RE: Collision [7:59590]

I would clear the counters and wait a day and then post sho int again. Collisions are normal but the other errors are an indication of possible speed/duplex mismatch Stan -Original Message- From: Steiven Poh-(Jaring MailBox) [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 19

CCIE# 8971 [7:39110]

for only $2,000.00. If you would like additional information about his class, shoot him an E-mail at [EMAIL PROTECTED] Without Brian and his tutorage, all this would be just wishful thinking. Stan Zhang CCIE# 8971 Message Posted at: http://www.groupstudy.com

RE: Plugging into console port rebooted switch ... [7:13478]

If you are using a windows 2000 machine, you may need to upgrade the ios version on the switch. I ran into this problem on some catalyst switches that we are uing in our network. This a documented bug that you can find using bug tracker. Thanks Stan Rossetti NASA - PriSMS Advanced

RE: Question About Ciscowork [7:12621]

of the CW2K services. If you have all of your CW2K services set to automatic then the Ciscoworks software will try to start them once the daemon manager is turned on and then windows NT will try to start them as well, which causes a conflict. Thanks Stan Rossetti NASA - PriSMS Advanced Technology

RE: I want HP Openview [7:12298]

There is a free evaluation copy available at HP's web site. http://www.openview.hp.com/solutions/functional/smartway/cisco/index.asp Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group IP Phone: (256) 961-7097 Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin

RE: Switch to Switch Connectivity [7:11104]

Yes, I can see the cdp neigh from one switch, but not the oher. I have called the cable guys to come have a look at the cable, but they can't look at it until this afternoon or Monday. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group IP Phone: (256) 961-7097 Voice: (256) 544

Switch to Switch Connectivity [7:11104]

address??? There are no other devices connected to the switches at this time and the ip addresses assigned to the switches are in the same subnet and in vlan 1. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group IP Phone: (256) 961-7097 Voice: (256) 544-5031 Email: [EMAIL PROTECTED

RE: Cisco Works [7:10266]

You have to set up private and public snmp communities on the router/switches, add these ip addresses to Ciscoworks for discovery and also setup syslog statements on each router/switch. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group IP Phone: (256) 961-7097 Voice: (256) 544

No-Export [7:9565]

the advertisement of the bgp route outside my neighbor's network (as number) using the no export command. Is this the correct application for no export or are there better ways of skinning this cat? Where is my logic being lead astray? Thanks in advance for any help. Thanks Stan Rossetti NASA

RE: CW2k [7:6624]

You can do this using campus manager Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE -Original Message- From: John Chang [mailto:[EMAIL PROTECTED]] Sent: Thursday, May

CW2k Automated Action [7:483]

Has anybody setup an automated email action with CiscoWorks 2000. I am having problems sending out email notifications when a configuration change has been made or if a link goes down, etc... and Cisco has been of no help. Any ideas would be greatly appreciated. Thanks Stan Rossetti NASA

RE: CW2k Automated Action [7:483]

From the syslog service Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE -Original Message- From: Jeff Duchin [mailto:[EMAIL PROTECTED]] Sent: Friday, April 13, 2001 2

RE: Ciscoworks2000/TrafficDirector to baseline Gigabit Etherchannel l ink between Core Switches

I have worked with have CW2K and the 6509 switches and I you are able to look at the %: utilization, multicast, broadcast, errors, collisions, between these switches using the minirmon. You can also view the packet per second per tcp port used, packets per second per xcast (broadcast,

CiscoWorks Hardware Need to Operate Efficiently

is about 60%. I have over 2GB of swap space setup. The PC I am currently using was originally a workstation. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE

RE: CiscoWorks Hardware Need to Operate Efficiently

For comparison purposes, what other packages do you have installed? I have Resource Manager Essentials, Traffic Director, Campus Manager, Content Flow Monitor and of course CD-One. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL

Load Balancing Across Multiple PIX

across 2 PIX firewalls. Is this possible? Thanks in advance. Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE _ FAQ, list archives, and subscription info

RE: Private Vlans

l, even HE was confused. I quickly scanned the link you provided on www.cisco.com for more information information on private VLANs. Perhaps you could provide Timothy and myself with a more direct link? -- Leigh Anne Stan M. Hoffman, MCSE, CCNA Senior Network Engineer RealEC H

General Networking Question

y computer and select the database. Thanks in advance for your help. Please email me if you have any questions or solutions. Thanks!! Stan [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Non

RE: terminal length on Cat6509

Set length 0 Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE -Original Message- From: Edward Gomez [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 30, 2001 10:31 AM To: '[EMAIL

RE: 2900's

There is a known bug in some of the IOS versions for the 3500 series switch. You can go to Cisco's web site to find the exact version. The switch will sometimes reboot when connect through the console port. Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL

FS: 6 Cisco Books

6 Cisco Books For Sale. 1. Routing TCP/IP, by Jeff Doyle 2. Cisco LAN Switching, by Kennedy Clark / Kevin Hamilton 3. All In One Cisco CCIE Study Guide, by Roosevelt Giles 4. Designing Cisco Networks, by Diane Teare 5. Building Cisco Remote Access Networks, by Catherine Paquet 6. Advanced

RE: Minimum memory requirements for IOS 12.0.9

It depends on the type of router platform. Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE -Original Message- From: Daniel Young [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 04

RE: designing cisco networks book

or can be misleafing) take your time outline everything important in the case study then answer the questions Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-5031 pin 0112 CCDA, CCNA, CCSE -Original Message- From: Craig E

RE: NTP in an Enterprise Network

You can also source off of the internal calendar clock if you have 7200 series router in your network and therefore would not need an NTP server. Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-5031 pin 0112 CCDA, CCNA, CCSE

100BaseT Between Buildings

Does anyone know of a way to implement 100BaseT between 2 buildings that are ¾ (~ 4100 feet) of a mile apart? I think the distance limitation per segment is 200 meters. Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-5031 pin 0112

FS: WAN Switching Manuals

Hi I am selling these 5 WAN Switching manuals. 1. ICWS (Installing Cisco WAN Switches) Version 1.0, 1997 2. CWSC (Cisco WAN Switch Configuration) Version 1.0, 1997 3. BSSC (BPX Switch and Service Configuration) Version 2.0, 1998 4. MACC (MGX ATM Concentrator Configuration) Version 1.0, 1998

RE: HSRP question

If you have the preempt command on the primary device -Original Message- From: McCallum, Robert [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 21, 2000 6:58 AM To: 'Doug Laing'; [EMAIL PROTECTED] Subject: RE: HSRP question yes -Original Message- From: Doug Laing

RE: !H not a complete answer

I thought !A meant this path is blocked by an access list. -Original Message- From: Jennifer Cribbs [mailto:[EMAIL PROTECTED]] Sent: Monday, November 20, 2000 12:13 PM To: [EMAIL PROTECTED] Subject: RE: !H not a complete answer This response is returned when an access list somewhere

RE: !H !H !H!H

nreachable. An * is a timeout. !H is the return for what I said above but it is regarding a traceroute command, and not a ping. Jennifer Cribbs [EMAIL PROTECTED] = Original Message From "Rossetti, Stan" [EMAIL PROTECTED] = I thought !A meant this path is blocked by an access

FW: !H !H !H!H

-Original Message- From: Rossetti, Stan Sent: Monday, November 20, 2000 1:24 PM To: 'Jennifer Cribbs'; cisco; Rossetti, Stan Subject: RE: !H !H !H!H Are you sure? Page 1163 of Cisco IOS Configuration Fundamentals states that the character A signifies that the destination

RE: !H not a complete answer

I have always seen the !H replies when there is not a route to the destination and when there is an access-list blocking the router then the reply is !A using traceroute. -Original Message- From: Jennifer Cribbs [mailto:[EMAIL PROTECTED]] Sent: Monday, November 20, 2000 12:57 PM To:

Master Clock Source

to update it's clock when I changed the master clock source. How does the clock calendar-valid configuration work. I mean do I need to apply this command to all routers in the network? Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper:

Passed CCDA

Thanks to everyone. I passed the CCDA Friday morning. Time to start studying for the first CCNP test. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... _ FAQ, list archives

HSRP Betweem 6509 MSFC Blades

address errors. We did a hardware reset of the switch and reconnected the 1st and 4th floor switches and everything started working correctly. Any ideas? This make no sense to me and installing HSRP should not be an 8 ordeal. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED

Boson Test for CCDA

will not get a chance to read. Therefore, I was wondering if I could do a quick review, take a couple of Boson Tests and then pass the test. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112

RE: A unbelieveable experence!!!!

What IOS version have you guys seen this problem on?? -Original Message- From: John Hardman [mailto:[EMAIL PROTECTED]] Sent: Saturday, October 28, 2000 9:24 PM To: [EMAIL PROTECTED] Subject: Re: A unbelieveable experence Hi You are not alone! There is some bug when

How do I save the configuration on a 6506/9 Switch??

lt and non-default config. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

LAN Sniffer Software Pacakage (Free or Trial Version)

Does anybody know of a free or trial version LAN sniffer software package that I could use to temporarily to test the congestion on a 10BaseT Ethernet network? I saw an email from someone in this goup that I thought I had saved, but of course now I can't find. Thanks, Stan Rossetti Russia

SLOOOW Response Across Transatlantic Link

no buffers available to be allocated. Any help? Oh as far as the routing protocols. We are using eigrp with load balancing. The links are both 640k. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112

Erase 2916 Startup-config

Does anybody know how to erase the startup-config on a 2916 switch?? Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... _ FAQ, list archives, and subscription info: http

No Subject

How do you erase the flash on 2505 router. I have used the "del flash:" and erase flash:xxx" commands, but I keep getting the following error %Error deleting flash:/igs-d-l.103-17.bin (Device is read-only). The files are rw. Thanks, Stan Rossetti Russia Servi

NetRanger

Has anybody ever used NetRanger? Is it a worthwhile device? Also, can you monitor crc errors with it? Any information would be much appreciated. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... **NOTE: New

RE: calling all telco experts....framed/unframed mode

-- Orion -- MegaT -- MegaT (in Washington) - mux2(passthrough) --- mux3 - rtr2 -Original Message- From: Bart Kurek [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 06, 2000 10:47 AM To: Rossetti, Stan Subject: Re: calling all telco expertsframed/unframed mode

RE: calling all telco experts....framed/unframed mode

We have the same setup on one of our E1s (??). We continue to see CRC errors, but we can't seem to locate the problem. Is it clocking? Is a problem with the Orion CSU? We have performed tons of loopbacks and replaced just above all the equipment but we still see the problems. Is it related

RE: Collisions on Ethernet Lan

You are correct!! Look at the Cisco Internetworking Troubleshooting Handbook pg 78. -Original Message- From: Atif Awan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 30, 2000 11:30 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: Collisions on Ethernet Lan Everyone

Serial Line CRC or Input Errors!!

)/(output error packets) or (crc error total)/(input + output error packets). Do you use the number of packets or is it bits or is bytes. I would assume that you use packets. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112

Traceroute Source Address

not on the local network or across the WAN. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives

RE: Passed CCDA today...

Congratulations!! I will take the CCDA next week. I have been studying the Cisco CCDA book only. Any suggestions. -Original Message- From: Kris Jacobs [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 24, 2000 3:41 PM To: Thomas E. Hopson Jr. Cc: [EMAIL PROTECTED] Subject: Re:

2505/2507 Uses

Could somebody give me description of the 2505 and 2507 routers(?) and their uses. They seem like overpriced bridges to me. Am I missing something here?!? Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544

RE: Telnet Problems

The telnet access is allowed unless the router was rebooted and possibly lost its configuration. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... -Original Message

RE: Monitoring network throughput

Try this site Tony. http://www.caida.org/tools/taxonomy/ Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... -Original Message- From: Kent Hundley [SMTP:[EMAIL

FW: your mail

Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... -Original Message- From: Rossetti, Stan Sent: Thursday, July 20, 2000 4:11 PM To: 'Patrick A. Morin' Cc: '[EMAIL

RE: Quick question

Do a "sh ver" from the command line in user mode. It should have a line that says something like system restarted by power on or power reset. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183

IPSEC through a PIX firewall

re release of the IOS. Thanks in Advance, Stan M. Hoffman, MCSE, CCNA Senior Network Engineer Rare Medium Houston, TX smime.p7s