[Elecraft] Wanted: Elecraft KAT 100
Hi guys, I am after a fully build and working Elecraft KAT 100 to compliment my K2. I have recently moved to Adelaide / South Australia and K2 is the only radio I have here with limited options for antennas. I am willing to pay for the postage, payment would be by paypal, I am trusted so you don't have to worry about anything . Can anyone help me, please? Many thanks. Oliver VK5RK (ex. VK8DX, 4W6A, MW0JRX, OM0ARX) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 and Keyboard
Roger, I would like to point out that I have been trying to encourage others to learn cw by using the keyboard to send perfectly spaced cw at set speeds. It has memories that can be used for this as well. Dick, n0ce - Original Message - From: Don Wilhelm To: K8RS Cc: Elecraft Group Sent: Saturday, June 29, 2013 3:18 PM Subject: Re: [Elecraft] P3 and Keyboard Roger, If you mean PSK31 and RTTY modes, that will do it. BTW, P3 Utility is not the firmware itself, but a means of downloading and installing firmware updates - it runs on the computer, and is not needed once that task is completed. If you want other data modes, you will have to run the K3 in DATA A or AFSK A and use a soundcard oriented application on your computer. 73, Don W3FPR On 6/29/2013 3:50 PM, K8RS wrote: What is needed besides the K3 + P3 with the SVGA board, a USB keyboard and the latest P3 Utility firmware to run the Data modes via the P3? Roger K8RS K3 S/N 280, P3, KPA500 and KAT500 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Accessible Transceivers
Chris, Since you quoted my message at the end of your note below, I wanted to reply. I've been using my KX3 for almost a year now and have been very successful operating it via the CW user interface as a totally blind ham. If your friend has any questions, I would be happy to answer them (as I'm sure Buddy, KB5ELV and several other blind KX3 owners would). 73, Jim, KY2D -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Chris Johnson Sent: Saturday, June 29, 2013 8:06 PM To: elecraft@mailman.qth.net; Wayne Burdick Subject: Re: [Elecraft] Accessible Transceivers Has the CW UI been enabled yet? I have a friend who really needs it, just like the KX1 did it. On Aug 23, 2012, at 12:58 PM, Jim Kutsch jimkut...@yahoo.com wrote: Wayne, I'm one of those blind hams with a KX3 now that #1291 arrived at my QTH this week. I want to publically thank you for Elecraft's commitment to accessibility. The Morse UI is outstanding! And, of course the KX3 is an outstanding radio. I am looking forward to even more access through the Morse UI in future firmware releases. If I can help in any way, please ask. 73, Jim, KY2D Morse -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Thursday, August 23, 2012 11:44 AM To: Buddy Brannan Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Fwd: Accessible Transceivers Looks good, Buddy. I've already contacted them, and will be happy to provide whatever support they need to accurately control all of our gear. As for the KX3, don't worry--I'll be adding many more built-in Morse UI features. 73, Wayne N6KR On Aug 23, 2012, at 7:16 AM, Buddy Brannan wrote: High praise indeed for the K3, and for the accessory mentioned at http://www.hampod.com Rumor is that the Hampod guys want to get it also working with the W2, and with the KX3 for those guys who can't do the morse UI. Wayne, that doesn't mean stop working on the morse UI, another box to carry around makes the KX3 a lot less portable, thanks. Although it will solve the whole PSK decode problem. BTW, I now know of three KX3's that live with blind hams, and at least three K3's. Doesn't mean there aren't more of both. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY Begin forwarded message: From: Armand Bakalian asbakal...@comcast.net Subject: Accessible Transceivers Date: August 23, 2012 2:58:31 AM EDT To: blind-h...@listserv.icors.org Reply-To: For blind ham radio operators blind-h...@listserv.icors.org Greetings to All, Reviewing some of the message traffic on the list, I see a lively discussion about which rigs are more accessible for instance, the Kenwood TS2000, 480, 590, and some of the Icom radios, which in my opinion are limited in what they tell the operator. A week or so ago, I took the leap into the twenty-first century, when I purchased an Elecraft K3 transceiver. We know the reputation, and versatility, and expandability of the K3--why even some of the operators on this list have taken the plunge. In my humble opinion, after being a ham for forty-six years, there is no better combination than the Elecraft K3, and our own Rob Santello's Hampod. Kenwood, Icom, and lastly Yaesu, can't hope to hold a candle to what K6DQ has built, the Hampod K3 Reader. I seriously doubt that there isn't anything that the K3 Reader doesn't tell you about what the K3 is doing. Rob has even built in some macros that perform vital functions for blind ops, with a simple push of a button. Sighted folks don't get that kind of service from their visual display. Further, can you tell me which Kenwood rig will decode CW and PSK31, and and read it aloud to you? If there is one, I must have missed it. The elegance and cutting edge technology employed in the K3 is brought to life for the owner by the Hampod K3 Reader. I was amazed to find that the radio even has a temperature sensor in the front panel that can be queried by the Hampod, to tell you the ambient temperature. Now that's really slick. The K3 Reader which was developed by Rob, K6DQ over many months, and is still evolving is a labor of love from which we all can benefit. Rob hand-builds each unit, and, as some on this list can attest, he stands behind what he does, providing service that any larger company can't duplicate. It didn't work, and the owner had a brand new unit in his hands within less than a week, newly assembled and tested. Some may grumble that the Elecraft is expensive. In my opinion, the prospective owner can scale the radio to his budget. Limited funds, you can start small, and since the radio is modular in design and operation, you can add options to the radio as finances allow. Start out with the ten watt version of the
Re: [Elecraft] looking for iPad software
Does RUMlog work with Windows ? Tnx Paul kc2nyu Message: 20 Date: Sat, 29 Jun 2013 13:27:28 -0700 From: Jeff Ellis driftenli...@gmail.com To: bill.va...@gmail.com Cc: elecraft list elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Message-ID: CAD2XheLiycJfOatJuoS7mVRo9uUwY48b1Tx=teq_c1kykuu...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 Two good packages are Hamlog and RUMlog. Both work with the iPad and KX3 if you have a piglet/pigail serial to wifi bridge. Both can be used with out rig control. RUMLog also can interchange files with the Mac version of the program via DropBox to make things easy. I like the UI better on RUMLog as a logging program and it has easier access to standard features. Hamlog has a nicer rig control screen. Hope that helps Jeff, K7GDE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] looking for iPad software
No it does not. But is excellent for Mac and my iPad. 73, Fred/N0AZZ K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100 P3/SVGA--KPA500--KAT500--W2 -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of paul ecker Sent: Sunday, June 30, 2013 7:30 AM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Does RUMlog work with Windows ? Tnx Paul kc2nyu Message: 20 Date: Sat, 29 Jun 2013 13:27:28 -0700 From: Jeff Ellis driftenli...@gmail.com To: bill.va...@gmail.com Cc: elecraft list elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Message-ID: CAD2XheLiycJfOatJuoS7mVRo9uUwY48b1Tx=teq_c1kykuu...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 Two good packages are Hamlog and RUMlog. Both work with the iPad and KX3 if you have a piglet/pigail serial to wifi bridge. Both can be used with out rig control. RUMLog also can interchange files with the Mac version of the program via DropBox to make things easy. I like the UI better on RUMLog as a logging program and it has easier access to standard features. Hamlog has a nicer rig control screen. Hope that helps Jeff, K7GDE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 3204/6450 - Release Date: 06/29/13 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] NA3DX Field Day Article
The article includes photo's of the main operator station with KX3s. http://www.capitalgazette.com/lifestyle/living/smooth-operators-ham-radio-buffs-compete-in--hour-marathon/article_0cd7762f-e8f5-5c33-88b6-9236d02fe5b3.html?mode=imagephoto=1 73, Doug, NA1DX -- Dream Large, Train Wise, Race Fast! Doug Ellmore, Sr. - Head Coach, Southern HS Cross Country, Track and Field / www.southernathletics.org - Pancreatic Cancer Action Network Purple Swim Race Director / www.purpleswim.org d...@ellmore.net / dellm...@pancanvolunteer.org 301-807-2193 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 40m transmitter alignment: Low Current?
Chris, Yes, those currents are too small for normal operation. That sort of thing could happen if you are not driving a 50 ohm pure resistive load. Do you have a good dummy load on the K2? Is the coax (and any adapters) between the K2 and the dummy load good? The reason for the above question is the way the basic K2 detects power output and also the way it controls the power output level. The detector is not a wattmeter, it is a diode detector and reports the RF voltage to the microprocessor. If the impedance at the antenna jack is higher than 50 ohms, the RF voltage will be higher than normal and the microprocessor will calculate the power wrong. If your dummy load and coax are good, you will have to will have to do some analysis. The easiest would be to check the internal current metering - use you DMM to measure the input current and compare that with the reading on the K2 - they should agree within 5 or 10 percent. If not, check the Current Sense components on the Control Board (schematic will tell you which ones they are). If the internal current meter is correct, then use an RF probe to measure the RF voltage developed at the K2 output jack and compute the power based on that RF voltage - V squared divided by 50 - compare that value to the power reported by the K2. If those values are significantly different, check the components in the RF Detector section of the RF Board - schematic sheet 4 in the lower right corner. 73, Don W3FPR On 6/29/2013 9:03 PM, ChrisM wrote: I just finished my K2, #7054, and am doing the 40m transmitter allignment. Power Supply 12v 29amp switching. Voltage and Current at 11.7v and approx 220mA, Freq at 7100. I peaked L1 and L2 no problems. Have 2W on setting and reading approx 2W with internal power meter. When I set the power to 5W Internal meter measured approx 5W but current only increased to just over 500mA. At 10W internal meter read a bit over 10W but current only at approx 660mA. No change in voltage. The manual states the current should be 1.3 to 1.6 Amps at 5W and 1.8 to 2 Amps at 10W. I have read about little or no power out with high current, but not good power out with almost no current increase. Could the power meter/or current meter be incorrect, did I mess something up, or is this Ok (Some Kind of Magic)? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 - AC hum in the monitor
Hoping you all will have some good ideas on a cure for this problem. I am hearing AC hum in my monitor headphones - ONLY when transmitting. The hum comes and goes instantly when the KPA500 is switched on/off. Same with other headphones. No question it's related to the amp but not necessarily the fault of the amp. I have gone over every connection related to the amp with no change. Fortunately it hasn't made its way to my signal. Help wanted! Jack - WE5ST __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 Transverter set up query
Hi All, I have a K2 with K60XV module, and I have an XV50 transverter set up as TRN1 all working fine and K2 is showing correct frequency when using the KV50. The TRN settings are : RF 50 IF 28 OFS0 Power out L1.00 Adr TRN1 Now, I want to add a VLF receive converter (this provides 0-150khz coverage) as TRN2 I have set this up as: RF 0 IF 28 OFS0 Power out L0.01 Adr TRN2 I temporarily have the XV50 disconnected entirely and the VLF converter connected to the transverter IN phono socket on my K2. I have two issues: 1 The VLF converter is working on TRN1 although the frequency naturally shows 5 to 50150Khz but it does NOT work on TRN2. No received signals at all. 2On TRN2 the frequency readout shows a frequency of around 86Mhz - 87Mhz and no signals from the VLF converter. Can anyone suggest what I'm doing wrong here please. I'm wondering if I need to connect the VLF converter via the XV50 which to enable the switching to work correctly somehow. I'd be most grateful for any suggestions. Please copy any replies to my e mail address. 73, Vic GW4JUN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft Radios for Sale
PLEASE REPLY OFFLIST IF INTERESTED K2/10 serial #6XXX Purchase Date July 8, 2010 Options include: KAF2 Audio Filter and Real Time Clock KAT2 Automatic Antenna Tuner KNB2 Noise Blanker Toroids were pre-wound by “The Toroid Guy” N8BX Brass Knob All original documentation As equipped, the original cost was $1200. I will sell for $600 + actual cost for UPS professional packing, insurance, signature confirmation and shipping cost to your CONUS zip code. K1-4 (80, 40, 20, 15) serial #2XXX Purchase Date April 8, 2011 Options include: K1 Backlight KAT1 Automatic Antenna Tuner KNB1 Noise Blanker Toroids were pre-wound by “The Toroid Guy” N8BX Brass Knob All original documentation As equipped, the original cost was $600. I will sell for $300 + actual cost for UPS professional packing, insurance, signature confirmation and shipping cost to your CONUS zip code. I built the K1 and K2 myself. My credentials include 53 years in amateur radio, Amateur Extra Class License, all commercial licenses (GROL with Ship Radar, GMDSS Maintainer, 2nd Class Radiotelegraph Certificate). Non-smoking environment. Cosmetically, both the K1 and K2 are 10 out of 10. Operationally, everything works as it should on the K2 and there are no issues. The K1 exhibits its characteristic drift for a few minutes when first turned on but no other issues. PAYPAL and CONUS only. Reason for selling: My little KX3 is all the radio I need for my exclusive QRP CW operating. Breaks my heart to see the K1 and K2 just sitting unused on the shelf. Thanks and 73, Stan WB2LQF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft magnetic Hex Key
Hi All, I am curious, is Elecraft still selling the magnetic hex key with their name on it? I looked on the web site's product page, but can not seem to find it. Any ideas? 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Transverter set up query
Vic, To get the frequency to display correctly, do a Direct Frequency Entry for the band and that should straighten things up for you. Hold both BAND+/- buttons and enter 0 and all should be well. As for it not working on TRN2, the K2 does not care which transverter band is selected - The K2 does the same thing. When the power is set to the L range, it will receive a 28 MHz signal on the transverter IN jack. Try connecting a 28 MHz signal source to the IN jack and see if you have signals. Make certain you did not bump the VFO knob when exiting the transverter menu - that could place your power setting to the high range which would switch receive (and transmit) to the BNC jack. The only difference between TRN1 and TRN2 is the address sent to the transverter over the AUXBUS signal line. 73, Don W3FPR On 6/30/2013 10:12 AM, Vic wrote: Hi All, I have a K2 with K60XV module, and I have an XV50 transverter set up as TRN1 all working fine and K2 is showing correct frequency when using the KV50. The TRN settings are : RF 50 IF 28 OFS0 Power out L1.00 Adr TRN1 Now, I want to add a VLF receive converter (this provides 0-150khz coverage) as TRN2 I have set this up as: RF 0 IF 28 OFS0 Power out L0.01 Adr TRN2 I temporarily have the XV50 disconnected entirely and the VLF converter connected to the transverter IN phono socket on my K2. I have two issues: 1 The VLF converter is working on TRN1 although the frequency naturally shows 5 to 50150Khz but it does NOT work on TRN2. No received signals at all. 2On TRN2 the frequency readout shows a frequency of around 86Mhz - 87Mhz and no signals from the VLF converter. Can anyone suggest what I'm doing wrong here please. I'm wondering if I need to connect the VLF converter via the XV50 which to enable the switching to work correctly somehow. I'd be most grateful for any suggestions. Please copy any replies to my e mail address. 73, Vic GW4JUN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] looking for iPad software
OK, thanks Fred for feedback. 73 Paul kc2nyu From: Fred Smith m...@totalhighspeed.com To: 'paul ecker' ecke...@yahoo.com; Elecraft@mailman.qth.net Sent: Sunday, June 30, 2013 8:51 AM Subject: RE: [Elecraft] looking for iPad software No it does not. But is excellent for Mac and my iPad. 73, Fred/N0AZZ K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100 P3/SVGA--KPA500--KAT500--W2 -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of paul ecker Sent: Sunday, June 30, 2013 7:30 AM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Does RUMlog work with Windows ? Tnx Paul kc2nyu Message: 20 Date: Sat, 29 Jun 2013 13:27:28 -0700 From: Jeff Ellis driftenli...@gmail.com To: bill.va...@gmail.com Cc: elecraft list elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Message-ID: CAD2XheLiycJfOatJuoS7mVRo9uUwY48b1Tx=teq_c1kykuu...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 Two good packages are Hamlog and RUMlog. Both work with the iPad and KX3 if you have a piglet/pigail serial to wifi bridge. Both can be used with out rig control. RUMLog also can interchange files with the Mac version of the program via DropBox to make things easy. I like the UI better on RUMLog as a logging program and it has easier access to standard features. Hamlog has a nicer rig control screen. Hope that helps Jeff, K7GDE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 3204/6450 - Release Date: 06/29/13 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KX3 Key Paddle Option
I have a KX3 but I did not get the key paddle option. I am thinking of getting one because I may do some portable work where my current paddle of choice is just too much of a hassle. But, I am curious about one thing. Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. Is it better than the KX1 key paddles which I did have and took them off because they just never felt right -- I could not get used to them for some bizarre reason. Thanks. 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3-100 AT for sale
#660 with 2nd receiver 2 meter transveter built in. autotuner. Filter list 13 khz 6 2.1 400 hz 2nd rcvr 2.7 DVR board IF out for inboard xvtr 73cnc weighted knobs Non Smoking shack all for 3450 shipped USA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft Radios for Sale - SOLD
Both K1 and K2 sold within minutes of posting Thanks and 73, Stan WB2LQF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
Of course there are few things as personal as paddles. In that regard, modern CW paddles remind me of personal fountain pens of long, long ago. But, ignoring the subtle nuances of such personal preferences: 1) The KX3 paddles have levers that actually move, rather than the pressure-sensitive stationary paddles of the KX1. 2) Even so, the KX3 paddles are *very* rugged with steel pin bearings rather than tapered pivots with fragile points. You lift the KX3, complete with internal batteries, by the paddle arms without damaging the paddles or disturbing the adjustments. 3) Adjustments to the spacing and travel are made by two small Allen wrenches supplied with the KXPD3 paddles, so if you like to mess with the adjustments a lot, be sure to take them into the field with you. 73, Ron AC7AC -Original Message- I have a KX3 but I did not get the key paddle option. I am thinking of getting one because I may do some portable work where my current paddle of choice is just too much of a hassle. But, I am curious about one thing. Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. Is it better than the KX1 key paddles which I did have and took them off because they just never felt right -- I could not get used to them for some bizarre reason. Thanks. 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
Thanks Ron and the others who commented. I will probably be placing my order for the KX3 paddles this week. 73, phil, K7PEH On Jun 30, 2013, at 10:49 AM, Ron D'Eau Claire r...@cobi.biz wrote: Of course there are few things as personal as paddles. In that regard, modern CW paddles remind me of personal fountain pens of long, long ago. But, ignoring the subtle nuances of such personal preferences: 1) The KX3 paddles have levers that actually move, rather than the pressure-sensitive stationary paddles of the KX1. 2) Even so, the KX3 paddles are *very* rugged with steel pin bearings rather than tapered pivots with fragile points. You lift the KX3, complete with internal batteries, by the paddle arms without damaging the paddles or disturbing the adjustments. 3) Adjustments to the spacing and travel are made by two small Allen wrenches supplied with the KXPD3 paddles, so if you like to mess with the adjustments a lot, be sure to take them into the field with you. 73, Ron AC7AC -Original Message- I have a KX3 but I did not get the key paddle option. I am thinking of getting one because I may do some portable work where my current paddle of choice is just too much of a hassle. But, I am curious about one thing. Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. Is it better than the KX1 key paddles which I did have and took them off because they just never felt right -- I could not get used to them for some bizarre reason. Thanks. 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Re2:
ARLEN whumm http://ppgem.ct.ufpb.br/channelacidphilipyoung/?egoogleid=rkkgzts __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Re; Elecraft magnetic Hex Key
Hi All, Well, it appears, as usual, I am a day late a dollar short on this item! My thanks to all who have responded. 73 de Jim - KE8G Howard Stephenson hlstephen...@gmail.com wrote: Jim, The Elecraft Hex Key was discontinued about 4 months ago. 73 Howard K6IA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air It's important to understand that the power to run an amp must come from MUCH HEAVIER batteries that must be carried along with the radio. Far better to LEARN how antennas work, learn CW if you don't already know it, and carry the wire and other light weight antenna accessories required to make reliable contacts with stuff you CAN carry. Putting some numbers to it, a 100W Elecraft rig requires 20A to transmit. A 7Ah battery will give you 20 minutes of transmitting time at 100W, but it will give you more than two HOURS at 5W. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] WTB Late Model K3 single receiver and KPA500
Let me know if you want to sell before I order new. Excellent only. Thanks, Jeff K2SDR jkelly at verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
I took an Altoids tin and cut a piece of foam to fit the paddles. I remove the paddles and put them in the tin for transport. Altoids tin weighs next to nothing and the paddles are safe. Buck k4ia K3 # 101 KX3 #715 On 6/30/2013 1:49 PM, Ron D'Eau Claire wrote: Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 40m transmitter alignment: Low Current?
Don, Thanks for the help... turns out my Dummy Load is dead (didn't even think of that). Gonna work on the SSB and KAT modules till I get a new one or get the parts to build one. Then I will continue with the testing. :( Thanks again, Chris KD0FKC -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-40m-transmitter-alignment-Low-Current-tp7576014p7576041.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
The Palm Pico paddle is another option. It is permanently mounted and the paddle arms are tucked away in the sheath (retracted) when not used. Ariel NY4G Sent from my iPad On Jun 30, 2013, at 5:42 PM, Buck k4ia k...@aol.com wrote: I took an Altoids tin and cut a piece of foam to fit the paddles. I remove the paddles and put them in the tin for transport. Altoids tin weighs next to nothing and the paddles are safe. Buck k4ia K3 # 101 KX3 #715 On 6/30/2013 1:49 PM, Ron D'Eau Claire wrote: Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Jim is right in one sense that the 100w amp will consume battery life quickly. However, if what you want is the ability to get a signal out at marginal propagation conditions, then a 50 watt amp if used frugally can get a stronger signal out. Several amps fall into this category with about a 9 dB gain in signal strength from 5 watts - and pulling about 7-10 amps of drain on the battery on TX - Tokyo HiPower HL45B, HFPacker, and Hardrock50. The latter 2 you have to build yourself. The Hardrock is only available used if someone is willing to part with theirs. Only about 100 of the Hardrocks have been built. Sales are on hold pending FCC certification. The Elecraft amp can also be tuned down for less power out and can be tuned to 100w if needed. You do have to carry enough battery to sustain the anticipated TX time. You will be surprised at how effective 5 or 10 watts can be and effort is probably better directed at effective antenna systems. 100w into a dummy load th at radiates (my way of describing a poor antenna) is a poor substitute for 10 watts into a resonant wire. Up high and in the clear is always better. I have always had better luck with wire in the clear than verticals on a picnic table in terms of reach. Ariel NY4G Sent from my iPad On Jun 30, 2013, at 4:18 PM, Jim Brown j...@audiosystemsgroup.com wrote: On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air It's important to understand that the power to run an amp must come from MUCH HEAVIER batteries that must be carried along with the radio. Far better to LEARN how antennas work, learn CW if you don't already know it, and carry the wire and other light weight antenna accessories required to make reliable contacts with stuff you CAN carry. Putting some numbers to it, a 100W Elecraft rig requires 20A to transmit. A 7Ah battery will give you 20 minutes of transmitting time at 100W, but it will give you more than two HOURS at 5W. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KRC2 issues
Don, I stand corrected. I think my frustration with this whole process is showing. Nevertheless, the software/firmware is not all in one place on the website. It's always puzzled me to see firmware located in the Document and Manual Download Page (The KRC Download Program) and the Decoder Configuration Software located in the Software page. Yes, I know there is a link to the former from the latter, but it still isn't logical. And to repeat myself, the screen shot of the downloader software on the website is different from the look of the actual program. I have finally gotten this thing to work after reloading the firmware again. One issue that compounded the problem (and perhaps made me think it wasn't working) is the fact that the band frequency limits differ between using the up/down band switch and the VFO. Since the band definitions aren't documented (AFAIK) for the configuration software, I tried to empirically determine them. For example: if using the band switch, the 20-meter output is active for frequencies between 13000.000 and 14999.999 KHz. However, once active, the VFO can be tuned above 15000 KHz and it will remain active even though a band change relay has changed. Other bands behave similarly. Perhaps this is why the AUXBUS is the recommended method. I have now implemented that method and with some more fussing around have it working. It's interesting (or puzzling) to note that the frequency limits for each band appear to be different (by my measurements) between the RS-232 and AUXBUS configurations. Twenty-meters, for example, maps to 13.000 to 16.99 MHz, far different from the RS-232 mapping. Also six-meters didn't work with the configuration performed with the program even though it dutifully reported v1.6 and showed 6-meters mapping to XV1. The KRC configuration in the K3 menu speaks of tapping the 1 key to change from Band6=B6 to Band6 = B10 and suggesting referring to the KRC Manual for more on this. I find nothing about it in the KRC-2 manual. I had to determine this empirically along with some power cycling to get it working as expected. Another place where reality differs from the documentation is in the K3 manual under CONFIG Menu KRC where it says, Controls the KRC2 band decoder's accessory output settings. Shows ACC OFF or ACC1-3 if a KRC is detected, - - if not. It actually shows ACC OFF or ACC1-6, with ACC3, 4, 5 and 6 all mapping to ACC3. In conclusion, this could be so much simpler with more clarity in the documentation. Wes N7WS --- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote: From: Don Wilhelm w3...@embarqmail.com Subject: Re: [Elecraft] KRC2 issues To: Wes Stewart n...@yahoo.com Cc: elecraft@mailman.qth.net Date: Friday, June 28, 2013, 4:56 PM Wes, That is the KRC2 Configuration Utility which is quite different than the firmware. It is used to alter the band output selections if you wish to. Even though it is beta, it is the ONLY version, and it works - and works quite well. The developer will respond if you have any issues with that beta. I could not discover any non-current firmware or software for the KRC2 that you seem to believe is still there - it just does not show up in my browser. The KRC2 will work on the RS-232 bus, but you must limit the data rate of the K3 to 19200 if the KRC2 is sitting on the RS-232 bus. Actually, the KRC2 does more than just sit on the RS-232 line, it actually relays data on that bus. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
And there's this carrying case that handles the rig and paddle. One still handles the paddle connected to the rig. Has room for a mic too. http://w8fgu.home.comcast.net/~w8fgu/kx3case.html I don't know how it compares in size, cost, etc., to the ones Rose sells. 73, Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Buck k4ia Sent: Sunday, June 30, 2013 2:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Key Paddle Option I took an Altoids tin and cut a piece of foam to fit the paddles. I remove the paddles and put them in the tin for transport. Altoids tin weighs next to nothing and the paddles are safe. Buck k4ia K3 # 101 KX3 #715 On 6/30/2013 1:49 PM, Ron D'Eau Claire wrote: Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator Beacon (or two) . The kind with a built-in GPS. Sure, it's not communications but it's a one-button come get us, we're right here and the Search and Rescue Satellites are quite good. I keep mine in the car. -- Lynn On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which might be less expensive, if it's a one-time trip. 73 de Ray K2ULR KX3 #211 On Jun 30, 2013, at 7:43 PM, Lynn W. Taylor, WB6UUT wrote: I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator Beacon (or two) . The kind with a built-in GPS. Sure, it's not communications but it's a one-button come get us, we're right here and the Search and Rescue Satellites are quite good. I keep mine in the car. -- Lynn On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Mine was about $250 -- a lot less than an amplifier that isn't guaranteed to get someone to send help. On 6/30/2013 4:51 PM, Ray Sills wrote: That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which might be less expensive, if it's a one-time trip. 73 de Ray K2ULR KX3 #211 On Jun 30, 2013, at 7:43 PM, Lynn W. Taylor, WB6UUT wrote: I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator Beacon (or two) . The kind with a built-in GPS. Sure, it's not communications but it's a one-button come get us, we're right here and the Search and Rescue Satellites are quite good. I keep mine in the car. -- Lynn On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G From: raysil...@verizon.net To: elecraft@mailman.qth.net Date: Sun, 30 Jun 2013 19:51:08 -0400 Subject: Re: [Elecraft] KX3 Amp That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which might be less expensive, if it's a one-time trip. 73 de Ray K2ULR KX3 #211 On Jun 30, 2013, at 7:43 PM, Lynn W. Taylor, WB6UUT wrote: I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator Beacon (or two) . The kind with a built-in GPS. Sure, it's not communications but it's a one-button come get us, we're right here and the Search and Rescue Satellites are quite good. I keep mine in the car. -- Lynn On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] looking for iPad software
Seconded. On Jun 29, 2013 4:27 PM, Stephen Prior eastbrantw...@gmail.com wrote: Bill, The Hamlog app: http://pignology.net/hamlog.html can be as simple or as powerful as you like. And if you team it up with a 'pigtail' from Pignology (check out the same website) you can even wirelessly connect to the KX3 to get full transfer of mode, frequency etc., in addition to full rig control if that's what you want. 73 Stephen, G4SJP On 29 June 2013 21:21, bill.va...@gmail.com wrote: I am looking for a basic logging program for the iPad mini that I can use while I am portable. The basic logging program is my real want but I would like to hear of other programs. Yes, I know about the app store but I can't find what I want. Being new to the iPad and the overwhelming offering in the app store makes me wonder if I missed something. Nothing fancy, just the basics. Thanks Bill, VA3OL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Key Paddle Option
I like Rose's case because it can carry quite a bit of stuff. It protects the KX3 quite well. With my new KX3 sideplates and cover - the protection is even better. http://ny4g.blogspot.com/2013/06/new-cover-and-sideplates-for-kx3.html Here is a video of the Palm Pico Paddle http://www.youtube.com/watch?v=cRrv43aQxaE 73, Ariel NY4G From: r...@cobi.biz To: elecraft@mailman.qth.net Date: Sun, 30 Jun 2013 16:09:46 -0700 Subject: Re: [Elecraft] KX3 Key Paddle Option And there's this carrying case that handles the rig and paddle. One still handles the paddle connected to the rig. Has room for a mic too. http://w8fgu.home.comcast.net/~w8fgu/kx3case.html I don't know how it compares in size, cost, etc., to the ones Rose sells. 73, Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Buck k4ia Sent: Sunday, June 30, 2013 2:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Key Paddle Option I took an Altoids tin and cut a piece of foam to fit the paddles. I remove the paddles and put them in the tin for transport. Altoids tin weighs next to nothing and the paddles are safe. Buck k4ia K3 # 101 KX3 #715 On 6/30/2013 1:49 PM, Ron D'Eau Claire wrote: Is the key paddle rugged enough that carrying the KX3 in a backpack or other carrying bag would not break it or damage or alter keying action. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Walter Underwood wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Spot PLB (Re: KX3 Amp)
REI, or http://findmespot.com On Jun 30, 2013 8:32 PM, Ariel Jacala n...@hotmail.com wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KRC2 issues
Wes, Thank you, but I am going to have to see if Jack Brindle chimes in on this one to answer your remaining questions. I am quite familiar with the KRC2 behavior with the K2, but not so much on its behavior with the K3. I am glad to hear that you have it working even after having some frustration. 73, Don W3FPR On 6/30/2013 7:08 PM, Wes Stewart wrote: Don, I stand corrected. I think my frustration with this whole process is showing. Nevertheless, the software/firmware is not all in one place on the website. It's always puzzled me to see firmware located in the Document and Manual Download Page (The KRC Download Program) and the Decoder Configuration Software located in the Software page. Yes, I know there is a link to the former from the latter, but it still isn't logical. And to repeat myself, the screen shot of the downloader software on the website is different from the look of the actual program. I have finally gotten this thing to work after reloading the firmware again. One issue that compounded the problem (and perhaps made me think it wasn't working) is the fact that the band frequency limits differ between using the up/down band switch and the VFO. Since the band definitions aren't documented (AFAIK) for the configuration software, I tried to empirically determine them. For example: if using the band switch, the 20-meter output is active for frequencies between 13000.000 and 14999.999 KHz. However, once active, the VFO can be tuned above 15000 KHz and it will remain active even though a band change relay has changed. Other bands behave similarly. Perhaps this is why the AUXBUS is the recommended method. I have now implemented that method and with some more fussing around have it working. It's interesting (or puzzling) to note that the frequency limits for each band appear to be different (by my measurements) between the RS-232 and AUXBUS configurations. Twenty-meters, for example, maps to 13.000 to 16.99 MHz, far different from the RS-232 mapping. Also six-meters didn't work with the configuration performed with the program even though it dutifully reported v1.6 and showed 6-meters mapping to XV1. The KRC configuration in the K3 menu speaks of tapping the 1 key to change from Band6=B6 to Band6 = B10 and suggesting referring to the KRC Manual for more on this. I find nothing about it in the KRC-2 manual. I had to determine this empirically along with some power cycling to get it working as expected. Another place where reality differs from the documentation is in the K3 manual under CONFIG Menu KRC where it says, Controls the KRC2 band decoder's accessory output settings. Shows ACC OFF or ACC1-3 if a KRC is detected, - - if not. It actually shows ACC OFF or ACC1-6, with ACC3, 4, 5 and 6 all mapping to ACC3. In conclusion, this could be so much simpler with more clarity in the documentation. Wes N7WS --- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote: From: Don Wilhelm w3...@embarqmail.com Subject: Re: [Elecraft] KRC2 issues To: Wes Stewart n...@yahoo.com Cc: elecraft@mailman.qth.net Date: Friday, June 28, 2013, 4:56 PM Wes, That is the KRC2 Configuration Utility which is quite different than the firmware. It is used to alter the band output selections if you wish to. Even though it is beta, it is the ONLY version, and it works - and works quite well. The developer will respond if you have any issues with that beta. I could not discover any non-current firmware or software for the KRC2 that you seem to believe is still there - it just does not show up in my browser. The KRC2 will work on the RS-232 bus, but you must limit the data rate of the K3 to 19200 if the KRC2 is sitting on the RS-232 bus. Actually, the KRC2 does more than just sit on the RS-232 line, it actually relays data on that bus. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
I like Walter's paper and risk management approach and also with the philosophy of needing 2 way communication to manage logistics. Personally, IMHO, the Satelite phone rental is probably the most effective way. I personally don't travel more than 10 miles from the trail head so I have gotten by with HT/GPS/APRS and a small HF rig. I also carry a standalone GPS for trail maneuvering. A coiled up twin lead J-pole is quite effective and can be configured for 2m or 11 meters. When I was on Pisgah Mt in NC, I had no problem hitting the repeater on Caesars Head in SC, which gave me an effective range of 100 mile radius with that J pole strung up on a tree and the TX on the HT at 5w. Preparation and redundancy is key - even backups for backups. He who does not have a backup plan better be really lucky. Waiting patiently for the Elecraft 2m module. Ariel NY4G From: wun...@wunderwood.org Date: Sun, 30 Jun 2013 17:41:59 -0700 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Walter Underwood wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
PLBs actually aren't legal for sinking ships (or crashing airplanes), there is a different category of device for that. Personal Locator Beacons are meant to do one simple task: summon help in an emergency. Calling someone to tell them you're at a different trailhead is not an emergency. If I'm off in the backcountry, I'd suggest that a medical emergency and risk of being overrun by a wildfire aren't that different. If you want to report a wildfire that isn't threatening you, that isn't an emergency, and if it takes you a bit to get an antenna up, and find someone to relay a message, then by all means pull out your KX3 and a random bit of wire and tell someone. A satphone (according to your post) is about $120 for a given outing. A PLB is about $250 for five to seven years. It's good to have more than one tool in your toolbox. -- Lynn On 6/30/2013 5:41 PM, Walter Underwood wrote: There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Walter Underwood wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Or .maybe he's trying to justify the purchase of an amp to his Financial Control Officer. ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Lynn W. Taylor, WB6UUT k...@coldrockshotbrooms.com wrote: Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Fine, PLBs are for personal maritime emergencies and EPIRBs are for sinking ships. Either one will get a rescue. The story about the wildfire is here: http://wunderwood.org/most_casual_observer/2009/08/fighting_a_wildfire_with_milk.html In the Sierras in August, any wildfire is serious, even a single-tree fire like we fought. I'm fine with taking some time to get an antenna up. I'm talking about what you decide to put in your pack at the trailhead. Since you didn't read the blog post, I'll repeat it. My preference is to avoid rescue situations. Reliable communications can help me do that. Once you are in a rescue situation, activate the beacon and pray. wunder K6WRU On Jun 30, 2013, at 6:05 PM, Lynn W. Taylor, WB6UUT wrote: PLBs actually aren't legal for sinking ships (or crashing airplanes), there is a different category of device for that. Personal Locator Beacons are meant to do one simple task: summon help in an emergency. Calling someone to tell them you're at a different trailhead is not an emergency. If I'm off in the backcountry, I'd suggest that a medical emergency and risk of being overrun by a wildfire aren't that different. If you want to report a wildfire that isn't threatening you, that isn't an emergency, and if it takes you a bit to get an antenna up, and find someone to relay a message, then by all means pull out your KX3 and a random bit of wire and tell someone. A satphone (according to your post) is about $120 for a given outing. A PLB is about $250 for five to seven years. It's good to have more than one tool in your toolbox. -- Lynn On 6/30/2013 5:41 PM, Walter Underwood wrote: There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This
Re: [Elecraft] KX3 Amp
For Maritime you want an EPIRB (Emergency Position Indicating Radio Beacon). Contacts the emergency network via satellite with the vessel's identification and location and then provides a 400 MHz beacon for rescuers to RDF right to you. They activate automatically when coming in contact with salt water in case no one has time to activate it in an emergency. I'm surprised that the news reports about the sailboat missing between New Zealand and Australia has not mentioned one. They've been standard for over 20 years. A blue water sailor without one is as bizarre as not having a life jacket on board. I will use 100 watts for emergency communications (on land) wherever I have a motor vehicle to power the rig. Otherwise, after 60+ years on the air, I cannot imagine a scenario where an SOS on CW or MAYDAY on SSB won't bring up a reply on some band at any hour of the day running 5 or 10 watts. Indeed, the big issue is getting a response from halfway around the world when one wants a call to local emergency services! 73 Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lynn W. Taylor, WB6UUT Sent: Sunday, June 30, 2013 6:06 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp PLBs actually aren't legal for sinking ships (or crashing airplanes), there is a different category of device for that. Personal Locator Beacons are meant to do one simple task: summon help in an emergency. Calling someone to tell them you're at a different trailhead is not an emergency. If I'm off in the backcountry, I'd suggest that a medical emergency and risk of being overrun by a wildfire aren't that different. If you want to report a wildfire that isn't threatening you, that isn't an emergency, and if it takes you a bit to get an antenna up, and find someone to relay a message, then by all means pull out your KX3 and a random bit of wire and tell someone. A satphone (according to your post) is about $120 for a given outing. A PLB is about $250 for five to seven years. It's good to have more than one tool in your toolbox. -- Lynn __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
I read the blog post. That's where I found (your) satphone pricing, and your comment about calling to be picked up at a different trailhead. Your blog post does not address the original post -- he wants a 100 watt amp for reliable emergency communications from his home located 200 miles from civilization. Different requirements, different answers. Often, more than one correct answer. -- Lynn On 6/30/2013 6:40 PM, Walter Underwood wrote: Fine, PLBs are for personal maritime emergencies and EPIRBs are for sinking ships. Either one will get a rescue. The story about the wildfire is here: http://wunderwood.org/most_casual_observer/2009/08/fighting_a_wildfire_with_milk.html In the Sierras in August, any wildfire is serious, even a single-tree fire like we fought. I'm fine with taking some time to get an antenna up. I'm talking about what you decide to put in your pack at the trailhead. Since you didn't read the blog post, I'll repeat it. My preference is to avoid rescue situations. Reliable communications can help me do that. Once you are in a rescue situation, activate the beacon and pray. wunder K6WRU On Jun 30, 2013, at 6:05 PM, Lynn W. Taylor, WB6UUT wrote: PLBs actually aren't legal for sinking ships (or crashing airplanes), there is a different category of device for that. Personal Locator Beacons are meant to do one simple task: summon help in an emergency. Calling someone to tell them you're at a different trailhead is not an emergency. If I'm off in the backcountry, I'd suggest that a medical emergency and risk of being overrun by a wildfire aren't that different. If you want to report a wildfire that isn't threatening you, that isn't an emergency, and if it takes you a bit to get an antenna up, and find someone to relay a message, then by all means pull out your KX3 and a random bit of wire and tell someone. A satphone (according to your post) is about $120 for a given outing. A PLB is about $250 for five to seven years. It's good to have more than one tool in your toolbox. -- Lynn On 6/30/2013 5:41 PM, Walter Underwood wrote: There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: k...@coldrockshotbrooms.com To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account. I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:
Re: [Elecraft] KX3 Amp
I have a Delorme GPS and SPOT PLB butlimited to text messaging IF it can connect. I'd rather avoid emergencies too and good comm's are a huge help, ..cross river here not there , ..unfriendles spotted near x , Erdu at point Y ,meet Joe at point x... , then able to talk with Joe as we approach , etc.. Nothing lke real time phone to keep a trip safe and productive. 2M would be nice but we have seceral small HT's for that. So , rather than discuss why I could use anything else..does anyone know of a good portable amp for the KX3 ? Amplifier advice greatly appreciated. Thanks BillLynn W. Taylor, WB6UUT [via Elecraft] ml-node+s365791n757605...@n2.nabble.com wrote:I read the blog post. That's where I found (your) satphone pricing, and your comment about calling to be picked up at a different trailhead. Your blog post does not address the original post -- he wants a 100 watt amp for reliable emergency communications from his home located 200 miles from civilization. Different requirements, different answers. Often, more than one correct answer. -- Lynn On 6/30/2013 6:40 PM, Walter Underwood wrote: Fine, PLBs are for personal maritime emergencies and EPIRBs are for sinking ships. Either one will get a rescue. The story about the wildfire is here: http://wunderwood.org/most_casual_observer/2009/08/fighting_a_wildfire_with_milk.html In the Sierras in August, any wildfire is serious, even a single-tree fire like we fought. I'm fine with taking some time to get an antenna up. I'm talking about what you decide to put in your pack at the trailhead. Since you didn't read the blog post, I'll repeat it. My preference is to avoid rescue situations. Reliable communications can help me do that. Once you are in a rescue situation, activate the beacon and pray. wunder K6WRU On Jun 30, 2013, at 6:05 PM, Lynn W. Taylor, WB6UUT wrote: PLBs actually aren't legal for sinking ships (or crashing airplanes), there is a different category of device for that. Personal Locator Beacons are meant to do one simple task: summon help in an emergency. Calling someone to tell them you're at a different trailhead is not an emergency. If I'm off in the backcountry, I'd suggest that a medical emergency and risk of being overrun by a wildfire aren't that different. If you want to report a wildfire that isn't threatening you, that isn't an emergency, and if it takes you a bit to get an antenna up, and find someone to relay a message, then by all means pull out your KX3 and a random bit of wire and tell someone. A satphone (according to your post) is about $120 for a given outing. A PLB is about $250 for five to seven years. It's good to have more than one tool in your toolbox. -- Lynn On 6/30/2013 5:41 PM, Walter Underwood wrote: There are a lot of emergency situations that benefit from two-way communication. PLBs are great for sinking ships, but not so good for distinguishing between a wildfire and a medical emergency. I've dealt with a few emergencies in the backcountry. On one trip, we had both a wildfire and two medical situations. You can draw your own conclusions about heading into the backcountry with me. :-) Hey, I wrote a long blog post about that: http://wunderwood.org/most_casual_observer/2011/10/emergency_communication_in_the.html wunder K6WRU On Jun 30, 2013, at 5:32 PM, Ariel Jacala wrote: Well, in that framework - I would have to agree that the PLB is better . How do I get one :-) Ariel NY4G Date: Sun, 30 Jun 2013 17:24:45 -0700 From: [hidden email] To: [hidden email] Subject: Re: [Elecraft] KX3 Amp Yes, but. The original poster is going to be 200 miles from town. He may or may not be in VHF range of something when he needs help. I'm pretty sure he's out of range or he'd just get a couple of handhelds and call it done. The Personal Locator Beacon frequency is monitored by two sets of satellites -- a constellation of low-earth-orbit satellites that can determine location, and a few geostationary satellites that see a wide area of the planet, looking straight down at the surface of the earth. The latter can read the GPS on the PLB. The signal goes straight to search and rescue folks, and the beacons are registered so they know exactly who they're going to be looking for. Which would you prefer: push a button and it's done, or calling on several bands and hoping one is open? Again, I love amateur radio, and I would consider it part of my emergency toolkit, but I'd trigger my PLB first in a real emergency. -- Lynn On 6/30/2013 5:09 PM, Ariel Jacala wrote: Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS
Re: [Elecraft] KX3 Amp
While all these posts have good advice for a bc trip , I really just want the KX3 amplifier. I have the other items already ( Delorme GPS plus SPOT with rescue insurance paid up, sat. phone rented , several 2M HT's ( APRS godd idea , I'll add that ) and the usual flares , panels , noisemakers and things that go bang ) . But...I need an amplifier and the right antennas to add to this. We will be doing the check in via SPOT , sat. AND am. band. SPOT loses lock in jungle and mountain ,vso do sat. phones and GPS. Certain unfriendlies like to jam their freq's as well. In addition to that any or all that gear can be broken , lost or confiscated by certain sticky fingered locals ( it.s happened ). Hard to jam 6M-160M all the time though. I am not shouting in the dark for rescue. We have several pre-planned operators standing by with preplanned times and frequencies and backup frequencies. But, they are also mobile or may have interference so I want the best chance at a clear signal both ways. There are no repeaters out there. This is in Africa. Please , any KX3 amplifier advice ? Ten-Tec , Hardrock , etc. , which specific models with setup/operating tips ? Greatly appreciated ! Billny4g [via Elecraft] ml-node+s365791n7576048...@n2.nabble.com wrote:Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account. I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G From: [hidden email] To: [hidden email] Date: Sun, 30 Jun 2013 19:51:08 -0400 Subject: Re: [Elecraft] KX3 Amp That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which might be less expensive, if it's a one-time trip. 73 de Ray K2ULR KX3 #211 On Jun 30, 2013, at 7:43 PM, Lynn W. Taylor, WB6UUT wrote: I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator Beacon (or two) . The kind with a built-in GPS. Sure, it's not communications but it's a one-button come get us, we're right here and the Search and Rescue Satellites are quite good. I keep mine in the car. -- Lynn On 6/30/2013 4:42 AM, KF5TEU wrote: Unfortunately , yes , I do need an amp. . We are going out over 200 mi. from the nearest real town and if we need help then I would really love to get through vs. be falsely proud of my QST skills that gets me nothing but dead air while we hike back with no medical or rescue personnel knowing we are in trouble. So , does anyone have a good amp. suggestion with experience ?Thanks in advance. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576020.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will
Re: [Elecraft] KX3 Amp
I appreciate the low power is better for longer advice but..this is for that crucial 5 min. of comm. when low power just doesn't work. We have several 13500 MaH/5A power packs that combine for 20 plus amps and weigh about 1lb. each. We also have the vehicle batteries , aircraft batteries and 2 field solar 1KW ( I think, not mine ) chargers with built in Li,ion batteries. I hope it's just 5 min. at 5W 3 times a day for 4 weeks but...JIC , the 10db could be a real life saver. So , I have the PLB , the sat. phone and the GPS. Does anyone have KX3 amp. advice m Greatly appreciated. BillJim Brown-10 [via Elecraft] ml-node+s365791n7576038...@n2.nabble.com wrote: -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Amp-tp7571696p7576061.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft SSB net results for 6/30/13
We were ready today to make use of several relay stations, and very poor propagation made that a good idea. The net was a bit of a struggle getting everybody pulled in. My apologies to any that we missed. Hopefully conditions will be better next week. We had 24 stations over a 24 minute period. Participants from the 6/30/13 net follow: Station NameQTH Rig S/N KM4IK Ian GA K3 281 NZ0TBillKS K3 1502 K2SDScott NC K3 6286 K8AJS JohnOH K3 7299 WB9JNZ EricIL K3 4017 K5RHD Randy CO KX3 1383 WO1IDickMA K3 911 WW4JF JohnTN K3 6185 KC5RY George TX K3 5208 KE7HGE Ken WA KX3 4540 W4PFM PaulVA K3 1673 K6CG/VE1DickNS KX3 3328 W8OVDaveTX K3 3139 WV5IDwayne TX K3 5287 K7GED Geddes ID KX3 4218 W4RKS Jim AL K3 3618 K7BRR BillAZ K3 5545 K0DTJ Brian CA K3 4413 VA6RX Terry AB K3 5567 W0FMTerry MO K3 474 KA6GMA GlenCA K3 7522 W7LKG RickWA K3 4497 KJ6CBS DaveCA K3 4052 NS7PPhilOR K3 1826 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
Hands down the KXPA100. It isn't out yet - shipping in August but offers the greatest flexibility with a tuner and portability. The Hardrock is ~$260. It is only available to members of the Yahoo group right now. It is 160-6m and generates a solid 50w from 160-10, less on 6m. I own a Hardrock and it was a difficult build but Jim Veatch helped me out a lot - WA2EUJ. No tuner though so you will have to invest in a ZL100 or equivalent. The Elecraft tuner is faster and tunes a wider range. Size wise is only slightly smaller than the Elecraft 4 1/8 wide and tall by 7 deep. The TenTec is a larger amp - $800 plus a 100w tuner. The THP HL45B is a solid performer at about $450 from HRO. Again you need an outboard tuner. You have to manually switch bands. If you don't it will go on standby - a self protective feature. I played with a THP for a while and it works well. You can get one used - not easy - for about $250-$300. There are the RM Italy variants - beware do no t overdrive - IMD artifacts - HL300B is the model - only drive to 100W - I have no experience with this amp. These are not certified by the FCC. Some people have had great luck with the Juma 100w amp and some on the reflector may have owned one or built one. The Jumas can be programmed to band switch with the rig. Again - it needs an external 100w tuner. So here are your choices: Juma 100w - no tuner - band switches with rig automatic - FCC certified Hardrock 50w - no tuner - manual switching - not FCC certified TenTec - 100w - no tuner - band switching with rig automatic HFPacker - 50w - manual swiching KXPA100 - 100w - tuner - automatic band switching - FCC certified THP HL45B - 45w - no tuner - manual switching (except for FT817) - FCC certified THP HL100B - 10w - no tuner - manual switching - not FCC certified RM Italy HL150 - 150w - no tuner - manual switching? not FCC certified RM Italy HL300B = 300w - no tuner - manual switching? not FCC cerified Antennas Too many to list Personal favorites - G0GSF- multiband dipole - 4 bands are OK w/o a tuner, EFHW - cut to 45 ft with EARCI matchbox KX3 tuner will match 80-10m Ariel NY4G Sent from my iPad On Jun 30, 2013, at 11:39 PM, KF5TEU bha...@flexbrite.com wrote: While all these posts have good advice for a bc trip , I really just want the KX3 amplifier. I have the other items already ( Delorme GPS plus SPOT with rescue insurance paid up, sat. phone rented , several 2M HT's ( APRS godd idea , I'll add that ) and the usual flares , panels , noisemakers and things that go bang ) . But...I need an amplifier and the right antennas to add to this. We will be doing the check in via SPOT , sat. AND am. band. SPOT loses lock in jungle and mountain ,vso do sat. phones and GPS. Certain unfriendlies like to jam their freq's as well. In addition to that any or all that gear can be broken , lost or confiscated by certain sticky fingered locals ( it.s happened ). Hard to jam 6M-160M all the time though. I am not shouting in the dark for rescue. We have several pre-planned operators standing by with preplanned times and frequencies and backup frequencies. But, they are also mobile or may have interference so I want the best chance at a clear signal both ways. There are no repeaters out there. This is in Africa. Please , any KX3 amplifier advice ? Ten-Tec , Hardrock , etc. , which specific models with setup/operating tips ? Greatly appreciated ! Billny4g [via Elecraft] ml-node+s365791n7576048...@n2.nabble.com wrote:Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G From: [hidden email] To: [hidden email] Date: Sun, 30 Jun 2013 19:51:08 -0400 Subject: Re: [Elecraft] KX3 Amp That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which might be less expensive, if it's a one-time trip. 73 de Ray K2ULR KX3 #211 On Jun 30, 2013, at 7:43 PM, Lynn W. Taylor, WB6UUT wrote: I love amateur radio. However, if I was living 200 miles from the nearest real town, I'd invest in a good Personal Locator
Re: [Elecraft] KX3 Amp
One other choice and this is probably not widely known but the THP HL450B will put out about 200W driven at 12W from the KX3. I ran one with my KX3 before I sold the KX3. It is a pricey amp. I think someone quoted it as the highest $ per watt but it does work real nicely. Needs large 13.8 VDC source rated at 60 amps at full 400W output. Good luck! Keith AK6ZZ Sent from my iPhone please excuse typos On Jun 30, 2013, at 9:19 PM, Ariel Jacala n...@hotmail.com wrote: Hands down the KXPA100. It isn't out yet - shipping in August but offers the greatest flexibility with a tuner and portability. The Hardrock is ~$260. It is only available to members of the Yahoo group right now. It is 160-6m and generates a solid 50w from 160-10, less on 6m. I own a Hardrock and it was a difficult build but Jim Veatch helped me out a lot - WA2EUJ. No tuner though so you will have to invest in a ZL100 or equivalent. The Elecraft tuner is faster and tunes a wider range. Size wise is only slightly smaller than the Elecraft 4 1/8 wide and tall by 7 deep. The TenTec is a larger amp - $800 plus a 100w tuner. The THP HL45B is a solid performer at about $450 from HRO. Again you need an outboard tuner. You have to manually switch bands. If you don't it will go on standby - a self protective feature. I played with a THP for a while and it works well. You can get one used - not easy - for about $250-$300. There are the RM Italy variants - beware do no t overdrive - IMD artifacts - HL300B is the model - only drive to 100W - I have no experience with this amp. These are not certified by the FCC. Some people have had great luck with the Juma 100w amp and some on the reflector may have owned one or built one. The Jumas can be programmed to band switch with the rig. Again - it needs an external 100w tuner. So here are your choices: Juma 100w - no tuner - band switches with rig automatic - FCC certified Hardrock 50w - no tuner - manual switching - not FCC certified TenTec - 100w - no tuner - band switching with rig automatic HFPacker - 50w - manual swiching KXPA100 - 100w - tuner - automatic band switching - FCC certified THP HL45B - 45w - no tuner - manual switching (except for FT817) - FCC certified THP HL100B - 10w - no tuner - manual switching - not FCC certified RM Italy HL150 - 150w - no tuner - manual switching? not FCC certified RM Italy HL300B = 300w - no tuner - manual switching? not FCC cerified Antennas Too many to list Personal favorites - G0GSF- multiband dipole - 4 bands are OK w/o a tuner, EFHW - cut to 45 ft with EARCI matchbox KX3 tuner will match 80-10m Ariel NY4G Sent from my iPad On Jun 30, 2013, at 11:39 PM, KF5TEU bha...@flexbrite.com wrote: While all these posts have good advice for a bc trip , I really just want the KX3 amplifier. I have the other items already ( Delorme GPS plus SPOT with rescue insurance paid up, sat. phone rented , several 2M HT's ( APRS godd idea , I'll add that ) and the usual flares , panels , noisemakers and things that go bang ) . But...I need an amplifier and the right antennas to add to this. We will be doing the check in via SPOT , sat. AND am. band. SPOT loses lock in jungle and mountain ,vso do sat. phones and GPS. Certain unfriendlies like to jam their freq's as well. In addition to that any or all that gear can be broken , lost or confiscated by certain sticky fingered locals ( it.s happened ). Hard to jam 6M-160M all the time though. I am not shouting in the dark for rescue. We have several pre-planned operators standing by with preplanned times and frequencies and backup frequencies. But, they are also mobile or may have interference so I want the best chance at a clear signal both ways. There are no repeaters out there. This is in Africa. Please , any KX3 amplifier advice ? Ten-Tec , Hardrock , etc. , which specific models with setup/operating tips ? Greatly appreciated ! Billny4g [via Elecraft] ml-node+s365791n7576048...@n2.nabble.com wrote:Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G From: [hidden email] To: [hidden email] Date: Sun, 30 Jun 2013 19:51:08 -0400
Re: [Elecraft] KX3 Amp
Hmm, reading all this and wondering (wanting) more clarification of what is meant by We are going out over 200 mi. from the nearest real town That would describe 75% or maybe 90% of Alaska. If this is a short-term camping trip or vacation it will be a bit different from living full-time (Off the grid). I know a little bit about both situations (serious backpacker in the Sierras in the 1970's; lived totally off the grid for ten years in near bush Alaska. I did have a dirt road but no electricity, phone, running water, etc. Three years of that I lived in a 8x10 foot wall tent. But I had a 1700w gas generator, 100AH marine battery, HF and 2m radios, battery TV and car stereo. I was 25 air miles (and 90 road miles) from a large city. I used my 2m radio to access a repeater with a phone patch or walked to a neighbor that had telephone. Nearest ambulance service was 50 two-lane mountain road miles away (took 1-hour response time after contact). Fire dept was also that far away. GPS had not been invented, yet. Marine rescue was via VHF channel-21. Loran-C was the standard navigation tool. Today, I would probably consider having both ham radio and an alternative (just in case). What I got would depend if this is a short trip or living full-time. People in bush AK often have satellite internet and TV, and/or sat-phone. The old days in AK HF ham radio was a major communication link (for everything). When living out in the bush one develops good neighbors and a lot of self-sufficiency (and being very careful). I lived alone so no one would likely come looking for a couple weeks or more. This is more so if a backcountry traveler. 73, Ed - KL7UW http://www.kl7uw.com dubus...@gmail.com Kits made by KL7UW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KRC2 issues
I would like to supplement the KRC2 Configuration Utility with command links to programs of my own. Although commands for the K2, K3, P3 etc are well documented, I can find nothing for the KRC2. Are these available, or must I do some reverse engineering ? 73 Stewart G3RXQ On Fri, 28 Jun 2013 18:56:48 -0400, Don Wilhelm wrote: Wes, That is the KRC2 Configuration Utility which is quite different than the firmware. It is used to alter the band output selections if you wish to. Even though it is beta, it is the ONLY version, and it works - and works quite well. The developer will respond if you have any issues with that beta. I could not discover any non-current firmware or software for the KRC2 that you seem to believe is still there - it just does not show up in my browser. The KRC2 will work on the RS-232 bus, but you must limit the data rate of the K3 to 19200 if the KRC2 is sitting on the RS-232 bus. Actually, the KRC2 does more than just sit on the RS-232 line, it actually relays data on that bus. 73, Don W3FPR On 6/28/2013 6:16 PM, Wes Stewart wrote: Don, That's one of the problems I'm exposing. The Elecraft website is a mess. http://www.elecraft.com/software/KRC2/elecraft_KRC2_Config_software.htm They need to take a broom to the site and get rid of the detritus and only show what is currently supported and actually works. As I stated, I know the preferred method is using the aux bus, but if it's advertised that it can sit on the RS-232 bus then it should work there. If not, remove all references to RS-232, other than firmware installation. Wes --- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote: From: Don Wilhelm w3...@embarqmail.com Subject: Re: [Elecraft] KRC2 issues To: Wes Stewart n...@yahoo.com Cc: elecraft@mailman.qth.net Date: Friday, June 28, 2013, 3:43 PM Wes, I just checked the Elecraft website, and see only 3 files for the KRC2 - KRC2 Download Program, KRC2 Firmware V1.6 and KRC2ACC Firmware V1.6. No older levels and no beta. The F buttons behave differently in the KRC2ACC firmware, so if you want band selection via those buttons as indicated in the KRC2 manual (not the KRC2ACC manual) you should load the KRC2 Firmware. What baud rate is your K3 set to. The maximum rate for the KRC2 is 19200, and the K3 must be set accordingly. The KRC2 behaves better as a band decoder if you connect it to the AUXBUS on the ACC connector and frees your K3 RS-232 to be used at the 38400 rate. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Amp
One correction. The HF Packer is not a 50w amp. It's about 45w at 160m, and then steadily less as you go up in frequency (40w for 80m, 35w for 40-20m, 30w for 17/15m, 25w for 12m and about 20w for 10m). It doesn't support 6m. These numbers come directly from a graph in the HF Packer manual. John AC0ZG On 6/30/2013 10:18 PM, Ariel Jacala wrote: Hands down the KXPA100. It isn't out yet - shipping in August but offers the greatest flexibility with a tuner and portability. The Hardrock is ~$260. It is only available to members of the Yahoo group right now. It is 160-6m and generates a solid 50w from 160-10, less on 6m. I own a Hardrock and it was a difficult build but Jim Veatch helped me out a lot - WA2EUJ. No tuner though so you will have to invest in a ZL100 or equivalent. The Elecraft tuner is faster and tunes a wider range. Size wise is only slightly smaller than the Elecraft 4 1/8 wide and tall by 7 deep. The TenTec is a larger amp - $800 plus a 100w tuner. The THP HL45B is a solid performer at about $450 from HRO. Again you need an outboard tuner. You have to manually switch bands. If you don't it will go on standby - a self protective feature. I played with a THP for a while and it works well. You can get one used - not easy - for about $250-$300. There are the RM Italy variants - beware do no t overdrive - IMD artifacts - HL300B is the model - only drive to 100W - I have no experience with this amp. These are not certified by the FCC. Some people have had great luck with the Juma 100w amp and some on the reflector may have owned one or built one. The Jumas can be programmed to band switch with the rig. Again - it needs an external 100w tuner. So here are your choices: Juma 100w - no tuner - band switches with rig automatic - FCC certified Hardrock 50w - no tuner - manual switching - not FCC certified TenTec - 100w - no tuner - band switching with rig automatic HFPacker - 50w - manual swiching KXPA100 - 100w - tuner - automatic band switching - FCC certified THP HL45B - 45w - no tuner - manual switching (except for FT817) - FCC certified THP HL100B - 10w - no tuner - manual switching - not FCC certified RM Italy HL150 - 150w - no tuner - manual switching? not FCC certified RM Italy HL300B = 300w - no tuner - manual switching? not FCC cerified Antennas Too many to list Personal favorites - G0GSF- multiband dipole - 4 bands are OK w/o a tuner, EFHW - cut to 45 ft with EARCI matchbox KX3 tuner will match 80-10m Ariel NY4G Sent from my iPad On Jun 30, 2013, at 11:39 PM, KF5TEU bha...@flexbrite.com wrote: While all these posts have good advice for a bc trip , I really just want the KX3 amplifier. I have the other items already ( Delorme GPS plus SPOT with rescue insurance paid up, sat. phone rented , several 2M HT's ( APRS godd idea , I'll add that ) and the usual flares , panels , noisemakers and things that go bang ) . But...I need an amplifier and the right antennas to add to this. We will be doing the check in via SPOT , sat. AND am. band. SPOT loses lock in jungle and mountain ,vso do sat. phones and GPS. Certain unfriendlies like to jam their freq's as well. In addition to that any or all that gear can be broken , lost or confiscated by certain sticky fingered locals ( it.s happened ). Hard to jam 6M-160M all the time though. I am not shouting in the dark for rescue. We have several pre-planned operators standing by with preplanned times and frequencies and backup frequencies. But, they are also mobile or may have interference so I want the best chance at a clear signal both ways. There are no repeaters out there. This is in Africa. Please , any KX3 amplifier advice ? Ten-Tec , Hardrock , etc. , which specific models with setup/operating tips ? Greatly appreciated ! Billny4g [via Elecraft] ml-node+s365791n7576048...@n2.nabble.com wrote:Some HT's have GPS and with APRS one can send messages. I have used it on hikes so my wife can track me on the internet as I hike. The HT sends a beacon signal out and the movement can be tracked through APRS.fi Any Ham can get an APRS account.I have even used APRS on my iPhone for the same tracking capability. Remote from civilization though you would need an HT with APRS like the VX8R by Yaesu or a TinyTrack tracker. With the HT however, you can call for help and the reach can be substantial depending on elevation or having a nearby repeater. Having worked 45 states on Field Day just using a KX3 and a G0GSF dipole, I have no qualms with getting out and reaching people with a KX3 on HF. When the 2m module gets out - I have a complete package for all modes of remote operation. Ariel NY4G From: [hidden email] To: [hidden email] Date: Sun, 30 Jun 2013 19:51:08 -0400 Subject: Re: [Elecraft] KX3 Amp That's what I'd do as well. Some personal locators will send an I'm OK message, too to designated recipients. And, if you don't want to buy a personal locator... you can rent them, which
