Which BRAN from Boson do you recommend?
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Congrat.! and thanks for the tip, Jennifer
Cheers,
hv
LAX
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jennifer Mellone
Sent: Friday, October 20, 2000 2:59 PM
To: [EMAIL PROTECTED]
Subject: BSCN/Routing 2.0: Here's the Gouge...
I'm debriefing
The AGS is perfect for in Frame-Switch role. For the money, you can't beat
it. If you ever get a chance to check out CCIE Bootcamps, they use this
router in their dial-in lab racks. 10.0 up supports DLSW, Frame-Relay
Switching, X.25. This router is best is a lab setting, when used as a
first,I use "copy run tftp copy flash tftp" to backup
and second ,I think I should erase my flash,and copy the new version IOS
with "copy tftp flash" command,but I can't erase the flash,it tell me the
flash is unwriteable?how can I do?
and the name of the old IOS is "igs-in-l.110-4",but the name
Al Gore thought up the 53-byte cell after he invented the Internet :-)
Honestly- the best ATM books I've read (that were readable not a bunch of
algorithms) were Global Knowledge's beginner series. They explain
international agreements between cell sizes, echo, QOS, etc., etc.,. The
best ATM
Hi,
I have a 2523 switch which is to act as the FR switch.
Can anyone give me the part number for the DTE-DCE back-to-back cables?
Many thanks,
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
But I did extensive searching on CCO last night,
including the entire 10.x and 11.x release notes and found nothing that
indicates that frame switching is a feature/command in the AGS+.
Frame switching, from what I could see, was first introduced, into a
limited set of platforms in 11.2.
On Sat, 21 Oct 2000, Circusnuts wrote:
But I did extensive searching on CCO last night,
including the entire 10.x and 11.x release notes and found nothing that
indicates that frame switching is a feature/command in the AGS+.
Frame switching, from what I could see, was first introduced,
THANKS A MILLION TIME THANKS FOR YOUR LOVELY DEBRIEFING.MY DARKNESS
HAS BEEN TAKEN AWAY.
IT IS NICE AND DELIGHTFULL TO KNOW THAT SUCH PEOPLE LIKE YOU ARE STILL
ALIVE.
YOU ARE AN ANGEL.
CONGRAT AND CONTINUE MOVING FORWARD.
JOEL
-Original Message-
From: [EMAIL PROTECTED]
Amen
-Original Message-
From: derek lewinson
To: William E Gragido
Cc: cisco@groupstudy. com
Sent: 10/20/00 8:41 PM
Subject: RE: Sniffer Pro 3.5
you did mean to be rude and you were rude and you were unhelpful.
"Why on god's green earth" couldn't you have just bypassed this email,
Cisco Networkers 2000 in Beijing, 16-17 Oct
(Registered the CCIE exam study activity in this party!)
I met several CCIE Lab proctors in this conference,
(CCIE Power Session, Beijing - October 2000)
Mike Reid (Canada, [EMAIL PROTECTED])
Bill Parkhurst ([EMAIL PROTECTED])
Jeffery
Go to netfix.com. They are easy to find and go for about $60.00 a pop.
- Original Message -
From: FRS [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 9:31 AM
Subject: FR Back-to-Back Cable
Hi,
I have a 2523 switch which is to
Is this true!!!
- No more Decnet
- No more ATM Lane
Please comment!
Craig
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Steven
Sent: October 21, 2000 11:23 AM
To: [EMAIL PROTECTED]
Subject: Re: Goal to CCIE by Self-Study
Cisco Networkers 2000
Hi, try to configure the snmp on your router and
measure the utilization, broadcast, errors, etc. If you really want to see what
traffic that the link having, then you should put a probe analyzer (ex. HP
Internet Advisor) to tap the traffic on the physical link.
Hope it can help you out.
Passed the beta test (9E1-570) too, the result is beyond my
prediction. Another supprise today, I got transript for Voice 2.0
Beta(641-647) from Prometric, I got 950 (Passing scroe is 700). Don't
know how I do it. Maybe Beta test is more passable than formal test.
Maybe CCIE Security Written
hi all;
Any information related to MCNS are welcome.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi group,
I want to thank everybody on the list for their help on my bumpy road to
CCNP. It was a lot of work but it all payed off yesterday. Yesterday was
my day of glory. The day I passed my last test to be recognized as a CCNP!
Thanks again everybody for all your help! Jeff Lodwick
Does anyone no of a good home sniffer that is not going to break the bank,
that would work well to learn and to do small network analyzing...
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
HI all,
Can someone please tell me where I can find more information on the total
amount of PIX Firewalls that can be managed from one PIX Firewall Manager
server, and which protocol is used between the PIX Firewall and the manager
for changing the PIX configuration.
thanks a lot!!
Jacques
CCNP
http://www.protected.kiev.ua/index.html?sniffing-faq.htm
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I just passed the CCDA exam this morning. As said so many times before,
ambiguous questions made this a somewhat difficult test. On the other hand,
the technical content was fairly basic, so being a CCNP before taking this
one certainly helped. Overall, common sense, experience, and previous
ethereal. It's free. Visit www.ethereal.com . Setup requires a bit more than
just double click compare to commercial products.
Robert Borejszo
[EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone no of a good home sniffer that is not going to break
Go to ebay. You can get it there pretty much any time for around 30-40
bucks.
Just search using keywords like cisco serial cable or db60 or simply click
below
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=468780702
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=465892451
Do you knnw of a good home sniffer that is not going to break the bank,
that would work well to learn from and to do small network analyzing...
Brian
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
A 2500 runs from flash so when running in the normal operating mode you
can't erase the flash. You can either boot the router in boot mode(0x2101)
and have full read/write capability or use the copy tftp flash option. It
will prompt you to erase the flash just before it starts to copy the file.
Hi All,
There were several different reasons for choosing such smaller size of
payload carrier some of them as follows :
Why such a small-sized packet for ATM? Why not larger than 48 bytes in the
payload (48 bytes is very, very small)? The answer to that is simple. ATM
and the inventors of
When did they get rid of LANE? I just attended the power session in Orlando
a few months ago and they said LANE was a topic and it was outlined in the
CCIE Power Session presentation. Section VI of the power session stated
that they were 3 basic ATM scenarios: pvc, CLIP, and LANE. Has this
Cisco Security Manager is good for 100. I believe the Cisco PIX Firewall
Manager is good for 150.
- Original Message -
From: Jacques Allison [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 9:35 AM
Subject: Amount of PIX FIrewall
What material did you study for these exams please?
- Original Message -
From: Steven [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 9:16 AM
Subject: Re: Beta Results areout on Cisco Secure VPN..
Passed the beta test (9E1-570)
On Sat, 21 Oct 2000, Steven wrote:
Cisco Networkers 2000 in Beijing, 16-17 Oct
(Registered the CCIE exam study activity in this party!)
I met several CCIE Lab proctors in this conference,
(CCIE Power Session, Beijing - October 2000)
Mike Reid (Canada, [EMAIL PROTECTED])
Bill
Read Chapters 6,7,8 from Enhanced IP Services for Cisco Networks by Donald
Lee
before you read anything else.
- Original Message -
From: "whatshakin" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 3:58 PM
Subject: Re: Beta Results areout on Cisco Secure VPN..
Hello group:
I've done some search, but I was not very successful looking for some
lab/network scenarios to practice on my home lab equipment. I am looking for
CCNA and CCNP levels.
Any pointers or suggestions would be very appreciated.
Robert
_
FAQ, list
I would appreciate someone out there that might know why my CAT 5000 won't
let me change it's system name.
Heres the steps I take at the console:
AMMOCH11_Console (enable) set system name
System name cleared.
AMMOCH11_Console (enable) set system name switch
System name set.
AMMOCH11_Console
Hey Group,
I always wondered when taking my tests what they meant when they
said that there would be a 300/1000 scale. Then somebody on the list
explained that you start out with 300 points automatically. This is nice. I
just tried to figure out how many could be gotten wrong on the
To change the name used in your prompt use 'set prompt'. If you want to set
the system name then use the 'set sysname' command which you can verify with
'show system'.
Regards,
Aaron K. Dixon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Steven V.
I have an Anthrocart rack. About four feet high, with wheels and shelf for
stuff that needs to ride along. Kind of pricey, but definitely a high
cool-look quotient.
---Original Message-
From: Brian W. [mailto:[EMAIL PROTECTED]]
Sent: Friday, October 20, 2000 6:53 AM
To: Nigel Taylor
Cc:
The questions are not evenly weighted.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 4:13 PM
Subject: 300/1000 scale (correct me if I'm wrong butt...)
Hey Group,
I always wondered when taking my tests what they meant
I'm pretty sure the questions aren't all worth an equal number of points.
I could be wrong though.
-Brad
At 07:13 PM 10/21/00 -0400, [EMAIL PROTECTED] wrote:
Hey Group,
I always wondered when taking my tests what they meant when they
said that there would be a 300/1000 scale. Then
Congrats!!
""Jeff Lodwick"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi group,
I want to thank everybody on the list for their help on my bumpy road to
CCNP. It was a lot of work but it all payed off yesterday. Yesterday was
my day of glory. The
Go to the CCO
Phil
- Original Message -
From: "Aaron K. Dixon" [EMAIL PROTECTED]
To: "cslx" [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 5:37 PM
Subject: RE: how to update my IOS for 2501?
A 2500 runs from flash so when running in the normal operating mode
I just wrote out 2 good posts to the list and neither of them made it. I
don't understand how some days it works and others it doesn't. Wouldn't the
logical thing to do be to leave it the way it is when it works??? Oh well,
this probably wont make it either...
Mark Zabludovsky ~ CCNA, CCDA,
On a Cisco Catalyst 6500 and 4000 series switch, how can I stop system
messages from displaying onto the console. Thanks.
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about
Brian,
You don't need a multi-port NT1. The wiring is a bus topology. The same
way you connect multiple phones at home, just four wires instead of two.
Rodgers Moore
"Brian" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know of an NT1 model
43 matches
Mail list logo