Ravi,
Please check the T1 controller first and make sure the line is up.
You can find useful guide for T1 troubleshooting in
http://www.cisco.com/warp/public/116/index.html.It has a very good flowchart
for T1 troubleshooting.
There some config you should notice:clocking,line-code,framing and
, June 11, 2001 11:41 PM
Subject: RE: URGENT ! [7:8061]
Hth, well, you can't really answer that, since you didn't ask the question
can you???
The bandwitdh statement is NOT necessary, but it is always nice to add
while you're there anyway, so your routing protocols can
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers back
to
back each router have 2 FE and one T1 (dsu/csu)
When i tried to connect then back to back through the serial line
using show int
Serial 0/0 down and line protocol DOWn
i
Are you using the correct crossover cables?
Neil
Ravi Varma wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers
back
to
back each router have 2 FE and one T1
then you need something
to emulate a Frame Switch.
Do some searches on CCO. You will find exact examples of what you need.
-Original Message-
From: Ravi Varma [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 11, 2001 4:31 PM
To: [EMAIL PROTECTED]
Subject: URGENT ! [7:8061
Varma [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 11, 2001 5:31 PM
To: [EMAIL PROTECTED]
Subject: URGENT ! [7:8061]
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers back
to
back each router have 2 FE and one T1
! [7:8061]
Are you using the correct crossover cables?
Neil
Ravi Varma wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers
back
to
b
Enterprises, Inc.
[EMAIL PROTECTED]
~~~
-Original Message-
From: Neil Schneider [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 11, 2001 4:48 PM
To: [EMAIL PROTECTED]
Subject: Re: URGENT ! [7:8061]
Are you using the correct crossover cables
: URGENT ! [7:8061]
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers back
to
back each router have 2 FE and one T1 (dsu/csu)
When i tried to connect then back to back through the serial line
using show int
:31 PM
To: [EMAIL PROTECTED]
Subject: URGENT ! [7:8061]
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers back
to
back each router have 2 FE and one T1 (dsu/csu)
When i tried to connect then back to back
Hth? well, not really
what, exactly, is a bandwidth statement going to achieve?? would you enable
MultiLink-PPP by adding bandwidth 128000 to a BRI interface? - well
probably in your case
Oh yeh, and use show controllers for determining DCE/DTE
do we really have to put up with yet another
Connect all the routers together? Well if the serials are all going to
remote sites, connect the ethers to a switch/lan segment..
Brian Sonic Whalen
Success = Preparation + Opportunity
On Mon, 11 Jun 2001, andyh wrote:
Hth? well, not really
what, exactly, is a bandwidth statement going
Wow, if you had only put a couple more exclamation marks in your subject
line I may have been inclined to help you.
Ravi Varma wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all
]
~~~
-Original Message-
From: andyh [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 11, 2001 5:48 PM
To: [EMAIL PROTECTED]
Subject: Re: URGENT ! [7:8061]
Hth? well, not really
what, exactly, is a bandwidth statement going to achieve
If you know this, please disregard.
T-1 crossovers, 56k and ethernet crossovers are all different.
I beleive its 12 to 45 for t-1
12 to 78 for DDS{56k}, CDDI, and ATM 25 and 155.
HTH
Doug
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8112t=8061
15 matches
Mail list logo