Hi Guys
I am preparing for my CCIE written and will give it
next month. I am using clark for Swithching, Doyle for
Routing and Halabi for BGP. My question is that Caslow
is enough for all WAN,Bridging and Voice stuff or I
have to consult more resources?
Any input highly appreciated.
Thanks,
CONGRATS!!
Sundar Palaniappan I passed CCIE written on 9/17 with a score of 74.
Thanks to all the members of this technical newsgroup and groupstudy.com
for
all the help.
I used the following to prepare:
Bruce Calsow
CCIE Exam
Lou Rossi's TR White Paper
Boson Exams.
In
[demime could not interpret encoding binary - treating as plain text]
OR ---
Stan, Kyle, Eric (for the heavy/big boned equipment), Chef (all NICs run
in promiscuous mode), and Kenny (always a suspect if an interface appears
dead). Of course, the firewall is named Officer_Barbrady.
Hi group,
I have set CAR on one of my sub-interfaces on my 3661 router, the problem is
that it only limits the OUTPUT packets. Here are my configs:
interface FastEthernet0/0.3
description 32/128 kbps test
encapsulation isl 3
ip address 213.217.37.245 255.255.255.252
no ip redirects
no ip
Hi,
I am using Radiator radius and i want to give privlege to my vty users .For
ex suppose if A user login to my router he should only able to ping
nothing else and after command execution comlete it should automatically
logout from router .we can do this on local authentication but how can i
Hi,
How a ping and traceroute command works in cisco router and how can i
identify problem in network by ping and trace from router
Thanx
kaushalender
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20821t=20821
--
FAQ, list
No unfortunately in the UK this would seem to be not uncommon. We've had
people posing as others and passing tests for just about everything, driving
licences to university degrees. So people from overseas with slightly more
questionable procedures only get found out on the job. This guy had
I think fraud, corruption, and cheating are just general problems in all
facets of society, the only real difference being how much. From those who
cheat on their college entrance exams, to those who claim academic
credentials and work experience they do not have, to those who obtain
multiple
Hi All,
I have big problem with our apple machines. Last week, I replaced my old
3Com switches to cisco 3524 switches. Then most of my apple machine can not
see each other(cannot access appleshare)but it can see and can access PC
Servers. I try to configure the speed and duplex according
Did you happen to also read the NDA before you start the exam ? Or did you
get the answer for the NDA from the cheatsheet as well ?
ou henry wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Yes, they were just from my 504 exam last Friday.
John, and I just got 923. Why should I
At my last job we named all the servers in one building after atoms in the
periodic table. One location used names from Babylon 5, another used
Scottish
names and another used planets.
Routers and switches were different. We actually came up with a meaningful
convention. For instance:
we know the problem exist. My question is how we could minimize this? How
many users we have on this list. If all of us write to Cisco and/or to
Prometric Testing center, will it be enough to bring their attention to the
said issue.
Any other suggestions
|-Original Message-
I would think that LMI is disabled and no keepalive is
set on the point-to-point interfaces therefore even
though PVC is down . Interface still show up up . My
advice is that you should always turn on LMI unless it
is a simplex link for the case of a satellite
receive-only downlink
regards,
Try these out:
http://www.cisco.com/warp/public/105/ext_ping_trace.html
http://www.cisco.com/warp/public/105/traceroute.shtml
Regards,
Gareth
kaushalenders wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
How a ping and traceroute command works in cisco router and how
We have a external DSU/CSU already installed by our telecomm people to pair
of the voice and data lines. I also have access to a spare (ie
free)internal T1 DSU/CSU WIC for my 2600 router. Can I use this T1 DSU/CSU
WIC with the External DSU/CSU already existing? Or do I need to buy a
Moe,
Set all of the switchports that the McIntosh clients are attached to to
begin forwarding immediately.
See this document on CCO.
http://www.cisco.com/warp/public/473/12.html
Hope this helps
Christopher Supino
CCNP, CCDP, MCSE, CNA, ASE
Senior Network Design Engineer
TransNet Corp.
I you are taking the same circuit from your WicT1CSU to your external CSU,
that will not work. You can take a regular WicT1 to a port on your external
CSU just hunky-dory. Your can only break off your channels at one point in
the circuit. Oh yeh, I love Priscilla... Please write when you get
They also have to all be in the same vlan unless you're routing AppleTalk
across your vlans.
king kaung wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I have big problem with our apple machines. Last week, I replaced my old
3Com switches to cisco 3524 switches. Then
They also have to all be in the same vlan unless you're routing AppleTalk
across your vlans.
king kaung wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I have big problem with our apple machines. Last week, I replaced my old
3Com switches to cisco 3524 switches. Then
Turn on portfast, which causes a switch port to go into forwarding mode
more quickly. I bet the Macintoshes didn't receive AppleTalk parameters
correctly because the switch port didn't start forwarding while they were
booting and starting up AppleTalk.
Priscilla
At 07:01 AM 9/23/01, king
At 07:34 PM 9/22/01, Gareth Hinton wrote:
Shouldn't this sort of thing be blocked?
Yes, but how would you automate the blocking? It needs a distributed
approach where each of us individually ignores requests for help when the
questions appear to be from the actual test.
Priscilla
I have a
You can get whitepapers on Tivoli off of IBM's website. OpenView from HP's
site, and CiscoWorks from (duh) Cisco's site.
I am reviewing all three currently also, as part of a project that our
company is involved in. If this is something that you or your company is
looking at, it might be
The service will also restart anytime you add a new device or make any
modification that requires the restart (but I'm guessing you already knew
that). So, from a security perspective, and based on that fact, perhaps
someone other than yourself is making changes to the ACS server which is
Bringing this back to the technical...
I believe what Priscilla is describing meatware-based packet filtering,
where each header (subject) is audited to see if the entire packet (or
e-mail in this case) is forwarded to the CPU (brain).
Perhaps I've spent too much time with my PIX this
I was wondering if anyone has formed any opinions yet as to the security of
the new ver 6 of the PIX IOS using the HTTP interface. As I'm sure most
folks know, there were some exploits with the HTML interface on Cisco's
routers and switches, so I choose not to run those. But, since PIX
By the way, before anybody asks...
Hardward - equipment
Software - Code
Meatware - people
--- Dennis
-Original Message-
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Sunday, September 23, 2001 10:40 AM
To: [EMAIL PROTECTED]
Subject: RE: Some questions about Cheetsheets 504
Actually.. I think messages with the word Cheatsheet in them are
filtered, if I recall correctly.
The poster misspelled the word, I just noticed.
For the cases where the person is too clueless to spell correctly, couldn't
read or understand the NDA, and is asking for answers on a test
Hi Group,
The PIX flash is corrupted cos used tftp to load 4.x into it.
Apart from customer support from cisco , anybody know how to recovery it
Need this information a.s.a.p.
anyong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20845t=20845
What model # is it?
If it is a model with a floppy:
Make a Pix boot helper disk (using rawrite) and boot your PIX from that.
Load a new PIX image from a TFTP server.
-Brad Ellis
CCIE#5796
Network Learning Inc
[EMAIL PROTECTED]
used Cisco: www.optsys.net
anyong wrote in message
[EMAIL
I've seen one of the risks already.
I did an install just over a week ago, and unfortunately let the customer
know about the PDM GUI. I've had three maintenance calls so far, all of them
turned out to be config changes made by PDM.
One of the configs was hardly recognisable. I think there may be
Dear All,
This is not true as far as pakistan concern, I do not know about India, I am
a Pakistani
and i have done my CCNP in after two and half years of hard work and now i m
doing my
CCIE,
If any one know any thing like that anywhere in the world and you have a
prove of it
then please report
I have some bad news for you. The PDM also allows outside connection, the
same thing
goes with SSH (version 1). I wish Cisco starts implementing SSH version
2 on all the PIXes
From: Gareth Hinton Reply-To: Gareth Hinton To:
[EMAIL PROTECTED] Subject: Re: PIX ver 6 Security [7:20842] Date:
Sun,
Its true.. Both pak and india have mushroomed training
centers and prometric testing centers and there is
nothing like an ID in both the countries. So even You
and I can just go in and write tests for anybody for
money. I have seen couple of guys here in USA from
those countries who dosent know
I am not sure about Cisco certifications but this was
indeed true for MS certifications in India and
Pakistan, where people use to sit for their friends
and give their exams by charging handsome amounts.
Those so called friends use to do it for Canadian
Immigration mostly. I know lots of Canadian
Hi,
Here is a little food for thought.
Recently one of the most common questions I am asked is how can I reduce
port scanning down my link.
Almost invariably the clients have a network being advertised down there
link with a number of addresses far exceeding those being used. In a
number of
Indranil,
Have you signed the certification agreement? You should have received a
paper copy that you can sign, or go to the certification tracking system
and sign it online if you haven't already - you aren't certified until
you've signed it.
JMcL
- Forwarded by Jenny Mcleod/NSO/CSDA on
Howdy there folks, question for you. Studying for the BCRAN, I have a lab
with two 1602R's with BRI modules. I am simulating a FR connection with BRI
configured for backup in legacy dialer-string mode.
The backup works fine; ie. I pull the FR cable and the backup comes up, I
send interesting
looks like your idle-timeout is too short. It is saying if i do not see
interesting traffic for 15 seconds i will end the call.
The configs of the accesslists are also wrong.. How will link be brought up,
you have denied all traffic to bring up link, as in access-list
there is implicit deny all
Right, the problem is not that it won't come up. The problem is that it DOES
come up intermittently for no apparent reason (apparent to me at least)!
I removed the access list entries and shortened the idle-timeout
intentionally in an attempt to figure out why it's still dialing
intermittently.
Hi Folks,
I am trying to get timestamps alongwith my 'syslog' output by using the PIX
command logging timestamps. However, even with this command, whenever I do
a show syslog, I fail to see any timestamps logged. Am I missing something
???
How can I append timestamps with the syslog messages. Or
You need to go with a extended access -list
Raul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sean Wolfe
Sent: Sunday, September 23, 2001 7:48 PM
To: [EMAIL PROTECTED]
Subject: Legacy DDR won't keep quiet [7:20854]
Howdy there folks, question for
Personally, I've tried using RADIUS to assing priv and auth to users on
Cisco devices and found it to be pretty much a waiste of time. Cisco seems
to be much more favorable to TACACS+, especially for performing the types of
limitations you are discussing. I have even rec'd info from TAC
Hi All,
I do not know if that's true or not. But judging from how prometric done
verification on the candidate, the possibility is very high. As we all know
some ID need to be shown before taking the exam, and it's up to the testing
center to verify the ID Card (with a picture) and the person
Sorry, to all disturbed.
I realized that I am doing this in a wrong way.
I am new to the forum, how to take this back? Can i delete it? Or the
administrator delete it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20861t=20768
could you give me a default configuration(an example config)?
I will config a netscreen5 firewal next week
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20862t=20862
--
FAQ, list archives, and subscription info:
speaking of ID... i've taken a couple of tests at different prometric
testing places in melbourne, australia,
and not one of them has asked for any ID. i havnt had to sign anything or
give any information etc, so it would be incredibly easy to obtain a nice
shiny certificate with your own
I compiled all the cute IPX network names people sent me and am providing
them here for future reference. I know we don't see much IPX anymore, but
it's still fun to reminisce about our youth...
1DEA (idea), 82FA57 (ate too fast), ACE5, AD, AD0 , AD0BE, B00B00, B0D1CE
(bodice), B0D1ED (bodied),
Well I haven't taken a Cisco exam in a while but I have taken 7 Microsoft
exams in the last 3 months.
At the beginning of each exam there were two surveys to be completed. One
for Microsoft and how much experience/studying/training you did/have. And
one for Prometric. Of the Prometric
Dear ..
There is nothing wrong in what info you have provided.Please keep on posting
the questions so that we are able to find right answers.
so go ahead and post as many questions as you have.
-Original Message-
From: ou henry [mailto:[EMAIL PROTECTED]]
Sent: Sunday, 23 September
'debug dialer' should show you what is initiating the call.
'show dialer' may also show you.
JMcL
- Forwarded by Jenny Mcleod/NSO/CSDA on 24/09/2001 02:11 pm -
Sean
I strongly recommend two books
1. the CiscoPress BCMSN textbook
2. ExamCram ** the Alert part of each chapter is very useful **
Most questions focus on Vlan, trunking, VTP and some simple IOS and set
based commands, remember characteristic of each switch model because you
have to choose
Hi,
It would seem the ID bit is largely dependent on the person running the test
site. I have always had to provide evidence of who I am. I have even been
known to the person in the test site but still had to provide the evidence
so it could be ticked off as sighted.
Teunis,
Hobart, Tasmania
when i got to do my tests they always ask for my ID, and they even right
down licence numbers
etc on their schedule paper as verification.
-Original Message-
From: Tony van Ree [SMTP:[EMAIL PROTECTED]]
Sent: Monday, 24 September 2001 2:56 pm
To: [EMAIL PROTECTED]
Subject:
Hello Everyone,
Well I have recently came to know such a case from Pakistan. I know a person
who is from there and hold a degree of CCNP. Well I completed my CCNA in
January and this is really amazing that the guy knows nothing as when it
came to implementation. Everytime he goes back to refer
Dear all,
i would kindly ask you to help me with my following question:
i would like to use tacacs+ for user and password authentication, changes
of passwords
every month, accounting, etc.. on each router
we currently using about 300 routers at the moment and growing
Could somebody
typo that should be write. was a bit busy. :)
when i got to do my tests they always ask for my ID, and they even right
down licence numbers
etc on their schedule paper as verification.
-Original Message-
From: Tony van Ree [SMTP:[EMAIL PROTECTED]]
Sent: Monday,
56 matches
Mail list logo
