9/9/2002 2:22amMonday
Has anyone ever done this ? I was able to break in to it @ bootup & it
looks amazingly like a cisco router but I cannot figure out how to do it.
Marconi's web site is actually more usless than Nortel's !!!
Thanks,
Richard
//
Message Posted at:
http://www.grou
9/9/2002 2:22amMonday
Has anyone ever done this ? I was able to break in to it @ bootup & it
looks amazingly like a cisco router but I cannot figure out how to do it.
Marconi's web site is actually more usless than Nortel's !!!
Thanks,
Richard
//
Message Posted at:
http://www.grou
Well I had an early Cat6k with Sup1 and a software bug which caused the L2
CAM not to populate. Simple software upgrade resolved the problem, been too
long for me to recall which CatOS version that would have been. I doubt
that's what you're facing, but since you asked for examples :-)
Fir
Hi Hitesh,
I feel this traffic could be the replication traffic between the two Win2K
server. What are the nature of the two servers?
Also if possible edit and paste the output of the sniffer. This would help
us decipher what is actually happening.
Do you get any such statistics in traffic from A
Is this worth it tobe a core L3 Switch?? what else you guys could
recommend?..i got 50meg local traffic(internet)!
many thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52916&t=52916
--
FAQ, list archives, and subscriptio
Hi... I was checking my syslog server and found that one of the switch's
port keep changing states to up and down as shown below?? May I know what
is the cause for this? I am sure we didn't plug out the cable at all. By
the way, what is 27W5d??
Sep 9 16:11:59 50.100.165.248 12051: 27w5d: %L
Hi Sim,
Port flapping can occur due to duplex, speed mismatch or some other
reason.
Check the duplex, speed of the port and the settings on the machine
connected to the port Fa0/18
Check if there is an STP loop i your network
When did this link flapping start?
Show port will show a lot of inf
Hi Chee Tong
27W5d means that the switch is up 27Weeks and 5 Days. I had a problem
similar to this and what I did to resolve it was to make sure that the
Switch was hard coded to a port speed instead of Auto.
regards
Derek
- Original Message -
From: "Sim, CT (Chee Tong)"
To:
Sent: Mo
Howard C. Berkowitz wrote:
> At 8:56 PM + 9/8/02, Chuck's Long Road wrote:
>>http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#45 )
>>it would be possible for there to be IP phones. However, and again checking
>>CCO (
>>http://www.cisco.com/warp/public/625/ccie/certificati
Hi all..
Thanks a lot for your great information you provide me..Wish me a luck
Kind regards..
Marwa Ismail
-Original Message-
From: Marwa Ismail [mailto:[EMAIL PROTECTED]]
Sent: Sunday, September 08, 2002 10:13 AM
To: [EMAIL PROTECTED]
Subject: CCIP Cisco press [7:52878]
Hi all..
How would I setup my ethernet interface, on my cisco 2500 running IOS 12.06,
to grab it's ip info from a dhcp server, or is this impossible?
-Jason Yates
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52922&t=52922
--
FAQ, list
Have a look here. The quickest fix is to change the ARP timers to 180
seconds. This will be less then the 5 minute CAM timers.
http://www.cisco.com/warp/public/473/62.shtml#casestudy8
--
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
> -Original Message-
> From: Hitesh Pathak R
I'm not clear on what you're asking: Is a $100,000-$500,000 switch
worth it for 50MBps of Internet traffic? Retail price on a single
Sup-II + MSFC2 + PFC2 is just about $40,000. Add in power supplies,
fabric modules, chassis and blades - price goes up quickly.
Do you need the redundancy or wou
Yes it is possible.. I think you are talking about autoinstall. You
need at least 12.1(5)T for this.
hth,
Mark
> -Original Message-
> From: Jason Yates [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 9 September 2002 22:27
> To: [EMAIL PROTECTED]
> Subject: dhcp client cisco 2500 [7:52922]
>
I don't know about autoinstall, but version 12.2.x will support DHCP... I'm
using it to grab my IP from my Cable Provider.
Rob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52926&t=52922
--
FAQ, list archives, and subscriptio
We have many customers doing just that, what is your question, it's
hard to ascertain from your post?!?
Dave
sisco wrote:
>
> Is this worth it tobe a core L3 Switch?? what else you guys could
> recommend?..i got 50meg local traffic(internet)!
>
> many thanks!
--
David Madland
CCIE# 2016
Sr.
The following mail can't be sent to [EMAIL PROTECTED]:
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Web. True or False
The file is the original mail
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52928&t=52928
--
FAQ,
Hi
Passed the CCDA exam today. Passed with the highest mark I ever received for
a cisco exam. All I can say for prospective exam-takers ... is don't take
anything for granted. I didn't and felt sorta relieved with myself that I
actually didn't bother to really follow the new exam Guideline List.
I like the event notifications of Network Performance Monitor better. It
allows you to get them by interfaces going up/down as opposed to the entire
router. However, the What's Up network mapping feature is nice.
In any case, Network Performance Monitor is one of a suite of tools that are
all pre
Hi,
Just a small comment: The passing score for MPLS is 867
Do you think IP Quality of Service is enough for the QoS portion?
Does it contain really good stuff for the real world or further reading
is needed to master QoS?
Regards,
Yasser
>From: "Lars Bucher" > >hi > >to prepare i used t
Hi,
Since I didn't get reply for the earlier one, Sorry to resend it again:
I am using a router 7500 with ATM interface to manage an ATM device.The
management s/w is run from a Sun solaris 2.8 .Each of the packet size is on
an average 160 bytes.The device can be configured for managing on LAN as
YASSER ALY wrote:
> Do you think IP Quality of Service is enough for the QoS portion?
Take a look at the Q Book:
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/index.htm
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/qcfbook.pdf
Comparing
Hi,
I need an SJ date between 10/28 and 11/3. If you have
a date available, and don't quite feel comfortable
with Token Ring, IPX, and IGRP, then I have a 11/18
date in SJ to offer you (these topics, among others,
will be dropped on 11/4).
Please email me directly.
Thanks!
Eddie
Hi, I would like to ask everybody what mechanism you suggest in order to
reserve a fixed amount of bandwidth within a serial interface?
I was checking class and policy maps and I also notice de bandwidth and
priority commands but I would like to ask anyone who has done this
configuration before. T
hi group
To a person that does not have much voice background, which is a better
course to take, the CIPT or CVoice? I need to write the several Voice
Specialization test eventually. And how about the unity course? is that any
good?
__
I had a similer experience, I showed up to the exam and was suprised by the
vagueness by the first 10 or 15 questions. I reset my brain to using the
test as a study preperation to come back the next day and focused on picking
answers that felt good subconciously. There was way too much Token Ri
Hi
Ok, then the mpls passing score must have changed ;-) (817 was in March,
2002)
Actually, the IP Quality of Service book is one of the weaker ciscopress
books (I would describe it as chaotic) and doesn't cover all topics from the
blueprint. However, I managed the exam with just this book plus
hard code the port speed and duplex on your switch
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
""Sim, CT (Chee Tong)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi... I was checking my syslog server
Thats the book I used when I passed. I also had lots of hands on with QoS,
and that always helps.
I would buy both available cisco press books regarding MPLS if you choose to
go that path. I also did the Optical Elective. That was very very hard,
good luck on that road.
---
A search on Amazon for Cisco and QoS turned up two books that will be
published in Dec '02 and Jan '03. Most likely they will be closer to the
course material.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52940&t=52878
--
FAQ,
Richard,
Once the switch boots up you should be able to use the AMI
account to get in without a password. It's a whole lot like the C5k on
bootup and password recovery. You just need to use the account AMI on
login.
Nigel
>From: "nettable_walker" >Reply-To: "nettable_walker" >T
I was playing around on the Configurator this morning pricing out a design I
am doing and saw Cisco is now offering the 4507R. Its a 7 Slot 4006 set for
Redundant Supe's. Looked wild but I am going to wait on sticking it in my
designs until they work out the bugs...
Any thoughts?
---Michael
Has anyone used the router simulation software from RouterSim? Just wanted
some feedback.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52944&t=52944
--
FAQ, list archives, and subscription info: http://www.groupstudy
Hey List,
If I was to swap lab dates with someone, how would we
go about it in a "secure" way? That is, a more
reliable way than just "timing" it to do it via the
online interface.
I was looking on Cisco's site, and I could only find
email correspondence for any CCIE-related questions.
Is ther
I tried to install Callmanager 2.4.5 on a Windows 2000 Server with SQL
Server 7 (upgraded to SP4). And when I launch setup, it says that I need
Service Pack 4 at least for Y2k updates. What does it mean ? Service Pack
for what ?
thanks for help.
--
Stephane LITKOWSKI
Student in a French computer
It kinda seems like a little 6500. I don't know that it will be too
bug riddled though, nothing radically new here just some of the features
of it's big brother.
Question is how do I justify getting one in the lab!!
Dave
Michael Greenbaum wrote:
>
> I was playing around on the Configurato
Look on the Windows/Microsoft Web site for Windows NT4 Updates Service Pack
6A (its a lot of updates for Windows NT). Install the service pack re-boot
the machine, install Callmanager and Voila!
Karl
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Steph
1) CIPT is very product specific, relates almost entirely to Cisco Call
Manager
2) CVOICE is Cisco VoX; dial-peers, VoIP, VoATM, VoFR, some QoS, some minor
VoIP hardware product knowledge.
3) IPTT is all about troubleshooting CIsco IPT products (CCM, Unity, VoIP)
4) DQoS is all QoS, inside and out
Stephane,
CCM 2.4 was designed for Windows NT 4, and so you may be getting a bogus
error. I believe it is asking for Win2k sp4, but I don't think there is a
Win2k sp4 yet, they just released sp3 a few weeks ago.
If you are attempting to learn Call Manager, I wouldn't waste my time with
CCM 2.4 i
Intermediate Distribution Facility.
Usually where your Access Layer switches reside.
Jeff
- Original Message -
From: "Tunji Suleiman"
To: ;
Sent: Friday, September 06, 2002 5:02 AM
Subject: Re: network design question [7:52762]
> Hi Jeff Duchin, pls what's IDF?
>
> Regards
>
>
> >Fro
Hi everybody!!!
I have a simple question, what techniques can I use in order to configure
bandwidth reservation in serial interfaces?
I want to match an extended access list, representing the interesting
traffic.
What I want to do is to reserve a minimun bandwidth for this customer, even
if the se
Greetings guys,
Is it possible to find out if an area is partitioned by using OSPF
commands?
Thanks...Nabil
"I have never let my schooling interfere with my education."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52955&t=52955
-
hy here are the cisco statement.
Regards Philipp
ipx hold-time eigrp
To specify the length of time a neighbor should consider IPX enhanced IGRP
hello packets valid, use the ipx hold-time eigrp interface configuration
command. To restore the default time, use the no form of this command.
ipx hold
I haven't actually done this in production, but at various times when
testing, I have noticed that if you have multiple dialer strings on the one
dialer interface, the first string will be dialled, and then if that fails,
the second string will be dialled, and so on.
I suspect that what you want t
i'm planning to build my home lab, does any one know how can i have a
"comm-server" : from which i will be able to access to all lab devices?
thx in advance
Mounir
CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52958&t=52958
---
It's not specific to ISDN.
By default, when you do a "show int", you will see a "5 minute input rate"
and "5 minute output rate". The load figures are calculated over five
minutes (I believe it's an exponentially decaying algorithm or something
similar, not a straight average).
These load figur
Hey,
All you need is a 2511 with 2 octal cables and you are on your way...
""gnaoui"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> i'm planning to build my home lab, does any one know how can i have a
> "comm-server" : from which i will be able to access to all lab devices?
Hi Group,
i am having problems to solve the following scenario.
kabelmodem-(E0)router2501(E1) -
witch - win2k-pro (private address range)
( internetaddress )( using
- win2k-server (private address range)
i w
Ok guys I am on my last leg with this one I seen a ton of examples but
can't seem to get it working what am I doing wrong here.
All I want is my internal users to be able to ping through the firewall
to the net, but external users not be able to ping.
Here is the last example I used that does no
Tim, Stephane,
We had the same problem when installing CCM 2.4.5 on our Win2k server
in the Academy lab. It appeared that the installation aborted when it
gave us the message about the Service Pack, although it may only have
been a warning / bogus message, not an abort. In any case, we're going
t
Andy,
This is a problem for Q Man! (whoever and wherever he is)
But seriously, maybe we could work this one out on the list.
May I suggest that you use the "modular QoS CLI". This involves
three steps:
First, classify the packets using ACLs and the class-map command.
Second, apply actions to the
Are you applying it to the incoming traffic or outbound traffic?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Elijah Savage III
Sent: Monday, September 09, 2002 5:33 PM
To: [EMAIL PROTECTED]
Subject: Internal Users ping through a PIX [7:52962]
Ok gu
What is on your internal interface access-list wise ?
Do you have an access-list 101 permit icmp any any echo ?
You must permit the ICMP echo through the inside, and the echo-reply through
the outside...
Thanks
Larry
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECT
My opinion is that if you have to choice only one between CIPT y CVOICE
, could be more conveniente to take CIPT due to IP Telephony (CallManager,IP
Telephones, Gateways ,etc )is a field with more perspectives of future
expecially thinking that is cheaper than PBX , more ductile and largely
deploy
The access-list is correct. There is something else that is going on.
Use "debug icmp trace" to troubleshoot...
How do you test this access-list? What are you trying to ping?
-- Lidiya White
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Elijah Savage I
Hi.. I have a catalyst 5505 switch and I had type in the following command
set logging server 100.100.100.10
set logging server enable
set logging server facility LOCAL4
set logging server severity 7
But it end up with the following config. I don't know why it has so many
entries. Be
Hi.. sorry me again, I found I can log to my syslog server now, but I want
to know when I change a port from speed 100 to auto, the syslog server only
record part of the log as shown below, it doesn't record port2/8 speed set
to auto ?? why ???
Cat55-L7-1> (enable) set port speed 2/8 auto
2
57 matches
Mail list logo