Re: [newbie-it] Consiglio
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 05 November 2003 20:08, you wrote: [...] Monto le aree sullo slave e poi con uno script lanciato da cron le copio in locale con lo stesso percorso della macchina master in modo da avere una situazione completamente uguale nel caso di rottura del master.La domanda è la seguente, esiste un modo migliore per ottenere lostesso risultoto? Via ftp è meglio o rsync? Datemi un consiglio.Grazie ciao Beh, quello che vuoi fare tu e` il RAID Mirroring (che non ricordo mai se e` lo 0 o l'1), che scrive in contemporanea sui due dischi. Forse ti conviene montare l'altro hard disk sulla tua macchina e vedere se riesci ad impostare la gestione RAID via software (il kernel lo supporta e molte distribuzioni attivano al boot questo supporto anche se non presente) Buon RAID Luigi - -- Gli elementi più comuni nell'universo sono l'idrogeno e la stupidità. Anonimo Tschüß! Chiave pubblica gpg(0xF90C2294) disponibile sul keyserver -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/qhOhrUONsfkMIpQRAsqwAJ9bkwtDhcoFA4OmpRKle1N+ehCiOgCffzlx Y0csPcBw+QPaatV/BYR4/w8= =t7yQ -END PGP SIGNATURE-
Re: [newbie-it] Creare un server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 05 November 2003 18:41, Santarella Benedetto wrote: Alle 22:07, lunedì 3 novembre 2003, miKe ha scritto: ti servono un dominio registrato (quindi un dns che risolva il tuo nome) e una macchina sulla quale far girare apache , una macchina non dico blindata ma quantomeno configurata in modo decente per resistere ai probabili problemi che si possono trovare su internet; infine una _bella_ linea, direi un bell'hosting e risolvi.. Ok, messaggio ricevuto, ma giusto per curiosita' (e perche' sono una testa dura), dove posso trovare un po' di documentazione? Su www.register.it trovi parecchie info su come fare usando tutto esterno (dominio, hosting, dns ecc.) Non mi ricordo bene, ma se vuoi usare pagine dinamiche guarda quale servizio acquistare (alcuni danno hosting su server che supportano asp, altri php ecc.). Non saprei se e' un register mifgliore di altri, e' solo l'unico con cui abbia mai registrato dei dominii:-) Se hai gia' una connessione veloce puoi provare anche il tutto senza spendere nulla tramite www.dyndns.org. Avrai un nome di dominio (gratis non a tua scelta, qualcosa come freefred.dyndns.org insomma) e se non hai un ip statico dovrai usare anche uno degli script che ti fanno l'update del dns. questo perche' se conosci Apache immagino tu abbia gia' delle conoscenze, altrimenti c'e' quasi tutto su Appunti Linux. bye - -- Devil Inside Experiment - C'era un bambino che odiava la polizia http://www.acidlife.com/mayhem/freefred/ Davide Banda Partial Arts [2000] - http://www.marcob.org/go.asp?~freefred/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/qporJoljSvtxdFkRAjYTAJ9jNI17VuI9C/fyMPbUuCt8JNTK/ACdGSK+ ZlI/9cMoOu4tu74ok6Ct4hg= =Y62V -END PGP SIGNATURE-
Re: [newbie-it] nmap (BO????)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alle 20:26, mercoledì 5 novembre 2003, Santarella Benedetto ha scritto a [EMAIL PROTECTED] in merito a Re: [newbie-it] nmap (BO) : Alle 22:04, lunedì 3 novembre 2003, miKe ha scritto: il loopback... 127.0.0.1/255.0.0.0 Ovvero? ovvero ti risponde per ogni 127.x.x.x .. o vuoi sapere cosa sia il loopback? altrimenti ti rimando a www.dizionarioinformatico.com ;P - -- bye miKe ^ Slackware 8.1 GNU/Linux 2.4.22--jl12 @ ASUS S1N 1330c R.U.219755 - S.R.U.705 - R.M.110932 - MajaGLUG Member -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/qu3lF/9fksDJ4y0RArp6AKCoWP2IcK1flIMjbnmndkvButEjLwCgn9cF OeLpWWpdmlYIVx51a+Z3ark= =Nx+r -END PGP SIGNATURE- -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Scopri come investire i tuoi risparmi con Manuali.Net! Tutti i trucchi ed i segreti in un comodo corso: Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=1809d=7-11
Re: [newbie] TO STOP AUTOMATIC STARTX FOR A WHILE - TO STOP X-SERVER FOR A WHILE
On Thu, 2003-11-06 at 02:50, [EMAIL PROTECTED] wrote: Hello everybody , I configured my Mandrake 9.2 to startx and log-in automatically to KDE But in order to load nvidia graphic driver , I should go text mode ( terminal mode ) and stop X server . But if I make ctrl + shift + bckspc then X starts again automatically to KDE since it is so configured. How can I stop X server for a while , do the job and run startx again !! ?? Thanks in advance !! Hertas Switch to runlevel 3 and then back to runlevel 5. telinit 3 (do your driver thing) telinit 5 Saludos, Adolfo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT Qcad
Lee Wiggers wrote: In my neverending quest to rid myself of win2k I am embracing Qcad ilo autocad. I can't figure out how to adjust the thickness of a line. All else is an improvement from the cumbersome autocad commands. Lee Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com On the attributes toolbar there is a width option as well as style and color. Right click on the top of the window below the title bar and you can turn the attributes toolbar on there if you don't have it now. Dax Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Autostart programs in KDE
Hello Mandrake group, I remember in one of the previous releases of Mandrake I could configure certain programs to be started automatically when KDE is started. Where can I find this feature in 9.1 or 9.2? -- -=Robert Beata Golovniov | Lviv, Ukraine=- ~~ mailto:[EMAIL PROTECTED]Body=Embedded%20key ~~ Raise your eyes high up and see. Who has created these things? (Isaiah 40:26) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Modem Dialer for Mandrake 9.2
On Wednesday 05 November 2003 10:39 pm, Aidan Holmes wrote: I loved KPPP in 9.0, so easy to use and very reliable. in 9.2 I cannot find KPPP but GnomePPP is there instead. GnomePPP crashes about 10 seconds after connecting every time. DrakConnect works fine, but is painful to get to since the only way I can find it is to go through the Mandrake Control centre. When I tried to install KPPP through the add software function (in Control Centre) half of my applications dissappear from the KDE menu (Office, game, WWW apps) including Mozilla among others!!! and KPPP is nowhere to be found. Has anybody else had success dialling up with 9.2? What did you do and how did you do it? Now, the package for Kppp is kdenetwork-kppp. It sounds like you found it. I don't dial out, so I can't say what is going on. Now I just messed with it on my modem less system, and it worked fine. I would suggest opening it from a termial window, and seeing what messages stream by. They might give a clue to your problems. Rob -- Linux: For the people, by the people. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Autostart programs in KDE
On Wednesday 05 November 2003 11:29 pm, Robert Golovniov wrote: Hello Mandrake group, I remember in one of the previous releases of Mandrake I could configure certain programs to be started automatically when KDE is started. Where can I find this feature in 9.1 or 9.2? You can just drop a link to the program in ~/.kde/Autostart Rob -- Linux: For the people, by the people. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mandrake 9.2 ISO
I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! -- Linux user: #333581 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Pawel, if you have been reading anywhere about Mandrake 9.2 you will know of the problems that have been found with LG drives. The ISOs will be made public as soon as new ones are ready that fix that problem. Anne -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re[2]: [newbie] Autostart programs in KDE
On Thursday, November 6, 2003, 9:37:52 AM, Rob Blomquist wrote: RB You can just drop a link to the program in ~/.kde/Autostart Thank you, Rob. Very simple solution and works fine. -- -=Robert Beata Golovniov | Lviv, Ukraine=- ~~ mailto:[EMAIL PROTECTED]Body=Embedded%20key ~~ Raise your eyes high up and see. Who has created these things? (Isaiah 40:26) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Modem Dialer for Mandrake 9.2
Aidan Holmes wrote: Does anybody else out there have 9.2 and an old fashioned dial-up connection??? I live in a rural area of Australia and I think it will be years before we get broadband, so dial-up is all we have. I'm in beautiful downtown Worrigee, OZ. When I ask those wonderful people at Telstra Country thin or whatever it calls itself about broadband all I get is blank, glazed over stares. BTW, I am just 2km from a RIM box and 6km from a major regional exchange. I digress Had the same issue as you with 9.2 - the response from paid for MDK support was the simalar to above. In fact there was no response. Sorry, digressing again Anyway, have a Maestro modem. When I upgraded from 9.1 to 9.2, no modem dialler (MDK 9.2 upgrade removed KPPP that I'd been using). Ran the DrakConnect (you can get to it from the MDK Control Centre Network option), Clicked Wizard and chose to configure dial up modem connection only. After configuration, restarted Linux. On login found KPPP (Internet Dial Up Tool) on Networking Remote Access menu. It all seems very messy getting there, but it worked. regards -- Pierre Final Filer Software http://www.finalfiler.com Worrigee, NSW, Australia 2540 -- Life's like a roll of toilet paper- The closer it gets to the end, the faster it goes. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
Anne Wilson wrote: On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Pawel, if you have been reading anywhere about Mandrake 9.2 you will know of the problems that have been found with LG drives. The ISOs will be made public as soon as new ones are ready that fix that problem. any idea of a rough ETA for that? (I've been planning my new Mandrake install for 1moth + now ;) ... didn't install the rc12 just because I though it would come out any minute now :P ) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT Qcad
snip Right now I need to figure out how to get a line more than 1 pixel wide. Makes for hard reading. Lee http://www.ribbonsoft.com/qcad/manual_reference/layers.html Figure 16, 2/3 of the way down the page. HTH -- Michael Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Fw: Soundcard at ASUS P4S533-X
On Thursday 06 Nov 2003 3:15 am, Anisio Neto wrote: hello... here is my modules.conf probeall scsi_hostadapter ide-scsi probeall usb-interface usb-ohci alias eth0 sis900 above snd-intel8x0 snd-pcm-oss alias sound-slot-0 i810_audio i tried to install the alsa mixer but i cannot because some signature doesn´t match! i really don´t have a clue thanks a lot Anisio - Original Message - From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 05, 2003 11:09 AM Subject: Re: [newbie] Fw: Soundcard at ASUS P4S533-X On Wednesday 05 Nov 2003 11:22 am, Anisio Rodrigues Neto wrote: hello, i´m new at the list and inlinux as well... i installed the mandrake 9.1 on my pc, the motherboard is an ASUS P4S533-X, the mandrake recognize my sound card but it doensn´t work at all. i tried other alsa drivers but i don´t know how to use them. Does anyboy had the same problem and can help me? i´m not a linux user but i´m trying to be, i tried already the red hat 9 and connectiva 9 (a brazilian distribuition), and the mandrake was the only one that recongnized my soundcard... i tried the volume as well... the´re up, but no sound at all... thanks folks. Anisio Could you post your /etc/modules.conf please? Also which mixer did you use? You should try aumix and alsamixergui as well (install the RPM) derek On Thursday 06 Nov 2003 3:15 am, Anisio Neto wrote: hello... here is my modules.conf probeall scsi_hostadapter ide-scsi probeall usb-interface usb-ohci alias eth0 sis900 above snd-intel8x0 snd-pcm-oss alias sound-slot-0 i810_audio i tried to install the alsa mixer but i cannot because some signature doesn´t match! i really don´t have a clue thanks a lot Anisio OK so you are using the alsa driver. Go ahead and install the alsamixergui. That message you saw was just a warning that the package had not been signed with the signature of the packager. Some of the packages in contrib are like that. It is OK to go ahead and tell it to install anyway. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Do a google search for 9.2 iso's... Thats how I found it.. I found an australian mirror with the real ISO's (not rc2) and a local mirror of all the updates... loading it on my new webserver now. rgds Franki -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Autostart programs in KDE
You can, Just copy on the /home/user/.kde/Autostart/ directory files mades executables (chmod +x file name) with scripts; for example, I start xscreensaver with a file included in the mentioned directory, named: start-xscreensaver.sh with the next script: xscreensaver -nosplash Regards Francisco Alcaraz - Mensaje Original - Remitente: Robert Golovniov [EMAIL PROTECTED] Fecha: Jueves, Noviembre 6, 2003 8:29 am Asunto: [newbie] Autostart programs in KDE Hello Mandrake group, I remember in one of the previous releases of Mandrake I could configure certain programs to be started automatically when KDE is started. Where can I find this feature in 9.1 or 9.2? -- -=Robert Beata Golovniov | Lviv, Ukraine=- ~~ mailto:[EMAIL PROTECTED]Body=Embedded%20key ~~ Raise your eyes high up and see. Who has created these things? (Isaiah 40:26) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] nVidia problem with permissions ..
On Wednesday 05 Nov 2003 4:37 pm, Ricky wrote: Hello all, ( thx..learned alot listening in) but I need some guidance here.. Fyi I'm a 9 week old noob' but windoze user, back from dos 5/6+. I'm dual booting [mandrake 9.1, kernel 2.4.19-13, kde 3.1.4] w/win98 fer games now .. I have a creative labs Geforce Pro videocard. the glx driver rpm's from mandrake are installed but I couldnt get 'glxgears' test to work (after I broke my system for the 12+ time), this time i got this error trying to run quake2 thru winex3.1 from konsole error: could not open /dev/nvidiactl because the permissions are too restrictive. Please see the FREQUENTLY ASKED QUESTIONS section of /usr/share/doc/NVIDIA_GLX-1.0/README for steps to correct. So readme says the PAM system may be changing permissions on nvidia /dev files. So this usually works but it can get confused. It recommends changing /etc/security/console.perms and remove dri references. I did this and it works, glxgears and quake2. BUT I miss line 80 with another dri reference and forget to chmod fileperms owner to root.yes I got xcited. So now it wont finish booting, It says hde1 is not right and wants to do fschk but fails, choice is to reboot or ctrl-d for root password. So I go to root console and try to repair the lines in console.perms thru emacs, now the file system is read-only, although emacs will make a backup (console.perms~) ?? So before I reinstall from iso backups (norton ghost) pheew .. how should I procede ? should the mandrake rpm's be fine if I install nvidia driver from nvidia*.pkg2.run from the site ? or do they need to be uninstalled ? inorder to not repeat this again, any ideas? I'd like to fix it first, ghost it as the last resort, then install nvidia driver. Thx in advance, btw I ghosted /home before I wrote to newbie.. so I think the FS should be ok. I think .. (sidebar?-what is pam?) Yuck... You have managed to get in a bit of a mess. The issue with console.perm is trivial and easily resolved. Your real problem is the file system on /dev/hda has managed to get corrupted somehow. Which file system are you using? It should be a Journalling system such as Ext3, ReiserFS or XFS. Do not use Ext2 it is far too vulnerable to getting corrupted when newbies choose the 'Windows way out' and hit the 'Reset' button. BTW: If you want to know how to power down your system safely then look here http://doc.mandrakelinux.com/MandrakeLinux/91/en/Starter.html/troubleshooting-system-freeze.html I would suggest the easiest way out of your problem is to reformat your partitions and either restore your Ghost image, or just do a fresh install while preserving your /home partition so your settings are not lost. As for the Nvidia driver all you have to do is edit this line in console.perms dri=/dev/nvidia* /dev/3dfx* and line 80 should look like xconsole 0600 dri0666 root You should also check your /etc/modules.conf includes the line alias /dev/nvidia* nvidia Oh and PAM is Permissions Access Module. It works out who is allowed to do what. In this case it is working out who is allowed to send data directly to the screen (Direct Rendering) The 0666 in that line above means any user logged into an XConsole can use the Direct Rendering HTH derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
On Thursday 06 Nov 2003 9:20 am, Anarky wrote: Anne Wilson wrote: On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote: Pawel, if you have been reading anywhere about Mandrake 9.2 you will know of the problems that have been found with LG drives. The ISOs will be made public as soon as new ones are ready that fix that problem. any idea of a rough ETA for that? (I've been planning my new Mandrake install for 1moth + now ;) ... didn't install the rc12 just because I though it would come out any minute now :P ) 'Any day now' g Don't forget that if you follow Franki's route you are installing the version with the LG problem. OTOH, I'm going to install that one anyway, since I don't have an LG drive. Anne -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] You know your ebay item...
You know you are dealing with farmers on Ebay when your items come wrapped in plastic fertiliser bags... -- John Willby Registered Linux user number 321644 ICQ: 92791912 Jabber: [EMAIL PROTECTED] YIM: vicarofwibley Linux is like a wigwam - No Gates, no Windows, Apache inside. 10:57:31 up 2 days, 2:55, 1 user, load average: 0.00, 0.00, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] re: You know your ebay item...
Sorry chaps that went to the wrong list... -- John Willby Registered Linux user number 321644 ICQ: 92791912 Jabber: [EMAIL PROTECTED] YIM: vicarofwibley Linux is like a wigwam - No Gates, no Windows, Apache inside. 10:57:31 up 2 days, 2:55, 1 user, load average: 0.00, 0.00, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SHould I get SuSe
On Wed, 5 Nov 2003 21:42:11 -0800 E. Hines [EMAIL PROTECTED] uttered: But Mac, I do have a life and don't want to spend all day (or 2 days) configuring my Deb install. One word: webmin -- HaywireMac ++ ICQ # 279518458 Registered Linux user #282046 Homepage: www.orderinchaos.org ++ Mandrake HowTo's More: http://twiki.mdklinuxfaq.org ++ You can always pick up your needle and move to another groove. -- Tim Leary Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT Qcad
On Thu, 06 Nov 2003 22:47:04 +1300 Michael Adams [EMAIL PROTECTED] wrote: snip Right now I need to figure out how to get a line more than 1 pixel wide. Makes for hard reading. Lee http://www.ribbonsoft.com/qcad/manual_reference/layers.html Figure 16, 2/3 of the way down the page. HTH -- Michael Thanks all. Actually found it by accident just before reading your replies. I did a shop drawing in 1/2 the time it takes in autocad, first try, with a standard template. Should have done this months ago. Lee -- User #223705 Linux Counter, http://counter.li.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] duel booting help
What is the best way to set up a duel boot between two different Linux distros? I have Mandrake on hda and suse on hdc. tia walt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] nVidia problem with permissions ..
I would suggest the easiest way out of your problem is to reformat your partitions and either restore your Ghost image, or just do a fresh install while preserving your /home partition so your settings are not lost. As for the Nvidia driver all you have to do is edit this line in console.perms dri=/dev/nvidia* /dev/3dfx* and line 80 should look like xconsole 0600 dri 0666 root You should also check your /etc/modules.conf includes the line alias /dev/nvidia* nvidia Oh and PAM is Permissions Access Module. It works out who is allowed to do what. In this case it is working out who is allowed to send data directly to the screen (Direct Rendering) The 0666 in that line above means any user logged into an XConsole can use the Direct Rendering HTH derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Thx Derek, I'll give it a try. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] duel booting help
I think it was either Linux Format or Linux Magazine that had an article on this a couple of months ago. Check out their websites and see if the article on how to set up a multi-boot system is posted. LeRoy What is the best wa y to set up a duel boot between two different Linux distros? I have Mandrake on hda and suse on hdc. tia walt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT Qcad
On Thursday 06 Nov 2003 11:44 am, Lee Wiggers wrote: On Thu, 06 Nov 2003 22:47:04 +1300 Michael Adams [EMAIL PROTECTED] wrote: snip Right now I need to figure out how to get a line more than 1 pixel wide. Makes for hard reading. Lee http://www.ribbonsoft.com/qcad/manual_reference/layers.html Figure 16, 2/3 of the way down the page. HTH -- Michael Thanks all. Actually found it by accident just before reading your replies. I did a shop drawing in 1/2 the time it takes in autocad, first try, with a standard template. Should have done this months ago. This is sounding better and better. Anne -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] nVidia problem with permissions ..
-Original Message- From: Ricky [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 05, 2003 11:37 AM To: [EMAIL PROTECTED] Subject: [newbie] nVidia problem with permissions .. Hello all, ( thx..learned alot listening in) but I need some guidance here.. Fyi I'm a 9 week old noob' but windoze user, back from dos 5/6+. I'm dual booting [mandrake 9.1, kernel 2.4.19-13, kde 3.1.4] w/win98 fer games now .. I have a creative labs Geforce Pro videocard. the glx driver rpm's from mandrake are installed but I couldnt get 'glxgears' test to work (after I broke my system for the 12+ time), this time i got this error trying to run quake2 thru winex3.1 from konsole error: could not open /dev/nvidiactl because the permissions are too restrictive. Please see the FREQUENTLY ASKED QUESTIONS section of /usr/share/doc/NVIDIA_GLX-1.0/README for steps to correct. So readme says the PAM system may be changing permissions on nvidia /dev files. So this usually works but it can get confused. It recommends changing /etc/security/console.perms and remove dri references. I did this and it works, glxgears and quake2. BUT I miss line 80 with another dri reference and forget to chmod fileperms owner to root.yes I got xcited. So now it wont finish booting, It says hde1 is not right and wants to do fschk but fails, choice is to reboot or ctrl-d for root password. So I go to root console and try to repair the lines in console.perms thru emacs, now the file system is read-only, although emacs will make a backup (console.perms~) ?? So before I reinstall from iso backups (norton ghost) pheew .. how should I procede ? should the mandrake rpm's be fine if I install nvidia driver from nvidia*.pkg2.run from the site ? or do they need to be uninstalled ? inorder to not repeat this again, any ideas? I'd like to fix it first, ghost it as the last resort, then install nvidia driver. Thx in advance, btw I ghosted /home before I wrote to newbie.. so I think the FS should be ok. I think .. (sidebar?-what is pam?) ok. I think .. (sidebar?-what is pam?) Ricky, I had (have) a very similar problem with my GeForce FX 5600... I started getting that same error you do about permissions being to restrictive. I also attempted removing the dri references (but forgot one) and found my self booting to what you have now. Now if only I can remember how I fixed it... I do know I made a backup of the console.perms but I believe to overwrite the exsisting one, I had to go in single mode. If are using LILO, try booting into single mode THEN try modifying the console.perms file. I believe you hit ESC at the graphic LILO screen and type 'linux single' to accomplish this (others can comment if this isn't right). While I was able to bring it back just fine, I tried it again but made sure to remove all dri references... I wasn't impressed with the results so I put it back. To this day if I get that error I must enter a root console and chmod 0666 /dev/nvidia* to get to work. Please, if any knows of better solution, let us know!! Thanks, Tango __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Organizing bookmarks
I use and highly recommend backflip.com ...That site has come in much more handy then I thought... --- Trey Sizemore [EMAIL PROTECTED] wrote: I have accumulated bookmarks in each of 3 browsers (Mozilla, Firebird, and Galeon) over time and I'm ready to clean house. I'm looking to either import from one into another or find some way that they can all 3 share a common set of bookmarks. I tend to use Firebird the majority of the time, so I wouldn't mind just consolidating there. I'd appreciate any ideas from someone who's done this. -- Cheers, Trey --- There is an innocence in admiration; it is found in those to whom it has not yet occurred that they, too, might be admired some day. - Friedrich Nietzsche ATTACHMENT part 2 application/pgp-signature name=signature.asc __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] duel booting help
On Thursday 06 Nov 2003 11:48 am, racerpup2 wrote: What is the best way to set up a duel boot between two different Linux distros? I have Mandrake on hda and suse on hdc. tia walt Assuming you are using Lilo, and Mandrake installed lilo then what you do is while booted into Mandrake create a mount point (for example /mnt/suse_boot and mount your Suse /boot partition on it. Now edit your lilo.conf and add a stanza like this :- image=/mnt/suse_boot/vmlinuz label=Suse root=/dev/hdc1 initrd=/mnt/suse_boot/initrd.img append=blah blah vga=788 read-only Now when you run lilo -v Lilo will calculate the cylinder and sector that the Suse image is located at and will write those values into the bootloader. The only reason you have to mount the Suse /boot in Mandrake is to allow Lilo to calculate that sector offset. Hope that works for you. Its what I do to run Libranet (which by the way is the easiest way to get into Debian I know of) I think Grub may be better for doing this sort of thing, but I have never got around to learning it. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Modem Dialer for Mandrake 9.2
On Thursday 06 November 2003 01:39 am, Aidan Holmes wrote: Does anybody else out there have 9.2 and an old fashioned dial-up connection??? I live in a rural area of Australia and I think it will be years before we get broadband, so dial-up is all we have. I loved KPPP in 9.0, so easy to use and very reliable. in 9.2 I cannot find KPPP but GnomePPP is there instead. GnomePPP crashes about 10 kppp in 9.2 is called kdenetwork-kppp. it should be on your disks. -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] how many...
How many Microsoft engineers does it take to change a light bulb? None, they merely change the standard to darkness and then they upgrade the customers. -- John Willby Registered Linux user number 321644 ICQ: 92791912 Jabber: [EMAIL PROTECTED] YIM: vicarofwibley Linux is like a wigwam - No Gates, no Windows, Apache inside. 13:23:03 up 2 days, 5:20, 1 user, load average: 0.12, 0.25, 0.15 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] slow and failing uploads
I've got a couple of php/sql apps on a server running 9.1 that will take uploads. The problem is that the uploads take forever and sometimes die before they're finished. These are done through a web interface--no ftp or anything like that. Downloads work fine. I have a hunch that this is related to firewall, but what would I check on the server to make sure it's not some config setting there? It's running at the highest security level, but pretty much a stock install of everything web-related. Todd -- Name that tune #17: So you say there's a race of men in the trees; you're for tough legistlation. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SHould I get SuSe
At 08:22 AM 11/5/03, Anders Lind wrote: On Sun, 05 Oct 2003 10:13:17 -0700 Carl Creason [EMAIL PROTECTED] wrote: Sorry for the ignorance but what is portsystem. I googled, but the few pages I found were in German and seemed to be about FreeBSD. Yes, it is the packagesystem in FreeBSDit downloads, compiles and installs with only one command *BSD ports and packages are different systems. The package system works as you mention, the ports system does not. The package system does not support upgrades. You must uninstall the current release, then install the next release. The *BSD ports system is awful. It is one single large download including a very large number of software products. It will download a specific product source tarball(s), apply patches for *BSD, then install. The problems start when you install multiple products using ports system and you want to upgrade one and not others. Then you must maintain multiple copies of these big downloads. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] 9.2 DVD from ISO
I've succesfully downloaded the bittoerrent files, now I'd like to create a single DVD (rather than 3 CDs) from the 9.2 ISOs. Any suggestions as to how I convert the hdlist files, etc? Many thanks Paul M Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Hardware diagnostics (old Dell)
One of my boxes does the same thing if I don't get the memory seated just exactly right. If I pull the memory one stick at a time I can isolate which stick was incorrectly seated and fix the problem. -- Warren Post Santa Rosa de Copán, Honduras http://srcopan.vze.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Fw: Soundcard at ASUS P4S533-X
On Thursday 06 November 2003 04:15, Anisio Neto wrote: hello... here is my modules.conf probeall scsi_hostadapter ide-scsi probeall usb-interface usb-ohci alias eth0 sis900 above snd-intel8x0 snd-pcm-oss alias sound-slot-0 i810_audio i tried to install the alsa mixer but i cannot because some signature doesn´t match! i really don´t have a clue thanks a lot Anisio - Original Message - From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 05, 2003 11:09 AM Subject: Re: [newbie] Fw: Soundcard at ASUS P4S533-X On Wednesday 05 Nov 2003 11:22 am, Anisio Rodrigues Neto wrote: hello, i´m new at the list and inlinux as well... i installed the mandrake 9.1 on my pc, the motherboard is an ASUS P4S533-X, the mandrake recognize my sound card but it doensn´t work at all. i tried other alsa drivers but i don´t know how to use them. Does anyboy had the same problem and can help me? i´m not a linux user but i´m trying to be, i tried already the red hat 9 and connectiva 9 (a brazilian distribuition), and the mandrake was the only one that recongnized my soundcard... i tried the volume as well... the´re up, but no sound at all... thanks folks. Anisio Could you post your /etc/modules.conf please? Also which mixer did you use? You should try aumix and alsamixergui as well (install the RPM) derek This is strange, the sound related lines are: above snd-intel8x0 snd-pcm-oss alias sound-slot-0 i810_audio The first line is for ALSA to load the snd-pcm-oss module after the snd-intel8x0 module is loaded, but the second line will cause the i810_audio OSS driver to be loaded. Did you manually edit /etc/modules.conf ? For ALSA the lines should be: alias sound-slot-0 snd-intel8x0 above snd-intel8x0 snd-pcm-oss And be sure to unmute the relevant channels, just raising volumes is not enough. Good luck, -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Modem Dialer for Mandrake 9.2
WellI am finally on the net again with 9.2 Thanks to all those that offered help. For those that are interested, this is how I did it. After (another) clean install, I ran drakConnect to set up the connection and restarted before attempting to connect. after the restart, KPPP had not appeared there as it had for one other user, so I installed it from the 9.2 disks. Then I restarted again. This time KPPP had been installed correctly and it had not simultaneously removed most of my other apps like it did last time. Now I attempted to connect using KPPP failed again, the PPP daemon died unexpectedly. When I viewed the error log it told me that the ISP had spat out the username/password I knew I had them entered correctly sa I tried changing a setting (the protocol?) in KPPP from PAP to PAP/CHAP and now all is working fine. - this might be worth noting for others trying to use ancient dial up accounts. I don't know if all the restarts were necessary, but I'm still in the windows mentality of if in doubt - restart when you make any changes to program installations. As for KPPP installing this time but not others, it seems that the order I did things in made the difference this time. Last time I had not configured my connection in drakConnect before attempting to install it and it really screwed my computer up. I wouldn't have thought this should have made any difference though. Any thoughts??? perhaps this would be a handy addition to the Twiki - but I'm still not certain WHY this worked this time so I don't want to go adding notes that are full of bulls#%t -Aidan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] web radio broadcasts
i like to listen to radio web broadcasts at work but some of the stations i prefer only use windows media player format. i've talked to them in the past about adding realplayer accessability and was told it's a matter of cost. i can use media player in my vmware session but the volume controls seem to have a lower cutoff than rp in linux. is there a current product usable in mdk 9.1 that will play the format used by media player for the web broadcasts? strictly sound, don't care about video. thanks, joe Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] xine and piping
Hello ! Xine can play .ogg files and simultaneously show beautiful images according to the rhythm of the file. Is it possible to pipe both sound and images to an .avi or .mpg file ? TIA -- JM Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] web radio broadcasts
On Thu, 06 Nov 2003 11:04:11 -0500 [EMAIL PROTECTED] uttered: i can use media player in my vmware session but the volume controls seem to have a lower cutoff than rp in linux. is there a current product usable in mdk 9.1 that will play the format used by media player for the web broadcasts? strictly sound, don't care about video. mplayer should do it. get it from PLF sources and it should come with the necessary codecs. urpmi --media plf mplayer -- HaywireMac ++ ICQ # 279518458 Registered Linux user #282046 Homepage: www.orderinchaos.org ++ Mandrake HowTo's More: http://twiki.mdklinuxfaq.org ++ The door is the key. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help: I need my mouse back
Hi Derek: I followed your recommendations and lo and behold, the mouse is working again (after reboot). A million thanks to you, Derek. Also Merci to the folks who responded to my appeal for help. thu ps I had to open the console 'by hand' as CTL+ALT+F1 crashed the system. - Original Message - From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 05, 2003 6:13 PM Subject: Re: [newbie] Help: I need my mouse back On Wednesday 05 Nov 2003 4:29 pm, Phan N. Thu wrote: Hi everybody My mouse (a USB MiniWheel Logitech) had been detected at install of 9.1 and working perfectly for about a month.Then I got ambitious and went to Harddrake and added 'Logitech' to the default setting of USB / WHEEL. Ever since, no more mouse. I know it isn't the mouse 'cause it continues to work perfectly under Windows (dual-boot) but I don't know enough CLI commands to restore the original mouse configuration. The info I got when I do 'harddrake2' in the console is for the mouse: USB WHEEL 5BUTTONS so I presume therein lies the trouble? It's a regular 2-button wheel mouse. I need to know the proper configuration file: is it /etc/devfs/conf.d which had usbmouse.conf in it. This is where I committed the second mistake by deleting usbmouse.conf and haven't been able to restore it. Help is urgently requested and will be gratefully received. Log into a text console ( Ctl+Alt+F1 ) as root and enter mousedrake (Ctl +Alt+F7 to get back again) derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
Has anyone has any trouble installing via an ftp mirror? Aside from the need for a broadband connection, is there anything one should worry about? I've done that with Suse in the past, and it is through their list that I have found numerous mandrake FTP mirrors. They've pretty much got the planet covered. Mark - Original Message - From: Franki [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 06, 2003 2:06 AM Subject: Re: [newbie] Mandrake 9.2 ISO Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Do a google search for 9.2 iso's... Thats how I found it.. I found an australian mirror with the real ISO's (not rc2) and a local mirror of all the updates... loading it on my new webserver now. rgds Franki -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] SHould I get SuSe
I believe you, but *everything* is updated with a single command. Ah if only it really was that simple. I ruined two perfectly good installs trying that :-( Mind you that may just be my incompetance but I followed the instructions to the letter! That doesn't sound good at all. - Grant Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] halt / reboot options at login screen
Hi, Excuse if this is a duplicate, but I don't see my original appearing on the list. My system is a dual boot win2k / LM9.1 laptop. If I start my machine it defaults through lilo to linux and the login screen. Very occasionally I miss the lilo options and the machine starts up linux to the login screen. I may want to reboot immediately to win2k but there are no options appearing in the reboot / halt options at the login screen. However, if I login to my account then immediately log out, the options appear ( linux, safemode, windows etc.) Is there some way to set these options at boot up so I don't have to login and out to get them to appear? Thanks and regards, Bill W. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Mandrake 9.2 ISO
The ftp://darkstar.ist.utl.pt has the complete final isos if you like... Have fun, and please don't overload it :P Afonso Guerra Assunção -Mensagem original- De: Mark A. Lawson [mailto:[EMAIL PROTECTED] Enviada: quinta-feira, 6 de Novembro de 2003 17:56 Para: [EMAIL PROTECTED] Assunto: Re: [newbie] Mandrake 9.2 ISO Has anyone has any trouble installing via an ftp mirror? Aside from the need for a broadband connection, is there anything one should worry about? I've done that with Suse in the past, and it is through their list that I have found numerous mandrake FTP mirrors. They've pretty much got the planet covered. Mark - Original Message - From: Franki [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 06, 2003 2:06 AM Subject: Re: [newbie] Mandrake 9.2 ISO Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Do a google search for 9.2 iso's... Thats how I found it.. I found an australian mirror with the real ISO's (not rc2) and a local mirror of all the updates... loading it on my new webserver now. rgds Franki -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
On Thursday 06 Nov 2003 10:35 am, Anne Wilson wrote: On Thursday 06 Nov 2003 9:20 am, Anarky wrote: Anne Wilson wrote: On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote: you will know of the problems that have been found with LG drives. any idea of a rough ETA for that? (I've been planning my new Mandrake install for 1moth + now ;) . 'Any day now' g Don't forget that if you follow Franki's route you are installing the version with the LG problem. OTOH, I'm going to install that one anyway, since I don't have an LG drive. Any news of that DVD drive you had problems with? You suspected that 9.2 had killed it. Was it true, or was it something else? I have a cheap PC-World DVD drive here that doesn't give a manufacturer in its ID strings. I'm just paranoid enough to be worried. -- Richard Urwin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] qmake
On Wednesday 05 Nov 2003 6:35 pm, Prashant Jaikumar wrote: Hi, I don't seem to have qmake on my system, but qt is installed (I have qt designer and linguist). Can anyone tell me where to get qmake? Thanks. Prashant [EMAIL PROTECTED] richard]$ urpmf qmake huge list libqt3-devel:/usr/lib/qt3/bin/qmake huge list You have the qt runtime libraries installed, but you do not have the qt development package installed. urpmi libqt3-devel should install it OK. -- Richard Urwin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Driver for Fuji FinePix 2650 Camera
Does anyone know if drivers exist for the above camera? I am currently running ML9.1 and did not find this model listed in Mandrake Control Center. Any chance it was added in 9.2? Thanks, -Chris Tracking #: EE10BFD2E2A48344977A8928216122F8240DACB8 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] LAN not recognized on asus a7n8x-x MB
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thursday 06 November 2003 2:30 pm, gt wrote: thanks so much, i will give it a try right now (postponing all the things I really should be doing right now) :) Gideon I have to slow down and give sensible answers, sorry Gideon. )-: You'll probably need to sure you install the kernel source for the running version you have and since there were updates for 9.1 it's easiest to open a super user terminal and type: urpmi kernel-source enter It should install the correct version and dependencies for you. If you haven't installed an update kernel yet do that first by leaving out the -source above then install the source. Then run lilo -v enter in the same terminal after you have installed the packages to have access to the new kernel and when that's all done type reboot enter to use it. I'm still too much in a hurry, sorry. C. - -- Edmonton,AB,Canada User 244963 at http://counter.li.org Mandrake Linux release 9.2 (FiveStar) for i586 kernel 2.4.22-21mdk 14:34:50 up 5 days, 23:13, 1 user, load average: 0.37, 0.30, 0.25 When God saw how faulty was man He tried again and made woman. As to why he then stopped there are two opinions. One of them is woman's. -- DeGourmont -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/qr/1G11CaRuZZSIRAuqvAKCB5tvd268nlyb8VWQScRwFGE8PpACcCJkz lTHv6HmMcq+DAoeN+8m+zyw= =Qhqv -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Error loading .wav in Rezound
Ronald J. Hall wrote: You're not letting Gramofile record the whole side then split the tracks? It worked great here, never failed once on about a dozen or so cassettes (all commercial though). I've been busy fixing Rezound, got it to take my analogue audio stream and record directly some nice .wav files, which I've succeded in cropping to requirement. One .wav file has a few spikes that need doctoring a bit , and my next task is to learn how to do that . I need a tutorial on this kind of thing. Will have to see what I can find. I must say Rezound looks to be good ! John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Hardware diagnostics (old Dell)
On Tue, 4 Nov 2003 22:46:08 + Björn Olsson [EMAIL PROTECTED] wrote: Anyone here good at diagnosing hardware failures? I recently got a spare Dell Optiplex GX1 to bring home from work. It came without memory, HDD och CD, so I had to search my stock for suitable parts. But today, when I were to bring life to my creation, it simply refused to cooperate! I feel very offended and rightfully upset :) Power to diodes on front YES Power to HDD YES Power to CD YES Power to CPU fan YES Power to expansion cardYES Power to monitorYES Power to keyboard NJET And there was no signal to the monitor. I tried with two different monitors and a separate graphics card as well as the onboard one. Any suggestions welcomed Björn Thank you for your answers, all of you. The problem turned out to be a faulty memory. After I changed it, all worked well. Björn Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Broadband vs TV tuner?
Charlie M. wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thursday 06 November 2003 2:28 pm, Ronald J. Hall wrote: I have a question - I recently got cable-modem service here (hurrah!) and its been great (getting around 250k d/ls). Anyways, I had a WinTV tuner card that I removed since my TV cable now goes to my modem (what a choice! Broadband...TV...Broadband...TV...Ah, Broadband!). Is is safe to split the signal and use the WinTV card? Or will that degrade the signal and cause problems? What are other tuner card owners doing? Thanks! It would seem so D.L. My cable has been running 2 TVs, a cable modem, and two VCRs for almost 5 years now. No worries. Since it's an apartment building there's probably a booster on the line in the utility room though. I seriously doubt the TV Card will degrade the cable performance for you anyway. Just be sure of the splitter quality and have fun! (-: I have to second that. I split mine between three tv's and the wintv-go card no prob bob! -- Mike McNeese Springdale, Arkansas USA == Dual booting 98lite;MDK 9.1 stock kernel Kde 3.1 Registered Linux User #248955 liquid/acqua Theme == If obstacles are what you see in your path... Then you have lost sight of your goal! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Broadband vs TV tuner?
On Thursday 06 November 2003 05:14 pm, mike wrote: It would seem so D.L. My cable has been running 2 TVs, a cable modem, and two VCRs for almost 5 years now. No worries. Since it's an apartment building there's probably a booster on the line in the utility room though. I seriously doubt the TV Card will degrade the cable performance for you anyway. Just be sure of the splitter quality and have fun! (-: I have to second that. I split mine between three tv's and the wintv-go card no prob bob! Thanks guys, guess I'll give it a go - after I get/steal/beg/fight for it back from a friend I loaned it too when I didn't think I'd use it. grin -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] web radio broadcasts
On Thu, 06 Nov 2003 13:50:41 -0500 [EMAIL PROTECTED] uttered: Failed to create AF_INET6 socket it fills the buffer up to some arbitrary point then starts playing but it jumps, sputters and can't keep the feed coming in fast enough to replenish the cache. i've never messed with the details of these types of programs; any ideas on what i should look at as far as settings or options to help improve the datastream consistency? Looks like it has something to do with IPV6, I'm not sure how you would deal with that. google.com/linux gave me this: http://www.google.ca/linux?hl=enie=ISO-8859-1q=Failed+to+create+AF_INET6+socketbtnG=Google+Searchmeta= I'm not sure if mplayer can even deal with IPV6 connections, if that's something you have to compile into mplayer of your kernel... -- HaywireMac ++ ICQ # 279518458 Registered Linux user #282046 Homepage: www.orderinchaos.org ++ Mandrake HowTo's More: http://twiki.mdklinuxfaq.org ++ Expansion means complexity; and complexity decay. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] slow and failing uploads
On Thu, 2003-11-06 at 10:30, Todd Slater wrote: I've got a couple of php/sql apps on a server running 9.1 that will take uploads. The problem is that the uploads take forever and sometimes die before they're finished. These are done through a web interface--no ftp or anything like that. Downloads work fine. I have a hunch that this is related to firewall, but what would I check on the server to make sure it's not some config setting there? It's running at the highest security level, but pretty much a stock install of everything web-related. Todd Todd: Try to increase the connection timeout in php.ini. That might be the reason why uploads die before finishing. Regarding upload speed it is either the connection speed or the php code/library used for the uploads. Are you inserting the uploads directly into the database? If so, try uploading to a directory to check if the code inserting the upload into the database is slowing things down. HTH, Adolfo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Broadband vs TV tuner?
On Thu, 2003-11-06 at 16:28, Ronald J. Hall wrote: I have a question - I recently got cable-modem service here (hurrah!) and its been great (getting around 250k d/ls). Anyways, I had a WinTV tuner card that I removed since my TV cable now goes to my modem (what a choice! Broadband...TV...Broadband...TV...Ah, Broadband!). Is is safe to split the signal and use the WinTV card? Or will that degrade the signal and cause problems? What are other tuner card owners doing? Thanks! I split mine with no problems at all Walt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] halt / reboot options at login screen
On Thursday 06 November 2003 12:58 pm, [EMAIL PROTECTED] wrote: Hi, Excuse if this is a duplicate, but I don't see my original appearing on the list. My system is a dual boot win2k / LM9.1 laptop. If I start my machine it defaults through lilo to linux and the login screen. Very occasionally I miss the lilo options and the machine starts up linux to the login screen. I may want to reboot immediately to win2k but there are no options appearing in the reboot / halt options at the login screen. However, if I login to my account then immediately log out, the options appear ( linux, safemode, windows etc.) Is there some way to set these options at boot up so I don't have to login and out to get them to appear? Thanks and regards, Bill W. Install kdm (urpmi kdm) and replace your display manager to kdm. MCC - System -Couse Display Manager. -- Yankl Tiny IT guy. 100 % Micro$oft free. Registered linux users 181086 URL: http://yankele.com --- To mess up a Linux box, you need to work at it; to mess up your Windows box, you just need to work on it. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] how can I make a lan ( connection ) between linux-Mandrake 9.2 machine and Windows XP notebook.
On Thursday 06 November 2003 02:05 am, [EMAIL PROTECTED] wrote: Hello everybody , I want to make a lan ( connection ) between linux-Mandrake 9.2 machine and Windows XP notebook. I have internet dial -up connection on my notebook. ( this means modem adapter is on notebook , on XP machine ) . I want to make a small - home connection and get to internet through my XP machine ( notebook ) How can I do that ?? , hoce can I make linux and XP speak to each other Thanks in advance !! Hertas You need to have network card in each machine and cross 0over cable. Connect and set up Internet sharing on your Win XP box. -- Yankl Tiny IT guy. 100 % Micro$oft free. Registered linux users 181086 URL: http://yankele.com --- To mess up a Linux box, you need to work at it; to mess up your Windows box, you just need to work on it. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] slow and failing uploads
On Thu, Nov 06, 2003 at 07:36:58PM -0400, Adolfo Bello wrote: On Thu, 2003-11-06 at 10:30, Todd Slater wrote: I've got a couple of php/sql apps on a server running 9.1 that will take uploads. The problem is that the uploads take forever and sometimes die before they're finished. These are done through a web interface--no ftp or anything like that. Downloads work fine. I have a hunch that this is related to firewall, but what would I check on the server to make sure it's not some config setting there? It's running at the highest security level, but pretty much a stock install of everything web-related. Todd Todd: Try to increase the connection timeout in php.ini. That might be the reason why uploads die before finishing. Regarding upload speed it is either the connection speed or the php code/library used for the uploads. Are you inserting the uploads directly into the database? If so, try uploading to a directory to check if the code inserting the upload into the database is slowing things down. HTH, Adolfo Thanks for the tips, Adolfo. Interesting, when I'm at home the uploads are really fast--it's only when I'm on the network at work that it's slow. Makes me think it's something to do with the network now. Todd Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
Afonso Guerra Assunção wrote: The ftp://darkstar.ist.utl.pt has the complete final isos if you like... Have fun, and please don't overload it :P Afonso Guerra Assunção -Mensagem original- De: Mark A. Lawson [mailto:[EMAIL PROTECTED] Enviada: quinta-feira, 6 de Novembro de 2003 17:56 Para: [EMAIL PROTECTED] Assunto: Re: [newbie] Mandrake 9.2 ISO Has anyone has any trouble installing via an ftp mirror? Aside from the need for a broadband connection, is there anything one should worry about? I've done that with Suse in the past, and it is through their list that I have found numerous mandrake FTP mirrors. They've pretty much got the planet covered. Mark - Original Message - From: Franki [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 06, 2003 2:06 AM Subject: Re: [newbie] Mandrake 9.2 ISO Pawel Nozderko wrote: I'm just wondering: today is 6'th of november and normal people who isn't a mandrake member must wait to download a new iso - why it takes so long ? Could anybody share your iso in a public ftp !! Do a google search for 9.2 iso's... Thats how I found it.. I found an australian mirror with the real ISO's (not rc2) and a local mirror of all the updates... loading it on my new webserver now. rgds Franki -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Do you know if the ISOs have the updates included or are they the same as the bittorent ones with the LG drive patch? Joeb Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] slow and failing uploads
On Thu, 2003-11-06 at 22:42, Todd Slater wrote: On Thu, Nov 06, 2003 at 07:36:58PM -0400, Adolfo Bello wrote: On Thu, 2003-11-06 at 10:30, Todd Slater wrote: I've got a couple of php/sql apps on a server running 9.1 that will take uploads. The problem is that the uploads take forever and sometimes die before they're finished. These are done through a web interface--no ftp or anything like that. Downloads work fine. I have a hunch that this is related to firewall, but what would I check on the server to make sure it's not some config setting there? It's running at the highest security level, but pretty much a stock install of everything web-related. Todd Todd: Try to increase the connection timeout in php.ini. That might be the reason why uploads die before finishing. Regarding upload speed it is either the connection speed or the php code/library used for the uploads. Are you inserting the uploads directly into the database? If so, try uploading to a directory to check if the code inserting the upload into the database is slowing things down. HTH, Adolfo Thanks for the tips, Adolfo. Interesting, when I'm at home the uploads are really fast--it's only when I'm on the network at work that it's slow. Makes me think it's something to do with the network now. Todd Could it be some kind of asymmetric protocol? Uploading speed could be much slower than downloading speed, which can cause the php page to timeout. Where is the application hosted? At home? At work? What are the downloading/uploading bandwidths at the site where the upload are slow? Adolfo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Installing kiconedit on 9.1
Greetings All! I downloaded kiconedit-0.3.2 and ran ./configure. error 1: can't find qt libraries. I found /usr/lib/qt3 driectory and ran ./configure --with-qt-dir /usr/lib/qt3 It seemed to like it but I then got: error2: ltconfig: you must specify a host type if you use `--no-verify' Try `ltconfig --help' for more information. configure: error: libtool configure failed. I could not find ltconfig on my system. What's going on? What is a host type? mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Registered Linux User No.
Could someone please explain to me what the Registered Linux User No.xxx is that a few of you sport in your email signatures. I like the sound of that -Registered Linux User - how do you become one and does it give you any benefits other than a cool email signature? -Aidan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Registered Linux User No.
On Friday 07 November 2003 12:11 am, Aidan Holmes wrote: Could someone please explain to me what the Registered Linux User No.xxx is that a few of you sport in your email signatures. I like the sound of that -Registered Linux User - how do you become one and does it give you any benefits other than a cool email signature? http://counter.li.org/ -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] tv tunning
That's depending on your location. I'm in Indonesia can not receive any tv broadcast. Any body can help me ? --- mike [EMAIL PROTECTED] wrote: Hi , I personally run a wintv-go tv tuner along side a nvidia tnt2 32 meg video card running the latest nvidia drivers. it works absoulutely perfect! in fact, the picture is better in the pc than on the tv. Using xawtv it tunes all the channels from 1 -125 on cable . is very easy to use and setup. hope this helps. where are you located ? it will make a difference as to what's available Anarky wrote: how's mandrake on tv tuning? I'm considering buying a tv tuner .. so I'm wondering if there is hardware support for stuff like this ... how well spread is it .. any chance of having a cheapest I can find tvtuner work? Any way to check on particular models? Is there software to go with tv tuners in mandrake? How good is it? Is it just tv tuning .. or does it suport recording at certain hours or something like that ? greets thanks, Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Mike McNeese Springdale, Arkansas USA == Dual booting 98lite;MDK 9.1 stock kernel Kde 3.1 Registered Linux User #248955 liquid/acqua Theme == If obstacles are what you see in your path... Then you have lost sight of your goal! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 ISO
Do you know if the ISOs have the updates included or are they the same as the bittorent ones with the LG drive patch? Joeb No, Looking at the kernel version I have installed, it doesn't have the LG fix kernel.. The fixed kernel is in the updates directory on the same site though.. I didn't load it because I am thinking of trying packet writing on the HP 9500 burner in this unit.. If you want the LG resolved version, you'll probably have to wait till Mandrake releases it, unless you want to modify the ISO of CD1 yourself.. rgds Franki -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Registered Linux User No.
Aidan Holmes wrote: Could someone please explain to me what the Registered Linux User No.xxx is that a few of you sport in your email signatures. I like the sound of that -Registered Linux User - how do you become one and does it give you any benefits other than a cool email signature? -Aidan No other benefits, just support for the community and some cred with fellow linux users... :-) I signed onto this thing a few years ago... rgds Franki Registered Linux user: 218317 http://counter.li.org/cgi-bin/runscript/display-person.cgi?user=218317 -- Please sign our petition to encourage notebook manufacturers to offer video card upgrades just like desktops. http://www.petitiononline.com/inspiron/petition.html For free scripts, online webmaster tools, HTML, XHTML, Perl PHP tutorials and stuff, visit: http://htmlfixit.com, Free web developer resources. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com