Hi all,
Anyone have an idea for USB Console??? As you know a new
model of Notebook PC already cut Serial Interface out. What are we going
to do without Serial? Anyone have an idea? Or Cisco will put a new USB
console port on there Equipments? (^-^) Wanna get yours idea..
Cheers
A
Hi.. May I know what is difference between sh process and sh memory? My
vendor told me my router is short of memory due to high usage. Then I tried
to use sh memory and sh process to check it. Which one is correct. Why sh
memory show that memory usage is quite high but sh process show that t
Hi.. I have set up the access server AS2509-RJ for remote dial in and I had
configured username for authentication (as shown below). But the logging
only show the access server had been accessed but not showing who had
accessed it. What command should I use to turn it on?
cisco AS2509-RJ
> "What configuration problem on a host computer can disallow a router from
> maintaining its entry in an arp cache - even though the host is active?"
***Strange problem. Two things come to mind. Duplicate IP of the router on
the 100.100.100.x network. The server is arping for the router and ge
If the 3524 is like the 2950 then you just assign the interfaces to the
VLAN's directly.
For example:
Sw(config)# int fa0/5
Sw(config-if)# switchport access vlan 10
Sw(config-if)#int fa0/6
Sw(config-if)# switchport access vlan 10
and so on.
You don't create the vlans separately.
BTW, when you cr
Since the MPLS and VPN Architecture book is not good, which book do you
think is good for this MPLS exam? How about Advanced MPLS Design and
Implementation by Cisco Press??
Thanks.
Larkin, Richard wrote:
>
> I used the book you are referring too and have failed twice. I
> have now gone
> ou
Only the management interface on a 35xx ( or 29xx ) can be active.
Remember this switch doesn't have true layer 3 capabilities, it just has a
layer 3 address for management purposes.
To switch management interfaces, which is the switch's active vlan , go into
the VLAN and type Management.
Thanks
Hi John,
The VLAN Interfaces on the 3500/2900 XL series are
management VLANs only and there can only be one up at
a time.
--- John Brandis wrote:
> HI All,
>
> Got a strange problem on a 3524xl switch.
>
> Problem: Need to create 2 VLANS . I issue the
> statements
>
> interface vlan 1
I used the book you are referring too and have failed twice. I have now gone
out and bought the Sybex MPLS book and will have another go once my collegue
has finished with it. The answer is definitely no - the book is not enough -
it only takes a handful of questions to get wrong and you're a gone
That would be nice but we have over 400 switches any several LAN admins who
could t'shoot hubs
but know they need minimal configuration control for t'shooting.
-Original Message-
From: nettable_walker [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 20, 2002 11:37 AM
To: [EMAIL PROTECTE
You'll be OK. The old 640-504 exam and the new 640-604 exam cover the same
topics. The only difference that I know of is that new, more difficult,
questions were written for the new 640-604 exam. Same topics, just more
difficult questions. Just make sure you know the material.
Shawn K.
> -Or
HI All,
Got a strange problem on a 3524xl switch.
Problem: Need to create 2 VLANS . I issue the statements
interface vlan 1
ip address 10.64.18.250 255.255.255.0
no shut
interface vlan 2
ip address 10.64.19.25 255.255.255.0
no shut
However, when I run "sh ip interfaces" , I see that o
Not that I know of. The timestamp of the file but it
might not be accurate. You could set up a proxy on
your PC that logs HTTP traffic I guess. You could also
sniff HTTP, etc all the time... be really out of
control but...
It seems like internet access is becoming more like a
police/big-brother t
one last thing to note, is that mixed mode nm's (ie: have both wan and lan
capabilities) are NOT supported on the 2600's
-Original Message-
From: Ian Henderson [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 19, 2002 11:18 PM
To: Steve Boer
Cc: [EMAIL PROTECTED]
Subject: RE: Please h
As Steve pointed out, I had a brain-fart. The NM-1E2W does not work
with the 2600 series.
You can, however, get a NM-1E, or an NM-4E 10BaseT module for the 2600,
and then use its (the 2600) other WIC slots above the built-in
Ethernet/FastEthernet interfaces for WAN connectivity.
My apologies fo
YOu need to bridge IPX and AT. They call it fallback
bridging but it's configured the same as regular
bridging was...
--- Robert Edmonds
wrote:
> Diego,
> I don't think the 3550 supports IPX at all. I have
> checked Cisco's web
> site, plus I have a 3550-12G on my network and I
> can't find any
I'm trying to provide access from the internet through a router to an ftp
server on a private network... this is part of the config I have so far:
ip nat inside source static tcp 192.168.6.2 21 interface Ethernet0 21
Ethernet0 has the global address and 192.168.6.2 is the ftp server on the
priva
On Fri, 20 Sep 2002, Steve Boer wrote:
> 1e2w's would be for use in 3600 series routers, and are NOT compatible in
> 2600's. They include 1 ethernet port and 2 wic slots. In these WIC slots,
> you can use any of the wics that are out there (wic-1t wic-1dsu-t1 wic-1b,
> etc etc), but are blank unt
Thanks for your valuable advice!
Did you use MPLS and VPN Architecture (CCIP Edition) by Cisco press to
prepare for your MPLS exam?? If the answer is YES, Do you think the material
of this book is related to the actual exam?
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=
hey guys, thanks for all the great replies.
I called cisco a couple days ago, the woman I talked to was clueless.
The only info she said she could reveal if given a serial # is if the
warranty is still valid. She couldn't reveal the original purchasers for
confidentiality reasons. When I asked i
AT&T
http://www.business.att.com/products/productdetails.jsp?productId=ehs
""sam sneed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I know its off topic but hopefully someone on this list could help.
> I'm looking to host 5-10 sites with someone. My problem is that webhsot
The 1E2W Module refers to a NM-1E2W Slot module that fits into the
2600/3600 series routers... and it has an 10BaseT port integrated. The
2W refers to the fact that you could put 2 WICs (WAN Interface Cards)
into it, and if I'm not mistaken, you could put 2 WIC-2Ts into that
NM-1E2W Module.
It w
9/19/2002 9:40pm Thursday
You could just tell your LAN admins not to change anything on the switches.
""Newell Ryan D SrA 18 CS/SCBT"" wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Evening group,
>
> What I have a TACACS server and the setup we are trying to achieve goes a
Yes. The Cisco website has a section that allows you to check CCIE status.
You need the person's name and their CCIE # to verify it. As for the CCNP,
I haven't heard of anything to check this status.
Shawn K.
> -Original Message-
> From: Han Chuan Alex Ang [SMTP:[EMAIL PROTECTED]]
> Sen
Here is a good starting point to read up on..
http://www.cisco.com/warp/public/107/nm-e2w.shtml
NM-1E2W has an 'onboard' 10BaseT interface.. also, you have 2 WIC
options so you could install a WIC-1T or WIC-2T or a combination of
both..
hth,
Mark.
> -Original Message-
> From: L [mail
1e2w's would be for use in 3600 series routers, and are NOT compatible in
2600's. They include 1 ethernet port and 2 wic slots. In these WIC slots,
you can use any of the wics that are out there (wic-1t wic-1dsu-t1 wic-1b,
etc etc), but are blank until populated with modules.
hope this helps
(c
hi, I am currently preparing for my CCNP module , however , the course that
I took which is Building Cisco Multilayer Switched Networks (BCMSN) was
quote as 640-504 and the exam I am taking now is
640-604, can any body tell me if there is any significant different between
the two. thanks
Message
hi, everyone , is there any way to verify if it is true if a person claimed
he has a CCNP or CCIE certification ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53666&t=53666
--
FAQ, list archives, and subscription info: http://ww
I would not use these guys for hosting because of their mail servers.
Their mail servers are listed on the dns black mail list. For those who
may not know this means that their mail servers were used as open relays
at one time and I have discovered from time to time it happens to them
so they can'
Hello,
I oftern see on selling posts that some routers comes with 1E2W module. Is
this referring to the on-borad built in interfaces?? With the 1E2W, would I
need any extra modules (like WIC-1T or WIC-2T) to use the 2W, or can it be
used for connecting serial cables striaght away?
Sorry for my
I use www.readyhosting.com for a couple of my sites for the last 2 years.
Site is fast, lots of features, mail server lags once in a while but other
than that seem pretty decent.
$100/year which isn't bad either.
Check out www.cnet.com for web hosting comparison charts too.
cheers
""sam sn
How many simulation questions are there in the exams 640-60X ?
Are they (simalation questions) always present ?
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53662&t=53662
-
Evening group,
What I have a TACACS server and the setup we are trying to achieve goes as
follows:
I want the LAN admins to have minimal control on there switches in there
area. We have
accomplished that one the vty ports. Here is the config:
Server
user=test
password=test12
service-shell
set
I guess you'd need to have someone from outside claiming that the traceroute
is blocked
to actually send you the output of the trace, it should show there :-)
On the other hand, you might want to try it yourself from other networks.
Go to www.traceroute.org, pick a route server/looking glass and
I don't know if there will be a 3rd edition. However, the 2nd edition is
still an excellent book for many of the topics covered on the old and on the
new CCIE Written 350-001 exam, which are also covered in the lab. It is
worth picking up for your library.
Shawn K.
> -Original Message-
>
I am having a problem with a blocked port somewhere on the internet down to
my router, my ISP is denying any blocking from their side, is there is any
way to know where exactly the port is blocked?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53657&t=53657
-
personally i swear by service www.internetconnection.net
they have always had great pipes, with lowpings, and I have hosted
two adult sites there since 1999.
I am currently moving my new site, www.networkedfilms.com there by the end
of the month, from register.com.
They offer all the features y
Does anybody know if Caslow's book Cisco Certification: Bridges, Routers and
Switches for CCIE's is going to be updated for new CCIE topics in a 3rd
edition? And if so when it will come out? Is the 2nd edition good enough?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53654
I have closed the security and done some clean up. I'm investigating the
performance to Mexico but pings have been well today. Coincedence? Probably
but they've never been consistently low as they have been today. Tomorrow I
have some available to pull the suspected trouble connection and I'll log
There is new material (for example, two new topics that are covered heavily
now are MPLS and QoS). The test is very different from the old exam. While
there are a lot of similarities between the old blueprint and the new
blueprint, new questions have been written. I can't recommend any updated
boo
I know its off topic but hopefully someone on this list could help.
I'm looking to host 5-10 sites with someone. My problem is that webhsoting
companies go bankrupt overnite lately.
Even the decent size ones, XO for example. Does anyone know of a decent one
that will be in business longer than a y
Especially know the 766 router and what ports are included on it . Also,
since the 700 series has been discontinued, you may want to look over the
800 series, which are taking the place of the 700 series. Know the 1600
series routers, as well. Don't forget product positioning (700/800 - SOHO
and T
The 3550 doesn't support desktop currently and I reasonably sure there
are no plans for their support but then again the cat4000 was not
originally going to support IPX but no it does, kinda!!
Dave
Robert Edmonds wrote:
>
> Diego,
> I don't think the 3550 supports IPX at all. I have checked
That's a good point. In the real-life version of the story this user is
on Road Runner broadband and I don't think they're using proxies. If
they are, that might be a good place to start but it would probably be
difficult to get that information from them.
Thanks,
John
>>> "mike greenberg" 9/
question regarding the written ccie exam:
the test changed to 150 questions, and is significantly different from the
old blueprint. I was wondering if the blueprint actually reflects the test,
as I have been told the test has no new material, just more questions. (my
company won't reimbuse for
KR,
The resolution for the VPN MTU size is usually pretty simple. There should
be an option within the VPN to lower the MTU size of the VPN encrypted
packet.
This can either be in the form of a VPN client used to connect, or within a
Point to Point Tunnel endpoint configuration.
You just need to
If I understand your question correctly, you just need to enable NAT for the
server in question and allow FTP traffic through on that address. For
example, Server1 is the FTP server you want to allow people on the outside
to access. It's private IP address is 10.10.10.10 and the outside address
I'm not an expert on this, but it seems to me that if you don't have a local
database or an external server, you don't have any user names to
authenticate against. I think you'll need something else.
""exchange"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey,
>
> is there a
Diego,
I don't think the 3550 supports IPX at all. I have checked Cisco's web
site, plus I have a 3550-12G on my network and I can't find any IPX
commands.
""Diego Rissone"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anybody know if the ios of the 3550's supports or wi
Does anybody know if the ios of the 3550's supports or will support ipx ?
and at?
thanks
Diego Rissone
CCIP,CCDP,CCNP,MSCE+I
TECHINT GROUP -ARGENTINA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53642&t=53642
--
FAQ, list
The answer is yes Your company may be running transparent proxying so
that
everything that you do and places that you visit will be "cache" at the
proxy server.
Where I work, we use "squid" to cache Internet traffic and maintain a log of
what
and where "internal" users visit... Internal users
The solution is also a simple one. Behind the Pix firewall, I am running
a "linux"
load-balancer (i.e. virtual IP address). I have 4 streaming servers
(192.168.1.101-192.168.1.104) and they use the 192.168.1.100 VIP address
The linux load-balancer handles the load-balancing part Aga
Thank you, moving to the other subnet allowed me to get back in to the
router.
Ok, now for another crack at it ;-)
Very much appreciated!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53639&t=53266
--
FAQ, list archives, and sub
Hi all,
Whilst testing SMTP NAT through a PIX 515e with SMTP fixup enabled, the
performance is unusable. If I turn of SMTP fixup it is really fast.
I can;t find anything about this being an issue in 6.22, anyone seen this
problem?
Cheers,
Symon
Message Posted at:
http://www.groupstudy.
You absolutely need that route statement in the Mexican router. What I was
suggesting is that you remove that ip address from the FastEthernet 0/1
interface of the Mexico router. It is no longer used in that router and
might cause confusion.
Most likely your local workstation is on the 192.168.100
Hi Avnish,
I have asked the same question a while ago. Looks like they are not too keen
on wanting to know all the commands but put more emphasis on the
understanding of the different profiles and what features are supported. The
ExamCram book says the same btw, so don't get your head burning wit
According to a couple of co-workers who are more knowledgeable about Windows
than I am, it would not be possible to find out from the desktop itself once
the history and Temporary Internet Files have been cleared (they note that
the
information *may* be stored in a cookie, but it's not likely).
>
Let me firmly advise you against talking to Cisco about stolen
equipment.
There is a huge theft ring operating in the Bay area right now -
mostly they defraud honest broker/dealers with dumpster grade gear but
they have previously been involved in a variety of corruption - drugs
for hot equipme
I am planning to take BCRAN exam next week. I had a question regarding
700 series routers. Do they still have question related to 700 series
routers on exam ?
Thanks
Avnish
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53634&t=53634
-
Regarding my previous post, also assume that for whatever reason the
History files are inconclusive or that they've been cleared out, as
well. So, the question boils down to this: Is there a way to verify
where a file came from and when it was downloaded via IE if the cache
and history have been
Here are some documents that are useful. "Cisco ISP Essentials" is also now
in book form from Cisco Press. ISBN 1587050412
Secure IOS Template by Rob Thomas
www.cymru.com/~robt/Docs/Articles/secure-ios-template.html
Extremely good. Know what you are doing before using. You'll want to get:
www.ia
Here is my 804 from home:
Dave
dave804#sh conf
Using 1143 out of 8065 bytes
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname dave804
!
enable password cisco
!
username as5200in password 0 madman
!
ip subnet-z
That might be an option. I'll have to see if this guys firewall logs
that sort of thing. If he uses a firewall like mine, it won't log
'allowed' traffic.
Thanks!
John
>>> Daniel Cotts 9/19/02 9:12:35 AM >>>
How about the syslogs from the firewall or Internet gateway router?
> -Original Me
Hi,
I removed the "ip http server" from all routers.
I also removed the "ip nat inside" from the first Mexico router.
So far so good.
But when I did a "no ip route 192.168.100.0 255.255.255.0 Serial0/0:0.300" I
immediatly lost connection to the router and am now trying to reach someone
down there
How about the syslogs from the firewall or Internet gateway router?
> -Original Message-
> From: John Neiberger [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 19, 2002 9:30 AM
> To: [EMAIL PROTECTED]
> Subject: OT: Windows and Net Behavior Tracking [7:53620]
>
>
> I now, that's
Daniel Cotts wrote:
>
> You have a static NAT translation for 192.168.100.20 on both
> routers. I'd
> suggest removing it from the Mexican router.
>
> You haven't said whether or not you are doing standard or
> extended pings.
> Whether you are pinging from a host or the routers.
> Do a tracerou
Daniel Cotts wrote:
>
> You have a static NAT translation for 192.168.100.20 on both
> routers. I'd
> suggest removing it from the Mexican router.
>
> You haven't said whether or not you are doing standard or
> extended pings.
> Whether you are pinging from a host or the routers.
> Do a tracerou
Stuart-
Boot up in ROMMON and tftp a newer version of IOS. Short of that, Call
TAC for a replacement ISDN WIC or a replacement Router.
My reason for booting up in ROMMON is to insure the code for the WIC
doesn't get loaded, ensuring no interruptions while trying to upload the
new IOS.
What vers
When pinging to a device for the first time the first ping times out while
the last network device (router) arps for the hardware address of the host
(server). (I'm assuming that the server is at a remote location from you.)
The router should then maintain the ip to MAC translation in its arp tabl
Get the serial #'s and call TAC.
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Voice: 702-968-5100
FAX: 702-968-5104
""John Wright"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi guys,
>
> Just found th
I'm experiencing some strange connection issues when surfing the web through
a couple of our PIX firewalls, but not through our Checkpoints.
Seems while surfing some websites the pix decides to close the connection
before the last acknowledgement packet from the pc. Thus the pc resends the
packe
There's a huge market for used Cisco gear and the prices on the used market
are WELL below listI wouldn't worry about the equipment being stolen
unless the prices are well below the standard used price range. Go to ebay
and do a search of closed auctions for the items he's selling and comp
Does anyone have, by chance, a sample of a full config of an 802 isdn? I
looked at cisco and the other resources I have but can't find just sample
configs. I need to verify a couple of things I'm doing. Thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53622&t
Hey,
is there a possibility to set up a router acting
as a radius or tacacs server with local authentication
without external server ?
Please let me know
best regards
Michael
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53621&t=53621
---
I now, that's a bizarre subject line. I couldn't think of a better one
this early in the morning. :-) Here are the details...
Let's say I went to a website and downloaded a specific file, then I
subsequently cleared my cache. Once that is done, is there any way to
reasonably prove where I got
If you register the equipment for a Smartnet Service Contract, (in the past
you could do it by phone) they will let you know who was the previous owner
(assuming that the previous owner also had it on Smartnet.)
Maybe someone has the tel# for the Smartnet registration.
> -Original Message---
I am assuming that you only have this one service behind the PIX or do you
have multiple servers behind the PIX? I would like to see a config of
multiple servers behind a PIX - utilizing only "1" external IP address.
Tim
-Original Message-
From: mike greenberg [mailto:[EMAIL PROTECTED]]
I am having a curious problem with a 1720. When I enable the BRI the router
reloads ist config and locks me out of telnet as well. I changed the config
and saved but when I stuck the isdn cable in it reset the config to the old
one. Any ideas on what I can try here?
thanks
stuart
Message Pos
78 matches
Mail list logo
