CEO of Hart Research. Forty-eight percent have no interest regardless of price and another 21 percent are willing to pay at most $20 per month. If you cannot win over the people who are currently using the Internet, consumer acceptance of high-speed access will be slow and limited...Findings about consumer interest in subscribing to high-speed service also apply to those who use it at work, the poll found, indicating that even those exposed to the service find little reason to subscribe at home http://www.comptel.org/press/nov29_2001_voices.html Then of course there was that incident in Oregon where a whole town was offered free broadband for a year, and only half the households signed up (can't find the article unfortunately, but you may wish to talk to Steven Ridder if you want to see it). The point is, at this time, very few regular people actually care about the Internet because there are no truly compelling services out there, and especially not much that people are willing to pay serious money for. * Cisco isn't going anywhere. All the nasty invective aside, the fact is that Cisco holds more of a premier position in the industry than perhaps at any other time. They got billions of dollars
RE: PIX 515E Mem [7:55122]
I am not 100% certain but I am pretty sure that the motherboard does not support 256MB of RAM. You can go with 1 128MB chip or 2 64MB chip [EMAIL PROTECTED] wrote:Would it max out at 128 (2 X 64MB) or could you go with 256?-Original Message- From: mike greenberg [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 4:56 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: PIX 515E Mem [7:55122] any PC100 memory chip will work on Cisco 515E [EMAIL PROTECTED] wrote: The default memory in the 515E is 32Mb, supposedly upgradable to 64Mb. Looking in the Hardware Installation Guide it says you cannot install a 64 Mb DIMM in the PIX 515 due to height restraints. But I've seen a couple posts on this list stating a PIX 515E with 128Mb Is it possible to use Simpletech's (# SCS-PIX5/64) 64Mb chip in the PIX 515E? Thanx, mkj ~~~ Michael Jablonski ABN AMRO Asset Management Holdings, Inc. 161 North Clark St. 9th Flr Chicago, IL 60601-2468 PH: 312.884.2996 FAX: 312.278.5550 ~~~ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, more faith.yahoo.com - Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, more faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55138t=55122 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IOS Port range command [7:55139]
I remember reading about this here a while back but couldn't find it in my archives. I really like CatOS for its ability to change a group of ports all at once. The feature is now available in IOS (well, it's probably been there for a while). Who knows... it may save a little time in the lab. I did this on a 3550-24: Switch(config)#int range f0/1 -24 Switch(config-if-range)#no shut Switch(config-if-range)# 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/19, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/22, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down Switch(config-if-range)# Switch(config-if-range)# Switch(config-if-range)#exit Switch(config)#exit Switch# I found this information at: http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a93ed.shtml Way too much fun. Ken Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55139t=55139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Tech Tips [7:55015]
I just now wanted to check something regarding the CCIE lab. Guess what I can't find on the new site? The what's new section. It looks like we will have to dig high and low to find the announcements - what kind of cra* is that? -- www.chuckslongroad.info like my web site? take the survey! John Neiberger wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... For this reason, among many other, let me reiterate how much I dislike the new site. It's painful to navigate. As an example, when I used to want to check for a new IOS release I'd go to the Software Center, select the major release number and then look at what images were available. IIRC, this took four clicks. To get to the same screen now takes _eight_ clicks. I'm sure there are shorter paths to get where I was going but that's ridiculous! John Gaz 10/8/02 4:13:15 PM What about Software Bug Toolkit! Where do you reckon that belongs? Ahhh - Troubleshooting Tools! Nope! Configuration Tools. Wot? In article , [EMAIL PROTECTED] says... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Persio Pucci Sent: Monday, October 07, 2002 1:38 PM To: [EMAIL PROTECTED] Subject: Tech Tips [7:55015] Hey folks, where did the Tech Tips go that I cannot find it anywhere in the new Cisco site? Did anybody find it already? :( Regards, Persio Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55140t=55015 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Enable Secret of AS5300 [7:55086]
I lost the enable secret password of my Cisco AS5300.I have the configuration showing. enable secret 5 $1$6YRM$nzNXQuv4h24C3AlB8N3rp. enable password 7 110A1016141D5A One more point, since you have an 'enable secret' configured, the 'enable password' serves no purpose. When you type 'enable' to go to exec mode, it will only work with the 'enable secret' at the password prompt. If a secret is configured, the enable password is never utilized. You can safely remove the 'enable password'. Good Luck! fgm Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55141t=55086 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IOS Port range command [7:55139]
I did this on a 3550-24: Switch(config)#int range f0/1 -24 Switch(config-if-range)#no shut Switch(config-if-range)# 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: [nsp] Bonding of Multiple ISDN B-Channels [7:55143]
Kerpal, Here is a configuration that I use with a 4 port BRI router on a Cisco 3640. 1) Create a dialer interface like the one below. This is where you will actually put all the parameters for the BRI interfaces. indicates where you should fill in the information interface Dialer1 description ip address encapsulation ppp dialer in-band dialer map ip name broadcast dialer hold-queue 10 dialer load-threshold 10 outbound dialer-group 1 ppp authentication chap The dialer load-threshold command tells the router that when it reaches 10/255 (3% traffic load if my math is correct) it will bring up the other channel and the other BRI interfaces if configured on them. This is really aggressive, but you can configure it to whatever you like. 2) Now map the dial interface across your BRI interfaces interface BRI1/0 dialer rotary-group 1 interface BRI1/1 dialer rotary-group 1 interface BRI1/3 dialer rotary-group 1 interface BRI1/3 dialer rotary-group 1 Hope this helps. Thanks, Thomas Renzy IST Global Network Services VERITAS Software Office: +650-527-4734 Mobile: +650-996-7048 Fax: +650-527-2034 Some people drink from the fountain of knowledge, others just gargle. - Author Robert Anthony -Original Message- From: Kerpal.Abdar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 6:08 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: [nsp] Bonding of Multiple ISDN B-Channels Hi. Could anyone tell me what router / interface to use and what I would need to configure in order to bond up to 4 ISDN B-channels based on bandwidth needs? Sample configuration? Thanks Kerpal ___ cisco-nsp mailing list real_name)[EMAIL PROTECTED] http://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55143t=55143 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Frame LMI [7:55120]
I have to admit that that is one nice thing about Wellfleet/Bay/Nortel routers. They built in pcap (Packet Capture) years ago, and it's actually exportable/convertible to a sniffer format for analysis. Alas, not on a cisco... But I'm sure someone here will provide a more useful answer than the one that I haven't provided. Good Luck! fgm Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55144t=55120 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
protocol monitoring software [7:55110]
Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55145t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Tech Tips [7:55015]
On Feb 28, 8:57pm, Chuck's Long Road wrote: } } I just now wanted to check something regarding the CCIE lab. Guess what I } can't find on the new site? The what's new section. - http://www.cisco.com/go/ccie/ - in the blue buttons on the left, it is the third one down } It looks like we will have to dig high and low to find the announcements - } what kind of cra* is that? I tend to make a lot of use of the go shortcuts. That way, I don't have to remember long URLs and I don't have to worry about the organisation of the site (I rarely see the homepage). }-- End of excerpt from Chuck's Long Road Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55146t=55015 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: protocol monitoring software [7:55110]
Sam, OVER HERE! LOOK HERE! PICK ME! :) Seriously though, take a look at NetFlow. Nice flow based accounting exported at flow conclusion by the router to a 'collector'. It records, on a per-flow basis, src AS, src IP, src port, dst AS, dst IP, dst port, pkts in flow, B in flow, start time, stop time, etc, etc, etc. I'm sure you get the idea; this is pretty powerful stuff! You can have your collector aggregate all the flow exports over a given time period, or you can have your router do it before it sends the info to the collector. Cisco sells their own commercial products to collect and analyze and they also partner with 3rd party commercial vendors to provide you with collectors and analyzers. The best stuff though, IMHO, are the tools from the open source community. Cisco acknowledges these tools and even lists where you can get them on their website, however, they are obviously not supported. Start here: http://www.cisco.com/go/netflow http://net.doit.wisc.edu/~plonka/FlowScan/ http://www.splintered.net/sw/flow-tools/ http://www.columbia.edu/acis/networks/advanced/CUFlow/ There are good examples of implementations here: http://wwwstats.net.wisc.edu/ http://www.canet3.net/stats/map.html And of course, although they have no relation to NetFlow, no disscussion of network monitoring tools is complete without Tobi's Tools: http://www.smokeping.org http://www.mrtg.org http://www.rrdtool.org HTH, Greg Reaume Cliff Stewart wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55147t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: good alt. to a catalyst 3550 [7:55132]
I don't know of any alternative for the 3550. While you can purchase a less expensive switch to practice your IOS-based commands (such as a 2912XL, 2924XL, or 3524XL, for example), you will be losing a lot of features that will most likely show up on the CCIE Lab exam, such as advanced Quality of Service (QoS) and Layer 3 functionality. You're best off biting the bullet and purchasing a 3550 or renting 3550 rack time. Shawn K. -Original Message- From: Vic Dmon [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 6:19 PM To: [EMAIL PROTECTED] Subject: good alt. to a catalyst 3550 [7:55132] Hi, does anyone know what would be a good (and cheap) alternate for a 3550 switch. Please let me know. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55148t=55132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: protocol monitoring software [7:55110]
Is there something similar to this NetFlow for the PIX?? I could use a tool that monitors each flow of traffic, perhaps even with the ability to specify a specific host to monitor its flows across the IPSec tunnel of two PIXen. Any suggestions appreciated. Mark -Original Message- From: Greg Reaume [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 PM To: [EMAIL PROTECTED] Subject: Re: protocol monitoring software [7:55110] Sam, OVER HERE! LOOK HERE! PICK ME! :) Seriously though, take a look at NetFlow. Nice flow based accounting exported at flow conclusion by the router to a 'collector'. It records, on a per-flow basis, src AS, src IP, src port, dst AS, dst IP, dst port, pkts in flow, B in flow, start time, stop time, etc, etc, etc. I'm sure you get the idea; this is pretty powerful stuff! You can have your collector aggregate all the flow exports over a given time period, or you can have your router do it before it sends the info to the collector. Cisco sells their own commercial products to collect and analyze and they also partner with 3rd party commercial vendors to provide you with collectors and analyzers. The best stuff though, IMHO, are the tools from the open source community. Cisco acknowledges these tools and even lists where you can get them on their website, however, they are obviously not supported. Start here: http://www.cisco.com/go/netflow http://net.doit.wisc.edu/~plonka/FlowScan/ http://www.splintered.net/sw/flow-tools/ http://www.columbia.edu/acis/networks/advanced/CUFlow/ There are good examples of implementations here: http://wwwstats.net.wisc.edu/ http://www.canet3.net/stats/map.html And of course, although they have no relation to NetFlow, no disscussion of network monitoring tools is complete without Tobi's Tools: http://www.smokeping.org http://www.mrtg.org http://www.rrdtool.org HTH, Greg Reaume Cliff Stewart wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55149t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Migration Plan (6509) [7:55064]
Our parent company had the idea of letting a TelCo do the same for us. The TelCo was/is contracted to set up a gateway between the old network and the new network. Lucky for us we're smarter than they are (at least we think we are...) and are having things our way. :-) It's difficult to try keeping a hands-off approach to letting a vendor install a major piece of equipment in the core of MY network. Maybe you know how it is... watching an engineer (CCNP with some experience) who is supposed to know what he's doing but brings down the network instead. Add a CCIE with a few years experience to the mix, three more tries with two of them resulting in network outages. The suggested configuration for our first 6500 (a 6513 with dual Sup2/MSFC2/PFC2) was to run in HSRP between the two MSFCs. (For those who don't know, an MSFC - Multiservice Switch Feature Card or something like that, is a routing module on the switch supervisor). We are running IP, IPX and AppleTalk. What they didn't tell us was we had to keep the configurations sync'ed between the two MSFCs otherwise there would be problems. Config Sync doesn't support AppleTalk. Guess what... we had problems. We're now running SRM. I guess I should get to the point here. My experience says forklift upgrades are bad. Way too much room for things to go bad. Considering the problems introducing a single new core box, I'd take it slow. make sure everything runs as planned while you upgrade. Make sure Spamming-Tree (did I say that??) is working properly, VTP is communicating and the hardware has burned in. That brings up another thing: after the first few weeks, one of the lights on the switch fabric module stopped showing green (looked burned out). While tempted to say it's just a light, you have no idea what the root problem causing the light not to function is. We had the vendor replace the card. It seems our vendor keeps shooting itself in the foot. Their engineers keep doing things that prevents them from earning any respect from us. On a positive note, I know one engineer with that company who I do respect. Too bad they keep him in design. :-) Ken Chuck's Long Road 10/07/02 09:45PM interesting. The following may or may not be feasible, depending upon space in closets, and cost of implementation. It is something my employer is supposed to be doing for the various branch offices of a major customer we have during a major network forklift upgrade. It has tended not to happen this way for a lot of reasons, political and practical. 1) Place all new switches into the various closets. Connect them up 2) set up a gateway ( single link ) between the new core switch(s) and the old core switch(s) 3) test connectivity by taking a laptop with as many user applications as practical, and go from closet to closet testing connectivity to the various servers, services, etc. 4) assuming point three results in connectivity everywhere, do a closet by closet migration of users from the old switches to the new switches. 5) migrate all devices ( servers, internet, etc ) onto the new core switches. 6) assuming all remains well, unplug the old stuff and if Cisco is not offering you a generous trade in, sell it on one of the auction sites. Like I said, sometimes time, space, and cost does not permit this. Chuck -- www.chuckslongroad.info like my web site? take the survey! Azhar Teza wrote in message [snip] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55150t=55064 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Changes in CCNP Courses?? [7:55085]
The only thing I could think of that would change would be to possibly add some simulations to these particular exams. Also, with the addition of the 3550 switch in the lab, the SWTCH exam may soon be asking questions regarding some of the features of this switch. However, who the hell knows anymore what Cisco is going to do. And who the hell knows when! :-) But I wouldn't expect any changes for a while since Cisco just updated the SWTCH and SUPRT exams to the 6xx series not to long ago. That's just my guess. Shawn K. -Original Message- From: ccnp ccnp2002 [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 4:56 AM To: [EMAIL PROTECTED] Subject: Changes in CCNP Courses?? [7:55085] Hi All, Below is a statement made by one of the members: ..One caveat though, all the exams are changing in the near future, with Switching and CIT undergoing the greatest change, so what I said above may not be valid in the future... Do you have any idea what the changes are to be and when... so that I can hurry up my CCNP studies? Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55151t=55085 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: protocol monitoring software [7:55110]
Mark, No, unfortunately NetFlow isn't supported on the PIX, like many other things. Really though, you don't want to run it there. Because NetFlow exports the level of detail that it does, you can gather all your stats for your entire network just by running it on all your edge routers. All you need to make sure of is that a flow originates behind a NetFlow enabled router, and that it is destined for a prefix that either resides on a subnet of another NetFlow enabled router in your AS, or a prefix which is beyond your AS (in which case you catch that too because you're running NetFlow at your ASBR(s)). You don't want to run this in your core or anywhere else there are not hosts. If you want to single out a /32 (or a particular port on a host or group of hosts) and view the activity as perceived by NetFlow, you can use the 'flow-tools'. The flow-tools is a package I listed a link to below and it includes a number of handy little tools. 'flow-filter' will allow you to filter on any attribute in the flow record and output the info to stdio. HTH, Greg Reaume Mark W. Odette II wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is there something similar to this NetFlow for the PIX?? I could use a tool that monitors each flow of traffic, perhaps even with the ability to specify a specific host to monitor its flows across the IPSec tunnel of two PIXen. Any suggestions appreciated. Mark -Original Message- From: Greg Reaume [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 PM To: [EMAIL PROTECTED] Subject: Re: protocol monitoring software [7:55110] Sam, OVER HERE! LOOK HERE! PICK ME! :) Seriously though, take a look at NetFlow. Nice flow based accounting exported at flow conclusion by the router to a 'collector'. It records, on a per-flow basis, src AS, src IP, src port, dst AS, dst IP, dst port, pkts in flow, B in flow, start time, stop time, etc, etc, etc. I'm sure you get the idea; this is pretty powerful stuff! You can have your collector aggregate all the flow exports over a given time period, or you can have your router do it before it sends the info to the collector. Cisco sells their own commercial products to collect and analyze and they also partner with 3rd party commercial vendors to provide you with collectors and analyzers. The best stuff though, IMHO, are the tools from the open source community. Cisco acknowledges these tools and even lists where you can get them on their website, however, they are obviously not supported. Start here: http://www.cisco.com/go/netflow http://net.doit.wisc.edu/~plonka/FlowScan/ http://www.splintered.net/sw/flow-tools/ http://www.columbia.edu/acis/networks/advanced/CUFlow/ There are good examples of implementations here: http://wwwstats.net.wisc.edu/ http://www.canet3.net/stats/map.html And of course, although they have no relation to NetFlow, no disscussion of network monitoring tools is complete without Tobi's Tools: http://www.smokeping.org http://www.mrtg.org http://www.rrdtool.org HTH, Greg Reaume Cliff Stewart wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55152t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: protocol monitoring software [7:55110]
Here's the 'man' page on flow-tools. It gives a good overview of NetFlow, the different versions and their assoc export fields, and what 'goodies' flow-tools includes. http://www.splintered.net/sw/flow-tools/docs/flow-tools.html Read this. Greg Reaume Greg Reaume wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Mark, No, unfortunately NetFlow isn't supported on the PIX, like many other things. Really though, you don't want to run it there. Because NetFlow exports the level of detail that it does, you can gather all your stats for your entire network just by running it on all your edge routers. All you need to make sure of is that a flow originates behind a NetFlow enabled router, and that it is destined for a prefix that either resides on a subnet of another NetFlow enabled router in your AS, or a prefix which is beyond your AS (in which case you catch that too because you're running NetFlow at your ASBR(s)). You don't want to run this in your core or anywhere else there are not hosts. If you want to single out a /32 (or a particular port on a host or group of hosts) and view the activity as perceived by NetFlow, you can use the 'flow-tools'. The flow-tools is a package I listed a link to below and it includes a number of handy little tools. 'flow-filter' will allow you to filter on any attribute in the flow record and output the info to stdio. HTH, Greg Reaume Mark W. Odette II wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is there something similar to this NetFlow for the PIX?? I could use a tool that monitors each flow of traffic, perhaps even with the ability to specify a specific host to monitor its flows across the IPSec tunnel of two PIXen. Any suggestions appreciated. Mark -Original Message- From: Greg Reaume [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 PM To: [EMAIL PROTECTED] Subject: Re: protocol monitoring software [7:55110] Sam, OVER HERE! LOOK HERE! PICK ME! :) Seriously though, take a look at NetFlow. Nice flow based accounting exported at flow conclusion by the router to a 'collector'. It records, on a per-flow basis, src AS, src IP, src port, dst AS, dst IP, dst port, pkts in flow, B in flow, start time, stop time, etc, etc, etc. I'm sure you get the idea; this is pretty powerful stuff! You can have your collector aggregate all the flow exports over a given time period, or you can have your router do it before it sends the info to the collector. Cisco sells their own commercial products to collect and analyze and they also partner with 3rd party commercial vendors to provide you with collectors and analyzers. The best stuff though, IMHO, are the tools from the open source community. Cisco acknowledges these tools and even lists where you can get them on their website, however, they are obviously not supported. Start here: http://www.cisco.com/go/netflow http://net.doit.wisc.edu/~plonka/FlowScan/ http://www.splintered.net/sw/flow-tools/ http://www.columbia.edu/acis/networks/advanced/CUFlow/ There are good examples of implementations here: http://wwwstats.net.wisc.edu/ http://www.canet3.net/stats/map.html And of course, although they have no relation to NetFlow, no disscussion of network monitoring tools is complete without Tobi's Tools: http://www.smokeping.org http://www.mrtg.org http://www.rrdtool.org HTH, Greg Reaume Cliff Stewart wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55153t=55110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: protocol monitoring software [7:55110]
I sent this and then it showed up in my newsreader as removed from server. ? My apologies if I double post. Greg Greg Reaume wrote in message news:... Here's the 'man' page on flow-tools. It gives a good overview of NetFlow, the different versions and their assoc export fields, and what 'goodies' flow-tools includes. http://www.splintered.net/sw/flow-tools/docs/flow-tools.html Read this. Greg Reaume Greg Reaume wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Mark, No, unfortunately NetFlow isn't supported on the PIX, like many other things. Really though, you don't want to run it there. Because NetFlow exports the level of detail that it does, you can gather all your stats for your entire network just by running it on all your edge routers. All you need to make sure of is that a flow originates behind a NetFlow enabled router, and that it is destined for a prefix that either resides on a subnet of another NetFlow enabled router in your AS, or a prefix which is beyond your AS (in which case you catch that too because you're running NetFlow at your ASBR(s)). You don't want to run this in your core or anywhere else there are not hosts. If you want to single out a /32 (or a particular port on a host or group of hosts) and view the activity as perceived by NetFlow, you can use the 'flow-tools'. The flow-tools is a package I listed a link to below and it includes a number of handy little tools. 'flow-filter' will allow you to filter on any attribute in the flow record and output the info to stdio. HTH, Greg Reaume Mark W. Odette II wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is there something similar to this NetFlow for the PIX?? I could use a tool that monitors each flow of traffic, perhaps even with the ability to specify a specific host to monitor its flows across the IPSec tunnel of two PIXen. Any suggestions appreciated. Mark -Original Message- From: Greg Reaume [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 08, 2002 11:50 PM To: [EMAIL PROTECTED] Subject: Re: protocol monitoring software [7:55110] Sam, OVER HERE! LOOK HERE! PICK ME! :) Seriously though, take a look at NetFlow. Nice flow based accounting exported at flow conclusion by the router to a 'collector'. It records, on a per-flow basis, src AS, src IP, src port, dst AS, dst IP, dst port, pkts in flow, B in flow, start time, stop time, etc, etc, etc. I'm sure you get the idea; this is pretty powerful stuff! You can have your collector aggregate all the flow exports over a given time period, or you can have your router do it before it sends the info to the collector. Cisco sells their own commercial products to collect and analyze and they also partner with 3rd party commercial vendors to provide you with collectors and analyzers. The best stuff though, IMHO, are the tools from the open source community. Cisco acknowledges these tools and even lists where you can get them on their website, however, they are obviously not supported. Start here: http://www.cisco.com/go/netflow http://net.doit.wisc.edu/~plonka/FlowScan/ http://www.splintered.net/sw/flow-tools/ http://www.columbia.edu/acis/networks/advanced/CUFlow/ There are good examples of implementations here: http://wwwstats.net.wisc.edu/ http://www.canet3.net/stats/map.html And of course, although they have no relation to NetFlow, no disscussion of network monitoring tools is complete without Tobi's Tools: http://www.smokeping.org http://www.mrtg.org http://www.rrdtool.org HTH, Greg Reaume Cliff Stewart wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you. -Cliff -Original Message- From: sam sneed To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] Hello, I am looking for software that will monitor what kind of traffic is going through my network and report it.I am only concerned with what is going through my firewall so I will place the monitoring station on a hub with the firewall or use SPAN port. Here are requirements: Doesn't use netflow to collect data, want to use libpcap to capture data. Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP etc. Do not want to use NTOP, too much of a pain in the ass to get it to work longer than 20 minutes without a seg fault. Would like the output in graphical form preferbably embeded in a web page. If anyone has come across this please let me know. I'm contemplating writing my own software but would rather not. Thanks. ___ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55154t=55110 -- FAQ, list archives, and subscription info:
Re: Cisco Certification Digest V2 #2285 (Out of the Office) [7:55155]
I will on vacation starting October 5 and will be returning to the office on October 15, 2002. Thanks, Danny Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55155t=55155 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP dumps????????????? [7:55156]
Could someone please tell me where to avail latest CCNP dumps especially for BSCI (routing) and BSCSN (switching)? Please reply fast Thanx in advance, Raj Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55156t=55156 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
