Re: Have suggestions for a "roll your own file server"?
> data in your house. If your disks are big enough you could share systems > and disks. > > > > > > Use encryption as you wish. > > > > > > Disk failure? Replace the disk and the data will be replicated. > > > Fire, theft, earthquake? Take the replaced system over to your > friends/relatives and copy the data at high speed, then take the copied > system back to your house and start using it again. > > > > > > You would need three disks to fail at relatively the same time to lose > your data. Or an asteroid crashing that wipes out all life on the > planet. Unlikely. > > > > > > Realize that nothing is forever. > > > > > > md > > >> On 03/08/2021 7:33 PM Bruce Labitt wrote: > > >> > > >> > > >> For the second time in 3 months I have had a computer failure. > Oddly, it was a PS on the motherboard both times. (Two different MB's.) > Fortunately the disks were ok. I'm living on borrowed time. Next time, I > may not be that lucky. > > >> > > >> Need a file server system with some sort of RAID redundancy. I want > to backup 2 main computers, plus photos. Maybe this RPI4 too, since that's > what I'm running on, due to the second failure. If this SSD goes, I'm > gonna be a sad puppy. This is for home use, so we are not talking > Exabytes. I'm thinking about 2-4TB of RAID. Unless of course, RAID is > obsolete these days. Honestly, I find some of the levels of RAID > confusing. I want something that will survive a disk > > >> failure (or two) out of the array. Have any ideas, or can you point > me to some place that discusses this somewhat intelligently? > > >> > > >> Are there reasonable systems that one can put together oneself these > days? Can I repurpose an older PC for this purpose? Or an RPI4? What are > the gotchas of going this way? > > >> > > >> I want to be able to set up a daily rsync or equivalent so we will > lose as little as possible. At the moment, I'm not thinking about > surviving fire or disaster. Maybe I should, but I suspect the costs > balloon considerably. I do not want to backup to the cloud because, plain > and simple, I don't trust it to be fully secure. > > > > -- > > Connect with me on the GNU social network! < > https://status.hackerposse.com/rozzin> > > Not on the network? Ask me for more info! > > ___ > > gnhlug-discuss mailing list > > gnhlug-discuss@mail.gnhlug.org > > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ > > ___ > gnhlug-discuss mailing list > gnhlug-discuss@mail.gnhlug.org > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ > -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Reminder/RSVP -- meet *this Thursday* for chat & beer.
I'll be there too. And as a Red Hatter ;-) -marc On Wed, Feb 19, 2020 at 3:36 PM Tom Buskey wrote: > Wish I could be there. I remember driving to UNH, Martha's and a few > others to go to meetings. > > Now I'm at Red Hat and a "free" open source OS is now a critical part of > running the NYSE and many large organizations. > > On Wed, Feb 19, 2020 at 8:45 AM Andrew C wrote: > >> I'll be there, >> >> Thanks, >> Andrew >> >> On Wed, Feb 19, 2020, 8:37 AM Paul Beaudet wrote: >> >>> I'll be there, >>> >>> Let me know know if you need any help with the hand trucks Maddog >>> >>> On Tue, Feb 18, 2020 at 9:57 PM Mark E. Mallett wrote: >>> >>>> On Tue, Feb 18, 2020 at 03:17:36PM -0500, Ken D'Ambrosio wrote: >>>> > Hey, all! Just a reminder that we're going to get together at >>>> Martha's >>>> > Exchange this Thursday at 6:00. Nothing formal, though Maddog has >>>> > threatened to bring a PiDP-11. (Note the add'l 'i' for those >>>> wondering >>>> > if he needs help with the handtrucks.) >>>> > >>>> > Trying to get a quick headcount so I know what to tell Martha's to >>>> set >>>> > aside for us. >>>> > >>>> > Looking forward to seeing whoever's able to show up! >>>> >>>> Likely but not certain >>>> >>>> mm >>>> ___ >>>> gnhlug-discuss mailing list >>>> gnhlug-discuss@mail.gnhlug.org >>>> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >>>> >>> ___ >>> gnhlug-discuss mailing list >>> gnhlug-discuss@mail.gnhlug.org >>> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >>> >> ___ >> gnhlug-discuss mailing list >> gnhlug-discuss@mail.gnhlug.org >> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >> > ___ > gnhlug-discuss mailing list > gnhlug-discuss@mail.gnhlug.org > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ > -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Edit over SSH.
Like this? Been in base emacs for years. https://www.gnu.org/software/emacs/manual/html_node/emacs/Remote-Files.html -marc On Mon, Feb 25, 2019 at 7:00 PM Dan Garthwaite wrote: > Bill is correct. Just stick to: > vim scp://target.host.com/.bashrc > > On Mon, Feb 25, 2019 at 4:32 PM Bill Freeman wrote: > >> Resistance (like capacitance) is futile. Stay with the one true editor. >> Whatever nifty feature you saw, there is probably an extension to do it in >> emacs. (Or you can write one.) >> >> On Mon, Feb 25, 2019, 2:52 PM Ken D'Ambrosio wrote: >> >>> Hi, all. In Emacs, it's trivially easy to open a file on a remote host: >>> >>> emacs /user@host:/path/to/file >>> >>> And while I *do* enjoy Emacs, I admit that some of the other IDE/editors >>> I've seen look kind of nifty. But opening files via SSH is really, >>> really handy -- to the point where I consider it a dealbreaker to not >>> have it. I found Visual Code can do SSH, but you have to (at least, by >>> my reading) set up per-host profiles, etc. Bleh. I know that vim can >>> do it, but I'm just not a vim guy. I'm just not interested in doing >>> some out-of-the-box thing like sshmount (or whatever it is). So, at the >>> end of the day, anyone have an editor they enjoy where it's as easy to >>> open a file over SSH as it is in Emacs? >>> >>> Thanks for any thoughts you might have... >>> >>> -Ken >>> ___ >>> gnhlug-discuss mailing list >>> gnhlug-discuss@mail.gnhlug.org >>> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >>> >> ___ >> gnhlug-discuss mailing list >> gnhlug-discuss@mail.gnhlug.org >> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >> > ___ > gnhlug-discuss mailing list > gnhlug-discuss@mail.gnhlug.org > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ > -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Linux for time lapse and wifi?
Here is another blog post with timelapse videos using the arduino hack of US FIRST Robotics 2013 competition: http://blog.nozell.com/2013/03/7-hours-of-engineering-pit-from-new.html -marc On Sat, Jul 1, 2017 at 12:53 PM, Marc Nozell (m...@nozell.com) < m...@nozell.com> wrote: > > A lot depends on what kind of camera you are using. > > My arduino hack that Ted pointed to worked great driving a Sony Alpha DSLR > and would likely work with similar DSLRs with some tweaking. It would > require cutting up a shutter release cord ($10?) Last I looked gphoto2 > didn't support pulling images from my camera model, so you may need a way > to manually get the images. > > As many have said, driving a USB webcam is pretty simple and probably your > best bet. If you want to spend ~$50(?) get a Raspberry Pi, the camera > attachment w/ extra long ribbon. That works great for me. The RPi3 has > wifi, so just provide power and some scripting to take the image and push > it somewhere for processing. The RPi3 is probably powerful enough to > collect images and create periodic timelapse videos. > > Depending on your bandwidth, you could have the RPi just livestream > directly to youtube. It isn't a timelapse, but does let you keep an eye on > something and can go back and review anything missed. I did that for a > couple snow storms last April. Very simple scripting to set it all up. > > -marc > > > On Wed, Jun 28, 2017 at 8:51 PM, Richard Kolb II <richard.k...@gmail.com> > wrote: > >> > Marc Nozell wired up a camera with a mechanical release, using Arduino >> > and then converted the resulting .JPGs into videos: >> >> I forgot he did that, I should look into it. >> >> >> Richard Kolb II >> >> >> _______ >> gnhlug-discuss mailing list >> gnhlug-discuss@mail.gnhlug.org >> http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ >> >> > > > -- > Marc Nozell (m...@nozell.com) http://www.nozell.com/blog > -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Linux for time lapse and wifi?
A lot depends on what kind of camera you are using. My arduino hack that Ted pointed to worked great driving a Sony Alpha DSLR and would likely work with similar DSLRs with some tweaking. It would require cutting up a shutter release cord ($10?) Last I looked gphoto2 didn't support pulling images from my camera model, so you may need a way to manually get the images. As many have said, driving a USB webcam is pretty simple and probably your best bet. If you want to spend ~$50(?) get a Raspberry Pi, the camera attachment w/ extra long ribbon. That works great for me. The RPi3 has wifi, so just provide power and some scripting to take the image and push it somewhere for processing. The RPi3 is probably powerful enough to collect images and create periodic timelapse videos. Depending on your bandwidth, you could have the RPi just livestream directly to youtube. It isn't a timelapse, but does let you keep an eye on something and can go back and review anything missed. I did that for a couple snow storms last April. Very simple scripting to set it all up. -marc On Wed, Jun 28, 2017 at 8:51 PM, Richard Kolb II <richard.k...@gmail.com> wrote: > > Marc Nozell wired up a camera with a mechanical release, using Arduino > > and then converted the resulting .JPGs into videos: > > I forgot he did that, I should look into it. > > > Richard Kolb II > > > ___ > gnhlug-discuss mailing list > gnhlug-discuss@mail.gnhlug.org > http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ > > -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Best RAW photo editing tool?
There are a number of RAW image format editing tools, but they all are fairly complex. My needs are usually simple -- I don't agree with the camera's white balance or want to salvage too light/dark images. My camera is the fairly recent Sony A65 (very similar to the A75). Does anyone have a recommendation for the 'best' one before I do a deep dive and learn all of them? The contenders: dcraw darkroom rawstudio rawtherapee ufraw (also the default tool used by gimp and f-spot) Thanks! -marc -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Modern Linux scanners
The work-issued HP OfficeJet 6500 Wireless (~2 years old?) works fine for both printing and scanning. It has a serviceable web interface for scanning of various document types (photo, text, etc). For scanning via the page feeder, using a USB connection is much easier/faster. And supported by SANE. For some personal dedicated scanning needs I picked up a HP ScanJet 5590 which also works out of the box with the SANE drivers. It is USB only, no networking. I'm happy with it. Be sure to use the hp-setup tool to configure HP printers/scanners. -marc (Full disclosure: I work for HP, but not in printer/scanner group) On Mon, Jun 16, 2014 at 8:48 PM, Bruce Labitt bdlab...@gmail.com wrote: Anyone buy a flatbed scanner for linux recently? Looking to scan pages and photographs. Any to buy? Any to avoid? HP G4050 has 'good' sane support to 2400 dpi, seems stupid to pay extra for the 4800x9600dpi. Does HP now generally support linux? Thanks for any insights Bruce ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: SATA card-reader unusable after eject? (was: Nashua LUG and linux question)
Why not just use the 'unmount' button from nautilus rather than 'safely remove'? That is really want you want. -marc On Mon, Oct 21, 2013 at 6:53 PM, Mac ussnd...@charter.net wrote: After reading the responses here: http://askubuntu.com/questions/86019/what-is-the-difference-between-eject-and-safely-remove-device I used the Safely Remove option: leds out. Then I unplugged the molex power connector to the device and plugged it back in. Leds came on and the device auto-mounted. So, id there a command that will bring it back instead of unplugging the power? Would prefer to keep the case closed and I don't particularly like power plugging while up and running... ;) On Sat, Oct 19, 2013 at 3:30 PM, Joshua Judson Rosen roz...@geekspace.com wrote: Mac ussnd...@charter.net writes: I bought a sata card reader. and installed it on my Debian machine. It works fine when I boot up. But if I choose eject or safely remove, it appears to have no power after that. Is it possible to get it back without reboot? Does the block device in /dev/sdwhatever still exist? If so, does running eject -t on it make it work again? -- 'tis an ill wind that blows no minds. ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Mother of all xterms?
If you want to live on the (security) edge, take a look at shell-in-a-box: http://www.aldeid.com/wiki/Shell-in-a-box -marc On Wed, May 22, 2013 at 1:04 PM, Charles Farinella cfarine...@gmail.comwrote: Terminator? http://software.jessies.org/terminator/ -- Charlie Farinella cfarine...@gmail.com 603-924-1977: Home 603-785-3320: Mobile On Wed, May 22, 2013 at 12:06 PM, Ken D'Ambrosio k...@jots.org wrote: Hey, all -- I've gotten quite used to gnome-terminal and konsole, and they both work, but I admit I have a little bit of iterm2 (for the Mac) envy -- e.g., being able to search back through the log to a specific timestamp. Handy, that. So, my question, really, is is there a really cool terminal program out there with lots of bells and whistles? It'd be fun to kick the tires on something new. Thanks, -Ken ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [GNHLUG] MerriLUG: April 2nd 2013 - Bitcoin
Why mine it yourself when you can have others do it for you? http://tech.slashdot.org/story/13/04/06/1448234/new-skype-malware-uses-victims-machines-to-mine-bitcoins Seriously, it appears that the compute needed to mine coins have outstripped the power of CPUs, GPUs and the action is in purpose built ASICs. I wonder at what point the expense of electricity is greater than the value of the mined bitcoin. -m On Sun, Apr 7, 2013 at 10:32 AM, Bruce Labitt bruce.lab...@myfairpoint.netwrote: On 04/06/2013 07:28 PM, Ben Scott wrote: On Thu, Apr 4, 2013 at 5:27 PM, David Rysdam da...@rysdam.org wrote: Peer-to-peer is two guys meeting on a street corner and saying Hey, wanna buy some Bitcoins? :) What if 100 guys meet on a street corner? Umm... then there's more of them? :) It doesn't inherently affect the peer-to-peer nature, if that's what you're asking. And what if that street corner is then blocked, DoS'd if you will, by a rival gang? Isn't that exactly what happened here? I guess so... I get the feeling this analogy has gotten out-of-control. :) -- Ben ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ Anyone doing bit coin mining? Seems like it would favor geeks with high power computers/gaming rigs to decrypt the codes. I've heard that people are harnessing gpu's to do the decryption. Discuss. ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [GNHLUG] MerriLUG: April 2nd 2013 - Bitcoin
Can the slides from last night on bitcoin be made available? Thanks. -m On Sun, Mar 31, 2013 at 4:08 PM, kenta kenta.k...@gmail.com wrote: Passing this information along for Chris Gagnon, the coordinator of MerriLug. MerriLUG is having a meeting on Bitcoin this Tuesday! Topic: Bitcoin Who: Muni Where: Tuesday, April 2nd, 2013 7:00pm until 9:00pm 29 Crown Street, Nashua, NH 03060 http://makeitlabs.com/about/map/ MakeIt Labs is actually located on the backside of the building at 29 Crown St. and can be a bit tricky to find. To get here, you will need to pass the place the GPS says we are at by at least 200 yards. Take a right onto the tree lined dirt road after Greenerd Press. The dirt road turns right to the train yard and MakeIt Labs parking lot. ___ gnhlug-announce mailing list gnhlug-annou...@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-announce/ ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: hp docking station free to a good home
And the docking station has been claimed. -m On Fri, Dec 28, 2012 at 11:10 AM, Marc Nozell (m...@nozell.com) noz...@gmail.com wrote: I have a docking station but no longer a laptop to connect with it. HP Docking Station with Dual-Link DVI Product: EN488AA Here is the list of compatible laptops: http://h10010.www1.hp.com/wwpc/ca/en/sm/WF32a/A1-12134674-12134748-12134748-12134756-12134756-74520573.html Free for the asking. Pick up in Merrimack or find it in the junk heap at the transfer station next month ;-) -marc -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [GNHLUG] Reminder: ManchLUG, Tuesday June 19th. Marc Nozell on Raspberry Pi
I've put the slides from last night here: http://nozell.com/blog/2012/06/19/raspberry-pi-show-n-tell-manchlug/ -marc On Tue, Jun 19, 2012 at 12:13 AM, kenta kenta.k...@gmail.com wrote: Reminder, meeting later today: On Wed, Jun 13, 2012 at 10:18 PM, kenta kenta.k...@gmail.com wrote: Join us on Tuesday June 19th for ManchLUG! During this month's meeting Marc Nozell will be talking about his experiences with Raspberry Pi. If you're interested in this new, $35.00, single board computer platform, stop on by! Have one yourself? Share what you've been doing (or plan to do) with your new board. Schedule: 6:30 PM - Pre-meeting social. If you're ordering food, please try to do so before the start of the presentation. 7:00 - 8:30 PM Meeting kick-off followed immediately by Marc Nozell's show-n-tell on Raspberry Pi Location: The Farm 1181 Elm St. Manchester, NH (corner of Elm and Bridge in downtown Manchester) When you enter The Farm go to the left side of the restaurant and locate the small function room or ask the hostess for assistance Parking: Parking in downtown Manchester is enforced between 8AM - 8PM, however the metered spaces in front of The Farm on Elm Street and the lot behind The Farm are free after 5:30PM. For further details: http://www.manchesternh.gov/website/Departments/Parking/tabid/182/Default.aspx Feel free to RSVP on Facebook: https://www.facebook.com/events/485905318092605 You can also find the Manchester Linux Users group: @ManchLUG on twitter.com @ManchLUG on identi.ca ___ gnhlug-announce mailing list gnhlug-annou...@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-announce/ ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: EMACS - enabling at spi2 support
I don't know anything about at-spi2, but... The 'apropos' command within emacs is useful for poking around as is the info manuals (C-h i). You won't see any el files unless you install emacs32-el and you don't need that unless you are curious. The compiled versions will on your system, so look for *.elc files usually under /usr/share/emacs/ -marc On Thu, Apr 5, 2012 at 7:50 AM, Susan Cragin susancra...@earthlink.netwrote: Does anyone know how to enable at-spi2 support in emacs? My understanding is that it doesn't automatically kick in when you start EMACS, but that there is a module you can load, and that the module is included with the program or available on the debian / ubuntu packaging. So far I've downloaded every likely candidate and there is nothing. (Where are EMACS's el's kept, anyway? I can't find the folder on my hard drive.) Thanks. I'm sort of an EMACS newbie. Susan Cragin ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
MV.com is shutting down May 1st
As a long time dialup and then DSL customer of MV, I'm sad to see them go. -marc --- Dear MV customer, We regret to inform you that MV Communications will be shutting down very shortly. Most primary services will be terminating as of about the first of May including dialup and DSL connections. We have put up a few notes on a wiki page here: http://wiki.mv.com/ShuttingDown which we will be updating as needed or in response to questions raised. Please note, as explained on the webpage above, that email, web pages, DNS, and shell logins will continue without charge for a while. The page mentions some alternative providers of dialup and DSL service to help you find alternative service. We are grateful for your past patronage and are sorry for the short notice. MV Communications mv-ad...@mv.com -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Plug Computers for whole-home audio (was: [GNHLUG] REMINDER: ManchLUG: Tuesday April 19th @ Wings Your Way - Manchester NH)
I've played some mp3s using 'mocp' and sounds a distant on one channel(?) but may be something to fix in the alsamixer. For example listening to 'Face The Face' its like I'm next to the chorus keyboards and Pete Townshend is off in the distance. The settings for Master/PCM/Mic are all the same levels in the midrange. As for the optical audio out, I don't have thing to plug into it. FWIW, I've not been successful using arecord to grab sound from the mic. -marc On Fri, Apr 22, 2011 at 9:41 AM, Joshua Judson Rosen roz...@geekspace.com wrote: kenta kenta.k...@gmail.com writes: A little bump for tomorrow night! UPDATE: Marc Nozell will bringing his new DreamPlug as well to show off in slot #3. Hm. I've really gotta find a way to start attending these things I've been considering getting one (or four...) plug computers to deploy as part of a PulseAudio- and MPD-based whole-home audio system, where I've currently deployed scavenged full-scale (and full-volume...) PCs as a proof of concept. My original plug-computer thought was that I'd buy some USB audio-adapters to use with them, and then I heard about the DreamPlug coming out with integrated audio. So, maybe that's an option--the big question to which I can't find an answer is: How's the audio quality on the DreamPlug? -- Don't be afraid to ask (λf.((λx.xx) (λr.f(rr. ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Plug Computers for whole-home audio (was: [GNHLUG] REMINDER: ManchLUG: Tuesday April 19th @ Wings Your Way - Manchester NH)
On Fri, Apr 22, 2011 at 11:40 AM, Ken D'Ambrosio k...@jots.org wrote: Actually, a confluence of events has me playing with my Sheeva today. By sheer circumstance, I - Need to replace my bedroom computer with something quiet - Bought a 10-port powered USB hub - Acquired, gratis, a USB-to-VGA converter - Saw a video of someone running Gnome off of a Sheeva plug. It seemed like the perfect setup for my Sheeva to step in. Unfortunately, for one, as of 9.10(?), Ubuntu no longer supports the Sheeva; they compile for a higher CPU than the Sheeva has. Then, my 16 GB SD card gave up the ghost. So I'm installing Debian on a newly acquired card; what with only 512 MB of RAM, I don't anticipate that I'll be making huge inroads into graphical editing or anything, but assuming I get it working as a workstation, it'll just be DamnCool(tm). pro-tip: to save your SD card from excessive writes, look at flashybrid. It works well for me. Description: automates use of a flash disk as the root filesystem Flashybrid is a system to help in setting up and managing hybrid flash/disk/ram based Debian systems which can run most of the time using only a small flash disk for their root filesystem and do a useful, but limited task (such as being a router, or a PDA, or a rescue system on a USB keydrive). The flash can be as small as 32 mb, though 64 to 256 mb is more comfortable. -marc -Ken On Fri, April 22, 2011 10:37 am, Marc Nozell (m...@nozell.com) wrote: I've played some mp3s using 'mocp' and sounds a distant on one channel(?) but may be something to fix in the alsamixer. For example listening to 'Face The Face' its like I'm next to the chorus keyboards and Pete Townshend is off in the distance. The settings for Master/PCM/Mic are all the same levels in the midrange. As for the optical audio out, I don't have thing to plug into it. FWIW, I've not been successful using arecord to grab sound from the mic. -marc On Fri, Apr 22, 2011 at 9:41 AM, Joshua Judson Rosen roz...@geekspace.com wrote: kenta kenta.k...@gmail.com writes: A little bump for tomorrow night! UPDATE: Marc Nozell will bringing his new DreamPlug as well to show off in slot #3. Hm. I've really gotta find a way to start attending these things I've been considering getting one (or four...) plug computers to deploy as part of a PulseAudio- and MPD-based whole-home audio system, where I've currently deployed scavenged full-scale (and full-volume...) PCs as a proof of concept. My original plug-computer thought was that I'd buy some USB audio-adapters to use with them, and then I heard about the DreamPlug coming out with integrated audio. So, maybe that's an option--the big question to which I can't find an answer is: How's the audio quality on the DreamPlug? -- Don't be afraid to ask (λf.((λx.xx) (λr.f(rr. ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: VoltDB?
Have you looked at the Drizzle fork of MySQL? It is being driven by a number of ex-MySQL folks and focusing on cloud/web architectures and scaling. http://drizzle.org/ -marc On Wed, Apr 6, 2011 at 5:46 PM, Thomas Charron twaf...@gmail.com wrote: Anyone looked at this yet? http://voltdb.com/ Just wondering if it's worth the time. I'm really veering away from MySQL due to Oracle, and it seems so shiny and new. :-D -- -- Thomas ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Android printer recommendations
This is what I have: Model Name: HP Officejet 6500 E709 Series Product Number: CB057A http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/18972-18972-238444-3328086-3328086-3795309-3795426.html -marc On Fri, Dec 17, 2010 at 11:44 AM, Alan Johnson a...@datdec.com wrote: On Thu, Dec 16, 2010 at 5:22 PM, Marc Nozell (m...@nozell.com) noz...@gmail.com wrote: Ok granted I do work for HP, but... The latest printer they gave to teleworkers is an OfficeJet 6500 which is a home/SMB printer/scan/fax that sits on the desk. It is wired or wireless network. CUPS and Win/Vista has no problem printing directly to it, duplex and other 'printing profiles' (black only, photo, etc). And xsane works just great with it as well. No config hacking required. -marc Would you provide the modle number on that, please? I've found several options within the OfficeJet 6500 name. For example, here is a list of options that Printer Share Mobile works with: HP Officejet 6500 All-in-one Printer - e709a HP Officejet 6500 All-in-one Printer - e709c HP Officejet 6500 e709a HP Officejet 6500 e709c HP Officejet 6500 e709n HP Officejet 6500 e710 HP Officejet 6500 e710a-f HP Officejet 6500 e710n-z HP Officejet 6500 Wireless All-in-one Printer - e709n HP Officejet 6500 Wireless All-in-one Printer - e709q HP Officejet 6500 Wireless e709n HP Officejet 6500 Wireless e709q ___ Alan Johnson a...@datdec.com -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Android printer recommendations
Ok granted I do work for HP, but... The latest printer they gave to teleworkers is an OfficeJet 6500 which is a home/SMB printer/scan/fax that sits on the desk. It is wired or wireless network. CUPS and Win/Vista has no problem printing directly to it, duplex and other 'printing profiles' (black only, photo, etc). And xsane works just great with it as well. No config hacking required. -marc On Thu, Dec 16, 2010 at 4:52 PM, Benjamin Scott dragonh...@gmail.com wrote: On Thu, Dec 16, 2010 at 4:17 PM, Ryan Stanyan ryan.stan...@gmail.com wrote: I see the 600 DPI in terms of single dimensional resolution. So I'm guessing that 600 DPI is the current limit for letter-sized paper in terms of horizontal resolution. Right. My question was, why are all laser printers 600 DPI, while some inkjets at 1200 DPI, some are 2400 DPI, etc. All I know is that printers are the only real things in computers nowadays that make my blood boil. You clearly haven't used enough enterprise software. ;-) But yah, printers are about the only hardware in computing which not only hasn't advanced as the same pace as everything else, but have actually gotten *worse* in recent times. See also: http://theoatmeal.com/comics/printers -- Ben ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
critical mass of emacs users in GNHLUG?
I've recently fallen in love wit a new emacs library, org-mode. I'd be up to give a talk at ManchLUG or MarthasLUG if there are enough people interested. Here is how it is described on http://orgmode.org/ Org - an Emacs Mode for Notes, Project Planning, and Authoring Org-mode is for keeping notes, maintaining ToDo lists, doing project planning, and authoring with a fast and effective plain-text system. With a green unicorn as its logo, you know it is good stuff! -marc -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Spike in SSH attacks
FYI, I've been using sshguard for a few month to drop routes to sites that are probing my server. None of the docs seemed to be quite right, so I wrote up some notes on getting it working debian/Lenny here: http://nozell.com/blog/2010/03/09/sshguard-on-debianlenny/ You'll know it is working when you get stuff like this in the logs: lordshiva:~# grep sshguard /var/log/auth.log Jun 20 10:49:37 lordshiva sshguard[2660]: Blocking 211.254.130.116:4 for 420secs: 4 failures over 542 seconds. Jun 21 01:49:05 lordshiva sshguard[2660]: Blocking 217.118.97.58:4 for 420secs: 4 failures over 6 seconds. Jun 21 01:57:51 lordshiva sshguard[2660]: Blocking 24.39.144.137:4 for 420secs: 4 failures over 780 seconds. Jun 21 01:58:52 lordshiva sshguard[2660]: Blocking 217.118.97.58:4 for 1680secs: 4 failures over 6 seconds. Jun 21 02:05:17 lordshiva sshguard[2660]: Blocking 24.39.144.137:4 for 1680secs: 4 failures over 4 seconds. Jun 21 02:50:04 lordshiva sshguard[2660]: Blocking 217.118.97.58:4 for 0secs: 4 failures over 6 seconds. http://nozell.com/blog/2010/03/09/sshguard-on-debianlenny/-marc On Mon, Jun 21, 2010 at 9:28 AM, Benjamin Scott dragonh...@gmail.comwrote: http://isc.sans.edu/diary.html?storyid=9031 http://isc.sans.edu/diary.html?storyid=9034 Apparently attackers are going after keyboard interactive authentication, which is separate from password authentication. If you are using SSH public/private keys only, make sure you have ChallengeResponseAuthentication no set in your /etc/ssh/sshd_config file. If you must use passwords, make sure everyone has a strong password, and consider using techniques like scan detection, IP-address access control, port knocking, non-standard port, etc. -- Ben ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: OpenStreetMap compatible GPS?
On Mon, Apr 26, 2010 at 9:51 AM, bruce.lab...@autoliv.com wrote: Towards that end, I'd like to get a new GPS that is OpenStreetMap compatible. My google-fu is pretty lacking - as many list members may have noticed over the years. The OpenStreetMap site(s) I've visited haven't been too illuminating. Does anyone have direct experience with GPS units that work with OSM and are decent? Oh, and the GPS unit is recent enough that I could buy it new? Maybe it is just time to get a new phone. The Droid has these apps that use the OpenStreetMap data: * MapDroyd * MultiMap * Maps (-) * PocketNavigator * OSMTracker for Android * Osmdroid -marc -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Linux for cloud computing: Request for Input
On Fri, Mar 5, 2010 at 3:35 PM, Jon 'maddog' Hall mad...@li.org wrote: So just like I said RIP to Grace Murray Hopper, I now say RIP to DECnet Linux. There is still some good stuff happening with VMS, for example if you are an hp software partner, you can get ssh access to a virtual machine running OpenVMS 8.4 EFT. See: http://bit.ly/bmNyDE Or start at http://www.hp.com/go/dspp and drill down a bit to the Partner Virtualization Program part. -marc -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: great big gobs of RAM and piles of cores to boot
Have you seen http://www.hp.com/go/communitylinux ? -marc On Tue, Sep 8, 2009 at 5:01 PM, Alan Johnson a...@datdec.com wrote: I'm spec-ing some blades for virtualization of our production systems and I just want to check with the masses (that's you all) about any known issues with Linux, Xen, or Ubuntu Hardy Server when it comes to up to 24 cores and as much as 256GB of RAM on the host. These are HP C-class blades, BL685s and BL465s to be exact. I have no reason to think I will have any issues, but I'm just paranoid about spending this much of my employer's money. I've have plenty of experience with these technologies on various lesser boxes and have no issues, but without having actually installed this stuff myself on machines of quite this scale... =) Sorry to waste all your time with my wussiness. I appreciate any advise and will happily accept any abuse off-list. ;-p [For you Caddy Shack fans out there, I rearranged the words in the subject to match the rhythm of great big gobs of greasy grimy golfer guts.] -- Alan Johnson a...@datdec.com ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Wifi @ Nashua Library?
I was at the library tonight and had no problem connecting. Even rebooted just to make sure it wasn't a fluke. The only thing different was last time my hp2133 was restored from hibernating and tonight it was from a cold boot. Not that it has problems restoring from hibernation and connecting to our home wifi networks.Strange. FYI the Nashua library has free access to a number of 'for-pay' databases, like Ancestry.com (genealogy, including scanned/indexed census records) and newsbank.com (historical scanned/indexed US newspapers). Sadly access is tied to their locked down WinPCs -- just being on the library network is not enough.Other databases can be used from home if you log in with your library ID. -marc On Wed, Aug 26, 2009 at 4:55 PM, Jim Kuzdrallgnh...@intrel.com wrote: On Wednesday 26 August 2009 15:49, Marc Nozell (m...@nozell.com) wrote: The Nashua Public Library has free wifi, but I've not been able to connect, but other Windows users nearby have. It is an unsecured network so it isn't a key or passphrase problem. I see in the logs that dhclient isn't getting a lease: I'm using Ubuntu/Jaunty. Anyone successful? I log on there successfully - most of the time. Their server gets overloaded easily. I am running OpenSuSE 10.3. My firewall setting was keeping me out, apparently. I could log in with the firewall down. When the firewall was changed to allow all of its listed services (DHCP, DNS, HTTP, IMAP, IMAPS, LDAP, IPP, NFS, NIS, SSH), I got on. Not being very patient, I never went back to see which of them had to be on. (They cut you off without warning if your download reaches 1 GB.) Jim Kuzdrall ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/ -- Marc Nozell (m...@nozell.com) http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Backups and Amazon S3 storage?
I used to keep a backup of my photos and other personal important files on a large USB drive at my office so in case my house burned down I'd at least have those. Now as a teleworker my home *is* my office and need to figure out off-site storage. There are a number of tools to mirror files to Amazon S3, but does anyone have a specific recommendation? Ideally it should be incremental, encrypted, simple to use, simple file recovery, etc. Bonus for allowing for multiple backups with little additional storage (like rsnapshot) The Good tool for archiving to media? discussion didn't seem to come to a resolution. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [GNHLUG] MerriLUG Nashua, Thur 19 Jun, MySQL: The Whys, Whats, and Watch-outs
On Wed, Jun 18, 2008 at 09:05:46AM -0400, Jim Kuzdrall wrote: Who : Marc Nozell, MySQL Conference presenter, Officially certified What : MySQL: The Whys, Whats, and Watch-outs Where: Martha's Exchange Day : Thur 19 Jun **Tomorrow** Time : 6:00 PM for grub, 7:30 PM for discussion (usually upstairs) I've made my slides available here: http://docs.google.com/Presentation?id=dcwc3b2p_63ck9zndhh -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
free DEC 1152 laser printer
I have a free DEC 1152 laser printer in good working condition to whoever wants it. It works under linux using a parallel port. It is located in Merrimack. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Finding the process w/ highest I/O ?
On Thu, May 15, 2008 at 02:48:22PM -0400, Paul Lussier wrote: There's an errant process eating up NFS space. We have over 400 NFS clients, any one of which *could* be the culprit. I'm thinking a shell (or perl) script, ssh, and some /proc thingy here should be able to tell me this... Have you seen collectl? It is a pretty comprehensive ad-hoc monitoring tool and has NFS client and server stats support. The author works in the HPTC space and it works in some cluster environments. And it is completely written in perl... -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [GNHLUG] MerriLUG Nashua, Thur 21 Feb, MySQL: The Whys, Whats, and Watch-outs (Talk Postponed)
On Wed, Feb 20, 2008 at 07:14:26AM -0500, Jim Kuzdrall wrote: Who ??: Marc Nozell, MySQL Conference presenter, Officially certified What : MySQL: The Whys, Whats, and Watch-outs Where: Martha's Exchange Day ??: Thur 21 Feb **Tomorrow** Time : 6:00 PM for grub, 7:30 PM for discussion (usually upstairs) Sorry folks but I've come down with the flu today (trust me you don't want it) and my MySQL talk is **POSTPONED** I'll gladly give the talk some other time. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: [OT] Keene Pumpkin Festival..
On Wed, Oct 31, 2007 at 02:47:57PM -0400, Greg Rundlett wrote: On 10/31/07, Thomas Charron [EMAIL PROTECTED] wrote: I meant to ask earlier, did anyone end up going to the keene pumpkin festival like two weeks ago? https://kilomonkeys.com/1022071003.jpg Happy Peaceful Halloween http://rundlett.com/gallery/v/family/2007/dsc00668.jpg.html LOL pumpkin http://www.flickr.com/photos/marcn/1814255761/ -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: MySQL v. PostgreSQL, continued, was: Microsoft Access - two questions
On Tue, Jul 31, 2007 at 11:53:23AM -0400, Jon 'maddog' Hall wrote: No annoyances like stored procedures Oh well, they just added stored procedures in 5.0 And a bunch of other useful features such as triggers, views and more storage engines for specialized database needs (some via 3rd parties). -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Liberation Fonts?
On Wed, 2007-05-23 at 11:35 -0400, Ted Roche wrote: Is that like Freedom Fries? Anyone tried this? https://www.redhat.com/promo/fonts/ They are pretty nice. I've installed them on my Ubuntu/Feisty laptop by just unpacking them into ~/.fonts and running fc-cache. Rebooting would have worked too. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://nozell.com/blog signature.asc Description: This is a digitally signed message part ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Nashua Telegraph article on MythTV installfest
Today's Nashua Telegraph has an article on the front of the second section Who needs TiVo when you’ve got a room full of geeks? by Dave Brooks. You'll need to be a subscriber to get to the article: http://www.nashuatelegraph.com/apps/pbcs.dll/article?AID=/20070404/COLUMNISTS03/204040339 Here are some quotes: - Kaufman was at New Hampshire Technical Institute in Concord thanks largely to Jon “Maddog” Hall, Amherst’s world-famous Linux guru. (The two men are practically neighbors but hadn’t realized it previously – another nod to geek-led community building.) Hall is executive director of Linux International, in which role he zips around the globe advocating open source. But closer to home, he’s also a driving force within the Greater New Hampshire Linux Users Group, the biggest of the state’s several LUGs. In that role, occasionally he brings together Granite Staters who love to plunge waist-deep into computer code, and organizes an open-source project. - The MythTV project was born in 2002. Like most open-source projects that depend on the effort of volunteers, it remains in what might politely be called a state of flux. In other words, it works (sort of, usually) but it’s not easy. Alas, it remained in flux Saturday, when things did not go quite as smoothly as was hoped, largely because the technical leader called in sick. “We may have to delay the follow-up,” Hall said, ruminatively tugging on a long white beard that invariably draws Kris Kringle comparisons. I was only able to hang around for the morning, and folks were still wrestling with software downloads when I left. - If they can create a device that makes TV shows I want to watch, then even I will learn how to assemble it. Although maybe that’s too mythical even for MythTV. - -marc -- Marc Nozell ([EMAIL PROTECTED]) http://nozell.com/blog signature.asc Description: This is a digitally signed message part ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Dowloading of podcasts etc. - anyone have a HOWTO?
On Tue, 2007-04-03 at 19:29 -0400, Bill Sconce wrote: I hope this doesn't mean I'm becoming a podPerson, but... Does anyone have a pointer to a HOWTO for, or know how to, download Web files offered for streaming so that they can be staged for ripping to e.g. a portable player? Does this help? http://nozell.com/blog/2007/02/25/convert-audio-from-wmv-files-to-mp3/ -marc -- Marc Nozell ([EMAIL PROTECTED]) http://nozell.com/blog signature.asc Description: This is a digitally signed message part ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: *NIX on Itanium
On Tue, Jan 30, 2007 at 07:42:54AM -0800, mike shlitz wrote: Best choice for *NIX OS for this machine? I have CentOS running well on my old DEC Alpha. Ubuntu running smoothly on some iMac's, I see FreeBSD has a port for IA64, or maybe FC-6 (64bit)? The last time I heard someone say Itanium at a LUG meeting, it was followed by hoots of laughter. The DL590 is of circa 2002/2003 vintage but at the time SLES7 and Red Hat 7.2 were both supported on it. * Deployment of Red Hat Linux 7.2 Itanium Processor Family on Compaq ProLiant DL590/64 Servers http://h2.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_16s6-0502a-wwen_rev0_us/TPM_16s6-0502a-wwen_rev0_us.pdf * Deployment of SuSE Linux Enterprise Server 7 for Itanium Processor Family on Compaq ProLiant DL590/64 Servers http://h2.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_164j-0102a-wwen_rev2_us/TPM_164j-0102a-wwen_rev2_us.pdf * Firmware and drivers can be found here: http://h18023.www1.hp.com/support/files/server/us/family/model/1263.html?lang=encc=usprodSeriesId=254895 I'd try installing debian it... -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
Re: Tuning FULLTEXT performance (was Re: Memory upgrade and swap partition size)
On Wed, Sep 27, 2006 at 08:36:49PM -0400, Fred wrote: On Wednesday 27 September 2006 09:36, Ben Scott uttered thusly: On 9/27/06, Fred [EMAIL PROTECTED] wrote: MyISAM tables stinks when it comes to heavy updates, though are wicked fast on the queries. There's a pretty direct cause-and-effect relationship there. You might want to look into more advanced database software. -- Ben Most of the tables are InnoDB tables; only table that is MyISAM is really the one I need to use FullText with. However, it may be the case where I could use a more generalized search system and tie that in to the rest of the system. There are two search open source search engines that I know of; I should consider them. Peter Zaitsev, formerly in the MySQL performance group, mentioned in his blog[1] today the full text storage engine SPHINX[2]. Probably worth a look. [1]http://www.mysqlperformanceblog.com/2006/09/27/life-beyond-mysql/ [2]http://www.sphinxsearch.com/ -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Dapper Drake pointer from Bill Sconce
On Wed, 2006-06-28 at 10:03 -0400, Ted Roche wrote: Kudos from Bill Sconce for pointing out that of the two Dapper Drake disks - the well-named Desktop and the mysterious Alternate - the Alternate disk can install in text mode easier, faster and occasionally on a machine that has trouble with the GUI installer. I updated an HP Omnibook PII-266 using the text interface and it worked well. I've been using Ubuntu on my corporate compaq nc6000 laptop since the Warty and upgrading all the way to Dapper. Naturally it has gathered various configuration cruft along the way. Recently I installed Dapper from scratch and have taken notes of all the post-installation configuration step to get it set up the way I like it: http://nozell.com/blog/my-ubuntu-dapper-configuration/ It is a cut-n-paste from a personal, private wiki so the formatting is a little rough. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Dapper Drake pointer from Bill Sconce
On Wed, 2006-06-28 at 11:59 -0400, Python wrote: Thanks for the tips. An alternative for ntp servers is http://www.pool.ntp.org/ 0.us.pool.ntp.org 1.us.pool.ntp.org 2.us.pool.ntp.org I should have been more clear, those 15.x.x.x NTP servers are inside our corporate firewall. The external NTP servers aren't proxied. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Dapper Drake pointer from Bill Sconce
On Wed, Jun 28, 2006 at 02:30:40PM -0400, Tom Buskey wrote: On 6/28/06, Marc Nozell [EMAIL PROTECTED] wrote: I've been using Ubuntu on my corporate compaq nc6000 laptop since the Warty and upgrading all the way to Dapper. Naturally it has gathered various configuration cruft along the way. Recently I installed Dapper from scratch and have taken notes of all the post-installation configuration step to get it set up the way I like it: http://nozell.com/blog/my-ubuntu-dapper-configuration/ Has anyone upgraded from Breezy(?) 5.10 to Dapper? I've tried to upgrade my laptop with both the desktop and alternate CDs with no luck. Tried redownloading the image/reburning w/ verify, etc. Basically you can replace 'breezy' references with 'dapper' references in /etc/apt/sources.list and then: sudo apt-get update sudo apt-get dist-upgrade And also read this: https://help.ubuntu.com/community/DapperUpgrades -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: GNHLUG RSS feeds, was Re: GNHLUG.Www - Automated notification of topic changes
On Tue, May 02, 2006 at 01:45:23PM -0400, Cole Tuininga wrote: On Tue, 2006-05-02 at 13:39 -0400, Ted Roche wrote: What sort of aspects would you (or any others, please) be interested in? For some of us, that question is its own answer in a sense. Part of what I'd like to know is Why should I be interested in RSS, and what aspects are there? The short answer is you, as a knowledge worker, can better keep yourself informed with what is happening out there in news, (tech|politics) blogs, wikis, and pretty much any frequently-updated site. A lot of search sites (google, technorati, MSN search, etc) let you setup searchs that return in RSS format. For example anytime someone mentions, say my name, in a blog, it shows up in the aggregator. Flickr lets you create feeds based on particular tags, say all those photos tagged with MySQLUC06. My personal RSS aggregator of choice is currently http://bloglines.com with over 300 feeds (not that it is ever 'caught up') It really changes the way I use the web. No longer do I hit slashdot.org, cnn.com, cnet.com, sourceforge.net looking for new info. Nor do I have to remember to check in with amusing blogs like jwz.org to see if he has updated -- now it just shows up in my list of feeds. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Custom Distro
On Mon, Jan 30, 2006 at 11:55:46AM -0500, Paul Lussier wrote: Paul Lussier [EMAIL PROTECTED] writes: I have a pretty convoluted and heavily customized FAI environment here, so I was looking for something to tell me why or how this would be better. I did not succeed :) Hmm, Now I'm wondering if this is vapor-ware: As this link: http://linuxcoe.sourceforge.net/#download mentions this link for downloading the project files: https://sourceforge.net/project/showfiles.php?group_id=144250 which seems to lead to an empty sourceforge project Check out the CVS snapshots: http://linuxcoe.sourceforge.net/snapshot I use LinuxCOE at work and it works well. The nice thing is the support for multiple distros -- debian, fedora, rhel, sles, suse, ubuntu. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Blogging software
On Mon, Jan 16, 2006 at 09:01:57AM -0500, Cole Tuininga wrote: Requirements: - Web based (no having to ssh in to update a blog entry or anything) - Simple to use - Lightweight (not looking for a *nuke type application) - Usable by low bandwidth connections I'd recommend WordPress (the new 2.0 is especially nice btw). Installation is nearly trival -- assuming you already have a php enabled web server with access to a MySQL database that is. While you can post using the web interface (now WYSIWYG or HTML) you can also post via email. You'll need to setup a 'secret' pop3 account for it to poll before you go. Are you going to be taking photos? Flickr.com will automatically post photos that you send to a secret flickr.com address. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Photo browsing/Ubuntu.
On Sat, Dec 31, 2005 at 11:25:06AM -0500, Ken D'Ambrosio wrote: [And this time, from an add'y the list knows. Sorry for any duplicates.] I hate to admit it, but I really like XP's photo-browsing-when-it-sees-JPGs-in-a-directory feature. I could have sworn that Nautilus used to have this once upon a time (and, for that matter, was even demo'd at a MerriLUG meeting by the Eazel guy); is this one of the features the Gnome folks have decided we don't need? Is there something else youses [sic] really like? Ken, In the upper right corner is 'View as List', change it to 'View as Icons' and you'll be happy. It even displays images from wmv/avi/mov files if you have the right codecs installed. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: howto demo website
On Tue, 2005-09-20 at 10:27 -0500, Richard Soule wrote: Greg Rundlett wrote: Anybody have suggestions for good (free software) tools for recording and playing back a website demo? I built an application that has a web frontend, and I want to record user interaction through the site so that I can do demonstrations of the application without requiring the live application. Say for doing training, or documentation. Not exactly free software, but... A similar 'freeware' (free-as-in-beer, no source) tool is wink (http://www.debugmode.com/wink/). It too generates flash and lets you edit and annotate the video. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Nashua Meeting
I'll be hopefully going, barring sudden explosive misbehavior of children, which I don't expect. Sounds like we need GNHLUG babysitting services so more of us can regularly show up. It would definitely help my attendance record! -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Captive-ntfs
On Tue, Sep 14, 2004 at 04:11:46PM -0400, Whelan, Paul wrote: Hi, Question for any captive-ntfs users out there. Has anyone experienced problems when writing to an xp-sp2/ntfs partition while it's in a hybernate state? The problem I experience when I write files to the partition in hybernation is this: when the session resumes - no problem, but when that resumed xp session reboots it then goes through a checkdisk on boot up and deletes the files that were added by captive-ntfs. It sees them as corrupted inodes (or whatever). You hibernate XP and then boot Linux? That seems very dangerous to me. I've been successful modifying a WinXP file (happened to be the SAM file) using Captive-NTFS when booted from a recent Knoppix CD. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Captive-ntfs
On Tue, Sep 14, 2004 at 05:15:04PM -0400, Whelan, Paul wrote: Hmmm, never thought of that as dangerous, but that's just me I guess. I've been doing that for years. I also put linux into hibaernate (software-suspend) and boot xp when I need to. I don't have any problems with captive when writing to a non-suspended partition. Dangerous in the sense that the hibernated system may save its cached view of the file system and then you are changing the on-disk representation of the disk. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
OT: Re: Site defaced - what next?
On Mon, 2004-08-09 at 15:12, Fred wrote: On Sun, 2004-08-08 at 20:34, [EMAIL PROTECTED] wrote: (There's the area for libertarians to engage, btw, businesses care only about money and not at all about rights, so this is the danger zone with law enforcement encroachment!) gnhlug = greater new hampshire libertarian users group? ;-) For those folks interested in discussing political theories, libertarian or otherwise, here are some websites that may interest you. * http://www.freestateproject.org NH was chosen as the state for libertarians to move to. * http://www.savegrafton.org/ an acquaintance who is started a blog in response to Grafton, NH being chosen as the first town to implement a libertarian utopia. * http://groups.yahoo.com/ a bunch of vocal folks who will gladly debate you. See the mailing lists for freetownproject, Free_Town_Project, GraftonCrisis, nhlivefreeordie, freetownproject, etc Now back to the geek talk please. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Lost my partition table - can I recover?
On Thu, 2004-08-05 at 09:38, Scott Garman wrote: My situation: I have an HP server with two hot-swap SCSI drive bays. It's got a RAID controller in it, which has to initialize new drives before they can be recognized by the controller. It refers to them as logical drives. I have inadvertently deleted the logical drive on the original disk, and I can not boot to Linux anymore. I am certain that all that's happened is the RAID controller re-wrote a new partition table with no partitions. When I boot from a RHEL 3.0 CD in rescue mode, it sees the drive detected as /dev/cciss/c0d0, whereas before it was /dev/cciss/c0d0p1. The /dev/cciss/c0d0 refers to the entire first disk (think /dev/sda), while /dev/cciss/c0d0p1 (think /dev/sda1) refers to the first partition on the first disk. Um, did you just trash your entire disk? -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: small samba
On Wed, 2004-08-04 at 07:22, c.e.smith wrote: does anyone have any arecomendations for one of the small distros that WILL run Samba hooping that this might save me some time in trying them out debian. Do a minimal install (I'd guess around 100M) and then: apt-get install ssh samba That will install ssh daemon for secure remote shell access and samba (plus any dependencies they may have) -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: This monday: Webmin, Gentoo
On Fri, Jul 30, 2004 at 09:09:45AM -0400, Ed Lawson wrote: [EMAIL PROTECTED] wrote: On Thu, 29 Jul 2004, at 10:48pm, [EMAIL PROTECTED] wrote: Gentoo - an awesome file manager. I thought Gentoo was a distribution? Given the time it takes to use Gentoo maybe it should be considered a file manager. g For more info on gentoo the... filemanager:http://www.obsession.se/gentoo gnu/linux distribution: http://www.funroll-loops.org/ ;-) -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: 3rd-party package conflict in upgrade of RedHat?
On Fri, 2004-07-23 at 14:02, Greg Rundlett wrote: I'm upgrading from rh8 to fc2 and the install warns me that there are 3rd-party packages installed which overlap with packages included in fc2. If I wish to continue this may cause the packages to not work properly or other system stability issues. It tells me to see the Release Notes for more information, but I read the release notes and there is not mention of this circumstance. I wish it would tell me more about *which* packages are concerned. Unable to find any relevant info on google, I'm thinking it might just solve itself if I upgrade to RedHat 9, then FC2. I don't want to do a fresh install, because I'm not at all versed in restoring all my personal data and preferences, and don't want to hassle with it. I do have a backup of my data in case there are problems. Does anyone know how I would find out which 3rd-party packages FC2 is concerned with -- so that I might then uninstall them before the upgrade? I've not done that upgrade, but when you get the message, try switching to one of the other virtual consoles. The Red Hat installs display more information there and it may give you a clue. You could also try to figure out the offending package by running something like this: # rpm -q --queryformat '%{NAME} / %{DISTRIBUTION} / %{VENDOR} \n' -qa|grep -v Red Hat On one of my servers this is some of what I see: hpasm / (none) / Hewlett-Packard Company MySQL-server / (none) / MySQL AB j2sdk / (none) / Sun Microsystems DSDB / (none) / Altiris Inc. mxconsole / (none) / PolyServe, Inc. Then try removing those packages not provided by Red Hat. Or you could consider using debian. :-) -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: 3rd-party package conflict in upgrade of RedHat?
On Fri, 2004-07-23 at 14:02, Greg Rundlett wrote: I don't want to do a fresh install, because I'm not at all versed in restoring all my personal data and preferences, and don't want to hassle with it. I do have a backup of my data in case there are problems. A nice backup to another disk is always helpful when trying to restore configuration files. A while ago I put together an 130G external USB disk from pieces at CompUSA. Essentially a USB 2.0 external enclosure case and the cheapest large disk they had on sale. Now I use the following script to backup my laptop every morning when I get into work: #!/bin/bash mount /EXTERNAL echo Backing up /etc to /home/marc/Configs sudo rsync --progress -av /etc/ /home/marc/Configs/ echo Backing up /PHOTOS to /EXTERNAL/PHOTOS sudo rsync --progress -av /PHOTOS /EXTERNAL/ echo Backing up /home to /EXTERNAL/laptop-home sudo rsync --progress -av /home /EXTERNAL/laptop-home/ echo Backing up / to /EXTERNAL/laptop-rootpartition sudo rsync --progress -av -x / /EXTERNAL/laptop-rootpartition umount /EXTERNAL It is a little redundant. Both /home and /PHOTOS are copied to their own directories on the external disk as well as a copy under laptop-rootpartition. And the contents of /etc is copied twice too. There are other tools (mostly rsync + scripts) to keep dated versions without taking up a lot of space or tools that try to be smarter (unison). But I find rsync does the job. When the disk gets filled, I'll just clean it out some of the transient ISOs that got backed up to the external disk. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Live Free or ...D'oh!
On Tue, 2004-07-13 at 15:24, Michael ODonnell wrote: NH to tax chat rooms, IM and WWW mail? http://www.theunionleader.com/articles_showa.html?article=40593 State Backs Off Plan to Tax Internet http://www.nhpr.org/view_content/6809/ -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Revolution OS
On Wed, 2004-07-07 at 08:11, Andrew W. Gaunt wrote: I know this recommendation may be considered to be dated; especially since it harkens back 2002 which in geek years is a different epoch, but, I thought I'd mention it anyway. I've not read much chatter about it and did not see very many references in the GNHLUG mail archives. There is an 86 min film named OS Revolution which I was able to rent (on DVD) via Net Flix. It was defintely worthy of a Friday night's time in front of the TV (CRT sans keyboard) with a few beers. It is a documentary with many (not all) of the usual suspects talking about things we like to hear. I have a copy from some tradeshow (HP schwag) if anyone wants to borrow it. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: GNHLUG Nashua meeting, Tomorrow, June 22nd at Marthas
On Tue, 2004-06-22 at 13:26, Jon maddog Hall wrote: Havoc Pennington of Red Hat will be detailing Red Hat's road map for the desktop What: Red Hat's Desktop Road Map FYI I'm posted my notes here: http://www.nozell.com/cgi/blosxom/linux#20040623_red-hat-desktop-presentation-gnhlug -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Searching a site - including in PDFs and (ugh) DOCs?
On Thu, 2004-06-03 at 15:21, Bill Sconce wrote: Hi all - Does anyone know of a package which can provide a search capability for a Web site - including searching in PDF and .DOC files? How about namazu? For debian users, use: apt-get install namazu2 I've been using it on my laptop (mostly email and text) but it claims to support a bunch of file formats including Microsoft Office formats, PDF, gzip, etc. See the manual.html that comes with the kit for a complete list. -marc -- Marc Nozell ([EMAIL PROTECTED]) http://www.nozell.com/blog/ ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Can this be protected?
On Thu, Mar 25, 2004 at 02:27:44PM -0500, Tilly, Lawrence wrote: Now, I've heard of bots similar to what search engines use that crawl the web and scour for email addresses on web sites. Create a little gif or jpg image that displays your email address. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: Photo Album
On Thu, 2004-03-11 at 10:46, Cole Tuininga wrote: Hi all - I'm looking to replace my current web based photo album software as the current one has some security issues. Anybody have suggestions for or against any particular software? My feature requirements are that it be able to handle multiple albums, have sub albums/folders, and most importantly, needs to allow the viewer to choose the resolution they wish to view at. It would be nice if it also supported me being able to add comments to the pictures as well. I've found yappa-ng and r.i.g. that seem to do what I want, but I'm not familiar with either. Anybody have feedback or suggestions? I've been using 'zoph' for a few weeks and am pretty happy with it. That said, it is not accessible to anyone but me, but could be. Things I like about it: * web-based *and* command line interface * stores lots of meta data in MySQL -- photographer, people in the picture, location, date, all the exif stuff, mulitple user-defined categories, mulitple, user-defined albums... * different way to look at photos -- pictures of Spencer taken by Marc and date after 11-March-1999 and category is 'Destination Imagination' * Export to static photo albums - 'bins', 'albums' and zoph formatted HTML. Handy to burn for CD archives or give to non-internet relatives. * Light boxes, multiple users with difference privileges, user ratings of photos, etc... The project hasn't had a release in a while, but the developer is still around. I started with the version in debian/testing (apt-get install zoph), but have since pulled the latest files from their CVS tree. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog ___ gnhlug-discuss mailing list [EMAIL PROTECTED] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
Re: What's the best way to automatically swap smart hosts (sendmail)?
My laptop also travels between different networks (home, work-behind-firewall and work-not-behind-firewall). I set the smtp host for evolution (kmail, mozilla -mail, etc) to be: localhost:2525 and then use a network-appropriate script to forward the mail across ssh to a properly configured mail server. #!/bin/bash # connect-smtp-home # port 2525 - SMTP on home linux server ssh -f -C -L 2525:127.0.0.1:25 -l marc nozell.dyndns.org sleep 3600 #!/bin/bash # connect-smtp-work # port 2525 - SMTP on work desktop linux server ssh -f -C -L 2525:127.0.0.1:25 -l marc XXX.XXX.XXX sleep 3600 #!/bin/bash # connect-smtp-work-external # port 2525 - SMTP on work external linux server ssh -f -C -L 2525:127.0.0.1:25 -l nozell YYY.YYY.YYY sleep 3600 Don't know about mutt, but surely there is a way. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/blog pgp0.pgp Description: PGP signature
Re: Palm/Linux Database
On Fri, Jun 06, 2003 at 05:55:04PM +, [EMAIL PROTECTED] wrote: I would like to find an application(s) that would allow me to produce a database (s) for personal use, and to be able to access it from my Linux system, as well as some way to access it from my Palm Pilot. Anyone know of any such software available? Get pilot-db for the palm (http://pilot-db.sourceforge.net/) which can import and export CSV files. It is near trival to pull info out of MySQL/postgres in that format. -marc -- Marc Nozell [EMAIL PROTECTED] http://www.nozell.com/ pgp0.pgp Description: PGP signature