This is not a "easy sat" dx like AO-40 (sobsob)
73 Bob W7LRD
- Original Message -
From: "Paul Stoetzer"
To: amsat-bb@amsat.org
Sent: Monday, August 11, 2014 1:19:50 PM
Subject: Re: [amsat-bb] Ham radio goes around the Moon
Wait for this one. It'll be
What if it there was a transponder in it? Ahhh the mind wanders
73 Bob W7LRD
- Original Message -
From: "M5AKA"
To: "AMSAT BB"
Sent: Monday, August 11, 2014 12:44:24 PM
Subject: [amsat-bb] Ham radio goes around the Moon
The lunar flyby with a ham radio payloa
uote
Frank-K4FEG, "work 'em till the antennas vaporize". I would prefer a AO-40
(sobsob), until then I'll do what Frank suggests!
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an
nch of cleaver people and should develop a method
getting the necessary funds for launches. Everything is now "bottom line"
driven. We should "just do it".
73 Bob W7LRD
Seattle
- Original Message -
From: "Paul Stoetzer"
To: "Phil Karn"
r so small opportunity to
parts of N. Europe. Essentially, use a given frequency (downlink) only when the
satellite is less than 4-5 degrees. As I recall there was such a concept on
AO-40 (sobsob), it worked quite well. Your thoughts.
73 Bob W7LRD
__
what should we be calling AO73 in satpc32 sqf file ao-73 or funcube-1?
73 -the digitally challenged
Bob-W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur
Tim/all- I did a repair on my G5500 el rotor. I needed a position pot-it was
available through Yaesu parts right away. Depending on what you need to have
done, your mileage may vary. You could always ship the whole thing to Yaesu.
You can get lots of advice here on the bb.
73 Bob W7LRD
Thanks Glenn- I was on ssb when it just stopped. I did not know about this
forcing the mode change thing. So if too many station try to access the sat it
will just switch? I had a sked with G4DOL earlier today. Did not make it but
the satellite sounded good. Looking into JT65 EME.
73 Bob W7LRD
At 2231Z AO-7 downlink quit. In full sun, any ideas?
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http
he program. Station is peaked top
perfection, antennas tracking etc. Just trying work out these minor PITA bugs.
Your collective wisdom is invaluable
the digitally challanged
73 Bob W7LRD
a smart man knows his limitations
___
Sent via AMSAT-BB
would someone send me the the doppler sqf file for this bird
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings
Still attempting to make satpc32 work. Removed it from hard drive, downloaded
from Erics site, now get error 1925 not sufficient privileges etc etc. The
next sound you hear will be the computer flying out the window. Assistance
please.
from the digitally challanged
73 Bob W7LRD
something I am
doing/not doing?? Becoming a PITA to keep everything running.
from the digitally challenged
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur
I can not get it to run (satpc-32). Someone said it is because of a inactive
satellite in the list. Which one?? It will just keep happening. Also I am
looking for a backup sat program as satpc32 is unreliable. Recommendations??
73 Bob W7LRD
___
Sent
just updated keps now I get E/A-Fehler 105 marching across the screen and will
not stop. g
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur
trying AO-7 this AM-not on mode B or A?? op trouble??
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http
There are internal stops in the pot
which would make improper alignment to cause stripped gears. This is all
doable but requires very close attention to detail. Short of this you can
always just send the rotor to Yaesu. This was real PITA job.
73 Bob W7LR
I "think" I heard the beacon of AO-73 on the FO29 down link. Both satellites
were over lapping I have no idea how to figure the Doppler from two satellites
in conjunction. The signal stopped at FO-29 LOS. The time was 0055Z.
73 Bob W7L
I am getting Ungultige Gleitkommaoperation marching across the screen on
satpc32. I forget how to fix it.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the
hoping the collective knowledge
of this group has some good advice. I have the replacement pot, I could just
send the "basket case" rotor to Yaesu. I'd like to try to avoid that. As
always--thankyou
73 Bob W7LRD
___
Sent via AMS
be a issue
(maybe). The part number they sent is S8101823. If it hits the stops and
tries to keep turning something would give. Thoughts please.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT
anyone assist me in
getting this simple part?
73 Bob W7LRD .
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org
Thanks to the many for my el rotor problem. Took down, took apart-position pot
failure-I could (maybe) make it work but since I have everything down I may as
well replace it. Where's a good source for said pot?
73 Bob W7LRD
___
Sent via AMS
My G-5500 El. rotor will elevate but no/erratic indication on the control unit.
First guess pot in the rotor. Before tearing everything apart, I want to make
sure
73 Bob
W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
Hello Northern Europe-A good foot print into CN87 (Seattle, Wa.) at 1800Z. On
or about 145.950.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
putting satpc 32 v12.8c on another computer - get a old-fehler 8005403a error-
suggestions??
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
Kind of agree Bill-it is analogous to the older AO-7 on line log, where the qso
rate was tabulated. I'm sure none of us paid any attention to that. I think I
got up to the 7 or 8 position. We're competitive creatures.
73 Bob W7LRD
- Original Message -
From: "Bill Bo
got it figured out-thanks to all who helped
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org
found the tones in the sqf file, what exactly is the setup for a 910H for the
two tones?
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
using Satpc-32 under the CAT button should there be a line showing the tones
required? Trying confirm I have the two tones required.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join
thanks Pete, gotta have one
73 Bob W7LRD
- Original Message -
From: "W2JV"
To: AMSAT-BB@amsat.org
Sent: Tuesday, January 28, 2014 6:46:30 PM
Subject: [amsat-bb] Fox-1 Model
Hello,
I just completed building the AMSAT Fox-1 Cardboard Model Satellite, Scale 1:1,
it wa
#x27;s iPad2
>
>> On Jan 1, 2014, at 10:17 PM, Bob- W7LRD wrote:
>>
>> I lost track of the "switch over" on AO-7. Trying make a sked with the UK
>> later in Jan. Happy New year to all my satellite friends. Check out Jan. QST
>> page 20.
>> 73 Bo
I lost track of the "switch over" on AO-7. Trying make a sked with the UK later
in Jan. Happy New year to all my satellite friends. Check out Jan. QST page 20.
73 Bob W7LRD
CN87
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are th
" easy (most of the time). It seems there is always
a learning curve in front of me. If there weren't one provided I'd probably
create one. Nice to hear the usual culprits on AO-73.
73 Bob W7LRD
- Original Message -
From: "Andy Kellner"
To: amsat-bb@amsat.org
Se
where there is a concise
depository of information? Now it is just all over the place. I suppose I
should just focus on a few.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join n
when will AO-73 (funcube) keps be available for download from some fo the
selections in Satpc32? A download without those keps will erase the manual
installed ones.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
forward them to me to
Bob W7LRD
- Original Message -
From: "Peter Portanova"
To: AMSAT-BB@amsat.org
Sent: Friday, November 22, 2013 4:13:34 PM
Subject: [amsat-bb] KySat Dashboard
Hello,
It’s been some time that I linked my TNC to a dashboard output, and I honestly
check out your local hardware store, I found them there
73 Bob W7LRD
- Original Message -
From: "Floyd Rodgers"
To: amsat-bb@amsat.org
Sent: Thursday, November 21, 2013 6:18:38 PM
Subject: [amsat-bb] Yaesu G5500 rotor parts
Anyone know of a source for ball bearin
I have all data in the doppler.sqf file. Satpc32 reads the first file. How do I
get to read the second one for a single satellite. Example- I have the
transponder and the tlm in that order for funcube-1, Satpc32 shows the
transponder freq. how do I switch it to TLM?
73 Bob W7LRD
once again for the digitally challenged where is that simple "show and tell"
for manually entering keps into Satpc32?
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now
I have an issue
(operator error).
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
satellite was higher. This
was super for RS-15. I wrote an article for the journal years ago about it.
73 Bob W7LRD
- Original Message -
From: "John"
To: "Vince Fiscus, KB7ADL"
Cc: amsat-bb@amsat.org
Sent: Wednesday, November 6, 2013 8:15:22 AM
Subject: [amsa
I use a 4 element quad...HOWEVER.. it receives 29.45mhz better off the back as
the reflector acts as a director at that frequency, it is cut for much lower in
the band
73 Bob W7LRD
- Original Message -
From: "Kevin Deane"
To: amsat-bb@amsat.org
Sent: Tuesday, November 5,
just curious, what would the link budget look like for a lunar transponder?
73 Bob W7LRD
- Original Message -
From: "M5AKA"
To: "AMSAT BB"
Sent: Tuesday, November 5, 2013 2:14:20 AM
Subject: [amsat-bb] Lunar Mission Looking for Payloads
The drawback may be the
Do any of these cubesats have a useable transponder?
73 Bob W7LRD
- Original Message -
From: "M5AKA"
To: "AMSAT BB"
Sent: Monday, October 28, 2013 12:54:47 PM
Subject: [amsat-bb] Space News: CubeSats Need Coordination Too
Space News editorial - CubeSats N
Just saw the movie "Gravity" aside from a few gaffs (ISS & Hubble on same
orbit),and few others, a fun movie for space junkies. Saw the 3D, IMAX version.
Excellent scenery, I was waiting for SO-50 to float by.
73 Bob W7LRD
___
Sen
Any one looking for Hawaii? Just had a nice chat with Tom NH6Y on FO-29 his
grid BL10. No one on but he and I, he also operates AO-7
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join
shortly at 1831Z I will have a foot print to N. Eu. also a part of UK. from
Seattle Wa. CN87. On about 145950 max el. 5*
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to
LVB tracker..works great...AMSAT gets the money
73 Bob W7LRD
- Original Message -
From: "Les Rayburn"
To: "AMSAT Mailing List" , starcom...@star-com.net
Sent: Thursday, October 10, 2013 8:04:06 PM
Subject: [amsat-bb] Yaesu Rotor G5400B
Picked up a like new Yaes
I used a "tab matching" method taught to me by Joe, K0VTY. Just a strip of
copper following the first 90* of the helix. Adjust the distance to the wire
for min. SWR. This was for L band antennas. Miss L & S stuff on satellites,
and, you know.
73 Bob W7LRD
- Original Mess
that little frog kept thinking,"the difficult I can do immediately the
impossible may take a little longer"
- Original Message -
From: "Greg D"
To: amsat-bb@amsat.org
Sent: Saturday, September 21, 2013 12:48:00 PM
Subject: [amsat-bb] Re: Phase 3
Not to single out Michael on this, b
>From reading
>http://amsat-uk.org/2012/05/25/italian-microsat-to-deploy-six-amateur-radio-satellites/
> we seem to have lots of satellites. However, of these are there any with
>linear or fm transponders? I know it is a rehetorical question.
73 Bob W7LRD
- Original Messag
this one is a stretch.. 435.850 from CN87 max El. 2*
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http
Hello those in N. Eu. at 1817z I will be looking for you 145.950+/-
73 Bob W7LRD
CN87
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription
I never buy lottery tickets. However today at the grocery store I saw the
powerball up to $400M. I bought a couple thinking HEO.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now
Contrarily... I believe if we had more "hard" sats that would present more of a
challenge to many. If it were easy, everyone would be doing it. The difficult
we do immediately, the impossible takes a little longer!
73 Bob W7LRD
- Original Message -
From: "Kevin Muenzle
the difficult we do immediately, the impossible takes a little longer!
73 Bob W7LRD
- Original Message -
From: "Personal"
To: "John Becker"
Cc: amsat-bb@amsat.org
Sent: Tuesday, September 17, 2013 1:12:00 PM
Subject: [amsat-bb] Re: so long
How will we call yo
ditto!
Bob W7LRD
- Original Message -
From: "Les Rayburn"
To: "AMSAT Mailing List" , starcom...@star-com.net
Sent: Tuesday, September 17, 2013 9:37:17 AM
Subject: [amsat-bb] Great Morning for New Grids!
Drew, KO4MA was on from EM61/EM71 intersection this mornin
mong us if we want to conquer space.
I know I have too much time available
your daily chuckle
73 Bob W7LRD
- Original Message -
From: "Thomas Doyle"
To: "AMSAT"
Sent: Thursday, September 12, 2013 6:35:14 AM
Subject: [amsat-bb] Quite a ride for the little fellow
For those looking for Hawaii, look for NH6Y. Quite active on the birds.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription
When AO-51 used the S band downlink, I used a 18 inch TV dish with a 6 turn
helix feed connected to a AIDC 3731 (K5GNA) down converter. I do not know the
pointing accuracy as it was not used very much. On AO-40 (sobsob) I used a 4
foot primestar dish (heavy) with the same feed and dc.
73 Bob
them yes it'll happen again.
73 Bob W7LRD
- Original Message -
From: "Michael"
To: amsat-bb@amsat.org
Sent: Wednesday, September 4, 2013 2:25:08 PM
Subject: [amsat-bb] Re: A0 40 replacement
I'm almost fifty one years old and I'm now convinced that we will not
Hi John...the LIDS will never disappear..there are many more waiting in the
wings...the best we can do is to "politely" educate the alleged offenders,
usually via email.
73 Bob W7LRD
- Original Message -
From: "John - VE7JZ"
To: "Mat 62" , amsat-bb@amsa
almost all .22lr are unavailable, they're still hoarding them.
73 Bob W7LRD
- Original Message -
From: "Andrew Glasbrenner"
To: "Jeff Griffin" , AMSAT-BB@amsat.org
Sent: Sunday, September 1, 2013 6:41:06 PM
Subject: [amsat-bb] Re: Winterization project
I
In my situation I have a Dalmatian/Pointer who hates squirrels, or he thinks
they're lunch. Either way my squirrel situation is solved. A very effective
deterrent.
good luck
73 Bob W7LRD
- Original Message -
From: "Greg D"
To: "Amsat BB"
Sent: Sunday, Sep
Nice accomplishment John, glad to have been a small part of it. Now whatcha
gonna do? I am reminded, "if this were easy, everyone would be doing it".
73 Bob W7LRD
- Original Message -
From: "John Papay"
To: amsat-bb@amsat.org
Sent: Thursday, August 22, 2013
Where can I find grid square rules and requirements regarding grid square
boundaries
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program
- Forwarded Message -
From: wa7...@frontier.com
To: "Bob- W7LRD"
Sent: Thursday, August 15, 2013 8:07:16 PM
Subject: Re: Amsat BB
Yes, please copy and paste the following:
.
On Saturday, August 17th, the Snohomish County Hams Club and the Cascade Radio
Club will be par
rds, being somewhat digitally challanged.
If I ever do this again I will be better prepared, maybe leave the xyl, grand
daughter, and dogs at home. Check out CN76!
thank you and 73
Bob W7LRD/7
cn77
___
Sent via AMSAT-BB@amsat.org. Opinions expressed
I will be on the 0344Z FO29, then maybe SO50 at 0418.
73 Bob W7LRD/7
CN77
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings
with grand daughter.
Hopefully more to follow, will advise on the bb or via k4feg.
73 Bob W7LRD/7
CN77
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satelli
fo29 at 1728z I will be on from cn77
73 bob w7lrd
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman
those previously time were pst should be 1544Z & 1717Z
73 Bob W7LRD
CN77
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription sett
I will be on FO29 at 0858Z and 1027Z. The first pass is only 14* el. we'll see.
From Moclips Wa. (look it up)
73 Bob W7LRD/7
CN77
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to su
) however I do have
Franks (K4FEG) cell phone and he can advise those interested via the bb. If I
can get down to CN76 remains to be seen. It is just a speck of a grid square.
Linear birds- I will maintain my tx frequency and if too busy (qrm) will listen
+/- to speed up Q's.
73 Bob W7LRD
soon
this afternoon from
home, CN87.
73 Bob W7LRD
Seattle
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/ma
this afternoon from
home, CN87.
73 Bob W7LRD
Seattle
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/ma
you will have to use
that big knob for doppler and tracking. However they will do the job and you
will learn a lot.
73 Bob W7LRD
- Original Message -
From: "Oscar Ortega"
To: amsat-bb@amsat.org
Sent: Thursday, August 1, 2013 4:51:42 PM
Subject: [amsat-bb] Newbie needs a
Hello (again)...Is there a way (program) that one can predict when the apogee
of a given satellite will favor a given grid square? Specifically FO29 varies
from about 813 km to 1351km. One can potentially "stretch" the footprint when
it is at apogee.
73 Bob W7LRD
(sunn
uot; consistent. As always the collective thoughts of this bb are
never wrong.
73 Bob W7LRD
Seattle
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite progra
are any of the "downloadable" keps on FITSAT-1 into Satpc32. accurate? When I
download current keps the FITSAT-1 goes away from the folder where it was.
simply confused (again)
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions exp
nstallation is currently not wired for
switching and defaults to RHCP for up and down. I do not appear to have any
issues with AO-7, I do plan to connect up the switching simply because, it's
there.
73 Bob W7LRD
Seattle
CN87
- Original Message -
From: "edroth2006"
To: ams
Jerry...that pass at 0310 we share a few "moments" of foot print. Located in
CN87wk (Seattle). What frequency will you be on??
73 Bob W7LRD
- Original Message -
From: "N0JY"
To: AMSAT-BB@amsat.org, w...@yahoogroups.com
Sent: Monday, July 1, 2013 6:51:48 PM
Subje
Good luck Jerry..if you want to try to stretch the foot print a bit check your
link to cn87wk (Seattle). Must be AO-7, been in mode B for awhile now. Check
you tracking program, we'll see.
73 Bob W7LRD
- Original Message -
From: "N0JY"
To: AMSAT-BB@amsat.org, w...@
AO-7 is coming up the East Coast I will be on 2110Z, looking for Hector
73 Bob W7LRD
CN87
Seattle
- Original Message -
From: "k4feg"
To: starcom...@star-com.net, amsat-bb@amsat.org
Sent: Tuesday, June 25, 2013 1:14:25 PM
Subject: [amsat-bb] CO6CBF West Cuba Operations
GM Frank, all
You mentioned AO-7 is in full eclipse while over Antarctica. I see the same
thing on my Satpc32. However that is the ground track. From 1400Km or so high
does not the satellite still "see" the sun? I encountered this issue while
looking at sat to sat links.
73
confirming AO-7 was in Mode B at this pass 1715Z over the "left" coast.
73 Bob W7LRD
Seattle
- Original Message -
From: "k4feg"
To: starcom...@star-com.net, amsat-bb@amsat.org
Sent: Sunday, June 16, 2013 8:52:06 AM
Subject: [amsat-bb] AO7-b MODE??
Hello ever
drill holes in the boom to mast plate to change the boom to mast angle
73 Bob W7LRD
- Original Message -
From: "Rick Walter"
To: amsat-bb@amsat.org
Sent: Sunday, June 2, 2013 11:05:22 AM
Subject: [amsat-bb] Tilting Yagi up 15 degrees above horizon
With all the talk about
drill holes in the boom to mast plate.
Bob W7LRD
- Original Message -
From: "Rick Walter"
To: amsat-bb@amsat.org
Sent: Sunday, June 2, 2013 11:05:22 AM
Subject: [amsat-bb] Tilting Yagi up 15 degrees above horizon
With all the talk about tilting a Yagi 15 degrees above t
if there were a "real" ham on the ISS things would be different.
73 Bob W7LRD
- Original Message -
From: "Ing. Pavel Milanes Costa"
To: amsat-bb@amsat.org
Sent: Wednesday, May 29, 2013 7:04:23 PM
Subject: [amsat-bb] Re: Is there anyway to get a linear transponder
fowarding to the amsat list
Bob W7LRD
- Forwarded Message -
From: "James Christiansen"
To: pnwv...@googlegroups.com
Sent: Sunday, May 26, 2013 3:01:08 PM
Subject: [PNWVHFS] Fw: Garrett here, listing my FT-736R with options on
craigslist.
Here you go,
- Forward
just forwarding
for a local guy
http://seattle.craigslist.org/tac/ele/3830836872.html
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
A fun read...Les you should write a book! Titled " The Trials and Tribulations
of Ham Satellites".
73 Bob W7LRD
- Original Message -
From: "Les Rayburn"
To: "AMSAT Mailing List"
Sent: Thursday, May 23, 2013 11:33:21 PM
Subject: [amsat-bb] "Norm&q
in a file that is not
affected by downloaded process? Thanks from the digitally challenged.
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
Would the "K5GNA" Transystem downconverters work, the ones left over from AO-40
(sobsob)? Still have the L & S band stuff in moth balls, just waiting, waiting
& waiting.
73 Bob W7LRD
- Original Message -
From: "Stefan Wagener"
To: l...@highnoonfil
That Stefan would be great!
73 Bob
- Original Message -
From: "Stefan Wagener"
To: "I0ELE"
Cc: "AMSAT -BB"
Sent: Wednesday, May 15, 2013 4:40:59 PM
Subject: [amsat-bb] Re: ISS HamTV Frequencies
Thanks Emanuele,
The last part of your message is actually the most important part.
ditto
W7LRD
- Original Message -
From: "Robert C. Campbell"
To: amsat-bb@amsat.org
Sent: Tuesday, May 14, 2013 4:23:21 PM
Subject: [amsat-bb] ISS ham TV
I am so confused. Is anyone going to make up a paper, ISS HamTV for
dummies? I would like to work on this project but there does
ish. They are a fine antenna with a
fair amount of bandwidth. For a 16+ turn helix I have used stainless steel "U"
channel for the center support. If Clair, VE3NPC is listening, he's the
resident helix guy. Just my opinion, your mileage may differ.
73 Bob W7LRD
Seattle
---
nice going! we must remember, "if this were easy, everyone would be doing it".
Or as my Dad told me, "the difficult we do immediately, the impossible takes a
little longer".
73 Bob W7LRD
- Original Message -
From: "CO6CBF Hector"
To: "K4FEG&q
n depend more on the
computer or am I just getting lazy?
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http
1 - 100 of 468 matches
Mail list logo