Re: INPUT/OUTPUT CONFIGURATION
You can just go to HMC and do a PCHID reassign from bad one to a good one in same or in another Escon Card. Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 21/07/2011 16:32, Sherry Everhart escreveu: Hello Everyone, I am interested in knowing how to configure a spare ESCON channel to our DASD so that if one of the existing eight shared channels goes belly-up (like it did last week) we can just move the cable over and not have to POR. I'm currently looking in the System z Input/Output Configuration Program User's Guide for ICP IOCP but I'm not sure what to look for. I keep getting this error when trying to add another channel: CHPID PCHID=160,PATH=(60),TYPE=CNC,SHARED CHPID PCHID=161,PATH=(61),TYPE=CNC,SHARED CHPID PCHID=162,PATH=(62),TYPE=CNC,SHARED CHPID PCHID=163,PATH=(63),TYPE=CNC,SHARED CHPID PCHID=166,PATH=(66),TYPE=CNC,SHARED CHPID PCHID=170,PATH=(70),TYPE=CNC,SHARED CHPID PCHID=171,PATH=(71),TYPE=CNC,SHARED CHPID PCHID=175,PATH=(75),TYPE=CNC,SHARED CHPID PCHID=176,PATH=(76),TYPE=CNC,SHARED CNTLUNIT CUNUMBR=0C00,PATH=(60,61,62,63,66,70,71,75,76),UNIT=3990,X UNITADD=((00,256)),CUADD=0 *ICP ICP115I DELIMITER ERROR, EXPECT RIGHT PARENTHESIS - ,76),UNI CNTLUNIT CUNUMBR=0D00,PATH=(60,61,62,63,66,70,71,75,76),UNIT=3990,X UNITADD=((00,256)),CUADD=1 *ICP ICP115I DELIMITER ERROR, EXPECT RIGHT PARENTHESIS - ,76),UNI CNTLUNIT CUNUMBR=0E00,PATH=(60,61,62,63,66,70,71,75,76),UNIT=3990,X UNITADD=((00,256)),CUADD=2 *ICP ICP115I DELIMITER ERROR, EXPECT RIGHT PARENTHESIS - ,76),UNI CNTLUNIT CUNUMBR=0F00,PATH=(60,61,62,63,66,70,71,75,76),UNIT=3990,X UNITADD=((00,256)),CUADD=3 *ICP ICP115I DELIMITER ERROR, EXPECT RIGHT PARENTHESIS - ,76),UNI IODEVICE ADDRESS=(0D00,256),CUNUMBR=(0C00), X UNIT=3380,UNITADD=00 IODEVICE ADDRESS=(0E00,256),CUNUMBR=(0D00), X UNIT=3380,UNITADD=00 IODEVICE ADDRESS=(0F00,256),CUNUMBR=(0E00), X UNIT=3390,UNITADD=00 IODEVICE ADDRESS=(1000,256),CUNUMBR=(0F00), X UNIT=3390,UNITADD=00 The error message states: IOCP expected a right parentheses as the first character of string . This error can occur if a keyword value contains too many characters or if more parameters than your CPC supports were specified. Is it possible to configure a spare channel for redundancy? Thanks for the help. Sherry E.
z10 HMC Automatic Activation Profiles
Hi List! In z10 HMC under Automatic Activation Profiles, I can found following MODES under Processor tag for each LPAR defined: ESA/390 - OK! It´s for traditional CP´s to run z/vm, z/vse and z/OS ESA/390 TPF - OK! I never saw a TPF system running... (forgot it) Coupling Facility: OK! Name already define what system should do. Linux Only: OK! It´s for IFL´s to rum z/vm and/or Linux on z. (no z/vse nor z/os under z/vm) Z/VM: When should I use this option? -- Carlos Bodra Sao Paulo - Brazil
z/OS 1.4 running under z/VM 5.4 over a z890
Hello. I need to prepare a migration from an old OS/390 2.5 to z/OS 1.4 over a z890 machine. Can I use z/VM 5.4 as host to a z/OS 1.4 guest? OS/390 2.5 will continue to run over a 9672 until all has been migrated to z/OS. z/OS 1.4 could run in compatibility mode or not, but this is another question to z/OS list. Thanks in advance -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil
z/VM RedHat Virtual Machine Memory abend
Hi s390x Gurus I´m new to Linux on z and we are conducting a POC test of Linux Red Hat with Oracle running under z/VM 5.4 RSU 1003 and a z/10 BC model A00 (IFL Only). If linux virtual machine is defined with 64G in directory we got an abend during startup (see below). Doing some tests I found that I can define it until 59G in directory (60794036k from TOP linux command) and it will startup correctly. My questions are: 1 - Is this a limitation of linux s390x or Red Hat distribution? 2 - Is this a linux s390x bug or Red Hat distribution? 3 - How can I circunvent this so we can continue with POC (Proof Of Concept)? Thanks in advance for all hints and tips about. 00: Booting default (2.6.18-194.8.1.el5)... Linux version 2.6.18-194.8.1.el5 (mockbu...@s390-002.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jun 23 11:09:16 EDT 2010 We are running under VM (64 bit mode) Detected 3 CPU's Boot cpu address 0 Built 1 zonelists. Total pages: 16777216 Kernel command line: root=LABEL=/ BOOT_IMAGE=0 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) *Memory: 65951564k/67108864k available* (3414k kernel code, 0k reserved, 2256k dat a, 136k init) Write protected kernel read-only data: 0x356000 - 0x409fff Calibrating delay loop... 2981.88 BogoMIPS (lpj=14909440) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 cpu 0 phys_idx=0 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 1 phys_idx=1 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 2 phys_idx=2 vers=FF ident=01F2D6 machine=2098 unused=8000 Brought up 3 CPUs migration_cost=1000 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a n initrd Freeing initrd memory: 2759k freed list_del corruption. prev-next should be 8001bff0, but was 8001 c840 kernel BUG at lib/list_debug.c:65! illegal operation: 0001 Ý#1¨ CPU: 0 Not tainted 2.6.18-194.8.1.el5 #1 Process swapper (pid: 1, task: c611f788, ksp: c6123b10) Krnl PSW : 040400018000 002685d6 (list_del+0x9e/0xcc) Krnl GPRS: 0015 c6123cb8 0026 0400 0012a83e 0733 000a 0050e400 0001 8001bf90 8001bff0 8001bfce 00369878 002685d2 c6123d10 Krnl Code: d2 07 10 08 20 08 e3 10 d0 08 00 04 e3 10 20 08 00 24 e3 10 Call Trace: (Ý002685d2¨ list_del+0x9a/0xcc) Ý0017820a¨ free_pages_bulk+0x9e/0x34c Ý0017868a¨ free_hot_cold_page+0x1d2/0x1f4 Ý001009c0¨ free_initrd_mem+0x8c/0xc8 Ý005944ee¨ free_initrd+0xba/0xe4 Ý0058e324¨ init+0x1a0/0x32c Ý0010558e¨ kernel_thread_starter+0x6/0xc Ý00105588¨ kernel_thread_starter+0x0/0xc 0Kernel panic - not syncing: Fatal exception: panic_on_oops 01: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 02: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 00: HCPGIR450W CP entered; disabled wait PSW 00020001 8000 0010BDBE -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil
Re: z/VM RedHat Virtual Machine Memory abend
Larry, We are running it z/VM 5.4 RSU 1003 (lastest), but problem is connected to Linux, because I changed MAINT user memory to 128GB and all runs fine. This machine has no CP´s just IFL´s processors. Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 20/04/2011 19:24, Davis, Larry (National VM/VSE Capability) escreveu: Are you Running VM on this or zLinux only on an LPAR? Larry Davis** *From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] *On Behalf Of *Carlos Bodra - Pessoal *Sent:* Wednesday, April 20, 2011 6:19 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* z/VM RedHat Virtual Machine Memory abend Hi s390x Gurus I´m new to Linux on z and we are conducting a POC test of Linux Red Hat with Oracle running under z/VM 5.4 RSU 1003 and a z/10 BC model A00 (IFL Only). If linux virtual machine is defined with 64G in directory we got an abend during startup (see below). Doing some tests I found that I can define it until 59G in directory (60794036k from TOP linux command) and it will startup correctly. My questions are: 1 - Is this a limitation of linux s390x or Red Hat distribution? 2 - Is this a linux s390x bug or Red Hat distribution? 3 - How can I circunvent this so we can continue with POC (Proof Of Concept)? Thanks in advance for all hints and tips about. 00: Booting default (2.6.18-194.8.1.el5)... Linux version 2.6.18-194.8.1.el5 (mockbu...@s390-002.build.bos.redhat.com mailto:mockbu...@s390-002.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jun 23 11:09:16 EDT 2010 We are running under VM (64 bit mode) Detected 3 CPU's Boot cpu address 0 Built 1 zonelists. Total pages: 16777216 Kernel command line: root=LABEL=/ BOOT_IMAGE=0 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) *Memory: 65951564k/67108864k available*(3414k kernel code, 0k reserved, 2256k dat a, 136k init) Write protected kernel read-only data: 0x356000 - 0x409fff Calibrating delay loop... 2981.88 BogoMIPS (lpj=14909440) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 cpu 0 phys_idx=0 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 1 phys_idx=1 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 2 phys_idx=2 vers=FF ident=01F2D6 machine=2098 unused=8000 Brought up 3 CPUs migration_cost=1000 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a n initrd Freeing initrd memory: 2759k freed list_del corruption. prev-next should be 8001bff0, but was 8001 c840 kernel BUG at lib/list_debug.c:65! illegal operation: 0001 Ý#1¨ CPU: 0 Not tainted 2.6.18-194.8.1.el5 #1 Process swapper (pid: 1, task: c611f788, ksp: c6123b10) Krnl PSW : 040400018000 002685d6 (list_del+0x9e/0xcc) Krnl GPRS: 0015 c6123cb8 0026 0400 0012a83e 0733 000a 0050e400 0001 8001bf90 8001bff0 8001bfce 00369878 002685d2 c6123d10 Krnl Code: d2 07 10 08 20 08 e3 10 d0 08 00 04 e3 10 20 08 00 24 e3 10 Call Trace: (Ý002685d2¨ list_del+0x9a/0xcc) Ý0017820a¨ free_pages_bulk+0x9e/0x34c Ý0017868a¨ free_hot_cold_page+0x1d2/0x1f4 Ý001009c0¨ free_initrd_mem+0x8c/0xc8 Ý005944ee¨ free_initrd+0xba/0xe4 Ý0058e324¨ init+0x1a0/0x32c Ý0010558e¨ kernel_thread_starter+0x6/0xc Ý00105588¨ kernel_thread_starter+0x0/0xc 0Kernel panic - not syncing: Fatal exception: panic_on_oops 01: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 02: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 00: HCPGIR450W CP entered; disabled wait PSW 00020001 8000 0010BDBE -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil
Re: z/VM RedHat Virtual Machine Memory abend
q stor STORAGE = 48G CONFIGURED = 48G INC = 128M STANDBY = 0 RESERVED = 0 Ready; T=0.01/0.01 20:33:09 No xstore defined. Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 20/04/2011 20:04, Davis, Larry (National VM/VSE Capability) escreveu: What is your Hardware Memory configuration for Main Storage and XSTORE for VM Larry Davis** *From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] *On Behalf Of *Carlos Bodra - Pessoal *Sent:* Wednesday, April 20, 2011 6:39 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: z/VM RedHat Virtual Machine Memory abend Larry, We are running it z/VM 5.4 RSU 1003 (lastest), but problem is connected to Linux, because I changed MAINT user memory to 128GB and all runs fine. This machine has no CP´s just IFL´s processors. Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 20/04/2011 19:24, Davis, Larry (National VM/VSE Capability) escreveu: Are you Running VM on this or zLinux only on an LPAR? Larry Davis *From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] *On Behalf Of *Carlos Bodra - Pessoal *Sent:* Wednesday, April 20, 2011 6:19 PM *To:* IBMVM@LISTSERV.UARK.EDU mailto:IBMVM@LISTSERV.UARK.EDU *Subject:* z/VM RedHat Virtual Machine Memory abend Hi s390x Gurus I´m new to Linux on z and we are conducting a POC test of Linux Red Hat with Oracle running under z/VM 5.4 RSU 1003 and a z/10 BC model A00 (IFL Only). If linux virtual machine is defined with 64G in directory we got an abend during startup (see below). Doing some tests I found that I can define it until 59G in directory (60794036k from TOP linux command) and it will startup correctly. My questions are: 1 - Is this a limitation of linux s390x or Red Hat distribution? 2 - Is this a linux s390x bug or Red Hat distribution? 3 - How can I circunvent this so we can continue with POC (Proof Of Concept)? Thanks in advance for all hints and tips about. 00: Booting default (2.6.18-194.8.1.el5)... Linux version 2.6.18-194.8.1.el5 (mockbu...@s390-002.build.bos.redhat.com mailto:mockbu...@s390-002.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jun 23 11:09:16 EDT 2010 We are running under VM (64 bit mode) Detected 3 CPU's Boot cpu address 0 Built 1 zonelists. Total pages: 16777216 Kernel command line: root=LABEL=/ BOOT_IMAGE=0 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) *Memory: 65951564k/67108864k available*(3414k kernel code, 0k reserved, 2256k dat a, 136k init) Write protected kernel read-only data: 0x356000 - 0x409fff Calibrating delay loop... 2981.88 BogoMIPS (lpj=14909440) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 cpu 0 phys_idx=0 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 1 phys_idx=1 vers=FF ident=01F2D6 machine=2098 unused=8000 cpu 2 phys_idx=2 vers=FF ident=01F2D6 machine=2098 unused=8000 Brought up 3 CPUs migration_cost=1000 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a n initrd Freeing initrd memory: 2759k freed list_del corruption. prev-next should be 8001bff0, but was 8001 c840 kernel BUG at lib/list_debug.c:65! illegal operation: 0001 Ý#1¨ CPU: 0 Not tainted 2.6.18-194.8.1.el5 #1 Process swapper (pid: 1, task: c611f788, ksp: c6123b10) Krnl PSW : 040400018000 002685d6 (list_del+0x9e/0xcc) Krnl GPRS: 0015 c6123cb8 0026 0400 0012a83e 0733 000a 0050e400 0001 8001bf90 8001bff0 8001bfce 00369878 002685d2 c6123d10 Krnl Code: d2 07 10 08 20 08 e3 10 d0 08 00 04 e3 10 20 08 00 24 e3 10 Call Trace: (Ý002685d2¨ list_del+0x9a/0xcc) Ý0017820a¨ free_pages_bulk+0x9e/0x34c Ý0017868a¨ free_hot_cold_page+0x1d2/0x1f4 Ý001009c0¨ free_initrd_mem+0x8c/0xc8 Ý005944ee¨ free_initrd+0xba/0xe4 Ý0058e324¨ init+0x1a0/0x32c Ý0010558e¨ kernel_thread_starter+0x6/0xc Ý00105588¨ kernel_thread_starter+0x0/0xc 0Kernel panic - not syncing: Fatal exception: panic_on_oops 01: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 02: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop from CPU 00. 00: HCPGIR450W CP entered; disabled wait PSW 00020001 8000 0010BDBE -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil
Re: z/VM RedHat Virtual Machine Memory abend
Thanks a lot for hints. Barton, and others, I will redifine storage areas to get xstore. I can add more 2 or 3 3390-3 page volumes. Today there is only one volume for page and one for spool. Please keep in mind, that this is a no production z10 installed in our data center just for POC tests, so I can change definitions very very fast. I will do changes next monday and return here with results. Thanks again and Happy Easter for all!!! Carlos Bodra On Qua 20/04/11 22:52 , David Boyes dbo...@sinenomine.net sent: Check the amount of paging space you have defined for the VM system. Is this a brand new VM install right out of the box? If so, then this is most likely to be the problem. 48G of real, plus the default paging areas in a brand new VM install add up to just about 52G or so, depending on whether you used mod 3 or mod 9s. It works for MAINT because CMS is extremely memory efficient; it doesn’t require that every page in the virtual machine definition be actually present when it IPLs, and it touches only what it actually needs. Linux touches every page at some point, so you need enough paging space to support the total size of all the virtual machines you define, plus a little bit of insurance. Add at least 3-4 mod 9 or mod 27s as paging space and see if the problem goes away.
IBM Announcements Today
http://www-01.ibm.com/common/ssi/ShowDoc.jsp?docURL=/common/ssi/rep_ca/8/897/ENUS111-078/index.htmlbreadCrum=DET001PT022url=buttonpressed=DET001PT116page=1000paneltext1=DET001PEF011user+type=EXTlang=en_USInfoType=ANInfoSubType=CAInfoDesc=Announcement+Letterspanelurl=index.wss%3Fbuttonpressed%3DDET001PT116%26page%3D1000%26paneltext1%3DDET001PEF011%26user%2Btype%3DEXTpaneltext=Announcement%20letter%20search Windows will run on zEntreprise zBX. -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: RSU, PSP - which do I choose?
Sherry Order PTF UV97540 and you will got lastest RSU for z/VM 5.4. (1008) I did it eletronically and applied it a couple of days ago and a lot of PSP reported ptfs was installed. You can use Auomated Installation and Service (I never tried!) or Service Guide (I used this, since I working with VM since 1980!) Defenitly if you have a z10 machine you should apply RSU. Good luck and enjoy. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 10/03/2011 12:12, Dave Jones escreveu: Hi, Sherry. Congratulations on getting z/VM 5.4 installed! What you should do next is order the latest z/VM 5.4 RSU (it's 5408RSU dated October 29, 2010) from the z/VM web site and install that on top of 5.4. How to do that is described in Chapter 14 of the z/VM: Guide for Automated Installation and Service publication. Have a good one. DJ On 3/10/2011 9:02 AM, Sherry Everhart wrote: I have installed our z/VM 5.4 system (YAY!). It came with RSU 5404 from June 2009, so that’s what I installed. It has not yet been migrated. Now I read the part in the z/VM Program Directory that says, “…you should see if you received the most current Stacked RSU available. If there is a higher RSU available, or if you did not receive an RSU with your order and there is now one available, you should order it and apply it when you install z/VM.” Well, since this is my first solo z/VM installation, I’m not quite sure what I should do at this point to bring it completely up-to-date prior to the migration steps. Should I: 1. Order the latest stacked RSU (and then what… start over with the installation?) 2. Order the PSP “buckets” for the three products we use whose SERVLVL is higher, and apply just that service? Suggestions? Be gentle... the expert at anything was once a beginner. :) Thanks. Sherry E.
DFSMS and zVM
Hello I was checking how z/vm 5.4 supports 3592-E05 (TS1120) installed into a library 3577-L5U. I have a 3592-C06 ficon attachment to connect z10 to tape drive. I can load, write, read and unload cartridge using 3577-L5U operator panel. I was unable to find out how to tell to z/vm to pick up cartridge into slot, move it to drive 1 (for example) or how to automate process to return cartridge from tape drive to slot after operation (read/write) was finished. Cartridge unload, but I need to use operator panel to move it from drive to slot library. Thanks for all comments. -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: Z/vm 5.4 on z890 and migrated to z10 problem
If you have access to shopzseries our ibmlink(servlink) check PSP for 2098Device. If you z/vm is at 1003 level you will need to apply about 13 ptfs that isn´t included in RSU. I did this just a week ago upgrading from 0903 level running in z890 to 1003 to run in z10-BC. Now working in 2107Device for zvm 5.4 1003 and following 3592Device. A lot of fun!!! Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 22/02/2011 14:50, Hughes, Jim escreveu: We moved our z/VM 5.4 system from a z890 to a z10. Everything on the z890 was running well. The Multiple SSL Server Support was working too. Once we moved to the z10 by doing a cable swap, the Multiple Server Support for our SSL connections failed to operate. The SSL worker machines were getting 0C1 abends. In the interest of time, we modified things to avoid using SSL. Are there updates required to our z/VM 5.4 system when moving to a Z10 for Multiple SSL Server Support to work? Our initial investigation did not reveal any requirement. Thanks in advance. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system.
Information
How can I readout these Machine Check occurring in a MP3000 running zVm 4.40 07:13:06 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B 07:13:06 System operation continues. 07:53:45 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B 07:53:45 System operation continues. 07:53:45 Reporting will be suspended temporarily because machine checks are occurring too frequently. There are no problem reported and CE says that machine is ok. How can I interpret MCIC code showed? -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
EREP dump readout for MCIC
Hi listners. I was checking erep output to try to discover more about MCIC (Machine Check Interruption Code) and found following register, but I checked 02 Erep manuals, (User´s Guide Manual and Reference Manual), but can´t found any description how to readout these little dump. We are running z/vm 4.40 over MP3000 (soon z10 BC), but until there, I need to discover what means External Damage in MCIC code. If I remember in the past, we had some manuals called Logic Manuals, but I can´t located it for Erep. If anyone can tell me where I can found documentation about these dump, I will say Thank You! MODEL-7060 SERIAL NO- 071002 --- RECORD ENTRY SOURCE - MCH VM/ESAV4 R0 DAY YEAR HH MM SS.TH DATE- 285 10 TIME- 03 52 06 78 PROGRAM IDENTITY- @ JOB IDENTITY- OLD MACHINE CHECK PSW - 03 3C 00 00 80 21 09 14 HEX DUMP OF RECORD HEADER107018000010285F03520678 170710027060027C 033C80210914 0030 04000F3D40030004 0050 0070 0090 4040404040404040 00B0 40404040404040404040404040404040 40404040404040404000000F 00D0 0009D3800304 00D65B862C205000 00F0 20001000002107F08000 800014B1EE40004DB07F 0110 5B9D30805B9D3040 C8005B662124 0130 5BA2E7615B860101 1F00 0150 0170 0190 01B0 01D0 01F0 0210 0230 0250 0270 0037 00010400004000C07FFE74B4 0290 716508C0C6B73AF49CF658C004000F3D 40038000C6B725338021091404000F3D 02B0 40038000C6B72559802108E404000F3D 40038100C6B72E838019244204000F3D 02D0 40038000C6B731CA8021091404000F3D 40038000C6B73AF480210914 02F0 RECORD TYPE - 10 -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
ESS800 Configuration
Hi We are in process to configure some area of our 2105-800 to be used by open systems. We start process and when we try to building host access (option modify host), we got in ESS Specialist console following message: ERROR 1199 Information server problem. An unknown server error occurred. Try again. If problem persists call service representative. Service representative was called and checked out machine. No errors found. Machine is working well with Escon/Ficon adapters. We already try to do same definition a lot of times using both clusters, any kind of host (as400, RS6000, Linux z etc..) Any hint about? -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
FCP and z10
Hi listners, Just to tell that we get out 2105-F20 connected to z10 BC via FCP this weekend via switch 2005-B16. Seems that we have a problem with 2105-800 that we was trying to connected earlier. We will check ESS800 to find what is wrong. Thanks for all that send tips and hints. -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: z10 shark 800 and FCP
Robert, Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used to test access to intel, so zonned is working ok. I can´t bring up a linux image, since I´m not able to define storage to be used by this image. My problem is before try to bring up zvm 5.4 or linux under it. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 27/09/2010 12:00, Robert J Brenneman escreveu: Is the 2109 zoned to allow the z10 to access the storage device? Did you IPL a linux guest or LPAR and use it to drive a fabric login or fabric discovery ? The ESS and DS4700 will only show you the hosts which have contacted them, since they don't do discovery of the host systems. The z10 will not drive any discovery actions in the SAN by itself ( unlike other platforms ) You have to bring up a Linux image and do a SAN fabric / device scan or attempt to configure the FCP storage from z/VM.
z10 shark 800 and FCP
Hi I´m trying to connect a z10 to a shark using FCP protocol, but without success. We did some tests that are describe below: 1 - Connect z10 to shark 800 sw2 adapter with both sides defined as Ficon. Works fine 2 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP. Direct connection, no switch envolved. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. After reading some material (redbooks) we found information about that a direct connection didn´t work. Is mandatory use a switch. 3 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP and using an old IBM 2109-S16. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. 4 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP and using an IBM 2005-B16. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. 5 - Connect z10 to DS4700 via FC adapter with z10 define as FCP and storage defined as FC and using an old IBM 2109-S16. Didn´t work. We aren´t able to access open dasd. We checked microcode level for shark and seems to be ok. If I connect shark or DS4700 to an intel server, we are able to access open dasd without problems. Since z10 with FCP access is new for us, any hint or tip about are welcome. Thanks in advance. -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: z10 shark 800 and FCP
Ray, Sorry for a not so clear definition. What happens is that we are trying to define Open System Storage in ESS800 and when we try to allocate dasd space to z10 (open space using FCP defined ports), ESS800 didn´t able to complete configuration, so I can´t define a volume inside this space. zvm was installed in eckd disks as traditional zvm does, but I´n not trying to ipl from fcp dasd yet, since I was not able to define it yet. Problem seems to be something missing in definitions or wrong sequence. As I describe in previous email, ports (at ess800 and z10) and fibre cable are ok, since if I chance ports to Ficon protocol all works fine. A question arrised now: ports are SX (shot wave) in both sides, cable could be same used for Ficon? Or FC demands a specific cable? Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 27/09/2010 12:29, Raymond Higgs escreveu: Carlos, What do you mean by My problem is before try to bring up zvm 5.4 or linux under it.? I'm confused. Are you trying to SCSI IPL vm? If you installed a vm system onto ECKD storage on an ESS800, then you have to IPL it with your ficon channels. If you have a scsi vm system, then use the fcp info that you installed with. Ray Higgs System z FCP Development Bld. 706, B24 2455 South Road Poughkeepsie, NY 12601 (845) 435-8666, T/L 295-8666 rayhi...@us.ibm.com The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU wrote on 09/27/2010 11:12:03 AM: Carlos Bodra - Pessoal cbo...@terra.com.br Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 09/27/2010 11:12 AM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z10 shark 800 and FCP Robert, Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used to test access to intel, so zonned is working ok. I can´t bring up a linux image, since I´m not able to define storage to be used by this image. My problem is before try to bring up zvm 5.4 or linux under it. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 27/09/2010 12:00, Robert J Brenneman escreveu: Is the 2109 zoned to allow the z10 to access the storage device? Did you IPL a linux guest or LPAR and use it to drive a fabric login or fabric discovery ? The ESS and DS4700 will only show you the hosts which have contacted them, since they don't do discovery of the host systems. The z10 will not drive any discovery actions in the SAN by itself ( unlike other platforms ) You have to bring up a Linux image and do a SAN fabric / device scan or attempt to configure the FCP storage from z/VM.
Re: z10 shark 800 and FCP
Ray, Just to clarify, can I connect directly z10 port defined as FCP (IOCP) to a ESS800 SW2 defined FCP? (no switch needed) Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 27/09/2010 12:20, Raymond Higgs escreveu: Carlos, z10 with ESS800 should work fine point-to-point. That config was tested a lot here in Poughkeepsie. We don't have a ds4700. It should work though. There is some configuration that needs to be done inside linux. You need to tell linux which busid (device number), target wwpn, and lun to use. If you are using Suse, yast has a nice setup wizard. Have you done any configuration inside of Linux? The output of lszfcp -D, and lsscsi would be helpful. If you are using edevs, then you need to tell vm which device number, target wwpn, and lun to use. Regards, Ray Higgs System z FCP Development Bld. 706, B24 2455 South Road Poughkeepsie, NY 12601 (845) 435-8666, T/L 295-8666 rayhi...@us.ibm.com *Carlos Bodra - Pessoal cbo...@terra.com.br* Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 09/27/2010 10:53 AM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject z10 shark 800 and FCP Hi I´m trying to connect a z10 to a shark using FCP protocol, but without success. We did some tests that are describe below: 1 - Connect z10 to shark 800 sw2 adapter with both sides defined as Ficon. Works fine 2 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP. Direct connection, no switch envolved. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. After reading some material (redbooks) we found information about that a direct connection didn´t work. Is mandatory use a switch. 3 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP and using an old IBM 2109-S16. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. 4 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP and using an IBM 2005-B16. Didn´t work. We aren´t able to define open system storage in ESS Specialist. Seems that shark doesn´t see FCP adapter in z10. 5 - Connect z10 to DS4700 via FC adapter with z10 define as FCP and storage defined as FC and using an old IBM 2109-S16. Didn´t work. We aren´t able to access open dasd. We checked microcode level for shark and seems to be ok. If I connect shark or DS4700 to an intel server, we are able to access open dasd without problems. Since z10 with FCP access is new for us, any hint or tip about are welcome. Thanks in advance. -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: z10 shark 800 and FCP
Hi Alan, Yes, I changed IOCDS and did a power on reset. Since this machine isn´t in production, I can do POR as I need. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 27/09/2010 14:03, Alan Altmark escreveu: On Monday, 09/27/2010 at 12:55 EDT, Carlos Bodra - Pessoal cbo...@terra.com.br wrote: As I describe in previous email, ports (at ess800 and z10) and fibre cable are ok, since if I chance ports to Ficon protocol all works fine. A question arrised now: ports are SX (shot wave) in both sides, cable could be same used for Ficon? Or FC demands a specific cable? You say that it works ok if you change the *ports* to FICON. Did you remember to change (and activate) the IOCDS to define the chpid as TYPE=FCP instead of TYPE=FC? Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 alan_altm...@us.ibm.com IBM Endicott
Re: z/VM 4.4 and Newer DASD Controllers
Hi Scott We have a z10 BC (2098-K01) running native with IBM 2105 Model F20 (3390-3 and 3390-9 volumes) and IBM 2105 Model 800 (3390-3 and 3390-9 volumes) without problems. They are connected to z10 via 2 Ficon (primary path) and 04 Escon (backup propose only - even I never used it, but tested it during initial installation). z/vm 4.4 is running ate rsu level 0601 (lastest for this version). I hope this help you. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 03/09/2010 13:55, Wandschneider, Scott escreveu: Does anybody know or know where I could find out if z/VM 4.4 running native on a 2066-0A2 CEC will support DASD controller model 2105 and/or 2107? Thank you, Scott R Wandschneider Senior Systems Programmer|| Infocrossing, a Wipro Company || 11707 Miracle Hills Drive, Omaha, NE, 68154-4457|| : 402.963.8905 || :847.849.7223 || : scott.wandschnei...@infocrossing.com **Think Green - Please print responsibly** Confidentiality Note: This e-mail, including any attachment to it, may contain material that is confidential, proprietary, privileged and/or Protected Health Information, within the meaning of the regulations under the Health Insurance Portability Accountability Act as amended. If it is not clear that you are the intended recipient, you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this e-mail, including any attachment to it, is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.
Code names for zSeries
Warning: This email was cross posted to IBM-MAIN, IBMVM and VSE-L Lists. As z196 has a code name of *Gryphon* before announcement, other zSeries has similar names, as *T-Rex* (z990??) *Pterodactylus*/ (z890???) Anyone has all family names? z900 - z800 - z990 - /*T-Rex*/ z890 - /*Pterodactylus* /z9 - z10 - z196 - /*Gryphon*/ **/ -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Re: Moving on (please don't panic)
Good luck and thanks for your support over all these years! Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 02/09/2010 11:48, Alan Altmark escreveu: Effective September 16th, after nearly 28 years in VM Development, I am moving to a new role as a member of IBM Lab Services and Training. There I will be part of the team that helps you, our clients, successfully bring Linux to System z, both from a traditional consolidation perspective, as well as exploitation of System z and z/VM's emerging technologies. I don't make the move lightly or easily, but it serves both my own goals and IBM's. I will continue to reside in Endicott with my friends in Development, I will still annoy them with questions, and I will continue to exert my influence over product plans. By being in Lab Services, however, those questions and that influence will hopefully be the result of deeper, more direct experience with you. While I'm here, let me pause to again publicly thank my colleagues for their many years of support. They always have taken the time to educate me (over and over sometimes!) so that I can pass that knowledge on to you. I will continue to hang out here and I will still see you at conferences. What *will* change? Well, I'll be on the road more, so you'll get fewer near-real-time answers from me on the listservers. (sigh) Oh, and I'll be making more recommendations that you get a Services contract with Yours Truly and the Chuckster to help you. (Hmmm do I get to charge twice?) :-D See you in the funny papers. Alan Altmark IBM z/VM Development (for 14 more days)
Re: Running back level VSE on a z/10 with VM6.1
I got zap from VSE Lab and applied it under a VSE 2.3.1 and already did a operation and load test running under a z/vm 4.4 0601 Level (lastest for 4.4) over a brand new z10. Email me off list if you need details. Carlos On Seg 30/08/10 17:20 , Yosua, Sara sara.yo...@baltimorecity.gov sent: Although it is obviously not supported, does anyone know of any technical reason why a back level VSE/ESA 2.2 guest would not IPL and run under z/VM 6.1 on a z/10 ? Thank you for any feedback. Sara E Yosua
Re: 3592 Tape Question
Hi Sergio, Unless you have 3592 drive installed into a 3494 or 3584 you can´t use it as a library if installed in a 3577-L5U. This unit is recognized as library only for open systems, not for mainframe. Drive units 3592 installed into a 3577 L5U are recognized by mainframe systems as standalone drives, even 3577-L5U being a library. Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 23/08/2010 09:58, Sergio Lima escreveu: Hello List, We have a 3592 machine here, that need have set to LIBRARY=YES . This parameter don't exist under IOCP of VM, and we need use like something HCD under VM to do this. Anybody already had this problem before? Thanks, Sergio Lima Costa.
Re: Report CPU utilization under Z/VM
Sergio, Hello. Good to listen from you. If your z/vm is 5.4 or 6.1 VM Perf Tool Kit is installed in basic restore (initial ddr) as a feature, but not enable. Its a priced feature, so implies in licensing it from IBM. It´s a very good monitor, a mix of old RTM/ESA and MONITOR. If you run linux under z/vm it has a good web interface and you can see a lot of information of linux machines. Have fun... Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil Em 17/08/2010 18:00, Sergio Lima escreveu: Hello List, We wrote a sample EXEC here, with the Help of this list (of course), that gove a CP IND commands from time to time (each 5 minutes), and then write this data on a CMS file. This process run very well, because We can see the CPU utilization from all times of the day (Online , and Batch at midnigth). But, We also have here, the VM Performance Tools, and now, the boss here, ask, if is not possible get a report from this Product, and if this is better. So, We are putting this question here for apreciate by gurus VM, and , see what is the better. If someone understand that VM Performance Tools is the better, have a way for us extract data from there? Thanks very much, Sergio Lima Costa São Paulo - Brazil
OSA-ICC
Hi Folks! I just can put my hands in a brand new z10 BC and all it's new features. Previuos machine was an MP3000 H50. I was checkin about new features and one that comes up at 1st requirement is to configure and use OSA-ICC, so I can put 02 old 3174 22L out of service and remove them from room. I was checking OSA-ICC Users Guide, but read it demand some time, so let me ask if anyone here has a cookbook fo how to configure it. If I undestood correctly, I should setup a closed lan between stations that will have access as console, is this right? Can I use HMC as a station to have these sessions? In other words, all hints and tips will be welcome. Thanks in advance Carlos Bodra
Replacing old solution OpenConnect SNA Printer Server
Hello Since now I have a brand new z10 with 02 IFL processors available, I can looking for a solution to replace old solution based in OpenConnect SNA Printer Server that runs in an old IBM RS/6000 7009-C10. Anyone has hint about how can I using Linux in z10 replace this solution? We run zVM and VSE. Details about this old solution can be found at: www.oc.com/legacymodernization/pdf/PrintWhite.pdf Thanks Carlos Bodra
Device type and model
Hello Listners I have following situation as response of Q DASD DETAILS Q DASD DETAILS 300 CUTYPE = 3990-E9 DEVTYPE=3390-0A Q DASD DETAILS A00 CUTYPE = 3990-CC DEVTYPE=3390-0C Q DASD DETAILS B00 CUTYPE = 3990-E2 DEVTYPE=3390-0A Address 300 is a volume in IBM 2105-800 Address A00 is a volume in OEM 3990 like Address B00 is a volume in IBM MP3000 Internal Disk My question is what means (models) 3990-E9/CC/E2 and 3390/0A/0C? Or better question, where can I found these codes? -- Carlos Bodra IBM zSeries Certified Specialist Sao Paulo - Brazil
Saga continues..
Hi... After got fix from Ingolf Salm for VSE/ESA runs under z10 BC, saga continues. Customer has MP3000 7060-H50 with internal disks. They are formated as 3390-3 only. Since DS6000 Interoperability matrix show that z/VM 4.4.0 is supported, no problem on zVM side. My question now is: Will VSE/ESA 2.3.1 support volumes defined on DS6800 (all 3390-3 - no large volumes). Any hint about? Thanks in advance for comments. Carlos Bodra
Re: Saga continues..
Benedict, As posted by other member, fix for z10 can be got from IBM Lab. DS6800 matrix is avalable at http://www-03.ibm.com/systems/resources/systems_storage_disk_ds6000_pdf_interop.pdf page 25/26. Carlos Em 18/5/2010 14:34, Benedict, Martin escreveu: I'd like to see both the matrix showing vm support and the informatio for the vse fix. Sent from my blackberry - Original Message - From: The IBM z/VM Operating SystemIBMVM@LISTSERV.UARK.EDU To: IBMVM@LISTSERV.UARK.EDUIBMVM@LISTSERV.UARK.EDU Sent: Tue May 18 13:28:37 2010 Subject: Saga continues.. Hi... After got fix from Ingolf Salm for VSE/ESA runs under z10 BC, saga continues. Customer has MP3000 7060-H50 with internal disks. They are formated as 3390-3 only. Since DS6000 Interoperability matrix show that z/VM 4.4.0 is supported, no problem on zVM side. My question now is: Will VSE/ESA 2.3.1 support volumes defined on DS6800 (all 3390-3 - no large volumes). Any hint about? Thanks in advance for comments. Carlos Bodra
z/vm 4.4 and vse 2.3.1 running in a z10 BC
Hello We have a chance to migrate our hardware from MP3000 H50 running vse/esa 2.3.1 under z/vm 4.4.0 to a new z10 BC machine. Since we have a lot of CA tools, under z/vm and vse, we need to replace machine as soon as possible and after migrate systems to z/vm 5.4 (z/vm 6.0??) and z/vse 4.2, but, this will demand a greater effort. My questions is simple, can I just shutdown systems, (vm and vse) replace H50 by z10 BC and up systems again? Of course, I will ask to CA a new LMP Key for new serial of BC machine. Will z/vm 4.4 and vse 2.3.1 runs error free (as today under H50) on z10 BC? Thanks a lot for comments Carlos Bodra
Re: Question about VSE List
Hi Sergio, VSE-L list stil exists and is very active. http://www.lehigh.edu/~wsm0/vse-l/ Carlos Bodra On Ter 9/03/10 18:09 , Sergio Lima sergiovm...@hotmail.com sent: Hello List. Someone know, the address (if still exist) from VSE ? Thanks very much Sergio Lima Costa Sao Paulo - Brazil - Transforme-se em personagens engraçados. Conheça o novo site de I Love Messenger. [1]
RSU installation
Hello, I just installing z/vm 5.4 in an z890. Im installing from DVD located into hmcs machine. No problem to install it. After long time without doing this kind of task, I can see that documentation now is much more detailed. My problem now is to install RSU and complete z/vm install. I downloaded from ibmlink rsu pack for z/vm 5.4. What I need to do now is ftp files rlst and pftpx to my z/vm 4.4, deterse them and record a dvd. My doubts are: 1 - how can I ftp both files to z/vm 4.4 and define lrecl 1024 and recfm f, since if I do not specify nothing during ftp they are ftped to A mdisk as V and 8192. 2 - Deterse just works if files are F and 1024? 3 - Using Nero as burning software to record DVD, what kind of extension I should use? iso image? data files? Thanks a lot Carlos Bodra
Re: RSU installation
Hi Alan These instructions are missing Have you a copy of them? Thanks Carlos Alan Altmark escreveu: On Wednesday, 01/27/2010 at 11:26 EST, Carlos Bodra cbo...@terra.com.br wrote: I downloaded from ibmlink rsu pack for z/vm 5.4. What I need to do now is ftp files rlst and pftpx to my z/vm 4.4, deterse them and record a dvd. My doubts are: 1 - how can I ftp both files to z/vm 4.4 and define lrecl 1024 and recfm f, since if I do not specify nothing during ftp they are ftped to A mdisk as V and 8192. 2 - Deterse just works if files are F and 1024? 3 - Using Nero as burning software to record DVD, what kind of extension I should use? iso image? data files? The instructions for ftping those files to VM were included in the e-mail you received from the order system. Alan Altmark z/VM Development IBM Endicott
Re: z/VM V5R4.0 dISABLED WAIT PSW 9051
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/hcsb4b31/3.1.4.197?ACTION=MATCHESREQUEST=9051TYPE=FUZZYSHELF=hcsh2aa1DT=20081201121442CASE=searchTopic=TOPICsearchText=TEXTsearchIndex=INDEXrank=RANKScrollTOP=FIRSTHIT#FIRSTHIT Crispin Hugo escreveu: Trying to IPL one of our z/VM 5.4 systems and get disabled wait PSW 0002 9051 I can't find reference to what 9051 is and what may have caused it. Any help please **Crispin Hugo** **Systems Programmer** **Macro 4 Ltd** Direct Line: +44 (0)1293 872121, Switchboard: +44 (0)1293 872000, Fax: +44 (0)1293 872001 **A Division of the UNICOM Group of Companies** www.macro4.com http://www.macro4.com/ Macro 4 Registered office :The Orangery, Turners Hill Road, Worth, Crawley, West Sussex, RH10 4SS Registered in England no. 927588 Please consider the environment and THINK before you print this email. Email Disclaimer http://www.macro4.com/emaildisclaimer.html -Original Message- *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Michael Forte *Sent:* 15 December 2008 22:03 *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* z/VM V5R4.0 Information Center - December 2008 edition Good morning, afternoon, or evening: The z/VM V5R4.0 Information Center on the Internet has been updated to include the latest product documentation for the recent release of z/VM V5R4.0 service and feature enhancements. The z/VM V5R4.0 Information Center (December 2008 edition) is available on an IBM Web site: http://publib.boulder.ibm.com/infocenter/zvm/v5r4/index.jsp. If you have a comment or if you experience any problems using the information center, please use the Contact z/VM link at the top or bottom of the page in question. If you have forgotten what an information is, read on. z/VM V5R4.0 Information Center - December 2008 IBM publishes the z/VM documentation in an information center using the IBM Eclipse Help System framework. Publishing in an information center is in addition to z/VM product documentation published in BookManager and PDF format and available through the z/VM Collection and z/VM Internet Library. The content of the z/VM V5R4.0 Information Center (information for the z/VM base and optional features) is identical to that in the traditional BookManager and PDF formats; however, the presentation might differ to some degree. Information centers provide a new mechanism for delivering product documentation. Advantages of information centers are: -- Content is indexed by Google and other internet search engines to help locate information more easily. -- Custom searches can be created that include only the information you need for a particular task or job role. Thank you, *Michael J. Forte* z/VM ID and POK Softcopy Support Software Engineer, System z Information Solutions 58HA IBM Poughkeepsie, New York_ _mjfo...@us.ibm.com mailto:mjfo...@us.ibm.com Office: 845-435-9062, T/L: 295-9062 Fax: 845-432-9405 P181, 2455 South Road, Poughkeepsie, NY 12601 Building 052, B09 Often those who work the hardest are the luckiest... This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 plc internal virus protection system. - This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 internal virus protection system. - -- Carlos Alberto Bodra VM/VSE System Consultant Sao Paulo - Brazil
Re: z/VM V5R4.0 dISABLED WAIT PSW 9051
*HCP2468E* *FlashCopy* *relationships* *on* *CP-OWNED* *volume* volser *on* *device* rdev*,* |*cylinders* n *through* n*,* *have* *been* *terminated.* | *Explanation:* CP does not allow persistent FlashCopy relationships to | exist on PAGE, SPOOL, DRCT, PARM, TEMP, Checkpoint, or Warmstart areas. | *System* *Action:* The system attempts to terminate the offending | relationships. System operation stops with subsequent wait state code | */_9051_/*. | *User* *Response:* IPL the system again. Refer to message HCP9051W for more | information. Crispin Hugo escreveu: Trying to IPL one of our z/VM 5.4 systems and get disabled wait PSW 0002 9051 I can't find reference to what 9051 is and what may have caused it. Any help please **Crispin Hugo** **Systems Programmer** **Macro 4 Ltd** Direct Line: +44 (0)1293 872121, Switchboard: +44 (0)1293 872000, Fax: +44 (0)1293 872001 **A Division of the UNICOM Group of Companies** www.macro4.com http://www.macro4.com/ Macro 4 Registered office :The Orangery, Turners Hill Road, Worth, Crawley, West Sussex, RH10 4SS Registered in England no. 927588 Please consider the environment and THINK before you print this email. Email Disclaimer http://www.macro4.com/emaildisclaimer.html -Original Message- *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Michael Forte *Sent:* 15 December 2008 22:03 *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* z/VM V5R4.0 Information Center - December 2008 edition Good morning, afternoon, or evening: The z/VM V5R4.0 Information Center on the Internet has been updated to include the latest product documentation for the recent release of z/VM V5R4.0 service and feature enhancements. The z/VM V5R4.0 Information Center (December 2008 edition) is available on an IBM Web site: http://publib.boulder.ibm.com/infocenter/zvm/v5r4/index.jsp. If you have a comment or if you experience any problems using the information center, please use the Contact z/VM link at the top or bottom of the page in question. If you have forgotten what an information is, read on. z/VM V5R4.0 Information Center - December 2008 IBM publishes the z/VM documentation in an information center using the IBM Eclipse Help System framework. Publishing in an information center is in addition to z/VM product documentation published in BookManager and PDF format and available through the z/VM Collection and z/VM Internet Library. The content of the z/VM V5R4.0 Information Center (information for the z/VM base and optional features) is identical to that in the traditional BookManager and PDF formats; however, the presentation might differ to some degree. Information centers provide a new mechanism for delivering product documentation. Advantages of information centers are: -- Content is indexed by Google and other internet search engines to help locate information more easily. -- Custom searches can be created that include only the information you need for a particular task or job role. Thank you, *Michael J. Forte* z/VM ID and POK Softcopy Support Software Engineer, System z Information Solutions 58HA IBM Poughkeepsie, New York_ _mjfo...@us.ibm.com mailto:mjfo...@us.ibm.com Office: 845-435-9062, T/L: 295-9062 Fax: 845-432-9405 P181, 2455 South Road, Poughkeepsie, NY 12601 Building 052, B09 Often those who work the hardest are the luckiest... This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 plc internal virus protection system. - This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 internal virus protection system. - -- Carlos Alberto Bodra VM/VSE System Consultant Sao Paulo - Brazil
Re: WAIT STATE
its missing console address. In other words, console address could be different from real to system generated. IF you are running zVM 4.4 or superior, it is redirect console for SE or HMC Software Messages Screen. Good luck Carlos Martin, Terry R. (CMS/CTR) (CTR) escreveu: Hi I am trying to bring up a new VM LPAR and I am receiving a DISABLED WAIT STATE CODE: 1010. Any ideas? //Thank You,// //Terry Martin// //Lockheed Martin - Information Technology// //z/OS z/VM Systems - Performance and Tuning// //Cell - 443 632-4191// //Work - 410 786-0386// //[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]//
Re: WAIT STATE
You can force a console address. In LOAD screem, type into LOADPARM field a known 3270 (local nsna) address. 1010 is a wait state code indicating a usable console could not be found. IPL VM with that address in LOADPARM. For example if your IPL volume is on address 0100 and your 3270 is at address 0200: IPL 0100 LOADPARM 0200 I never tried to put into LOADPARM sysg as console address, but this works if you get SAIPL with cons=sysg to get VM operator console into HMC Software Messages tab. Martin, Terry R. (CMS/CTR) (CTR) escreveu: Hi Bob, I can not even get into the SAL screen. How do you get into the SAL screen if you do not have a console? Thanks for the help! //Thank You,// //Terry Martin //Lockheed Martin - Information Technology //z/OS z/VM Systems - Performance and Tuning //Cell - 443 632-4191 //Work - 410 786-0386 /[EMAIL PROTECTED]/// *From:* The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] *On Behalf Of *Hodge, Robert L *Sent:* Friday, September 12, 2008 5:05 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: WAIT STATE Terry, From the SAL screen, there is a PF key to list the files on the CP parm disk. It may help you in determining what went wrong. If you made a backup of the SYSTEM CONFIG on the parm disk, then you can use the FN= and FT= options in the IPL parameters area to point to another SYSTEM CONFIG. If you have another CP parm disk (i.e. 2 or 3) that would work, then there is field in the upper left of the SAL screen where you can point to another CP parm disk. Press enter on the SAL screen to unprotect the CP parm disk field, and press enter after entering a new value. *From:* The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] *On Behalf Of *Martin, Terry R. (CMS/CTR) (CTR) *Sent:* Friday, September 12, 2008 2:49 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: WAIT STATE This not the first time I have had this VM up. I changed the system config adding page packs and such and might have had a finger check! //Thank You,// //Terry Martin //Lockheed Martin - Information Technology //z/OS z/VM Systems - Performance and Tuning //Cell - 443 632-4191 //Work - 410 786-0386 /[EMAIL PROTECTED]/ *From:* Martin, Terry R. (CMS/CTR) (CTR) *Sent:* Friday, September 12, 2008 4:44 PM *To:* 'The IBM z/VM Operating System' *Subject:* RE: WAIT STATE Hi Yes, I found this explanation. I think I might have messed up my system config file which is what is causing this. Can I go into SAPL mode and enter the cons to get me back in the system if the system config is in fact corrupted? //Thank You,// //Terry Martin //Lockheed Martin - Information Technology //z/OS z/VM Systems - Performance and Tuning //Cell - 443 632-4191 //Work - 410 786-0386 /[EMAIL PROTECTED]/ *From:* The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] *On Behalf Of *Doug Breneman *Sent:* Friday, September 12, 2008 4:36 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: WAIT STATE HCP1010W NO CONSOLE AVAILABLE. Explanation: The indicated disabled wait state PSW is loaded when an operational primary or alternate operator's console cannot be found. If you were running in virtual mode, CONMODE was not set to 3270. System Action: The system enters a disabled wait state (wait state code = 1010). If using the Stand-Alone Program Loader (SAPL), all registers contain the values held at the time the wait state was entered. Register 2 contains the console device address. Operator Response: There is probably a hardware malfunction. Notify your system support personnel. Verify that the RIOGEN macro instruction properly defined the primary and alternate system consoles. If you were running in virtual mode, enter the TERMinal CONMODE 3270 command, and re-IPL. If using SAPL, either specify the correct console address on the LOADPARM parameter of the IPL command or specify the correct console address using the 'CONS=' IPL parameter on the SAPL menu screen. Refer to Overriding Stand-Alone Program Loader Defaults in z/VM: CP Planning and Administration. If the problem persists, contact your IBM Support Center personnel to diagnose and correct the hardware error. Doug Breneman z/VM Development IBM Endicott Inactive hide details for Martin, Terry R. (CMS---09/12/2008 04:27:55 PM---HiMartin, Terry R. (CMS---09/12/2008 04:27:55 PM---Hi From: Martin, Terry R. (CMS/CTR) (CTR) [EMAIL PROTECTED] To: IBMVM@LISTSERV.UARK.EDU Date: 09/12/2008 04:27 PM Subject: WAIT STATE
Re: Alternatives to 3490E
Ed, Try http://www.luminex.com/products/ Channel Gateway Family is a great solution. We are runing it for more than one year and was totally transparent to migrate from real 3490E to this box. Even under z/OS as well under VSE. Edward M. Martin escreveu: Hello Everyone, I have been listening to the various cartridge situations. VTAPE, D/R, and the like. We are on 3490E right now with 4 VSE/ESA, 1 zVSE, and 1 zVM systems. We use EPIC on the VSE side and manually manage the tapes on the zVM side(D/R tape usage only). On the VSE side there are the following in the EPIC system. TOTAL ACTIVE TAPES7001 TOTAL SCRATCH TAPES 901 TOTAL NUMBER OF TAPES 7902 TOTAL NUMBER OF DATA SET ENTRIES 1066 We do some vary minor outside tape processing. What are the tape alternatives? Please correct me on what I am starting to look at. IBM 3590 costs and cartridge replacements (retired system?) VSSI VTAPE disk costs and lack of easy D/R. IBM VTL system Virtualized Tape systems EMC DISK LIBRARY Replacement for Carts D/R questions. Other possible solutions. Ed Martin Aultman Health Foundation 330-588-4723 ext 40441
Replace old BSC 3 connections
This question was cross posted into OS/390, VSE and zVM discussion lists Hello Today we have an IBM MP3000 with 04 WAC cards, 03 of them running BSC3 and on running a back-to-back vtam connection. We have a bid to replace this machine by a new z9 and get some software advantages. Today we have no problems with CPU or memory bottlenecks. Ou problem is limited to substitute access from WAC cards, so we can keep BSC3 lines sending data to application program. Simple solution could be an IBM 3745 model 170 (smalest) to keep same cenario and migrate from adapter cards to a channel independent machine, even connect thru Escon converter. IBM says no more NCP software licenses are available. What we can use as a substitute for WAC cards now how to connect this solution to z9? Thanks in advance for any comment or hint Carlos Bodra
Re: OS/390 2.7 and z900
Prado, I have a table compiled from various IBM sites and announcements, but it is in my desktop hd, just monday I can tell you. Give me a call monday morning. Regards Carlos Bodra De:The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU Para:IBMVM@LISTSERV.UARK.EDU Cópia: Data:Fri, 19 Oct 2007 12:47:54 -0500 Assunto:OS/390 2.7 and z900 People, Does anybody know if OS/390 2.4 or 2.7 runs on a z900 (2064-2XX)? Thanks, Prado
RES: VSE/VSAM for VM
I hope this can help you!!! -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Suleiman Shahin Enviada em: terça-feira, 17 de julho de 2007 08:22 Para: IBMVM@LISTSERV.UARK.EDU Assunto: VSE/VSAM for VM Greetings, I am in need for the instructions to install VSE/VSAM for VM on a zVM 5.3. I found a copy on tape but cannot locate the installation instructions. Any tips or links will be appreciated. Thanks to all. Suleiman Shahin _ Don't get caught with egg on your face. Play Chicktionary! http://club.live.com/chicktionary.aspx?icid=chick_hotmailtextlink2
RES: CA and BB old versions
Normally try CA site and BMC site to check level compatibility. Carlos Bodra -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Antonio C Prado Enviada em: terça-feira, 17 de julho de 2007 10:15 Para: IBMVM@LISTSERV.UARK.EDU Assunto: CA and BB old versions Hello friends! We are moving from a 9672 with OS/390 2.7 to a z9 with OS/390 2.10 under zVM 5.3. We have the following products from CA and BB (BMC): JOBTRAC CA3.5 CA90 CA1.0 CA-11 CA2.2 VIEW CA2.0 TLMS CA5.5 DELIVER CA1.7 SPOOL CA2.0 OPSMVS II CA4.4 GSS CA2.7.2 EASYTRIEVE PLUS CA6.3 BOOLE/CICSBB 5.5.01 BOOLE/DB2 BB 7.1.0 BOOLE/DASDBB 2.4.1 Does anybody know where can I find compliance information of these products to the new environment? Thanks Antonio
RES: RES: VSE/VSAM for VM
Sending again... -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Suleiman Shahin Enviada em: terça-feira, 17 de julho de 2007 09:25 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Re: RES: VSE/VSAM for VM Helllo Carlos, Where is it?! Nothing was attached :) Thanks. Suleiman Shahin From: Carlos Bodra [EMAIL PROTECTED] Reply-To: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To: IBMVM@LISTSERV.UARK.EDU Subject: RES: VSE/VSAM for VM Date: Tue, 17 Jul 2007 09:05:25 -0300 I hope this can help you!!! -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Suleiman Shahin Enviada em: terça-feira, 17 de julho de 2007 08:22 Para: IBMVM@LISTSERV.UARK.EDU Assunto: VSE/VSAM for VM Greetings, I am in need for the instructions to install VSE/VSAM for VM on a zVM 5.3. I found a copy on tape but cannot locate the installation instructions. Any tips or links will be appreciated. Thanks to all. Suleiman Shahin _ Don't get caught with egg on your face. Play Chicktionary! http://club.live.com/chicktionary.aspx?icid=chick_hotmailtextlink2 _ http://imagine-windowslive.com/hotmail/?locale=en-usocid=TXT_TAGHM_migratio n_HM_mini_2G_0507
RES: 3174 Don't work with TCP/IP Under VMESA
Alan, 3174 can participate in a TCP/IP network if has Ethernet adapter or into a Token Ring if configured with TKR adapter. There are some specific configuration questions to make this possible. Carlos -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Alan Altmark Enviada em: quarta-feira, 11 de julho de 2007 18:26 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Re: 3174 Don't work with TCP/IP Under VMESA On Wednesday, 07/11/2007 at 04:45 EDT, Sergio Lima [EMAIL PROTECTED] wrote: We have a problem here, may be why we don't know very well the 3174 machine. We are running TCP/IP under VM/ESA, but the 3174 machine don't want work. Unfortunatelly We don't have here in our hands, the TCPMAINT Log, but tomorrow, may be. For now, We have our IOCP configuration, and our TCPIP Profile, and We want know, if is possible someone help us. We will use TCP/IP, only for Telnet services, no FTP, no SMTP, etc... Here, the IOCP Configuration : TCP/IP can't use a 3174. 3174 is a terminal control unit. You need a 3172. Alan Altmark z/VM Development IBM Endicott
RES: RES: 3174 Don't work with TCP/IP Under VMESA
So David, there are 4 of them in world. I have 3 of them here, one gateway and 2 DSPU units. -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de David Boyes Enviada em: quarta-feira, 11 de julho de 2007 19:16 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Re: RES: 3174 Don't work with TCP/IP Under VMESA That 3174 IP gateway feature only operates when the 3174 is a) running SNA microcode and is b) attached to VTAM. It is not supported for use with the VM TCP stack.and does not work. It's nie to know that you have the other one of those beasts. I thought I had the only one left in the world... -Original Message- From: Carlos Bodra [EMAIL PROTECTED] To: IBMVM@LISTSERV.UARK.EDU IBMVM@LISTSERV.UARK.EDU Sent: 7/11/07 5:37 PM Subject: RES: 3174 Don't work with TCP/IP Under VMESA Alan, 3174 can participate in a TCP/IP network if has Ethernet adapter or into a Token Ring if configured with TKR adapter. There are some specific configuration questions to make this possible. Carlos -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Alan Altmark Enviada em: quarta-feira, 11 de julho de 2007 18:26 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Re: 3174 Don't work with TCP/IP Under VMESA On Wednesday, 07/11/2007 at 04:45 EDT, Sergio Lima [EMAIL PROTECTED] wrote: We have a problem here, may be why we don't know very well the 3174 machine. We are running TCP/IP under VM/ESA, but the 3174 machine don't want work. Unfortunatelly We don't have here in our hands, the TCPMAINT Log, but tomorrow, may be. For now, We have our IOCP configuration, and our TCPIP Profile, and We want know, if is possible someone help us. We will use TCP/IP, only for Telnet services, no FTP, no SMTP, etc... Here, the IOCP Configuration : TCP/IP can't use a 3174. 3174 is a terminal control unit. You need a 3172. Alan Altmark z/VM Development IBM Endicott
TCP/IP Message
Hello. We are running z/VM 4.4 and since initial installation no problem arises. This week, we started to receive following messages: DTCUTI002E TCP/IP is low on TCBs. Of 256 blocks, 24 are free. You should monitor this. DTCUTI002E TCP/IP was very low on TCP connections. Of 341 blocks, 85 are free after 85 more allocated. DTCUTI002E TCP/IP was very low on TCP connections. Of 285 blocks, 41 are free after 85 more allocated. These messages occur with differences of some days. In TCPIP PROFILE file we have only SMALLDATABUFFERPOOLSIZE 150 included. All others buffers are default values. What other buffer(s) I should modify (define) to solve this problem. Our network has about 300 to 350 at peak moment. Thanks for now! Carlos
RES: Real Life is meeting Second Life at WAVV !!!
an idea could be for all participants tell here in VSE-L your avatar name, so we can identify each one I will do as soon as I join Second Life. -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de David Boyes Enviada em: sexta-feira, 18 de maio de 2007 12:47 Para: IBMVM@LISTSERV.UARK.EDU Assunto: FW: Real Life is meeting Second Life at WAVV !!! Here's a neat twist for a conference. Dunno how well it will work, but it's innovative and a cool hack. Subject: Real Life is meeting Second Life at WAVV !!! Real Life is meeting Second Life at WAVV !!! We're going to try having a little fun. Want to hear more? Are you a regular WAVV attendee who can't make it to Green Bay this year? Will you be attending WAVV, but think someone on your team back home (perhaps your manager) would like to see what WAVV has to offer? Are you someone who has never attended WAVV, but are curious what you've been missing? (WAVV = World Alliance of VSE, VM, Linux) You may, or may not, be familiar with 'Second Life'. Within Second Life, you become immersed in a 3-D virtual world. For example, IBM has constructed a complete virtual version of the Briefing Center at the Boeblingen Lab. Using Second Life technology, we're planning to do a simultaneous broadcast of the 'IBM Update' session at WAVV. The update session generally covers a brief overview of z/VSE, z/VM, System z hardware, and Linux on System z. It begins on Saturday, May 19, at 9:00 AM Central daylight time (7:00 AM PDT, 8:00 AM MDT, 10:00 AM EDT, and 4:00 PM (16:00) Central European time). The session will last approximately one hour. . You can find instructions how to get yourself established in Second Life and where to attend the meeting on the z/VSE web site. http://www-03.ibm.com/servers/eserver/zseries/zvse/ Follow the instructions (there is a PDF to download) and join those of us at WAVV - live (almost., there's a 2 minute delay). . To tell the truth, we've never done this before. As a result, there are no guarantees. If it doesn't work, we apologize. Assuming it does work, you'll be able to learn more about z/VSE, z/VM, System z hardware, and Linux on System z. You may also begin to appreciate just a fraction of what's available at WAVV. Its worth a try.
RES: NSS missing
Mary, CLEAN means clean, it deletes all files from spool and other special files as NSS and other. You should use CLEAR, that only deletes spool files but Keep intact NSS files. For a rapid recovery, since you copy Devl disks, you can use SPXTAPE and backup only NSS segments from DEVL system and then restore it in you TEST system. It's easy and fast, than restore all DEVL system again. I hope this help you. ___ Carlos Bodra zSeries System Programmer São Paulo - SP - Brazil -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Mary Elwood Digest Enviada em: terça-feira, 13 de fevereiro de 2007 13:43 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Fw: NSS missing Good Morning All A VM newbie here and I've done something that I don't know how to fix. I built a z/VM 5.2 Test system off of our z/VM 5.2 Devl system by copying the 520RSD 520SPD and 520PGD to 520RST 520SPT and 520SPT. The first time I IPL'd the 5.2 test system, I chose to do a 'clean noautolog'.The system IPL's, but I have no Named Saved Segments. We thought these NSS's were on the spool volume, so we restored the devl spool volume over to the test and re'ipld. We have the same problem. When we try to logon to 'maint', it is missing the cmspipes and cmsvmlib. Is there a way I can rebuild all the NSS without knowing what they are??? Now that I ask the question - I'm thinking 'no', because I can't logon to CMS. Any and all help greatly appreciated. p.s. - it just might be easier to start from scratch. Thanks for your help and patience, Mary Elwood
RES: Changing DOSRES SYSWK1 labels using ICKDSF under z/VM ?
Remember that a lot of assgns are done in STDLABEL, STDLABUP and so on that mades references to DOSRES and SYSWK1. Mainly are POWER and ICCF. ___ Carlos Bodra zSeries System Programmer São Paulo - SP - Brazil -Mensagem original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Em nome de Rich Smrcina Enviada em: quinta-feira, 21 de dezembro de 2006 00:08 Para: IBMVM@LISTSERV.UARK.EDU Assunto: Re: Changing DOSRES SYSWK1 labels using ICKDSF under z/VM ? Sure you can, but you may not like the results. Why do you want to change them? Daniel Allen wrote: Can you change DOSRES SYSWK1 labels using ICKDSF under z/VM ? -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
[no subject]
Hi! We are installing DB2 V7.4 and have a -934 error during start up of server machine unde a z/VM 4.4 Level 0501. What sounds strange is that if we start server without saved segment support, no problems occurs. Our old data base is a SQL version 3.4, so saved segments grows a lot and we don´t know if this problem is because wrong definition of saved segments (using vmfsgmap exec) Since SQL is running in production and these saved segments have original IBM names, we did need to rename new ones. Bellow is where we put them: DB2RMGR 01400-02300 DB2ISQL 00B00-00B60 DB2SQLDS 008B0-00A2F DB2XRDS 01400-0237F DB2SP03 008B0-0237F -- This is DB Space Server machine has 128MB memory defined in directory. Since we guess that DB2 program directory is not complete about how to generated saved segments, we are trying to get some help and hints from VM-L gurus. Thanks a lot for help. Carlos São Paulo - Brazil
