Off the top of my noodle that looks good
Happy Turkey Day!!
MADMAN
"Bullock, Jason" wrote:
>
> I did check the archives on this one.
> There has been much talk of fast ether channel for sure.
> But I did not find a definitive answer, so please humor me for this
question
> on Fast Ether cha
I did check the archives on this one.
There has been much talk of fast ether channel for sure.
But I did not find a definitive answer, so please humor me for this question
on Fast Ether channel.
I am configuring Fast Ether channel from a 7513 with 2 fast e ports to a cat
6009 with 2 fast e por
: Re: FastEtherchannel configuration
I just noticed...this was fixed in IOS 12.0(5.2)XU.
Chris M.
- Original Message -
From: "Chris McCoy" <[EMAIL PROTECTED]>
To: "David Jones" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000
avid Jones
Cc: [EMAIL PROTECTED]
Subject: Re: FastEtherchannel configuration
I just noticed...this was fixed in IOS 12.0(5.2)XU.
Chris M.
- Original Message -
From: "Chris McCoy" <[EMAIL PROTECTED]>
To: "David Jones" <[EMAIL PROTECTED]>; <[EMAIL PROTECT
I just noticed...this was fixed in IOS 12.0(5.2)XU.
Chris M.
- Original Message -
From: "Chris McCoy" <[EMAIL PROTECTED]>
To: "David Jones" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 7:59 PM
Subject: Re: FastE
P
pruning, causing the 6009 to shut off VLANs to a switch. It's quite
possible this is what's happening.
Chris M.
- Original Message -
From: "David Jones" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 11:01 AM
Subject: FastEtherc
Are you setting up trunking first.
Duck
- Original Message -
From: David Jones <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 11:01 AM
Subject: FastEtherchannel configuration
> Does anyone have any experience configuring FastEtherchannel on C
port group 1
switchport mode trunk
spanning-tree portfast
Dave
-Original Message-
From: Donald B Johnson Jr [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 02, 2000 6:56 PM
To: David Jones; [EMAIL PROTECTED]
Subject: Re: FastEtherchannel configuration
Are you setting up trunking first.
Does anyone have any experience configuring FastEtherchannel on Cisco
switches? I have two scenarios:
Cisco 3524 Cisco 6009 = Cisco 3524
Running two xover cables to each 3524. When I configure what I believe to
be correct on the 6000 and the 3500's assigning two ports each t
Assuming the server is running NT, FastEtherchannel is enabled on Compaq NC
series NICs through the Advanced Network Teaming and Configuration Utility
in the Control Panel. This utility is automatically installed when the
driver for those NICs are installed. The teamed NICs can be set to
get them to work
> together... it's a
> channel you need to configure. Since your subject includes
> FastEtherChannel,
> I presume you already knew this? But you do not mention it in your
> message?
> Sometimes there is a confusion between trunking and channeling. The
> fir
You do not need trunking on the ports to get them to work together... it's a
channel you need to configure. Since your subject includes FastEtherChannel,
I presume you already knew this? But you do not mention it in your message?
Sometimes there is a confusion between trunking and channeling
Are the Compaq servers using Tru64 Unix, Linux, or NT.
"Lex Luther" <[EMAIL PROTECTED]> wrote in message
8jq8lc$94b$[EMAIL PROTECTED]">news:8jq8lc$94b$[EMAIL PROTECTED]...
> Hello Everyone,
> One of my students has a compaq server with 2 nics, each configured on the
> Cisco 6500 switch. The
Did you set the native VLAN? 802.1q requires the setup of a native VLAN.
Martin...
-Original Message-
From: Bert Sainz [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 03, 2000 3:04 PM
To: Cisco
Subject: Re: FastEtherchannel using Compaq Servers
Lex Luther wrote:
> Hello Every
Message-
From: Bert Sainz [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 03, 2000 2:04 PM
To: Cisco
Subject: Re: FastEtherchannel using Compaq Servers
Lex Luther wrote:
> Hello Everyone,
> One of my students has a compaq server with 2 nics, each configured on the
> Cisco 6500 swi
Lex Luther wrote:
> Hello Everyone,
> One of my students has a compaq server with 2 nics, each configured on the
> Cisco 6500 switch. The Trunking is 802.1Q
> Both ports are configured identically but only one port works. Both ports
> are to work together to achieve the throughput speed.
> Span
Hello Everyone,
One of my students has a compaq server with 2 nics, each configured on the
Cisco 6500 switch. The Trunking is 802.1Q
Both ports are configured identically but only one port works. Both ports
are to work together to achieve the throughput speed.
Spanningtree is off as it is suppos
om: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Cristina Hoselins
> Sent: Wednesday, May 31, 2000 11:37 AM
> To: [EMAIL PROTECTED]
> Subject: FastEtherChannel!
>
> All,
> Fast Ether Channel is a trunking technology based on grouping together up to
> 4 full dup
PROTECTED]
Subject: FastEtherChannel!
All,
Fast Ether Channel is a trunking technology based on grouping together up to
4 full duplex 802.3 Fast Ethernets to provide fault-tolerant high-speed
links between switches, routers, and servers...My questions to you are:
How does it work? Which channel out of
All,
Fast Ether Channel is a trunking technology based on grouping together up to
4 full duplex 802.3 Fast Ethernets to provide fault-tolerant high-speed
links between switches, routers, and servers...My questions to you are:
How does it work? Which channel out of the four(2) channels is the def
20 matches
Mail list logo
