Stus-List Stanchion size

Does anyone know the stanchion diameter for the C&C Mk 1. I need to get some replacement eyes. It is either 7/8 or 1inch but I am not at my boat to measure. Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 ged...@torkinmanes.com

Re: Stus-List Stanchion size

A Mk 1 what? 1 inch on a 35-3. Graham Collins Secret Plans C&C 35-III #11 On 2020-07-14 11:28 a.m., Glen Eddie via CnC-List wrote: Does anyone know the stanchion diameter for the C&C Mk 1.  I need to get some replacement eyes.  It is either 7/8 or 1inch but I am not at my boat to measure.

Re: Stus-List Stanchion size

Sorry, a 35 Mk1 Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 Torkin Manes LLP Barristers & Solicitors This email message, and any attachments, is intended only for the named recipient(s) above and may contain content that is privileged, confidential and/or exempt from disclosure unde

Re: Stus-List Puspit Gate Options

Dennis regarding the SD270500 stanchion eyes, I'm concerned that the eyelets might not be large enough to accommodate a traditional pelican hook - do you know offhand if they are? I suppose I could probably check on my boat next time I'm there : ) Thanks so much to everyone for all the insight and

Re: Stus-List Puspit Gate Options

If I wanted to keep the rail, would something like this possibly work? https://imall.com/product/316-Marine-Stainless-Steel-1-Boat-Rail-Fittings-Folding-Swivel-Tube-Pipe-Connector-Joint-Pole-Railing-Mast-Canopy/Sports-Entertainment-Water-Rowing-Boats/aliexpress.com/32845168779/144-27264739/en I wo

Stus-List Barient 27 winch servicing - still squeaks!

Hi all - The two Barient 27 primary winches on the Safari were in sorry shape, so last week I decided to service them. After a rather protracted battle I was able to disassemble and clean/oil/grease one of them to my satisfaction, however - when reassembling the first winch I realized that, while

Re: Stus-List Barient 27 winch servicing - still squeaks!

Yes and yes. I eventually got it off, but I can’t recall now how I did it (it was a while ago). Try using some penetrating oil and let it sit before hitting it again. I’ll take a look at mine and see if I can recall anything else I may have done. From: CnC-List On Behalf Of Andrew Means

Re: Stus-List Puspit Gate Options

I use Rigging Only (in MA) for lifelines, sheets, halyards, and the like. They will know what size you need for the pelican hook. From: CnC-List On Behalf Of Andrew Means via CnC-List Sent: Tuesday, July 14, 2020 12:40 PM To: cnc-list@cnc-list.com Cc: Andrew Means Subject: Re: Stus-List Pu

Re: Stus-List Barient 27 winch servicing - still squeaks!

Thanks Matt! I'll try some penetrating oil and see where it gets me. When you got the lifter arm off were you able to adjust the height so it no longer rubbed against the clamp ring? Or were you able to lubricate it a bit so it didn't squeak? Andrew On Tue, Jul 14, 2020 at 10:30 AM Matt Wolford v

Re: Stus-List Barient 27 winch servicing - still squeaks!

Sadly, it has been too long for me to remember what we did. I serviced all the winches on my boat several years ago – okay, everybody, you can chastise me now. I chuckled when I read that your boat uses size 27 for your primaries. I use mine for my spin pole topping lift. From: CnC-List

Re: Stus-List Barient 27 winch servicing - still squeaks!

I think the Barient 27s are measured somehow differently than Lewmar; they're roughly equivalent to a Lewmar 40, size-wise. What size boat do you have? Anybody have a good size comparison tool across winch brands? On Tue, Jul 14, 2020 at 11:16 AM Matt Wolford via CnC-List < cnc-list@cnc-list.com>

Re: Stus-List Barient 27 winch servicing - still squeaks!

My 27s are original Barient. My boat is a 1976 42 Custom (only six made, mine being the last one). I raced against it when I was kid. The original Baltic 42 was a sistership. Impressive looking boat. From: CnC-List On Behalf Of Andrew Means via CnC-List Sent: Tuesday, July 14, 2020 2

Re: Stus-List Barient 27 winch servicing - still squeaks!

https://l-36.com/compare.php for all your winch comparison needs...  :-) Graham Collins Secret Plans C&C 35-III #11 On 2020-07-14 3:49 p.m., Andrew Means via CnC-List wrote: I think the Barient 27s are measured somehow differently than Lewmar; they're roughly equivalent to a Lewmar 40, size-wi

Re: Stus-List Barient 27 winch servicing - still squeaks!

I misspoke... The line lifter was the wrong term. I meant the pressure plate. On Tue, Jul 14, 2020, 15:17 Josh Muckley wrote: > The screws that hold the spring tension on the line lifter are too tight > and are rubbing on the bronze spindle below. A series of small washers or > grinding of the

Re: Stus-List Barient 27 winch servicing - still squeaks!

The screws that hold the spring tension on the line lifter are too tight and are rubbing on the bronze spindle below. A series of small washers or grinding of the screws short will most likely fix the problem. All the best, Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Tue, Jul 14, 20

Re: Stus-List Barient 27 winch servicing - still squeaks!

I seem to remember reading the Barient size meant hundreds of pounds of design load. A "27" is designed for 2700 pounds of load. A "28" is designed for 2800 pounds of load. > On 07/14/2020 2:49 PM Andrew Means via CnC-List > wrote: > > > I think the Barient 27s are measured some

Stus-List 2020 C&C Rendezvous: Cancel due to COVID-19?

Last year, I volunteered to host of the upcoming 2020 Mid-Atlantic C&C Rendezvous in Baltimore MD in late-September. We recently returned from the relative safety of the Bahamas to a raging pandemic in the United States and it is far from being over, even though Maryland has done quite well in

Re: Stus-List Barient 27 winch servicing - still squeaks!

Conversion chart: https://l-36.com/compare.php Joel On Tue, Jul 14, 2020 at 3:36 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > I seem to remember reading the Barient size meant hundreds of pounds of > design load. A "27" is designed for 2700 pounds of load. A "28" is > d

Re: Stus-List Barient 27 winch servicing - still squeaks!

Josh I thought that was the issue as well (and the screws have definitely rubbed at some point in the past) but after adjusting the screws to make sure they weren't rubbing I still hear the squeak. On Tue, Jul 14, 2020 at 12:25 PM Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > I miss

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVID-19?

If the physical rendezvous is canceled, could this be an opportunity for a world-wide (virtual) rendezvous? People could sign up to give scheduled presentations/talks, we could have open video chat rooms for people to join, etc.. It could end up being just as edifying (albeit different) an experien

Stus-List 2020 Rendezvous

Bob, I think cancelling the 2020 Mid Atlantic rendezvous is the right thing to do. Better now that at the last minute. It’s just not worth the risk. We attend from Ontario and I doubt the border will even be open by October. We are definitely going to miss it and the great friends we have made b

Re: Stus-List 2020 Rendezvous

I sadly concur. The way things are going I am giving 50% odds we will be shut down again. Joe Coquina On 7/14/2020 4:47 PM, Len Mitchell via CnC-List wrote: Bob, I think cancelling the 2020 Mid Atlantic rendezvous is the right thing to do. Better now that at the last minute. It’s just not wo

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

I totally agree.  Now is not the time at our ages to gamble with the virus. I have not left the house since march, and not going to gamble now. It will end. We can schedule thenStay safe Jim Schwartz SEA YA ! 38 landfall Washington nc  Sent from my Verizon, Samsung Galaxy smartphone Orig

Stus-List Jumping the start battery in ACR environment

Following suggestions on this list, I purchased a NOCO Lithium battery 'jump starter' to have on board if/when I might need to jump my starting battery. Cheaper and lighter than another 12 volt battery and having done this many times in various cars I have owned over the years, it is no big deal

Re: Stus-List Jumping the start battery in ACR environment

Hi Charlie The ACR activates on voltage, so unless your jump pack is higher than 13v it won't combine the banks.  I seriously doubt it, but you could test it: with charging sources off and the switch in the "normal" position, verify that the ACR isn't active (there is an output on it that you

Re: Stus-List Jumping the start battery in ACR environment

A friend had to jump start his grand banks a couple springs ago, there were as I recall four 6 volt Golf cart batteries. I was a little worried about just your question, but it just cranked right up, cold. So, probably not a concern. BTW, I discovered that you don’t want to let those go de

Re: Stus-List Stanchion size

1 inch on Touché Dennis C. Sent from my iPhone > On Jul 14, 2020, at 10:13 AM, Glen Eddie via CnC-List > wrote: > > Sorry, a 35 Mk1 > > Glen Eddie > Tel: 416-777-5357 > Fax: 1-888-812-2557 > Torkin Manes LLP > Barristers & Solicitors > This email message, and any attachments, is intend

Re: Stus-List Jumping the start battery in ACR environment

If your boat is wired correctly, your ACR should allow charging the start battery when the house side has high enough voltage (not the other way round). So, the presence of higher voltage on the start side, should not open the ACR. Btw. If you connect on the house side, your portable battery wil

Re: Stus-List Puspit Gate Options

Andrew, Darn good catch. I am on Touche' right now and just tried to put a pelican hook through a stanchion cap. It fit up to the hinge pin. :) Then it sits cocked at an angle. No go for that plan. I suspect the Seadog caps would dolike wise. Dennis C. > > > > Dennis regarding the SD270500

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Bob, While I am not in the mid-Atlantic, I agree that any 2020 rendezvous should be cancelled. I’m all for a Zoom-C&C Online Rendezvous. I’d say that we’d have to make sure that David Risch covers his webcam, but he probably won’t show anyway. All the best, Edd Edd M. Schillay Captain of

Re: Stus-List Jumping the start battery in ACR environment

A full and idle state of charge is indicated by a voltage of 12.7. Anything higher is either an indication of a charge being applied or the phenomenon referred to as surface charge. Generally a "dead" battery will read 10.5v or less. You should typically avoid discharging below 11.6 for the most

Stus-List Zoom Rendezvous

I think the idea of a pre-scheduled zoom rendezvous is great. It is a chance to actually put faces on names and not have to worry about catching the virus or getting out of your pajamas to attend. Zoom is relatively inexpensive. You can get a free plan for 40 minutes – not time for much to ha

Re: Stus-List Zoom Rendezvous

Stu, It is $20 a month for a meeting that can accommodate up 100 participants for up to 24 h. You would have to make sure that you cancel before they charge you for the following month. Google Meetings (what used to be Hangouts) should be available at no extra cost. Marek Original m

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVID-19?

Personally I think that would be a fantastic idea. I could volunteer to reprise a presentation I gave my local RSA about my decision and process to buy a C&C. Cheers, Randy Stafford S/V Grenadine C&C 30 MK I #79 Ken Caryl, CO > On Jul 14, 2020, at 1:52 PM, Andrew Means via CnC-List > wrote:

Re: Stus-List Zoom Rendezvous

I have the zoom with unlimited zoom It a great idea when did you want to do it? On Tue, Jul 14, 2020 at 7:11 PM Stu via CnC-List wrote: > I think the idea of a pre-scheduled zoom rendezvous is great. It is a > chance to actually put faces on names and not have to worry about catching > the viru

Re: Stus-List Zoom Rendezvous

Stu, you shouldn’t need to purchase anything. We have a full-boat (pun...) version and can host a session. Others may have it too. Regards, Dave 1982 37’ Sent from my iPhone > On Jul 14, 2020, at 7:46 PM, Joel Delamirande via CnC-List > wrote: > >  > I have the zoom with unlimited zoom > I

Stus-List Zoom C&C Rendezvous

I have a Zoom pro account that can host up to 100 participants that we can use if you like. The PNW event was cancelled too. So, I would love to see us all get together...maybe from our boats even! Tom B At 04:42 PM 7/14/2020, you wrote:

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

What is the youngest age in this group and oldest I’m 40 On Tue, Jul 14, 2020 at 5:20 PM detroito91 via CnC-List < cnc-list@cnc-list.com> wrote: > I totally agree. Now is not the time at our ages to gamble with the > virus. I have not left the house since march, and not going to gamble now. > It

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Sent from my iPhone You win! Dennis C. > On Jul 14, 2020, at 7:27 PM, Joel Delamirande via CnC-List > wrote: > > What is the youngest age in this group and oldest > I’m 40 > > ___ Thanks everyone for supporting this list with your contribut

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

57. Therapy C&C 29-2 Solomons MD Sent from my iPhone > On Jul 14, 2020, at 8:28 PM, Joel Delamirande via CnC-List > wrote: > >  > What is the youngest age in this group and oldest > I’m 40 > >> On Tue, Jul 14, 2020 at 5:20 PM detroito91 via CnC-List >> wrote: >> I totally agree. Now is

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

I’m 36 Sent from my iPhone > On Jul 14, 2020, at 8:36 PM, Thomas Perison via CnC-List > wrote: > > 57. > Therapy > C&C 29-2 > Solomons MD > > Sent from my iPhone > >>> On Jul 14, 2020, at 8:28 PM, Joel Delamirande via CnC-List >>> wrote: >>> >>  >> What is the youngest age in this gr

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

I'm almost 63. But I act 24. 😎Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - u

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Wow, I think you win the prize~! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rob Hamlin via CnC-List Sent: Tuesday, July 14, 2020 8:53 PM To: cnc-list@cnc-list.com Cc: Rob Hamlin Subject: Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI I’m 36 Sent from my iPh

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

71 Sam Salter C&C 26 Liquorice Ghost Lake Alberta On Jul 14, 2020, at 6:36 PM, Thomas Perison via CnC-List wrote: 57. Therapy C&C 29-2 Solomons MD Sent from my iPhone >> On Jul 14, 2020, at 8:28 PM, Joel Delamirande via CnC-List >> wrote: >> >  > What is the youngest age in this

Stus-List Youngest & Oldest

From: Bill Coleman via CnC-List Sent: Tuesday, July 14, 2020 8:56 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI Wow, I think you win the prize~! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rob Hamlin vi

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

86 C&C 29 MKI Nemesis Niagara on the Lake, ON On 7/14/20 9:33 PM, Sam Salter via CnC-List wrote: 71 Sam Salter C&C 26  Liquorice Ghost Lake  Alberta On Jul 14, 2020, at 6:36 PM, Thomas Perison via CnC-List wrote:  57. Therapy C&C 29-2 Solomons MD Sent from my iPhone On Jul 14, 2020,

Re: Stus-List Barient 27 winch servicing - still squeaks!

As I recall I was able to successfully eliminate the squeal by removing the spacer plate in my 22ST. I'll investigate again. Josh On Tue, Jul 14, 2020, 15:45 Andrew Means via CnC-List wrote: > Josh I thought that was the issue as well (and the screws have definitely > rubbed at some point in t

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

How about 3/4 of a century + 1? Stu From: Bill Coleman via CnC-List Sent: Tuesday, July 14, 2020 8:56 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI Wow, I think you win the prize~! From: CnC-List [mailto:cnc-list-boun...@cnc-l

Re: Stus-List CnC-List Digest, Vol 174, Issue 61

I think I might take the cake... 35, same age as my 1985 35-3 Zella ~Luke On Tue, Jul 14, 2020 at 8:36 PM wrote: > Send CnC-List mailing list submissions to > cnc-list@cnc-list.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://cnc-list.com/mailman/listin

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Wow Doug, you are giving me hope! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Doug Robinson via CnC-List Sent: Tuesday, July 14, 2020 9:37 PM To: cnc-list@cnc-list.com Cc: Doug Robinson Subject: Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI 86 C&C 29 MKI Nem

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

77...might be the old winner Jim Schwartz SEA YA !38 landfall Washington nc  Sent from my Verizon, Samsung Galaxy smartphone Original message From: Stu via CnC-List Date: 7/14/20 9:40 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Stu Subject: Re: Stus-List 2020 C&C Rendezvous

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

I’m around 27. Second time around. (54) All the best, Edd ———- Edd M. Schillay Captain of the “Starship Enterprise” C&C 37+ | Sail No.: NCC-1701-B Venice Yacht Club | Venice Island, FL www.StarshipSailing.com ———- 914.774.9767 | Mobile ———- Sent via iPhon

Re: Stus-List Zoom C&C Rendezvous

Great idea I Would love to be included in the zoom call and yes can do it from the boat :) John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On Jul 14, 2020, at 8:14 PM, Tom Buscaglia via CnC-List wrote:  I have a Zoom pro account that can host up to 100 participants that we c

Re: Stus-List Zoom Rendezvous

It’s our new normal all this virtual everything I am a southeast regional sales manager And have been training , conferences , shows ... all virtual and sales are up! Would love to do a big meeting Think I have the 100 Occupancy Program :) John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfir

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

On Tue, Jul 14, 2020 at 7:28 PM Joel Delamirande via CnC-List < cnc-list@cnc-list.com> wrote: > What is the youngest age in this group and oldest > I’m 40 > > On Tue, Jul 14, 2020 at 5:20 PM detroito91 via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I totally agree. Now is not the time at our

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

I'm 61. On Tue, Jul 14, 2020 at 10:16 PM Paul Marble wrote: > > > On Tue, Jul 14, 2020 at 7:28 PM Joel Delamirande via CnC-List < > cnc-list@cnc-list.com> wrote: > >> What is the youngest age in this group and oldest >> I’m 40 >> >> On Tue, Jul 14, 2020 at 5:20 PM detroito91 via CnC-List < >> cn

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Can't beat either high or low (right between the last two) Marek Original message From: Edd Schillay via CnC-List Date: 2020-07-14 22:08 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Edd Schillay Subject: Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI I’m around 27. Seco

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

And I was sure you were older! > On Jul 14, 2020, at 5:54 40PM, Doug Mountjoy via CnC-List > wrote: > > I'm almost 63. But I act 24. 😎 > > > > Doug Mountjoy > sv Rebecca Leah > C&C Landfall 39 > Port Orchard yacht club > ___ > > Thanks everyone f

Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI

Jim You got me. Will be 77 in Nov. Don Kern Fireball C&C3 MK2 Bristol RI On 7/14/2020 10:04 PM, detroito91 via CnC-List wrote: 77...might be the old winner Jim Schwartz SEA YA ! 38 landfall Washington nc Sent from my Verizon, Samsung Galaxy smartphone On Jul 14, 2020, at 8:28 PM, Joel

Re: Stus-List Zoom Rendezvous

Hi, If needed I can set up a zoom for max occupancy of 300. - Paul E. 1981 C&C Landfall 38 S/V Johanna Rose Fort Walton Beach, FL http://svjohannarose.blogspot.com/ > On Jul 14, 2020, at 11:41 PM, cnc-list-requ...@cnc-list.com wrote: > > Date: Wed, 15 Jul 2020 02:19:26 + > From: John Conk

Re: Stus-List Youngest & Oldest

81 Alan Bergen On Tue, Jul 14, 2020 at 6:36 PM Stu via CnC-List wrote: > > > *From:* Bill Coleman via CnC-List > *Sent:* Tuesday, July 14, 2020 8:56 PM > *To:* cnc-list@cnc-list.com > *Cc:* Bill Coleman > *Subject:* Re: Stus-List 2020 C&C Rendezvous: Cancel due to COVI > > > Wow, I think you wi