Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
I can do that. Still, I think I don't know enough about the LMS. Could you maybe tell me a little guide. how to switch it to debug mode and then back again? HKNBG's Profile: http://forums.slimdevices.com/member.php?userid=71034 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Deezer app
I've been using with great success Deezer in flac mode, including flow & seeking in tracks :) Everything seems to move to flac these days, and I was thinking with a bit of nostalgia of my first ADSL "high speed" 512k internet access. That was a quasi-miracle then after the 33.6k (56k never worked really) dial-up modems. Well, not enough for flac with best compression and now I'm streaming multiple flac while rest of the home is watching Netflix. I'm not comparing the 60's and Y2K but just a short 15 years period. Anyway... NB: what's unfortunate on my SB's is that the miniPCI board they are using is 802.11g. Anybody have heard of a 802.11n card that would be compatible? Even if the throughput between card and main board is the same, it's would just free up some RF timeslots. LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109064 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
dborod wrote: > Thanks, that's a good idea. > > I have run into one challenge... Say I'm streaming to HomePods from LMS, > and I want to instead play something using Siri or a phone or a Mac so > as to start the playing of non-LMS content. The new content will pay for > a second and then get replaced with the LMS stream again. Is there way > for AirPlay Bridge to pause playback when some other stream begins being > played by the HomePod? Well, normally it should stop (or power off layer in LMS, depending what you have set) but that assumes that the player issues a DMCP command "device-prevent-playback=1". If not, then either it does not behaves as expected or sends another command. If you have set all log levels to info (in the plugin's settting page, not in LMS's logging page) then the raopbridge log should tell me if such command is sent or not (log will say []: remote command x) LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)
Appl3seed wrote: > Hello Philippe. > > I am in the roon trial period and was a bit annoyed by the lack of upnp > support. Until I found squeezeupnp. > It is just perfect! Everything works A OK. Many Thanks! > > I noticed a small oddity and to be honest, it is nothing. But it bugs me > for whatever reason. > > > My amp has a digital display of the volume level (0 to 99) and off > course the volume is also shown in roon remotes. > > On changes both volume levels are kept in sync in real time with the 2 > options "volume_on_play" and "volume_feedback" set to 1 in the > squeezeupnp config file > > But, for whatever reason there is always a 1 point level difference > between the volume in roon and the volume displayed by the amp. ex Roon > report vol 20, The Hegel amp will be at vol 19. > I am not sure if it is roon related (seems the max level reported to > roon is 100 instead of 99j) or something to adjust in the script config > > That is the first type I see that (with bubbleupnp volume are exactly > the same). So any clue would be welcome. I'm not sure if this is the reason why but LMS has volume 0..100 and that might explain the difference. I don't remember exactly the details (I know it sounds funny) but I've made various options to tweak max volume and response curve. You can have a look at the doc and maybe you'll find something that suits you. LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=103728 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite output to file for snapcast
bpa wrote: > The OP example shows "cat" of a file with WAV header. If OP needs a WAV > header the "-a" and "-r" will not provide it. > Don't thing a wav header is required: Snapcast docs wrote: > > [stream] > # stream URI of the PCM input stream, can be configured multiple times > # Format: > TYPE://host/path?name=NAME[=CODEC][=SAMPLEFORMAT] > stream = pipe:///tmp/snapfifo?name=default > > The sampleformat is a triple of ::, > e.g. 44100:16:2. > The PCM samples (bit depth) must be encoded signed, little endian in 8, > 16, 24, or 32 bit, where 24 is expected to be encoded in the lower three > bytes of a 32 bit word. > bpa wrote: > > Also I think when output is to a file "-o" the "-a" option is not > required as it is ALSA specific. > man page says: man squeezelite wrote: > -a > Specify parameters used when opening an audio output > device. > When the output is sent to standard output, the value can > be 16, 24 or 32, which denotes the sample size in bits. Little Endian > only. 'Various SW' (https://www.nexus0.net/pub/sw/): Web Interface | TUI | Playlist Editor / Generator | Music Classification | Similar Music | Announce | EventTrigger | Chiptunes | LMSlib2go | ... 'Various HowTos' (https://www.nexus0.net/pub/documents/LMS/): build a self-contained LMS | Bluetooth/ALSA | Control LMS with any device | ... Roland0's Profile: http://forums.slimdevices.com/member.php?userid=56808 View this thread: http://forums.slimdevices.com/showthread.php?t=113394 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite output to file for snapcast
Roland0 wrote: > Try setting both squeezelite (options -a and -r) and snapserver (conf > file) to the same (fixed) sample size and sample rate (e.g. 16 bit / > 44100 hz) The OP example shows "cat" of a file with WAV header. If OP needs a WAV header the "-a" and "-r" will not provide it. Also I think when output is to a file "-o" the "-a" option is not required as it is ALSA specific. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113394 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite output to file for snapcast
gekoch wrote: > I'm currently running a snapserver which plays the files that are stored > in the /tmp/snapfifo file. > > I tried: > Code: > > squeezelite -o - > /tmp/snapfifo > > but I only got some noise while playing a song through LMS > Try setting both squeezelite and snapserver to the same (fixed) sample size and sample rate (e.g. 16 bit / 44100 hz) 'Various SW' (https://www.nexus0.net/pub/sw/): Web Interface | TUI | Playlist Editor / Generator | Music Classification | Similar Music | Announce | EventTrigger | Chiptunes | LMSlib2go | ... 'Various HowTos' (https://www.nexus0.net/pub/documents/LMS/): build a self-contained LMS | Bluetooth/ALSA | Control LMS with any device | ... Roland0's Profile: http://forums.slimdevices.com/member.php?userid=56808 View this thread: http://forums.slimdevices.com/showthread.php?t=113394 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)
Hello Philippe. I am in the roon trial period and was a bit annoyed by the lack of upnp support. Until I found squeezeupnp. It is just perfect! Everything works A OK. Many Thanks! I noticed a small oddity and to be honest, it is nothing. But it bugs me for whatever reason. > My amp has a digital display of the volume level (0 to 99) and off course the volume is also shown in roon remotes. > On changes both volume levels are kept in sync in real time with the 2 options "volume_on_play" and "volume_feedback" set to 1 in the squeezeupnp config file But, for whatever reason there is always a 1 point level difference between the volume in roon and the volume displayed by the amp. ex Roon report vol 20, The Hegel amp will be at vol 19. I am not sure if it is roon related (seems the max level reported to roon is 100 instead of 99j) or something to adjust in the script config That is the first type I see that (with bubbleupnp volume are exactly the same). So any clue would be welcome. Appl3seed's Profile: http://forums.slimdevices.com/member.php?userid=71036 View this thread: http://forums.slimdevices.com/showthread.php?t=103728 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Spotify only plays first six minutes of a track then skips to next track in album
Sergeauckland wrote: > I've installed LMS 8.1 and added my new Spotify ID but it's still > skipping on long tracks. LMS is on a W10 laptop, and I'm controlling it > through Soundicity on a W10 tablet. > > Works fine on music files stored on the laptop, for streaming from BBC, > other internet radio stations and Radio Paradise. It only misbehaves on > Spotify and on long tracks, and not every time, but perhaps 80% of the > time. > > Really annoying! > > S I have no idea on this Serge. Perhaps you can check the server log when it happens; that's Settings > Information > scroll to the bottom of the page. And a couple of sample tracks would help others try to replicate the problem. ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=113391 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Spotify only plays first six minutes of a track then skips to next track in album
I've installed LMS 8.1 and added my new Spotify ID but it's still skipping on long tracks. LMS is on a W10 laptop, and I'm controlling it through Soundicity on a W10 tablet. Works fine on music files stored on the laptop, for streaming from BBC, other internet radio stations and Radio Paradise. It only misbehaves on Spotify and on long tracks, and not every time, but perhaps 80% of the time. Really annoying! S Sergeauckland's Profile: http://forums.slimdevices.com/member.php?userid=41695 View this thread: http://forums.slimdevices.com/showthread.php?t=113391 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] LmsUpdate and LmsRepack - Synology 8.0.* packages
Sad news but thank you so much Pinkdot for everything you have done, your hard work and sound advice :D:( manx's Profile: http://forums.slimdevices.com/member.php?userid=70875 View this thread: http://forums.slimdevices.com/showthread.php?t=111876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] LmsUpdate and LmsRepack - Synology 8.0.* packages
Synology released their beta version of DSM7.0 today. This is good and bad news at the same time. The good news is that your Syno will receive the long waited update to DSM7.0! The bad news is that (as expected) Synology updated Perl from 5.24 to 5.28, meaning that running LMS with the current LmsUpdate packages is not possible, and updating CPAN (part of LMS) to 5.28 also very unlikely. It's atleast a task I'm not going to take on. So, I'm sorry to say: but it ends here for me. (You might see 1 more update before christmas.) Thanks for your support and feedback over the years. Please keep using LMS in whatever form there is available, and keep enjoying your music! Greetings, Martin 32471 +---+ |Filename: perl_update.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32471| +---+ -DS718+, RPI 2 ('Spotifyd' (https://github.com/Spotifyd/spotifyd)/'myMPD' (https://jcorporation.github.io/myMPD/)),Aune S6 - Exposure 3010S2 - PMC FB1i-s -DS115 test server -'Logitech Media Server 8.0.0 for Synology ' (https://forums.slimdevices.com/showthread.php?111876-LmsUpdate-and-LmsRepack-Synology-8-0-*-packages) pinkdot's Profile: http://forums.slimdevices.com/member.php?userid=34644 View this thread: http://forums.slimdevices.com/showthread.php?t=111876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)
BBPlex2020 wrote: > Well, theres more problems than 44khz. It started acting wired with othr > resolutions too. Its ramdom now. I play some 96khz anits ok, then some > 44khz and its ok. Next time it doesnt work. Its sends the stream and > UPAA receives it but sometimes it plays sometimes dont. > Now i activate trasncode for Flac and its more stable. Not so much > errors. > > Has anyone tries the bridge with USB Audio Player Pro android app? For > me, its the only app for android that sends the correct sample rate for > my USB DAC. All other app (Bubble upnp, Jellyfin, etc) gives me a fixed > rate of 192khz or 48khz. > UAPP nails it everytime. Do you guys know any other app for android that > works well with the bridge and outputs the correct sample rate? > > Thank you guys. Take a log (see plugin settings, I dont need server.log but UPnPBridge.log, youll know where it is or how to copy/paste it in that setting page) LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=103728 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Spotty - timed out Waiting for a Token
pavowren wrote: > i know it is *hard* to believe, but i have had issues when connecting to > 5 ghz ssid. > i'm certain that you can take out that v4.0.6 disable-asynch option, > though i do not know the situation with the other fellow that was having > the token problem. > > in any case, at this point, > Spotty is running perfectly! no skipping of tracks, no delays... > thank you very much for your work and attention. > > if you have ANY idea as to how and why 5ghz a.p. would cause such > issues, > i am very curious to know. my searches have not turned up this thing > about DFS: > > "This mechanism is known as Dynamic Frequency Selection (DFS) and is > designed to mitigate interference to 5GHz radar by WLANs." Old thread, but it saved me! I am a Squeezebox user all the way back to the SB2 and therefore also a user of Spotty since day 0. I have experienced verand experience few problems with it. Then last week it suddenly gave up on me. A non-responsive Orange Squeeze, and also not working via the LMS web interface. So I updated LMS (on a Synology NAS). I updated the Spotty plug-in. I deleted the approved accounts. I re-added my account. I generated (although I never needed that before) a Spotify Client ID. All this to no avail. Spotty still refused to function. After inspection the log files I saw that Spotty kept complaining : "Plugins::Spotty::API::Token::_killTokenHelper (179) Timed out waiting for a token" Then I read this thread. And stumbled upon the mysterious healing powers of 2.4GHz. In my situation there is no wireless between my NAS and my network. However, it made me realize that the problem might be somewhere in my local network. My entire network is IPv6 capable, all the way to the internet. And instead of peace it gave me headaches before. So I switched IPv6 off on my NAS. And lo and behold, Spotty started working again immediately. Flawlessly. No more timed out tokens. So don't ask me why this was no problem before. And don't ask me why I still try to have an IPv6 compliant network. I have no idea. I do know that I am a very happy user of Squeezebox/LMS/Spotty again. Also because I fixed it again my daughter thinks I' god, at least for today :-) And who knows, maybe this helps someone else. Paulussie's Profile: http://forums.slimdevices.com/member.php?userid=144 View this thread: http://forums.slimdevices.com/showthread.php?t=112084 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
mordac wrote: > Many thanks to you Philippe for the great work on supporting this > community. > > unfortunately, plugin does not work today after upgrading to 0.126.2 I dont think its linked to 0.126.2. Set log to debug, try to play one track. There will be a long trace in server.log. Put it in a zip and send it to me LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
mherger wrote: > > Thanks, Michael. I've uploaded the scanner log to Dropbox. Note that > > after this scan, The Cars now have an Artist Picture, but Johnny Cash > > still does not. > > Thanks! That log was very helpful. Showed another issue with the > placeholder file, too... An update is on its way to you. > > -- > > Michael Fixed it! Thanks so much! mps's Profile: http://forums.slimdevices.com/member.php?userid=36351 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Success: MusicIP and Spicefly Sugarcube running on Raspberry Pi
I recently updated my raspberry pi4 to the latest operating system which is still Debian Buster based. Since the update (I assume) MusicIP no longer works. I can still see the webpage at port 10002 but nothing works. I stopped the server and restarted it and I see the result in the attachment. I can't remember seeing the errors after the server starts before. Any ideas? +---+ |Filename: musicip.JPG | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32470| +---+ slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=106958 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] Problem picore player in combination with lms 8.0 november
Hi, First of all my excuses form my bad English. Until the end of october I did not have problems (using lms version 8.0) The beginning of november I updated lms. After this I could, play everything except high definition audio from qobuz. (using allo digione with spdf/BNC connection.) Only noise!! Playing Qobuz using usb connection no problem. Playing high def audio from my nas no problem(using allo digione with spdf/BNC ) Using lms version 7.9.4 or 7.9.3 or 8.0 before november no problems. So, after update lms 8.0 in november the problem started only with using Qobuz high def audio in combination with picore player with allo digione.(or hifiberry digipro) Nas music no problem. After this I tried squeezelite player with allo digione from max2play. No probleem at all!!. Other players (transporter/squeezebox) no problems I only have problems using Qobuz high definition audio in combination with lms 8.0 after november update, in combination .with picore player with allo digione (or with hifiberry digi pro) with spdf/BNC out. Now I use lms version 7.9.4 and I have no problems at all. What can I do to use the latest lms version (8.0/8.1) without problems with qobuz high definition audio and picore player with allo digione? Leonardus1's Profile: http://forums.slimdevices.com/member.php?userid=71035 View this thread: http://forums.slimdevices.com/showthread.php?t=113395 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)
BBPlex2020 wrote: > Hello Philippe. > So, i´m trying to use the plugin with UAPP as a renderer on my > Smartphone. Everything seems to work right but there is one (major) > thing that is not working... I can play all sample rates but 44khz does > not play :( > It´s very strange. I can play 192khz, 96Khz but no 44khz?? I play 192Khz > 24bit with no problem... Dont know what to do as i already tried some > things like setting max sample rate to 192 but no good.. > > Thanks a lot for your help :) Well, theres more problems than 44khz. It started acting wired with othr resolutions too. Its ramdom now. I play some 96khz anits ok, then some 44khz and its ok. Next time it doesnt work. Its sends the stream and UPAA receives it but sometimes it plays sometimes dont. Now i activate trasncode for Flac and its more stable. Not so much errors. Has anyone tries the bridge with USB Audio Player Pro android app? For me, its the only app for android that sends the correct sample rate for my USB DAC. All other app (Bubble upnp, Jellyfin, etc) gives me a fixed rate of 192khz or 48khz. UAPP nails it everytime. Do you guys know any other app for android that works well with the bridge and outputs the correct sample rate? Thank you guys. BBPlex2020's Profile: http://forums.slimdevices.com/member.php?userid=71031 View this thread: http://forums.slimdevices.com/showthread.php?t=103728 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
mordac wrote: > Many thanks to you Philippe for the great work on supporting this > community. > > unfortunately, plugin does not work today after upgrading to 0.126.2Seems OK > for me. Do no tracks work for you? Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
I have to agree to mordac. I'm also on version 0.126.2. Unfortunately it doesn't play any songs anymore and I get the error in the log. Still, I have to admit that I already had the problem with version 0.126.1 yesterday. Plugins::YouTube::ProtocolHandler::__ANON__ (422) no stream/DASH found Unfortunately, clearing the cache on page 99 did not work. Nevertheless, I would also like to thank you, because the plugin is really a masterpiece (even if there are sometimes problems with playback) HKNBG's Profile: http://forums.slimdevices.com/member.php?userid=71034 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
mherger wrote: > An update is on its way to you. This update seems to work! I added a new album from a new artist and I got a new jpg in the directory! Great work! Thank you! pi4 4gb picoreplayer with lms and squeezelite for usb pi3b+ (7\" display, hifiberry dac+ pro) picoreplayer with squeezlite/jivelite for hifiberry and bluetooth headphone two airport express ikea symfonisk carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite output to file for snapcast
gekoch wrote: > I'm currently running a snapserver which plays the files that are stored > in the /tmp/snapfifo file. > So you can > Code: > > cat someWaveFile.wav > /tmp/snapfifo > > and then it plays the song to all snapcast clients that are currently > connect to this server. > > I tried: > Code: > > squeezelite -o - > /tmp/snapfifo > > but I only got some noise while playing a song through LMS > > Has someone already got this working? IIRC what is saved is a PCM stream. You need add a WAV header to tell any player the format of the PCM stream such as sample rate , sample size, endian, signed/unsiged etc. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113394 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] squeezelite output to file for snapcast
I'm currently running a snapserver which plays the files that are stored in the /tmp/snapfifo file. So you can Code: cat someWaveFile.wav > /tmp/snapfifo and then it plays the song to all snapcast clients that are currently connect to this server. I tried: Code: squeezelite -o - > /tmp/snapfifo but I only got some noise while playing a song through LMS Has someone already got this working? gekoch's Profile: http://forums.slimdevices.com/member.php?userid=71033 View this thread: http://forums.slimdevices.com/showthread.php?t=113394 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
Many thanks to you Philippe for the great work on supporting this community. unfortunately, plugin does not work today after upgrading to 0.126.2 mordac's Profile: http://forums.slimdevices.com/member.php?userid=31158 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
cpd73 wrote: > If you can, somehow, change the 'playlist_timestamp' in the status > message then Material (and probably others) will update the current play > list (queue). Thanks, I'll have a look. expectingtofly's Profile: http://forums.slimdevices.com/member.php?userid=63263 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
expectingtofly wrote: > > There is probably something I should be doing to tell it to to update > meta data on the items in the playlist once the data arrives, as other > plugins don't have this problem, I'll have a look. If you can, somehow, change the 'playlist_timestamp' in the status message then Material (and probably others) will update the current play list (queue). *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: Reliable plugin for resilient HTTP connections
cmelia.usa wrote: > > > I installed LMS, Spotty, and Reliable on a Raspberry Pi 4 B running the > latest version of Raspbian and it worked perfectly. No dropping. > > Chris Glad to hear you resolved it Chris. It can be frustrating getting real interested in a podcast and then..:mad: I am running pcP on a 3B+, and did not experience your dropping (since adding reliable). So it's good to hear that we are (basically) seeing the same thing. Just curious, same version of LMS? Jim Redrum's Profile: http://forums.slimdevices.com/member.php?userid=33806 View this thread: http://forums.slimdevices.com/showthread.php?t=112931 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
The Natural Histories - Fleas program plays fine for me. I updated to the latest Sounds release before trying & am in the UK VortexBox 2.3 (Fedora Rel 20) on old Celeron laptop with mounted 2TB drive. 2 x Squeezebox Touch, one on Yamaha YSP1000 soundbar with XLS300-PR sub, one on Naim NAIT 3R with B P4 speakers both of 1998 vintage. PC desk using server's built in VB (Linux Squeezlite) player, 2 x Android TV boxes with option to run Squeeze Player, various Android tablets and phones with option to run Squeeze Player. properjob's Profile: http://forums.slimdevices.com/member.php?userid=42088 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
"Natural Histories - Fleas" plays on the App at rel 2.7.0 (didn't try on an earlier release & am in ) VortexBox 2.3 (Fedora Rel 20) on old Celeron laptop with mounted 2TB drive. 2 x Squeezebox Touch, one on Yamaha YSP1000 soundbar with XLS300-PR sub, one on Naim NAIT 3R with B P4 speakers both of 1998 vintage. PC desk using server's built in VB (Linux Squeezlite) player, 2 x Android TV boxes with option to run Squeeze Player, various Android tablets and phones with option to run Squeeze Player. properjob's Profile: http://forums.slimdevices.com/member.php?userid=42088 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
d6jg wrote: > > Now that BBC Sounds plugin has matured a little and I believe is no > longer reliant on BBC iPlayer is there reason to keep the latter plugin > ? > Correct, it has no connection with the BBC Iplayer plugin. But it is good to have choice. d6jg wrote: > > Does BBC Sounds automatically choose the highest resolution stream > available ? > Yes, it chooses the highest bitrate available. Which is usually 320kbps in the UK and 96kbps outside the uk. expectingtofly's Profile: http://forums.slimdevices.com/member.php?userid=63263 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
tallpaul wrote: > It's ... almost ... fixed. The last item in the playlist still doesn't > show its info or thumbnail. > > 32463 > > This applies even with a one item playlist where the info shows in the > now playing area but not in the playlist below. > > It smells a bit of a for loop conditional using '<' rather then '<=' but > what do I know? Refresh your browser and it would show it. :) The first time it asks for the meta data for an item in the playlist, the plugin goes off to the BBC to ask for it, once it has it, it saves it. If I told it to wait until the BBC has returned it then I cold potentially block the whole of your LMS until it arrives. Its just the browser controllers aren't asking again for the meta data on that item until you update the playlist (by adding something, or refresh the browser) There is probably something I should be doing to tell it to to update meta data on the items in the playlist once the data arrives, as other plugins don't have this problem, I'll have a look. expectingtofly's Profile: http://forums.slimdevices.com/member.php?userid=63263 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Jazz Groove Support
ericj wrote: > No plugin, but there are direct links available for two of the streams > See > https://jazzgroove.org/listen?channel=mix1 > for details. > The URL's are both MP3 128k: > > http://east-mp3-128.streamthejazzgroove.com/stream > > http://west-mp3-128.streamthejazzgroove.com/stream > > Enter in Tune In URL under radio and can be saved to favorites. Not the > hi def streams, but a nice addition. Thanks for pointing this out Seems like these feeds have ceased working, anyone else experiencing trouble, any alternative feeds? location 1: lms 8.0 on win 10 brix server, x2 sb radios, x1 touch, x1 controller : location 2: lms 8.0 on win 10 brix server, x2 sb radios, x1 duet receiver, x1 controller : alexa mediaserver smart skill, material android, squeezelitex control staresy's Profile: http://forums.slimdevices.com/member.php?userid=807 View this thread: http://forums.slimdevices.com/showthread.php?t=111294 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
A general question(s) if I may. Now that BBC Sounds plugin has matured a little and I believe is no longer reliant on BBC iPlayer is there reason to keep the latter plugin ? Does BBC Sounds automatically choose the highest resolution stream available ? VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* - Joggler & SB3 -> Onkyo TXNR686 -> Celestion F20s *Office* - Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* - SB Touch ->Denon AVR ->Mordaunt Short M10s + Pioneer ceiling speakers *Guest Room* - Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
BUG FIXES: - Fixed an issue preventing some streams not playing outside of the UK Wonderful - thank you for your quick action. fmanchu's Profile: http://forums.slimdevices.com/member.php?userid=33960 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce : BBC Sounds Plugin
expectingtofly wrote: > Yes, sorry, I introduced that bug when I changed the way the meta data > worked for the live streams. It stopped providing the metadata for items > in the playlist. It will be fixed in the next release It's ... almost ... fixed. The last item in the playlist still doesn't show its info or thumbnail. 32463 This applies even with a one item playlist where the info shows in the now playing area but not in the playlist below. It smells a bit of a for loop conditional using '<' rather then '<=' but what do I know? +---+ |Filename: Screenshot_2020-12-08_10-23-44.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32463| +---+ http://about.me/tallpaul Server: Intel Pentium G3420 3.2GHz, 2 core, 4GB, Ubuntu 16.0.4LTS SBS 8.0.0 - 1605892076 Players: 'piCorePlayer' (https://sites.google.com/site/picoreplayer/home), Boom, 'SqueezePlayer' (https://play.google.com/store/apps/details?id=de.bluegaspode.squeezeplayer) on various Android devices, plus squeezelite clients on house PCs tallpaul's Profile: http://forums.slimdevices.com/member.php?userid=29046 View this thread: http://forums.slimdevices.com/showthread.php?t=113045 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Thanks, Michael. I've uploaded the scanner log to Dropbox. Note that after this scan, The Cars now have an Artist Picture, but Johnny Cash still does not. Thanks! That log was very helpful. Showed another issue with the placeholder file, too... An update is on its way to you. -- Michael ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: New versions of erlands plugins
erland wrote: > Where did you find the non working link ? A bookmark. I've probably had it for years. No problem. :) LMS 7.9.3 on PC, Xubuntu 18.04, FLACs 16->24 bit, 44.1->192kbps. 2 Touchs & EDO. LMS plugin UPnP/DLNA Bridge to MF M1 CLiC (A308CR amp & ESLs) & Marantz CR603 UPnP renderers. Also Minimserver & Upplay to same & to upmpdcli/mpd PC renderers. Squeezelite to Meridian USB Explorer DAC to PC speakers/headphones. Wireless Xubuntu 18.04 laptop firefox/upplay or Android 'phone with Squeeze-Commander/BubbleUPnP controls LMS/Minimserver. PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=49483 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins