Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Glad I found this thread after running my SBT into the same „Verify Ethernet Connection“ loop, so thanks for the solution provided here. My Wifi is dead, too (hardly ever used it). There seem to be other side effects, my SBT refused to connect to a new server or mysb, that‘s where my troubles started. Some days ago I bought a second (used) SBT for another room - maybe the first one got jealous ;-) WustrowO's Profile: http://forums.slimdevices.com/member.php?userid=32729 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Thanks mrw! I've just ordered one on eBay. Fingers crossed! GB_Joe's Profile: http://forums.slimdevices.com/member.php?userid=21466 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
GB_Joe wrote: > Are there any simple ethernet-to-wifi gizmos which might give it a new > lease of life Search the forum for "Vonets". There have been a number of posts describing one or more such gizmos under this brand that have apparently been successfully used. mrw's Profile: http://forums.slimdevices.com/member.php?userid=38299 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
SqueezedUser wrote: > > On the problematic SBT we have: > > > - all Wlan signal information fields are blank in the menu > "Settings/Advanced/Diagnostic/Wireless" - trying to manually firing up Wlan on the terminal gives an error > (i.e., # ifconfig wlan0 up => ifconfig: SIOCGIFFLAGS: No such > device) - selecting the menu "Settings/Advanced/Networking/Choose Network" > RESTARTS the endless loop "Verify Ethernet Connection" :mad: - > > > > Firstly, thanks to all who've contributed to this thread, because I've had exactly the same issues and would not have had the patience to do all this stuff! Unfortunately my SBT does not really have the option of plugging in to my network with a wire for anything other than diagnostics. I'm thinking from what I've read here that if I have these symptoms then the wifi really is dead? Are there any simple ethernet-to-wifi gizmos which might give it a new lease of life, or should I pass it on to someone who's able to plug it in? I don't want to waste time and money on something that's unlikely to work, so any advice would be really appreciated. GB_Joe's Profile: http://forums.slimdevices.com/member.php?userid=21466 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
mrw wrote: > There were seven changes that impacted networking set up. I have not > been following the thread, so I don't know which might be a likely > candidate. Here's a list of the changes, should someone wish to review. > The last one looks intriguing, it seems that it might disable ethernet > unless connectivity to mySB.com can also be established. > > Test connectivity to mySB.com upon detection of Ethernet - In addtion to > check for an Ethernet link also ping mySB.com and only if mySB.com is > available use Ethernet. > https://github.com/Logitech/squeezeplay/commit/7dc2ba0c2989869dcf58c2b15a22f9d5f0649559 Running the community radio firmware with qemu yields the same endless loop verifying the ethernet connection issue. Reverting commit ' 7dc2ba0c2989869dcf58c2b15a22f9d5f0649559' (https://github.com/Logitech/squeezeplay/commit/7dc2ba0c2989869dcf58c2b15a22f9d5f0649559) allows you to complete the setup and access the menus, settings, etc. Granted it's not comparing the issue on the same hardware but does seem to indicate that the above change has the potential to cause issues should mysb.com eventually be retired. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=LL5P6365KQEXN&lc=CA&item_name=Squeezebox%20client%20builds¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
mherger wrote: > https://github.com/Logitech/squeezeplay/tree/public/7.8/src > > ^ that's where you'd find the code. But... where in there? > There were seven changes that impacted networking set up. I have not been following the thread, so I don't know which might be a likely candidate. Here's a list of the changes, should someone wish to review. The last one looks intriguing, it seems that it might disable ethernet unless connectivity to mySB.com can also be established. Description: Network setup changes - Wait at least 2 seconds while scanning the network to allow the user to read the screen https://github.com/Logitech/squeezeplay/commit/438fde489a0627e4ecd329b8293c11ac158777c0 Description: Setup changes - Remove welcome screen - This also removes the hidden demo start which is now in the language selection step https://github.com/Logitech/squeezeplay/commit/9d773b4b3593a473f93d9e0ccdeb76bd6084bc7d Description: Setup changes - Remove welcome screen - This also removes the hidden demo start which is now in the language selection step https://github.com/Logitech/squeezeplay/commit/30c3c8479b42b07248a05a012153020427a7c044 Description: Setup changes - Add hidden demo start to language selection step https://github.com/Logitech/squeezeplay/commit/4da56ffe9c687b5eba6f0c15b73c8f001af5db38 Sort SSIDs by signal strength Sort the SSID list by signal strength https://github.com/Logitech/squeezeplay/commit/00de3e1e09e17734344f6b4b7009aa7db4d031b5 Test connectivity to mySB.com upon detection of Ethernet - In addtion to check for an Ethernet link also ping mySB.com and only if mySB.com is available use Ethernet. https://github.com/Logitech/squeezeplay/commit/7dc2ba0c2989869dcf58c2b15a22f9d5f0649559 mrw's Profile: http://forums.slimdevices.com/member.php?userid=38299 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
- Where in the code? The last observation shows the problem appearing after the Ethernet checking (which is fine but this is not advertised as such and not exited on) immediately followed by a Wlan check (which seems to be defective here and this hangs that SBT). That's a good question - to which I don't have a good answer. My involvement in SP development has been marginal. https://github.com/Logitech/squeezeplay/tree/public/7.8/src ^ that's where you'd find the code. But... where in there? -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Michael Great, isn't it. I finally had to upgrade to FW version 7.8.0 r16754 after connecting it to my LMS-Server (the latter left no choice). So now, it is running again and both SBTs have the very same release. Furthermore, I did some comparative tests between the 2 SBTs in the meantime and can now be a lot more precise now on - the "where" and - the "why" the endless loop may happen. Here are the bare facts: On the problematic SBT we have: - all Wlan signal information fields are blank in the menu "Settings/Advanced/Diagnostic/Wireless" - trying to manually firing up Wlan on the terminal gives an error (i.e., # ifconfig wlan0 up => ifconfig: SIOCGIFFLAGS: No such device) - selecting the menu "Settings/Advanced/Networking/Choose Network" RESTARTS the endless loop "Verify Ethernet Connection" :mad: - This last fact comes *precisely to the point*. On the "untouched" SBT we have: - all Wlan signal information fields do have a value in the menu "Settings/Advanced/Diagnostic/Wireless" - manually firing up Wlan on the terminal just works fine - selecting the menu "Settings/Advanced/Networking/Choose Network" gives *FIRST* "Verify Ethernet Connection", *AND THEN* "Searching Networks" which then lists plenty of neighbor Wlan SSIDs to choose from... :cool: Conclusions: - Where in the code? The last observation shows the problem appearing after the Ethernet checking (which is fine but this is not advertised as such and not exited on) immediately followed by a Wlan check (which seems to be defective here and this hangs that SBT). - Why may it happen? Most probably the initial setup after a factory reset directly jumps to that code section (very same Message and sequence?), hanging my SBT. Hope this could help for a code modification where some exit feature to the home screen, either immediately after the first running network interface is found or just on some manual event would be implemented. Many thanks for your support :) P.S. Any hint to check the Wlan circuitry? There seems to be no add-on module in the SBT (IC/antenna directly soldered to the main board?) Kind regards Pierre mherger wrote: > > Meaning that the SBT is back, running (although with an quite older > > release). > > Wow... that's quite a finding. Which means that the latest firmware > would not be able to set up a device from scratch? > > What would be interesting now is what happens if you update to the > latest firmware. Would it continue to work?... > > -- > > Michael SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Meaning that the SBT is back, running (although with an quite older release). Wow... that's quite a finding. Which means that the latest firmware would not be able to set up a device from scratch? What would be interesting now is what happens if you update to the latest firmware. Would it continue to work?... -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello, Just *SOLVED* the SBT *endless "Verify Ethernet connection" looping screen* appearing after having reset a wired SBT (*FW 7.8.0 r16754*) the following way: - copy the file http://update.slimdevices.com/update/firmware/7.7.3/fab4_7.7.3_r16676.bin to a FAT-formatted (old) SD-Card - rename that file to fab4.bin - insert the SD card in the "looping" SBT, which reacts with a menu! - select firmware upgrade to FW 7.7.3 r16676 OK Thereafter it reloads the old firmware, then the *SBT reboots normally*, asking for the mysqueezebox account parameters... :cool: Meaning that the SBT is back, running (although with an quite older release). Hoping this workaround may help. Kind regards Pierre SqueezedUser wrote: > Hello Paul > > Perhaps. Please find both dmesg files in attachment. Is there any other > means of getting further HW-status information - there is only one and > the same module loaded in both SBTs: "sd8686", nothing about > wlan-specific HW? > > Kind regards > Pierre SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Paul Perhaps. Please find both dmesg files in attachment. Is there any other means of getting further HW-status information - there is only one and the same module loaded in both SBTs: "sd8686", nothing about wlan-specific HW? Kind regards Pierre Paul Webster wrote: > Sounds like a broken or unseated WiFi card ... I did not spot anything > in your earlier dmesg dump referring to it - although it would be good > to see a dmesg log from a Touch that has one working. +---+ |Filename: dmesg-SBT-BAD.txt| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30463| +---+ SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Sounds like a broken or unseated WiFi card ... I did not spot anything in your earlier dmesg dump referring to it - although it would be good to see a dmesg log from a Touch that has one working. Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Michael, Following http://wiki.slimdevices.com/index.php/SqueezeOSNetworking, I tried the following: - Remove Ethernet cable - Perform Factory Reset (via fab4 button) - Upon Language Screen appearing, choose English => beep => nothing else happens (Language Screen remains) - Connect USB-Keyboard; type CTL-ALT-F3 - Login as root, pwd 1234 Then, typing command: "ifconfig wlan0 up" (which works fine on my other SBT) and which just gives: # ifconfig wlan0 up ifconfig: SIOCGIFFLAGS: No such device OK, trying to set it in the Autostart script according to the wiki chapter " Autostart wireless" Autostart wireless - Remove auto eth0 in /etc/network/interfaces : Done - Add auto wlan0= in /etc/network/interfaces ('ifup -a' in '/etc/init.d/rcS' will start it): Done - Only remove disabled=1 from the one wireless setting to start in /etc/wpa_supplicant.conf: No wireless setting yet in that file Then, typing ifconfig => only interface lo is up... manually firing up ifconfig wlan0 up => error message above manually firing up eth0 => no error; etho appears after typing ifconfig Should I try to startup the wlan0 interface with "ifup" instead of "ifconfig ... up"? What is the full command-line syntax in this case? If I only could get the SBT home-screen back... Many thanks for your support Kind regards Pierre mherger wrote: > > On this SBT, trying to start the connection on the command line (no > home > > screen!) just gives: > > Can't you do another factory reset with the ethernet cable unplugged, > then try to configure it as WLAN? > > > => Is there really no way to restore an older firmware via the > > ssh-connection? The problem appeared after a simple factory reset. > > The firmware you're using is what probably 90% of all Touch units out > there use. I doubt downgrading will help. And no, I still don't know how > > to do it manually. Did you check wiki.slimdevices.com? > > -- > > Michael SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
On this SBT, trying to start the connection on the command line (no home screen!) just gives: Can't you do another factory reset with the ethernet cable unplugged, then try to configure it as WLAN? => Is there really no way to restore an older firmware via the ssh-connection? The problem appeared after a simple factory reset. The firmware you're using is what probably 90% of all Touch units out there use. I doubt downgrading will help. And no, I still don't know how to do it manually. Did you check wiki.slimdevices.com? -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
On this SBT, trying to start the connection on the command line (no home screen!) just gives: # ifconfig wlan0 up ifconfig: SIOCGIFFLAGS: No such device On my other SBT, this command works perfectly well however... => Is there really no way to restore an older firmware via the ssh-connection? The problem appeared after a simple factory reset. Kind regards Pierre mherger wrote: > >Jan 1 01:07:17 squeezeplay: ERROR squeezeplay.task - Task.lua:75 > task error halfDuplexBugVerification: > ...ve/applets/SetupNetworking/SetupNetworkingApplet.lua:378: attempt to > index local 'iface' (a nil value) > > This part sounds like a bug in Squeezeplay. Or at least unwanted > behaviour due to some unexpteced data. > > > Suggestion - Perhaps there is a low level ethernetworking > > interoperability problem that you can avoid by plugging in somewhere > > else. > > if you have another networked ethernet hub/switch then try plugging > it > > into that one instead ... e.g. a spare port on your ISP router. > > Good idea! > > > Once you get past the language selection part then ... maybe things > will > > I think the device hanging is not due to the language selection, but > above failure. I tried to figure out what triggers the setup route, > rather than just going to the main menu. Haven't found it yet. But I'm > pretty sure it should be feasible to set some flag in some config file > to get there. > > > start working when you replug it back in the place where you want it > (or > > you can enable wifi). > > Wouldn't you be able to use Wifi if you did another factory reset? > > > -- > > Michael SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Jan 1 01:07:17 squeezeplay: ERROR squeezeplay.task - Task.lua:75 task error halfDuplexBugVerification: ...ve/applets/SetupNetworking/SetupNetworkingApplet.lua:378: attempt to index local 'iface' (a nil value) This part sounds like a bug in Squeezeplay. Or at least unwanted behaviour due to some unexpteced data. Suggestion - Perhaps there is a low level ethernetworking interoperability problem that you can avoid by plugging in somewhere else. if you have another networked ethernet hub/switch then try plugging it into that one instead ... e.g. a spare port on your ISP router. Good idea! Once you get past the language selection part then ... maybe things will I think the device hanging is not due to the language selection, but above failure. I tried to figure out what triggers the setup route, rather than just going to the main menu. Haven't found it yet. But I'm pretty sure it should be feasible to set some flag in some config file to get there. start working when you replug it back in the place where you want it (or you can enable wifi). Wouldn't you be able to use Wifi if you did another factory reset? -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Some bits from the files dmesg (looks OK to me - but would need comparison with another ethernet connected Touch to see if more usually comes out) Code: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. eth0: status: link down. eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete. >From pre-lang Code: Jan 1 01:01:27 kernel: eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete. Link comes up - time not yet set from internet. 8 seconds later - IP address assigned Code: Jan 1 01:01:35 udhcpc[723]: Lease of 192.168.1.112 obtained, lease time 86400 Jan 1 01:01:35 root: udhcpc_action eth0 bound ip=192.168.1.112 About 1 minute later ... very fast retries ... perhaps implying networking hard error (not a timeout) and still no time Code: Jan 1 01:02:39 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {mysqueezebox.com_Request}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) Jan 1 01:02:40 squeezeplay: WARN net.thread - NetworkThread.lua:146 network thread timeout for Task(SocketHttp {fab4.squeezenetwork.com}(R)) and then the HalfDuplex check ... Code: Jan 1 01:07:17 squeezeplay: ERROR squeezeplay.task - Task.lua:75 task error halfDuplexBugVerification: ...ve/applets/SetupNetworking/SetupNetworkingApplet.lua:378: attempt to index local 'iface' (a nil value) Jan 1 01:07:17 squeezeplay: stack traceback: Jan 1 01:07:17 squeezeplay: /usr/share/jive/jive/ui/Task.lua:75: in function 'resume' Jan 1 01:07:17 squeezeplay: /usr/share/jive/jive/ui/Framework.lua:317: in function 'eventLoop' Jan 1 01:07:17 squeezeplay: /usr/share/jive/jive/JiveMain.lua:422: in function Jan 1 01:07:17 squeezeplay: (tail call): ? Jan 1 01:07:17 squeezeplay: /usr/share/jive/jive/JiveMain.lua:638: in main chunk Jan 1 01:07:17 squeezeplay: [C 0x615b9]: ? Jan 1 01:07:17 squeezeplay: [C 0x29fec]: ? Suggestion - Perhaps there is a low level ethernetworking interoperability problem that you can avoid by plugging in somewhere else. if you have another networked ethernet hub/switch then try plugging it into that one instead ... e.g. a spare port on your ISP router. Once you get past the language selection part then ... maybe things will start working when you replug it back in the place where you want it (or you can enable wifi). Other thing to work out is what it does once the language is set ... and do that by hand. Presumably it is writing to a config file to say which language has been chosen. Paul Webs
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Michael I have enclosed 2 versions of the /var/log/messages with the SD-Card removed, - the first: after power on and before choosing the language - the second: after having chosen the language and after some time it remains endlessly saying "Verify Ethernet Connection" You will also find the dmesg-output in the 3rd attachment. Regarding the Wlan-connection, the only way to try it out is via command-line (it is the only communication I have to this device; no Home-Screen just the ever-running hourglass...) but I didn't find any wlanX-device to "ifconfig up" and to "iwlist" and configure it thereafter... Surprisingly, I haven't seen anything except the ieee802.11 stack in the dmesg-output. Did I miss something? So for the moment, I'm stuck to the wire. P.S. I never used the Wlan with this SBT. Kind regards Pierre mherger wrote: > > Many thanks for your instructions. Formerly, I just transferred the > > messages logfile with the SD-card (did a clean shutdown before > removal). > > Now I could set up the SSH connection with your instructions below > (BTW. > > you have to add the parameters "-o > > KexAlgorithms=+diffie-hellman-group1-sha1 -c aes256-cbc" in either > the > > ssh- or scp- command lines on Linux) and it gets more comfortable... > > Ah, right. I've got that in my ~/.ssh/config file... always forget about > it. > > > |Filename: messages-20200526-1910.txt > > I compared this to a fresh file from one of my own Touchs. The biggest > difference indeed is what you posted before, some failure around > "halfDuplexBugVerification" - whatever that is... > > But as this is related to Ethernet, could you please try to use wlan > instead? And I'd recomment you remove the SD card and only insert it > when you want to transfer something. It's firing up slimserver, which > slows down things a lot, and introduces more noise to the log file. > > -- > > Michael +---+ |Filename: messages-20200526-0921BeforeLanguageSelection.log| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30439| +---+ SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Many thanks for your instructions. Formerly, I just transferred the messages logfile with the SD-card (did a clean shutdown before removal). Now I could set up the SSH connection with your instructions below (BTW. you have to add the parameters "-o KexAlgorithms=+diffie-hellman-group1-sha1 -c aes256-cbc" in either the ssh- or scp- command lines on Linux) and it gets more comfortable... Ah, right. I've got that in my ~/.ssh/config file... always forget about it. |Filename: messages-20200526-1910.txt I compared this to a fresh file from one of my own Touchs. The biggest difference indeed is what you posted before, some failure around "halfDuplexBugVerification" - whatever that is... But as this is related to Ethernet, could you please try to use wlan instead? And I'd recomment you remove the SD card and only insert it when you want to transfer something. It's firing up slimserver, which slows down things a lot, and introduces more noise to the log file. -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Mike One more comment: following addresses do get resolved without any problem: # nslookup fab4.squeezenetwork.com Server:192.168.1.1 Address 1: 192.168.1.1 internetbox.home Name: fab4.squeezenetwork.com Address 1: 52.51.150.149 ec2-52-51-150-149.eu-west-1.compute.amazonaws.com Address 2: 52.31.254.173 ec2-52-31-254-173.eu-west-1.compute.amazonaws.com Address 3: 34.247.45.207 ec2-34-247-45-207.eu-west-1.compute.amazonaws.com Address 4: 63.34.162.152 ec2-63-34-162-152.eu-west-1.compute.amazonaws.com Address 5: 34.244.198.169 ec2-34-244-198-169.eu-west-1.compute.amazonaws.com Address 6: 34.244.111.131 ec2-34-244-111-131.eu-west-1.compute.amazonaws.com as well as for getting a FW-image on the SD-Card, the transfer goes quite fast (until 99% where it gets stalled sometime before finishing): # df -h FilesystemSize Used Available Use% Mounted on /dev/root17.1M156.0K 16.1M 1% / ubi0:ubifs 17.1M156.0K 16.1M 1% /mnt/storage none 17.1M156.0K 16.1M 1% / none 61.4M 76.0K 61.4M 0% /dev /dev/mmcblk0p1 486.0M 98.6M387.5M 20% /media/mmcblk0p1 # pwd /media/mmcblk0p1 # wget http://update.slimdevices.com/update/firmware/7.9.3/fab4_7.8.0_r16754.bin . Connecting to update.slimdevices.com (13.224.89.17:80) fab4_7.8.0_r16754.bin 100% |*| 33476k 00:00:00 ETA Kind regards Pierre SqueezedUser wrote: > Hello Michael > > Many thanks for your instructions. Formerly, I just transferred the > messages logfile with the SD-card (did a clean shutdown before removal). > Now I could set up the SSH connection with your instructions below (BTW. > you have to add the parameters "-o > KexAlgorithms=+diffie-hellman-group1-sha1 -c aes256-cbc" in either the > ssh- or scp- command lines on Linux) and it gets more comfortable... > > You will find the messages logfile in attachment. > > Kind regards, > Pierre SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hello Michael Many thanks for your instructions. Formerly, I just transferred the messages logfile with the SD-card (did a clean shutdown before removal). Now I could set up the SSH connection with your instructions below (BTW. you have to add the parameters "-o KexAlgorithms=+diffie-hellman-group1-sha1 -c aes256-cbc" in either the ssh- or scp- command lines on Linux) and it gets more comfortable... You will find the messages logfile in attachment. Kind regards, Pierre mherger wrote: > >> Not directly IP related. But anything interesting in > /var/log/messages, > >> in particular towards the end of the file? > >> > >> Yes there is maybe something wrong there, after loading the plugins > and > >> starting the network polling (see extract at the end). > > I have no idea how you copied that log snippet, but could you please get > us a full copy of /var/log/messages? > > I _believe_ you can enable SSH using the following steps: > > - "vi /etc/inetd.conf": there should be a line for ssh at the bottom of > the file. Remove the # in front of it > - run "/bin/ps x -o pid,command | grep inetd | grep -v grep" to get the > pid of inetd > - run "kill -HUP [PID]" (put the pid there) > - try to ssh in to it > > -- > > Michael +---+ |Filename: messages-20200526-1910.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30422| +---+ SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Not directly IP related. But anything interesting in /var/log/messages, in particular towards the end of the file? Yes there is maybe something wrong there, after loading the plugins and starting the network polling (see extract at the end). I have no idea how you copied that log snippet, but could you please get us a full copy of /var/log/messages? I _believe_ you can enable SSH using the following steps: - "vi /etc/inetd.conf": there should be a line for ssh at the bottom of the file. Remove the # in front of it - run "kill -HUP" - try to ssh in to it -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Hi Michael Again, many thanks for your support. Please find my answers below. Kind regards mherger wrote: > > I updated my post in the meantime. Here is the delta-information. > > > I'm known not to see edits, as I follow the forum via mailing list... > > > I did a DNS-check with "nslookup www.tsr.ch" which perfectly works. > > As would "ping www.google.com", I guess? > This just works fine > > > > Finally doing an "nslookup mysqueezebox.com" gives 6 IP addresses > back. > > what about fab4.squeezenetwork.com? > This address is correctly "resolvable" over nslookup but does not answer > to ping. > > > > Which other IP-parameters should be checked from within the SBT? > > Not directly IP related. But anything interesting in /var/log/messages, > > in particular towards the end of the file? > > Yes there is maybe something wrong there, after loading the plugins and > starting the network polling (see extract at the end). > > > > Is there any script that can be edited in order to directly go to the > > home screen upon booting? > > There certainly is, but I don't know where yet... > > How comfortable are you navigating and editing in the console using vi? > > You could dig around /etc/squeezeplay/userpath/settings to see what is > there. > > Yes, there are 3 files: > > > > - SetupAppletInstaller.lua - SqueezeboxFab4.lua (alsa-related settings, brightness, ...) - SlimDiscovery.lua (MAC address, Player Name, mode) > > > > > -- > > Michael > > == > [...] > Jan 1 01:27:08 squeezeplay: WARN applet.SqueezeCenter - > SqueezeCenterApplet.lua:671 Restarting squeezebox server > Jan 1 01:27:09 squeezeplay: INFO squeezebox.server - > SlimServer.lua:744 connected mysqueezebox.com > Jan 1 01:27:09 squeezeplay: INFO squeezebox.server - > SlimServer.lua:756 self.mac being set to>nil > Jan 1 01:27:09 squeezeplay: INFO squeezebox.server - > SlimServer.lua:354 we don't downgrade, even if lower versioned > firmware is of more recent revision - ignoring > Jan 1 01:27:09 squeezeplay: INFO squeezebox.server - > SlimServer.lua:366 mysqueezebox.com > firmware=http://update.slimdevices.com/update/firmware/7.7.3/fab4_7.7.3_r16676.bin > force=false > Jan 1 01:27:09 squeezeplay: INFO applet.SlimMenus - > SlimMenusApplet.lua:502 _menuSink(30) SlimServer {mysqueezebox.com} > menuDirective: nil isCurrentServer:nil > Jan 1 01:27:10 squeezeplay: INFO squeezeplay - JiveMain.lua:445 > Calling postOnScreenInits callback > Jan 1 01:27:10 squeezeplay: INFO squeezeplay - JiveMain.lua:445 > Calling postOnScreenInits callback > Jan 1 01:27:13 squeezeplay: INFO applet.SetupLanguage - > SetupLanguageApplet.lua:216 Locale choice set to EN > Jan 1 01:27:13 squeezeplay: INFO applet.SetupWelcome - > SetupWelcomeApplet.lua:166 step3 > Jan 1 01:27:16 squeezeplay: ERROR squeezeplay.task - Task.lua:75 > task error halfDuplexBugVerification: > ...ve/applets/SetupNetworking/SetupNetworkingApplet.lua:378: attempt > to index local 'iface' (a nil value) > Jan 1 01:27:16 squeezeplay: stack traceback: > Jan 1 01:27:16 squeezeplay: /usr/share/jive/jive/ui/Task.lua:75: in > function 'resume' > Jan 1 01:27:16 squeezeplay: > /usr/share/jive/jive/ui/Framework.lua:317: in function 'eventLoop' > Jan 1 01:27:16 squeezeplay: /usr/share/jive/jive/JiveMain.lua:422: > in function > Jan 1 01:27:16 squeezeplay: (tail call): ? > Jan 1 01:27:16 squeezeplay: /usr/share/jive/jive/JiveMain.lua:638: > in main chunk > Jan 1 01:27:16 squeezeplay: [C 0x615b9]: ? > Jan 1 01:27:16 squeezeplay: [C 0x29fec]: ? > Jan 1 01:27:36 login[777]: root login on 'tty3' > Jan 1 01:27:40 slimserver.pl: [70-01-01 01:27:40.6604] main::init > (354) Starting Logitech Media Server (v7.7.3, 1+7.7.3, Wed Feb 19 > 05:16:22 PST 2014) perl 5.01 > Jan 1 01:27:52 slimserver.pl: [70-01-01 01:27:52.3474] > Slim::Utils::SQLiteHelper::postConnect (359) Optimizing DB because of > missing or empty sqlite_stat1 table > Jan 1 01:27:58 slimserver.pl: [70-01-01 01:27:58.0279] > Slim::Utils::Misc::getAudioDir (663) Error: getAudioDir is deprecated, > use getAudioDirs instead > Jan 1 01:27:58 slimserver.pl: [70-01-01 01:27:58.0402] > Slim::Utils::Misc::getAudioDir (663) Backtrace: frame 0: > Slim::Utils::Log::logBacktrace (/usr/squeezecenter/Slim/Utils/Misc.pm > line 663)frame 1: Slim::Utils::Misc::getAudioDir > (/usr/squeezecenter/Slim/Utils/AutoRescan.pm line 38)frame 2: > Slim::Utils::AutoRescan::init (/usr/squeezecenter/slimserver.pl line > 583)frame 3: main::init (/usr/squeezecenter/slimserver.pl line > 643)frame 4: main::main (/usr/squeezecenter/slimserver.pl line > 1158) > Jan 1 01:27:58 slimserver.pl: [70-01-01 01:27:58.5026] > Slim::Utils::Scanner::Local::rescan (171) Discovering audio files in > /media/mmcblk0p1 > Jan 1 01:27:58 slimserver.pl: [70-01-01 01:27:58.7578] > Slim::Utils::Scanner::Local::__ANON__ (254) Removing d
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
I updated my post in the meantime. Here is the delta-information. I'm known not to see edits, as I follow the forum via mailing list... I did a DNS-check with "nslookup www.tsr.ch" which perfectly works. As would "ping www.google.com", I guess? Finally doing an "nslookup mysqueezebox.com" gives 6 IP addresses back. what about fab4.squeezenetwork.com? Which other IP-parameters should be checked from within the SBT? Not directly IP related. But anything interesting in /var/log/messages, in particular towards the end of the file? Is there any script that can be edited in order to directly go to the home screen upon booting? There certainly is, but I don't know where yet... How comfortable are you navigating and editing in the console using vi? You could dig around /etc/squeezeplay/userpath/settings to see what is there. -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
mherger wrote: > > Many thanks. In the SBT, I never made changes to the IP settings > > (IP-address, DNS, default GW all over DHCP). In the router , I tried > the > > following (Default GW is always the address of the router itself): > > Would you even get a prompt to manually configure the IP settings on the > > touch? > > > - DHCP activated, DNS left set to "Automatic" in the router (Swisscom > > Have you used this router for a while? Has there been an update > recently? > > > USB-Keyboard: Great Idea! By typing *Alt-F3* gives a terminal ;););) > on > > which I can login as root (default PW: 1234). And which accepts > > "ifconfig"... but where is the "|" located on the US-Kbd.-layout in > > Shift-7? > > Is the network connection set up correctly? Can you ping eg. > google.com? > > > order to type "ifconfig | less" so that it is possible to read the > > details (any hints on how to to get these otherwise)? > > No need for less. There shouldn't bee too many interfaces? > > > P.S. I also have an SD-card inserted with the former release > (fab4.bin), > > how could I initiate the FW-downgrade on the command line? > > Don't remember right now. > > -- > > Michael Hi Michael I updated my post in the meantime. Here is the delta-information. I did a DNS-check with "nslookup www.tsr.ch" which perfectly works. Finally doing an "nslookup mysqueezebox.com" gives 6 IP addresses back. Which other IP-parameters should be checked from within the SBT? I am convinced the IP could be edited via the Terminal. What should they be? Which networking variables/locations should I check? Is there any script that can be edited in order to directly go to the home screen upon booting? P.S. I can see the file fab4.bin at /media/mmcblk0p1/ on the inserted SD-card. Kind regards SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
Many thanks. In the SBT, I never made changes to the IP settings (IP-address, DNS, default GW all over DHCP). In the router , I tried the following (Default GW is always the address of the router itself): Would you even get a prompt to manually configure the IP settings on the touch? - DHCP activated, DNS left set to "Automatic" in the router (Swisscom Have you used this router for a while? Has there been an update recently? USB-Keyboard: Great Idea! By typing *Alt-F3* gives a terminal ;););) on which I can login as root (default PW: 1234). And which accepts "ifconfig"... but where is the "|" located on the US-Kbd.-layout in Shift-7? Is the network connection set up correctly? Can you ping eg. google.com? order to type "ifconfig | less" so that it is possible to read the details (any hints on how to to get these otherwise)? No need for less. There shouldn't bee too many interfaces? P.S. I also have an SD-card inserted with the former release (fab4.bin), how could I initiate the FW-downgrade on the command line? Don't remember right now. -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
mherger wrote: > > => Is there any way to get over this endless Ethernet Connection > > I'm pretty sure there is. But don't know yet how. > > Could you please double-check that the IP configuration sent to your > DHCP clients would be correct? In particular DNS and gateway settings > are obviously crucial. > > Did you try manually configuring IP on the Touch? > > > checking? Is there any hidden serial port or JTAG (eventually to be > > soldered) on the board to access the device and to force the home > screen > > to appear? > > Not 100% sure, but rather positive. I personally do have a unit with > serial connections soldered on (but haven't used it in years). I'm not > sure though whether the port was part of the production units. > > I think You should also be able to hook up a USB keyboard, then hit > ctrl-alt-f2 to switch to a terminal. > > -- > > Michael Hi Michael Many thanks. In the SBT, I never made changes to the IP settings (IP-address, DNS, default GW all over DHCP). In the router , I tried the following (Default GW is always the address of the router itself): - DHCP activated, DNS left set to "Automatic" in the router (Swisscom Box) i.e., both DNS servers are set to Swisscom default DNS (no success) - DHCP activated, DNS manually set to Google DNS 8.8.8.8 and 4.4.4.4 (no success) - USB-Keyboard: Great Idea! By typing *Alt-F3* gives a terminal ;););) on which I can login as root (default PW: 1234). And which accepts "ifconfig"... but where is the "|" located on the US-Kbd.-layout in order to type "ifconfig | less" so that it is possible to read the details (any hints on how to to get these otherwise)? P.S. I also have an SD-card inserted with the former release (fab4.bin), how could I initiate the FW-downgrade on the command line? Kind regards SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
=> Is there any way to get over this endless Ethernet Connection I'm pretty sure there is. But don't know yet how. Could you please double-check that the IP configuration sent to your DHCP clients would be correct? In particular DNS and gateway settings are obviously crucial. Did you try manually configuring IP on the Touch? checking? Is there any hidden serial port or JTAG (eventually to be soldered) on the board to access the device and to force the home screen to appear? Not 100% sure, but rather positive. I personally do have a unit with serial connections soldered on (but haven't used it in years). I'm not sure though whether the port was part of the production units. I think You should also be able to hook up a USB keyboard, then hit ctrl-alt-f2 to switch to a terminal. -- Michael ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
SqueezedUser wrote: > Hello slartibartfast, yes, I did precisely follow all the hints and > links posted in the above thread with no success (I omitted mentioning > it). > > Is it then so that we never more should do any factory reset with the > latest releases unless getting a useless (although still running and > pingable) device:confused:? > > > Kind regardsI hope not. Hopefully @mherger will see this. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
slartibartfast wrote: > This sounds very like the issue in this thread. > https://r.tapatalk.com/shareLink/topic?url=https%3A%2F%2Fforums%2Eslimdevices%2Ecom%2Fshowthread%2Ephp%3Ft%3D112228&share_tid=112228&share_fid=813&share_type=t&link_source=app > > Sent from my Pixel 3a using Tapatalk Hello slartibartfast, yes, I did precisely follow all the hints and links posted in the above thread with no success (I omitted mentioning it). Is it then so that we never more should do any factory reset with the latest releases unless getting a useless (although still running and pingable) device:confused:? Kind regards SqueezedUser's Profile: http://forums.slimdevices.com/member.php?userid=70247 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Squeezebox Touch in Endless "Verify Ethernet Connection" Loop After Factory Reset
SqueezedUser wrote: > Hello Community, > > After a factory reset of one of my Squeezeboxes Touch it is impossible > to get the home screen back after the language selection and then an > endless "Verify Ethernet Connection" hourglass running... > > *Squeezebox Touch Connectivity Details*: > > > > - Firmware 7.8.0 r16754 (running since a long time) - Hardware Version 5 - Switched Power Supply from other Squeezebox (OK) - Ethernet Only connection directly to the Internet Box router > (fibre router) - DHCP is active in the router (and the SBT gets one and is pingable > on that address) - No MAC-Filter in the router - No Firewall in the router - Ports 9000 and 3483 are fed through (other Squeezebox Touch and > Squeezebox Radio are still running fine) - All the Squeezeboxes are directly connected to mysqueezebox.com - mysqueezebox.com (52.31.254.173 and 34.247.45.207) are reached > normally by the other Squeezeboxes - > > > > > *Problem*: > Upon power on, reset, factory-reset again with or without "+"-button > or volume-up-button or "home"-button pressed on the remote control at > the same time, the Squeezebox Touch gets to the language screen and > then remains in the Ethernet Connectivity Check "Verifying the > Ethernet Connection" forever... > > *Observations*: > > > - The problematic Squeezebox Touch gets its local IP-address and can > be pinged. Of course, it refuses any SSH-connection since it has > been factory reset and cannot be configured because of the home > screen not willing to appear... - I noticed exactly the same behavior with a FAT-formatted SD-card > inserted with a former fab4.bin firmware (downloaded from > slimdevices) on it (at top-level), hoping it would be detected and > asked for an optional downgrade... BTW, on inserting the SD-card > after powered on, the latter is recognized and the Squeezebox Touch > Server menu appears (no way to proceed to a firmware-modification > however). Thereafter the endless Verify Ethernet Connection is back > forever... Apparently no way to get the home screen in order to > manually configure the SBT! - > > > > > *Question*: > => Is there any way to get over this endless Ethernet Connection > checking? Is there any hidden serial port or JTAG (eventually to be > soldered) on the board to access the device and to force the home > screen to appear? > > > > Many thanks for your help > > Kind regardsThis sounds very like the issue in this thread. https://r.tapatalk.com/shareLink/topic?url=https%3A%2F%2Fforums%2Eslimdevices%2Ecom%2Fshowthread%2Ephp%3Ft%3D112228&share_tid=112228&share_fid=813&share_type=t&link_source=app Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch