I ran across this question some time ago and kept the darned thing
because (I *guess*) I still have something to learn about IP ... . just
when I was *sure* I had it down cold. Could you lend a fella a hand?
Given the IP address of 193.243.12.43 and a subnet mask of
255.255.255.128, what is the
s use DLSW+!!! Well, needless to
say, I know some engineers that are brilliant in the real world, but missed
points due to their overquick reading of a question.
Raymond, thank you for including me the group that you did...I am highly
complimented!
By the way, I am moving from Germany to Texa
al Message -
From: Raymond Everson (Rainman) <[EMAIL PROTECTED]>
To: study group <[EMAIL PROTECTED]>
Sent: Wednesday, June 21, 2000 12:01
Subject: Sample Question Question
> I ran across this question some time ago and kept the darned thing
> because (I *guess*) I still have som
Hi all,
do you know how to config T1 line,
I am now using2 Cisco 7206 VXR model,
each Cisco 7206 has a 4 port T1 model card.
Now I want to use 4 T1 line to connect the 2 Cisco Router.
Router 7206 <---> T1 connection <---> MUX <> T1 connection <->
Router 7206
How to set the config ?
Has Cisco come out with a version of Cisco Secure VPN Client software yet,
that is compatible with Windows 2000. I can't buy laptops with NT anymore
and this is putting me in a real bind.
Thanks,
Brian
_
FAQ, list archives, and subscription info: http://www.group
How to use 10 Real IP for 100 COmputers
How to set the router support this configuration?
Please teach me and inform me what command I should use to set this
config...
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
Can anybody please help in solving this problem?
A router is connected to a T1 line which has the
maximum speed of 1.544mbps. The router begins to
forward 64bkps packet at 5000 packets per second,
there are 500 buffers available. Approximately how
long before the link is complelety saturated, the
Dear All
I have one project. My project is descripted as below:
1. LAN at headoffice: Has 70computers, using WindowNT, Switch 3COM 1100.
Running Accouting Program, Exchange Server...
2. LAN at branch office: Has 7 LAN, Each LAN has 10-15Computers, Using HUB
Required:
- Connect all LAN together
-
hi, anyone knows what is the purpose of a poison sap?
Jason
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PRO
can anybody tell me whether what books should i use to study CCNA 2.0 ( #640-507)? Is
the second ed. of CCNA Study Guide by Lammle enough or should i get any other books?
please advice?
kohposh.
___
Visit http://www.visto.
Hey all!
I have a question regarding an AS5300 and a command I believed to be =
implimented in 11.3. A customer of my company has an AS5300 running =
Cisco IOS 12.0(6), and is saying the command we told them to impliment =
on the AS5300's is not there.
The command was "aaa
Hi All,
I am hoping to be ready to take the CCNP Switching exam this Friday. Does
anyone know the number of questions and the passing score?
Thanks,
Tom
--
Tom Keough, CCNA MCSE
AT&T Global Network
Managed Router Solutions
Tier two support
Tampa, Fl
_
FAQ, list
Just out of curiosity...is there anywhere I could look up whether or not my
scores that I've achieved on the Cisco tests are adequate for the CCSI
certification? Thanks in advance.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisc
Can anyone please explain to me how to derive the answer of this
question?
A company has been assigned a subnet of 172.16.176.0/20, and wants the
next four available bits to create 14 subents, each containing an equal
number of hosts. Which of the following could represent one of these
subnets
5.0
172.16.186.0
172.16.187.0
172.16.188.0
172.16.189.0
172.16.190.0
172.16.191.0 ignore this one
(2n-2)=#of subnets thus giving us the 14 subnets
Reply Separator
Subject:Subnet question
Author: Hunt Lee <[EMAIL PROTECTED]>
Date: 1/28/200
I am trying to setup two routers with DLSW+ , when I do with routing ,I can'=
t=20
ping each other loopback interfaces for some reason.=20
Hostname DCE_Router
dlsw local-peer peer-id 10.1.1.1
dlsw remote-peer 0 tcp 10.1.1.2
dlsw bridge-group 1
Loopback0
=A0 ip address 10.1.1.1 255.255.255.0
i
I have my CCNA and I have 1 year and a half experiencebut I
don't know what SNMP means.. I only knows from what I heard. I heard that it
is a checking type protocol. I am not sure and I would appreciate if
someone can push me into the right direction or even explain it to me?? I
wou
. In
looking for answers to this question we have found conflicting
documentation. Some indicates that a new flow is established and other
docs indicate that the frame is switched per the original entry.
Thanks in advance for your thoughts.
Nathan Miller
_
FAQ
I have a class assigned for example: 198.144.163.1
mask 255.255.255.128 how do I subnet that to 2 networks.
__
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
_
F
Could someone please point me to a paper or web page that talks about how
memory is used on Cisco routers? Looking for an explanation on DRAM, Flash,
I/O memory, etc.
Thanks,
Jeff
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.ht
I think I'm unclear on some of the protocols here... for what purpose
would a protocol detect errors, but not correct them? Maybe QoS?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Do you know that the letters in "IOS" stand for? (Like in Cisco IOS 12.0)
Pierre-Alex
-Original Message-
From: Dale Cunningham [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 08, 2001 7:29 AM
To: [EMAIL PROTECTED]
Subject: Fwd: failure notice
Pierre
This came back into my mailbox t
I have a situation where I need to split a full t1 into 3 separate
interfaces. For example, channels 1-8 will be going
to one location, 9-16 will be going to a second and 17-24 will be going to a
third location. My question is what is
the smallest router/csu combo that will accomplish this? Will
Hi group
I'm studying for BCMSN. Could anyone give me some tips for this one. How
much do they ask on MLS and HSRP. What are the hot spots.
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondis
Hi all,
I am reading for the CIT exam and I saw something in the book
that seems alittle bit strange:
It says that in the sh int serial 2/3command the bandwidth =
parameter is
used to compute IGRP metrics only.
Does this means that we don't care (if we don't play with IGRP) what is =
the
Hello all,
I am wondering if some could help clear up a query in regards to router =
& network lsa's (Type 1&2).=20
Does the DR flood the router lsa type out to other segments in an area?=20
Thanks in advance..
_
FAQ, list archives, and subscription info: http
I will just like to enquire whether it is possible to have a VLAN split over
2 lans divided by a point-to-point Frame-relay wan.
VV
LL
AA
N 4MEG WAN N
50 50
At both LA
Hi,
I am preparing for CCDA. Could any one tell how important to remember
bytes of each type of traffic. For example DDP=13bytes, GNS client
broadcast=34bytes. Should i remember exact byte number or roughly size
is okay for test?
TIA
_
FAQ, list archives, and sub
Hello there,
Can anyone please teach me how can I check how much Flash and DRAM on a
router? Any help is greatly appreciated.
Regards,
Hunt Lee
IP Solution Analyst
Cable and Wireless (Sydney)
_
FAQ, list archives, and subscription info: http://www.groupstudy
Hello,
I wanted to ask what were the defaults for split horizon on frame relay. I
thought that split horizon was disabled on
1) FR interfaces without sub-ifs
2) FR multipoint interfaces
and enabled on
1) FR point to point interfaces
--
Jose Rodriguez
_
FAQ,
Please excuse my ignorance, but what the heck is the command to enable
events and messages to be displayed via a Telnet
session instead of the default console session? Thank you!
Damian Rizzo-CCNA+ Security, CNE, MCP
Senior IT Engineer
Marakon Associates
203-978-6341
[EMAIL PROTECTED]
___
What is the default timeout time for telnet connection a to a cisco router.
And what is the command to extend this time? I cannot seem to find either. I
can use the absolute-timeout command but that would also kick someone out
who was working on the router. I just want to set the default timeout t
I have a PIX using IPSec for a VPN tunnel between 2 networks. On the
outside interface is a box using SYSLOG trying to write to a box on the
inside interface. I made an external static IP for the internal box, added
a conduit to permit udp-syslog...nothing. Tried adding access-list # permit
udp
I am responsible for design a IPX network... We have a a 56k line
connects remote sites and there are about 6000 IPX services on a network
where would should I filter the saps at? the central router or the remote
router?
thanks
Koliy
__
A service SAP received without a route to that service is
A. Put on hold until the route is learned
B. Ignored
C. Installed in the SAP table
D. Forward to the Designate Router
/J
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.ht
Wanted to get everyone's input on this, every last statement on an
access lists should be some sort of permit all, right? Check out this
question, the answer is B. I thought it would be D. Any solutions to this,
or is this a wrong answer from the author !!!
1. Given the foll
I just recenlty asked Cisco this same question, and their answer is still
"Not yet, but soon".
-Original Message-
From: Parris, Brian [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 15, 2001 11:20 AM
To: '[EMAIL PROTECTED]'
Subject: Question
Has Cisco come o
yes
http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/index.htm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Parris, Brian
Sent: Thursday, March 15, 2001 8:20 AM
To: '[EMAIL PROTECTED]'
Subject: Question
Has Cisco come out with
If you wish you can use native PPTP tunnels in Win2K to the PIX until Cisco
gets a client out.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Parris, Brian
Sent: Thursday, March 15, 2001 11:20 AM
To: '[EMAIL PROTECTED]'
Subject: Question
x.htm
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Parris, Brian
> Sent: Thursday, March 15, 2001 8:20 AM
> To: '[EMAIL PROTECTED]'
> Subject: Question
>
>
> Has Cisco come out with a version of Cisco S
It was released last week.. It is available on CCO as of Monday this week...
If you have any problems getting to it, let me know...
Tim
""Parris, Brian"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Has Cisco come out with a version of Cisco Secure VPN Clien
what are HDLC tranfer modes used for?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Scenario:
Got a client who has a person on the network that does not want to
be on the network but wants access to the server. My thought was to install
a switch, setup to Vlans, one for all the users (10 or so) and the second
Vlan for the 1 user by himself. This way no one can get to his
I am monitoring multiple switches, but each port
creates a new page. How do I get all ports on a single
page?
Does anyone know where to find the the cisco product catalog for palm. or a
IP subnet calculator?
Marc Giroux
1501 McGill College, suite 600
Montreal (Quebec) Canada
Tel:(514)847-6866 FAX:(514)847-6802
Email: [EMAIL PROTECTED]
_
FAQ, list archives, and subscript
For those of you that have passed this test, how important is it to know the
various models of routers? I'm familiar with the different series routers
and what Cisco recommends them for (i.e., branch office, telecommuter,
central office), but do you have to know it down to actual port
configurati
I have recently passed the CCNA exam and I have the old version of the Cisco
Press CCDA book. Does this book contain enough information for me to be
successful with the CCDA ver 2 exam?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/c
Hello everybody
I need some help with the following:
Given the following
loopback 0
ip address 10.10.10.1 255.255.255.0
router ospf 1
network 10.0.0.0 0.0.0.255 area 0
sh ip route 10.10.10.1
known via connected loopback 0
distributed via ospf 1
10.10.10.1 255.255.255.255
what I want is to
Hi, I'm a newbie on this list. Is it possible possible to connect one B
channel to a location (Dallas) and the other B channel to another location
(New York) at the same time? How does one D channel control both calls?
_
FAQ, list archives, and subscription info
We have a training facility in my town.
They are *not* a Cisco Authorized Training Partner.
They bring in a guy from out of state who is a CCSI. He teaches some
classes, and then heads back.
Are CCSI's allowed to do this? My understanding was that a CCSI was not
allowed to do side jobs/unaut
Dear all,
I would like to know if I configure like this
Router <-> Firewall <-> Router or route-switch
Is it Firewall, such as PIX or CheckPoint do not pass routing table
between routers? The better solution is using IOS FireWall?
Thanks
Regards,
mak
_
FAQ, li
Hello group I have a general question. Is there any potential pitfalls
to watch for when implementing HSRP for redundancy.
Thanks for all imput
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
I have this router that someone must have entered no service =
password-recovery and I don't have the password. You are unable to get =
into Rommon to change the confreg. Is there a work around this or do I =
have to call Cisco.
Thanks
_
FAQ, list archives, and
I have this router that someone must have entered no service
password-recovery and I don't have the password. You are unable to get into
Rommon to change the confreg. Is there a work around this or do I have to
call Cisco.
Thanks
_
FAQ, list archives, and subsc
My understanding of how most switches work is that one port is mapped to one
MAC address, correct? If this is indeed true, what happens when you attach
a hub to a switch port? I know that it is still functional, but what does
the switch do for the additional hub MAC addresses that are hanging of
Does anyone knows any good liks with the CCNA practice question?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dear All,
I would like to know, suppose when I traceroute to www.cisco.com.
Each entry within my network displays very slow, once outside my
network, the entry display very fast. Why this happen?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info:
Hi,
For example, ip as-path access-list 20 permit ^100$
What is the ^$ stands for?
Thanks
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is it possible to specify a CIR for each DLCI on a router that has been
converted to a frame switch?
Thanks.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
. We use
10.210.X.X as our internal IP and the conflicting IP
was 169.254.X.X. We use DHCP server internally. This
router was connected to our network through Sonicwall
Firewall which disallows all the incoming traffic. So,
we removed the router and everything worked fine. So,
my question is "Is
Hello, everyone.
Actually, I got a vsd file containing lab topology.
Unfortunately, I can't open the file. Anybody there
can tell me how do I download the software and open the
file?
Thank you so much.
Gene
[EMAIL PROTECTED]
=
Gene Park
[EMAIL PROTECTED]
__
Hi all,
I have a question concerning Catalyst switches. I have two 3500's and one
1900 and when I try to release and renew an IP address on the 1900 it is
fine, but when I try on the 3500 it appears to drop the request. Is there
an IP-HELPER address on the switch such as there is on a r
I have a newbie question regarding a home test lab:
I have two ISDN routers 802 and 804 - Can I connect the ISDN interfaces back
to back to simulate a connect or do I need something else?
I also have the same question with T1 WIC's.
Thanks
_
FAQ, list arc
Consider the above OSPF network. You have configured a virtual path to
connect Area 3 with Area 0. What is your assessment of this network?
1. The network will work. However, you must configure a second
virtual link through router B to ensure there are no routing loops.
2.
Hi all:
Please help me.
I want to download an IOS from TFTP server to 2620 router.
The first method:
straight-through straight-through
2620Router->1924Switch->TFTPServer
It does not work. The router can not find TFTP server.
The Second method
Hi Group,
I'm facing problems setting up a VPN connection with Altiga and Windows
2000 CA server. (Using L2TP)
Can anyone advise/suggest the correct procedure of implementing the
solutions ?
Componets of of my Network are :-
1. A Cisco Router 3640
2. A Pix Firewall 515
3. Altiga 3000 VPN Concent
Again, the tcp/ip question
209.221.163.0/27 is subnetted, 1 subnets
D 209.221.163.0 [90/2221056] via 63.249.3.9, 13:31:00, Ethernet0
In this example I took off a router: the 209.221.163.0 is a network ip,
right? But what network, as in, where is the network--the router I am
Hi Group, just have a quick question. I have a cat 5500 currently has a
Supervisor Engine I. If someone tells me I need Supervisor Engine II, is he
talking about software or hardware? How am I going about changing it to
Supervisor Engine II? Thanks.
_
FAQ
What's the difference between NetBIOS and NetBEUI???
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_
FAQ, list archives, and subscription info: http://www.groupstu
legacy protocol guru's,
Forgive my ingorance on this subject I know almost nothing about SNA, SDLC,
BYSINC, etc...
Can you take an ip host and convert it to speak to an sdlc or bysinc
mainframe like you would enable an ethernet host to speak token ring?
Thanks
Cory
__
I have the following situation:
A company (alfa) needs to connect to a server inside my intra using an ISDN
connection (they do have a 1600)
I have a 1600 with 1 bri which is used to connect our net to a remote
support site (beta), I have a simple dialer map that open the connection to
this remote
>From Reading the RFC, it seems the the Multi-Exit-Discriminator and the
Local-Preference fields do the same thing. Additionally, it appears that
they are not redistributed outside of their Home A/s.
Questions:
1. What's the difference between them?
2. Do they do the same thing?
3. How do you
Hi,
I just configure Steel-belted radius and 2600 series for dial-up, it works
but if I enter the wrong password, the system just terminate the connection
without 2nd or 3rd retries. I already tried to set the steel-belted for 3
retries, but still the same, any suggestions? or do u suggest anothe
I'm planning on taking the CCNA test and later to CCNP. Although I never
took any CISCO classes, I have hands on experience. Is there perquisites?
Where do I take the exam, Sylvan? Is it all questions for both the CCNA and
CCNP?
Jeff
MCSE
**NOTE: New CCNA/CCDA List has been formed. For more
Hello Group,
My Name is Rajgopal and I am based in Bombay,India.I have a question for you
guys.
I have read in the CCNA 2.0 Exam Certification guide by Wendell Odom that a
DTE is the equipment that receives the Clocking information from a DCE which
is the device that sends the clocking
Title: copy configs
Hi there,
I wan to log alerts, critical, debugging, and
emergencies.
Is this will work.
r1(config)#logging console ?
alerts Immediate action
needed critical Critical
conditions debugging Debugging
messages emergencies System is unusable
Where can I find out what the newest version of the IOS software and
End-of-life product like a 3202 router will run?
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about your
What are the advantages/disadvantages/logic behind creating an access list
that would permit only the local subnet to access and enter a router's one
and only ethernet LAN interface? For instance, if one creates E0 to have
IP address 192.168.16.1/24 would it be sensible to create an access list
Dear group,
I have a question that is if a switch can simultaneously belong to more
than one vtp domain?
thanks in advance.
dean
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED
Title: RE: Question
I believe you're talking about Network Address Translation (NAT). The basic elements involved are a pool of real IP addresses, a source list, an inside interface (usually Ethernet), and an outside interface (usually some type of WAN, e.g. serial, T1, etc.).
Here i
NAT
>From: "Question!" <[EMAIL PROTECTED]>
>Reply-To: "Question!" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Question
>Date: Thu, 28 Sep 2000 05:04:57 +0800
>
>How to use 10 Real IP for 100 COmputers
>
>How to set the router
Lots of ways, however with 100 computers the best way is to use a
Network Address Translation or NAT configuration.
"Question!" wrote:
>
> How to use 10 Real IP for 100 COmputers
>
> How to set the router support this configuration?
> Please teach me and inform me wha
ip classless
ip route 10.10.24.1 255.255.255.255 10.10.1.11
access-list 5 permit 10.10.23.0 0.0.0.255
>>> Natasha <[EMAIL PROTECTED]> 09/27/00 07:33PM >>>
Lots of ways, however with 100 computers the best way is to use a
Network Address Translation or NAT configurat
Does STP only stop loops when the router boots? If I am building a loop
network, and then I boot up the final router with only one interface
plugged in (so it is not yet a loop), and then plug in the other interface
after the fact, what will happen? Will the other interface start in
blocking or
Greetings Group
Does anyone know what ports Napster usies for handshaking?
Inbound, outbound port number?
What would it take to block Napster?
Thanks
Tom Pruneau
Trainer Network Operations
GENUITY
3 Van de Graff Drive Burlington Ma. 01803
24 Hr. Network Operations Center 800-436-8489
If you n
Hello,
I have a scenario that needs explanation from somebody who knows how ISDN
switches work in carrier enviornment.
Lets say, I am connected to ISDN provided by LEC (GTE) in Dallas that needs
to be connected to a ISDN provided by Ameritech in Indy.
Here is the question, How long distance
Pardon me while I blatantly expose my Ignorance.
>From the SRB/DLSW chapter in the book "Cisco IOS Essentials". I am led to
believe that DLSw only works with Token-Ring based traffic. Is this
correct, or is it possible to take encapsulate (NetBios) Ethernet traffic,
shuttle it accross the IP
does anybody know if a sweep ping over a ds3 will simulate live customer data?
Lowell E. Sharrah
SBC-DataComm
517-241-7059 wk
517-360-0481 pgr
517-930-1993 cell
[EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
Hi
If I have two WIC-1DSU-56/64K Modules in two different routers can I use a
crossover cable between them, or will I need a some sort of switching
device.
Thank you.
Alex
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
I watched a little video on Layer3
switching from Cisco and I guess I never thought about this before, but you can
have different subnets on each switch port (layer3 of course)? I also have
a network design and I would really appreciate comments on it. Anyone with Visio
and an extra 10 minu
Does anyone know what the size of the ConnectRetry timer is?
Is this a configurable value?
If so what is the command used to configure it?
I checked the TAC and searched for ConnectRetry timer and got nothing of
suybstance back.
The RFC references the ConnectRetry timer but makes no mention
Does anyone know what the size of the ConnectRetry timer is?
Is this a configurable value?
If so what is the command used to configure it?
I checked the TAC and searched for ConnectRetry timer and got nothing of
suybstance back.
The RFC references the ConnectRetry timer but makes no mention
Does anybody know of any Palm programs to help study
for the CCNA exam? Are there any practise tests for
the palm?
-Hector
__
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/
**NOTE: New CCNA/CCDA List
Hi everyone- I have a career question I hope
someone can help me answer.. I am 23 years old, who is currently in grad
school for Telecommunications, I will be graduating in July.. My
undergraduate degree was also in Telecommunications.. I am also planning
on taking the CCNA and maybe
Hi everyone,
There is a web server on the inside of a firewall that is not implementing
NAT and the IP address is transparent to the outside world and people
accessing the server are using the IP address from browsing which is a
security risk (hole). Authentication is through TACACS+ or applic
Hi Everyone,
There is a web server on the inside of a firewall that is not implementing
NAT and the IP address is transparent to the outside world and people
accessing the server are using the IP address from browsing which is a
security risk (hole). Authentication is through TACACS+ or appli
Will the cisco 7206vxr support FRF.5 Frame Relay-ATM Interworking
function, which enables Frame Relay voice or data traffic to be
encapsulated in ATM cells.
If so does this mean I could map Frame pvc's within the atm ds3
interface on the router to talk to frame sites of mine?
On the satellite en
I have a question concerning trunk ports.
I am about to install two 2924M XL switches with the GBIC modules (both
slots are filled). I plan to connect both switches in parallel using the
GBICs for redundancy. I also need to connect to a 3640. I assume that both
the GBIC interfaces and a port on
How big are the buffers in question?
- Original Message -
From: Arun Upadhyay <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 10, 2000 12:01 PM
Subject: Question
> Can anybody please help in solving this problem?
>
> A router is connected to a
Hi Everyone,
There is a web server on the inside of a firewall that is not implementing
NAT and the IP address is transparent to the outside world and people
accessing the server are using the IP address from browsing which is a
security risk (hole). Authentication is through TACACS+ or applic
1 - 100 of 2000 matches
Mail list logo