Do both RSMs need to be on the same subnet?
Thanks
richard beddow wrote:
> Mike,
>
> DMA channels are indeed the I/O's ports I refered to, but I couldn't
> remember what they were called (each time I learn something new , something
> old falls out the other end).
>
> I came across this about th
Hello
I have a design question. I have two 5505 with RSM in each that are
connected to each other with 200Mb trunk. Right now RSM of the first
switch is in VLAN 1; RSM of the second switch is in the VLAN 2.
Altogether I have about 20 VLANs. I am planning to run HSRP between
both RSMs. What w
I am sorry for a stupid question.
I am trying to set up an OSPF network. So far I am doing from a router
to a router .
Here is what I have:
Router A:
int e0/0
ip address 192.168.30.0 255.255.255.0
ip ospf network poin-to-point
network ospf 10
network 192.168.0.0 0.0.255.255.0.0 area 0
Router B
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24845&t=24845
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/lis
Does anyone have any recomendations on VPN producs? Links to articles
and personal experience woudl be great.
As far as know Cisco VPN concentrators, Check Point, and Nokia rules the
market. What is your opinion on that.
Thanks,
Alex
[GroupStudy.com removed an attachment of type text/x-vcard
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> khramov
> Sent: Wednesday, October 03, 2001 2:50 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Access Server config [7:21877]
>
> Nope there are no passwords,
> I've got it
Nope there are no passwords,
I've got it to the point where I telnet into async 1 port and it opens it
up, but
nothing comes on the screesn, It just says open. I think there might be a
speed
mismatch issue, device that is attached to it runs at 2400 and I do no think
that you
can set access ser
We are trying to configure access server to console in to the device
that is attached to it through async port. When we try to telnet into
the device that attached to the router we get connection refused
message. What should we check?
[GroupStudy.com removed an attachment of type text/x-vcard w
flowcontrol hardware
line 9 16
line aux 0
khramov wrote:
> We are trying to configure access server to console in to the device
> that is attached to it through async port. When we try to telnet into
> the device that attached to the router we get connection refused
> message. What sho
nheimer
> >[mailto:[EMAIL PROTECTED]]
> >Sent: Wednesday, September 26, 2001 2:05 PM
> >To: [EMAIL PROTECTED]
> >Subject: Re: DHCP [7:21051]
> >
> >At 01:06 PM 9/26/01, khramov wrote:
> > > From my understanding ip dhcp-server command will enable upd broadcast
&g
nfig)#^Z
> C7507MIX#wr t
> Building configuration...ip kerberos source-interface any
> ip classless
> no ip forward-protocol udp bootps
>
> Dave
>
> khramov wrote:
>
> > I did that, but when I do sh run it is not showing up in config file. I
> > mean (i
ical broadcast is meant as 255.255.255.255, and would
> be forwarded out all interfaces (?).
>
> Hope this helps,
> Tim Booth
>
> - Original Message -
> From: "khramov"
> To:
> Sent: Tuesday, September 25, 2001 2:57 PM
> Subject: DHCP [7:21051]
&g
I did that, but when I do sh run it is not showing up in config file. I
mean (ip
forward-protocol udp 67).
Is that the way it is suppose to be?
MADMAN wrote:
> Check "ip foward protocol"
>
> Dave
>
> khramov wrote:
> >
> > Hello
> > How do
Patric,
Jeff is right, I do not think that you can pass EIGRP packets though
firewall.
My suggestion is create a vpn tunnel and put in some static routes.
Alex
Jeff Smith wrote:
> Patrick,
> I don't think you will have a choice of passing EIGRP through a firewall
> because I don't think you ca
Hello,
Does any one have experience configuring Access Server on
2511?
I've got a several devices with serial ports that I need to
access remotely, preferably telnet into them. So I found an
old 2511 with async ports. But I can not get it working.
Here is the confi
Hello
How do I enable broadcast for DHCP server? I know that ip
helper enables UDP broadcast, but broadcast of netbios
services causes some problems for win nt server. So I guess
to be more specific what can I do to forward udp broadcast on
ports 67 and 68 only?
An
Does any one have a white paper that compares Cisco 2900 XL switches to
3COM 4300 series switches?
Thanks,
Alex
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21028&t=21028
-
RSM config can be a little different. It depends on what version of
software you are
running. If you are running Version 12.0(14)W5(20). To configure vlans you
need to
type in "interface port-channel1.x" , where x is vlan ID. You might want to
research it
a little more on Cisco's web site.
Ho
I've got a 2916 XL switch with 11.2(8) SA3 software. I want to create
a vlan 2 and make that a management vlan. But it is not letting me
assign an IP address to it.
When I do :
conf t
int vlan 2
It comes back with % Unrecognized command . I've tried shutting down
vlan 1 first, it did not work.
I've got two 5505 at the core with RSM modules, both of the 5505s have
connection to the firewall. Plus I've got a trunk between the 5505s.
When I do a trace route from one of the routers that is attached to one
of the 5505 to a server outside of the firewall it first hits 5505 that
the router i
Does any one have experience with H.323 Polycom units? If so any hints
on why they can be drooping the connection to the remote site while they
are in session. All of the units are sitting behind the Cisco Pix
firewall.
Thanks,
Alex
[GroupStudy.com removed an attachment of type text/x-vcard w
set port host disables negotiation for ether channnel, trunking, and stp. I
would also
recommend to set speed and duplex manually.
Alex
MADMAN wrote:
> You could try disabling PAGP and all that good stuff with the "set
> port host" command.
>
> Dave
>
> ndabarasa michel wrote:
> >
> > hello,
I've got 2 5505 at the core of the network. Then I've got anywhere from
twenty to twenty five routers and about the same number of switches at
the distribution and access layers of the network. One of the 5505 has
blade with 8 gigabit ports, all the other port are 100 MbBaseFx.
Original design w
sometimes when I do a traceroute it skeeps some routers. Is there any
way to adjusst time out or something to get traceroute to show all the
routers that packet is going through?
Regards,
Alex
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Messag
-----
> From: "khramov"
> To:
> Sent: Thursday, September 13, 2001 7:21 AM
> Subject: Re: 5505 [7:19754]
>
> > Yes it does have a SC interface. And that is the one that I am trying to
> > telnet into.
> > Default gateway is RSM.
> >
> > "
ave an IP address and
> default gateway (probably the RSM) set?
>
> BJ
>
> -Original Message-
> From: khramov [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 13, 2001 9:47 AM
> To: [EMAIL PROTECTED]
> Subject: 5505 [7:19754]
>
> I've got a 5505 and I
What is the difference between ip default route and stating 0.0.0.0
0.0.0.0 X.X.X.X ?
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19755&t=19755
o the switch.
Regards,
Alex Khramov
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19754&t=19754
--
FAQ, list archives, and subs
I have a static route on my core router to the firewall. However, when
I do sh ip eigrp topology it shows that there are two routes to the
firewall through other routers in a topology table. Since firewall does
not respond to traceroute how can I test the network.
I am sure that it is using stai
Does anyone knows of good website that compares distribution and access
layer ethernet switches?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18969&t=18969
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
Can someone expalin me the difference between management vlan and native
vlan?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18842&t=18842
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
I would like to add that I also had bad experience with 3548 switches. I had
three go
bad out of four that I installed. However, I did have a good experience
with 2948G.
But they are a little bit more expensive.
here is my .02c
"Trevor J Corness, CCNA" wrote:
> Well, it depends.. I definately
, I think you can make the change without
> much risk. Both routing and bridging supposedly handle various frame sizes.
>
> Priscilla
>
> At 04:38 PM 9/4/01, khramov wrote:
> >Here is what I've got:
> >We have a remote site where we run token ring and etherne
> At 02:40 PM 9/4/01, khramov wrote:
> >I need to change frame size on of my Token Ring subnets. If I change the
> >Token Ring frame size on the router and it will be different (larger)
> >than the frame size that is configured on a work station how is it going
> >to a
I need to change frame size on of my Token Ring subnets. If I change the
Token Ring frame size on the router and it will be different (larger)
than the frame size that is configured on a work station how is it going
to affect the work station? And if I change the frame size on the
workstation firs
make me to busy that I couldn't
> research an access solution would be;
> A raging blaze
> A Seinfeld rerun
> don
>
> - Original Message -
> From: "khramov"
> To:
> Sent: Friday, August 24, 2001 6:17 AM
> Subject: Tacacs [7:17110]
>
> > H
Hi,
Just like everyone else sometimes I do not have enough time to do the
research myself and I post questions here. Here is what I am trying to
do: I am trying to set up some sort of security server on my network to
authorize user access on routers and switches. First of all what should
I us
Hi,
Just like everyone else sometimes I do not have enough time to do the
research myself and I post questions here. Here is what I am trying to
do: I am trying to set up some sort of security server on my network to
authorize user access on routers and switches. First of all what should
I use
Would you please explain me in simple terms what is loopback interface?
One of the techs from our ISP told me to config my router for loopback
interface instead of multilink interface so that he would push the
config to my router. He also told me that multilink requires high CPU
usage. Would you
This this:
http://www.cisco.com/warp/public/473/77.html
http://www.cisco.com/warp/public/473/74.html
Urooj's Hi-speed Internet wrote:
> Hi Folks,
> Can someone please guide me on the usage of "Spanning-tree GUARD" and UDLD
> (Uni-directional Link Detection) features in the Catalyst switches?
>
Hi,
Anyone knows of a good NTP server software that I can install on Win NT
server PC to sync. time on routers and switches?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15512&t=15512
--
FAQ, list archives, and subscription in
Is anyone using CCM software? If yes did you have to config anything
special on 6509 and 2980G sw in order for CCM to work.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13549&t=13549
--
FAQ, list archives, and subscrip
I've posted a question about this problem that I am having yesterday,
but I still have not been able to resolve this problem.
Here is what I've got: 2900 connected to 5505A which connected to
another 5505B. From 2900 I can ping 5505A's RSM and I can ping sc0 and
RSM on 5505B.
Default gateway on 2
ng on your same subnet? If not does the 5505 have a
> default gateway?
>
> -Patrick
>
> >>> "khramov" 07/09/01 05:14PM >>>
> I've got a switch hooked up to 5505. I can ping RSM module. I can ping
> all the other sw on the network that hooked up to
configured?
> If so, are you pinging from a device in the same subnet/vlan?
> If not, do you have a default route set in the switch?
>
> Those are the first things I would check.
>
> Regards,
> John
>
> >>> "khramov" 7/9/01 3:14:48 PM >>>
> I&#
I've got a switch hooked up to 5505. I can ping RSM module. I can ping
all the other sw on the network that hooked up to the 5505, but I can
not ping 5505. any ideas?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11583&t=11583
hi,
I am trying to config 6509 switch. I am adding vlan interfaces to the
RSM. I've got some Class B addresses and class C addresses. When I add
a class C address and for s.m. I put 255.255.255.0 it comes back with
message that /24 is a bad mask for this address. When I put 255.255.0.0
it acce
Any opinions on Network Instruments' Observer management software. I am
debating between this one and Agilent Advisor SW Edition. If you had
any experience with any of these software or other network management
software please let me know your opinion on what is the best buy.
Thanks a lot,
Alex
oadcast and the "no ip forward-protocol" command to not forward other
> >broadcasts.
> >
> >You would have to check the documentation to see if this would work for
> >sure. Let us know how it goes! Thanks.
> >
> >Priscilla
> >
> >
> >
&g
Peter Slow, CCNP Voice Specialist
> Network Engineer
> Planetary Networks
> 535 West 34th. Street
> New York, New York
> 10001
>
> Cell: +1(516) 782.1535
> Desk: +1(646) 792.2395
> Mail: [EMAIL PROTECTED]
>
> -Original Message-
> From: khramov [mailto
st an electrical surge or
> something?
>
> I suggest you find out more about what the Wake on LAN sender actually
> sends. Maybe somebody else knows. We did discuss it once before. Check the
> archives. We did not discusss it from the point of view of it crossing a
> router, though.
st an electrical surge or
> something?
>
> I suggest you find out more about what the Wake on LAN sender actually
> sends. Maybe somebody else knows. We did discuss it once before. Check the
> archives. We did not discusss it from the point of view of it crossing a
> router, though.
>
Is there a special config on a router for wake on lan to work?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8755&t=8755
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
I looked on Cisco's web site and I couldn't find any information. Would
you please
explain me what is vty anyway, is it only for telnet sessions?
How would you then configure access to the switch from browser.
khramov wrote:
> I am configuring 2924 and I am trying to set a pass
I am configuring 2924 and I am trying to set a password for http.
I did:
line vty 5 15
password **,
However, instead of the password that I typed in, it uses my enable
password to log into the switch through http. What am I doing wrong?
Message Posted at:
http://www.groupstudy.com/form/re
Disregard that, I found the phone number, However, if someone knows why the
status
light stays orange please let me know.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8418&t=8416
--
FAQ, list archives, and subscription
I've got a problem with one of my sw. Status light stays orange. I can
not find TAC's phone number on cisco's web site. Would you please send
their support number.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8416&t=8416
TR Switch, is there any
special configurations I need set up on the router or switch for the
wake on lan to work.
Alexander Khramov
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8221&t=8221
--
FAQ, list archives, and
TR Switch, is there any
special configurations I need set up on the router or switch for the
wake on lan to work.
Alexander Khramov
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8079&t=8079
--
FAQ, list archives, and
Thanks a lot everyone I got. Config on RSM was not correct.
khramov wrote:
> What is the command to shut down VLAN 1 on a switch?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7507&t=7367
--
FAQ, list ar
know how to check for it. And I do not know if that could
cause a problem.
Thanks for you help.
Alex Khramov
Karen E Young wrote:
> The requirements for connecting a router to a switch running multiple VLANs
> have been posted to the list before do I won't go into great detail.
>
&
know how to check for it. And I do not know if that could cause a problem.
Thanks for you help.
Alex Khramov
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7403&t=7367
--
FAQ, list archives, and subscription in
>
> What are you trying to achieve?
>
> Alex.
>
> -Original Message-
> From: khramov [mailto:[EMAIL PROTECTED]]
> Sent: 06 June 2001 17:47
> To: [EMAIL PROTECTED]
> Subject:VLAN 1 [7:7367]
>
> What is the command to shut down VLAN 1 on
What is the command to shut down VLAN 1 on a switch?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7367&t=7367
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondis
I am configuring VLAN on 5505. When I run status shows that
it is not connected. I checked my cable run it seems fine and I checked
the config few times. Any ideas?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7341&t=7341
.
> Mike Bernhardt
> CCIE #6079
>
> To reply directly, yo know what to do...
>
> khramov wrote:
> >
> > Trying to set up a VLAN between 5505 with the RSM module and
> > 2924 Cisco
> > Catalyst Switch over 100baseFX. Everything seems to be working
>
Trying to set up a VLAN between 5505 with the RSM module and 2924 Cisco
Catalyst Switch over 100baseFX. Everything seems to be working
correctly except the VLAN on the 2924 shows shut down and can not be
brought up.
On 5505 we created VLAN, assign an IP address to the VLAN on 5505 and on
the VLAN
, workstations, etc..
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
""Fred Danson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> One thing that I ALWAYS notice when
article, you might find it useful.
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
""Keyur Lavingia"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This has actually
Try this:
http://www.tcpmag.com/salarysurvey/2001/default.asp
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
You might want to try a different Hyperterminal Program.
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
"Omer Ehsan Dar" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAI
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
72 matches
Mail list logo
