route-map isn't listed as a command in the
documentation so it's probably something from full IOS
that isn't supported. They may add support in the
future.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/swuncli.htm#xtocid24
Unsupported route map commands on 3550 (lates
I did not realize I sent this post earlier.I must have fat fingered a key.
I apologize...
--
_
The harder you work, the luckier you get!
_
The only place success comes before
work is in the dictionary!!!
you sure it's coffee giving you that buzz, Eddie? You sent this same article
a couple of hours ago.
--
TANSTAAFL
"there ain't no such thing as a free lunch"
""Edwin R. Gonzalez"" wrote in message
news:[EMAIL PROTECTED]
> Hey,
>
> It's your friendly neighborhood CISCO MAN!
> Sorry, it's Fr
I concur
--
_
The harder you work, the luckier you get!
_
The only place success comes before
work is in the dictionary!!!
_
""The Long and Winding Road"" wrote in
message news:[EMAIL PROTECTED]
hi buddy,
Need information about the MRTG. can anyone tell me
from which site i can download, and wht is the
hardware requirment and any technical documentation
URL.
Thanks & Regards,
milind
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculator
Hey,
It's your friendly neighborhood CISCO MAN!
Sorry, it's Friday night, I'm still at work with a coffee
buzz that might last me until the morning.
I came across this article that might be of interest to
some people, check it out;
http://news.com.com/2100-1009-990608.html?tag=fd_lede1_hed
token ring stuff is going for very reasonable prices over on that auction
site we all know and love. might be a good way to add serial ports /
complexity to an existing rack. or start building a CCNA / CCNP study rack
just a thought
Message Posted at:
http://www.groupstudy.com/form/read.php?f=
Some riddles I need asnwers to:
I have two routers, R1 and R2 that are connected back-to-back through their
serial ports. They have the following basic config:
R1:
ip multicast-routing
!
int e0
ip add 192.168.100.1 255.255.255.0
ip pim dense-mode
ip igmp join-group 224.1.1.1
!
int s0
ip add 192.1
While reading Priscilla's book on Campus Area Network Troubleshooting, which
is an excellent book that I highly recommend, it and other sources state
that the Packet Error Rate should be measured for a WLAN. The problem is I
cannot find anything at a reasonable price to use to measure such a thing
LMAO
"the Bush Administration recently pointed to BGP as critical technology that
needs to be secured.
""The Long and Winding Road"" wrote in
message news:[EMAIL PROTECTED]
> ""Edwin R. Gonzalez"" wrote in message
> news:[EMAIL PROTECTED]
> > I came across this article about BGP earlier to
In my studies for the Cisco wireless test I keep running across the term
RSSI - Received Signal Strength Indicator. Is this something different from
just the signal strength in dBms as shown by most utility programs? For
example in the site monitor part of the Orinoco Gold card it shows the
signal
Go here:
http://www.cisco.com/kobayashi/sw-center/lan/cat1900.shtml
You should have a CCO account.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64126&t=64122
--
FAQ, list archives, and subscription info: http://www.groupstudy.c
Hi
I need help on this particular problem.
Here is the issue:
I have 2 3620 with Voice Module intstalled in each router, but no ATM Module.
I also have 2 7206 with ATM modules installed in each router but no Voice
Module!
The question is how am I going to do the Voice Over ATM lab without having t
""Edwin R. Gonzalez"" wrote in message
news:[EMAIL PROTECTED]
> I came across this article about BGP earlier today,
> check it out;
>
> http://news.com.com/2100-1009-990608.html
>
yada yada yada :->
the big point seems to be the misconfigured router incident, and it is
highly unlikely that any
The administrative distance of 5 is only significant on the local router
(R1) where you entered the summary-address eigrp command. The admin distance
is not included when advertising routes to other routers (R2).
If you do a "sh ip route 111.0.0.0" on R1, you'll see that it is a summary
route and
I came across this article about BGP earlier today,
check it out;
http://news.com.com/2100-1009-990608.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64123&t=64123
--
FAQ, list archives, and subscription info: http://www.gr
Hi,
Please help me to find out that from where can I get Catalyst 1900
Enterprise software as at the moment I am using Catalyst 1900 standard
software and it don't support CLI based interface at all and only works with
Menue based mode.
I will appreciate your co-operation.
Thanks
K A
Messag
do the above wrap at a certain number?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64120&t=64120
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viola
PBR is not available in current image.
I understand it will be available soon.
- Original Message -
From: "W. Alan Robertson"
To:
Sent: Friday, February 28, 2003 9:04 AM
Subject: Policy Routing on the 3550? [7:64074]
> Howdy folks...
>
> I need to set the next hop on a 3550 (with the E
you could use mrtg or SolarWinds has a utility that can record and graph
switch port utilization
""Sam"" wrote in message
news:[EMAIL PROTECTED]
> Is there any way to find out what kind of traffic is passing through a
> switch port in terms of input/output packets?
>
> Or some kind of historical
fyi
Revision to Cisco Certified Design Professional (CCDP) program
The new CCDP program structure will reflect the latest developments
in network design and technologies incorporating converged networking
solutions.
http://www.cisco.com/warp/public/10/wwtraining/whats_new/ccdp/
Message Pos
Thanks! I was told a while ago that it was illegal, but I never bothered to
check for myself until recently. I need to start checking things out for
myself more, before I start forwarding emails about stolen kidneys and free
money from Bill Gates...
Geoff Mossburg
-Original Message-
From:
Ben,
I am not aware of any formalized training programs in the Denver area for
the written exam. However, I am organizing a study group with another
gentleman here in the Denver area specifically to tackle the CCIE written.
You are more than welcome to contact me offline if you are interested in
Well within the IOS you could generate topN reports detailing utilization,
errors, etc (usage: show top 10 utilization).
You could also use NGenius Realtime Monitor that comes with Ciscoworks 2000
or purchase it standalone from ngenius.com.
""Sam"" wrote in message
news:[EMAIL PROTECTED]
> Is th
Sounds like a quiz...
If one card is showing FCS errors and the other isn't, I'd replace the one
that is sending the bad frames: i.e. - Replace the card not showing errors.
FCS errors indicate that the received frames are not passing the frame check
sequence, so the sender of those frames is most
Another excellent book is Integrating Voice and Data Networks by Scott
Keaggy (CiscoPress). So far, that's my favorite VoIP book and much of the
book is helpful even if you're not using Cisco IP Telephony gear.
John
Angel Leiva wrote:
>
> Hi Kris,
>
> Try Configuring Cisco Voice Over IP, Secon
Hi Kris,
Try Configuring Cisco Voice Over IP, Second Edition by Callisma (Various
Authors).
Below is the URL to view the book's info. I am currently reading it. It has
lots of great information on VoIP matters.
In fact, Chapter 4 explains what exactly FXS, FXO or E&M interface ports do.
http:/
Why do you require all the groups I generally only define groups
when doing load balancing and HSRP otherwise the default works just fine.
Dave
rau ren wrote:
> I am configuring HSRP groups in the MSFCs of this SUP2. I am only being
> allowed by the MFSC to configure 16 hsrp groups. th
Try 'show counters (mod/port)'
Larry Puckette
Senior Network Analyst
Temple Inland/Austin Data Center
512/434-1838
[EMAIL PROTECTED]
-Original Message-
From: Sam [mailto:[EMAIL PROTECTED]
Sent: Friday, February 28, 2003 2:26 PM
To: [EMAIL PROTECTED]
Subject:Switch Port T
Kris,
In case you didn't get the newsletter...
=> On sale in February at ciscopress.com
This month we are offering selected voice titles at 15% off the list
price-and don't forget the free UPS Ground shipping on U.S. orders.
- Cisco Voice over Frame Relay, ATM, and IP (1578702275), $51.00
- Voice
Does anybody know of a good training program for the CCIE written especially
in the Denver Colorado area? All I'm finding is Lab prep stuff.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64107&t=64107
--
FAQ, list archives, and s
Thank you all for the replies, but I checked the duplex between them and
made sure everything was hard coded on both sides, there are no media
filters or anything in place just direct cross connect sc to sc fiber.
I appreciate the feedback.
-Original Message-
From: Priscilla Oppenheimer [
Is there any way to find out what kind of traffic is passing through a
switch port in terms of input/output packets?
Or some kind of historical traffic statistics?
Or if i could set up an smtp monitoring station.
Anything would do...i need some ideas
Sam
Message Posted at:
http://www.groupst
I can not make the administrative cost of eigrp 5; even if I use "ip
summary-address eigrp 1 111.0.0.0 255.0.0.0 5". When I read tutorials
about administrative distance, they say eigrp summary address has a cost
of 5.
Any Thoughts
R1
interface Serial0.12 point-to-point
ip address
Is there any chance there's a duplex mismatch? I doubt anyone uses
half-duplex on Gigabit Ethernet, so this may be a clueless suggestion.
However, that's the symptoms you would get. The side set to half would sense
someone else sending while it was sending, stop, backoff and try again. The
result o
I suppose if you're able to itemize deductions there should be no problem,
I do it all the time, that also includes books, any travel expenses related
to
taking the exams or improving my professional skills, buying the equipment,
etc.
As long as you have a prove, such as credit crad statements you
one of the "gotchas" of the 3550 IOS images.
There is no reference to the ip policy route-map command in the
documentation. Policy is not mentioned in the configuration guide.
I did check the "unsupported commands" section and did not see anything
specific. But I can say that there are commands t
There is no fiber running through a ceiling. They are sitting right next
to each other in the cabinets so a real short 3 meter fiber jumper is
being used.
-Original Message-
From: Larry Letterman [mailto:[EMAIL PROTECTED]
Sent: Friday, February 28, 2003 1:09 PM
To: Elijah Savage; [EMAIL
Mario,
That is correct. The NPE300 and above are keyed differently and won't seat
in
the non-VXR chassis.
Mark
> Can some one please tell me what is the fastest NPE processor capable of
> running on a 7206 Non-VXR router? I think it is the NPE-225 but just need
> confirmation. Thanks.
>
>
>
you are correct. The msfc-2 only allows 16 different hsrp groups.
We ran into that when we deployed sup-2/msfc-2 blades in our BB
and data Center gateways. Functionally it works fine having the
same group number..
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
Fr
dont they have an NPE-400 now ?
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, February 28, 2003 7:21 AM
Subject: 7206 non-vxr [7:64083]
Can some one please tell me what is the fastest NPE proc
Jim Dixon wrote:
>
> See this link for the answer.
>
> http://www.elischer.org/netgraph/man/ng_vjc.8.html
>
> Van Jacobsen compression
You might find even better links if you spelled his name correctly! :-) It's
Van Jacobson. The compression algorithm is documented in RFC 1144. The idea
behind
are there any fiber running thru the ceiling ?
I'd replace both ends of the 5500 hardware..
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
From: Elijah Savage
To: [EMAIL PROTECTED]
Sent: Friday, February 28, 2003 5:26 AM
Subject: FCS Errors between 2 5500's
check out AiroPeek QuickStart e-seminar by Wildpackets or just download the
demo and try it out, it might be what you want
www.wildpackets.com (but site appears to be having problems today)
""Greg Rend"" wrote in message
news:[EMAIL PROTECTED]
> Anyone recommend software/hardware for montioring,
Yep, and 128mb is the max mem...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, February 28, 2003 7:21 AM
To: [EMAIL PROTECTED]
Subject: 7206 non-vxr [7:64083]
Can some one please tell me what is the fastest NPE processor capable of
running on a 7206
I don't know about all platforms, but you CAN enter simultaneous configs
sessions on 2501 and 12000 routers, I just tested it.
What you cannot do is have simultaneous views of or writes to the
startup-config (NVRAM), if you try you get;
NCS_Test2501#sh start
%% Non-volatile configuration memory is
Kris,
The following will be a start for your goal..
Cisco IP Telephony by ciscopress - David Lovell
Cisco IP Telephony Network Design Guide
http://www.cisco.com/univercd/cc/td/doc/product/voice/ip_tele/network/
Cisco IP Telephony Solution Guide
http://www.cisco.com/warp/public/788/solution_guide/i
Go to www.arin.net and find out who owns the subnet. Then contact the owner
of the network.
Why did you put your e-mail as [EMAIL PROTECTED] Please correct your
signature.
Thanks!
Paul Borghese
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64090&t=64088
---
Steve,
Disregard question 1 part 3..LOL... I just read what the syopt connection
permit-ipsec does. (lets the traffice back out to vpn clients bypassing the
checking of ACL's)
Thanks again
- Original Message -
From: [EMAIL PROTECTED]
To: Steve Wilson
Cc: [EMAIL PROTECTED]
Sent:
You are looking to do a DNS look-up.
Example:
DNS lookup command issued. Waiting for reply...
Office host name: w14.www.dcn.yahoo.com
Internet address: 216.109.125.67
DNS lookup command completed.
If the DNS look-up does not work, look in to finding
someone with SolarWinds software. (Solarw
I use the following configuration to allow VPN clients to terminate on PIX.
Along with the usual rules about a firewall you need to create a "vpngroup"
which contains all the information that is passed to the client and an
access control list to list all the internal networks that the clients can
Hey Steve,
Thanks for the config I had a few questions if you don't mind?
1. This access list will only use the addresses you specified in the pool
"home"? These addresses will be assigned to VPN clients? This will also allow
all traffic back out to the VPN client?
access-list 110 permit ip
Hello, I have 4 routers, R1, R2 and R3 running Ospf and R1, R3 and R4
running
Eigrp. Mutual redistribution on R1 and R3 between Ospf and Eigrp.Is there
a neat and clean way to prevent Ospf routes coming back to Eigrp and
vice-versa? I was thinking the following:1st option: Use the distance
cmd.Set
>Dear All,
>
>I believe some one always try hacking my private network,
>I got the ip address and how am I check who they are?
>
>Please help...!! Thanks
>
>Rgds,
>Steiven
If they're being blocked at your firewall it may best to just leave
them alone. I don't know if it's very helpful to try to t
Finally a question i can help with...
goto http://www.uwhois.com
regards,
odus
Original Message Follows
From: "Steiven Poh-\(Jaring MailBox\)"
Reply-To: "Steiven Poh-\(Jaring MailBox\)"
To: [EMAIL PROTECTED]
Subject: Urgent Help !! How to check who's always attack my firewall
[7:
Can some one please tell me what is the fastest NPE processor capable of
running on a 7206 Non-VXR router? I think it is the NPE-225 but just need
confirmation. Thanks.
Thanks,
Mario Puras
SoluNet
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64083&t=64083
---
See this link for the answer.
http://www.elischer.org/netgraph/man/ng_vjc.8.html
mailto:[EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 22:16
To: Cisco Group Study; ccielab
Subject: Van Jacopson TCP/IP header compression (RFC 1144)
Hi group,
Does the Van Jacopson TCP/IP header compression
I am configuring HSRP groups in the MSFCs of this SUP2. I am only being
allowed by the MFSC to configure 16 hsrp groups. this SUP2 is an upgrade
for the MFSC SUP1s we have. in the SUP1s I have configured a total of 50
vlans, each with its own HSRP group. That is 50 HSRP groups
Here is m
Everyone,
I am seeking a recommendation on a voip book, preferably something that
explains the different types of technologies and how they can be applied
'in the real world'. Right now, we are doing some very rudimentary voip
stuff with a variety of routers, 1760, 2600, and a 3600 seriers which i
Greetings,
I wrote a very simple script which logs to a router, executes a
configuration command ( usually 'username xxx password xxx'), and exits.
It has been pointed out that if somebody else is in global command mode it
might be trouble.
I know that problems occur when two people try to edit a
I have heard, from a guy in this group, that the new client - will be
released in March - will solve this issue.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64078&t=63951
--
FAQ, list archives, and subscription info: http://www
Anyone recommend software/hardware for montioring, and deploying Cisco
wireless AP's? Talking around 10-20 AP's. -- Get your free email from
www.uymail.com Powered by Outblaze
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64077&t=64077
>From what I remember it is not possible for the 6000 family. But the MSFC
of the 6000 family can act as a RP for the 5500.
"Ken Diliberto" @groupstudy.com em 28/02/2003 05:37:56
Favor responder a "Ken Diliberto"
Enviado Por: [EMAIL PROTECTED]
Para: [EMAIL PROTECTED]
cc:
Assunto:
Howdy folks...
I need to set the next hop on a 3550 (with the EMI Image) based on the
protocol type. We've got a number of transparent proxy servers, each
one handling a different type of traffic (One for HTTP... One for
SMTP... Etc.).
No problem, right? Wrong.
Merrily, I configured my acces
I am not sure if I undertood your question.
You are not going to see RP information on the 6509. You are only going to
see it if the MSFC acts as a RP for a 5500.
"puro prasad" @groupstudy.com em 28/02/2003 05:14:30
Favor responder a "puro prasad"
Enviado Por: [EMAIL PROTECTED]
Pa
Go to ARIN.net. If it's outside North America, it will refer you.
Remember that IP address can be SPOOFED.
HTH,
Elmer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Steiven Poh-(Jaring MailBox)
Sent: Friday, February 28, 2003 6:36 AM
To: [EMAIL PROTECTED
All,
Last night I had to shutdown a gig fiber trunk between 2 5500's to run
on a 100M trunk we setup as a backup. The FCS errors are only showing up
on one side the fiber between the 2 cats were replaced but the errors
are still showing up. Which side would you all say you would replace the
fibe
Stuart Pittwood wrote:
> is it possible to give the ICA traffic priority over everything else?
Yes, but it's not all that clean. Looking at
http://crmr.hq.dla.mil/firewalls.html, the actual data connection uses a
random port. So probably prioritizing traffic to and from your Citrix
servers is
Hi all,
We have a 1Mb link between two offices,
90% of the traffic crossing this link is from Wyse terminals (remote) to
citrix servers (local)
is it possible to give the ICA traffic priority over everything else?
If so can someone point me in the right direction of how to go about
this
No2nd hand is work for me.
- Original Message -
From: "Troy Leliard"
To:
Sent: Friday, February 28, 2003 4:51 PM
Subject: RE: Looking for Used Cisco Equip's [7:64044]
> Are you looking for new or 2nd hand? (With warranty / support ? etc )(
> Cheers
> Troy
>
> Steiven Poh-\(Jaring
Try NSLOOKUP and WHOIS query . It will tell you either a costumer info or a
Service provider Block. If it tells you about
Service provider then you should contact this provider and send them a log,
let them know that one of there customer trying to hack into your network.
They will definitely take
Your AARIN / RIPE whois, that should tell you who the IP block belongs to
and where to direct abuse complaints!
Steiven Poh-\(Jaring MailBox\) wrote:
>
> Dear All,
>
> I believe some one always try hacking my private network,
> I got the ip address and how am I check who they are?
>
> Please h
You did not mention if you were trying to replicate across versions. I
found that if you tried to replicate from one version to another it came up
with the same errors you have mentioned. It looked to have started but not
produced the desired results. The documentation also states that you shoul
Hi Friends,
I am trying to configure a Cisco ATA 186/188 for a SIP session with a ITSP
without any authentication (with a particular dialing number say 1234
provided
by the ITSP).
Can any one guide me how to intiate the dialing , with what dialing sequence.
What should be the ideal configuration o
Dear All,
I believe some one always try hacking my private network,
I got the ip address and how am I check who they are?
Please help...!! Thanks
Rgds,
Steiven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64063&t=64063
--
FA
Dear All,
I believe some one always try hacking my private network,
I got the ip address and how am I check who they are?
Please help...!! Thanks
Rgds,
Steiven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64064&t=64064
--
FA
The following works on my cat4006.
Cisco Systems, Inc. Console Fri Feb 28 2003, 02:24:02
Enter password:
cat4006> enable
Enter password:
cat4006> (enable) set prompt eaglesfan> (press return key)
eaglesfan> (enable) set prompt cat4006>
cat4006> (enable) exit
Session Disconnected...
Cisco
Hi Masaru,
NAT inside to outside:
here the local ip address (any in the private ip add range, which is not
legal on the internet, eg: 192.168.17.1) used in ur local network, is
disguised by a public ip (eg: 202.24.23.22). this will allow the packet to
flow accross the internet even though the origi
Are you looking for new or 2nd hand? (With warranty / support ? etc )(
Cheers
Troy
Steiven Poh-\(Jaring MailBox\) wrote:
>
> Dear Groups,
>
> I'm looking below used cisco item, please look in to it and let
> me know asap.
> My location is Malaysia. Thanks
>
>
*
HI Tigers,
First things, are the interfaces in a administratively shut or are the
down|down ?
If admin shut, then all you need to do is do a no shut under each of the
interfaces you want to enable.
If you do that and they are now down|down or where orginally down|down, you
are not even getting a
The 5500 has an interesting feature that allows you to configure an MLS
RP to be another router (using the set mls rp command). Cool way to
move MLS (dare I say L3 switching) out from the core without adding more
L3 modules. (Anyone configure an MLS RP like this?)
Is there a similar feature on t
Try set prommpt "" or set prompt " " something like that .. :)
Eagles Fan wrote:
>
> is it possible to clear the prompt after manually setting it?
>
> _
> Protect your PC - get McAfee.com VirusScan Online
> http://clinic.mcafee.
I have got this working by configuring a VPN pool on the Pix, and assigning
these addresses to the vpn clients. IE your home pc will have an DHCP
address from your ISP, but also an "internal" IP address assigned from the
Pix VPN pool. The Pix sees traffic as going from your network to this
"intern
Hi everyone
the 'mls rp management interface' command is not to be seen on any of the
MLSRP interfaces. Could this create any problems. My setup:
Collapsed core lan switching network
two redundant 6509s at core,
4006 at access layer.
'mls rp management interface' given on VLAN1 interface on one of
sorry guys. I did paste a link on my post but no idea what happened.
I hope it works this time.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos
_c/qcfbook.pdf
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64053&t=64052
---
_c/qcfbook.pdf
People who are studying for ccie written will find alot
of usefull info on QOS.
Can anyone share a solid document on MPLS with me?
Regards!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64052&t=64052
--
FAQ, li
86 matches
Mail list logo