You have to upgrade the 2500's to 16MB Memory and 16MB Flash to put 12.2 IOS
on them. However, to do this you need to make sure the Boot ROM version in
each router is at least 10.2(8a). Do a show version on the router to see
what version the Boot ROM is. You can buy memory and flash on many of the
Use the squeeze command. Cisco states The squeeze command, which is used
to erase all files marked for deletion on a Flash file system, is now
available on Cisco 2600 and Cisco 3600 series routers.
So, you did the first step by deleting the IOS, but now you have to squeeze
it in order to remove
You have to upgrade the 2500's to 16MB Memory and 16MB Flash to put 12.2 IOS
on them. However, to do this you need to make sure the Boot ROM version in
each router is at least 10.2(8a). Do a show version on the router to see
what version the Boot ROM is. You can buy memory and flash on many of the
You can do a show version to see what version of Boot ROM you have. You
need at least Boot ROM version 10.2(8a) to upgrade to 16 MB Flash.
You can find them on the auction sites. Here's one I found. There are plenty
more out there (watch for wrap):
But be very afraid of what it will do to your wallet! (Sorry, couldn't
resist) :-)
Shawn K.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, August 25, 2003 1:53 AM
To: [EMAIL PROTECTED]
Subject: RE: ooking for CCIE practice test. What boson test is the
After looking over the blueprints, there aren't a lot of differences between
the old exams and the new exams that I can see. There are some newer topics,
but I really don't see enough change between the old exams and the new exams
to get nervous about. I noticed that Cisco likes to take a topic
Who's Doug? Dennis' clone? :-)
Shawn K.
-Original Message-
From: Thomas Larus [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 1:51 PM
To: [EMAIL PROTECTED]
Subject: Re: GuideLine book for CCIE Written [7:73925]
Look into Dennis Laganiere's and Brad Ellis' Study Guide for the
Just so you know, there are companies out there that refund your money if
you don't pass the first time.
Shawn K.
-Original Message-
From: Kevin Wigle [mailto:[EMAIL PROTECTED]
Sent: Saturday, August 09, 2003 10:35 AM
To: [EMAIL PROTECTED]
Subject: Re: CCDA (DESGN 640-861) ... A
I just can't see it happening (pass the CCIE lab with only reading books).
I'm a CCNP/CCDP with a good, solid three years of hands-on Cisco experience
under my belt and can't believe what I've learned by being able to actually
configure and troubleshoot the equipment. There's no way that I could
Yes, I have seen it on one of my boxes. It's a hardware problem. Open a TAC
case and they'll probably RMA it.
Shawn K.
-Original Message-
From: Firesox [mailto:[EMAIL PROTECTED]
Sent: Friday, July 18, 2003 7:20 AM
To: [EMAIL PROTECTED]
Subject: 3524XL Error Message [7:72563]
Folks,
I
I've seen them for sale on the auction sites before.
Shawn K.
-Original Message-
From: maine dude [mailto:[EMAIL PROTECTED]
Sent: Monday, July 07, 2003 8:47 AM
To: [EMAIL PROTECTED]
Subject: Exam changes [7:71982]
Hi,
I want to get hold of the Cisco Learning Product folders you get
What trick? :-)
(Remember the Quoting in Replies message that John sent out that stated,
When responding to a post, PLEASE QUOTE WHAT YOU'RE REPLYING TO!) :-)
Shawn K.
-Original Message-
From: David Vital [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 11:36 PM
To: [EMAIL
set port auxiliaryvlan 5/18 none
You'll notice if you do a show port auxiliary command, you'll see that
your port 5/18 will be set up with auxiliary vlan 140. Some of the other
ports will be set up as none, which is what you want for port 5/18. Once
you do the set port auxiliaryvlan 5/18 none
There was some discussion on this a while back, so check the archives at the
following link:
http://www.groupstudy.com/cgi-bin/search
From what I can recall, the 2600's, 3600's, and others can use the show
diag command or the show version command. However, I don't believe you
can do it with the
Greetings,
I need some pointers with rate-limiting and hopeing you guys can help
me out. We have a DS3 ckt in one of our sites and need to limit their
traffic to 8Mb to internal traffic and 2Mb if traffic destined to the
web. My concern is packet drops when the threshold reachs either the 8
According to Cisco's website, using the session command is what they call
accessing the MSFC from the switch CLI using a Telnet session. However,
you can access the MSFC from the console port using the switch console
command, which Cisco describes as accessing the MSFC from the switch CLI
directly
image into
bootflash!
Shawn K.
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Monday, June 23, 2003 2:56 PM
To: Kaminski, Shawn G
Cc: '[EMAIL PROTECTED]'
Subject: Re: Unable to copy from Sup-Slot0 [7:71038]
If you need to get it working copy the image off the slot0
To: Kaminski, Shawn G
Cc: [EMAIL PROTECTED]
Subject: RE: 6509 MSFC [7:71340]
At 02:48 PM 6/25/2003 +, Kaminski, Shawn G wrote:
According to Cisco's website, using the session command is what they call
accessing the MSFC from the switch CLI using a Telnet session
Not using a telnet session, rather
I agree. I was going to rag about this the other day, but figured that many
people on this list already think I bi*ch too much about other things! :-)
Shawn K.
-Original Message-
From: John Neiberger [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 2:34 PM
To: [EMAIL PROTECTED]
Good information! Thanks for trying it out for us!
Shawn K.
-Original Message-
From: Zsombor Papp [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 4:21 PM
To: [EMAIL PROTECTED]
Subject: Re: 6509 MSFC [7:71340]
You made me try it... :)
I configured this on the MSFC:
-mz.121-8a.E5
%Error opening sup-slot0:c6msfc2-jsv-mz.121-8a.E5 (Timed out)
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Monday, June 23, 2003 11:15 AM
To: [EMAIL PROTECTED]
Subject: Re: Unable to copy from Sup-Slot0 [7:71038]
Kaminski, Shawn G wrote:
OK
-8a.E5
Loading slot0:c6msfc2-jsv-mz.121-8a.E5
Loading slot0:c6msfc2-jsv-mz.121-8a.E5
%Error opening sup-slot0:c6msfc2-jsv-mz.121-8a.E5 (Timed out)
Shawn G. Kaminski
EDS - GTO Capability Center
Dow Chemical Test Facilities - Network Support
Message Posted at:
http://www.groupstudy.com/form
Sorry if this is a silly question, but what do you mean by new ILS image?
Is this software? A chip or ROM? What did Teltone say?
Please respond.
Shawn K.
-Original Message-
From: Alex [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 17, 2003 1:01 PM
To: [EMAIL PROTECTED]
Subject: Teltone
Alex,
What's the link to the page you're referring to? I did a quick look through
the Teltone website and I couldn't locate it.
Shawn K.
-Original Message-
From: aremes [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2003 10:36 AM
To: Kaminski, Shawn G
Subject: Re: Teltone ILS
Buy #4. :-)
Shawn K.
-Original Message-
From: David Power [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 12, 2003 4:57 PM
To: [EMAIL PROTECTED]
Subject: Boson test 1,2 or #3 [7:70605]
I am thinking to buy boson tests for ccie 350-001 (RS),if someone just want
to buy one which one it
STOP IT! Both of you! :-)
Shawn K.
P.S. This thread has been highly entertaining!
-Original Message-
From: n rf [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 11, 2003 10:28 AM
To: [EMAIL PROTECTED]
Subject: RE: RE: RE: RE: number of CCIE??? [7:70328]
Jack Nalbandian wrote:
Boy, for
Bad NVRAM?
Or, could you be writing the changes to a config file that isn't being used
for the startup? What kind of router is it? I vaguely remember something
about Class A flash file systems where the startup configuration file is
stored in a place that is specified by an environment variable,
From what I'm reading, the answer is no. See the following link for
recertification info (watch for wrap):
http://www.cisco.com/en/US/learning/le3/learning_recertification_training.ht
ml
Shawn K.
-Original Message-
From: Duncan Wallace [mailto:[EMAIL PROTECTED]
Sent: Friday, May 30,
Look at the CCNA blueprint on the Cisco website for the most accurate
description of topics that will be covered. See the following link (watch
for wrap):
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_exam
s/640-607.html
Shawn K.
-Original Message-
From:
There are good and bad points about this.
It's always good to have multiple lab vendors to choose from and I'm sure
that people would be interested. HOWEVER, the certification market is
saturated with labs like yours and with study materials, etc. It is very
difficult to break into this business
I don't believe that ISL requires identical native VLANs at each end of a
trunk, however, 802.1Q does (if I'm wrong, someone please correct me). The
trunk negotiation parameter at each end of the link does not have to be
identical because there can be different negotiation combinations that each
I was just reading about this the other day and book-marked this link (watch
for wrap):
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note0918
6a00801350b8.shtml
Shawn K.
-Original Message-
From: DeVoe, Charles (PKI) [mailto:[EMAIL PROTECTED]
Sent: Thursday,
thanks a lotDanny Free wrote:
OOPS,
I forgot to add on Router 2:
!
router ospf 100
area 0 authentication message-digest.
:))
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66815t=66648
--
FAQ, list archives, and
hi,all
In ospf, when area 0 is authenticated by md5, should virtual-link be
authenticated by md5?
thanks in advance
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66648t=66648
--
FAQ, list archives, and subscription
I just sent the previous message about a week ago and here it mysteriously
shows up again. I did not send it again. The first sarcastic one that I sent
was plenty! I think the Groupstudy servers have brain damage.
Shawn K.
-Original Message-
From: Kaminski, Shawn G [SMTP:[EMAIL
Oh brother! Now it's come to secretly coding company names so they don't get
filtered! What's this world coming to?! :-)
Shawn K.
-Original Message-
From: Stuart Laubstein [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: AW: 2950 with EMI
Greetings all,
I'm trying to set up a test bed to test multicasting in a wan environment.
I'm looking for any feedback, test plans and any software that might come in
handy.
Thanks, Gibran
-
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live
, plus much more.
Registration Web Site
http://services.epac.com/cisco/
(One book per person)
Shawn G. Kaminski
EDS - GTO Capability Center
Dow Chemical Test Facilities - Network Support
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66328t=66328
Greetings,
Any of you guys and girls test FRF 16 using only cisco routers? I can use
any information you might have. I'm just a little confused on how to set it
up in a lab environment, especially using a router as frame switch.
R1FR SWITCH--R2
R1 = 7206VXR
Oh brother! Now it's come to secretly coding company names so they don't get
filtered! What's this world coming to?! :-)
Shawn K.
-Original Message-
From: Stuart Laubstein [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: AW: 2950 with EMI
can your message be detail moreDeVoe, Charles (PKI) wrote:
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=65714t=65659
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
I am in no way picking on you in particular in this email, but this brings
up a point that has been discussed previously at Groupstudy. A big problem
with all this certification insanity and brainwashing is that people can
keep taking and re-taking the exams until they pass. So, people end up not
I like this software (Pumpkin from klever.com). I've been using it for years
and it has never given me any problems.
Shawn K.
-Original Message-
From: Larry Letterman [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 11, 2003 3:12 AM
To: [EMAIL PROTECTED]
Subject: Re: TFTP to Flash or
, they are internally cooled and are able to
operate at extreme temperatures and withstand extreme vibration and shock.
Here's some links for those who are interested:
http://newsroom.cisco.com/dlls/ts_030303.html
http://newsroom.cisco.com/dlls/CiscoCatalyst2955-22.jpg
Shawn G. Kaminski
Before some people have a premature Boson nervous breakdown, let's look at
what the question is asking. First, the poster is asking for information on
the CCIE CS (Communications and Services) exam. He says WAN Switching, but
I don't think that's available anymore, so he probably meant
Boson is too expensive. There are better, less expensive alternatives out
there.
Just my 2 cents,
Shawn K.
-Original Message-
From: Bob Sinclair [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 25, 2003 3:36 PM
To: [EMAIL PROTECTED]
Subject: Re: The CCNP BSIN ( I Think Exam )
Where could someone get the Cisco Academy Semester 5 - Advanced Routing
materials? I'm curious as to what their labs are like.
Shawn K.
-Original Message-
From: Mark Smith [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 25, 2003 2:39 PM
To: [EMAIL PROTECTED]
Subject: RE: The CCNP
/Multicast and QOS also now
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
From: Kaminski, Shawn G
To:
Sent: Friday, February 21, 2003 8:11 AM
Subject: RE: CCIE Written Traning [7:63494]
I don't know of any training classes for the CCIE Written,
probably because
I don't know of any training classes for the CCIE Written, probably because
the CCIE Written covers a lot of oddball technologies, etc. If you did find
a class, all they would probably do is go over the topics on the CCIE
Written blueprint. Why bother paying for a class when you can do that for
I have setup the Easy VPN in 827 router(CPE) .I am able to configure
Extended authentication as local .But i want to configure the nt domain
authentication.Can anyone suggest how this setup can be achieved .
Thanks
Giri
Message Posted at:
I was wondering how long it would take for some of the big guns in this
group to finally mention this within the group. :-) In fact, as Chuck, Paul,
and John know, I've been ragging on them so much about this topic that they
probably can't stand me anymore.
I've been in the certification business
I feel that I need to say something. You just sent this exact same message a
week ago.
Shawn K.
-Original Message-
From: Paul Dong So [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 12, 2003 9:27 AM
To: [EMAIL PROTECTED]
Subject: Passed CCIE written exam [7:62854]
Hi all,
Just
John,
You may want to drown your disappointment in something a little stronger
than coffee. :-)
I volunteered to teach a small computer class at my daughter's school a
while back and I definitely had those days. It usually happened when there
were pressing issues at the office and I was anxious
No AppleTalk, SNA, Stratacom, or IPX that I know of.
Shawn K.
-Original Message-
From: Malcolm Salmons [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 07, 2003 9:53 AM
To: [EMAIL PROTECTED]
Subject: CID 3.0 Appletalk, SNA and Voice? [7:62637]
Hi
I'm looking to take my CID exam next
Uh oh. Someone on this list probably pooped their pants after reading CN's
message because of the NDA. :-)
Probably the most you'll get out of anyone is that it is possible that DVMRP
is covered in the new CCIE lab because anything is fair game. Since the
Cisco IOS software supports PIM-to-DVMRP
Just a note: I needed to purchase one of those Programmable Logic Controller
Chip (PLCC) extractor tools to pull out the old Boot ROMS (the tool is shown
in the link that Symon provided). I just couldn't pull them out any other
way without doing some damage! They're inexpensive; I got mine at
with Cisco, but was wondering if any of you have
received this message before and what you found out.
Thanks,
Shawn G. Kaminski
EDS - GTO Capability Center
Dow Chemical Test Facilities - Network Support
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62361t=62361
Hello Group,
I have a question about a particular interface card and its
sample configurations. I have (or will be having shortly)
VWIC-2MFT-T1 card with AIM-ATM. I was told that this card can
run ATM encapsulation if used with AIM-ATM. I tried to search
CCO for a sample configuration but all I
That's why I'm thinking along Pricilla's line of thought; that the
GigaStacks may change something that allows switches more than one hop away
to be seen using the show cdp neighbors command. I haven't researched it
further, but plan to contact Cisco regarding this.
Shawn K.
-Original
Hello people...
I have a brand new WIC-1DSU card either for sale or trade-in for UBR924
modems.
ThanksGibran
-
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
Message Posted at:
.
Thanks,
Shawn G. Kaminski
EDS - GTO Capability Center
Dow Chemical Test Facilities - Network Support
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61782t=61782
--
FAQ, list archives, and subscription info: http
Unfortunately, these switches are not using clustering.
Shawn K.
-Original Message-
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 24, 2003 2:33 PM
To: 'Kaminski, Shawn G'; [EMAIL PROTECTED]
Subject: RE: show cdp neighbors command [7:61782]
By using CDP, a command
I believe that Brad was talking about two separate books, the one that you
read by Halabi (Internet Routing Arch) and the one by Caslow (Cisco
Certification: Bridges, Routers, and Switches for CCIE's 2nd Edition).
The best resource would probably be the blueprint and CCO. I haven't heard
of any
PM
To: Kaminski, Shawn G; [EMAIL PROTECTED]
Subject: RE: 640-442 MCNS [7:60517]
Hi Shawn --
The 1/17/03 deadline for the MCNS -- does that apply to the other three
security exams also?? Do you have a CCO page where this info is avaiable??
Thanks in advance.
Greg Macaulay
Oldest Human Being
You must be wondering about doing conversions between Layer 3 and Layer 2
multicast addresses. Yes, a Hex conversion chart is provided on the exam.
And for the people worried about the NDA, this does not break it because it
is mentioned in several books.
Shawn K.
-Original Message-
From:
You probably already know this, but the last day you can register for this
exam is 1/17/03 and the last day you can take it is 2/28/03. After that, the
MCNS 640-442 exam is replaced with the new MCNS 640-100. Just wanted to
mention it in so you don't study 640-442 materials and get surprised with
Destination-IP flow mask on the MLS-SE is the default flow mask, no
access-lists are being used on the MLS-RP.
Source-Destination-IP flow mask on the MLS-SE is used when there is a
standard access-list used on the MLS-RP.
IP-Flow flow mask on the MLS-SE is used when there is an extended
Here's a tip: Since the simulation question(s) will most likely be on
configuring one of the routing protocols, you really need to know how to
completely configure them (please note that you need to know more about
configuring these protocols than what I have shown):
Configuring OSPF in a Single
It looks like my formatting didn't show up on the message below, which is
why the commands don't look right. Anyway, I'm sure you understood what I
was trying to get at!
Shawn K.
-Original Message-
From: Kaminski, Shawn G [SMTP:[EMAIL PROTECTED]]
Sent: Monday, January 06, 2003 11:20
You should add a switch or two (preferably 3550's because that's what is
used in the CCIE Lab) and also start adding some more routers. I believe
that the CCNP exams still test on the Catalyst 5000/6000 set-based commands,
but don't buy a Catalyst 5000 (unless you have money to burn) since you'll
Dr. Jimmy, :-)
If I could get someone to pay for my Ph.D., I would go for it! pH would
definitely have more clout than CCNP/CCDP! Whether or not it would be easy
to find a position that requires a Ph.D. in Computer Science and a salary to
match is a whole different question.
Shawn K.
First, send me all your routers. :-)
In all seriousness, the tech job market pretty much sucks everywhere right
now because it is over-saturated (in my opinion) and companies are really
cutting staff to help their bottom line. I take it that you're still working
as an accountant, so you still
Chuck wrote:
someone else I knew long ago used to say that at the root of all matter was
our sex drive. we act in the manner which we perceive will get us regular
physical contact and satisfaction.
nrf wrote:
So if that's the real and honest battlefield that I'm fighting on,
Chuck counters:
I'm just curious, Chuck. When was the last time you had any sleep? :-)
Interesting subject tonight!
Shawn K.
-Original Message-
From: The Long and Winding Road [SMTP:[EMAIL PROTECTED]]
Sent: Friday, January 03, 2003 10:46 PM
To: [EMAIL PROTECTED]
Subject: Tonight's Homily -
FORTRAN? I remember typing out all those ridiculous punch cards in the 80's.
Wonder if anyone remembers dropping their big stack of punch cards and then
trying to put them back in order! :-)
Shawn K.
-Original Message-
From: The Long and Winding Road [SMTP:[EMAIL PROTECTED]]
Sent:
Free, my a**! If no one else can advertise their stuff on this board, then
this guy shouldn't be doing it either. By the way, what's your CCIE number?
Shawn K.
-Original Message-
From: [EMAIL PROTECTED] . [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 12, 2002 10:37 PM
To: [EMAIL
I can't comment on this book because I haven't read it. However, I've found
that using the Cisco Press books along with the exam blueprint and CCO is
normally the best bet for success. Also, 505 materials will normally be
sufficient to pass the 605 exam.
Shawn K.
-Original Message-
From:
Bill,
I agree with you in that it was very foolish to just start throwing pink
slips around without first finding out how these individuals may be able to
help the company. I'm sure many of them would be happy to take a pay cut and
would still be able to contribute valuable input. I don't believe
Also, the 1600 series and the positioning of these routers (and other
routers) in the market.
Shawn K.
-Original Message-
From: John McCartney [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 10, 2002 2:00 PM
To: [EMAIL PROTECTED]
Subject: RE: BCRAN 640-505 [7:58871]
Just understand
Agreed. When you actually do something, it tends to stay in memory. On
most of my exams, I would read the text and then try to incorporate the
topic into my lab. It really helped to understand the topic. However, as the
original poster mentioned, there are some topics on this exam that you can't
My guess is that you for sure have to do the no shutdown command but
probably not the copy run start command. After all, you're doing a
simulation that is supposed to represent what you would actually do in a
certain situation. If you don't bring up an interface and that interface is
needed for
CCO is always the best place to study because I believe that most of the
questions are taken from there. The nice thing about a book or practice
tests, if they're done correctly, is that it takes the information on CCO
(depending on the subject or exam) and puts it all in one place! Cuts down
on
Wow! Chuck didn't make it? Now I'm really worried! :-)
Shawn K.
-Original Message-
From: The Long and Winding Road
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 04, 2002 4:30 PM
To: [EMAIL PROTECTED]
Subject: Off Topic - Missed it by that much - CCIE Lab report [7:58572]
In the
Earplugs. You may end up wearing them when you take the lab, so you may as
well get used to them now.
Shawn K.
-Original Message-
From: Michael Gunnels [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 05, 2002 2:37 PM
To: [EMAIL PROTECTED]
Subject: Reduce the noise from router fans
I've heard that Priscilla Oppenheimer's book, Top-Down Network Design, is
the best book for this exam.
Shawn K.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 19, 2002 11:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Question for CCDP [7:57667]
If I remember correctly, when a node wants to become the new active monitor,
it will transmit a claim token frame. The node with the highest MAC address
becomes the active monitor.
I'm assuming you're talking about a FDDI concentrator port. One possibility
would be bad link quality.
Shawn K.
You have to be careful here because Cisco likes to add (to their blueprints)
the famous The following topics are general guidelines for the content
likely to be included on the Cisco Internetwork Design exam. However, other
related topics may also appear on any specific delivery of the exam. I
Speaking of NT-1's, you can get an Adtran NT1 Ace device pretty cheap on
eBay. Try to get one that comes with the power supply because they're
sometimes hard to find by themselves. Personally, I couldn't find the
correct power supply for one of my Adtran NT1 Ace devices at Radio Shack and
other
in December 2002.
Shawn G. Kaminski
EDS Network Engineering
Troy, MI 48098
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57051t=57051
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
The CCxx CID materials are being updated but the material that's in there is
still very much valid for the exam. The old stuff is left in there because
some people still want to learn about it. They can skip over it if they
want.
Shawn K.
Disclaimer: I have done work for CCxx
-Original
Following the Cisco CCIE Written 350-001 Blueprint is always your best bet.
You'll notice that much of the material on the blueprint hasn't changed from
the old exam, so you still need to know this material. The new stuff on the
exam (MPLS, QoS, etc.) is also very important.
However, you don't
where I can find some.
Thanks,
Shawn G. Kaminski
EDS Network Engineering - SAN
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56606t=56606
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Although this topic has been discussed in the past, there seems to be
disagreement on the correct answer. Personally, I have read the wording
before some of the surveys and it actually says that your answers will be
used to help determine scoring on the exam. I don't believe it determines
what
Priscilla,
This doesn't explain why it says at the beginning of the survey (not sure if
this is true for all exams), Your answers to this survey will help in the
grading of this exam (not sure if these are the exact words). I've seen
this on some of my exams (not betas) when I've taken the time
I'm not too fond of the snot green color that was obviously taken from the
color of their cables! :-)
Shawn K.
-Original Message-
From: Tim Medley [mailto:tim.medley;ireadyworld.com]
Sent: Friday, October 25, 2002 1:44 PM
To: [EMAIL PROTECTED]
Subject: RE: hate cisco's new site?
: RE: Native IOS on 6500 vs 3500EMI for lab study? [7:55972]
Kaminski, Shawn G wrote:
The 3550 and 6500 use different CLI's. The 3550 is IOS-based
and the 6500 is
set-based. There really isn't a good alternative for the 3550
switch. You
Whoa, hold on there a second. Although the 6500
No, I don't believe it breaks the NDA. It's not any different than knowing
what equipment is in the lab, which is spelled out for everyone right on
Cisco's website. I've heard it was Reflections or Hyperterminal. I don't
know because I haven't taken the lab yet, but I would like to know just out
While I agree that it's probably the safest way to go about it, we're
talking about a terminal emulator here, not the actual content of the lab. I
guess there's a fine line between the NDA and paranoia! :-) I'll write Cisco
and get an answer.
Shawn K.
-Original Message-
From: Thomas
Check the Groupstudy archives. I've answered this question before, so you
should find it there!
Shawn K.
-Original Message-
From: Aaron Ajello [SMTP:[EMAIL PROTECTED]]
Sent: Monday, October 14, 2002 6:23 PM
To: [EMAIL PROTECTED]
Subject: BCRAN and 700 series [7:55585]
I
I don't know of any alternative for the 3550. While you can purchase a less
expensive switch to practice your IOS-based commands (such as a 2912XL,
2924XL, or 3524XL, for example), you will be losing a lot of features that
will most likely show up on the CCIE Lab exam, such as advanced Quality of
1 - 100 of 390 matches
Mail list logo