I have a home network which uses an ADSL line which is shared via Internet
Connection Sharing. I have 3 pc's in the network and they can all access the
internet. From these pc's i am trying to connect to my office VPN.I Can ping
the address but cannot connect via Dialer.
The VPN connection works w
t in ur pc
or laptop rather than break ur back with a ton-weight of
books!
hth
Derek Lewinson--"With God, ALL things
are possible"
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Anthony
AwatefeSent: 27 November 200
eeds to be done and
change the register back to the original setting (0x2102).
'Show ver' will tell you what the register is currently set to.
check out the following link:
http://www.cisco.com/warp/public/620/6.html
hth,
Derek Lewinson
--
"With God, ALL things are
Cisco ATM Solutions (Cisco Certification)
by Galina Pildush
http://www.bestbookbuys.com/cgi-bin/bbb.cgi?ISBN=1578702135
Hope this helps. I haven't used it, but it was reccommended. I have
ordered.
--Derek
On Fri, Dec 01, 2000 at 10:36:09PM +0800, GNOME
Anybody want to join one?
I will orgnaize.
Presently studying for BCRAN. Have some hardware
Looking for some determined individuals, intent on attaining CCNP within the
next 6 months
Interested? Mail or phone me
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile (UK): 0044
Question 1:
Router A and Router B are configured to route IP to each other over a serial
line. Host A is connected to Router A and Host B is connected to Router B. A
packet is sent from Host A to host B. A hit on the serial line causes an
error in the packet. Retransmission is sent by:
Question 2
Can a secondary IP be assigned to a Catalyst switch SC0 interface
temporarily?
If so, once I logon (by console/telnet) to the switch, I can troubleshoot
the connectivity to an attached PC/server by pinging its IP address
(assuming the secondary IP temporarily added is the same subnet as this
PC/se
When do you clear ARP on a router? Any scenario related to firewall or local
director?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/lis
True Mark, but the real life situation is I believe it is the server config
problem but the NT administrator thinks it is the network problem. By
narrowing the scope of the troubleshooting, they will have nothing to say.
Thanks.
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL
What is the default TTL when a IP packet leaves the source?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list arc
Interested?
We are looking for determined individuals, intent on attaining CCNP v2.0
by March 31st 2001!
Current group focus is BCRAN by mid-october 2000;
Interested? Mail me!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile (UK): 0044 7979 705446
winmail.dat
y, everbody soon!
PLEASE REPLY TO [EMAIL PROTECTED] and [EMAIL PROTECTED]
Regards,
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile (UK): 0044 7979 705446
winmail.dat
type
and yes, I did mean to be this blunt!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
William E Gragido
Sent: 20 October 2000 18:37
To: Charles Nunie; [EMAIL PROTECTED]
Subject: RE: Sniffer Pro 3
dumped the hex address into CCO and got this link...
http://www.cisco.com/warp/public/121/hsrpoverlane.shtml
hth
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Chuck Church
Sent: 02 November 2000
If you have/have access to a Teltone TLS (3,4 or 5) and are:
a: willing to sell it @ a fair price
b: ship it to the UK (@ my expense)
please get in touch, mucho pronto, por favor!
gracias!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile (UK): 0044 7979 705446 (GMT
If you have/have access to a Teltone TLS (3,4 or 5) and are:
a: willing to sell it @ a fair price
b: ship it to the UK (@ my expense)
please get in touch, mucho pronto, por favor!
gracias!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile (UK): 0044 7979 705446 (GMT
you have 2 banks,
each bank has 8mb installed (each chip is 2048kb in size)
if I'm reading it right, you have 16mb of flash
but of course, you know this!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On B
I understand that these switches have the same command set as a CAT 5xxx
Is this true?
Also, can these things take an RSM/SP?
If so, I'd like one 'cos I gather they are a heck of a lot cheaper than a
CAT5xxx!
If you can supply me with one @ a good price, mail me!
regards,
Dere
I understand that these switches have the same command set as a CAT 5xxx
Is this true?
Also, can these things take an RSM/SP?
If so, I'd like one 'cos I gather they are a heck of a lot cheaper than a
CAT5xxx!
If you can supply me with one @ a good price, mail me!
regards,
Dere
A BIG THANK-YOU to all who replied to my query!
You have all been instrumental in me becoming an
more informed buyer and student!
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: 08
of ATM interfaces. But the Cisco 8540 is killing me. I am trying to set up
an interface on the 8540 to troubleshoot another device, and I cannot even
ping the interface from the ATM switch itself. Would anyone mind taking a
look at the configuration, if you have experience with the 8540? Please C
To all, Howard and Rita:
Howard, I have spoken to you in the past, this is my 3rd time
rejoining the list. But if any of you have any more information on online
courses I would be welcome to it. I would not like vendor specific course,
but I welcome technology courses. Responding to the
): received packet from 192.128.101.16 (N) NEW SA
Derek S. Winchester
IPSS Network Engineer
IP Services Business Unit
Lucent Technologies
Phone: 978-298-2143
Cell: 978-973-4561
Fax: 978-298-2006
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8703&am
ied udp
202.163.101.37(0) (Serial1/1 *HDLC*) -> a.b.c.163(0), 1 packet
what do these mean ??? is it that someone from 202.163.101.37 is scanning my
block ??? but how do these show up shouldn't they show up when i apply an
ACL inbound on the ser 1/1 ???
any explanations will be appre
s case by the 213
address ??? but they are not listed in the ACL ???
if someone could come up with an explanation on this it would be nice ...
thanks !
--
Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10130&t=10123
---
advance
Cheers
Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35935&t=35935
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
I just took the exam, and it had a sheet that you could pop up with the Dec
to Hex conversions. I only had 2 questions like that, though.
--Derek
-Original Message-
From: colin newman [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 20, 2002 3:25 AM
To: [EMAIL PROTECTED]
Subject: RE
that and the same thing
happened until I changed the date.
Try it, Let me know.
Cheers
Derek Gaff
- Original Message -
From: "Ocsic"
To:
Sent: Friday, March 29, 2002 2:05 AM
Subject: Re: Cisco view Problems [7:39764]
> upgrade the java
>
>
> ""maamun
Correct. All you need is a serial interface. If you ask for a T1 or a E1
they will always offer you a Pri or multiflex. Serial is the only interface
you should ask for when using a T1 or E1
Derek S. Winchester
-Original Message-
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent
The maximum delay for keepalives really depend on your phase one and phase
two lifetimes. And if you have an idle timer set for your tunnels and
whatever that value may be. Keepalives are mostly supported by your router
or vpn box. I haven't ran across a client that supported keepalives.
Although
atter what the score is. Thanks for all the
information and thoughts.
Cheers Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28772&t=28772
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
First...I am assuming that you have 'ip cef' on globally.
next...Look at the configs... you have different queueing strategies on
each. I have run into a problem like this, where will one using fifo and
one using fair-queue you will see issues with the load-sharing. Try to
either make them both
=
Thanks in advance.
Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33294&t=33294
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
.
Waiting for your reply.
Thanks in advance
Derek
- Original Message -
From: "Mike Sweeney"
To:
Sent: Saturday, January 26, 2002 7:38 PM
Subject: RE: Custom Upgrade for Cat 5000 Switch [7:33294]
> I found it :) right on top of the piles
>
> Anyways.. the kit I have is f
Having a DHCP agent will allow distribution of DHCP address across different
subnet. But then isn't the address supposed to be subnet dependent? If you
have a DHCP server sitting in Subnet A releasing IPs for Subnet B and an
agent sitting in Subnet B helping the distribution. Hosts in B will get
c
PacBell wants to charge $30 everytime I change my home ISDN equipment.
They said they have to reprogram their side to reflect the new equipment.
I am setting up my home lab with 3COM Impact, Pipeline75 and Cisco routers.
That is gonna cost me arm and leg!
Do I have to let them know?
___
I have checked the cisco site, but can only find info on how to set up the
server,
not troubleshoot it.
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile: 0044 (0)709 205 2615
winmail.dat
I have this book.
It is indeed an excellent on-the-job referenec.
However, I have been warned that it is becoming a little dated
in terms of its content.
can anyone confirm/dispute this?
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile: 0709 205 2615
> -Origi
does anyone have the enterprise version or the Networtk Equipment add-on
and if so...
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
winmail.dat
Anyone got one to sell @ a good price?
Needs to be able to function in the UK (voltage selectable or 240v) and
support UK and Europe's isdn standard
Let me know
Derek Lewinson, CCNA, MCSE
Email: [EMAIL PROTECTED]
Tel/Fax/Mobile: 0044 709 205 2615
winmail.dat
The Prep book says IEEE 802.3 is more popular (pg. 14, seventh line from
bottom) but Cisco router is default to ARPA (Ethernet_II)?
I believe Windows network is using 802.3 and it is not changeable. Correct
me if I am wrong please. This ethernet encapsulation thing is driving me
nuts. Every book t
Easier way to do Access-lists
Elmer:
This is my guess. Do you have the answer?
access-list 111 denyip 211.0.0.0 0.255.255.255 any log
access-list 111 denyip 212.0.0.0 0.255.255.255 any log
access-list 111 permit ip any any
===
""Deloso, Elmer
Dale:
You really think DEEP.
(You meant 214.3.1.50 instead of 214.3.2.50, right?)
""Dale Holmes"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What is strange about it is that I can't tell where 214.3.2.50 is in
> relation to the router interface on which th
It is a subnet of a Class A. This subnet has a 255.255.255.0 (or /24) subnet
mask and also falls on 10.0.0.0 Class A private address space.
"Oscar Rau" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> We are configuring a PIX interface with the following Address
Is a TCP packet (layer 4) encapsulated by a IP packet (layer 3) which is
inside a Layer 2 frame?
If so, why the headers of a IP packet and TCP packet look so similar and
redundant?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list
considered.
Regards,
Derek
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Your attitude (at best) is somewhat uncaring
Sometimes we techies forget how we got here!
Sometimes one doesn't know where to start and pointers are helpful.
Show a little mercy; you yourself may need some someday.
Karam and all that...
regards,
Derek Lewinson, CCNA, MCSE, A+
> -
Suites
*Basic Router Operations
*Configuring a Router
*The Cisco Discovery Protocol
*Implementing IP and IPX Routing
*Basic Traffic Management
Intersted?
Ring Me!
0208 900 5922
07961 132092
Fax Me!
0208 900 5916
Mail Me!
[EMAIL PROTECTED]
Regards,
Derek Lewinson
G-one Systems Ltd
Any help, URLS etc much appreciated.
Regards,
Derek Lewinson
G-one Systems Ltd
mailto:[EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report miscondu
We all know how tough it is to be a CCNP/CCIE.
For those who have tried and tried, how much time did you spend? How much
$$? How many times did you sit in a exam or the lab? About to give up?
(Just want to understand the difficulty of it from another angle.)
___
recommend (up to a max of 20%).
So spread the word!
We look forward to serving you in the near future!
Regards,
Derek Lewinson, CCNA, MCSE, A+
For and on behalf of G.one Systems Ltd.
Email: [EMAIL PROTECTED]
Tel: +44 (0)208 900 5922
Fax: +44 (0)208 900 5919
Mobile: +44 (0)7961 132092
equipment.
Does anybody from this part of the world have any ideas.
Cheers
Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21127&t=21127
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
equipment.
Does anybody from this part of the world have any ideas.
Cheers
Derek
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21126&t=21109
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Hi Chee Tong
27W5d means that the switch is up 27Weeks and 5 Days. I had a problem
similar to this and what I did to resolve it was to make sure that the
Switch was hard coded to a port speed instead of Auto.
regards
Derek
- Original Message -
From: "Sim, CT (Chee Tong)"
Shap
You can do ATM Discovery on the ATM interface and this will let you know
what the VPI/VCI that you should use. Lookup on Cisco Websie.
derek
- Original Message -
From: "Reimer, Fred"
To:
Sent: Monday, August 25, 2003 8:57 PM
Subject: RE: Urgent . ATM [7:74345]
> Th
James
Your missing the command "vpdn enable outside" from your config.
regards
derek
- Original Message -
From: "James Willard"
To:
Sent: Tuesday, August 26, 2003 12:17 AM
Subject: PIX VPN Client Configuration - At my wit's end! [7:74363]
> Hi all,
>
Actually they are both one and the same. The coding in the way the T1 is
setup at the CO makes it viable to be used as a T1. Both provides 1.544mbs
bandwidth. The test is wrong unless it gears towards voice technology.
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL
John: A T1 is rated at 1.554mbs. A PRI is physically a T1 different
configuration makes it a PRI. Let me have your source that tells you
otherwise and I will say you are misrepresenting the information.
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410
And that is correct. T1 is basically a physical standard for a Pipe. PRI is
basically a logical standard for a pipe. The framing and line coding are the
same.
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original
If you read what I wrote previously, you would not have jumped on what I
said. Pri is logical T1 is physical. This is not that big of a topic.
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 28, 2000 3:47 PM
To: Winchester, Derek S.
Cc: 'N
Looks like you are not receiving any LMI. The problem is either with your CO
or your CSU. Check you physical connections and then call the CO to see if
they can tell you if they are having any problems
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410
for
the exam by starting with SNA options (dlsw, TN3270, and TN5250. Thanks for
Advance for your advice.
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http
t the correct
lmi
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: Chris Lemagie [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 10, 2000 2:06 PM
To: Stull, Cory; 'Hans Stout'
Cc: &
ittle easier
B. 80% of job consists of exploring new
options
C. If its in the budget(department) why not
expand your resources
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 44
knows
Cisco, but to someone who works with it everyday he might seem like a dumb
CCIE. Now if he comes back to the Cisco side of the track, yeah he will get
job offers and a good position. But to the common Engineer ready to critique
him, he will seem quite a bit of a Cisco poser.
Derek S. Winchest
Derekwtp
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: Brandon Carroll [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 19, 2000 4:31 PM
To: Marc Giroux (EMC
John,
Do you have a sniffer? It might be alot easier to troubleshoot the problem
if you capture what exactly is transporting over your network.
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original
dropped
after it reaches the vlan and find out it cannot be routed to any port.
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: J K [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 27
Yes I am receiving them
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: Taylor, Don [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 18, 2000 12:42 PM
To: 'Nobody'
Command for a Static route is: ip route 0.0.0.0 x.x.x.x 0.0.0.0, and for a
Default route is: ip default-network 0.0.0.0 x.x.x.x
Derek S. Winchester
Sr. Wan Engineer
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: Jacques
Is this an active router or is it cold? Your Ios image might be bad. Are
you sure about the IP address of the eo? With what is specified its hard to
narrow the problem
Derek S. Winchester
Sr. Wan Engineer
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
I agree anyone making less than 60k in this field is underpaid no matter
where you live. Starting salary is 60k even with a CCNA. At least it was 3
years ago when I left System Admin and went to Wan development.
Derek S. Winchester
Sr. Wan Engineer
Data Communications Department
[EMAIL
Passed Bcran and now I'm officially CCNP. My plans next are kind of fuzzy.
But I'm thinking of studying for the written. Thanks group for your support.
For those that will ask my order of tests were ACRC, CLSC, CIT, Bcran
Derek S. Winchester
Sr. Wan Engineer
Data Communications
Just passed the test yesterday. And that was my only resource, besides
Boson. It is all you will need.
Derek S. Winchester
Sr. Wan Engineer
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: Scott Merritt [mailto:[EMAIL
Looking for an educated answer other than the book definitions that explain
Convergence in Eigrp: What feature or why is Convergence in Eigrp faster
than other Link-state and distance vector protocols. I would like it in the
words that actually makes sense. I know that it is faster, and I know tha
appreciated.
Derek S. Winchester
Sr. Wan Engineer
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http
You get a receipt that's about it. No you don't get anything until you pass
the last exam
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: [EMAIL PROTECTED] [mai
go to www.fatbrain.com and put in the isdn and you'll save yourself ten
dollars on this book.. always trying to save a buck
-Original Message-
From: Tom Drake [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 23, 2001 6:00 AM
To: [EMAIL PROTECTED]
Subject: CCNP support guide
Hallo,
I'
if your looking for a low cost management tool try http://solarwinds.net/
this is the management suite that we use in conjunction with a few others
their are free evaluation downloads on the web site so you can try it free
of cost. I believe the professional version is only 300 or so. Check
what was the ftp site that you were attempting to go to.. if many were they
in the same geographic location i.e. Seattle Washington.. do any of the
paths correspond to the others. I'm coming of a .mil site and am
experiencing the same problem
> -Original Message-
> From: [EMAIL PROTECTED]
http://www.cisco.com/pcgi-bin/lm/show_form.pl?95873791437792968755220031
> -Original Message-
> From: Mark Lindon [SMTP:[EMAIL PROTECTED]]
> Sent: 19 May, 2000 8:04 AM
> To: 'paul doyl'; [EMAIL PROTECTED]
> Subject: RE: Free Book: CCN
>
> Same here...
>
> -Original Message-
> this one works, at the end of the show you can register for a free book
>
> -Original Message-
> From: Makarand Yerawadekar [SMTP:[EMAIL PROTECTED]]
> Sent: 22 May, 2000 2:33 AM
> Cc: [EMAIL PROTECTED]
> Subject: Re: Free Book: CCN
>
> Guys,
>
> I just tried it and I could rea
82 matches
Mail list logo
