Actually, it can't. ATM is not supported. It is a
simple L2 protocol.
--- cheekin wrote:
> Hi,
>
> Cisco documents state that "CDP can run on all media
> that support SNAP".
> Does
> anyone know why?
>
> Thanks.
>
> Regards,
> cheekin
> FAQ, list archives, and subscription info:
> http://ww
I think everybody might be right here but arguing about different parts of
the process, or confusing the meaning of the previous post , so just to add
more confusion:
Peter said that all every station could send as much as they want, which I
think he was referring to their own ethernet segment/(sw
How about because unlike MSCE, Cisco certifications actually teach you about
networking?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6484&t=6367
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
JunOS... JunOS...
(just kidding)
IOS... IOS...
--- MIRSKY Carl wrote:
> MM PROZAC!!
>
>
> -Original Message-
> From: Charlie Hartwell [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, May 30, 2001 3:29 AM
> To: [EMAIL PROTECTED]
> Subject: RE: a
Hello.
I don't really have a problem so much as I am trying to get a better
understanding of how Spanning Tree works. I am currently studying for my
switching exam and am reviewing Spanning Tree. I have the following
statement from the Cisco course manual and in the case of redundant paths to
t
conf t
logging buffered 99 debug
no logging console
- Original Message -
From: "Nabil Fares"
To:
Sent: Wednesday, May 30, 2001 12:50 PM
Subject: 6509 and logging messages [7:6479]
> Greetings all,
>
> How can I disable messages to prompt me when someone connects to the
switch?
> B
I'm working through Slatterly and Hutchnik's Lab Practice Kit and I'm stuck
on the very last portion of their OSPF lab. In this portion of the lab
they have OSPF redistributing into IGRP. On the router with OSPF and IGRP,
the IGRP interface has an IP address with a 24 bit mask. Because of this,
Hi folks,
I am in need of a wireless solution for my home-lan for my laptop. So if
you have Cisco aironet, netgear, or linksys that are not used, I would
like to make a trade with you. I need a base-station and a pcmcia
card. Below is what I currently have in my inventory:
A few 8megs flash s
Heather,
Its the received port id
You should find that port 1/2 is connected to the 6509 on a lower port than
port 1/1
do a sh cdp neigh to confirm
Hope this is correct
-Paul
-Original Message-
From: Buri, Heather H [mailto:[EMAIL PROTECTED]]
Sent: 30 May 2001 18:20
To: [EMAIL PROTECTE
Hi!
> Passing score is 700.
> BTW, the exam is already retired as May 15.
>
640-447 is retired and the replacement is 640-647...
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/endoflife.htm
--
cU,
Laszlo Csosza
Message Posted at:
http://www.groupstudy.com/form/read.php?f
On Wed, 30 May 2001, simonis wrote:
> "Howard C. Berkowitz" wrote:
> >
> > >Hi,
> > >
> > >i have seen recently a vast amount of non-cisco related questions
recently
> > >and i thought that i would try my luck
> > >
> > >my uncle needs some heart surgery and was wondering if anyone has some
Read carefully - routerA and routerB both have interfaces in Area0 and
Area1, which makes them both ABRs
-e-
- Original Message -
From: "Michael L. Williams"
To:
Sent: Wednesday, May 30, 2001 9:01 AM
Subject: Re: Wanna Be a CCIE? Try This One [7:6076]
> Wait a second.. where are
Hi Paul,
You were right! Thanks for clearing that up for me. I feel kind of silly
now because I think I was trying to make it more difficult than it was, but
it is nice to know the answer!
pet4006_8 (enable) sh cdp neigh
* - indicates vlan mismatch.
# - indicates duplex mismatch.
Port Devi
Has any had the opportunity to evaluate an intrusion detection system? I
know Cisco makes one, not sure what it runs for an OS and how well it's put
together. Have looked at Cabletron, excuse me, Enterasys, and Webtrends.
Anyone offer any insight?
Mel L. Chandler, A+, Network+, MCNE, MCDBA, M
Has any had the opportunity to evaluate an intrusion detection system? I
know Cisco makes one, not sure what it runs for an OS and how well it's put
together. Have looked at Cabletron, excuse me, Enterasys, and Webtrends.
Anyone offer any insight?
Mel L. Chandler, A+, Network+, MCNE, MCDBA, M
remember that with ospf if you are redisting a network without its
classfull mask
IE if you are using the network 10.0.0.0 255.255.255.0 that you must use the
subnets
keyword, or else the route will not be redistributed. Or something like
that.
As with everything on cisco's it assumes classfu
Does any one know a cable supplier for a dce/dte cable to connect two cisco
2621 routers with dual serial modules (wic-2t, with smart jack). I looked
through the archives and found alot od 2500 cables but nothing for the new
connector.
Thanks
Joe
Message Posted at:
http://www.groupstudy.com/
>From Crucial site:
And 16MB is available for $ 60.00.
FPM with parity, 4 or 16 MB single bank.
What is parity memory?
Parity modules have an extra chip that detects if data was correctly read or
written by the memory module, depending on the type of error. However, a
parity module will not corr
try pacificcable.com I've had great luck with those guys.
--
Neil Schneider
MCT MCSE CCSI CCNP
""Joe Cremer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does any one know a cable supplier for a dce/dte cable to connect two
cisco
> 2621 routers with dual serial modules
All,
When matching community string in BGP routes, it seems to be different than
matching as-path,
I have seen expression(new format in cisco) like 701: * to match any
strings
starting with 701, in as-path term, it should be written like " 701: .*"
I saw the 701:* from juniper manual, did not
All,
When matching community string in BGP routes, it seems to be different than
matching as-path,
I have seen expression(new format in cisco) like 701: * to match any
strings
starting with 701, in as-path term, it should be written like " 701: .*"
I saw the 701:* from juniper manual, did n
Passed today at 3:00 with a score of 879. 64 questions in 30 minutes.
Scoring Range 300-1000, Minimum Passing Score 699.
YEAH!!
BTW, regarding Atm/lane's presence on the Exam Blueprint, It was accurate.
(minimally)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6501&t=650
nope.
thats wrong...
it's four steps.
1. lowest root BID
2. lowest path cost
3.lowest sending BID
4.Lowest port ID.
all of which are contained in a Config BPDU.
this is also part of how the root bridge is established...
-Peter Slow, CCNP Voice Guy
- Original Message -
From: "Buri, Heath
I concur. I should have been a bit more clear in that I was addressing the
issue of a gig link between two switches.
For traffic that remains within a single switch, different things can be
done with the switch fabric, thus increasing the number of packets handled.
But a single gig link between
it's a little 1-u rackmount thingy running solaris.
it has two interfaces. one is a regular ethernet interface, the other doesnt
get an IP it lust sits there and sucks up everything it sees on that link.
- Original Message -
From: "Mel Chandler PMI"
To:
Sent: Wednesday, May 30, 2001 3:1
Try
www.pacificcable.com or www.stonewallcable.com
I'm guessing on the next: [EMAIL PROTECTED] aka BaronVonPuppy. Bob is a
CCIE who sells cables at a good price.
> -Original Message-
> From: Joe Cremer [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, May 30, 2001 2:40 PM
> To: [EMAIL PROTE
Try www.PacificCable.com
Raul
-
Original Message -
From: "Joe Cremer"
To:
Sent: Wednesday, May 30, 2001 3:39 PM
Subject: Back to back Serial for Cisco 2621 [7:6497]
> Does any one know a cable supplier for a dce/dte cable to connect two
cisco
> 2621 routers with dual serial modules
Check out Intrusion.com
They make some truly great products
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mel Chandler PMI
Sent: Wednesday, May 30, 2001 2:08 PM
To: [EMAIL PROTECTED]
Subject: Intrusion Detection [7:6494]
Has any had the opportunity t
That's going to be a SmartSerial back-to-back (DTE-Dce) cable.
http://www.pacificcable.com/CiscoCables.htm
$49.00 New, NotCisco.
-Original Message-
From: Joe Cremer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 30, 2001 3:40 PM
To: [EMAIL PROTECTED]
Subject: Back to back Serial for Cisc
Earlier in the month I posted a question on how you could have multiple
commands coming from one menu item i.e. user presses key 1 and it shuts down
an interface. I have eventually came up with a solution which is posted
below. Just in case anyone out there has to do the same.
have a menu which
It's interesting to see how things that we take for granted (ie. A
switch allows for multiple conversations while a hub can't) turn out to
be so complicated when you try to understand what's taking place "behind
the scenes". To sum up what has been uncovered thus far (and maybe put
an end to this
I just got 6 b2b serials from Robert Lowery for $24.
I prefer these over the others because they're only 3 ft
long and costs less than half the regular b2b cables. Not only that but
they're a lot lighter too. Perfect for home
lab setup. His e-mail is [EMAIL PROTECTED]
Elmer
-Original Message--
I have a 2611 with a t0/0 an e0/0 and a s0/0.
The router was set up by someone else who made it a source bridge using the
s0/0 interface. I am trying to interface a tiny network of 5 PC's that are
on a 3com switch to that e0/0 interface. I gave the interface an IP address
on the same schema as th
With Half Duplex, It's
Talk, Listen, Talk, Listen
With Full duplex, I think its:
Talk, Talk, Talk, Talk, Talk, Talk
- simultaneously -
Listen, Listen, Listen, Listen, Li
Only one frame can be transmitted at a time, with the other packets stacking
up in the buffer in a FIFO fashion.
The only pau
Snort is also a decent one for the price (free)
- Original Message -
From: "William E. Gragido"
To:
Sent: Wednesday, May 30, 2001 3:11 PM
Subject: RE: Intrusion Detection [7:6494]
> Check out Intrusion.com
>
> They make some truly great products
>
> -Original Message-
> From
Thanks to all. I didn't see the smartjack cables when I went out earlier.
I'm on the right track now. Joe
""Joe Cremer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does any one know a cable supplier for a dce/dte cable to connect two
cisco
> 2621 routers with dual serial m
Has anyone used the IPexperts CCIE Routing and Switching lab preparation
workbook? The site I found it at was www.ipexpert.net. I reviewed the free
sample IPX lab and it looks great. I liked the technical depth of each
task, the technical tips, and the instructors notes provided at the end
link please
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Russ Kreigh
> Sent: Wednesday, May 30, 2001 4:48 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Intrusion Detection [7:6494]
>
>
> Snort is also a decent one for the price (free)
>
>
>
> --
Jason,
Post us your config and we could probably get to the problem much quicker.
Also can you tell us the Ip addresses / subnet masks and default gateway
which is setup on the pc's.
Cheers
-Original Message-
From: Jason Witover [mailto:[EMAIL PROTECTED]]
Sent: 30 May 2001 21:39
To: [EM
I just came across this link in the search for information about FDDI, and
4B/5B. Thought I'd share it with the group. It's an oldie, but a goodie.
Chris
ftp://ftp.compaq.com/pub/archives/networks/fdsld-sd.pdf
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6520&t=6520
STFW!
- Original Message -
From: "Christopher Kolp"
To:
Sent: Wednesday, May 30, 2001 4:02 PM
Subject: RE: Intrusion Detection [7:6494]
> link please
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Russ Kreigh
> > Sent: Wednesda
*giggle*
can we see your config?
- Original Message -
From: "Jason Witover"
To:
Sent: Wednesday, May 30, 2001 4:38 PM
Subject: Can't Ping e0/0 [7:6513]
> I have a 2611 with a t0/0 an e0/0 and a s0/0.
>
> The router was set up by someone else who made it a source bridge using
the
> s0/
thank you, i will check that out..
had asked for the snort link before typing in
snort.org (*duh?*)
This week needs to go quickly!
ck
> -Original Message-
> From: William E. Gragido [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, May 30, 2001 5:28 PM
> To: 'Christopher Kolp'; [EMAIL PR
Wow, such hostility.
Sorry for raining on your parade, I found the page and am checking it out.
Why don't you go back to answering the phones and get off my back.
ck
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Russ Kreigh
> Sent: Wednesda
Cisco probably chose SNAP for CDP because SNAP is supported on Ethernet,
FDDI, and Token Ring. That probably made the implementation a bit simpler.
Other than that, SNAP doesn't have any advantages that I can think of.
Also, I can't remember the exact details, but sometime late in the 1980s,
t
A switch port definitely delineates collision domains. Stations reachable
on different ports don't share the media and are not concerned with each
other's collisions. That answers part of the question. The link that I
found before (and can't find now) confirmed that this is true even with
cut-
RARP requires a RARP server. It was a predecessor to BOOTP and DHCP. It was
used by diskless stations that had a MAC address but no IP address. RARP
servers were usually implemented on a UNIX machine. They were pretty easy
to set up. They included the functionality to also TFTP to the diskless
STFW? Hmmm?
Security Things to Fiddle With? .Org or .Com?
-Original Message-
From: Christopher Kolp [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 30, 2001 14:47
To: [EMAIL PROTECTED]
Subject: RE: Intrusion Detection [7:6494]
Wow, such hostility.
Sorry for raining on your parade, I
www.intrusion.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Christopher Kolp
Sent: Wednesday, May 30, 2001 4:03 PM
To: [EMAIL PROTECTED]
Subject: RE: Intrusion Detection [7:6494]
link please
> -Original Message-
> From: [EMAIL PROTECTED]
Oops..forget to cc group...
thanks,
rahul,
- Original Message -
From: "Rahul Kachalia"
To: "Bill Heaton"
Sent: Wednesday, May 30, 2001 2:24 PM
Subject: Re: IPexperts CCIE LAB Workbook [7:6516]
> Hi Bill,
>
> I just start reviewing looks great to me..it has different scenario's
> w
MORE, MORE, MORE!!! I love TLA's. But don't worry, I can quit using them
anytime I
wan't, I'm not addicted (conflicting opinions of my students not
withstanding)!
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Priscilla Oppenheimer wrote:
> Cisco pr
Good call I was going moreso by the diagram...
"EA Louie" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Read carefully - routerA and routerB both have interfaces in Area0 and
> Area1, which makes them both ABRs
>
> -e-
>
> - Original Message -
> From: "Micha
Check out http://www.boson.com and get their practice exams.
"jish mj" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
>
>
> I would like a copy of CCNA 2.0 questions
>
> I have finished my Mcse and am preparing for my CCNA.
>
>
>
> I would be greateful to you
>
I see.. I knew I didn't remember hardly any ATM/LANE on
there.. almost basic definition stuff.
Congrats!
Mike W.
"Hire, Ejay" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Passed today at 3:00 with a score of 879. 64 questions in 30 minutes.
> Scoring
Firewall
|
-- VLAN 1
|
Local Director
|
---VLAN 2
|
Server
I'm getting ping loss going to my default gateway. Is there any problem
with having the local director bridge? Both its interfaces are connected to
the same switch. The switches are
Great job!
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 30, 2001 3:50 PM
To: [EMAIL PROTECTED]
Subject: PASSED: CCNP SWITCHING 2.0 (BCMSN) [7:6501]
Passed today at 3:00 with a score of 879. 64 questions in 30 minutes.
Scoring Range 300-1000, Mini
Would it also be possible to use SNMP to copy the config from the router to
the TFTP server, remove the service password encryption command from the
config, and replace those encrypted password statements with new ones that
aren't encrypted? Once the new config has been re-installed on the router
I have an NM-4E on loan to a client at the moment and they have (finally)
decided that they will be purchasing one of these modules to use in their
2600
on a permanent basis.
They have asked me if I would be interested in selling mine, which could save
them a fair amount as they are an expensive
I am a little confused why Diffie-Hellmen's key exchange is needed for IKE.
When I setup ISAKMP, regardless of the authentication I am using I need to
supple a key weather pre-share, public/private, or RSA sig. If this is the
case why can't the two VPN peer just use this key for setting up the VPN
I was told today that the PIX 506 can only support 4 VPN tunnels. It this
true and does it include remote access users. I just sold a customer a 506
and he wants to connect 10 salesman to it that have laptop computers.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65
Why do you need to garner satisfaction by beating up on people who ask for
help? Why don't you just answer the man's question?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6541&t=5832
--
FAQ, list archives, and subscription in
Just passed with a 814
alot of questions on multicast
D'Wayne Saunders
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6542&t=6542
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
What's the question ??? I have a lot of experience in building my
homelab...
Phil
- Original Message -
From: Chris Rock
To:
Sent: Wednesday, May 30, 2001 8:37 PM
Subject: Re: CCIE Home Lab? [7:5832]
> Why do you need to garner satisfaction by beating up on people who ask for
> help?
This all seems like a lot of work...
Since you have the RW password, why not use SNMP to upload a config
file consisting of only:
enable secret [password]
or
enable password [password]
Alan
- Original Message -
From: "Chris Rock"
To:
Sent: Wednesday, May 30, 2001 8:21 PM
Subject: RE:
The Short answer is it can't be done.
You can have a Fractional T-1 with 56K or 64K,
but all 24 channels are ALWAYS there, you have just chosen to ignore some.
DDS 56K is different and not interoperable.
in order to interoperate, you need a channel bank to connect the 56K
and T-1 (one channel} to
List is $4000.00 US. Iv'e seen them on ebay for about 1000-1200 US. Don't
know if that helps you at all.
Neil
""Adam Burgess"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have an NM-4E on loan to a client at the moment and they have (finally)
> decided that they will b
Can you use CW2k to do a search on multiple switches for a specific MAC
address so that I can find out which switch and port the MAC address is
from? Or do you know what will do it? It's a pain to look at multiple
switches to find the MAC address. Thanks.
Yes you can
Gayathri
"Todd Kari"
Here's another:
http://www.networkmagazine.com/Tutorials/FDDI_Fundamentals.html
> I just came across this link in the search for information
> about FDDI, and
> 4B/5B. Thought I'd share it with the group. It's an oldie,
> but a goodie.
>
> Chris
>
> ftp://ftp.compaq.com/pub/archives/netwo
actually, this is an ON-TOPIC conversation
I actually posted this as a proposition in a post a few weeks ago, and then
started getting the equipment.
What I have right now is
1 CPA-2511 (terminal server - very important in the CCIE Lab) - can also
double as a router
1 2504 (T/R, 2 ser, 1 BRI)
3
Laszlo,
CVOICE 640-647 is retired also as CCNP Specialization exam,
as May 14, 2001. However it still available for Cisco Partner qualification.
HTH
Engelhard M. Labiro
Netmarks Inc.
3rd Group, Network Solution Department, Technology & Eng. Division
1-3-12 Moto Akasaka, Minato-Ku, Tokyo, Japan 10
Don,
My lab consists of :
1 2514 Dual-eth
3 2501's for BGP labs
2 4000's and a 4500 w/ various combinations of NPs (Eth, Serial, BRI, Token,
etc.)
*I think these are a great buy on ebay because you can change out the
different NP's to adapt to the particular lab config you want to
acheive.
A little help
As usually we lost the passwords!
We have vty password but no secret.
I need a good cracks for that router
Any help?
TIA
William Harrison
CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6552&t=6552
--
FAQ,
My lab consists of:
2501 (1 Eth, 2 Serial)
2503 (1 Eth, 2 Serial, 1 ISDN)
2504 (1 Token Ring, 2 Serial, 1 ISDN)
2504 (1 Token Ring, 2 Serial, 1 ISDN)
2511-RJ (1 Eth, 1 Serial) - Terminal Server
2514 (2 Eth, 2 Serial)
2522 (1 Eth, 2 Serial, 8 Low Speed Serial, 1 ISDN) - Frame Relay Switch
2524 (1
At 09:15 AM 5/31/2001 +0800, you wrote:
>yes
>
>pleasedo a reply group so that everyone can participate instead of sending
>directly
>
>- Original Message -
>From: John Chang
>To: Gayathri
>Sent: Wednesday, May 30, 2001 9:14 PM
>Subject: Re: MAC Scanner [7:6363]
>
>
> > Can you use CW2k
Hi,
I have a pair of 2502, r1 and r2, and when I upgrade r1's IOS I get r1
report checksum error. Since the upgrade must erase the old IOS in flash,
I'm then forced to boot in RXBOOT. After then I connect r1 back-to-back to
r2 and issue copy tftp flash to get the IOS from r2's flash. Both routers
Dear gays,
any one can suggest me
what software should I use for monitoring the IPSec traffic rate of the VPN
500X series?
I had follow the spec of VPN500X and download the MIB-II form Cisco Website,
but the variables inside seems not related to my purpose.
(IP-SEC-FLOW.my)
Any comment or opi
The boot code in the 2500 does effect the IOS. What is your Sho Version &
what IOS are you trying ???
Phil
- Original Message -
From: Fanglo MA
To:
Sent: Wednesday, May 30, 2001 10:54 PM
Subject: IOS boot problem [7:6555]
> Hi,
>
> I have a pair of 2502, r1 and r2, and when I upgrad
Good luck.. Let us know how it went.
""[EMAIL PROTECTED] (jj)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Taking the IE tomorrow in SJ. Anyone else coming...heheh
> -jj
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report miscondu
since this appears to be a regular occurrence, you may want to save this
link.
best wishes
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
William Harrison
Sent: Wednesday, May 30, 2001 7:31 PM
To: [EMAIL PROTECTED]
Subject:help
a 2621(just a wic-1adsl and a wic-2t),its ios is
c2600-ik8o3s-mz.122-1.bin(the older is c2600-io3s56i-mz.121-5.bin,then
update to 12.21),but it doesnot know the wic-1adsl module.why?\
please tell me as soon as possible,thank you !
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
I'm now cannot access my routers but I remember that it is 11.0(10c)XA and
I'm trying to upgrade to IOS 12.2. Does the upgrade version affect the tftp
copying process?
""Circusnuts"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The boot code in the 2500 does effect the IOS. W
Hello group,
I have a nagging question about how the DHCP server assigns an IP address to
a DHCP client from the correct pool of addresses. Let me give a scenario so
that you understand my concerns.
A host called Subnet_A _Client sends a dhcp request. The router's interface
on subnet A is Ethern
Here is a good URL
http://www.google.com/search?hl=en&lr=&safe=off&q=DHCP
http://www.altavista.com/sites/search/web?q=DHCP&kl=XX&pg=q
""Lists Wizard"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello group,
>
> I have a nagging question about how the DHCP server assigns an
Of course it helps if the #$^% list doesn't eat the url:
http://www.cisco.com/warp/public/474/pswdrec_2500.html
sorry
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Chuck Larrieu
Sent: Wednesday, May 30, 2001 8:34 PM
To: [EMAIL PROTECTE
Version 12.2.x requires at least 16Mb of flash and 16MB of memory. Make
sure you meet this requirement...
""Fanglo MA"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'm now cannot access my routers but I remember that it is 11.0(10c)XA and
> I'm trying to upgrade to IOS 12
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6566&t=6566
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Knowing others will give you a succinct answer, I would also suggest you can
take a peek at RFC 1541
ftp://ftp.isi.edu/in-notes/rfc1541.txt
for some details, such as the DHCP request packet format. In there you will
find a field defined as giaddr ( Relay agent IP address, used in booting
via a
Hi, guys. It's been a while since I've posted something here but I'm pretty
stumped with this problem somehow. Anyway, here's my problem:
Remote office subnet: 192.168.5.0 255.255.255.0
Plan to change subnet into 192.168.19.0 255.255.255.0
Router relaying dhcp requests to 192.168.1.11 (DHCP Serve
At 10:31 PM 5/30/01 -0400, William Harrison wrote:
>A little help
>
>As usually we lost the passwords!
>
>We have vty password but no secret.
>
>I need a good cracks for that router
>
>Any help?
>
>TIA
>William Harrison
>CCNA
There are a number of password recovery techniques assuming you have
c
and dram is 48m,flash is 16m
""Leo Shen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> a 2621(just a wic-1adsl and a wic-2t),its ios is
> c2600-ik8o3s-mz.122-1.bin(the older is c2600-io3s56i-mz.121-5.bin,then
> update to 12.21),but it doesnot know the wic-1adsl module.why?\
>
>
Since I m 200 miles from the router a console connection is not possible.
And I knew that I should have put a modem on the aux port but!
I was hoping the someone had a brut force password crack that I could run
against the enable password?
Thanks again
William
Message Posted at:
http://
Hi all,
I am currently configuring 2 protected ports on a Catalyst 2924 to allow
them to talk to each other with the help of a Cisco router. My
understanding of the protected port on the catalyst switch is that, host on
a protected port is not able to communication with another host on another
>From everything that I've seen, that's just a suggested marketing limit
aimed at
encouraging customers to upgrade to a higher level 515 or 525.
Steve
Rick Holden wrote:
> I was told today that the PIX 506 can only support 4 VPN tunnels. It this
> true and does it include remote access users. I
yes! I have 16F/16D installed.
Regards,
Fanglo
""Thomas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Version 12.2.x requires at least 16Mb of flash and 16MB of memory. Make
> sure you meet this requirement...
>
>
>
>
> ""Fanglo MA"" wrote in message
> [EMAIL PROTECTED]">ne
On Thu, 31 May 2001, William Harrison wrote:
> Since I m 200 miles from the router a console connection is not possible.
> And I knew that I should have put a modem on the aux port but!
>
> I was hoping the someone had a brut force password crack that I could run
> against the enable passwor
Voice interface cards can only be used
in voice network modules (NM-1V and NM-2V)
regards,
Orest
Sergey Konovalov schrieb:
> WIC2T + Serial WIC + Voice 2V
>
> Problem: Router cannot see its interfaces (hardware)
> show interfaces- received none
> show version - received none in hardwa
hi all
Trying to configure for my test setup, an E0.1 interface on my 1603
router. I create the int no problem, however when I try to give it an IP
address it tells me that on interfaces intended for ISL or 802.10 can be
configured on this interface.
My question is, can I setup mutliple sub inte
101 - 197 of 197 matches
Mail list logo