Re: Stus-List scoring

#x27;s for instance do not allow for changing of sails unless there is a catestrophic failure during a series. No one as yet has taken a knife to their sails to get around the ruling. Changing a boat is a significant equipment change. -- Cheers, Jeff Nelson Armdale Yacht Club On 08/09/20

Re: Stus-List scoring

what equipment that is allowed to be swapped out in a series should be spelled out in the SI's. I'd still lean towards 2 entries, unless something catestrophic happened and the boat is being replaced with a same design hull. -- Cheers, Jeff Nelson Armdale Y.C. On 08/09/2013 9:15 A

Re: Stus-List Edson chain and wire pedestal failure

nk it was yours way back when...what will fit. They sent me a parts list and I made the order. It showed up promptly and it all fit! -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 10/09/2012 10:41 AM, djhaug...@juno.com wrote: Okay, Made the trip the Martha&

Re: Stus-List C&C 35Mk III Spinnaker Sheets / Guys

Really hard to just blow the guy with bowline's, if you want to unload the chute quick on takedown. Probably shouldn't have things flapping around anyways on the kite. -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 14/09/2012 2:15 PM, djhaug...@juno

Re: Stus-List Dip pole vs end for end gybes

ed, but it is usually dealt with over a rhum or two. Enjoy. Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. On 17/09/2012 7:03 PM, Dennis C. wrote: Oh,no! Not the dip pole vs end for end gibes discussion again? :) < note smiley face Joel, "Conventional wisd

Re: Stus-List Multi function chartplotter

from destination back to startthat being said, I can put up with that for the rest of it. In the end, they are both good systems and if you find the Raymarine works for you, then go for it. If you find it fustrating as I do, then go with something else. -- Cheers, Jeff Nelson Senior Ma

Re: Stus-List Multi function chartplotter

good to know Raymarine is evolving. It is good solid equipment and I might have gone that way had the e series been available to play with. Certainly would have made interfacing with the rest of my Ray equipment easier. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C.

Re: Stus-List Dropping the rudder on a 29-2

hould give ample room to clear the hull. On mine, someone had stripped the set screws, and rather than tap out a bigger one, put helicoils in...which weren't compatable with the surrounding metal, so had to cut that off too. -- Cheers, Jeff Nelson Senior Manager Halifax, NS P

Re: Stus-List Crazy surfers

out of our houses and in others denied access to our sports. I like my life, charish it, but I want to live it my way. That's why we live in a suposed free country. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 26/10/2012 6:22 PM, Chuck S wrot

Re: Stus-List Hot water heaters

FYI...The "CYA" no longer existsYep Canadian Yachting Association is gonewell in name at least. The new governing body is Sail Canada. Offical name change was voted in at the AGM last weekend. -- Cheers, Jeff Nelson Muir Caileag C&C 30

Re: Stus-List Yanmar Engine Petcock

ve of some type. -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 19/11/2012 10:34 AM, Steve Thomas wrote: Last year I drained the water from my YSB12 engine, muffler, and associated cooling system components before filling with antifreeze. The petcock on the en

Re: Stus-List Anyone with a 30 Mk1 in/near Sidney BC?

ing to the cockpit too. The one thing I really like is having the winches and traveler within easy reach of the helm. Very easy to single hand. My wife who is 5.2 finds the width of the cocpit just a bit too far for her to brace against, but then again she doesn't have to too much. -- Cheers,

Re: Stus-List AIS transponder

ut skipper took care of that so I can only guess when he actually sent it off. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 04/03/2013 8:02 PM, Joel Aronson wrote: There are several inexpensive AIS transponders with NMEA 2000 and built

Re: Stus-List AIS transponder

ship which was on a collision course with us...and, yes, he did see our AIS signal. So, fairly positive confirmation that the setup worked as intended. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 04/03/2013 8:42 PM, Antoine Rose wrote: A transponde

Re: Stus-List Roberts screwdrivers

And of course LeeValleyTools.com http://www.leevalley.com/en/Wood/page.aspx?cat=1,43411&p=43417 Fill your boots...you can get pretty much any style you like. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 12/03/2013 2:17 AM, Marek Dziedzic wrote

Re: Stus-List Engine Control Panels

marinized, I can buy 6 of them before I break even on the Yanmar original... If I end up replacing this one, I may go back to just wiring it to the circuit breaker on the panel and leave it at that. -- Cheers,     Jeff Nelson     Muir Caileag     C

Re: Stus-List Fw: Fw: (no subject) now AIS

erent directions in the vicinity at around midnight on the way to St. Pierre. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 25/03/2013 2:26 PM, Jim Reinardy wrote: I have also been intrigued by the Digital Yacht line, like this one: http://www.def

Re: Stus-List Question

Pipe expander used in muffler shops to flare pipe fittings might give you enough stretch. Princess auto:$14.99 http://www.princessauto.com/pal/product/8104416/Exhaust/Medium-Tail-Pipe-Expander- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 10/04/2013 7:34 PM, dwight veinot

Re: Stus-List vessel insurance survey

$1M required 3rd party liabilty. After that it's your own call. At our club and NSC in Ottawa. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 13/04/2013 12:26 PM, Steve Thomas wrote: Our club requires each boat to carry a 1 million liabili

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DC Panel "Ship's Circuits" Switches]

, once complete the all new railway will have much greater capacity than the old and tired one did. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 16/04/2013 11:01 AM, Knowles Rich wrote: That's encouraging. Better

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DCPanel "Ship's Circuits" Switches]

A Con-o-lift hydraulic self motivated trailer would be a better option for Armdale's application in my opinion. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 16/04/2013 11:13 AM, Knowles Rich wrote: Easy to sa

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DCPanel "Ship's Circuits" Switches]

I used the Non-Self Motivated one in Ottawa, we hauld about 200 boats twice a year with it averaging 20 minutes a boat. Always dreamed of the club purchasing the motivated one, as it would have been way more manueverable than the suburban. -- Cheers, Jeff Nelson Muir

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DC Panel "Ship's Circuits" Switches]

Jim isn't known for his suscinct writting skills. :-) Looks like we need to take somewhere between 6 inches and a foot off a little hill on the North? side about half way down track one. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Ar

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DC Panel "Ship's Circuits" Switches]

A very good question. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 16/04/2013 5:55 PM, Knowles Rich wrote: Hmm. How come that wasn't noticed before the track went in? Rich Knowles Indigo. LF38 Halifax On 2

Re: Stus-List Will we have a spring this spring? [was C&C 37+ DC Panel "Ship's Circuits" Switches]

I'm sure that would be spelled out in the contract. I don't have those details, unfortunately. -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 16/04/2013 6:16 PM, Knowles Rich wrote: So someone should foot the bill...?? Rich Knowles Indigo. LF38 H

Re: Stus-List Hot hot hot

Drive under a moose same as usual. "Hoyt, Mike" wrote: >___ >This List is provided by the C&C Photo Album >http://www.cncphotoalbum.com >CnC-List@cnc-list.com ___ This List is provided by the C&C Photo Album

Re: Stus-List Auto inflate PFD's

I have 2 Mustangs and 1 Spinlock. Mustangs are in the closet, Spinlock is worn. I bought it for the spray hood, and have to admit haven't had good opportunity to use it...hope I never will, but it was great in the pool with people splashing water at me. --- Cheers, Jeff N

Re: Stus-List C&C 30 Spreader to deck measurement?

Hmmm...any particular reason you need that measurement? I can go down and measure my flag halyard in the next day or so -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Y.C. Halifax On 29/05/2013 9:46 PM, Curtis wrote: any body

Re: Stus-List Bimini top - C&C 30 MK1

were forward and aft enough to not interfere when in the normal helming position leaned up against the forward end of the pushpit. - Leading zipper to attach full enclosure to dodger when not sailing. Food for thought. -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph

Stus-List Re: Racing rules- finishing

Hmmm... using the rules that expire this year.  I note next years rule book would fix this issue and I think further support my interpretation. My interpretation would be that there was a violation of rule 31 after finishing. Therefore you would not have finished and would need to sail back to

Stus-List Re: Racing rules- finishing

Should have added rules link to my previous reply https://www.sailing.org/documents/racingrules/ On 2020-09-22 6:47 p.m., David Knecht wrote: I was reading this article today about shooting the finish line in a race.  I have done this instinctively a few times, not realizing I was following in

Stus-List Re: Racing rules- finishing

Good point.  I do not believe there is any requirement to do the turn on the course side, only that you have to keep clear of everyone else...you would still need to "finish" by sailing to course side and back again.  Time would indeed still be running while you have not finished. Bit of a night

Stus-List Re: Tropical storm Teddy in NS

suffering any damage. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549 On 2020-09-24 12:51 p.m., Marek Dziedzic wrote: How did you guys survive the Teddy in Nova Scotia? I hope you fared better than Dennis in Pensacola. Marek Ottawa, ON *From:*Derek Kennedy *Sent:* 24 September,

Stus-List Re: Propane Locker - C&C 30 MK1

propane should never leak out the top anyway, assuming the vent in the bottom is blocked...but wanted to make sure there were no leaks other than the vent that was supposed to drain away propane. Hope this helps.  If I remember I can take some pics when I'm at the boat next. Cheers,   

Stus-List Re: Propane Locker - C&C 30 MK1

side until I mentioned it to him. He had to pack the cap somewhat blindly from the port side). Again my thanks for your advice. David *From:* Jeff Nelson *Sent:* Tuesday, September 29, 2020 7:41 AM *To:* cnc-list@cnc-list.com *Subject:* Stus-List Re: Propane Locker - C&C 30 MK1 Yes, I b

Stus-List Re: Propane Locker - C&C 30 MK1

was a rudder grease cap on the starboard side until I mentioned it to him. He had to pack the cap somewhat blindly from the port side). Again my thanks for your advice. David *From:* Jeff Nelson *Sent:* Tuesday, September 29, 2020 7:41 AM *To:* cnc-list@cnc-list.com *Subject:* Stus-List Re: Pro

Stus-List Re: Email Codes

I'm using gmail.  no issues here, but I'm using individual messages and not digest mode. Usually when you get lots of code in a message it is because the server has an unsupported character encoding set.  I think there is a new one out recently...perhaps some servers are still running older v

Stus-List Re: Strange tachometer reading

Here are some thoughts: When the tachometer (Ign. Sw.) is first turned on, pointer must go to between zero to 50 RPM . If not, check connections (if OK, tachometer is probably faulty). Voltages, with engine running should be: IGN to GND term

Stus-List Re: 3M 5200 and sealants

I believe also used for bedding keels to boats...from experience of taking one off. And I'd say likely the only two uses for 5200. On 2020-10-21 8:56 p.m., Dennis C. wrote: As others have said, 3M 5200 is an adhesive, not a sealant.  Virtually the ONLY place I use 3M 5200 is to PERMANENTLY GLUE

Re: Stus-List Yanmar push button died

place to look. -- Cheers, Jeff Nelson Muir Caileag C&C 30 Halifax On 17/09/2014 9:53 AM, Tony Wroblewski via CnC-List wrote: I have had the same problem on my Yanmar 3gm30 for years. Exactly as you describe. Since it would start on the second try all the time it was no problem.

Re: Stus-List Boat Software

This the one you are looking for: http://www.cinnamonsoftware.com/whats_where.htm -- Cheers, Jeff Nelson Senior Manager Halifax, NS Ph: 902-880-8243 On 04/02/2015 4:13 PM, Alan Bergen via CnC-List wrote: I'm looking for software that allows me to show the location of items s

Re: Stus-List speedometer - C&C 35 Mk2

That happened to me once.  I was only getting 0 speed.  One leg was missing, so paddle wheel wouldn't turn.  replaced with my back up and functioning fine after that. On 2020-08-05 10:43 a.m., Bill Coleman via CnC-List wrote: It is inconceivable that a magnet could be missing, unless you are

Re: Stus-List Insurance Provider?

I use:    https://www.eisenhauerinsurance.ca/ They have always been responsive to me.    Sail Canada promotes: https://skippersplan.com/    and I believe if you are a member you get a discount.  I think a fair number of people go with   skippers plan.   Hope this helps...   Jeff Nelson

Stus-List Re: Americas Cup racing

foiling survey vessels etc.  I am interested in watching how this technology evolves.  I haven't found a way to watch the races yet up here in NS Canada.  Maybe someone could share some tips. I do prefer the old boats, where crew work seemed to matter more than straight line speed. Ch

Stus-List Re: Americas Cup racing

Awesome.  Thanks On 2020-12-22 8:27 a.m., Dean McNeill via CnC-List wrote: Jeff, I’m in Halifax and I have watched them on YouTube… just search for Americas Cup. I’ve watched in real-time but they also have replays of various races and discussion shows. Too marvel at the technology! Dean C&

Stus-List Re: foils are here to stay

Yes, won't be long before we have foiling cruisers.  Thanks Alexander Graham Bell. On 2020-12-22 6:04 p.m., CHARLES SCHEAFFER via CnC-List wrote: Foils:  I find it very interesting that the 2024 summer Olympics scheduled for Paris will have new sailing classes with both "Windsurfing on foils"

Stus-List Re: Huge Problem Found

Ditto, except I started programing a couple decades later.  I have limited use for Microsoft. On 2020-12-28 8:46 p.m., Doug Robinson via CnC-List wrote: Well I am a Google Mail a/c and use Thunderbird as a replacement for Outlook and I have never had a problem.  Maybe you ought to replace Mi

Stus-List Re: Question for the group;

erson I call when planning a raft up.  He brings the patio. Cheers,    Jeff Nelson    Muir Caileag   C&C 30 - 549 Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution

Stus-List Re: [EXTERNAL] Re: Question for the group;

:-)  Thanks I'll add that to my argument next time I'm discussing with my friend. On 2021-01-05 9:37 a.m., Della Barba, Joe via CnC-List wrote: Not all cats float, which surprised me. I read about a Lagoon (maybe?) that sank around the Azores someplace. I had not thought that possible. If y

Stus-List Re: Screw removal

m off, when you put new in use a lot of never seize compound or teflon to separate the two materials. You might get lucky if you just drill the heads off the screws to get a vice grip on them for more power.  I've never had much luck with them tho. Cheers,   Jeff Nelson   Muir Caileag   C

Stus-List Re: Screw removal

CnC-List wrote: Try the old timer's trick.  A brace and Bit.  You can apply a great deal of force to prevent the bit from jumping out and at the same time a lot of rotational force. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 549 -- This email has been checked for viruses

Stus-List Re: loose mast wedges

Wedges are pretty easy to make out of hardwood block, just a few minutes on the table saw and you've got 30 or 40. Cheers,   Jeff Nelson   Muir Caileag   C&C 30 549 On 2021-01-21 12:09 a.m., Peter McMinn via CnC-List wrote: Risking another topic in tandem with my windlass question

Stus-List Re: Winch bit

US can get industrial Dewalt, but no one here carries that in Can that I know of. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 549 On 2021-01-23 10:39 p.m., cenelson via CnC-List wrote: A rigger I know uses a cordless Milwaukee right angle drill to hoist his crew (or for them to hoist h

Stus-List Re: mast climbing using a counter weight

Instead of going up, why not bring the mast to you https://www.youtube.com/watch?v=CInYj5P4evA Cheers,   Jeff Nelson   Muir Caileag   C&C 30 0549 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus Thanks to all of the subscribers

Stus-List Re: weather station (update)

Cool.  I think NSC had something like this many years ago, was located on one of the towers of the main clubhouse that no longer exist.  Lighthouse will be an excellent choice for location. Closer to the race venue and in largely clear air. Cheers,    Jeff Nelson    Muir Caileag    C&C 30

Stus-List Re: weather station (update)

I think someone is spoofing a location on you.   :-) I mostly use this one these days. https://www.smartatlantic.ca/station_alt.html?id=halifax I'd like to get one up and running at our club here at AYC. Cheers,   Jeff Nelson   Muir Caileag   C&C 30 0549 On 2021-01-26 11:22 a.

Stus-List Re: Digest emails

At least some.  Volume seems to be down, got 3 today, about 15 yesterday. On 2021-02-12 10:16 a.m., Stu via CnC-List wrote: Just checking – is anybody receiving digest emails with or without any problems. Stu Thanks to all of the subscribers that contributed to the list to help with the cost

Stus-List Re: Asymmetical Spinnaker outside jibe

es, I find them easier and less hassle generally than trying to squeeze that big sail through the slot...but I've done both and they both work. Cheers,   Jeff Nelson On 2021-03-10 8:44 a.m., John McLaughlin via CnC-List wrote: Please don't make such a simple thing so complicated. 

Stus-List Re: Asymmetical Spinnaker outside jibe

y, which won't work on the leeward side. We don't use the asym often enough to justify a sprit. How do you "lock off" the pole? -Original Message- From: Jeff Nelson via CnC-List Sent: Wednesday, March 10, 2021 9:04 AM To: cnc-list@cnc-list.com Cc: Jeff Nelson Subj

Stus-List Re: Asymmetical Spinnaker outside jibe

ng to try using an ATN tacker for jibes. Then I can move the pole at my leisure. -Original Message- From: Jeff Nelson via CnC-List Sent: Wednesday, March 10, 2021 9:45 AM To: cnc-list@cnc-list.com Cc: Jeff Nelson Subject: Stus-List Re: Asymmetical Spinnaker outside jibe I rigged mine as

Stus-List Re: Asymmetical Spinnaker outside jibe

From my past of peeling spinnakers, we would use a peeling strap, which was long enough to reach from tack to attachment point (in your case tacker).  Hook it up, ease the guy until the strap is taking the load, drop the guy, tack the pole, re-attach guy, load up the guy, blow the strap and winc

Stus-List Re: Hello?

Ditto.  Nothing in my spam folder...Maybe everyone is enjoying Easter. On 2021-04-04 9:00 a.m., WILLIAM WALKER via CnC-List wrote:  So, I haven't gotten any emails for a couple days.  None in spam or trash.  Is it just quiet? Bill Walker Thanks to all of the subscribers that contributed to the

Stus-List Re: 1986 C&C44 FOR SALE

Yep.  I was on the boat before it left Armdale for Caribbean. Looked pretty good then, and I know Dan's been doing more fixing along the way.  You can find video's on youtube under "sailing balachandra". Cheers,    Jeff Nelson    Muir Caileag    C&C 30 Mk1. On 20

Stus-List Re: 1986 C&C44 FOR SALE

Here's a boat tour vid shot about 3 months ago... https://www.youtube.com/watch?v=yL7cfMhKdzs Cheers,    Jeff Nelson    Muir Caileag    C&C 30 Mk1. On 2021-04-13 7:34 p.m., Joel Delamirande via CnC-List wrote: Nice boat On Tue, Apr 13, 2021 at 5:29 PM Dan via CnC-List mailto:cnc

Stus-List Re: Race Photos -> previous...Re: Question re heater transom exhaust thru hull

That looked like a great race. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to se

Stus-List Re: Race Photos ->

Yeah, love CB.   We did the last race the cape in J-29 Jahmon, then did last East Bay Regatta in J-105 Jahmon.  Hoping regatta scheds will hold to get up there again this year. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549    Halifax, NS On 2021-05-05 10:31 a.m., Hoyt, Mike w

Stus-List Re: teak ladder treads

Like this: https://neotimber.com/decking/inspiration/colours/teak-composite-decking/ I'm sure someone in North America does this... Cheers,   Jeff Nelson On 2021-06-07 1:03 a.m., CHARLES SCHEAFFER via CnC-List wrote: I'd look for a plastic/composite decking product and make treads

Stus-List Re: teak ladder treads

Wow $8/board ft is cheap.  Up here $38/board ft.  Almost cheaper to buy a boat with good teak steps than to replace them.  I priced out lumber for a small bed stand table in white oak was going to cost me $600.  Guess it's time for me to buy a mill.  I have 45 acres of wood growing...unfortunate

Stus-List Re: 33-2 chainplates / galvanic corrosion problem

own to the hull (carefully) and pop them out. Good luck.    Jeff Nelson    Muir Caileag    C&C 30 Mk 1 - 549 On 2021-06-08 9:23 a.m., Bruno Lachance via CnC-List wrote: I will go back to the boat later today and try again to loosen the parts. Korbey I thought about using a torch, but hones

Stus-List Re: Gooseneck fitting source?

Got mine from South Shore Yachts.  bolted right up.  They make them out of stainless steel, the originals were cast aluminum...not sure if yours is the same. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 mk 1 0549    Armdale Yacht club On 2021-06-14 5:18 p.m., Bruce Whitmore via CnC-

Stus-List Re: eFlares in Canada

Your sailing association should be able to dig that answer up for you. OntarioSailing.ca Glen Lethbridge Toll Free:   (888) 672-SAIL (7245)ext: 3224 email:  execdir at ontariosailing.ca On 2021-06-16 8:50 p.m., Marek Dziedzic via CnC-List wrote: Hello, This is a question to Canadian list membe

Stus-List Re: Broken Bolt in Epoxy

-fiberglass the transom and start over.  The boats are plastic, and can be glued  back together indefinitely.  Obviously to make it structural and cosmetic, some skill is required with Fiberglass. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549 On 2021-07-20 3:41 p.m., Bill Coleman

Stus-List Re: Broken Bolt in Epoxy

Glad it ended well. Cheers,   Jeff On 2021-07-23 10:17 a.m., Bill Coleman via CnC-List wrote: Well, Adrian wins the Bronze Thunder Mug - I put a 90/130 watt soldering gun on the stud for about 3 minutes, put some Garr-Pike Vice-Grips on, JUST 2 THREADS showing to grab onto! I couldn't believe

Stus-List Re: Checking the list

I believe there is only 1 lock at St. Peter's (double gate, but one lock), and a swing bridge. There is another bridge at Iona to make it up through the narrows if you want to enter/exit from the North. Cheers,    Jeff Nelson    C&C30 0549 On 2021-08-03 7:36 a.m., Ken Heaton via

Stus-List Re: the rum is gone! (and the boat too)

I've got an unused week of vacation, if you need delivery crew for somewhere. Still having a hard time coming to grips with your loss.  I can't imagine loosing mine. Best of luck, let me know if you need anything. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 0549    Ar

Stus-List Re: Refurbishing CNG fittings

This is a good source, I don't know of anyone locally...if you find one let us know: https://www.fairviewfittings.com/products/gas-control-components/ Cheers,    Jeff Nelson    Muir Caileag    C&C30 - 549   Armdale Yacht Club On 2021-09-27 10:30 a.m., Hoyt, Mike via CnC-List wrote

Stus-List Re: leeward layline

a good article to get you thinking: http://www.oceansail.co.uk/Articles/VMGArticle.php Hope this helps. Jeff Nelson Muir Caileag C&C 30 549 Armdale Yacht Club On 2021-10-06 12:02 p.m., Bob Mann via CnC-List wrote: I'm fairly new to flying a spinnaker.  I did it last weekend in a race and I

Stus-List Re: leeward layline

e out all the VMG stuff. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 0549    Armdale Yacht Club On 2021-10-06 1:25 p.m., Bob Mann via CnC-List wrote: I don't understand how either answer is telling me it's time to gybe. Bob On 10/06/2021 11:37 AM Shawn Wright via CnC-List

Stus-List Re: leeward layline

Mike, You know that all Helms and Tacticians expect the crew to be America's Cup experts. I guess that's why the Foredeck Union came into being. :-) Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 0549    Armdale Yacht Club On 2021-10-06 1:42 p.m., Hoyt, Mike via CnC-List w

Stus-List Re: leeward layline

uld imagine the arrow is pointing somewhere aft indicating your apparent wind which should be forward of your stern a bit.... Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549    Armdale Yacht club On 2021-10-08 12:15 p.m., Bob Mann via CnC-List wrote: I still need to review the geom

Stus-List Re: leeward layline

dn't be your layline, as you need a course of 310. Also, if I use any of those course numbers, they will remain constant, whereas the bearing to the mark will constantly change as you get further from the rhumbline (dead down wind). Cheers,    Jeff Nelson    Muir Caileag    C&C30 - 549   

Stus-List Re: leeward layline

Don,    I think you meant this for Bob, who is trying to find a clever way of determining the layline bearing. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549    Armdale Yacht Club On 2021-10-12 12:11 p.m., Don Kern via CnC-List wrote: Jeff, Let me assume that your boat is simila

Stus-List Re: leeward layline

min chartplotter, on the J-105 we have all raymarine with a plethora of data sources and displays to give us all kinds of useful and useless information. Cheers,    Jeff Nelson    Muir Caileag    C&C 30 - 549    Armdale Yacht Club On 2021-10-12 4:28 p.m., Bob Mann wrote: Jeff, You are corr

Stus-List Re: Donations

In the footer of the message... On 2022-01-05 13:32, Brian Davis via CnC-List wrote: Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution --https://www.paypal.me/stumurray

Stus-List Re: Rudder issues

can find around the yard to alert people they are backing into my boat!  Njord and I suffered the same fate, same delivery driver, 2 different clubs one year.  I think I've exhausted the used rudder market in Nova Scotia, so next one will be my buddies in CCI, Ottawa. Cheers,    Jeff Nelson

Stus-List Re: Abnormal list things

Everything normal for me, but I'm only getting 4 or 5 messages a day.  I've been looking in spam etc, but that's all I'm seeingso something I think is screening out the normal volume. Cheers,   Jeff Nelson   Muir Caileag   C&C 30 - 549   Armdale Y.C. On 2022-02-0

Stus-List Re: PHRF named vessels

East coast Canada should all be here: https://www.sailnovascotiaydb.ca/yachts Search on C&C and select all will give 156 entries...or adjust if you want a specific model. Except possibly Newfoundland...not sure if they use SailNS ratings or not. Cheers,    Jeff Nelson    Muir Caileag   

Stus-List Re: Test One

Mary had a little lamb. 5x5 here. On 2022-02-02 14:26, Joe Della Barba via CnC-List wrote: Testing email 1 2 3 Test One Two Three

Stus-List Re: Test One HTML

If it was supposed to have "Testing email" as an html attachment didn't get an attachment. Just got exactly what you see below. Using Thunderbird as email. On 2022-02-02 14:53, Joe Della Barba via CnC-List wrote: This one is sent in HTML mode -Original Message- From: Joe Della Barba

Stus-List Re: PHRF named vessels

Well, really you should thank Sail Nova Scotia whose people did all the work.  :-) I'm only the messengerbut I appreciate the accolades. Cheers,     Jeff Nelson     Muir Caileag     C&C 30 - 549     Armdale Y.C. On 2022-02-02 14:44, Richard Bush via CnC-List wrote: Jeff, that

Stus-List Re: [EXTERNAL] Re: Stus test 1

Say that 3 times quickly.. On 2022-02-08 08:51, Della Barba, Joe via CnC-List wrote: Plain text test -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C.

Stus-List Re: List problems

I wonder if it is some sort of security setting, when it scans the email, if it has html or other scripting languages it puts it in an attachment so that it doesn't allow a virus on open. Just a thought. -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C. There are

Stus-List Re: Test 1

since 3/12 Please trim your messages before sending to the list. Thankx -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C. Please trim your messages before sending to the list. Thankx

Stus-List Re: list removal?

I think if you just put unsubscribe in the subject and send it to the list you will be removed. On 2022-03-21 20:37, Richard Walter via CnC-List wrote: Greetings, Can I please have my email address removed from the CnC-list? Thank you, Richard J. Walter -- Cheers, Jeff Nelson Muir

Stus-List Re: testing list

4 5 6 7 On 2022-04-05 08:51, Joe Della Barba via CnC-List wrote: 1 2 3 -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C.

Stus-List Re: Cost to replace UV cover

I had a similar experience when a new crew sheeted in the headsail through the spreader.  Real blast getting it off, and didn't really do the sail much good.  :-) The saying most often heard on the boat now is to the spreader, not through the spreader. -- Cheers, Jeff Nelson Muir Ca

Stus-List Re: Cost to replace UV cover

ust a complete circus.  I don't mind watching circuses while drinking my rhum. -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C. On 2022-06-21 09:23, Bill Coleman via CnC-List wrote: So, do you zip down to your sheets, and zip up to them, or do you take the sheets off

Stus-List Re: Hull number serial number identification country of manufacture

7C84df9e7fe9f640afb435%7C1%7C0%7C637916104152524265%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PK%2FYwnxqWx4XMXYZFP81N9%2FrYcsgDcBJADxd%2FfEBN6E%3D&reserved=0> Motion Designs Limited 647 990 7752 -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C.

Stus-List Re: Yanmar 2 GMF

. -- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C. On 2022-06-28 11:10, Robert Abbott via CnC-List wrote: Prop is cleanshouldn't matter if the prop is dirty, the engine won't rev above 2,100 RPM's when in neutral. On 2022-06-27 12:32 p.m., Korbey Hunt

Stus-List Re: Yanmar 2 GMF

throttle by hand to see if it changes anything. On 2022-06-28 11:13, Jeff Nelson via CnC-List wrote: So that pretty much narrows it down to Fuel or exhaust.  Have you checked your mixing elbow to ensure it is clear?  Restriction would certainly keep the revs from going up.  After that it likely gets

  1   2   >