Boson practice tests [7:31209]
Hello colleagues, I am preparing for the written CCIE (Routing Switching) and I came across the Boson CCIE practice exams. The questions look ok; does anybody have comments on the quality of these practice exams ? Your comments are welcome. Thanks in advance. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31209t=31209 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Schedule job in CiscoWorks2000 [7:28852]
Hello colleagues, I am trying to schedule a job to get the enable and telnet passwords changed on all my switches and routers using the job scheduler in Resource Manager Essentials. I understand how to schedule the job, but the execution fails every time because the logon to the switches and routers fails. How is the job scheduler supposed to now how to logon to a system ? Where are the passwords stored ? Is there an option in CiscoWorks2000 where you can fill in the default passwords, similar to the default SNMP community strings ? Thanks for your help in advance. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=28852t=28852 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Trunking - VLANS - with NORTEL switch [7:27255]
Hamid, how far are you with the VLAN configuration on your BayStack 450 ? Use the 4VLAN Configuration Menu4 and the 4VLAN Port Configuration Menu4 to create VLANs and to add ports. Use the 4Multilink Trunk Configuration Menu4 to create trunks. The BayStack supports 802.1q trunking only, so you4ll have to use that on your Cisco router as well. Let me know if you need any more specific help. Below is a link to the BayStack 450 User Guide, which contains all the configuration information you need in detail: http://www25.nortelnetworks.com/library/tpubs/pdf/switches/bstack/450/02401A00.PDF Regards, Hans From: Hamid Reply-To: Hamid To: [EMAIL PROTECTED] Subject: Trunking - VLANS - with NORTEL switch [7:27255] Date: Sun, 25 Nov 2001 00:57:07 -0500 Hi group In my network I have a CISCO 3600 Router and a NORTEL Baystack 450 switch. its a manageble switch. I want to make VLAN and a make this switch VLANs oprate as routers's FastEthernet subinterfaces. I have do it with CATALYST 2924 switches. I made some VLANS and my router's FastEthernet port on switch use TRUNk protocol to route between VLANS. I want to use TRUNK protocol on Nortel switch but I dont know how. I asked the NORTEL support but they have not answer. please help me. _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27268t=27255 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cannot add dialer map statement [7:27078]
Hello colleagues, I am trying to add a dialer map statement to a dialer interface configuration. Even after removing the existing dialer map statement, upon entering the new one the system tells me that it cannot add the dialer map because there already exists a dynamic one. There is nothing showing in the running config, so I don4t know where the dynamic entry is stored. I have heard that this problem can occur with early IOS versions and that the workaround is to shut the BRI and then add the dialer map. This is not an option for me because I have to add the dialer map remotely. Does anybody have an idea ? Thanks in advance for your help. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27078t=27078 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VTY password on CatOS [7:23610]
Hello colleagues, does anybody know how to set the VTY password on a CatOS-based switch ? All I could find is the 'set password' command. Thanks for your help in advance. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23610t=23610 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Netsys Baseliner [7:23611]
Hello colleagues, I am trying to find information about the Netsys Baseliner, as far as I know it is an EoL product and not available anymore. I know that there once was an evaluation CD; does anybody know if that CD is still available, or can I get it from somebody ? Or is somebody willing to sell his or her version (NT) to me ? Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23611t=23611 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hex calculator allowed on BCMSN exam ? [7:20965]
Hi colleagues, I am about to take the BCMSN exam; I know that you are allowed to use a calculator on the exam, but does this calculator also allow you to convert decimals or binaries to hex ? I hope this question doesn't violate the non-disclosure agreements... Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20965t=20965 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Earl ASIC unsupported error message on cat5509 [7:18048]
Hello colleagues, I am trying to install a redundant SE III in a Cat5509 switch; the module is booting, but then the system is halted. Here is the output from the boot sequence: System Bootstrap, Version 5.1(2) Copyright (c) 1994-1999 by cisco Systems, Inc. Presto processor with 65536 Kbytes of main memory Autoboot executing command: boot bootflash:RTSYNC_cat5000-sup3_4-5-3.bin Loading Network Management Processor image Uncompressing file: ### ## System Power On Diagnostics NVRAM Size ...512 KB ID Prom Test ..Passed DPRAM Size 16KB DPRAM Data 0x55 Test ..Passed DPRAM Data 0xaa Test ..Passed DPRAM Address Test Passed Clearing DPRAM Done System DRAM Memory Size ...64MB DRAM Data 0x55 Test ...Passed DRAM Data 0xaa Test ...Passed DRAM Address Test Passed Clearing DRAM .Done EARLII Present EARLII RAM Test ...Passed EARL Serial Prom Test .Passed Level2 Cache ..Present Level2 Cache test..Passed Boot image: bootflash:RTSYNC_cat5000-sup3_4-5-3.bin Downloading epld sram device please wait ... Programming successful for Altera 10K50 SRAM EPLD SYSTEM_FATAL_ERROR: Banff subsystem failed SYSTEM_FATAL_ERROR: Unsupported Earl ASIC Halting the system. Does this mean that one of the ASICs on the card is malfunctioning ? Thanks for your help in advance. Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=18048t=18048 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Supervisor on Cat5509 not recognized [7:16588]
Hello colleagues, I have installed a redundant Supervisor III in my Cat5509. The problem is that the switch doesn4t see the module, it says that Module 2 is empty. The system status LED on the module is RED, which probably means that one of the self tests has failed. I am not sure how to find out what the problem is. Is there a way to determine why the module isn4t recognized ? Thanks in advance for your help. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16588t=16588 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MOTD on Cat5000/5500 [7:16137]
Hello colleagues, I have a question regarding the Message of the Day banner on Cat5000/5500 switches. It looks like I am limited to 255 characters; do you know if this can be changed so that I can put in a banner that exceeds 255 ? Thanks for your help in advance. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16137t=16137 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MOTD on Cat5000/5500 [7:16137]
Kevin, thanks for the info. The problem I am having is that, after typing in 5 or 6 lines, the switch itself ends the MOTD entry and says 'banner motd set', even without me typing the ending delimiter. Any idea what could cause that ? Thanks for your help in advance. Regards, Hans From: Kevin Welch Reply-To: Kevin Welch To: [EMAIL PROTECTED] Subject: Re: MOTD on Cat5000/5500 [7:16137] Date: Wed, 15 Aug 2001 06:48:51 -0400 Usage Guidelines The banner cannot contain more than 3,070 characters, including tabs. Tabs display as eight characters but take only one character of memory. That is from : http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_5/cmd_ref/ ses_sete.htm#xtocid85598 It would appear that this may vary depending on software image loaded on the device. Hope that helps.. -- Kevin Hello colleagues, I have a question regarding the Message of the Day banner on Cat5000/5500 switches. It looks like I am limited to 255 characters; do you know if this can be changed so that I can put in a banner that exceeds 255 ? Thanks for your help in advance. Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Nondisclosure violations to [EMAIL PROTECTED] http://www.siliconsamurai.net - This email was sent using SquirrelMail. Webmail for nuts! http://squirrelmail.org/ _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16158t=16137 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switch port failure on 3548 [7:15089]
Hello colleagues, I have a Cisco 3548 switch and I suspect that one of the switch ports is not working. All 48 ports have a CAT5 cable connection, and all ports are patched to the respective wall outlets, there are no active users yet, so all the ports are down/down. When I do a shut/no shut on all the ports, I can see in the log that all ports except one show that the port goes up and then down. To my best knowledge, the fact that the port goes up/down after a shut/no shut shows that the port is ok. The port that doesn't work goes down right away. My question is: does this mean that the actual physical switch port is defective, or that the CAT5 cable attached to the switch isn't working, or that something on the path from the switch port to the wall outlet isn't working ? Thanks for your help in advance ! Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15089t=15089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switch port failure on 3548 [7:15089]
Mike, thanks for your reply. The problem is that the switch is physically very far away; I just want know if a shut/no shut that is not followed by an up/down of the port inidcates that there is some sort of the problem with the switch port or the cabling. Thanks again in advance for your help. Regards, Hans From: Mike Mandulak To: Hans Stout , [EMAIL PROTECTED] Subject: Re: Switch port failure on 3548 [7:15089] Date: Tue, 07 Aug 2001 07:44:33 -0400 The only way I can think that it would be a cable problem is if there was a short in the wire somewhere. Unplug the CAT5 from the suspect port, do a shut/no shut do you get the same result? Better still plug a PC into the port, does it stay up/up? Then plug a PC in another port with an FTP server on it and do some file transfers, then check for errors. MikeM - Original Message - From: Hans Stout To: Sent: Tuesday, August 07, 2001 7:51 AM Subject: Switch port failure on 3548 [7:15089] Hello colleagues, I have a Cisco 3548 switch and I suspect that one of the switch ports is not working. All 48 ports have a CAT5 cable connection, and all ports are patched to the respective wall outlets, there are no active users yet, so all the ports are down/down. When I do a shut/no shut on all the ports, I can see in the log that all ports except one show that the port goes up and then down. To my best knowledge, the fact that the port goes up/down after a shut/no shut shows that the port is ok. The port that doesn't work goes down right away. My question is: does this mean that the actual physical switch port is defective, or that the CAT5 cable attached to the switch isn't working, or that something on the path from the switch port to the wall outlet isn't working ? Thanks for your help in advance ! Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15098t=15089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Switch port failure on 3548 [7:15089]
Hi Mike, thanks for your answer. Does that mean that if a shut/no shut doesn't result in an up/down, there definitely IS a problem with either the cabling OR the switch port ? For now that is all I need to know... Thanks for your help in advance. Regards, Hans From: Michael Reply-To: Michael To: [EMAIL PROTECTED] Subject: RE: Switch port failure on 3548 [7:15089] Date: Tue, 7 Aug 2001 09:27:36 -0400 Herr Stout, Another easy way of determining if the problem is with the port or the cable would be to plug both ends of the cat 5 cable(s) into a cable tester. The manner Mike proposes is legit but I would want to positively know that all pairs are 100%. Once you certify the cable as being good, then the port would probably be the problem. Hopefully it will be the cable...helluva lot cheaper! -Michael Vaughan Senior Network Engineer Predator-Hunter.com Inc. [EMAIL PROTECTED] -Original Message- From: Mike Mandulak Sent: Tue 8/7/2001 8:52 AM To: [EMAIL PROTECTED] Cc: Subject: Re: Switch port failure on 3548 [7:15089] The only way I can think that it would be a cable problem is if there was a short in the wire somewhere. Unplug the CAT5 from the suspect port, do a shut/no shut do you get the same result? Better still plug a PC into the port, does it stay up/up? Then plug a PC in another port with an FTP server on it and do some file transfers, then check for errors. MikeM - Original Message - From: Hans Stout To: Sent: Tuesday, August 07, 2001 7:51 AM Subject: Switch port failure on 3548 [7:15089] Hello colleagues, I have a Cisco 3548 switch and I suspect that one of the switch ports is not working. All 48 ports have a CAT5 cable connection, and all ports are patched to the respective wall outlets, there are no active users yet, so all the ports are down/down. When I do a shut/no shut on all the ports, I can see in the log that all ports except one show that the port goes up and then down. To my best knowledge, the fact that the port goes up/down after a shut/no shut shows that the port is ok. The port that doesn't work goes down right away. My question is: does this mean that the actual physical switch port is defective, or that the CAT5 cable attached to the switch isn't working, or that something on the path from the switch port to the wall outlet isn't working ? Thanks for your help in advance ! Regards, Hans _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15106t=15089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
7204 router requirements [7:4982]
Hello group, I need to order a 7204 router, but I am not sure about what the chassis is configured like. Does the chassis come with the NPE and the I/O controller by default, or do I have to buy them separately ? Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4982t=4982 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
100MB uplink to ISP [7:5026]
Hello group, I have a customer who wants to know which Cisco router (and appropriate port adapters) he needs to provide three 100MB uplinks to three different ISP4s. According to my own research, the 7206VXR with three OC-3 SONET-STM1 cards should do the job. Do you think this is the best solution ? I am not sure if the 7206 can handle that much bandwidth. Thanks for your input in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5026t=5026 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CBAC Question [7:4508]
Hello colleagues, I want to configure CBAC on a Cisco 2620 with the following interfaces (I have also attached a drawing of the network): FastEthernet0/0 ip address 192.168.19.2/24 FastEthernet0/0.2 ip address 10.33.128.2/19 FastEthernet0/0.3 ip address 192.168.14.2/24 FastEthernet0/0.4 ip address 193.67.42.194 Here are the conditions that I want to meet: 1) 192.168.19.0/24, 10.33.128.0/19, 192.168.14.0/24 should be denied access to 193.67.42.192/26 2) ICMP control traffic from 192.168.19.0/24, 10.33.128.0/19, 192.168.14.0/24 to 193.67.42.192/26 should be allowed 3) 193.67.42.192/26 must have unrestricted access to 192.168.19.0/24, 10.33.128.0/19, 192.168.14.0/24 4) Return traffic to 193.67.42.192/26 from all locations (also to 192.168.19.0/24, 10.33.128.0/19, 192.168.14.0/24) must be inspected by CBAC 5) Inbound traffic from Serial0 naar 192.168.19.0/24, 10.33.128.0/19, 192.168.14.0/24 must be unrestricted, inbound traffic from Serial0 to 193.67.42,192/26 must be inspected by CBAC Here is the config I have come up with: ! version 12.0 service timestamps debug datetime localtime show-timezone service timestamps log datetime localtime show-timezone service password-encryption ! ! logging buffered 1 debugging aaa new-model aaa authentication login vty-access group tacacs+ line enable aaa authentication login console group tacacs+ line enable aaa authentication enable default group tacacs+ enable aaa authorization commands 0 default group tacacs+ if-authenticated aaa authorization commands 1 default group tacacs+ if-authenticated aaa authorization commands 15 default group tacacs+ if-authenticated aaa accounting commands 15 default start-stop group tacacs+ enable secret 5 $1$R01/$R/DrSZ6e00rjUJ8NcSdLo1 enable password 7 1534041E107E2525 ! ! ! ! ! memory-size iomem 10 clock timezone cet 1 clock summer-time cet recurring last Sun Mar 3:00 last Sun Oct 3:00 no ip subnet-zero ip domain-name capgemini.nl ip name-server 10.32.64.32 ! ip audit notify log ip audit po max-events 100 ipx routing 0030.1955.1860 ! ip inspect name beheerfw cuseeme timeout 3600 ip inspect name beheerfw ftp timeout 3600 ip inspect name beheerfw rcmd timeout 3600 ip inspect name beheerfw realaudio timeout 3600 ip inspect name beheerfw smtp timeout 3600 ip inspect name beheerfw tftp timeout 30 ip inspect name beheerfw udp timeout 15 ip inspect name beheerfw tcp timeout 3600 ! ! ! ! ! interface FastEthernet0/0 ip address 192.168.19.2 255.255.255.0 no ip redirects no ip directed-broadcast no ip proxy-arp keepalive 3 speed 100 full-duplex ! interface FastEthernet0/0.2 encapsulation dot1Q 2 ip address 10.33.128.2 255.255.224.0 no ip directed-broadcast ipx encapsulation NOVELL-ETHER ! interface FastEthernet0/0.3 encapsulation dot1Q 502 ip address 192.168.14.2 255.255.255.0 no ip directed-broadcast ! interface FastEthernet0/0.4 encapsulation dot1Q 4 ip address 193.67.42.194 255.255.255.192 no ip directed-broadcast ip inspect beheerfw out ip access-group 102 in ipx encapsulation NOVELL-ETHER ! interface Serial0/0 bandwidth 2048 ip address 10.36.96.2 255.255.224.0 no ip redirects no ip directed-broadcast no ip proxy-arp no ip route-cache no ip mroute-cache no keepalive ! router rip network 10.0.0.0 network 192.168.14.0 network 192.168.19.0 ! ip classless ip route 0.0.0.0 0.0.0.0 10.36.96.1 no ip http server ! ! dialer-list 1 protocol ip permit access-list 102 permit icmp any any echo-reply log access-list 102 permit icmp any any time-exceeded log access-list 102 permit icmp any any packet-too-big log access-list 102 permit icmp any any traceroute access-list 102 permit icmp any any unreachable access-list 102 deny ip 192.168.19.0 0.0.0.255 193.67.42.192 0.0.0.63 log access-list 102 deny ip 10.33.128.0 0.0.0.255 193.67.42.192 0.0.0.63 log access-list 102 deny ip 192.168.14.0 0.0.0.255 193.67.42.192 0.0.0.63 log access-list 102 deny ip any host 255.255.255.255 log access-list 102 deny ip any any log snmp-server engineID local 0009023019551860 snmp-server community 8xYchi9 RW 25 snmp-server community public view v1default RO snmp-server host 193.78.95.57 public snmp-server host 194.229.160.67 public ! ! ! tacacs-server host 194.229.163.68 tacacs-server key GHosa7X ! ! line con 0 password 7 09681F081700 login authentication console transport input none line aux 0 line vty 0 4 password 7 0222555A0503 login authentication vty-access ! ntp clock-period 17180275 ntp server 10.32.32.33 end I am not sure if I am missing a major concept here. I appreciate your help. Thanks in advance. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. [GroupStudy.com removed an attachment of type image/gif which had a name of CBAC.gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4508t=4508 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
IP extended access list question [7:4321]
Hello colleagues, I am trying to block all IP traffic from host A to host B except for ICMP echo replies. This is the access list I hve configured: access-list 100 permit icmp host 171.21.10.2 host 171.21.50.2 echo log access-list 100 permit icmp host 171.21.10.2 host 171.21.50.2 echo-reply log access-list 100 deny ip host 171.21.10.2 host 171.21.50.2 I then apply this access list as inbound to Ethernet0: Ethernet0 ip address 171.21.50.1 ip access-group 100 in However, when I try to ping 171.21.50.2 from 171.21.10.2, I get a no reply, and the access list logs matches under the deny entry. I wonder if I am missing something or might have the syntax wrong. Do you have any ideas ? Thanks in advance for your help. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4321t=4321 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CBAC on subinterfaces [7:3787]
Hello colleagues, I wonder if it is possible to configure context-based access control between subinterfaces on the same router. Is the concept of external and internal networks still valid when it comes to subinterfaces ? Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3787t=3787 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing to different destinations from same source [7:3569]
Hello colleagues, I want to route to two different destinations from the same source addresses. The souces are Windows NT machines with two default gateways; I want everything going to the Internet going out to one of the gateways, and everything else going out the other. I am not sure if configuring access lists does the job; when a packet from the source is denied, does it then automatically choose the other default gateway ? I guess policy routing won't work, since the source is the same, only the destinations are different. Any ideas ? Thanks in advance for your help. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3569t=3569 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Outbound access lists [7:3174]
Hello colleagues, I am trying to configure outbound access lists between 4 FastEthernet subinterfaces (with 4 different VLANs configured), so that the VLANs cannot communicate with each other. The problem is that inbound access lists work fine, but when I configure outbound access lists (e.g. on FastEthernet0/0.1 to deny traffic to FastEthernet0/0.2) nothing happens. I wonder if this is inherent to trying to configure outbound access lists between (sub)interfaces on the same router. Does anybody know ? Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3174t=3174 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Windows 95 Dial-Up to Cisco 1603 [7:2173]
Hello colleagues, I have a Windows 95 client that I want to be able to dial in to a Cisco 1603. The Cisco 1603 is configured for callback accepts. The problem is that the client dials in, the call is then disconnected, the router initiates the callback, but during the verification of username and password the connection is dropped, and Windows 95 comes with an error message saying that a compatible set of network protocols cannot be found. I have checked all the settings, but am unable to find the reason. Any suggestions, or has any of you come across this before ? Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2173t=2173 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing Table Size on 6509 MSFC [7:2174]
Hello colleagues, I have a Catalyst 6509 with an MSFC card, do you know if there is a command to view the size of the routing table ? I need to know because I am planning to add a fair amount of VLANs, and I want to make sure that the card can handle it. Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2174t=2174 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SNMP Errors [7:473]
Hello colleagues, when I do a 'sh snmp' I get the following output: "270479 No such name errors" Do you know what that means ? Thanks for your help in advance. Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=473t=473 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN B-Channel admined down
Hello colleagues, do you know how I can admin up an ISDN B-Channel ? This is what the config on my router lools like: BRI0/0 10.66.1.11 YES NVRAM standby mode down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down When I try to access the BRI0/0:1 or BRI0/0:2, the system tells me that I cannot access the B-channel. Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN B-Channel admined down
Hi, doesn't work. The problem is that BRI0/0 is in standby mode, while both B-Channels are admined down. Doesn't make any sense to me. How can I get them into down/down mode ? Regards, Hans From: "EA Louie" [EMAIL PROTECTED] To: "Hans Stout" [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: ISDN B-Channel admined down Date: Fri, 6 Apr 2001 08:24:54 -0700 in privileged exec (enable) mode, type config t interface bri0 no shutdown -e- - Original Message ----- From: "Hans Stout" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, April 06, 2001 6:50 AM Subject: ISDN B-Channel admined down Hello colleagues, do you know how I can admin up an ISDN B-Channel ? This is what the config on my router lools like: BRI0/0 10.66.1.11 YES NVRAM standby mode down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down When I try to access the BRI0/0:1 or BRI0/0:2, the system tells me that I cannot access the B-channel. Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN testing question
Hello colleagues, I have a question regarding how to test an ISDN connection for a dialer interface that is mapped to a loopback interface. I am used to dialer map statements where I can ping the IP address that the dialer is mapped to, and that brings up the ISDN link. The interface I want to test now does not have dialer map statements, but looks like this: interface Dialer102 description IDSN Callback ID - Cologne, Germany ip unnumbered Loopback1 encapsulation ppp no ip route-cache ip ospf cost 1500 no ip mroute-cache dialer pool 1 dialer remote-name Router-Cologne dialer idle-timeout 300 dialer string 0031302341498 dialer string 0031302882561 dialer string 0031302893245 dialer string 0031302883823 dialer caller 31302883823 callback dialer caller 31302893245 callback dialer caller 31302882561 callback dialer caller 31302341498 callback dialer load-threshold 64 either dialer-group 1 no fair-queue pulse-time 0 no cdp enable ppp authentication chap callin ppp chap hostname HUB-ROUTER ppp multilink Is there a way to test if the ISDN works without bringing down the serial line ? Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
System Flash Read Only
Hi colleagues, I just installed some third party flash memory into my 2501, and the 'sh ver' says that the system flash is read only. How can I change that to read/write ? Is that a configuration register setting ? Or a jumper setting ? Thanks for your advice in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SH RUN reveals encrypted password
Hello colleagues, do you know if there is a way to make the line 'enable secret 5 $1$vwIl$YEZxTVGPapUUVCD.c54Ya' invisible when doing a 'sh run' in user mode ? The problem is that I want to allow RO access and also allow to execute the 'sh run' command, but that with a password decryptor, one could eaily decrypt the enable password. Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Reverse Telnet to reset modem
Hello colleagues, I have heard that there is a way to reverse telnet into an (analog) modem that is attached to the console or AUX port of a Cisco router and to reset the modem this way. Does anybody know the exact command sequence ? Thanks for your help in advance. Regards, Hans _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BRI interface not calling
Hello colleagues, I have a problem with two BRI interfaces on my Cisco 2610: On both interfaces, I have static dialer maps configured to two separate locations, so the total is 4 locations to be dialed, two on BRI1/0, and two on BRI1/1. Th problem is that two calls at a maximum are made, and the remaining two connections are not made. I can make one call on BRI1/0 and one on BRI1/1, or two on BRI1/0, or two on BRI1/1, but never four at the same time. I have verified that all locations are reachable, but it seems that only two ISDN calls are allowed at the same time. I am unable to figure it out; I have attached the router config, maybe you have an idea ? MTDP_Saarbruecken_29347#sh run Building configuration... Current configuration: ! ! Last configuration change at 11:54:01 GMT Sun Jan 21 2001 ! NVRAM config last updated at 10:22:29 GMT Sun Jan 21 2001 ! version 11.3 service timestamps debug datetime msec localtime service timestamps log datetime localtime service password-encryption ! hostname MTDP_Saarbruecken_29347 ! enable secret 5 $1$I.82$PNonsJvJ7Mjydwhw71IbI0 ! username MTDP_Nemesvamos_29348 password 7 01040554565A username MTDP_Eislingen_29354 password 7 10590A490846 username MTDP_StEtienne_29350 password 7 095B4D591454 username MTDP_Valmont_29349 password 7 0211070B0657 ip subnet-zero no ip source-route no ip finger no ip bootp server no ip domain-lookup ipx routing 00b0.6456.6f20 isdn switch-type basic-net3 clock timezone GMT 0 ! ! process-max-time 200 ! interface Ethernet0/0 description connected to MTD Saarbruecken,DE LAN ip address 10.66.2.1 255.255.254.0 ip access-group 190 in no ip redirects no ip directed-broadcast no ip proxy-arp bridge-group 1 ! interface Serial0/0 description MTD Saarbruecken,DE MCIWorldcom CKT W0B04528 no ip address encapsulation frame-relay bandwidth 512 frame-relay lmi-type ansi ! interface Serial0/0.22 point-to-point description connected to Root_Beer ip address 10.1.200.30 255.255.255.252 frame-relay interface-dlci 22 ! interface Serial0/0.31 point-to-point description DLCI 32 to MTD Nemesvamos,HU DLCI 77 MCIWorldcom CKT W0B04175 ip address 10.66.0.25 255.255.255.252 no arp frame-relay bandwidth 64 traffic-shape rate 128000 7936 7936 1000 traffic-shape adaptive 64000 frame-relay interface-dlci 32 ! interface Serial0/0.33 point-to-point description DLCI 33 to MTD StEtienne,FR DLCI 34 MCIWorldcom CKT W0B05935 ip address 10.66.0.9 255.255.255.252 no arp frame-relay bandwidth 64 traffic-shape rate 128000 7936 7936 1000 traffic-shape adaptive 64000 frame-relay interface-dlci 33 ! interface Serial0/0.35 point-to-point description DLCI 35 to MTD Valmont,FR DLCI 36 MCIWorldcom CKT W0B06090 ip address 10.66.0.5 255.255.255.252 no arp frame-relay bandwidth 64 traffic-shape rate 128000 7936 7936 1000 traffic-shape adaptive 64000 frame-relay interface-dlci 35 bridge-group 1 ! interface Serial0/0.37 point-to-point description DLCI 37 to MTD Eislingen,DE DLCI 38 MCIWorldcom CKT W0B04530 ip address 10.66.0.1 255.255.255.252 no arp frame-relay bandwidth 64 traffic-shape rate 128000 7936 7936 1000 traffic-shape adaptive 64000 frame-relay interface-dlci 37 ! interface Serial0/0.39 point-to-point description DLCI 39 to MTD Marchtrenk,AU DLCI 40 MCIWorldcom CKT W0B22520 ip address 10.66.0.13 255.255.255.252 no arp frame-relay bandwidth 32 traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 39 ! interface Serial0/0.41 point-to-point description DLCI 41 to MTD Falkoping,SE DLCI 42 MCIWorldcom CKT W0B13531 ip address 10.66.0.17 255.255.255.252 no arp frame-relay bandwidth 32 traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 41 ! interface Serial0/0.43 point-to-point description DLCI 43 to MTD Randers,DK DLCI MCIWorldcom CKT W0A99203 ip address 10.66.0.21 255.255.255.252 no arp frame-relay bandwidth 32 traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 43 ! interface Serial0/0.983 point-to-point description Worldcom Mgmt - gnm6-rtra - dlci 145 ip address 10.66.0.253 255.255.255.252 frame-relay interface-dlci 983 ! interface BRI1/0 ip address 10.66.1.1 255.255.255.248 encapsulation ppp bandwidth 8 dialer map ip 10.66.1.2 name MTDP_Eislingen_29354 broadcast 07161990837 dialer map ip 10.66.1.3 name MTDP_Nemesvamos_29348 broadcast 003688505520 dialer-group 1 isdn switch-type basic-net3 ppp authentication chap hold-queue 75 in ! interface BRI1/1 ip address 10.66.1.9 255.255.255.248 encapsulation ppp bandwidth 8 dialer map ip 10.66.1.10 name MTDP_StEtienne_29350 broadcast 0033232919344 dialer map ip 10.66.1.11 name MTDP_Valmont_29349 broadcast 0033387298719 dialer-group 1 isdn switch-type basic-net3 ppp authentication chap bridge-group 1 hold-queue 75 in ! interface BRI1/2 no ip address encapsulation ppp shutdown dialer-group 1 isdn switch-type basic-net3 ppp authentication chap ! interface BRI1/3 no ip address encapsulation ppp shutdown dialer-group
Changing IP address on Ethernet
Hello colleagues, I have come across a problem on my LAN which I can't seem to figure out: I need more host addresses on my LAN, so I changed the subnet mask on my Ethernet IP address to a 22-bit subnet mask (was 10.226.192.254/24, is now 10.226.192.254/22). The problem I am having now is that I cannot ping the Ethernet interface anymore (even from the same router). Do I have to change the subnet mask for the default gateway on the hosts attached to the LAN first before I can ping the interface ? It seems to me that I should be able to ping my Ethernet interface, regardless of what IP address is configured, as long as the status is up/up. Thanks for your input in advance. Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN switch type
Hello colleagues, I have heard that after changing the ISDN switch type (both global and interface config) the router needs to be reloaded for the change to take effect. Do you know if that is true ? Thanks for your help in advance. Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DRAM Upgrades for 1601R
Hi colleagues, I have two 1601R routers, and I want to upgrade them from their standard 8MB DRAM to 16MB DRAM. I have a few questions about this: 1. Is the DRAM the same for the entire 1600 series ? So can I use the DRAM form a 1603R for the 1601R ? 2. When I buy an additional 8MB of DRAM, can I add that on without problems to the already existing (standard) 8MB in the 1601R ? (I am referring to the problems that exist with PCs, when the PC needs matching SIMMs). Thanks for your help in advance. Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2501 not booting properly
Hello colleagues, I have a 2501 router that apparently doesn't boot anymore; when I turn it off and on, the system/ok LED doesn't blink and immediately goes to 'steady'. I cannot get a router prompt through the console port, all I get are some 'rubbish' characters. Has any of you seen something similar yet ? I am used to see the system/ok LED blinking during the boot process and then go to steady. Can that indicate a memory and/or hardware failure ? Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No reference clock
Hello colleagues, I have configured a network with an NTP server and several ntp clients. When I do a 'sh ntp ass', some of the servers have a reference clock, while others don't (they have 0.0.0.0 as a reference clock). What makes the server connect with the reference clock ? And why do some of the servers not connect ? Thanks for your advice in advance. Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How much memory do I have ?
Hello colleagues, can you tell me how much memory is on the router when you look at the following output: cisco 3640 (R4700) processor (revision 0x00) with 43008K/6144K bytes of memory. 8192K bytes of processor board System flash (Read/Write) I cannot figure out if I have to add the 43008K/6144K to get the total of DRAM. In this case, do I have 51MB of DRAM ? Thanks for your help in advance. Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Disconnecting ISDN
Hello colleagues, do you know if there is an IOS command that allows to disconnect an ISDN call ? So far, I usually shutdown the BRI to disconect the call, but I have a feeling there might be an easier way. Thanks for your help in advance. Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Relay problem
Hi colleagues, I have a problem with my frame relay connection; the serial interface is up/down, and when I debug the serial interface, I can see that the interface is constantly trying to restart:23w5d: Serial5/0: attempting to restart: --More-- 23w5d: Serial5/0(out): StEnq, myseq 4, yourseen 0, DTE down --More-- 23w5d: Serial5/0(out): StEnq, myseq 5, yourseen 0, DTE down What could be the reason for this ? I'll add the output for the sh int: Serial5/0 is up, line protocol is down Hardware is M4T MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, crc 16, loopback not set Keepalive set (10 sec) LMI enq sent 240, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 05:47:09, output 00:00:02, output hang never Last clearing of "show interface" counters 00:39:54 Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 354 packets output, 4649 bytes, 0 underruns 0 output errors, 0 collisions, 80 interface resets 0 output buffer failures, 0 output buffers swapped out 80 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=u Thanks for your help in advance. Georg _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ATM deaming/line encoding problem
Hello colleagues, I have a problem with my ATM connection from my Cisco router to a Cisco BPX ATM switch. When I look at the line on the switch, the line status is ok. When I run the 'sh cont atm 1/0' command, I get the following output (maybe anybody as an idea on where the error could be); I know this is going to be a very long mail, but I can't help it: zrh-atm#sh contr atm1/0 Interface ATM1/0 is down Hardware is ATM E1 LANE client MAC address is 0002.4b76.0dd0 hwidb=0x81472004, ds=0x8148C564 slot 1, unit 0, subunit 0 rs8234 base 0x4080, slave base 0x4080 rs8234 ds 0x8148C564 SBDs - avail 2048, guaranteed 1, unguaranteed 2047, starved 0 Seg VCC table 4080B800, Shadow Seg VCC Table 814A8380, VCD Table 814BE3AC Schedule table 40816800, Shadow Schedule table 814C43D8, Size 7CD RSM VCC Table 4082BD00, Shadow RSM VCC Table 814C9414 VPI Index Table 40829280, VCI Index Table 4082B900 Bucket2 Table 40820480, Shadow Bucket2 Table 814C6338 MCR Limit Table 40820880, Shadow MCR Table 814C7F64 ABR template 40820A80, Shadow template 811FF798 RM Cell RS Queue 40829900 Queue TXQ Addr Pos StQ Addr Pos 0 UBR CHN0 40825A80 0028B4EA0 0 1 UBR CHN1 40825E80 0028B56A0 0 2 UBR CHN2 40826280 0028B5EA0 0 3 UBR CHN3 40826680 0028B66A0 0 4 VBR/ABR CHN0 40826A80 0028B6EA0 0 5 VBR/ABR CHN1 40826E80 0028B76A0 0 6 VBR/ABR CHN2 40827280 0028B7EA0 0 7 VBR/ABR CHN3 40827680 0028B86A0 0 8 VBR-RT CHN0 40827A80 0028B8EA0 0 9 VBR-RT CHN1 40827E80 0028B96A0 0 10 VBR-RT CHN2 40828280 0028B9EA0 0 11 VBR-RT CHN3 40828680 0028BA6A0 0 12 SIG 40828A80 0028BAEA0 0 13 VPD 40828E80 0028BB6A0 0 Queue FBQ Addr Pos RSQ Addr Pos 0 OAM 408EBD00 132 028BBF60 133 1 UBR CHN0 408ECD00 0028BCF60 0 2 UBR CHN1 408EDD00 0028BDF60 0 3 UBR CHN2 408EED00 0028BEF60 0 4 UBR CHN3 408EFD00 0028BFF60 0 5 VBR/ABR CHN0 408F0D00 8028C0F60 9 6 VBR/ABR CHN1 408F1D00 0028C1F60 0 7 VBR/ABR CHN2 408F2D00 0028C2F60 0 8 VBR/ABR CHN3 408F3D00 0028C3F60 0 9 VBR-RT CHN0 408F4D00 0028C4F60 0 10 VBR-RT CHN1 408F5D00 0028C5F60 0 11 VBR-RT CHN2 408F6D00 0028C6F60 0 12 VBR-RT CHN3 408F7D00 0028C7F60 0 13 SIG 408F8D00 0028C8F60 0 SAR Scheduling channels: -1 -1 -1 -1 -1 -1 -1 -1 ATM channel number is 0 Link 0 IMA Info: group index is 99 Tx link id is 0, Tx link state is notInGroup Rx link id is 99, Rx link state is notInGroup Rx link failure status is noFailure, 0 tx failures, 1 rx failures Link 0 Framer Info: framing is Multiframe-CRC4, line code is HDB3, impedance is 120 ohm clock src is line, payload-scrambling is enabled, no loopback line status is 0x420; or Rx LOF, Tx LOMF. port is active, link is unavailable 36213058 idle rx, 1917 correctable hec rx, 309882 uncorrectable hec rx 2248 cells rx, 0 cells tx, 0 rx fifo overrun. Link (0):DS1 MIB DATA: Data in current interval (298 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 331 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 332 Unavail Secs Total Data (last 9 15 minute intervals): 8191 Line Code Violations, 0 Path Code Violations, 0 Slip Secs, 8100 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins, 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 8100 Unavail Secs SAR counter totals across all links and groups: 0 cells output, 0 cells stripped zrh-atm#sh I also include the configuration of the router: sho run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname zrh-atm ! logging buffered 4096 debugging enable secret 5 * ! ! ! ! ip subnet-zero ! ! ! interface FastEthernet0/0 ip address ***.***.***.*** 255.255.255.0 no ip redirects no ip directed-broadcast ip accounting output-packets duplex auto speed auto ! interface FastEthernet0/1 no ip address no ip directed-broadcast shutdown duplex auto speed auto ! interface ATM1/0 description ATM MCIWORLDCOM Main Interface 2 Mbit/s no ip address no ip directed-broadcast load-interval 60 no atm ilmi-keepalive scrambling-payload impedance 120-ohm ! interface ATM1/0.1 point-to-point description ATM MCIWORLDCOM PVC Link to Walldorf bandwidth 2048 ip address ***.***.***.*** 255.255.255.252 no ip directed-broadcast pvc 8/1 vbr-nrt 1854 1854 1 no ilmi manage oam-pvc 60 encapsulation aal5snap ! ! interface ATM1/1 no ip address no ip directed-broadcast shutdown no atm ilmi-keepalive scrambling-payload impedance 120-ohm ! interface ATM1/2 no ip address no ip directed-broadcast shutdown no atm ilmi-keepalive scrambling-payload impedance 120-ohm ! interface ATM1/3 no ip address no ip
BGP on Cisco 1601 with 12.0(3)T IOS
Hello colleagues, I have two Cisco 1601's running IOS version 12.0(3)T on which I try to implement BGP as a routing protocol. When I am in config mode, I can see that BGP is an option, but when I type 'router bgp 10', the system returns 'unknown routing protocol'. Are there any special requirements to run BGP ? Thanks for your help in advance ! Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Carrier transitions
Hello colleagues, do you know what causes carrier transitions on a serial interface ? Is it when the serial status changes from up/up to up/down, or when it changes to down/down, or both ? Thanks for your help in advance. Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Standard Cisco passwords
Hi colleagues, do you know what the Cisco standard passwords are ? As far as I remember, they are 'cisco' and 'sanfran', but I am not sure (also not sure about lower/upper case). Thanks for your help in advance. Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
3620 Modem Pooling
Hello colleagues, do you know if it is possible to configure different modem pools on a 3620 ? And if so, does it matter what kind of modem module I use (6/12/18/24/30-port digital modem or 8/16-port analog modem) ? Can I just use the modem-pool IOS command ? Thanks in advance for your help, I couldn't find any docs online on this. Regards, Georg Pauwen Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Modem not connected to con/aux port ?
Hello colleagues, I wonder if any of you know if there is a way to find out by looking at the configuration of a router if there is a modem connected to the aux or console port ? I have a router which should have a modem attached to it, but when I try to dial in, I get a NO CARRIER response. I suspect that the cable from the modem is not attached to the router, but I cannot ask anybody at the site if that is really the case. Now I wonder if there is a way (maybe a DEBUG command) to find out if there is physically anything connected to the aux or console port ? I can TELNET to the router and access the configuration. Thanks for your help in advance ! Regards, Georg Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN interface problem
Hi Larry, thanks for your answer. What exactly do you mean by enabling the interface first ? My concern is that I do not see any lit LEDs on the interface. Can you tell me what a status of standby/down means ? How can I get the interface in up/up (spoofing) status ? Also, what do the carrier transitions mean ? I include the output from the sh int command: Ener_Erkath#sh int bri0/0 BRI0/0 is standby mode, line protocol is down Hardware is PQUICC BRI Internet address is 10.90.1.70/30 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, rely 255/255, load 1/255 Encapsulation PPP, loopback not set Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 21139976 packets output, 2239721261 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out 140 carrier transitions From: LARRY OSEI-KWAKU [EMAIL PROTECTED] Reply-To: LARRY OSEI-KWAKU [EMAIL PROTECTED] To: Hans Stout [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: ISDN interface problem Date: Fri, 21 Jul 2000 05:10:29 -0700 (PDT) I think you will need to enable the interface first before you can set the switch type. Larry Osei Lodnon Uk --- Hans Stout [EMAIL PROTECTED] wrote: Hi there colleagues, I have a problem with my ISDN interface on a Cisco 2610 router. I just had a Telekom engineer at the site verify that the line is ok to the interface, but he cannot see any lights burning on the intreface (B1 and B2 LEDs). When I do a sh isdn status, I get the following: Ener_Erkath#sh isdn status Global ISDN Switchtype = basic-net3 ISDN BRI0/0 interface dsl 0, interface ISDN Switchtype = basic-1tr6 Layer 1 Status: DEACTIVATED Layer 2 Status: Layer 2 NOT Activated Layer 3 Status: 0 Active Layer 3 Call(s) Activated dsl 0 CCBs = 0 The Free Channel Mask: 0x8003 Total Allocated ISDN CCBs = 0 When I change the ISDN switchtype to basic-net3, it doesn't change the status of the ISDN. Here is the output from the sh int bri0/0: Ener_Erkath#sh int bri0/0 BRI0/0 is standby mode, line protocol is down Hardware is PQUICC BRI Internet address is 10.90.1.70/30 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, rely 255/255, load 1/255 Encapsulation PPP, loopback not set Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 21036936 packets output, 2224160372 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out 140 carrier transitions Does anybody know if this could just mean that the interface is not functioning at all ? What do the carrier transitions mean ? And what does 'standby mode' mean ? I am also not able to bounce the interface (shutdown/no shutdown doesn't change the status on the interface, it remains in standby mode). Thanks for your help in advance ! Regards, Georg Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Get Yahoo! Mail Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.c
