Re: [AFMUG] ePMP vs Ubiquiti AC

They're the latest products from both companies is the only reason I offered up the comparison. On Friday, May 15, 2015, Faisal Imtiaz wrote: > Am I the only one reading this discussion and shaking my head. > > The comparison of these two is absurd and ridiculous... it reminds me of > the di

Re: [AFMUG] GPS across towers/subnet?

The epmp AP has a built in gps receiver. You just install a small puck antenna. Ursprüngliche Nachricht Von: Cameron Camp Datum: 16.05.2015 06:54 (GMT+01:00) An: af@afmug.com Betreff: [AFMUG] GPS across towers/subnet? On the epmp GPS AP how many other radios can use its G

Re: [AFMUG] GPS across towers/subnet?

It's not ethernet/network based. And ePMP is not Canopy. There is no sync output/sharing from the radio(s). The AP just receives the sync pulse from its on-board GPS or from a power interrupted source like a CMM, CTM, SyncInjector, etc. On 5/15/2015 11:54 PM, Cameron Camp wrote: On the epmp G

Re: [AFMUG] ePMP vs Ubiquiti AC

We use a lot of mikrotik and suffer from their unwilling to invest in wireless development. They make their .ac cards barely working but they don't perform as nv2 does not work well. It is boring to get calls from customers with speed test showing 6mbit while connected to a lightly used .ac sect

[AFMUG] GPS across towers/subnet?

On the epmp GPS AP how many other radios can use its GPS for sync, and would that just be on the same tower, or across more other nodes on the same subnet or what’s the limitation? Thanks

Re: [AFMUG] ePMP vs Ubiquiti AC

When it costs $1200/year per antenna on a tower, I would argue that the cost of the equipment is not the issue. bp On 5/15/2015 7:22 PM, Jeremy wrote: Perhaps, but at 1000x the cost. On Fri, May 15, 2015 at 8:21 PM, Adam Moffett > wrote: I'd suggest with car

Re: [AFMUG] ePMP vs Ubiquiti AC

There are some notable differences that proxim and deliberant and mikrotik for that matter don't have: [1] TDMA offloaded onto a co-processor [2] AirPrism [3] Realtime Spectrum Analysis [4] Very deep pockets for R&D What will be interesting to see is how well mimosa stacks up without the filte

Re: [AFMUG] ePMP vs Ubiquiti AC

I also would shake had when ubnt did gps with their .ac. With a full blown tower they do not get qam256 and they can't reuse spectrum. So you end up with half the tower capacity. With free spectrum the .ac will show it's performance.  I would like to get mimosa ptmp into my hands. It is a copy of

Re: [AFMUG] ePMP vs Ubiquiti AC

Proxim. Deliberant also just released one. Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 08:18 PM, Faisal Imtiaz wrote: Am I the only one reading this discussion and shaking my head. The comparison of these two is absurd and ridiculous... it reminds me of the discussion

Re: [AFMUG] google domains?

apparently you can do a ton of dynamic entries too, thats pretty cool On Fri, May 15, 2015 at 8:50 PM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote: > any issues with using google domains to register and manage a domain name? > > -- > If you only see yourself as part of the team but y

Re: [AFMUG] ePMP vs Ubiquiti AC

Am I the only one reading this discussion and shaking my head. The comparison of these two is absurd and ridiculous... it reminds me of the discussion of this exact nature when Ubiquiti M products were first available in the market place and folks had conversation very similar Ubiquiti M (

Re: [AFMUG] ePMP vs Ubiquiti AC

I’m waiting for airHoleTM with patent pending wormhole technology. From: Jason McKemie Sent: Friday, May 15, 2015 10:50 PM To: af@afmug.com Subject: Re: [AFMUG] ePMP vs Ubiquiti AC Yeah, I overlooked the co-channel part... On Friday, May 15, 2015, Mike Hammett wrote: No, airPrism is useles

Re: [AFMUG] ePMP vs Ubiquiti AC

Hi Jeremy, A bit off topic, but can you ssh into a hand full of your Rocket M's, and do a dmesg and see if you get something like this... ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 9) Regards Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 30

Re: [AFMUG] ePMP vs Ubiquiti AC

Yeah, I overlooked the co-channel part... On Friday, May 15, 2015, Mike Hammett wrote: > No, airPrism is useless for co-channel. It's good for adjacent channel. > > > > - > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > -- > *From: *"Ja

Re: [AFMUG] Jacob too?!

Azotel had alot of financials features On Fri, May 15, 2015 at 9:15 PM, Paul McCall wrote: > Azotel still looks pretty good... maybe not have every feature that PC > has, but is solid, solid, and their team hasn't wavered for the 3 years we > have had them > > Paul > > -Original Message

[AFMUG] Whoa! SAF presents 11GHz Integra radio platform

Visit www.saftehnika.com View it in your browser

Re: [AFMUG] ePMP vs Ubiquiti AC

I'm an employee as opposed to an owner. In that sense I have $0 invested in anything. So it's spoken by someone who formerly worked with PMP100 and PMP450 and wishes the equipment he was working with today did like half the things that Canopy did. Spoken by someone with apparently a huge inv

Re: [AFMUG] ePMP vs Ubiquiti AC

Which is where ePMP comes in. you get reasonable cost and sync... which makes good spectrum management a lot easier. On Fri, May 15, 2015 at 9:22 PM, Jeremy wrote: > Perhaps, but at 1000x the cost. > > On Fri, May 15, 2015 at 8:21 PM, Adam Moffett wrote: > >> I'd suggest with careful spectrum

Re: [AFMUG] ePMP vs Ubiquiti AC

Or put another way...if he's using better equipment but doesn't know how to use it, then you'll still win. I have 22 towers with over a hundred UBNT APs in a valley 11 miles wide, built over the top of a synced Canopy network. I take about 10 customers a week off of their 450 platform and we

Re: [AFMUG] ePMP vs Ubiquiti AC

Hey...now you're picking on Telrad :) I thought this was about Canopy. Perhaps, but at 1000x the cost. On Fri, May 15, 2015 at 8:21 PM, Adam Moffett > wrote: I'd suggest with careful spectrum management, proper loading, AND better equipment you'd still be b

Re: [AFMUG] ePMP vs Ubiquiti AC

Perhaps, but at 1000x the cost. On Fri, May 15, 2015 at 8:21 PM, Adam Moffett wrote: > I'd suggest with careful spectrum management, proper loading, AND better > equipment you'd still be better off. > > I have 22 towers with over a hundred UBNT APs in a valley 11 miles wide, > built over the t

Re: [AFMUG] ePMP vs Ubiquiti AC

I'd suggest with careful spectrum management, proper loading, AND better equipment you'd still be better off. I have 22 towers with over a hundred UBNT APs in a valley 11 miles wide, built over the top of a synced Canopy network. I take about 10 customers a week off of their 450 platform and

[AFMUG] Fwd: The Future of Powercode

Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: "Powercode" Date: May 15, 2015 9:47 PM Subject: The Future of Powercode To: "Josh Luthman" Cc: ​​ The Future of Powercode We at Powercode are committed

Re: [AFMUG] ePMP vs Ubiquiti AC

I have 22 towers with over a hundred UBNT APs in a valley 11 miles wide, built over the top of a synced Canopy network. I take about 10 customers a week off of their 450 platform and we are constantly told that the difference is night and day better on our network. Careful spectrum management and

Re: [AFMUG] [WISPA Members] Powercode

I dont know, family made me get some icky jim jones vibe. I wonder if Simon actually went to guyana On Fri, May 15, 2015 at 9:04 PM, CBB - Jay Fuller wrote: > you know, the font used in that email was really prettymade me feel > sort of "high class..." > > > - Original Message - > *

Re: [AFMUG] ePMP vs Ubiquiti AC

I don't know whether there's a significant advantage to PMP over ePMP for residential applictions (since I've never used PMP450), but knowing what is possible with ePMP and UBNT, I don't see how PMP could ever generate enough additional revenue to pay for itself in our market. On Fri, May 15, 2015

Re: [AFMUG] Jacob too?!

Azotel still looks pretty good... maybe not have every feature that PC has, but is solid, solid, and their team hasn't wavered for the 3 years we have had them Paul -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini Sent: Friday, May 15, 2015 12:28 PM

Re: [AFMUG] ePMP vs Ubiquiti AC

No, we can't always control that, but if I can at least control it sometimes, I'll take it. On Fri, May 15, 2015 at 8:48 PM, Josh Reynolds wrote: > And you have the opinion you can control that, constantly, on unlicensed > spectrum? > > *smirk* > > Josh Reynolds > CIO, SPITwSPOTSwww.spitwspots.

Re: [AFMUG] ePMP vs Ubiquiti AC

Spoken by someone with apparently a huge investment in PMP? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Adam Moffett" To: af@afmug.com Sent: Friday, May 15, 2015 9:04:02 PM Subject: Re: [AFMUG] ePMP vs Ubiquiti AC Ma

Re: [AFMUG] ePMP vs Ubiquiti AC

I don't consider there to be a significant advantage to PMP over the ePMP for residential applications. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Adam Moffett" To: af@afmug.com Sent: Friday, May 15, 2015 8:41:03 PM S

Re: [AFMUG] ePMP vs Ubiquiti AC

Well, since half of your APs would be on the same rx freq :P Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 06:04 PM, Adam Moffett wrote: Maybe we should each drop an AF5 in front of the other and see who's worse off. I'll race you to the top of the bottom. It's true that

Re: [AFMUG] ePMP vs Ubiquiti AC

No, airPrism is useless for co-channel. It's good for adjacent channel. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Jason McKemie" To: af@afmug.com Sent: Friday, May 15, 2015 8:22:10 PM Subject: Re: [AFMUG] ePMP vs Ubiq

Re: [AFMUG] ePMP vs Ubiquiti AC

Hell I don't need an AF5x to cleanly knock many 5 Ghz radios off the air with a low power video transmitter. I also have a 5Ghz 1 watt amp someone sent me to test. ..it works..so combination is scary. No one has upset me yet.lol. Jaime Solorza On May 15, 2015 7:57 PM, "Josh Reynolds" wrote

Re: [AFMUG] [WISPA Members] Powercode

you know, the font used in that email was really prettymade me feel sort of "high class..." - Original Message - From: That One Guy /sarcasm To: af@afmug.com Sent: Friday, May 15, 2015 8:52 PM Subject: Re: [AFMUG] [WISPA Members] Powercode Who the hell is Alexander?

Re: [AFMUG] ePMP vs Ubiquiti AC

Maybe we should each drop an AF5 in front of the other and see who's worse off. I'll race you to the top of the bottom. It's true that nobody can ensure perfect packet loss and jitter under terrible conditions. The wifi junk is still junk when conditions are perfect. See the rest of the item

Re: [AFMUG] [WISPA Members] Powercode

i think he was a king... - Original Message - From: That One Guy /sarcasm To: af@afmug.com Sent: Friday, May 15, 2015 8:52 PM Subject: Re: [AFMUG] [WISPA Members] Powercode Who the hell is Alexander? On Fri, May 15, 2015 at 12:04 PM, CBB - Jay Fuller wrote: we

Re: [AFMUG] ePMP vs Ubiquiti AC

Can I drop an AF5 in front of your tower? I promise that your control over packet loss and jitter will go out the fucking window :P Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 05:56 PM, Adam Moffett wrote: We will both laugh ourselves to sleep tonight. Each fully knowing th

Re: [AFMUG] [WISPA Members] Powercode

I don't know but his email made me feel all warm and fuzzy. It is reassuring that they have a plan, and that plan involves hiring people and developing a roadmap. On Fri, May 15, 2015 at 7:52 PM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote: > Who the hell is Alexander? > > On Fri, M

Re: [AFMUG] ePMP vs Ubiquiti AC

We will both laugh ourselves to sleep tonight. Each fully knowing that the other is doing it wrong :) And you have the opinion you can control that, constantly, on unlicensed spectrum? *smirk* Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 05:46 PM, Mathew Howard wrote: That'

Re: [AFMUG] [WISPA Members] Powercode

Who the hell is Alexander? On Fri, May 15, 2015 at 12:04 PM, CBB - Jay Fuller < par...@cyberbroadband.net> wrote: > > well, while we're discussing powercode, the biggest / "only" issue we have > right now is google calendar intregration with our installers. last i read > on the forum, it was an

[AFMUG] google domains?

any issues with using google domains to register and manage a domain name? -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.

Re: [AFMUG] ePMP vs Ubiquiti AC

The various TDMA or other proprietary protocols generally handle the jitter and packet loss issues. I'm not as crazy about TDMA over Nstreme though. NV2 and Airmax both tend to lose packets and still show high % CCQ. It isn't noticeable over TCP, but I see it in UDP traffic. Shame MT can't get

Re: [AFMUG] ePMP vs Ubiquiti AC

And you have the opinion you can control that, constantly, on unlicensed spectrum? *smirk* Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 05:46 PM, Mathew Howard wrote: That's a very good point, regardless of what some customers seem to think, mbps really isn't the most import

Re: [AFMUG] ePMP vs Ubiquiti AC

That's a very good point, regardless of what some customers seem to think, mbps really isn't the most important thing... On Fri, May 15, 2015 at 8:41 PM, Adam Moffett wrote: > I've always considered mbps to be among the least important concerns on > PTMP, well below packet loss, jitter, QoS fea

Re: [AFMUG] ePMP vs Ubiquiti AC

I've always considered mbps to be among the least important concerns on PTMP, well below packet loss, jitter, QoS features, manageability, consistency, and reliability. Which is why I'm not super keen on *any* of the wifi stuff. This seems is like an argument about whether a Pinto is better t

Re: [AFMUG] ePMP vs Ubiquiti AC

Helps with adjacent channel like any other filter, not co-channel. Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 05:22 PM, Jason McKemie wrote: True, airprism is supposed to help with that, not sure how much it actually does, however. On Friday, May 15, 2015, Mike Hammett

Re: [AFMUG] ePMP vs Ubiquiti AC

True, airprism is supposed to help with that, not sure how much it actually does, however. On Friday, May 15, 2015, Mike Hammett wrote: > With only a few APs per tower because of co-channel interference... > > > > - > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > >

Re: [AFMUG] ePMP vs Ubiquiti AC

We do pretty well with ~14 APs at some sites on 5GHz, with shield kits and physical separation. Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com On 05/15/2015 05:00 PM, Mike Hammett wrote: With only a few APs per tower because of co-channel interference... - Mike Hammett Intelligent Com

Re: [AFMUG] Cambium question

117mbps and 65mbps with no fine alignment yet..not shabby Jaime Solorza On May 15, 2015 6:49 AM, "Jaime Solorza" wrote: > Not sure why they are not using Dragonwave. I dont know too much about > techs skills as far as path engineering but owner is not technical but good > at getting business.

Re: [AFMUG] ePMP vs Ubiquiti AC

With only a few APs per tower because of co-channel interference... - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Josh Reynolds" To: af@afmug.com Sent: Friday, May 15, 2015 7:59:14 PM Subject: Re: [AFMUG] ePMP vs Ubiquiti

Re: [AFMUG] ePMP vs Ubiquiti AC

Pfft, you don't need sync when you have all the spectrum of 5.1-5.4... oh wait. On May 15, 2015 7:56 PM, "SmarterBroadband" wrote: > But no sync. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Peter Kranz > *Sent:* Friday, May 15, 2015 3:12 PM > *To:* af@afmug.com > *Subject:* Re

Re: [AFMUG] ePMP vs Ubiquiti AC

One could say "I can sync but I can only get 60 Mbps per sub" (*) Another person could say "I can't sync but I can get 200+ Mbps per sub" (*) (*) under the right conditions Your market and deployment strats will dictate which is more important. Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com

Re: [AFMUG] ePMP vs Ubiquiti AC

But no sync. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Peter Kranz Sent: Friday, May 15, 2015 3:12 PM To: af@afmug.com Subject: Re: [AFMUG] ePMP vs Ubiquiti AC AC blows doors on ePMP Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 5

Re: [AFMUG] ePMP vs Ubiquiti AC

AC blows doors on ePMP Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jason McKemie Sent: Friday, May 15, 2015 11:21 AM To: af

Re: [AFMUG] Cisco 3945's For Sale - Large Lot

I don’t know which is more astounding, that you have 122 NIB 3945 routers to sell, or that you sold them in like an hour. From: Paul Stewart Sent: Friday, May 15, 2015 4:00 PM To: af@afmug.com Subject: Re: [AFMUG] Cisco 3945's For Sale - Large Lot Sold … thanks for your interest. Paul

Re: [AFMUG] Cisco 3945's For Sale - Large Lot

That was fast. On 5/15/2015 4:00 PM, Paul Stewart wrote: Sold … thanks for your interest. Paul *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Paul Stewart *Sent:* Friday, May 15, 2015 3:37 PM *To:* af@afmug.com *Subject:* [AFMUG] Cisco 3945's For Sale - Large Lot I have a large lot

[AFMUG] OT..ET warning

So working at well near Fort Bliss when we hear the Close Encounters of 4th Kind diddy over loud speakers. Twice then a voice. Too windy to discern. Seems like they are testing warning systems. It is going through zones. Kinda cool Jaime Solorza

Re: [AFMUG] Cisco 3945's For Sale - Large Lot

Sold . thanks for your interest. Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul Stewart Sent: Friday, May 15, 2015 3:37 PM To: af@afmug.com Subject: [AFMUG] Cisco 3945's For Sale - Large Lot I have a large lot of CISCO3945E/K9 routers for sale - all brand new. 122

[AFMUG] Equipment for Sale

Motorola/Cambium Used 2.4 6dB Stingers 21 2.4 SM's 2400SM 19 2450APP10 Connectorized 2 2.4 Test Adapter 1 Ubiquiti Bullet M2

Re: [AFMUG] 3.65 registration

867 5309 Jaime Solorza On May 15, 2015 9:23 AM, "Adam Moffett" wrote: > What's her number? > > On 5/15/2015 11:22 AM, That One Guy /sarcasm wrote: > > call her > > On Fri, May 15, 2015 at 10:19 AM, Adam Moffett > wrote: > >> I have a bunch of pending 3.65ghz site registrations. >> >> What's th

[AFMUG] Cisco 3945's For Sale - Large Lot

I have a large lot of CISCO3945E/K9 routers for sale - all brand new. 122 units - prefer to sell entire lot at once. Will let the lot go for $535,000 USD if anyone interested in buying all of them. I am sending this note out to several dozen contacts as well and anticipate them to sell fast.

Re: [AFMUG] ePMP vs Ubiquiti AC

I agree, when Q4 keeps turning into Q4 of some future year, it just doesn't matter anymore... I'm not going to buy anything based on what it might be able to do someday, I'm going to buy what does the job best as it is right now. I can see some cases where Ubiquiti AC may very well be a better cho

Re: [AFMUG] ePMP vs Ubiquiti AC

Agreed. I have no faith in "we'll have that feature in Q4" anymore. Yeah, any new product is dead to me until it has those bands. Coming in the future doesn’t cut it. Even if you intend to operate in upper 5 GHz, typically you need the flexibility to operate in 5150 and DFS for testing/comm

Re: [AFMUG] ePMP vs Ubiquiti AC

Yeah, any new product is dead to me until it has those bands. Coming in the future doesn’t cut it. Even if you intend to operate in upper 5 GHz, typically you need the flexibility to operate in 5150 and DFS for testing/commissioning/transitioning. And “trust me, it will be unlocked in future

Re: [AFMUG] ePMP vs Ubiquiti AC

I wonder when the firmware update is coming! On 5/15/2015 1:28 PM, Josh Reynolds wrote: 5150 On May 15, 2015 10:23:33 AM AKDT, Mike Hammett wrote: 5150 or DFS? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

Re: [AFMUG] ePMP vs Ubiquiti AC

5150 On May 15, 2015 10:23:33 AM AKDT, Mike Hammett wrote: >5150 or DFS? > > > > >- >Mike Hammett >Intelligent Computing Solutions >http://www.ics-il.com > >- Original Message - > >From: "Josh Reynolds" >To: af@afmug.com, "Jason McKemie" >Sent: Friday, May 15, 2015 1:23:02 PM

Re: [AFMUG] ePMP vs Ubiquiti AC

This is incorrect. In the past few weeks several products from UBNT have received their lower band certs. Check the FCC approvals by date. On May 15, 2015 10:22:33 AM AKDT, Mike Hammett wrote: >ePMP. UBNT hasn't proven themselves able to get DFS or 5150 >certification in their AirMax line for an

Re: [AFMUG] ePMP vs Ubiquiti AC

5150 or DFS? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Josh Reynolds" To: af@afmug.com, "Jason McKemie" Sent: Friday, May 15, 2015 1:23:02 PM Subject: Re: [AFMUG] ePMP vs Ubiquiti AC AC has been getting lower appro

Re: [AFMUG] ePMP vs Ubiquiti AC

AC has been getting lower approvals over the past few weeks, check the FCC approvals site. On May 15, 2015 10:20:55 AM AKDT, Jason McKemie wrote: >I know this isn't an apples to apples comparison, but what are other's >thoughts on these two products? I'm looking at 5GHz, and I know the AC >gea

Re: [AFMUG] ePMP vs Ubiquiti AC

ePMP. UBNT hasn't proven themselves able to get DFS or 5150 certification in their AirMax line for any new products in a while. Lots of throughput doesn't mean jack when there's no sync and no usable spectrum. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

[AFMUG] ePMP vs Ubiquiti AC

I know this isn't an apples to apples comparison, but what are other's thoughts on these two products? I'm looking at 5GHz, and I know the AC gear doesn't have the lower 5GHz bands - hopefully they will in the near future. -Jason

Re: [AFMUG] 3.65 registration

From the horse's mouth: That would be fine. You might want to add to that the caveat that whatever you register must be built out within 12 months. *From:*Adam Moffett [mailto:ad...@clarityconnect.com] *Sent:* Friday, May 15, 2015 1:35 PM *To:* John Lambert *Subject:* Re: Pending registration

Re: [AFMUG] [WISPA Members] Powercode

well, while we're discussing powercode, the biggest / "only" issue we have right now is google calendar intregration with our installers. last i read on the forum, it was an "outdated api" issue. is anyone working with powercode on this currently? thanks :) - Original Message -

[AFMUG] FOR SALE

I have a number of items that nobody ever came and got. What I list is brand new in the box unless I mention different. UBNT AF24 link complete ePMP 5G SM - 3 boxes of 20 each ePMP 5G AP - Maybe 6 each MT - RB2011iL-RM 2 EA - RB2011UiAS-IN Planet switches - - IGS-10020HPT - 5EA

Re: [AFMUG] 3.65 registration

I registered some sites the week before the cutoff that we actually have built out since... normally I wouldn't have done it until after it was installed, like a normal person. Fortunately, I had finally gotten around to making sure all of our existing sites were registered properly a few weeks bef

Re: [AFMUG] Dropping Chinese & Korean IP's in Mikrotik

I finally got a list from the cable guy. He says the SMC 3000 series, the Cisco 3825, Netgear 3000, basically all DOCSIS 3.0 with routers built it. From: Paul Stewart Sent: Tuesday, May 12, 2015 6:33 AM To: af@afmug.com Subject: Re: [AFMUG] Dropping Chinese & Korean IP's in Mikrotik I was ch

Re: [AFMUG] Jacob too?!

So there goes my migration plan... Gino A. Villarini @gvillarini > On May 15, 2015, at 11:32 AM, WaveDirect wrote: > > Well I heard they were gearing up for bigger things. The reasons for them > leaving were private and really don't matter as far as the product is > concerned. They both we

Re: [AFMUG] 3.65 registration

3) We have a contract with the state *requiring* us to build a bunch of sites this summer. I registered them all a few months early because of the uncertainty of what would happen after 4/17. On 5/15/2015 12:09 PM, Ken Hohhof wrote: I submitted like 5 of them on 4/13, all still pending. We

Re: [AFMUG] 3.65 registration

I submitted like 5 of them on 4/13, all still pending. We have installed a few more subs since then, I have not bothered submitting them since I'm unclear if the FCC even wants us to continue doing that or will ever process the applications. As far as the flood of applications in the week bef

[AFMUG] Check out the latest on ePMP

By attending a free ePMP Tour event at a location near you. http://bit.ly/1s8g9n4 Cities include: Fort Wayne Kansas City Tucson Minneapolis Amarillo Dayton St Louis Billings El Paso Grand Rapids Orlando Montreal Medford Join the Conversation Cambium Networks Community Forum

Re: [AFMUG] 3.65 registration

Has anything registered after 4/17 been approved? as far as I can tell, they're all still sitting pending... I don't think the FCC even knows what we're supposed to be doing at this point. It does appear that they aren't granting anymore nationwide NN licenses - and I don't see any reason to think

Re: [AFMUG] 3.65 registration

These were all submitted the week prior to April 17th. I heard there were a lot of registrations that week. On 5/15/2015 11:39 AM, Ken Hohhof wrote: Related question: do they even want us to register sites after April 17? I read the R&O and I'm still unclear on that. I think Steve Coran's

Re: [AFMUG] 3.65 registration

my brain just fell out of my eye On Fri, May 15, 2015 at 10:41 AM, David wrote: > I wonder if it has to do with the new rule changes coming for 3.55-3.8 ? > > > On 05/15/2015 10:28 AM, Adam Moffett wrote: > > Thank you Steve. > > On 5/15/2015 11:23 AM, That One Guy /sarcasm wrote: > > Cheryl B

Re: [AFMUG] 3.65 registration

I wonder if it has to do with the new rule changes coming for 3.55-3.8 ? On 05/15/2015 10:28 AM, Adam Moffett wrote: Thank you Steve. On 5/15/2015 11:23 AM, That One Guy /sarcasm wrote: Cheryl Black Program Analyst Federal Communications Commission Wireless Telecommunications Bureau Broadban

Re: [AFMUG] Voltage\Amperage on Shielded Cable

Im not sayin anyone is anything but On 05/14/2015 11:37 AM, Mathew Howard wrote: Are you saying Steve is a Coyote? ...that could explain some things :P On Thu, May 14, 2015 at 7:14 AM, David Milholen > wrote: Coyote PEE does wonders LOL On 5/13/201

Re: [AFMUG] 3.65 registration

Related question: do they even want us to register sites after April 17? I read the R&O and I'm still unclear on that. I think Steve Coran's summary on the WISPA list said something along the lines of operators MAY continue to register locations after April 17, but they will not be grandfathe

Re: [AFMUG] 3.65 registration

Thank you Steve. On 5/15/2015 11:23 AM, That One Guy /sarcasm wrote: Cheryl Black Program Analyst Federal Communications Commission Wireless Telecommunications Bureau Broadband Division Telephone: 717-338-2617 Email: cheryl.bl...@fcc.gov On Fri, May 15, 2015 at

Re: [AFMUG] Jacob too?!

Well I heard they were gearing up for bigger things. The reasons for them leaving were private and really don't matter as far as the product is concerned. They both were there for a while so maybe a change in life is good for them both. Powercode is in a pretty good state at the moment but I j

Re: [AFMUG] Jacob too?!

The good thing about it is there wont be any safe major updates for a while so everybody can focus on their summer projects, but with these two gone, there is no way the company vision wont change. With simon there it had become a beautiful usercentric product. On Fri, May 15, 2015 at 10:15 AM, Wa

Re: [AFMUG] Jacob too?!

This explains why I've had no tickets responded to. Three phone calls, spoke with some new lady, I've had one email response saying they couldn't do what I wanted. I'm becoming very concerned about my investment of time and money in Powercode. On 5/15/2015 11:15 AM, WaveDirect wrote: Yes t

Re: [AFMUG] 3.65 registration

call her On Fri, May 15, 2015 at 10:19 AM, Adam Moffett wrote: > I have a bunch of pending 3.65ghz site registrations. > > What's the best way to find out what the hold up is? > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already

[AFMUG] 3.65 registration

I have a bunch of pending 3.65ghz site registrations. What's the best way to find out what the hold up is?

Re: [AFMUG] 3.65 registration

Cheryl Black Program Analyst Federal Communications Commission Wireless Telecommunications Bureau Broadband Division Telephone: 717-338-2617 Email: cheryl.bl...@fcc.gov On Fri, May 15, 2015 at 10:22 AM, Adam Moffett wrote: > What's her number? > > On 5/15/2015 11:22 AM, That One Guy /sarc

Re: [AFMUG] 3.65 registration

What's her number? On 5/15/2015 11:22 AM, That One Guy /sarcasm wrote: call her On Fri, May 15, 2015 at 10:19 AM, Adam Moffett > wrote: I have a bunch of pending 3.65ghz site registrations. What's the best way to find out what the hold up is? -- If you

Re: [AFMUG] Jacob too?!

Wow. I can't imagine that anything good will come of this. On May 15, 2015 9:15 AM, "WaveDirect" wrote: > Yes the culling has begun... > > Not happy. > > - Original Message - > From: "Gino Villarini" > To: af@afmug.com > Sent: Friday, May 15, 2015 10:28:10 AM > Subject: Re: [AFMUG] Jaco

Re: [AFMUG] ePMP non Synced working good as AP

I just can't imagine you wouldn't just buy the synced for the price difference. On Fri, May 15, 2015 at 10:13 AM, Mathew Howard wrote: > I could be wrong, but I was under the impression that they were the same > CPU. > > A quick google came up with this from the Cambium forums: > > epmp1000 Syn

Re: [AFMUG] FOR SALE??

Yes and remember it is 9 o clock somewhere... From: Lewis Bergman Sent: Friday, May 15, 2015 9:15 AM To: af@afmug.com Subject: [AFMUG] FOR SALE?? Can we still post stuff on Friday morning?

Re: [AFMUG] Jacob too?!

Yes the culling has begun... Not happy. - Original Message - From: "Gino Villarini" To: af@afmug.com Sent: Friday, May 15, 2015 10:28:10 AM Subject: Re: [AFMUG] Jacob too?! Say aint so? From: CBB Fuller mailto:par...@cyberbroadband.net>> Reply-To: "af@afmug.com"

[AFMUG] FOR SALE??

Can we still post stuff on Friday morning?

Re: [AFMUG] Jacob too?!

straight off the forum, apparently. - Original Message - From: Chuck McCown To: af@afmug.com Sent: Friday, May 15, 2015 8:53 AM Subject: Re: [AFMUG] Jacob too?! Is this breaking news? From: Josh Luthman Sent: Friday, May 15, 2015 7:51 AM To: af@afmug.com Subjec

  1   2   >