SD> FS: Shelby Lancer and Daytona Parts
I am moving to a new place and need to sell parts I wont need on either of my two current projects since I dont feel like moving or hoarding all this stuff hopefully this will be the last move for a while. The new place has a 4 car garage with second floor storage, so I should be happy there. Everything is located in zipcode 17403, York, PA. Make offers. The following is a link to my Ebay Store: I have a few Shelby items here as well as some other stuff and many more items will be listed this weekend and will continue to be listed until I clear out HYPERLINK "http://stores.ebay.com/Bauer-Parts"http://stores.ebay.com/Bauer-Parts In addition to that, I have: -Decent set of 1987 Shelby wheels and center caps Make offer -1987 Shelby Lancer parts car. This is basically a shell, but it has good outer metal. I already took the hood and cut one quarter panel off. Tell me what you need and what you want to spend. -Almost complete interior from a 1987 Shelby lancer in decent shape. -Brand new gray carpet for a 1987 Shelby lancer -2x good lancer front bumpers, both red. No rips or tears, but some small scuffs. -2x Shelby steering wheels. One has the horn, the other doesnt. Both have deteriorated foam and will need to be reworked. -1 Set of front enthusiast seats in gray cloth. These didnt meet my standards of cleanliness, but they werent bad enough to pitch. There are several small burn holes, but no tears. The seats also have a slight yellow tint to them. Thank you, Brian No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.487 / Virus Database: 269.13.27/1020 - Release Date: 9/20/2007 12:07 PM CONFIDENTIALITY NOTICE: This email may contain confidential health information that is legally privileged. This information is intended for the use of the named recipient(s). The authorized recipient of this information is prohibited from disclosing this information to any party unless required to do so by law or regulation and is required to destroy the information after its stated need has been fulfilled. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of this email is strictly prohibited. If you receive this e-mail message in error, please notify the sender immediately to arrange disposition of the information. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Cleaning out garage sale
It's been a long time since I've posted on here and have since lost interest in the FWD scene. I have many other responsibilities and due to the recent storms and flooding, I need foundation work on my house...so...Everything must go. I have already scrapped the Caravan,Duster, and Shadow projects so I have a lot of parts: First and foremost is my 89' Daytona Shelby. I have a lot of $ into it and it is in great shape with 81K on the clock. I'm looking for $5,000 obo Specs and pics to those interested...If no takers it will go to e-bay and probably to some young punk that won't appreciate it. 89' 2.5 bored .030 over stock mahle pistons. balance shafts removed, rotating assembly balanced. ARP rod and main bolts. Brand new casting head with big valves, ported, Ported intake and exhaust manifold. Comp cams dual valve springs, titanium retainers, new 89 roller cam, adjustable cam gear, MP high volume oil pump, NEW NS1 tensioner pulley, new intake bolts and exhaust studs and nuts from FWD performance. MP head gasket and head bolts, 52 mm TB, Stock rail and injectors. Bottom end has 600 miles on it..head has NEVER been ran. Head wwill need plug removed for turbo coolant supply line. other than that it's a drop in and go. $1500 FIRM 15" White Pumpers full set $200 15" Silver pumpers 5 in all$250 16" Silver pumpers full set$250 all have center caps 89' rebuilt auto trans bought with 200 miles on it. still in crate from when I bought it $250 used 3500 Stall Convertor for above trans(still in box from when i bought it) $75 89' Caravan stock grill $20 89' Caravan custon made grill and headlight bezels $75 pics available 89' Caravan carbon fiber(look) dash $25 87' Shelby Valve cover, excellent condition $250 89' Daytona Valve cover 1pc gasket style $50 Front engine mount with new MP hard mount intalled $50 MP side engine mount not installed $20 S60 injectors $50 GM 3 Bar map sensor $25 Grainger Valve $20 Bosch alternator 90A $20 Dawes Devices A/F monitor with instructions $25 Big can wastegate actuator NEW $35 89' CSX Grill...modified to fit 92 Duster...no mounts $50 Talon BOV with pipe $50 Apex BOV $75 2 1/2" Swingvave $50 2 1/2" Down pipe (2 available) $25 ??? Brand 20 psi boost gauge $10 Autogauge 20psi boost gauge $20 83'? Charger cowl hood scoop $40 89' Daytona Stock intercoler$50 Triple core intercooler $200 Stock upper I/C hoses flex type $10/ea (2 avail) Stock TII turbo intake hose$50 Cold start injectors 2 available$15/ea. All prices do not include shipping. I will not ship the heavy stuff pickup only. pics on all available upon request.That's all I've come across so far...there is much more to come. Check the link below for pics of some of the stuff. Josh Leib Valparaiso Indiana 89' Daytona Shelby 89' Caravan SE turbo RIP 05' Ram QC Hemi 4x4 www.csx145.50megs.com/photo6.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS shelby style grill for a lebaron.
fs shelby style grill, very rear, only seen two of these ever, got mine after 2 1/2 year search. $75.00 free shipping, [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) heres the other one i seen _Chrysler LeBaron Convertible Net Ring_ (http://www.carr.org/~gripper/lebaronconvertible.html) pics here, of mine_Webshots Community - elim80r's Community Page_ (http://community.webshots.com/user/elim80r) ** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 86' GLHs Race Car Project
I hve an 86' GLH-s which is in pieces. The body is straight but has had significant rust repairs to frame rails. The roof has had a sun roof, it was filled in w/sheet metal. bondo has popped off. Interior has been stripped of seats and carpet. It has a mopar bolt in roll bar and a butler built racing seat (not mounted) The engine compartment has been gutted. The passenger side lower control arm is off and ready for poly bushings. Driver side is stuck, still on the car. Package includes rebuilt short block bored .040 over with new pistons rings. Crank has been ground .010/.010 w/new bearings. Original transmission w/McLeod clutch and 555 from 87' Daytona with heim joint conversion to 86' shifter. 3 Ori8ginal shelby wheels and set of swiss cheese wheels. Several computers, stock and stage II. Plus bunches of other miscellaneou parts, gaskets, shifters, rear disk conversion calipers, axles, poly bushings, head bolts, turbos, etc. At this point will sell as a package only to first reasonable offer. Must be picked up within 1 week and will need to have front sustpension reassembled to roll onto trailer. Located in Lynchburg, VA. 24502 Thanks for your interest, Steve Nattsas ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: via Ebay: Shelby #488
In a message dated 7/11/2007 10:12:23 A.M. Central Daylight Time, [EMAIL PROTECTED] writes: Search Item # 250141768275 Some PUTZ did a buy it now from England and then deleted his ebay account. So now that is cost me another $50, here's the new Listing Number 250142008874 Steve ** Get a sneak peak of the all-new AOL at http://discover.aol.com/memed/aolcom30tour ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: via Ebay: Shelby #488
Search Item # 250141768275 The full story is there. Buy it now for $2600 Reserve almost half Thanks. Steve Kalmes (trying to reduce the fleet to 4) ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS shelby style grill, for lebaron
easy to install, unbolt old grill epoxy this one on, very hard to find grill $75.00 [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) _Webshots Community - elim80r's Community Page_ (http://community.webshots.com/user/elim80r)look on page 2 ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS 89 T2 Lebaron
I have an 89 Chrysler Lebaron For sale. It is a Factory Intercooled turbo 2 car. It is Gold with beige leather interior. It has a factory sunroof and factory slave CD player that works great. It has power locks,windows, mirrors. 16" Honeycomb wheels, power enthusiast seat. The original motor is gone, the car has an 88 T1 engine in it. The car was a very dependable daily driver, but it now has a blown head gasket. (I assume, no compression in cyl 3 and 4). The tranny has been replaced with a a-568 out of a 91 Spirit R/T, It has a neon short throw shifter and an SRT-4 Shift knob. The car has 94,000 miles on it and the engine has just over a 100,000 miles on it. The car is located in Lancaster PA 17545. Asking $1200 _ Local listings, incredible imagery, and driving directions - all in one place! http://maps.live.com/?wip=69&FORM=MGAC01 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS lebaron grill, shelby stlye
used rare lebaron grill. looks like a shelby csx grill. only seen one other online, all you have to do is unbolt your grill and epoxy this one on, dont have any pics yet, carlisle all week, $75.00 for the grill [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) 717-578-4149 ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD>FS: T1 intake and K frame
I have a T1 intake from an 86 laser with throttle body and fuel rail. All in pretty good shape except the injectors are pretty old and have been in storage a while. Would like to get $20 plus shipping. Also have a K frame. I don't remember what it was from. It has parallel pivot, stamped A arms. The sway bar is about 1.25" in the middle and tapered to about 1.125" at the ends. Would like to get $75 and prefer that buyer pick it up. I guess it could be shipped but I don't know where I would find a box for it. I will accept offers. The intake is with me in Woodbridge NJ. The K frame is at my parents' in Toms River, NJ. Thanks. David Batzle. TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. http://tv.yahoo.com/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS Shelby Dakota
#883 Red Fresh rebuilt engine using a few performance parts. 109,000 miles. Pumper wheels #2 condition. New paint and NOS decals $6,000 586-214-3814 Rob -- Current Rides: 1989 Shelby Dakota #883 Red 1969 Superbee 440/4-spd Past Rides 1992 IROC Daytona V6/5-spd 1988 Lancer Shelby TII/5-spd ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE SD> FS- 90 VNT
better off selling a different car outta your collection. shelby dodges arent worth selling. cant get enough for em. better off keeping it, and enjoying it. i am keeping my 88 Z until doomsday. even kept it thru my divorce if that tells you anything. laterz mat ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS- 90 VNT
How much is a 1990 Daytona Shelby VNT worth. I have owned this car for 8 years and it is my baby. I'm married now and bought a house and have to many toys to keep. I was thinking about letting this one go. The car has about 140k on it and a new turbo about 10-20k ago. The car is white with the pumper wheels and is in good condition but has some scratches and peeling paint. [EMAIL PROTECTED] Jeramie http://im.live.com/messenger/im/home/?source=TAGHM_APR07 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: '93 Minivan, 2.5 Turbo, intercooler, 568, Quaife & More
Hi all, This was forwarded to me by a friend. He's getting out of his minivan and looking to sell. Please contact him and not me as I have no real information on the van. Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) _www.Mopartek.com_ (http://www.mopartek.com/) In a message dated 4/25/2007 12:51:33 P.M. Eastern Daylight Time, [EMAIL PROTECTED] writes: Hi Cliff, Sadly, I'm parting out my 1993 Minivan. It includes a "never-raced" (10,000 miles since complete rebuild) 90-91 A-568 with Quaife ATB. Plus many other goodies: See the posting with complete details at: _http://saltlakecity.craigslist.org/pts/317387637.html_ (http://saltlakecity.craigslist.org/pts/317387637.html) Also more pictures and details at: _http://hhscott.com/93tmv/_ (http://hhscott.com/93tmv/) Could you pass this info along to any others that may have any interest? Lee Shuster Salt Lake City 888.273.0066 ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: L body rad/cooler,air box & hoses,NOS Shelby Items,GLHT GFX & More
Hi all, I have a bunch of post move items up on ebay now. A collection of items here _http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek_ (http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek) that include NOS Shelby & Spirit R/T decals and a host of other items so have a look. Thanks, Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) www.Mopartek.com ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: '85 Omni GLH Turbo
For Sale: 1985 Dodge Omni GLH $600 o.b.o. (may consider selling off part-by-part) cosmetically: grey exterior, paint is not great, however it is a low rust car (car has spent last 5 years in storage), just some surface rust, missing/broken mirrors, bumpers, bodywork, and trim, light front end damage, light rear end damage, light lenses (rear brake, reverse and turn signals) need replacing (but work), grey interior not in great condition mechanically: cylinder 4 is blown, however engine was rebuilt in 2001 and overall is strong, it is low mileage engine (and turbo) cause car has been parked since cylinder blew, at time of rebuild (2001) car was converted to T2 status: intecooled, new T2 computer, new injectors, T2 manifold, Grainger valve, etc, a new turbo was installed at this time also, ran strong until cylinder 4 blew - however, it still runs, and may be able to drive home - car located in Southeast Michigan (Farmington) area features: TII manifold plus intercooler (replaced the TI log manifold, still have it) grainger valve newish injectors (not new in terms of years, but new in terms of limited usage) turbo is relatively new (rebuilt unit from Superior Turbo & Injection in Detroit) trunk mounted battery cherry bomb type muffler with side exhaust (exhausts on drivers side) Autometer boost gauge (3) computers: stock 85 GLH p/n 79-7243 mopar TIp/n P4532325 mopar TII p/n P5249670 support / documentation: complete factory workshop manuals in good condition (3 books in total) Haynes manual, Chiltons manual, 3-ring binder w/ lots of Turbo Dodge info extras: a complete extra set of rims (aluminum pizza rims) additional (not installed) 2.5 Flowmaster muffler (40-series, 42543), never used (still in box) contact: <[EMAIL PROTECTED]> TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. http://tv.yahoo.com/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS BUilt GLHT
posted it on craigslist http://minneapolis.craigslist.org/car/307496408.htmlyou can see a few pictures there and also my BM vbgarage http://boostedmopar.com/forums/vbgar...do=view&id=123I'll take 6K SoonI am selling my 1985 GLH Turbo, I have built this car with thought. It is not practical for me right now. I do not have the space for it or time to enjoy it. I mostly travel with my wife and she refuses to get back into the car. It is fast, handles like no other car I have been in or driven and braking will make your passengers want to cry 2.2L Common Block .040 Wisecos, File fitted rings, Forged crank and rods, crank ground 10/10 Clevitte 77 Rod and main bearings, New intermediate shaft bushings installed (distributor shaft) rods resized and new wrist pin bushings installed Block was bored and honed, decked, mains line bored and hot tanked ported oil pump housing and block to filter new oil pick up tube, New brass frost plugs ARP Rod, Head Bolts and Crank Studs All new Gaskets and seals - Motor Built by Todd Nelson Turbonetics T3/T4 50 trim .63 ar stage 2 hotside Turbo Full 3" Mandrel bent Exhaust w/Dynomax welded race muffler NO CAT Large NPR intercooler -Shortened 3 rows capped and TIG welded mounting plates 2.5" plumbing w/1G talon BOV -mandrel tubing, billet bov flange Ported head, MP head gasket and 2 piece intake w/52mm mouth 52pph injectors walboro 255 Fuel pump - New rubber underhood fuel lines 3 bar map, SMEC computer and D-cal tuned - Complete flashable setup minus laptop, (pcmcia COM port card goes with car) A568 tranny with 3.85FD, neon shifter and P body cables, Fidnaza flywheel & under drive pulley -new belt Power steering removed, 1G Neon Strut tower bar Solid rear home built adjustable Trans mount RPS 6 puck Carbon and Kevlar clutch, high pressure RPS pressure plate Adjustable Koni struts w/Eibach coil overs -225Lb rear and 275Lb front 1 1/8" front and 1" rear polybushings.com sway bars Polyurethane Bushings in all 4 corners Minivan front calipers, Iroc Daytona vented rear disc #4 master cylinder new front rotors and 1 new front caliper (other checked fine and is used) Other mods/pros Nipendenso 90 amp alternator, manual fan switch w/relay Battery relocated to trunk with marine battery box 3 gauge motor/intake ground and also separate 4 gauge intake ground Ported water pump housing and old style pump -new water pump Oil pan baffles and relocated turbo oil drain back tube to center mid pan New axles, cardone select passenger and Napa driver side H4 Converted head Lights PIAA dual beam driving/fog lights auto meter 2 5/8 boost and EGT Dawes 4 light A/F ratio meter Momo Corse steering wheel and adapter (dodge pentastar horn button) HKS in Cabin Boost controller powder coated chrome rack boot guards, freshly painted K frame and A arms 16" unilug 5 spoke rims w/ Dunlop SP sport W10's 205/45/16 50% & 75% tread left New Windshield professionally installed last fall before car went to storage Recent front wheel alignment, New select plug wires This is a west coast car and it has never been driven in any Minnesota snow or smoked in. The paint is fading and needs attention, It is a NON A/C car. The interior is a 7.5-8/10 No rips or tears, No heavy stains, the rear seat is real clean and the front seats are a little dirty but should clean up nice. The previous owner also removed the carpet from the car and undercoated the floor, I believe he did this to lighten up the car some. I did remove a bit of the undercoating so I could see how nice the floor was, the paint under it looked new, the undercoating is also in the trunk and spare tire area. I cleaned up and reinstalled the carpet, it does have stains, it did clean up well. The center arm rest is not cracked up but does not stay foward, so it might need a spring or something simple for it to lock forward. The door panels are clean and nice, the upper sill trim on the doors is a bit discolored along with some of the trim. The headliner does need to be replaced, also the rear hatch/trunk cover that mounts to the rear seat was removed before I owned the car. I planned to recolor the trim pieces and paint the car to finish it. When I Bought the car the windows were already tinted and they also have a slight fade to them but still look good. There is a very small spot of surface rust on the inside of the driver door, The rest of the car has no rust to be found, and is really clean. (few dings) it has been my daily driver since the build and has almost 2100 (yes only two thousand) miles on it since, (before winter) it was broken in properly and oil changed every 500 miles so far, The next oil change is planned for Mobil 1. I have turned up the boost gradually to 20PSI and have since backed it down to 18 to gain some traction back (would spin at 60mph) all of the parts for the mods list were bought new except for the 1G talon BOV, Iroc rear brake setup and of course the intercooler and transmission. I have a spare a523 transmission with a 3.50FD to go with
SD> FS: 525/555 hybrid transmission
Hi all, I'm offering up one of my 525/555 transmissions This is the combination that started my hybrid adventure. I built my first one 12 years ago for a friend with an '86 GLHS that wanted the strength and better ratios of the 555 along with the 3.56 FD ratio of the stock 525 and a transmission that wouldn't require cutting of his very nice GLHS, a bolt in custom transmission shall we say that requires no additional parts like axles, shifter & cables. We added his Shelby Cam & Pawl posi unit and a Lambros moly plate and this transmission still runs today in his car. 525/555 transmission. 555 1st thru 5th gears & input shaft. 3.56 FD intermediate shaft and ring gear from the 525 and stock 525 differential. Rebuilt with new bearings, seals, shift fork pads and brass as needed. Upgraded 1/2 shift fork to the HD piece from the 555 along with an '87 525 case that uses the stronger differential bearing retainer bolts on the left side. $750.00 Add a Chrome moly plate for $100.00 and get a drain for free. Shipping is by way of Fedex and calculated by your ZIP code to a work address. Thanks, Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) www.Mopartek.com ** See what's free at http://www.aol.com. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Low Mileage 1987 CSX
From: "Jodi - Alpine Autosport" <[EMAIL PROTECTED]> Date: Fri, 9 Mar 2007 11:33:05 -0700 Here is the info: 1987 Shelby CSX Turbo Coupe 21k original miles Vin # 1b3bs44e1hn529618 Number 40 of the 750 Carfax verifies mileage and no accidents Price is $6,900 Would be willing to ship (at cost) or if coming into town I would be happy to pick up to give you ride to office (n/c to pick up from airport of course). Have boatload of pictures to share. This car is in excellent condition. Previous owner says never been outside of garage at night, no interior problems (looks brand new), outside is sharp too. We have it garaged here at office. The issue is of space and interest. My boss bought it, thought it would sell, but nothing. Now wants his original buying price out or taking it to the auction. This definitely would devalue the car as there would be less of a history on it as we keep all paperwork on wholesale deals. If anyone is interested, they can contact me directly - 720.333.1901. Or they can email [EMAIL PROTECTED] Auction we use is at end of month. If interested, please call right away. As always, contact them not me. The vehicle sounds like a great deal for any interested party. Cheers. -- Bill Yohman - SDML Admin Team Member 86 GLHS 201 - 2000 Intrepid 2004 Ram Quad Cab (Yeah, it's got a Hemi!) ICQ #6810106 AIM: shelbyregistry YAHOO!: shelbyregistry http://www.SDML.org/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 55,000 mile 87 Shelby Lancer
Excellent condition 1987 Shelby Lancer. 55k miles, 5 speed, cloth, mint interior. Outside is a 9.5/10. Has all center caps and wheels are nice. Almost all original. Missing DEX stereo (has a JCV unit). Just replaced the A/C compressor and lines, now blows ice cold, and replace alternator. Fairly new tires, and can be driven anywhere. This car is way too nice for a daily driver, and that's why I only drove it about 200 miles in the year I have owned it. I would like to see this go to a true Shelby lover. $6500 OBO Email for pictures. Thanks, Cindy ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: GLH GFX, 6.5" Crabs, 15" Pumpers, '86 GLHS Wheels, Transmissions and more
Hi all, I have some items that are looking for a new home. Everything is located in Enfield, CT. and shipping is not included unless stated. I'll start with the small stuff first and then the transmissions. 2 sets of GLH Turbo ground effects. Both have the side skirt brackets and are in good condition but one has two small scuff holes in the front facia. $100.00 for one set and $75.00 for the other. 15x6.5 Crab wheels. One pair just wheels the other has a set of fair tires, 222/50/15, $25.00 for the wheels and $50.00 for the wheels and tires. Some center caps missing and some staines and such. 15" silver pumpers with a set of 195/60/15 Cooper cobras. one pair has 70% tread left and the other about 45%. Came off my Son's Shadow and are a nice set of wheels. $100.00 1986 GLHS wheels. I have a set of 4 wheels, fair finish condition but great to refinish. $550.00. I also have three single wheels in the same condition, $140.00 ea. Yes, these are the correct '86 wheels that are marked "Shelby" ''88 TII Turbo. Little shaft play but no signs of oil or smoke, $50.00 '88 TII G body SMEC number 5233246. Removed from a working car. $35.00 '87 TII Short block $100.00 1991 R/T 568, large spline input shaft, 3.85 FD ratio. Brand new Chrysler 1st thru 5th gears, yes you have read correctly, brand new NS1 1st thru 5th speed gears. New 5th gear syncro assembly. I have selected the nicest 1/2 and 3/4 syncro assemblies I could find and assembled this transmission using a good used input shaft and intermediate shaft along with a good 5th gear used on the input shaft. Also included is a Future Auto Block & clutch posi unit and a drain plug is installed. The only way to find a nicer transmission would be to find a brand new one. $1500.00 413 Automatic transmission. This time I offering an automatic transmission for those that have asked in the past. 5 clutch front, 4 clutch rear clutch packs, 3.4 KD lever ratio, 3.02 overall gear ratio, this is the stock turbo car transmission ratio for automatics. This transmission also contains a Turbo Action RMVB, case is drilled for external line pressure adjustment. Also included in this transmission a Block style posi unit. This is one made by Pat at Future Auto and had HD springs and tested at 80 lbs breakaway on the bench, these are no Quaife or OBX but better than nothing. HD Torque convertor that's good to 350 HP. Transmission and convertor will ship separately $1400.00 520/555 Race/Street transmission. 555 1st thru 5th gears & input shaft. 3.50 FD intermediate shaft and ring gear from a 520 with a stock differential and diff pin retainers. This race proved street crash box has had modifications to the gears and brass rings. Every other tooth was removed from the 1st thru 4th speed gears and the brass rings to allow full throttle, to the floor power shifting. This transmission setup was race proven with over 100 passes in a 12 sec. Shadow. If your looking for something that shifts like no other here, is your transmission. You can have it with a welded diff for no extra charge for your race only application or add the OBX or keep a stock open diff for a street strip car. $1000.00 523/568. '91 Large spline gears set, 3.50 FD ratio. Stock open diff but can be upgraded to a Quaife or OBX. Rebuilt with new bearings, seals, shift fork pads and brass as needed. $900.00 Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) www.Mopartek.com ** Check out free AOL at http://free.aol.com/thenewaol/index.adp. Most comprehensive set of free safety and security tools, millions of free high-quality videos from across the web, free AOL Mail and much more. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: Tires and Wheels
By the way, these are 5 lug wheels. Mike Fisher wrote: I have an almost brand new set of BFG G-Force 205/50/15 Drag radials on a set of pizza wheels if anyone is interested. The tires have about 6 passes on them, but they never actually did a burn out, or have really been spun for that matter. They still have the little molding tits on them... Anyway, if someone is interested, let me know. I have started racing a 5.0 Stang instead, so I really don't need them anymore. I can sell just the tires or just the wheels. Either way is fine. Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Tires and Wheels
I have an almost brand new set of BFG G-Force 205/50/15 Drag radials on a set of pizza wheels if anyone is interested. The tires have about 6 passes on them, but they never actually did a burn out, or have really been spun for that matter. They still have the little molding tits on them... Anyway, if someone is interested, let me know. I have started racing a 5.0 Stang instead, so I really don't need them anymore. I can sell just the tires or just the wheels. Either way is fine. Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Hybrid transmissions, Automatic transmission and R/T 568 with NEW gears
Hi all, Well it's the beginning of a new year. People are getting parts collected for their big project and I have put together a collection of transmission choices for your project. I'm offering a free shipping container and packaging material with each transmission purchased. None of the transmissions are assembled so you can select the options you want like moly plate, OBX and drain plug (Except the '91 R/T with new gears which only comes one way) . The OBX in NOT available on the 525/555 transmission. Moly Plate for the 525/555, 520/555 is an additional $100.00 Drain plug is an additional $25.00 OBX Differential with new internal washers, disassembled and all holes tapped and case clearanced for proper axle fit $550.00 NOTE: This is for the 520/555 and 523/568 transmissions ONLY. Will NOT fit the 525/555 transmission. The reason for the added cost on the OBX is that all but one we have had here came with broken belville washers inside, fasteners not torqued right, bolt holes not tapped right and axle shafts that wouldn't fit into the unit, we fix all these issues. First transmission offered is one you will never find again. This transmission is a collection of NOS parts that I collected over the years at the dealership along with items I have collected building transmission in my shop. 1991 R/T 568, large spline input shaft, 3.85 FD ratio. Brand new Chrysler 1st thru 5th gears, yes you have read correctly, brand new NS1 1st thru 5th speed gears. New 5th gear syncro assembly. I have selected the nicest 1/2 and 3/4 syncro assemblies I could find and assembled this transmission using a good used input shaft and intermediate shaft along with a good 5th gear used on the input shaft. Also included is a Future Auto Block & clutch posi unit and a drain plug is installed. The only way to find a nicer transmission would be to find a brand new one. $1500.00 413 Automatic transmission. This time I offering an automatic transmission for those that have asked in the past. 5 clutch front, 4 clutch rear clutch packs, 3.4 KD lever ratio, 3.02 overall gear ratio, this is the stock turbo car transmission ratio for automatics. This transmission also contains a Turbo Action RMVB, case is drilled for external line pressure adjustment. Also included in this transmission a Block style posi unit. This is one made by Pat at Future Auto and had HD springs and tested at 80 lbs breakaway on the bench, these are no Quaife or OBX but better than nothing. HD Torque convertor that's good to 350 HP. Transmission and convertor will ship separately $1400.00 525/555 transmission. This is the combination that started my hybrid adventure. I built my first one 12 years ago for a friend with an '86 GLHS that wanted the strength and better ratios of the 555 along with the 3.56 FD ratio of the stock 525 and a transmission that wouldn't require cutting of his very nice GLHS, a bolt in custom transmission shall we say. We added his Shelby Cam & Pawl posi unit and a Lambros moly plate and this transmission still runs today in his car. 525/555 transmission. 555 1st thru 5th gears & input shaft. 3.56 FD intermediate shaft and ring gear from the 525 and stock 525 differential. Rebuilt with new bearings, seals, shift fork pads and brass as needed. Upgraded 1/2 shift fork to the HD piece from the 555 along with an '87 525 case that uses the stronger differential bearing retainer bolts on the left side. $750.00 520/555 Race/Street transmission. 555 1st thru 5th gears & input shaft. 3.50 FD intermediate shaft and ring gear from a 520 with a stock differential and diff pin retainers. This race proved street crash box has had modifications to the gears and brass rings. Every other tooth was removed from the 1st thru 4th speed gears and the brass rings to allow full throttle, to the floor power shifting. This transmission setup was race proven with over 100 passes in a 12 sec. Shadow. If your looking for something that shifts like no other here, is your transmission. You can have it with a welded diff for no extra charge for your race only application or add the OBX or keep a stock open diff for a street strip car. $1000.00 R/T 523/568 This is a new combination I came up with to offer the R/T owners the choice of having a Quaife unit without the Quaife price. 1991 R/T transmission with a 3.77 FD intermediate shaft and ring gear from a 523. A good choice to keep close to the stock 3:85 FD ratio and allows you to install an OBX LSD unit. Rebuilt with new bearings, seals, shift fork pads and brass as needed. $900.00 Shipping is by way of Fedex and calculated by your ZIP code to a work address so please include that when inquiring. Thanks, Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.htm
SD> FS: Parts On Ebay
I have a few parts on ebay and will be listing more in the near future: http://motors.search.ebay.com/_W0QQsassZturboshelbysandfbodies Mario Di Cesare 1985 Dodge Omni GLH Turbo 1985 Dodge Shelby Charger _ ___ Get your own web address. Have a HUGE year through Yahoo! Small Business. http://smallbusiness.yahoo.com/domains/?p=BESTDEAL ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: '82 Rampage AM-FM Stereo Radio
Factory radio from my '82 Rampage Sport. No tape, only radio, good condition.
Worked good including the stereo indicator when I removed it a week ago.
Factory plugs intact.
As is, $35 obo, plus shipping. I thought someone was looking for one awhile
back.
--
Rex N. Elsner
Corbett, Oregon
'86 Shelby Charger ('Ole Blew)
'87 Shelby GLHS#0122 ('Ole Shel)
'84 Rampage 2.2 (5 speed, Shelby Charger nose)
'82 Rampage (2.2/4sp roughy)
'82 Rampage Sport ('Ole Red, DD, 2.2/auto)
'82 Rampage (2.2 / 4 speed)
Co-Founder PNW-SDAC
http://www.pnw-sdac.org
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Turbo header, GLH GFX, TIII stuff, 6.5" crabs & More
Hi all, Have a few TD items on ebay here _http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek_ (http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek) Thanks, Cliff Ramsdell ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Shop Heater
Hi all, I picked this up but won't be using it. It's brand new but has some cosmetic shipping damage. It's from Grainger and it's a Dayton electric heater. You can see more here for exact specs on the unit, _http://www.grainger.com/Grainger/wwg/itemDetailsRender.shtml?ItemId=1613601727_ (http://www.grainger.com/Grainger/wwg/itemDetailsRender.shtml?ItemId=1613601727) Weight and size will ship Fedex no problem. I'm asking $100.00 for it and shipping depends on ZIP code, US 48 state shipping only. Thanks, Cliff Ramsdell ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS
FS> Stock Rear window Louvers for 87-91 Daytona. Louvers are in very good condition with the exception that the Black paint is faded and the aluminum is showing through. Sorry I do not have the attaching hardware. Best Offer. email [EMAIL PROTECTED] FREE for 30 Days! - Holiday eCards from AmericanGreetings.com http://track.juno.com/s/lc?s=197335&u=http://www.americangreetings.com/index. pd?c=uol5637 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS - 1990 FWD service manuals - Like new with extras - $35 shipped
This is a set of 5 books. 1. Engine, Chassis, Body 2. Wiring Diagrams 3. Electrical, Fuel, and Emissions 4. Wiring Diagrams - service manual supplement 5. Powertrain Diagnostic Procedures I prefer paypal, but will take a money order. [EMAIL PROTECTED] Howard ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS - 1988 CSX-T 1,894 Origonal Miles
I was contacted by the owner and they wanted to see if I would be so kind to add it to my site. I thought that I would do so, and see if anyone is interested. So, I did. I also told him that I would let everyone know on the mailing list that it is for sale. :-) Robert Meier wrote: I think this car was on Ebay about 5 weeks ago, didn't meet the reserve if I remember correctly - Original Message - From: "Brian R. Downard Sr." <[EMAIL PROTECTED]> To: Sent: Monday, November 27, 2006 2:19 PM Subject: SD> FS - 1988 CSX-T 1,894 Origonal Miles Here is the information and the pictures that someone got in touch with me about. Take a look at it. http://soulserpentmedia.com/DodgeShelby/ShelbyDodge001Sale.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS - 1988 CSX-T 1,894 Origonal Miles
I think this car was on Ebay about 5 weeks ago, didn't meet the reserve if I remember correctly - Original Message - From: "Brian R. Downard Sr." <[EMAIL PROTECTED]> To: Sent: Monday, November 27, 2006 2:19 PM Subject: SD> FS - 1988 CSX-T 1,894 Origonal Miles Here is the information and the pictures that someone got in touch with me about. Take a look at it. http://soulserpentmedia.com/DodgeShelby/ShelbyDodge001Sale.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS - 1988 CSX-T 1,894 Origonal Miles
Here is the information and the pictures that someone got in touch with me about. Take a look at it. http://soulserpentmedia.com/DodgeShelby/ShelbyDodge001Sale.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS GLHT body parts
I have two nice GLHT hoods and several fenders. A right rear door and I also have an NOS left inner fender (the metal part) and an NOS front core support. I want to sell all of these parts. Delivery may be possible too. I am willing to ship things and also will be driving from NC to Orlando and back in about a week. And will probably drive from NC to NY in December. In the spring I will drive from NY to Alaska. Prices depend on whether I have to pack anything and how much you buy. Let me know if you are interested and we can try and work out a deal. Richard Paul ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 87 Shelby-Z t-top
Selling my 87 Shelby-Z in a couple weeks. Car is red with t-tops and rear louvers, with nice grey leather. Enthusiast seats, and all other power options working well. Just got short block out of the shop after a complete rebuild to stock specs. A-555 has been rebuilt recently with a HD clutch. Stock T-II turbo has also been recently rebuilt. The only upgrades to this car is a ported and polished head, intake manifold, and exhaust manifold. And the intake manifold has been port matched for a 52mm TB. This car will pretty much have everything new. Head gasket, timing belt, fuel pump, etc. This will be a nice turn key Shelby-Z that you can drive anywhere. The only problem with this car is the clear coat needs some attention. Other than that, there is zero rust, and zero body damage. The front airdamn has a small crack though. Odometer reads 177,xxx. I am looking for $2300, or a trade for another TD. Car is located in Salt Lake. ~Tyler Larsen~Salt Lake City, Utah~ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS - Suspension, SMECS, Wheels, Misc
Need to make room/raise money. Shipping not included. Can also deliver to Cecil County Dragway on 11/11. Eibach Springs - very low mileage, great shape - $160 MP Struts - about 10-15k miles, great shape, don't need them - $40 KYB Gas Adjust Shocks - less than 1k miles - $30 Cast Control Arms from '91 R/T - $50 Used Monroe Formula GP Struts - unsure of mileage, decent shape - $60 MP Strut Rod bushings - $15 6.5" crab wheels - outstanding shape, centers painted charcoal, decent 225/50/15 tires on them - $150 6.5" crab wheels - no tires, good shape - $80 3 pizza wheels, matte finish, not a scratch on them, have tires - $50 for all 1 pc intake and rail - $40 valve covers - I have a bunch if anyone needs one - $10 MP bobble strut - modified Neon unit, works perfect on older TD's. Stiffer than stock, but much more user friendly than solid - $35 '88 T-1 SMEC - $60 '88 T-II SMEC - $75 Custom SMEC 3 bar/+40 cal done by TU (Paul Vellicky) - cal set up for 2.2/G head, switchable boost 14psi/18 psi but I tended to run a G valve anyway. Ran well in my old car. I ran 13.5's with it in a full weight Spirit ES at 18 psi on pump gas. - $180 T- II air box - $40 Radiator/intercooler out of an '87 Shelby Z, came from running car, seems to be in pretty good shape - $150 The parts listed below are pick up only in Rockville, MD or at Cecil: chin spoiler from '87 Shelby Z. Blue, not perfect but useable. $20 M&H 23x7x15 slicks mounted/balanced on pizza wheels. Used, but a ton of life left in them. These slicks hook hard..have cut 1.7's in full weight Spirit R/T. $200 Complete '87 Shelby Z 4 wheel disk brake system. Have everything, including master cylinder and proportioning valve - $100 Pat Rockville, MD 04 SRT4 91 Spirit RT 88 Shadow ES 16v ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: CSX-VNT Computer, L body Manual rack, GLHS Rad/cooler/fan assembly
Hi all, Got these items listed on ebay right now for those of you who might be needing such items. You can find them here _http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek_ (http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek) Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) www.Mopartek.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS 1987 Daytona Shelby Z
Hello, I've listed this car a few times already, but I thought I'd give it one more shot before the winter and lower the price by a good bit. I did a lot of work on this car while I was in high school, but I had no place to work on it during college, and I have no place (or time) to work on it now that I am out of college. The car runs, but could use a little tuning (the timing is slightly off I believe). The car is located in Traverse City, Michigan at my fathers house (we will be more than willing to work out shipping with anyone who is interested). Here are some of the parts I have put on: rebuilt motor new turbo Forward Motion turbo header (with SS braided oil lines) Forward Motion 3" SS mandrel bent exhaust ported and polished cylinder head super 60 camshaft 44mm intake/36.8mm exhaust valves Koni adjusable shocks and struts eibach springs pirelli p7000 tires on American Racing rims All of these parts have VERY few miles (under 50). The motor blew so I had a rebuilt motor and turbo put on, and after I got the motor and turbo broken in a little I garaged the car and started building it up. Unfortunately the project took me longer than expected and I never got a chance to drive it much before I left for college. The body is in good shape. It looks very nice, but there is some rust on the underside of the car. It has been in a garage since 1999. I really want to sell this car to someone on this group because I hate the idea of someone getting this car that doesn't appreciate it like it should be. I am asking only $2000 for this car, and would like to sell it before it starts snowing. Email me at [EMAIL PROTECTED] if you would like to see some pictures. If you want to see the car, I can work something out with my father and set up a time (I am working in NYC so I can't really make it back to MI to work everything out). -Steve Szymanski ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 87 T2 parts
Okay guys, buyer backed out, so I'm reposting this, and listing a few more items. Email me w/ offers. I'm willing to trade (specifically looking for a good set of Shelby Lancer wheels). 2 piece intake manifold, complete: $220T2 exhaust manifold: $15T2 Intercooler: $125Stock '87 Daytona Logic Modual/Body Computer: $75 for bothUnder hood wiring harness for '87 Daytona Shelby Z: $30Lower IC hose '87 Daytona Shelby: $50'88 1 piece intake, missing TB: $50 Shipping is from 80120. Will send pics if needed. Thanks! . . .shawn ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1985 Bosch Fuel Pressure regulator
For sale: Brand new factory Bosch fuel pressure regulator for 1985 T-l engine. Made in Germany. High quality purchased from a Chrysler dealer for $50. Never used. Offering it for sale here before eBay listing next week. $40 shipped to the 48 states. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Minivan Parts
Hi, I sold my turbo minivan, and am cleaning out my extra parts. I have a gauge cluster with a tach and all gauges instead of idiot lights $35 +shipping Brand new in the box struts and shocks $50 +shipping Parts in Manheim PA 17545 Thanks for looking, Nick _ Be seen and heard with Windows Live Messenger and Microsoft LifeCams http://clk.atdmt.com/MSN/go/msnnkwme002001msn/direct/01/?href=http://www.microsoft.com/hardware/digitalcommunication/default.mspx?locale=en-us&source=hmtagline ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS 1991 White Spirit R/T in Ontario - last call
This is the last time I'm offering my 1991 spirit R/T for sale. It must go by the end of this month or it will go to storage(I would rather not pay for more storage) the car is in very good condition and everything works (even the air condition) the car is located in Cambridge, Ontario. best offer nearest to $4500 will take it. you can leave a message at 1-519-623-0471 thanks Albert Pinheiro ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1987 Daytona Shelby Z
This was my project car during high school, and has been sitting in a garage for the past 6 years while I was attending college. I was originally planning to keep this car, but I have no place to work on it anymore. Here are some of the parts this car has on it: rebuilt motor new turbo Forward Motion turbo header (with SS braided oil lines) Forward Motion 3" SS mandrel bent exhaust ported and polished cylinder head super 60 camshaft 44mm intake/36.8mm exhaust valves Koni adjusable shocks and struts eibach springs pirelli p7000 tires on American Racing rims All of these parts have VERY few miles on them (under 50 miles). The body is in decent shape, however there is rust on the underside of the car. There are more performace parts that are incuded, but the ones listed are the most important in my opinion. I don't want to part this car out, so I'm hoping to sell it as a whole. The car has some tuning issues that I was not able to work out while I was working on the car. Last time I was home I jumped the battery and it started fine. I think that with a little tuning this car could run fine as-is, and it would also be good just for the performance parts. I have a few pictures of the car, and if anyone wants to see them, send an email to me at [EMAIL PROTECTED] If there is anything in particular that you want to see a picture of, please let me know and I'll get the pics. I would like to get $2900 for the car, but I will consider all offers. I put about $15,000 into the car all together, and a lot of the parts that I bought are still brand new. The car is located in Traverse City, Michigan, at my fathers house. I am living in New York right now, but I can make arrangements with my father to let anyone in to see the car. I will work with anyone that is interested to arrange shipping if that is what you want to do. Feel free to email me with questions, and I can email you a more detailed description of the car and the parts that are included, as well as any pics you might like to see. -Steve Szymanski ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1989 Shelby Dakota
I am selling my 1989 Shelby Dakota it is not in running condition, so it will have to be picked up from Maple Grove, MN. I have removed the engine and I completely tore it down in anticipation for a rebuild, but never got around to it. The chassis is complete or at least as complete as it was when I bought it will need to be a project vehicle, or a parts chassis as the paint has been peeling away. The truck has sat in the garage for 3+ years so most of the metal is in decent condition. Call me or email me for more specific details of the engine and truck as there is more to tell than I can put in an email. Price is open to negotiation. I would like to sell it all together or at least get rid of the whole chassis. For further details call 763-350-4791, or email me at [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: 1984 FWD Chrysler Service Manual
Does it cover or mention Rampages? I'm interested. - Original Message - From: "Mark Panos" <[EMAIL PROTECTED]> To: Sent: Friday, September 01, 2006 8:02 PM Subject: SD> FS: 1984 FWD Chrysler Service Manual I have the 1984 Chrysler Service Manual for the FWD cars, including the Shelby Chargers and the GLH Omnis. Good condition, make me an offer if interested. Thanks, Mark ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1987 FWD Chrysler Service Manual
I have the 1987 Chrysler Service Manual for the FWD cars Good condition, make me an offer if interested. Thanks, Mark ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1984 FWD Chrysler Service Manual
I have the 1984 Chrysler Service Manual for the FWD cars, including the Shelby Chargers and the GLH Omnis. Good condition, make me an offer if interested. Thanks, Mark ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Spirit R/T registry and web site
Hi all, Well, in my cleanup of my house and contents one item that I have and would like to go to a new home is the Spirit R/T registry and web site. OK, here's the deal. I have the VIN numbers for 993 of the 1991 R/T's and 124 of the 1992 R/T's, only the Spirit's, no IROC's. There are a few Vin's of the Mexican Spirit R/T's both twin can and single cam cars also. I have function 70's for all the VIN numbers and a file card for each and the material takes up about a draw and one half of a file cabinet. If someone really want's all this stuff please contact me and we can discuss the details and come to a deal on the price. I have some cash involved here along with 100's of hours invested and don't want to see it all go to waste and get tossed into a dumpster so if you love Spirit R/T's and want all this stuff please contact me. There will not be another email about this and the next time you read about it either someone else will own it or it will be gone for ever. Thanks, Cliff Ramsdell '86 GLHS 210 Shelby Posi and Shelby Roll Cage '29 Model A, 239 flathead V-8, 3 speed [EMAIL PROTECTED] http://www.members.aol.com/mopartek/home.html "Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...Holy $hit!! What a Ride!!" ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: Fiberide Bookends
In a message dated 8/29/2006 3:45:34 P.M. Pacific Standard Time, [EMAIL PROTECTED] writes: I'm curious if powder coating will work on those wheels? Powder coat will stick to anything that holds a static charge. And of course the wheel would need to handle 400 to 500 degrees F. Any thoughts? Its a composite, no powder coating.. Think of it as more of a fiberglass.. Chris Pauluk - Modesto CA. - 1984 Rampage "Ramlet" \\ FOR SALE // _www.cardomain.com/id/solo2rampage_ (http://www.cardomain.com/id/solo2rampage) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: Fiberide Bookends
I'm curious if powder coating will work on those wheels? Powder coat will stick to anything that holds a static charge. And of course the wheel would need to handle 400 to 500 degrees F. Any thoughts? Ean www.thebluebaron.homestead.com '87 Chrysler LeBaron coupe (The Blue Baron) '89 Chrysler LeBaron coupe (Christine) '02 Chrysler Neon LX (Lex) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Fiberide Bookends
Have you ever seen a picture of the bookends Carrol Shelby has in his office that are made from a section cut from a Fiberide wheel? Here is your chance to make some for YOUR office. I have four Fiberides with various damage that keeps them from being used on the road. But, they all have a good section that will make a neat bookend. Just use a bandsaw to cut the pie section out, mount it on a nicely stained wood bookend, and you have a very unique bookend that will be the envy of all your Shelby Dodge friends! If interested, make me an offer. Mark ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 89 CSX Grill
I have an 89 CSX grill only for sale. It has a small crack in it, easily repaired. $50 plus shipping. Thanks, Mark 801-255-3306 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: VNT Turbo Core
I have a VNT turbo removed from an 89 CSX for sale. $75 plus shipping. Thanks, Mark 801-255-3306 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: 87' Daytona Shelby Z Engine Parts
I got ahold of my provider and the site works now! Remember, all prices are negotiable! . . .shawn --- eric <[EMAIL PROTECTED]> wrote: > that link doesnt work :( > > eric > > --- Shawn <[EMAIL PROTECTED]> wrote: > > > Hey guys, > > > > I'm cleaning out my garage trying to make room > (and > > cash) for my Shelby Lancer project. Please check > out > > the stuff for sale: > > http://trappd.com/t2_stuff.html > > You can email me with any questions. Shipping zip > is > > 80120. If you see engine stuff that you need, > that's > > not shown, let me know. I have a whole second > engine > > that I'm tearing down and will have a ton of extra > > crap. > > > > thanks. . .shawn > > Tired of spam? Yahoo! Mail has the best spam > > protection around > > http://mail.yahoo.com > > > > > ---REMOVE-FOOTER-WHEN-REPLYING > > Questions? Visit http://www.sdml.org/ > > > > To be removed, visit > > http://www.sdml.org/pages/leave.html > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 87' Daytona Shelby Z Engine Parts
Hey guys, I'm cleaning out my garage trying to make room (and cash) for my Shelby Lancer project. Please check out the stuff for sale: http://trappd.com/t2_stuff.html You can email me with any questions. Shipping zip is 80120. If you see engine stuff that you need, that's not shown, let me know. I have a whole second engine that I'm tearing down and will have a ton of extra crap. thanks. . .shawn Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: NEW PRICE 91 Dodge Daytona Shelby $700 OBO
Okay, I want this thing gone. I have priced it to sell at $700 OBO. This is a good daily driver that with a new clutch disc will serve you well. I just don't have the time anymore. Mike _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Sunday, August 20, 2006 9:38 PM To: '[EMAIL PROTECTED]' Subject: FS: 91 Dodge Daytona Shelby $1,150 OBO I have a 91 Daytona Shelby for sale in the DC / Frederick, MD area. It has over 130,000 miles on it. I did a limited rebuild on it around 100,000 miles. The biggest issue at this point is the clutch is gone. I drove it daily until I wasn't able to get the car to move reliably. This car has all available options including: White car with black leather interior, PW, PL, PS, PB, Tilt, A/C, Fog lights, Sunroof, Rear Louvers, Infinity Stereo w/ (factory) CD, 4 wheel disk brakes, 5 speed (568). All of the options are still working except for the stereo. I removed the head unit and replaced it with an infinity system. The stereo/ speakers/ amplifier/ wiring are not part of the sale at the $1,150 price. I will be removing those items and giving the speakers and head unit (in a box) to the person who is buying the car. I did not butcher the car putting the stereo in. All of the factory wiring remains with no (I think, been awhile) as I purchased a wiring harness connector. This car came with all of the goodies that people want to place on other cars: large dia sway bar, big vented brakes all around, 568, etc. I did considerable work on the car including: New Autozone quality fuel pump; Replaced the fuel tank with a new one and coated the inside with the POR15 tank sealer. New rear brakes (new parking brake shoes, new pads, new rotors, new bearings) New rear shocks New 2.5" exhaust (professionally welded and installed - still rattled at times) New Catco 2.5" catalytic converter New Dynomax muffler New Front Rotors New Front Pads New Tie-rod Ends New Poly Sway bar Bushings New Engine Mounts Engine Rebuilt (bored, honed, valve job - new guides) New pistons, rings, bearings, seals & gaskets New oil pump, etc New clutch and pressure plate (FWD McLeod units) SS water and oil lines All new ignition, and sensors New factory fuel pressure regulator Rebuilt TII turbo w/ 2.5" waste gate New hoses Newer radiator New condenser AC converted to 134a New Mopar Compressor Bad Rusty - was a MN car for most of its life Clutch is gone ( I wasn't abusing it) Blue smoke from exhaust when idling on an incline I have lots of pictures if you are serious about purchasing the car. Im leaving out some things that I have done to improve the car. Parting out the options on this car alone would be more than the asking price. Regards, Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS Here are parts I have for sale just clean up some extra parts
Here is a list of parts that I have for sale. I thought I would post them here before they go to e-bay. If you do like a price then make a offer. Prices do not included shipping. 1. A 85 SC rebuild turbo head no cam,lifter or sliders never been installed. I would like to get $120.00 plus shipping AKA bath tub head 2. A freshly rebuild head 782. Looks like they put it on and could not get the car running. It is just the head no cam or lifters. Bought at the junkyard. Like to 100.00 for it. 3. Intercooler from a 88 Daytona with brackets. Looks to be in good shape. The only thing is the paint is peeling off. Like to get $65.00 for it. 4. Turbo 2 valve cover. It is black the paint is coming off. One piece gasket. Like to get $15.00 for it. 5. Use turbo 1 from a 85 SC probably good for a core $30.00 6. Shelby valve cover is good shape. With no cracks. The paint was stripped off. From a 87 CSX so three piece gasket. Like to get $200.00 for it. 7. Non AC bracket Good shape $15.00 8. Csx kick panel emblems good shape $45 Thanks Steve B [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 89 Shelby Daytona (South Carolina)
http://boostedmopar.com/forums/showthread.php?p=38686#post38686 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 91 Shadow ES Convert. T1 5speed - intercooled! Ninjas! bad tranny - $500
Update: I lent the car to my brother in law and before he even got it out of the driveway he had damaged the transmission reverse gear. It makes a very bad noise while going in reverse. Going forward it sounds OK but something is damaged in the transmission so I wouldn't drive it for any distance. $500 I'm selling my white 91 Shadow Convert T1 5sp. White. Overall it's in fair/good condition. I drive it several times a week. Here's what I've done to it: - AM/FM/CD - 89 Shadow ES high back buckets installed. Driver's side is power. - White Ninja wheels with 2 new tires. - 4 spoke leather airbag wheel from Daytona installed. - Intercooled with new R/T radiator and intercooler. I used a Shadow VNT lower metal intercooler hose and the stock airbox with K&N filter. Looks stock! Ready to install Gus valve! - Clutch installed about a 3 years ago. Clutchnet pressure plate and R/T disk. - No rust. - Includes the original 15" pumper wheels & tires. - Doesn't leak or burn oil, runs and shifts great! - I put Taylor wires and a good rotor & cap on it/. - I've run Mobil 1 or other synthetic oil w/a Mobil 1 filter since I've had it. I think I bought it when it was around 120K miles. - Just replaced the head gasket. No problems with the head or pistons. When I did the clutch job I replaced the front bearing retainer b/c the other one was grooved. I wanted a nice smooth clutch. I also had the flywheel ground then and replaced thepan seal and rear main seal. ~170K miles. Problems: - Top will need to be replaced - AC has been converte to 134a but it has a slow leak. So, it's currently not charged. - Paint on rear deck and rear bumber is peeling. The rest of the car is fine. - Rear bumber is cracked - Right side power window doesn't work. - Odometer just stopped about 2 months ago on 168K. Speedometer still works. Pics available upon request. It's in Mebane, NC. Central NC 27302. Thanks, Ed Mazurek 336-792-4629 (Home) 919-392-6936 (Work) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 91 Dodge Daytona Shelby $1,150 OBO
I have a 91 Daytona Shelby for sale in the DC / Frederick, MD area. It has over 130,000 miles on it. I did a limited rebuild on it around 100,000 miles. The biggest issue at this point is the clutch is gone. I drove it daily until I wasn't able to get the car to move reliably. This car has all available options including: White car with black leather interior, PW, PL, PS, PB, Tilt, A/C, Fog lights, Sunroof, Rear Louvers, Infinity Stereo w/ (factory) CD, 4 wheel disk brakes, 5 speed (568). All of the options are still working except for the stereo. I removed the head unit and replaced it with an infinity system. The stereo/ speakers/ amplifier/ wiring are not part of the sale at the $1,150 price. I will be removing those items and giving the speakers and head unit (in a box) to the person who is buying the car. I did not butcher the car putting the stereo in. All of the factory wiring remains with no (I think, been awhile) as I purchased a wiring harness connector. This car came with all of the goodies that people want to place on other cars: large dia sway bar, big vented brakes all around, 568, etc. I did considerable work on the car including: New Autozone quality fuel pump; Replaced the fuel tank with a new one and coated the inside with the POR15 tank sealer. New rear brakes (new parking brake shoes, new pads, new rotors, new bearings) New rear shocks New 2.5" exhaust (professionally welded and installed - still rattled at times) New Catco 2.5" catalytic converter New Dynomax muffler New Front Rotors New Front Pads New Tie-rod Ends New Poly Sway bar Bushings New Engine Mounts Engine Rebuilt (bored, honed, valve job - new guides) New pistons, rings, bearings, seals & gaskets New oil pump, etc New clutch and pressure plate (FWD McLeod units) SS water and oil lines All new ignition, and sensors New factory fuel pressure regulator Rebuilt TII turbo w/ 2.5" waste gate New hoses Newer radiator New condenser AC converted to 134a New Mopar Compressor Bad Rusty - was a MN car for most of its life Clutch is gone ( I wasn't abusing it) Blue smoke from exhaust when idling on an incline I have lots of pictures if you are serious about purchasing the car. Im leaving out some things that I have done to improve the car. Parting out the options on this car alone would be more than the asking price. Regards, Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1985 turbo
Used turbocharger from 1985 Omni GLHT. Worked fine when taken off car. Garrett T-l located in Connecticut. $75 shipped to the 48 United States. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 91 R/T in NE Indiana
Red, completely stock & unmodified, 113k miles, no rust, interior in very good condition, exterior is good but has some clear coat pealing & paint fade, looks like it is still the original paint. Drives straight and smooth, brand new brakes all around. A/C does not work, PS pump has a leak but can be driven, airbag light goes off and on, possible issue with the fan not coming on but it runs when relay contacts are jumpered. Looking to get $2k for it. Many pics available on request. - Get your email and more, right on the new Yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 89 Shelby Daytona, New Engine, Automatic in New Jersey
Hey, I'm new here and would like to sell my car. I have it posted on Craigslist at: http://newjersey.craigslist.org/car/186438865.html If anyone has any questions, offers, or wants to see higher res images please mail me - [EMAIL PROTECTED] I hope someone's interested, I'm located in Morris County, New Jersey. -Tim Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1984 Shelby Charger MUST GO
The car has got to go now. Its taking up space and I don't have the time to invest in the car. Make me an offer NO REASONABLE OFFER REFUSED. Some one please save this car from the junk yard. 1984 Shelby Dodge 70208 miles Automatic Blue with silver Located in Hillsborough NJ Pictures Available Buyer will be responsible for retrieving the car. Contact me at [EMAIL PROTECTED] -- Jeff Lawson ~~ www.CobaltSS.Net ~~ Aim RedCavyRS99 MSN [EMAIL PROTECTED] Y! lawson_08505 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1984 Shelby Charger
$800 OBO 1984 Shelby Dodge 70208 miles Automatic Blue with silver Pictures Available Please send all emails to [EMAIL PROTECTED] -- Jeff Lawson ~~ www.CobaltSS.Net ~~ Aim RedCavyRS99 MSN [EMAIL PROTECTED] Y! lawson_08505 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1987 Daytona Shelby Z
This was my project car during high school, and has been sitting in a garage for the past 6 years while I was attending college. I was originally planning to keep this car, but I have no place to work on it anymore. Here are some of the parts this car has on it: rebuilt motor new turbo Forward Motion turbo header (with SS braided oil lines) Forward Motion 3" SS mandrel bent exhaust ported and polished cylinder head super 60 camshaft 44mm intake/36.8mm exhaust valves Koni adjusable shocks and struts eibach springs pirelli p7000 tires on American Racing rims All of these parts have VERY few miles on them (under 50 miles). The body is in decent shape, however there is rust on the underside of the car. There are more performace parts that are incuded, but the ones listed are the most important in my opinion. I don't want to part this car out, so I'm hoping to sell it as a whole. The car has some tuning issues that I was not able to work out while I was working on the car. Last time I was home I jumped the battery and it started fine. I think that with a little tuning this car could run fine as-is, and it would also be good just for the performance parts. I have a few pictures of the car, and if anyone wants to see them, send an email to me at [EMAIL PROTECTED] If there is anything in particular that you want to see a picture of, please let me know and I'll get the pics. I would like to get $3200 for the car, but I will consider all offers. I put about $15,000 into the car all together, and a lot of the parts that I bought are still brand new. The car is located in Traverse City, Michigan, at my fathers house. I am living in New York right now, but I can make arrangements with my father to let anyone in to see the car. I will work with anyone that is interested to arrange shipping if that is what you want to do. Feel free to email me with questions, and I can email you a more detailed description of the car and the parts that are included, as well as any pics you might like to see. -Steve Szymanski ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: ULTRA RARE 1990 Spirit ES Turbo 5-speed
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&item=20008575&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Slicks & Drag Radials
Hi all, In further cleaning up I have a set of slicks and drag radials left from the wagon. Shipping is from 06082 and if your interested email to [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) . Slicks, M&H Racemaster 8.5x23x15 mounted on 15" pumpers and in great shape, mounted and ready to run. These tires have about 20 to 25 passes on them. They weigh about 70 lbs for the pair to ship. $250.00 Drag radials. BFG G-force TA drag radials 205/50/15 mounted on 15" pumpers. These tires have about 100 miles of street use and no drag strip use. They weigh about 80 lbs for the pair to ship. $200.00 Cliff Ramsdell '86 GLHS 210 Shelby Roll cage and Posi unit. _http://www.members.aol.com/mopartek/home.html_ (http://www.members.aol.com/mopartek/home.html) www.Mopartek.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: ULTRA RARE 1990 Spirit ES Turbo 5-speed
>ALSO, I almost forgot, this car has a flamethrower. It >spits about a 5-6 foot flame out the exhaust at the >flip of a switch from the driver's seat. Them ricers >really stay off your back and leave you alone once >they see that! That's something you usually only see on something that's not a street rod. It would sure be an "enlightening" experience to some of the annoying tailgaters I encounter on the road :) David Salamone [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: ULTRA RARE 1990 Spirit ES Turbo 5-speed
Also, the car will be going on ebay this sunday. So shoot me an offer soon, or feel free to bid! I will post a link to the auction as soon as I list it. Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: ULTRA RARE 1990 Spirit ES Turbo 5-speed
Car is located in Joliet Illinois, 60431 I am going to list the bad first, the car needs a headliner, it will come with new fabric, just needs to be installed. The car leaks a couple drops of oil every night. It is leaking from the oil return hose on the turbo. The GOOD! The car has a new paint job (white) with a custom hood with 2 hood scoops. (looks really mean) ALso has an r/t wing and a chrome grille. The car rides on 16 inch Enkei rims with 2 new 205/55R16 on the front older ones on the back. The engine has been removed rebuilt and repainted several years ago. All seals and bearings were replaced. --- Here is a list of everything new in the past couple years: Ball joints brakes motor mounts trans mount clutch Garrett T3 Hall Effect plugs cap rotor wires KYB gas adjust shocks KYB struts Strut mounts Hubs Radiator Pioneer CD/MP3 player Sony speakers both front fenders 3 inch exhaust (not sure if it is true 3 inch all the way back, not too concerned, its not a race car) I am sure there is more, I have done alot of work to this car and it really shows. This car rides very nice and solid, the A-523 shifts smooth through att 5 gears and reverse. I think production numbers for this car was only in the 300's. And I read that less than 20 of them came with a sunroof (which this one does). I have tried too keep this car in great shape and I hate to sell it, but I just got a new job that requires me to travel, and I can not bring myself to put miles on this car like that. ALSO, I almost forgot, this car has a flamethrower. It spits about a 5-6 foot flame out the exhaust at the flip of a switch from the driver's seat. Them ricers really stay off your back and leave you alone once they see that! I am asking somewhere near $3k and it is totally worth all the work done to her. All reasonable offers considered Feel free to email me back for pictures Thanks alot! -Billy Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: 87 #488 Thinning the fleet.
In a message dated 7/6/2006 9:31:13 P.M. Pacific Standard Time, [EMAIL PROTECTED] writes: Front Air dam missing but I have one available for $? more. It doesn't have the stock one, but for a little extra you'll throw one in? h Chris Pauluk - Modesto CA. - 1984 Rampage "Ramlet" _www.cardomain.com/id/solo2rampage_ (http://www.cardomain.com/id/solo2rampage) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 87 #488 Thinning the fleet.
I'm trying to get a handle on my projects and one has to go. For Sale: 87 CSX #488. 114,000 miles. I'm putting in an 87 turbo block now because the orginal was trashed by 2nd owner (not me) Rebuilt turbo. Can't tell if it's upgraded or not. It has the aluminum adapter on the input so that's why I wonder. 2 and a half inch straight exhaust all the way. No cat. A/C removed. Mopar Performance Ported Head and MP Slider Cam. Sun Roof (not my fault either) Missing dash tag. Shelby Valve Cover M.I.A. but have nice Black Turbo ready. Engine SN Tag and Drivers door decal are there. Good Body but the trunk lid and spoiler could use paint. A few dings but it is 18 years old. GFX are weak on paint also. Some rocker panel rust on passenger side. Front Air dam missing but I have one available for $? more. Front seats have the typical splits but not that many. Headliner needs attention too. Overall, if it wasn't worth it, I would not have got it. $2000 running and ready to go. $1500 with the motor in the trunk and parts in boxes. O. B. O. Got to sell Email privately for phone number. Can haul to SDAC Topica. Rock & Roll with a Shelby or two.. or 1/3 Dozen) Steve and Dee Kalmes Springville, Iowa 89 CSX-VNT #467 (slot car) 88 CSX-T #475 (show car) 87 CSX #311 (go car) 87 CSX #488 (toy car) _http://www.hometown.aol.com/sdkalmes/shelby475.html _ http://www.440magnum-network.com/emailed/1999/oct99/1988shelbyCSXT.shtml _ http://www.shelbycsx.com/gallery.shtml _ http://www.shelbyregistry.com/pages/regd/88csxt.html _ http://www.shelbyregistry.com/pages/regd/87csx.html _ http://www.joink.com/homes/users/cooke/shelbyregistry/stevek.html _ http://www.joink.com/homes/users/cooke/shelbyregistry/rideindex.htm ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 88 Lebaron Vert in Dover, PA
Red w/white top & gray vinyl interior, located in Dover, PA 17315 It's in good shape & a pretty solid car. NO RUST. Definitely not a parts car, and I can't imagine there's many other 88's out there in better physical shape with 127,000 miles on them. Here's the GOOD: It was garage kept & only a fair weather car when I bought it in 11/02 with 76,000. So the undercarriage is clean, clean floors. It was never hit before I bought it, that I know of, nor while I owned it (since 11/02). A/C is COLD. The top is good, but too tight. I was hoping to replace it either this year or next. All windows in working order. The top motor works fine, it was taken out of a newer vert that was totaled. The interior is flawless too, with the exception of the right side of the driver's seat starting to get fold cracks, right under where your right thigh rests. Both axles are new within the past year. New 14" Dunlops in either 8/04 or 6/05, I can't remember, but can check. Here's the BAD: The headlights stopped closing some time ago. The temp gauge stopped working & I never got as far to figure out why. A lift & slip was done about 2 years ago on the head gasket & it started to leak again this year, but never more than a quart between 3,000 mile oil changes. I put a new rad in about a year & a half ago & it started leaking again, so I had to keep up on the fluid level. Was planning to replace the rad about the time she left me sit. Bernie said there's no compression at #1 & #2. He said the head should be gone over at least, just to be safe, but thought it might be less work to just exchange motors if I could get one that's pretty much ready. I did all my own oil changes, unless I had it at Bernie's for some work. He did all the work on the car that I couldn't/wouldn't, so he probably knows it better than I do. That's where the car is now, in Dover. I sure do miss driving her, there's just something about those Jbody Lebarons that's cool! But I just don't have the need for another vert. I'm sure I'll have enough headaches once the Shelby is back on the road, and I definitely need a car that's less work & is under a warranty. THAT part is nice about my new car. Would you believe I haven't bought a NEW car since 1987!?! That was the 1st time tooLOL! All used Mopars ever since.9 of them! I don't know if that's good or badLOL! Email for pics if interested, I have a ton! Asking $1000, may be negotiable. Thanx for your interest. ~~ Holly from Harrisburg, PA SDAC Member - www.sdac.org DVSDAC Member - www.dv-sdac.org GLSDAC Member - gl.sdac.org '05 Chrysler Sebring Convertible, White w/Black top, 2.4/auto '89 Daytona Shelby, Red w/Ts w/2.2 TII & A555 '88 Chrysler Lebaron Convertible, Red w/White top, 2.5/auto - FOR SALE! Ms. DC says, "Dodge Girls have more fun!" ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> fs 86 glh
Hi everyone, Going to try one more time before i go to ebay, fs 86 glht converted 2 peice intake, intercooled glhs stage 2 w/ziener diode later t2 garrett, runs really strong, needs interior work. drive away 1300.00 just dont have room any longer. davenport,ia 866-510-2345 8to5 thanks, JimShannon - Ring'em or ping'em. Make PC-to-phone calls as low as 1"/min with Yahoo! Messenger with Voice. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Chrysler Service Manuals, drivability books, wiring harnesses & More
Hi all, Cleaning out more. I have a file cabinet full of Chrysler factory service manuals and drivability books from 1984 to 1993 and the cover the turbo cars and TIII cars. Here is a partial list I'll let run for now and then onto ebay next Monday. All books and material are located in Enfield, CT. 06082. Shipping is additional and if your inquiring please include a ZIP code. Email only to [EMAIL PROTECTED] will get replies, OK? Service Manuals listed first. I'll include the condition and how many are included and all are FWD books unless otherwise stated. 1984, 2 books fair condition. Chassis/Body, Electrical & Engine Performance $25.00 1985, 4 books. Minivan (fair condition) and FWD (very good condition) Engine/Chassis/Body, Electrical/HVAC and Wiring $50.00 1986, 3 books very good condition. Engine/Chassis/Body, Electrical/HVAC and Wiring $50.00 1987, 3 books good condition. Engine/Chassis/Body, Wiring & Shadow/Sundace (early release manual) $45.00 1988, 3 books good condition. Engine/Chassis/Body, Electrical/HVAC and Wiring $45.00 1991, 3 books very good condition. Engine/Chassis/Body, Electrical/HVAC and Wiring Includes Spirit R/T TIII motor and electrical $50.00 1992, 4 books fair condition. Engine/Chassis/Body, Electrical/HVAC and Wiring Includes Spirit R/T & IROC R/T TIII motor and electrical along with Minivan $50.00 1993, 2 books fair condition. Engine/Chassis/Body, Electrical/Fuel/Emissions. Includes IROC R/T TIII motor and electrical $40.00 1991 FWD Wiring book only includes Spirit R/T wiring diagrams $25.00 Drivability books also called Powertrain Diagnostic Procedure books. Chrysler issued. 1985 2.2 Turbo $20.00 1988 2.2 TI & TII Includes charging and speed control $20.00 1989 2.5 TI includes charging and speed control $20.00 1990 2.2 TIV and 2.5 TI $25.00 1991 2.5 TI $25.00 1991 2.2 TIII $30.00 1992 2.5 TI $25.00 1992 2.2 TIII $30.00 1993 2.2 TIII $30.00 I also have a bunch of wiring harnesses left that didn't sell. If you want one get it now because they will get tossed in the can next week. Make and offer, lets deal. Wiring harnesses and parts. I found 4 big old boxes full of harnesses and parts some need work but all are complete, sold as is. '86/'87 Shelby Charger underhood harness for TI motor. This is just the main harness with no sub harnesses, I have 2 of them $50.00 ea. '88 Turbo negative wiring harness G/J/H body TI & TII cars Nice $20.00 '89 Turbo negative wiring harness G/J/H body TI & TII cars Nice $20.00 '90 Turbo negative wiring harness G/J/maybe P body I have 2. One nice the other missing an end for the ground to frame rail wire $20.00ea '91 Turbo negative harness A body most likely but might also work with G&P cars. $20.00 '91 Spirit R/T Positive harness good condition $25.00 L body turbo fuel pump wiring harness. Runs under the floor to the tank. $25.00 Box of misc. harnesses. L body turbo neg. harness, G/J/H Neg. harness, G/J/H/P positive harnesses and about 5 fuel rail harnesses $25.00 Everybody keeps motors and transmissions along with the other good hot hard parts but harnesses get overlooked. Get them now because when I move what hasn't sold gets tossed in the trash. Want a few or all of them, lets deal. The more you buy the better I'll drop the package price. Thanks, Cliff Ramsdell Treasurer, NESDAC '86 GLHS 210 Shelby Posi and Shelby Roll Cage Pics's of 210 here: http://superdave369.home.comcast.net/86glhs/86glhs.html '29 Model A, 239 flathead V-8, 3 speed [EMAIL PROTECTED] http://www.members.aol.com/mopartek/home.html "Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...Holy $hit!! What a Ride!!" ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: A few things
while cleaning out the garage I came across a few things that I am no longer going to use! First - I have a complete tail panel and lights from a 92 IROC. I bought this to convert a 87 Daytona I had to the newer tail lights. Been in my garage for close to seven years. $100 plus shipping. It's in a big box - so shipping is going to run in the $30-$40 range I would guess. Next - a complete set of Shelby CSX -T floor mats. No rips, wear marks, etc... they are a little dirty from being in the attic for the last six or seven years - $100 plus shipping Local pick up is also available if you are in the Denver area! :-) I have pics if you need them. ~Ron Dacono, CO 1976 Dodge W100 Powerwagon 2001 Chrysler 300M ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 88 T-Top Shelby Z 67k miles
Call them. Not my car. 319-462-5714 or 319-821-1570 You are not mistaken. 1988 Black T-Top Shelby Daytona Z Turbo 2 5 speed with only 67,000 miles. All the goodies inside. Air-Adjust Drivers seat. Electric everything. Infinity Stereo Cassette. Gray Cloth. Crab wheels with real good 225/50/15's Seller stated is has brake issues. Said to run very strong. Obvious issues are paint, minor rust on left rear wheel opening. Right A-Pillor trim cracked, right door window rubber scraper cracked. Headlight doors stay shut. Some dings on hood and fenders. Doors look ding free. head liner sagged. Best Part .. $ 1200 ... 5 hours from Minneapolis or Chicago or St Louis or Omaha. Biebers Auto Service. Anamosa Iowa. Can't buy it myself. Someone needs this car. Rock & Roll with a Shelby or two.. or 1/3 Dozen) Steve and Dee Kalmes Springville, Iowa 89 CSX-VNT #467 (slot car) 88 CSX-T #475 (show car) 87 CSX #311 (go car) 87 CSX #488 (toy car) www.hometown.aol.com/sdkalmes/shelby475.html http://www.abcs.com/cooke/shelbyregistry/stevek.html www.440magnum-network.com/cgi-bin/search/jump.cgi?ID=954 www.shelbycsx.com/gallery.shtml ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: forged shortblok and ported head
I have for sale the following: 1989 Common block 2.5. Has JE forged pistons, t2 rods, resized, shotpeened, top drilled for better oiling, and ARP rod bolts installed. Clevite 77 rod and main bearings, new intermediate shaft bearings and ARP main studs. Also includes new melling oil pump and 2.5 pick up tube. We have taken off the main caps and checked the bearings, and everything looks great. This block has less than 500 miles. Customer needed $$ so I bought his car. I am parting it out since I need the space more than I need the parts. The only bad about the block is the pan is dented, We will leave on for shipping, but I would suggest replacing before running it, and the dipstick was JB welded on. Motor $700 pick up in the Houston area or add $175 to crate and ship Ported swirl head. Nice port work, has +1mm valves, and MP valve springs, hardened keepers and chromoly retainers. No cam lifters, or followers. $650 for head, add $75 for lifters, followers and roller cam. Cost to ship aprox. $30 Thanks, Cindy ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1991 Dodge Spirit R/T White, on eBay
Hey guys, if any of you are looking to move up to T-III power, check out my white Spirit R/T on eBay. Comes with spare short block and spare head. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4648773016 Andy In Friendswood 1958 Chrysler Windsor 4hdtp, White 1970 Plymouth Fury Cv 440, Red 1991 Dodge Spirit R/T, White 1995 Chrysler New Yorker, White 2001 Saab 9-3 Viggen Convertible ___ Try the New Netscape Mail Today! Virtually Spam-Free | More Storage | Import Your Contact List http://mail.netscape.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 350HP 1989 SHELBY CSX #289 - SOCAL - $5,400 =(
Please see: http://www.viplift.com/shelby.html Don't just search. Find. MSN Search Check out the new MSN Search! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 91 Shadow ES Convert. T1 5speed - intercooled! Ninjas!
I'm selling my white 91 Shadow Convert T1 5sp. White. Overall it's in fair/good condition. I drive it several times a week. Here's what I've done to it: - AM/FM/CD - 89 Shadow ES high back buckets installed. Driver's side is power. - White Ninja wheels with 2 new tires. - 4 spoke leather airbag wheel from Daytona installed. - Intercooled with new R/T radiator and intercooler. I used a Shadow VNT lower metal intercooler hose and the stock airbox with K&N filter. Looks stock! Ready to install Gus valve! - Clutch installed about a 3 years ago. Clutchnet pressure plate and R/T disk. - No rust. - Includes the original 15" pumper wheels & tires. - Doesn't leak or burn oil, runs and shifts great! - I put Taylor wires and a good rotor & cap on it/. - I've run Mobil 1 or other synthetic oil w/a Mobil 1 filter since I've had it. I think I bought it when it was around 120K miles. - Just replaced the head gasket. No problems with the head or pistons. When I did the clutch job I replaced the front bearing retainer b/c the other one was grooved. I wanted a nice smooth clutch. I also had the flywheel ground then and replaced thepan seal and rear main seal. ~170K miles. Problems: - Top will need to be replaced - AC has been converte to 134a but it has a slow leak. So, it's currently not charged. - Paint on rear deck and rear bumber is peeling. The rest of the car is fine. - Rear bumber is cracked - Right side power window doesn't work. - Odometer just stopped about 2 months ago on 168K. Speedometer still works. Pics available upon request. It's in Mebane, NC. Central NC 27302. $1400 Thanks, Ed Mazurek 336-792-4629 (Home) 919-392-6936 (Work) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> fs 86 glhs t2
fs 86 glh t2 converted, runs strong, needs some work, is driven a few times a week. lots of new parts 1500 obo, email or call 563-324-0208 must go too many cars, need room Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 87 GLHS in Augusta GA
I am selling my '87 GLHS to make room for other projects. In short, it runs well, is solid mechanically, needs paint/bodywork (driver's door bumped in a parking lot incident, see pics), could use new tires, front koni's could use a rebuild. Currently has 98k miles. I've driven it very little and never raced it. Below is the original listing from the seller I bought the car from. In addition to that list, I have a complete Positive Impressions decal kit w/ Shelby window sticker. Extra parts including Turbo XS BOV, spare taillights, spare Air Dam/Bumper cover, interior/exterior panels, original block, and more that will go with the car. $3000. http://home.comcast.net/~manteiv/wsb/html/view.cgi-photos.html-.html -87 GLHS for sale. New engine, balanced, ARP rod bolts, light flywheel, all new turbo water and oil hoses, new radiator, new Indy intercooler, new 2 piece intake, new fuel press regulator, axles rebuilt, new intermediate shaft bearing and U joint, new A/C hoses and almost new compressor and clutch, rebuilt minivan front brake calipers, rear discs, new headliner, Infinity AM/FM/Cassette. most parts used were factory Mopar. Car has 79,000 miles. It needs paint and carpet. All Shelby stuff is there. Thanks, Brian Augusta, GA '98 r/t-vnt '87 glhs #343 '02 fz1 http://home.comcast.net/~manteiv/ http://www.cardomain.com/ride/2266679 http://www.cardomain.com/ride/2266686 http://home.comcast.net/~manteiv/wsb/html/view.cgi-photos.html-.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Parts left and new prices
parts left and reduced prices Parts for sale all located in London Ontario and priced in Canadian and do not include shipping. Prices are not firm so make offers.ALL PARTS NEED TO GO MAKE OFFERS Blueprinted 2.5L common block 20 over. All seats have been turned decked tanked check. All new bearing and seals. All machining was done by Rob Attichson. Also has Turned crank with bearings. Turned and cleaned Rods with new bearings oil pump water pump and extras included(700), Pick up preferred and will come with engine stand. FM 475 cam lightly used great condition.(175) Hybrid To4/To3E turbo .63/.48 comes with braided lines used for a few days only before removed brand new in excellent condition(600) 2 Daytona IC rad combos, one in great condition(from texas), other is ok with no leaks missen IC but still has bracket.(100) (50) White Daytona bulge hood. Make Offer Daytona 3 piece spoiler. Make Offer Daytona side skirts and door effects. Make Offer. Daytona gas tank good condition. (50 OBO) 16" white pumpers with centre caps, no tires in good condition Also for sale or to be parted out. 1989 Daytona Shelby. T-Top. Make offers Complete T II engine runs strong,A/C delete bracket(500 obo, make offers) Engine had new rings installed 2 years ago and a high flow oil pump engine runs great. Cap and rotor replaced 1 year ago(300) 2.5" exhaust, comes with cat muffler and poly hangers (120 obo) Sealed beam conversion Lights, 60 A555 trans with cables and shifter (250 obo, make offers) Car was stolen and stereo gutted so interior has damage. T-tops n ok condition have proper tie downs and extra bags (4), new are new and made by my aunt. FogLight 16" pumpers with tires. used 2.5L poor condition, FREE or best offer. lol Contact me for parts and prices or for the entire car. [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS L-Body Radio Bezel and A/C Ducts, Garrett Swing Valve
Bezel http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8067256961 Swingvalve http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8067256961 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Wiring harnesses, SC, GLH, S60 and more stuff
Hi all, More cleaning up going on around the shop and found some more stuff. Some things posted here and some on ebay here http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmopartek ebay stuff is going up later. Remember shipping is extra and everything is located in Enfield, CT. OK, here we go. Wiring harnesses and parts. I found 4 big old boxes full of harnesses and parts some need work but all are complete, sold as is. '86/'87 Shelby Charger underhood harness for TI motor. This is just the main harness with no sub harnesses, I have 2 of them $50.00 ea. Omni Super 60 harness kit. '89 G body underhood harnesses complete with all three sub harnesses, positive, negative and fuel rail. It also comes with an Omni carb underhood harness to make your own GLH Super 60 harness $85.00 '88 Turbo negative wiring harness G/J/H body TI & TII cars Nice $20.00 '89 Turbo negative wiring harness G/J/H body TI & TII cars Nice $20.00 '90 Turbo negative wiring harness G/J/maybe P body I have 2. One nice the other missing an end for the ground to frame rail wire $20.00ea '91 Turbo negative harness A body most likely but might also work with G&P cars. $20.00 '91 Spirit R/T Positive harness good condition $25.00 L body turbo fuel pump wiring harness. Runs under the floor to the tank. $25.00 L body Turbo negative wiring harness converted to a Nippondenso alt end, nice clean bolt in harness $50.00 Box of misc. harnesses. L body turbo neg. harness, G/J/H Neg. harness, G/J/H/P positive harnesses and about 5 fuel rail harnesses $25.00 Everybody keeps motors and transmissions along with the other good hot hard parts but harnesses get overlooked. Get them now because when I move what hasn't sold gets tossed in the trash. Want a few or all of them, lets deal. The more you buy the better I'll drop the package price. Thanks, Cliff Ramsdell Treasurer, NESDAC '86 GLHS 210 Shelby Posi and Shelby Roll Cage Pics's of 210 here: http://superdave369.home.comcast.net/86glhs/86glhs.html '29 Model A, 239 flathead V-8, 3 speed [EMAIL PROTECTED] http://www.members.aol.com/mopartek/home.html "Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...Holy $hit!! What a Ride!!" ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS LAST TIME $800 1990 White Spirit Turbo - lots of goodies but needs some stuff
Hello all. It's a White 1990 Spirit ES and the car has been my daily driver for years (until last week) and has been a real good, reliable car. The current mileage is 120,080 and the car is located in Clinton Township Michigan (just north of Detroit). I'm reducing the price to $800 but if it doesn't find a home with this price, it's time to start parting it out - a shame because it's a real nice car - just in need of a good used turbo and paint. The bad parts about the car are these: 1. The turbo is leaking oil into the exhaust and the shaft has some play - so at the least it needs bearings and seals. It does boost up just fine, so I'm assuming the rest of the turbo is fine too. 2. The body has some rust on the bottom of the doors, bottom lip of the trunk lid and front lip of the hood. It also has some surface rust and lots of peeling paint on the roof. 3. The auto trans is getting tired - it scoots ok, but not the best from the 1st to 2nd shift - it may just need the bands adjusted but I wouldn't bet too much money on that. Please don't let this part scare you, for a daily driver, you won't have a drop of trans problems, only if you're pushing it to the limit. Believe me it still gets up and goes very, very well. The reason for my getting rid of it is that I'm just not interested in repairing the turbo as it's a PITA and the body work is not something I do. So, it's been a great car, but it's time to move on. I have some pics already but I can try to take detailed pics if you need, just let me know. Here's the list of interesting items. Performance parts 1. Garret Turbo 2 (needs new bearings) - smokes when first started 2. 2.5" downpipe 3. Braided Aeroquip hoses for oil and water to turbo 4. 58mm throttlebody - one of a kind that has the proper cam lever for the automatic kickdown. 5. Ported 1 piece intake manifold - ported at the head and matched to the 58mm throttlebody. 6. Swirl Head has polished chambers, is lightly ported on the runners, lots of bowl work and a 3 angle valve job with Gary D's recommended angles with stock valves. Maybe 10,000 miles on the rebuilt head. 7. Exhaust manifold is lightly ported and has a thermocouple attached. 8. 87 Daytona Radiator and intercooler 9. OEM intercooler hoses and Air Filter Box 10. Oversize auto trans cooler Extras 1. Everything Works!! 2. AC works GREAT - good old R12 not the crumby new stuff. This baby gets cold. 3. Very clean interior - door panels, seats, trim, even the headliner looks great. 4. Sony CD player with built in EQ and Sub Crossover and aftermarket speakers - I don't remember exactly but I think they're Boston Acoustic's. 5. Wired for amps in the trunk. 6. Cruise works great 7. Power windows, mirrors, driver's seat and locks all work. 8. All wheel disk brakes. 9. Like new tires. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS PRICE REDUCED 1990 White Spirit Turbo - lots of goodies but needs some stuff - $1000
Hello all. It's a White 1990 Spirit ES and the car has been my daily driver for years (until last week) and has been a real good, reliable car. The current mileage is 120,080 and the car is located in Clinton Township Michigan (just north of Detroit). I'm reducing the price to $1000 but if it doesn't find a home with this price, it's time to start parting it out - a shame because it's a real nice car - just in need of a good used turbo and paint. The bad parts about the car are these: 1. The turbo is leaking oil into the exhaust and the shaft has some play - so at the least it needs bearings and seals. It does boost up just fine, so I'm assuming the rest of the turbo is fine too. 2. The body has some rust on the bottom of the doors, bottom lip of the trunk lid and front lip of the hood. It also has some surface rust and lots of peeling paint on the roof. 3. The auto trans is getting tired - it scoots ok, but not the best from the 1st to 2nd shift - it may just need the bands adjusted but I wouldn't bet too much money on that. Please don't let this part scare you, for a daily driver, you won't have a drop of trans problems, only if you're pushing it to the limit. Believe me it still gets up and goes very, very well. The reason for my getting rid of it is that I'm just not interested in repairing the turbo as it's a PITA and the body work is not something I do. So, it's been a great car, but it's time to move on. I have some pics already but I can try to take detailed pics if you need, just let me know. Here's the list of interesting items. Performance parts 1. Garret Turbo 2 (needs new bearings) - smokes when first started 2. 2.5" downpipe 3. Braided Aeroquip hoses for oil and water to turbo 4. 58mm throttlebody - one of a kind that has the proper cam lever for the automatic kickdown. 5. Ported 1 piece intake manifold - ported at the head and matched to the 58mm throttlebody. 6. Swirl Head has polished chambers, is lightly ported on the runners, lots of bowl work and a 3 angle valve job with Gary D's recommended angles with stock valves. Maybe 10,000 miles on the rebuilt head. 7. Exhaust manifold is lightly ported and has a thermocouple attached. 8. 87 Daytona Radiator and intercooler 9. OEM intercooler hoses and Air Filter Box 10. Oversize auto trans cooler Extras 1. Everything Works!! 2. AC works GREAT - good old R12 not the crumby new stuff. This baby gets cold. 3. Very clean interior - door panels, seats, trim, even the headliner looks great. 4. Sony CD player with built in EQ and Sub Crossover and aftermarket speakers - I don't remember exactly but I think they're Boston Acoustic's. 5. Wired for amps in the trunk. 6. Cruise works great 7. Power windows, mirrors, driver's seat and locks all work. 8. All wheel disk brakes. 9. Like new tires. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Shelby Dakota #952
Listing for an SCCA Member (wished I owned it) See info below. >>> FOR SALE 1989 Shelby Dodge Dakota 32,000 original miles # 952 of 1500 Special Shelby interior Shelby Decals exterior Exterior is RED 318 V-8 all original Stored Winters Decals on the body are slightly peeled on the edges only. 100% original except tires. Original tires weather checked and were replaced. Did not see any rust , this vehicle is owned by a friend of mine. The vehicle is located in Cedar Rapids Iowa. 319-294-0881 ask for Brian < Rock & Roll with a Shelby or two.. or 1/3 Dozen) Steve and Dee Kalmes Springville, Iowa 89 CSX-VNT #467 (slot car) 88 CSX-T #475 (show car) 87 CSX #311 (go car) 87 CSX #488 (toy car) www.hometown.aol.com/sdkalmes/shelby475.html http://www.abcs.com/cooke/shelbyregistry/stevek.html www.440magnum-network.com/cgi-bin/search/jump.cgi?ID=954 www.shelbycsx.com/gallery.shtml ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: GLHS Konis, Steering wheel, Intercooler, GLH GFX, Mopar Collectibles & More
HI all, Listed a bunch of stuff on ebay including my collection of Chrysler Master Tech Gold tool awards that I recieved over the years. Please check them out here http://motors.search.ebay.com/_W0QQsassZmopartek and thanks for bidding. Thanks, Cliff Ramsdell Treasurer, NESDAC '86 GLHS 210 Shelby Posi and Shelby Roll Cage Pics's of 210 here: http://superdave369.home.comcast.net/86glhs/86glhs.html '29 Model A, 239 flathead V-8, 3 speed [EMAIL PROTECTED] http://www.members.aol.com/mopartek/home.html "Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...Holy $hit!! What a Ride!!" ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 83 Shelby Charger
I have been trying to send this without luck so here it is again! I have been lurking on this list for sometime but I am afraid the inevitable has happened, I must sell my charger. Quick specs: 83 Shelby Charger (Silver) Original Wheels Decent Interior Lots of engine work I have done many things to this car to enhance the engine. It is a good car but it needs some timing work and a few seals repaired. Buyer to arrange shipping. Asking 1100 OBO and i stress OBO! I need to get rid of it. I will take anything for it as long as I don't have to part it out or send it to a junk yard. I live in Laramie, Wyoming right off of I80 for easy pickup! -- Michael Stephens Computer Engineering Student University of Wyoming http://students.uwyo.edu/falcon [EMAIL PROTECTED] or [EMAIL PROTECTED] Old Software Engineers Never Die, The just reboot. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS 1990 White Spirit Turbo - lots of goodies but needs some stuff - $1500
Hello all. I'm going to try and sell this car whole as I've received lots and lots of e-mails looking to buy the race parts but I'm pretty busy and would rather not remove everything. Here's the details. It's a White 1990 Spirit ES and the car has been my daily driver for years (until last week) and has been a real good, reliable car. The current mileage is 120,080 and the car is located in Clinton Township Michigan (just north of Detroit). I would like to get $1500 but if I'm way off course, someone politely let me know. The bad parts about the car are these: 1. The turbo is leaking oil into the exhaust and the shaft has some play - so at the least it needs bearings and seals. It does boost up just fine, so I'm assuming the rest of the turbo is fine too. 2. The body has some rust on the bottom of the doors, bottom lip of the trunk lid and front lip of the hood. It also has some surface rust and lots of peeling paint on the roof. 3. The auto trans is getting tired - it scoots ok, but not the best from the 1st to 2nd shift - it may just need the bands adjusted but I wouldn't bet too much money on that. The reason for my getting rid of it is that I'm just not interested in repairing the turbo as it's a PITA and the body work is not something I do. So, it's been a great car, but it's time to move on. I have some pics already but I can try to take detailed pics if you need, just let me know. Here's the list of interesting items. Performance parts 1. Garret Turbo 2 (needs new bearings) - smokes when first started 2. 2.5" downpipe 3. Braided Aeroquip hoses for oil and water to turbo 4. 58mm throttlebody - one of a kind that has the proper cam lever for the automatic kickdown. 5. Ported 1 piece intake manifold - ported at the head and matched to the 58mm throttlebody. 6. Swirl Head has polished chambers, is lightly ported on the runners, lots of bowl work and a 3 angle valve job with Gary D's recommended angles with stock valves. Maybe 10,000 miles on the rebuilt head. 7. Exhaust manifold is lightly ported and has a thermocouple attached. 8. 87 Daytona Radiator and intercooler 9. OEM intercooler hoses and Air Filter Box 10. Oversize auto trans cooler Extras 1. Everything Works!! 2. AC works GREAT - good old R12 not the crumby new stuff. This baby gets cold. 3. Very clean interior - door panels, seats, trim, even the headliner looks great. 4. Sony CD player with built in EQ and Sub Crossover and aftermarket speakers - I don't remember exactly but I think they're Boston Acoustic's. 5. Wired for amps in the trunk. 6. Cruise works great 7. Power windows, mirrors, driver's seat and locks all work. 8. All wheel disk brakes. 9. Like new tires. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS - UPDATE t-stat and some other small items
Injectors and SMEC are sold. Thanx, Howard ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: CSX # 159 for Sale in Akron OH
Hello everyone I joined this group specifically to try to sell this car to someone who would appreciate what it is I'm pretty firm at $1100, and I hate to let it go for that. Details are as follows. I've had this car for six years. I just had the engine/trans out to rebuild the transmission and replace the leaking oil/coolant lines going to the turbo. I am currently having a leakage issue with the oil pan and possibly the valve cover. Sounds silly to sell something for such a minor problem, but I'm really tired of working on it and have been thinking about selling it for a while. I have been driving it daily for a while so it has your typical wear on the paint and seats. Underhood is typical with just a factory rebuilt turbo, and the air box removed with a KNN conical filter in place. It also has a stage 1 roller cam. The car is very much drivable and runs great. It has the original Centurions on it in good condition with tires that will only be good in the summer. I also have another set of Shadow steel wheels that go with it, that include two brand new tires. I've installed five Autometer phantom gauges including A/F, Water, Oil, Boost, and Fuel pressure. Three are in the center console and two are on the pillar with a universal pillar pod. If anyone wants pictures or any more info please let me know. Feel free to forward this to anyone in the area who might be interested. Thanks, Kortney Goare [EMAIL PROTECTED] 330-634-0245 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: CSX-VNT #7
The car is located just North of Denver, CO Has all Shelby related parts -including front air dam (two cracks), and valve cover. NO RUST - originally a Texas car. New VNT turbo, new head, under-drive pulleys, 804 injectors, FM Enforcer IV cam, Stage II SMEC, new tires(wide), new shocks and struts (KYB), new brakes, new windshield. Has some paint fade on rear wing, and front air dam. 105K miles. I rebuilt the motor on late 1999 - to have the bottom end go out after only 228 miles (bad oil pump). I have another 89 CSX short block that goes with the car. There are more parts that go with the car - I just can't remember them all. I need to get at least $3,500 for this car which I think is more than fair due to the overall condition of the car. I can get current pictures for anyone that is interested in the car, it is currently under a car cover where it's been for the last six years! ~Ron Dacono, CO 1976 Dodge W100 Powerwagon 1989 Shelby CSX-VNT #007 (For Sale) 2001 Chrysler 300M ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS-Mopar performance G head & stock G head + other stuff
Mite help to add where your from.. that way if someones local to ya, you could possibly unload more stuff in one shot :) Chris Pauluk - Modesto CA. - 1984 Rampage "Ramlet" _www.cardomain.com/id/solo2rampage_ (http://www.cardomain.com/id/solo2rampage) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS-Mopar performance G head & stock G head + other stuff
Hello all I have a couple of parts for sale- 1. an old Mopar Performance head that is a G casting. It doesn't have the valves and I don't think it's the extra large valve version. The ports are clearly larger than a stock G head but they are untouched and only as cast. The holes take 11mm head bolts and the head could use a cleaning - $150 plus shipping. 2. a stock G head -complete but dissassembled. NO CRACKS between the valves! The date code says 84 and this head also takes 11mm head bolts. This head is could also use a cleaning. - $75 plus shipping 3. Ultra Club (steering wheel lock) - near mint shape with 2 keys - $15 plus shipping 4. T2 exhaust manifolds - 1 is stock and the other is tapped for a thermocouple - both are in excellent shape - $15 plus shipping each. 5. 1985 2.2 turbo driveability book - not available to gen public - $10 plus shipping 6. Vortec FMU - Rising rate fuel pressure regulator - great shape - $40 plus shipping I can take pics or answer questions if ya need. Thanx, Howard ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: Dc Intercooler
People Like Brian should not be allowed to have a E-bay account . He just sabotaged my auction and left me another negative for it. I have had problems with him before and I suggest no one deals with him. with his 7+ negative feedbacks out of less then 20. I now have 2 negatives because of him. Sorry to be so off topic, But I dont like the idea of someone trashing me and not atleast adding my 2 cents after I get it resolved I will Update the URL, From: "Brian Schulteis" <[EMAIL PROTECTED]> To: "dave thompson" <[EMAIL PROTECTED]> CC: shelby-dodge@imagicomm.com Subject: Re: SD> FS: Dc Intercooler Date: Wed, 19 Apr 2006 22:40:49 -0700 >Attention all! I bought from this loser on Ebay a couple months ago, I >sent him $36 for an intercooler hose I won. He never sent the item, I >filed a claim with paypal and only recovered $11 from his account. He >has yet to make good on the theft. >I put an end to his auction, nobody else will get ripped off by this >guy on my watch. You'd be out a helluvalot more money than I was. > >On 4/19/06, dave thompson <[EMAIL PROTECTED]> wrote: > > I just listed it on ebay, Bid to win! > > > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8058617207 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> FS: Dc Intercooler
Attention all! I bought from this loser on Ebay a couple months ago, I sent him $36 for an intercooler hose I won. He never sent the item, I filed a claim with paypal and only recovered $11 from his account. He has yet to make good on the theft. I put an end to his auction, nobody else will get ripped off by this guy on my watch. You'd be out a helluvalot more money than I was. On 4/19/06, dave thompson <[EMAIL PROTECTED]> wrote: > I just listed it on ebay, Bid to win! > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8058617207 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
