Re: Stus-List [EXTERNAL] Standard Horizon Intrepid VHF

Actually, the Standard Horizon Intrepid, like many SH VHF's, can be programmed for MMSI twice. If it's only been programmed once, a second owner can re-enter another MMSI. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Aug 26, 2020 at 5:01 PM Doug Mountjoy via CnC-List < cnc-list@cnc-list

Re: Stus-List [EXTERNAL] Standard Horizon Intrepid VHF

You can also have a dealer erase the old MMSI #. Doug Mountjoysv Rebecca Leah  C&C Landfall 39Port Orchard yacht club null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to s

Re: Stus-List [EXTERNAL] Standard Horizon Intrepid VHF

You can leave the MMSI programmed and just transfer the number to the new owner. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Wed, Aug 26, 2020, 13:29 Dennis C. via CnC-List wrote: > The critical question is "has the MMSI only been programmed one time?" It > can be programmed twice.

Re: Stus-List [EXTERNAL] Standard Horizon Intrepid VHF

The critical question is "has the MMSI only been programmed one time?" It can be programmed twice. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Aug 26, 2020 at 10:21 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Is the MMSI programmed? > > J > > > > *From:* CnC-Li

Re: Stus-List [EXTERNAL] Standard Horizon Intrepid VHF

Is the MMSI programmed? J From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay via CnC-List Sent: Wednesday, August 26, 2020 10:38 AM To: cnc-list@cnc-list.com Cc: Edd Schillay Subject: [EXTERNAL] Stus-List Standard Horizon Intrepid VHF Listers, Since my RAM 23 mic c

Re: Stus-List [EXTERNAL] Re: New-guy C&C 40 Shopping questions

Hi Joe, Indeed, I priced out the hydraulic systems and they are pushing 3-4k in parts. $1500 for the ram alone. On Tue, Jul 21, 2020 at 1:42 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > A wheel pilot is about $1500 and a DIY job. A hydraulic inboard autopilot > is much more

Re: Stus-List [EXTERNAL] Re: New-guy C&C 40 Shopping questions

A wheel pilot is about $1500 and a DIY job. A hydraulic inboard autopilot is much more. The 40 is too much boat for the wheel pilot in some conditions, mainly off the wind with some seas running. J From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jeffrey Brideau via CnC-List

Re: Stus-List [EXTERNAL] Re: Listers Age Range

If all the books I have are true, than not knowing how to sail didn’t stop a lot of people. They figured it out or didn’t live long enough to write anything! Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Delami

Re: Stus-List [EXTERNAL] Re: Broken pin in electronic connector

Can you send me your mailing address? J From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Thursday, June 25, 2020 8:51 AM To: 'cnc-list@cnc-list.com' Cc: Hoyt, Mike Subject: [EXTERNAL] Re: Stus-List Broken pin in electronic connector I will send S

Re: Stus-List [EXTERNAL] Re: Argh!!! Jetski rear-ended us! Help?

Except that was damage to the OTHER boat. I don’t think the $20K refers to the jetski. Joe Ps – could be worse, we had a Catalina 27 (iirc) vs. tanker collision near Sandy Point and the Catalina 27 insurance was billed something like $300K for towing and inspection fees to get the tanker going

Re: Stus-List [EXTERNAL] Battery Charger

Just before it comes you hear this squeak like there's friction.  Not like static or anything. Sent from Yahoo Mail on Android On Mon, Jun 15, 2020 at 9:50 AM, Della Barba, Joe via CnC-List wrote: ___ Thanks everyone for supporting this list w

Re: Stus-List [EXTERNAL] Battery Charger

Do you mean something you hear on the SSB or VHF from interference or the charger is literally squealing? Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter Cowenhoven via CnC-List Sent: Monday, June 15, 2020 9:40 A

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

That’s ok too. Boats are boats. Whatever you like. Do it. It’s a passion sometimes. If she floats and looks good after 40 plus years good On Sat, Jun 13, 2020 at 6:08 PM Dave Godwin via CnC-List < cnc-list@cnc-list.com> wrote: > “That is exactly how the job should be done.” > > Perhaps. > > I’m go

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

“That is exactly how the job should be done.” Perhaps. I’m going to keep my thoughts confined to hulls that are sprayed, not roll-and-tipped. I’ve found that there are varying degrees of paint jobs done to boats. This I’ve learned from having my hull painted and from painting the topsides myse

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

p the cost of painting the deck, not > including the core repair in the cockpit, if anyone is interested. > > Rick Brass > > -Original Message----- > From: "Della Barba, Joe via CnC-List" > Sent: Jun 12, 2020 8:24 AM > To: "cnc-list@cnc-list.com" >

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

f painting the deck, not including the core repair in the cockpit, if anyone is interested.Rick Brass-Original Message- From: "Della Barba, Joe via CnC-List" Sent: Jun 12, 2020 8:24 AM To: "cnc-list@cnc-list.com" Cc: "Della Barba, Joe" Subject: Re: Stus-List [E

Re: Stus-List [EXTERNAL] Re: Roll-Up Inflatable Dinghies and Motors

I have an Avon 340 RIB with 15 HP. It fits in my slip, but Ed does not seem to have any place to put a dinghy at his club. It is a nice boat even as a stand-alone boat, but it is whole different thing than rolling up a soft inflatable and putting it below. Joe Della Barba Coquina C&C 35 MK I ww

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

c: "Della Barba, Joe" Subject: Re: Stus-List [EXTERNAL]   Re:  boat painting in Washington NC I am getting a bit confused. “Hull” to me means the waterline and up, not bottom paint. The deck is the deck. “Topsides” is generic for anything that isn’t bottom paint. So is $125/ft. th

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

: Della Barba, Joe > Subject: Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC > > I am getting a bit confused. > “Hull” to me means the waterline and up, not bottom paint. The deck is the > deck. “Topsides” is generic for anything that isn’t bottom paint. > S

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

FWIW, “hull” to me means from the gunwales down. Freeboard is the section between the gunwales and the waterline. From: CnC-List On Behalf Of Della Barba, Joe via CnC-List Sent: Friday, June 12, 2020 8:25 AM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Re: Stus-List [EXTERNAL

Re: Stus-List [EXTERNAL] Re: boat painting in Washington NC

I am getting a bit confused. “Hull” to me means the waterline and up, not bottom paint. The deck is the deck. “Topsides” is generic for anything that isn’t bottom paint. So is $125/ft. the hull, the deck, or both? Thanks! Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List

Re: Stus-List [EXTERNAL] Euro style electrical connectors

I have found them on Amazon and FleaBay. I am not a huge fan, the quality is variable. They are nice for experiments where you will be rearranging things. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via C

Re: Stus-List [EXTERNAL] Re: Loss of coolant

club Original message From: dwight veinot via CnC-List Date: 5/13/20 10:27 (GMT-08:00) To: cnc-list@cnc-list.com Cc: dwight veinot Subject: Re: Stus-List [EXTERNAL] Re: Loss of coolant Joe can you tell me if it is common practice to run hot coolant from the engine straight into the

Re: Stus-List [EXTERNAL] Re: Loss of coolant

Oh yeah thanks for reminding me of that one! :-(. In addition to replacing the head gasket, I also had two big radiator bills from the blow by of the head gasket ! Bill Coleman On Wed, May 13, 2020, 1:34 PM Shawn Wright via CnC-List < cnc-list@cnc-list.com> wrote: > Not sure if this is common o

Re: Stus-List [EXTERNAL] Re: Loss of coolant

Not sure if this is common on Yanmars, but on VW diesels, a common source of slow coolant leaks is the head gasket. There are a few places where coolant passages can seep coolant into the combustion chamber, which occurs during cooldown when the engine is stopped. During operation, the higher press

Re: Stus-List [EXTERNAL] Re: Loss of coolant

Joe can you tell me if it is common practice to run hot coolant from the engine straight into the hot water tank heat exchanger and from the there into the engines heat exchanger. For some reason whoever set my system up put a “t” in the engines hot coolant line before the engines heat exchanger an

Re: Stus-List [EXTERNAL] Re: Loss of coolant

We have: Bilge from any point in the system including the water heater Exhaust via combustion chamber Exhaust via raw water from an internal heat exchanger leak Internal leak in the water heater (yuck!) A leak someplace in the manifold that dumps into either the intake or exhaust A leak someplace i

Re: Stus-List [EXTERNAL] Re: Need to replace forward hatch on 35 mkIII

I have to say my 47 year old AH hatches are hanging in there. I do put some Creeping Crack Cure around the screw heads every so often. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Mo

Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII

process. Enjoy the dry bilge Marek 1994 C270 #122 "Legato" Ottawa, ON From: CnC-List On Behalf Of Jeffrey A. Laman via CnC-List Sent: 15 April, 2020 17:16 To: David Risch ; cnc-list@cnc-list.com Cc: Jeffrey A. Laman Subject: Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkII

Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII

f the best improvements I made to the boat. Do it! Jeff Laman 1981 C&C34 "Harmony" Ludington, MI Check alignment of the shaft very carefully. From: David Risch Sent: Wednesday, April 15, 2020 4:17 PM To: cnc-list@cnc-list.com Subject: Re: Stus-

Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII

t; Barba, Joe via CnC-List > *Sent:* Wednesday, April 15, 2020 10:38:09 AM > *To:* cnc-list@cnc-list.com > *Cc:* Della Barba, Joe > *Subject:* Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII > > I have one and I like it, but given modern Teflon packing materials you > mi

Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII

-list.com Cc: Della Barba, Joe Subject: Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII I have one and I like it, but given modern Teflon packing materials you might want to look at that as well. The dripless seals can have nasty failure modes. Joe Della Barba Coquina C&C 35

Re: Stus-List [EXTERNAL] Dripless shaft seal for 35 mkIII

I have one and I like it, but given modern Teflon packing materials you might want to look at that as well. The dripless seals can have nasty failure modes. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]

Re: Stus-List [EXTERNAL] Re: Painted/Awlgrip Hulls

) To: cnc-list@cnc-list.com Cc: "Della Barba, Joe" Subject: Re: Stus-List [EXTERNAL]   Re:  Painted/Awlgrip Hulls Wow – I don’t think I have got an estimate around here under 12-15K for a 35 foot boat. That would be worth going to NC to get done!     Joe Della Barba Coquina C&

Re: Stus-List [EXTERNAL] Re: Painted/Awlgrip Hulls

First, knowing me and my somewhat casual approach to docking, I eschewed AwlGrip and choose AwlCraft 2000 instead. It is more easily repairable. Second, I managed to get Touche' professionally painted for about $4400 in 2011 by doing most the sanding and prep myself. I lightly sanded, degreased

Re: Stus-List [EXTERNAL] Re: Painted/Awlgrip Hulls

Talisman our 36 redone and would use Alexseal. David-I am in Mystic, who did you boat? Thanks! John McCrea Talisman 1979 C&C 36 Mystic, CT From: David Knecht Sent: Thursday, March 12, 2020 4:28 PM To: CnC discussion list CnC Subject: Re: Stus-List [EXTERNAL] Re: Pai

Re: Stus-List [EXTERNAL] Re: Painted/Awlgrip Hulls

Ditto here. Just had it done and all estimates were in Joe’s range. Dave S/V Aries 1990 C&C 34+ New London, CT > On Mar 12, 2020, at 3:17 PM, Della Barba, Joe via CnC-List > wrote: > > Wow – I don’t think I have got an estimate around here under 12-15K for a 35 > foot boat. That would be

Re: Stus-List [EXTERNAL] Re: Painted/Awlgrip Hulls

Wow – I don’t think I have got an estimate around here under 12-15K for a 35 foot boat. That would be worth going to NC to get done! Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Thursd

Re: Stus-List [EXTERNAL] Re: wire-to-rope vs rope

Let me add this; in that about half the season the boat is cruised with the roller-furl 135.  About every other weekend the boat is raced using the twin foil so the halyards are constantly running over masthead sheaves for sail changes (genoa to spinnaker to genoa or upsizing/downsizing the gen

Re: Stus-List [EXTERNAL] Re: wire-to-rope vs rope

Joe, About five years ago a bird decided to build a nest in my mast when it was down for winter storage.  The only problem I had (besides about 1/2 bushel of straw/twigs dropping out) was that the lines made good nest lining causing me to replace all internal halyards except the main.  Did no

Re: Stus-List [EXTERNAL] Re: wire-to-rope vs rope

How quick would it eat the halyard? Maybe try a month and check? Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Wednesday, March 11, 2020 11:34 AM To: cnc-list@cnc-list.com Cc: Gary Ny

Re: Stus-List [EXTERNAL] New thought re: anchor light?

I have one of these old GUEST hoistable lights.It is off the deck and still visible at a level most boaters are able to see. http://ariel-cd36.org/wordpress/?tag=led-bulb Miel Brannon Virginia Lee 93295 C&C 36 CB Virginia Beach, VA > On Feb

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Use DOT conspicuity tape. Your boat will look like a semi truck at night. :) Dennis C. Touché Sent from my iPhone > On Feb 5, 2020, at 1:54 PM, bwhitmore via CnC-List > wrote: > > Great idea, and very attractive! > > The only question is, my cove stripe is red. So does that mean I'd ha

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Great idea, and very attractive!The only question is, my cove stripe is red.  So does that mean I'd have to make it green on the port side?  :)Bruce 1994 C&C37/40"Astralis"Sent from Samsung tablet. null___ Thanks everyone for supporting this list with

Re: Stus-List [EXTERNAL] New thought re: anchor light?

I put a couple pictures on FB. Bill From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ken Heaton via CnC-List Sent: Wednesday, February 05, 2020 1:27 PM To: cnc-list Cc: Ken Heaton Subject: Re: Stus-List [EXTERNAL] New thought re: anchor light? My white cove stripe

Re: Stus-List [EXTERNAL] New thought re: anchor light?

*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *bwhitmore > via CnC-List > *Sent:* Tuesday, February 04, 2020 9:39 PM > *To:* cnc-list@cnc-list.com > *Cc:* bwhitmore > *Subject:* Re: Stus-List [EXTERNAL] New thought re: anchor light? > > > > Rick, I

Re: Stus-List [EXTERNAL] New thought re: anchor light?

-list.com] On Behalf Of bwhitmore via CnC-List Sent: Tuesday, February 04, 2020 9:39 PM To: cnc-list@cnc-list.com Cc: bwhitmore Subject: Re: Stus-List [EXTERNAL] New thought re: anchor light? Rick, I love the idea of the SOLAS tape! Thanks everyone for a lot of great insights and ideas. I'm

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Rick, I love the idea of the SOLAS tape!Thanks everyone for a lot of great insights and ideas.  I'm going to mull it around for q bit before making a final decision.Sent from my Verizon, Samsung Galaxy smartphone null___ Thanks everyone for supporting

Re: Stus-List [EXTERNAL] New thought re: anchor light?

[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Tuesday, February 4, 2020 3:56 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List [EXTERNAL] New thought re: anchor light? Neil, Are you referring to 2 lights as anchor lights? I believe the answer is

Re: Stus-List [EXTERNAL] New thought re: anchor light?

;> >> Neil Andersen 1982 C&C 32, FoxFire >> >> Rock Hall, MD >> >> >> >> *From:* CnC-List *On Behalf Of *Dennis >> C. via CnC-List >> *Sent:* Tuesday, February 4, 2020 11:29 AM >> *To:* CnClist >> *Cc:* Dennis C. >&

Re: Stus-List [EXTERNAL] New thought re: anchor light?

per the COLREGs? > > > > Neil Andersen 1982 C&C 32, FoxFire > > Rock Hall, MD > > > > *From:* CnC-List *On Behalf Of *Dennis C. > via CnC-List > *Sent:* Tuesday, February 4, 2020 11:29 AM > *To:* CnClist > *Cc:* Dennis C. > *Subject:* Re: Stus-Li

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Are the two lights appropriate for anchoring per the COLREGs? Neil Andersen 1982 C&C 32, FoxFire Rock Hall, MD From: CnC-List On Behalf Of Dennis C. via CnC-List Sent: Tuesday, February 4, 2020 11:29 AM To: CnClist Cc: Dennis C. Subject: Re: Stus-List [EXTERNAL] New thought re: an

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Aside from Joe's comment on bugs, I see value in a "deck level" anchor light. I have one similar to this: https://www.amazon.com/Pactrade-Marine-Navigation-Anchor-Splashproof/dp/B01KY4477I I plug it into a 12 vdc receptacle at the helm station and hang it from the boom. I also show the one at t

Re: Stus-List [EXTERNAL] New thought re: anchor light?

Ahh... Good point.  That had gone through my mind, but evidently didn't stick very long...  :) Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net On Tuesday, February 4, 2020, 10:58:56 AM EST, Della Barba, Joe via CnC-List wrote: I tried that for the reason you state a

Re: Stus-List [EXTERNAL] New thought re: anchor light?

I tried that for the reason you state and every bug in the creek showed up at deck level ☹ Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce Whitmore via CnC-List Sent: Tuesday, February 04, 2020 10:50 AM To: CNC

Re: Stus-List [EXTERNAL] Battery Amp Hours?

http://www.westmountainradio.com/product_info.php?products_id=cba4 Josh On Mon, Jan 27, 2020, 4:26 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > You would need some very accurate meters to do your own testing to the > amp-hour. I cannot see doing this on a NEW battery just t

Re: Stus-List [EXTERNAL] Battery Amp Hours?

We used to call that QC (quality control) in a match factory (that one worked, that one worked, that one worked, ...) Neil Schiller 1983 C&C 35-3, #028, "Grace" Whitehall, Michigan WLYC On 1/27/2020 5:25 PM, Della Barba, Joe via CnC-List wrote: You would need some very accurate meters to do y

Re: Stus-List [EXTERNAL] Battery Amp Hours?

You would need some very accurate meters to do your own testing to the amp-hour. I cannot see doing this on a NEW battery just to prove it really works. If you get a decent AH meter you can come fairly close, but it won’t be cheap. Joe Della Barba Coquina From: CnC-List On Behalf Of Edd Schi

Re: Stus-List [EXTERNAL] Re: Condensation

t; fall and immediately plug both openings. > > > > Bill Coleman > > Erie PA > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh > Muckley via CnC-List > *Sent:* Wednesday, January 22, 2020 6:21 PM > *To:* C&C List

Re: Stus-List [EXTERNAL] Re: Condensation

Good Point. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joe Della Barba via CnC-List Sent: Wednesday, January 22, 2020 6:40 PM To: cnc-list@cnc-list.com Cc: Joe Della Barba Subject: Re: Stus-List [EXTERNAL] Re: Condensation If the engine runs n fogging oil, it is

Re: Stus-List [EXTERNAL] Re: Condensation

next fall and immediately plug both openings. Bill Coleman Erie PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Wednesday, January 22, 2020 6:21 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List [EXTERNAL] Re: Condensa

Re: Stus-List [EXTERNAL] Re: Condensation

If the engine runs n fogging oil, it is not fogging anything, it is getting burned. Sent from my iPhone > On Jan 22, 2020, at 18:22, Josh Muckley via CnC-List > wrote: > >  > I've heard numerous people suggest that the engine "could" ignite on fogging > oil. I have not been able to find a

Re: Stus-List [EXTERNAL] Re: Condensation

I've heard numerous people suggest that the engine "could" ignite on fogging oil. I have not been able to find a substantiating source for this concern. In my particular case I used Amsoil synthetic fogging oil which may have a higher flash point than others. Besides, what if the engine did star

Re: Stus-List [EXTERNAL] Re: Condensation

I forgot this thread was initially about engine condensation. For a gas engine, I would fog it for sure, we always did with inboard or outboards. With a diesel, turning it over occasionally should be more than sufficient. If you do want to fog your diesel, do NOT use the starter, as it may ignite t

Re: Stus-List [EXTERNAL] Re: Condensation

Diesel engines CAN be fogged. Yanmars are a little frustrating though since they don't have glow plugs (like spark plugs) to remove for fogging. Mine was a real turd to get started the following season and I opt for rolling the engine as often as possible through the winter months. Josh Muckley S

Re: Stus-List [EXTERNAL] Re: Condensation

I have never had an issue with my engine from sitting during the winter, but I do very generously treat it with fogging oil. I am not sure about a diesel though, it might use the fogging oil for fuel ☹ Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-bou

Re: Stus-List [EXTERNAL] Re: Mechanical shaft seal options

Here is an interesting seal: http://www.duramaxmarine.com/shaft-seal.htm Click on the PDF at the bottom of the page for detailed info. The device has two discs like on the PSS, but uses a mechanical spring to maintain pressure between the two.

Re: Stus-List [EXTERNAL] Changing seacock values

Most thru-hulls have little tabs inside so the right-size screwdriver or bar stock will keep them from rotating IIRC. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Morris via CnC-List Sent: Tuesday, December 1

Re: Stus-List [EXTERNAL] Re: Mechanical shaft seal options

Do NOT use the Tides Marine seal. Huge PITA if it leaks. I have the PYI carbon face seal, but I would be tempted to use a traditional stuffing box with Teflon tape if I could. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Beh

Re: Stus-List [EXTERNAL] Re: C&C Crusader 40

ater Phantom -Original Message- From: Dave Godwin via CnC-List To: C&C List Cc: Dave Godwin Sent: Mon, Dec 9, 2019 2:32 pm Subject: Re: Stus-List [EXTERNAL] Re: C&C Crusader 40 Hmmm, yes, context would help Joe. No. Horta, Azores to Portsmouth, UK. After putting up with the un

Re: Stus-List [EXTERNAL] Re: C&C Crusader 40

Hmmm, yes, context would help Joe. No. Horta, Azores to Portsmouth, UK. After putting up with the unpleasantness of the final five days we pulled into Falmouth to rest and clear Customs. First leg was 1,342 NM and second leg to Portsmouth was another 160. On an Oyster 495. Solid. And dry… :-)

Re: Stus-List [EXTERNAL] Re: C&C Crusader 40

You sailed from Reedville to England in 10 days or did I read that wrong? Joe Della Barba Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave Godwin via CnC-List Sent: Monday, December 09, 2019 12:36 PM To: Richard N. Bush Cc: Dave Godwin ; C&C List Subject: [EXTERN

Re: Stus-List [EXTERNAL] Re: delrin washer

That is where I got mine. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Wednesday, November 20, 2019 9:15 PM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: [EXTERNAL] Re: Stus-List delrin washer Maritime Plastics in Annapolis

Re: Stus-List [EXTERNAL] Re: Boat insurance...reimbursement vs. depreciated

Made it in by THAT much! Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce Whitmore via CnC-List Sent: Wednesday, November 13, 2019 9:16 PM To: Della Barba, Joe via CnC-List Cc: Bruce Whitmore Subject: [EXTERNAL] Re: Stus-List Boat insurance...reimbursement vs

Re: Stus-List [EXTERNAL] Re: Compass

The Three Laws of Thermodynamics: 1. You can't win 2. You can't break even 3. You have to play From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dreuge via CnC-List Sent: Monday, November 04, 2019 11:13 AM To: cnc-list@cnc-list.com Cc: Dreuge Subject: [EXTERNAL

Re: Stus-List [EXTERNAL] Re: Starting An Engine with Battery Charger Connected?

Not surprised. I *was* surprised by the difference in price. I say go with the one that is cheaper. Josh On Thu, Oct 31, 2019, 1:30 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > True – they are the same thing. > > Joe > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-l

Re: Stus-List [EXTERNAL] Re: Starting An Engine with Battery Charger Connected?

True – they are the same thing. Joe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Thursday, October 31, 2019 12:53 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: [EXTERNAL] Re: Stus-List Starting An Engine with Battery Charger Connected?

Re: Stus-List [EXTERNAL] Re: Starting An Engine with Battery Charger Connected?

Have to admit that I did it once with our Redwing 35 (C&C 35-1) in South Haven, Michigan.  Something interrupted our normal departure routine.  Pulled the wires out of the boat end.  Came back to the dock and the cable was in the water and still live!  Can't believe it didn't fault the breaker.

Re: Stus-List [EXTERNAL] Re: Starting An Engine with Battery Charger Connected?

My father did that once! Joe Della Barba Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Wednesday, October 30, 2019 11:28 AM To: 'cnc-list@cnc-list.com' Cc: Hoyt, Mike Subject: [EXTERNAL] Re: Stus-List Starting An Engine with Battery

Re: Stus-List [EXTERNAL] Re: Engine cut out in rough seas

YES!! The primary will catch WATER and dirt and so on and you can drain the water and change the much larger filter. The secondary filter on the engine is an emergency backstop to prevent engine damage. It will clog fast if used as a primary. Note that biocide is good to keep al

Re: Stus-List [EXTERNAL] Re: Fwd: 3 blade prop question

If you have a diesel, limiting the revs with prop pitch instead of the governor will damage it sooner or later. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Shawn Wright via CnC-List Sent: Monday, October 21, 2019 11:24 AM To: cnc-list@cnc-list.com Cc: Shawn Wri

Re: Stus-List [EXTERNAL] Rendezvous

I almost beat my wife home and she drove! I was about at Kent Narrows before she got onto the island by car. Traffic was terrible Sunday. Good move getting a room, Pennsylvania is probably the world capitol of dee and car collisions. As someone who lives on an island and gets stuck in traffic al

Re: Stus-List [EXTERNAL] Re: Potable water conservation

I put a wire tie around the sprayer handle. I slide it p to lock it on and use the sink like a normal sink and slide it back to use the handle to control it. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Boyer

Re: Stus-List [EXTERNAL] Re: 19th of October Saint Michaels Maryland C&C Rendezvous

Joel, Glad to hear you will attend. Look forward to seeing you there. Hope to hear more about your races to Bermuda. Chuck Scheaffer, Resolute, 1990 C&C 34R > On September 19, 2019 at 4:01 PM Joel Aronson via CnC-List > wrote: > > Atlantis will be crashing the party! I better get to

Re: Stus-List [EXTERNAL] Re: 19th of October Saint Michaels Maryland C&C Rendezvous

nson [mailto:joel.aron...@gmail.com] Sent: Thursday, September 19, 2019 4:01 PM To: cnc-list@cnc-list.com Cc: Brian Fry ; Della Barba, Joe ; Josh Muckley ; rick bushie Subject: Re: Stus-List [EXTERNAL] Re: 19th of October Saint Michaels Maryland C&C Rendezvous Atlantis will be crashing the party! I be

Re: Stus-List [EXTERNAL] Re: 19th of October Saint Michaels Maryland C&C Rendezvous

Atlantis will be crashing the party! I better get to work on the varnish. I’m a member of the museum if that helps. Joel On Tue, Sep 17, 2019 at 8:03 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Do we get 4 people or 4 boats per member? > > > > *Joe Della Barba* > > Coqui

Re: Stus-List [EXTERNAL] Re: 19th of October Saint Michaels Maryland C&C Rendezvous

Do we get 4 people or 4 boats per member? Joe Della Barba Coquina From: Josh Muckley [mailto:muckl...@gmail.com] Sent: Monday, September 16, 2019 5:18 PM To: C&C List Cc: rick bushie ; Gary Nylander ; Brian Fry ; Della Barba, Joe Subject: [EXTERNAL] Re: Stus-List 19th of October Saint Michae

Re: Stus-List [EXTERNAL] Re: Digital fuel gauge...

A “digital” gauge attached to the same old sender will not be any more accurate. I have used plenty of flowmeters that actually count fuel used and absolutely love them. One airplane I used to fly had it connected to the GPS and it would set off an alarm if you didn’t have enough fuel to reach t

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

st > mailto:cnc-list-boun...@cnc-list.com > On Behalf Of Josh Muckley via > > CnC-List > > Sent: Monday, August 19, 2019 12:56 PM > > To: C&C List mailto:cnc-list@cnc-list.com > > > Cc: Josh Muckley mailto:muckl...@gmail.com > > >

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

be made for a group at one of the > restaurants. What has worked before? > > Gary > > > > *From:* CnC-List *On Behalf Of *Josh > Muckley via CnC-List > *Sent:* Monday, August 19, 2019 12:56 PM > *To:* C&C List > *Cc:* Josh Muckley > *Subject:* Re: Stus-Lis

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

9. > > Joe > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Nylander via CnC-List > *Sent:* Monday, August 19, 2019 1:05 PM > *To:* cnc-list@cnc-list.com > *Cc:* Gary Nylander > *Subject:* Re: Stus-List [EXTERNAL] Re: Any Mid-At

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

ne >> >> ---- Original message >> From: "Della Barba, Joe via CnC-List" >> Date: 8/19/19 11:45 AM (GMT-05:00) >> To: cnc-list@cnc-list.com >> Cc: "Della Barba, Joe" >> Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

To be clear, we are talking October 19. Joe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Monday, August 19, 2019 1:05 PM To: cnc-list@cnc-list.com Cc: Gary Nylander Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

. What has worked before? Gary From: CnC-List On Behalf Of Josh Muckley via CnC-List Sent: Monday, August 19, 2019 12:56 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned I got word from Higgins they should be able to accommo

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

dvice > Jim Schwartz > > > > Sent from my Verizon, Samsung Galaxy smartphone > > Original message > From: "Della Barba, Joe via CnC-List" > Date: 8/19/19 11:45 AM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: "Della Barba, Joe" &

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

Will take your adviceJim Schwartz Sent from my Verizon, Samsung Galaxy smartphone Original message From: "Della Barba, Joe via CnC-List" Date: 8/19/19 11:45 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: "Della Barba, Joe" Subject: Re: Stus-List [E

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

I would reserve a room now. St Mikes is a popular place to go and you want to be in town. Joe Coquina From: detroito91 [mailto:detroit...@aol.com] Sent: Friday, August 16, 2019 9:15 PM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

, Joe" Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned I would rather anchor out than go to MRYC. I know a lot of us will be wanting to walk around the town. I might suggest seeing about an “event” at CBMM. Those who are anchored out could still use the showers ma

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

st > Sent: Tuesday, August 13, 2019 4:45 PM > To: cnc-list@cnc-list.com > Cc: Della Barba, Joe > Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned > > I don’t think we have a final location. The Maritime Museum is fun. The > Harbor Inn on the other side

Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned

breakfast ☺ Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Tuesday, August 13, 2019 7:50 PM To: cnc-list@cnc-list.com Cc: Gary Nylander Subject: Re: Stus-List [EXTERNAL] Re: Any Mid-Atlantic rendezvous planned As my boat is berthed

  1   2   3   4   5   6   >