The streams seem very unreliable. Troubles connecting, drop-outs,
interruptions. Often one stream works OK, but repeated attempts to
connect to another doesn't work for an hour.
--
strindberg
strindberg's Profile:
Did stream without any problem last night. The sound compared to wma
96kbs is richer with more bass.
It think it's a bit louder than the wma stream.
Please don't destroy the sound quality by ading to much loudness like
Radio Venus has done. I get tired of listening to Radio Venus after 15
min
sharpnine;535943 Wrote:
I found this started happening after upgrading to 7.5, which immediately
required my SB3 to have a firmware update. When I went back to 7.4.2,
the other problem (apple lossless crashes) went away, but the
Pandora/radio problem continued. I have noticed that my
bernt;535961 Wrote:
Please don't destroy the sound quality by ading to much loudness
Agreed. The first casualty of the 'Loudness war'
(http://en.wikipedia.org/wiki/Loudness war) is the sound. The second
casualty is our ears.
--
Soulkeeper
Adam;535920 Wrote:
I'm wondering if what I am experiencing is the update nag or some type
of malware.
I'm on OS X (snow leopard), and every day when I get home, something is
prompting me to open the 32 bit version of the systems preferences for
Squeeze center. But when I do get to the
I bought this last night for my new HTC Desire. Looks and works great,
except for one fault: It does not seem to recognize Erland's various
browse plugins, Custom Browse, Dynamic Playlists and so on. I have
installed a few of those in my My Music menu, for quick access to its
great features.
This is great!!
Run like clockwork and i am using my Android phone to control both the
SB and Spotify!!
/Anders
--
bappe
bappe's Profile: http://forums.slimdevices.com/member.php?userid=37596
View this thread:
michael123;535743 Wrote:
Just downmix with Sox, pass '-c2'
Code:
# FLAC output starts here
flc flc * *
# FT:{START=--skip=%t}U:{END=--until=%v}D:{RESAMPLE=-r %d}
[flac] -dcs $START$ $END$ -- $FILE$ | [sox] -v0.995 --buffer 32768 -q
-t
Hey all,
I've had a slimp3 since sometime in 2003, running some late 4.x server
and updating regularly to my current 7.5 install on linux. I've been
keeping my eyes open for quite a while, thinking about when to upgrade.
I've been considering the boom, the radio, the touch for a bit, but I
hold
If you really do want to play 5.1 FLACs, then the Dune players are the
only devices I've seen that provide native MC FLAC support. You would
need a processor/amp with HDMI input of course.
http://dune-hd.com/hd_players/111-dune-bd-prime-3.0.html
MS
--
MadScientist
Just add the content above as-is to custom-convert.conf (in
server/plugins directory), modifying r96000 by r44100.
I think it shall work
--
michael123
michael123's Profile:
herbman;536092 Wrote:
I know back in the day (slimp3, sb1(no g, g), etc.) that many people
would have issues with the server responses, etc.. but as an
experienced user/sysadmin-type I could always work with whatever. With
the motion towards the player-side thicker logic, it seems that the
herbman wrote:
I know back in the day (slimp3, sb1(no g, g), etc.) that many people
would have issues with the server responses, etc.. but as an
experienced user/sysadmin-type I could always work with whatever. With
the motion towards the player-side thicker logic, it seems that the
general
I guess my primary concern is that I seem to get some willies about
depending on a squeezeplay device, since everything seems so shaky
right now. I know with the boom i'd get my reliable and familiar
experience, but the newer features of the GUIs tempt.
I think if I had to make a purchase right
flattermann is working on it, I'm sure :)
--
pippin
---
see iPeng, the Squeezebox iPhone remote, at penguinlovesmusic.com
pippin's Profile: http://forums.slimdevices.com/member.php?userid=13777
View this thread:
I have a couple of Booms, a Radio, a Receiver and a Controller. I don't
find my Radio to be any less stable/reliable than the others. However I
don't use the alarm or a direct connection mysqueezebox.com, which seems
to be where most of the pain occurs.
--
andynormancx
Yes, it will. Yes, all
Radio was very shaky when it came out and so was the 7.4 server
release.
To me, 7.5 looks much more stable and I've been using the Touch for a
long time now without experiencing any serious issues for some months.
Radio is still a little bit less stable but the unit I mainly use is a
beta one
herbman;536113 Wrote:
I guess my primary concern is that I seem to get some willies about
depending on a squeezeplay device, since everything seems so shaky
right now. I know with the boom i'd get my reliable and familiar
experience, but the newer features of the GUIs tempt.
I get the
My computer(s) are nowhere near my CAV6.6
Is there any other way to connect the computer that is running the VSPE
to the CAV6.6 besides that RS-232 serial cable? Is there some sort of
way to connect via ethernet?
My home is LAN wired down to where the CAV6.6 is located in the
basement closet.
Goodsounds;536131 Wrote:
I get the willies thinking about having to listen to music through a
device that arguably was obsoleted 5 years ago.
For many people, the relevant quality factor is sound quality. While
you've been waiting on the sidelines, many increasingly capable and
excellent
herbman;536135 Wrote:
I'm detecting a small note of hostility in some of these responses. I'm
really just asking some questions and expressing some concerns; there's
no need to jump on me for it. I was an early supporter and will likely
be a future supporter, I'm just trying to get a grasp
michael123;536096 Wrote:
Just add the content above as-is to custom-convert.conf (in
server/plugins directory), modifying r96000 by r44100.
I think it shall work
thanks for your reply
I see this in: convert.conf(/etc/squeezeboxserver)
my plugins directory looked empty I didn't see a
michael123;536096 Wrote:
Just add the content above as-is to custom-convert.conf (in
server/plugins directory), modifying r96000 by r44100.
I think it shall work
thanks for your reply
I see this in: convert.conf(/etc/squeezeboxserver)
my plugins directory looked empty I didn't see a
Come on in the water is fine!
I've never used a slimp3, but I'm still using my original SB1 along
with a couple of SB3's and 3 Radios. A Touch is on the way. I've had
very little serious trouble with any of them. I'm very picky about
household technology, if it requires too much futzing or my
Sully,
Yes, there is a way to do this. I recently learned that there are
IP-to-serial devices that can effectively replace what VSPE does. Two
such products are the Elk IP232 and the Startech NETRS2321E. You
should find these for around $130 to $140. In the SqzRuss.ini file you
just replace
pippin;536124 Wrote:
The only real glitch I'm still seeing in all SqueezePlay devices is one
related to having more than one server in the network all of which use
authentication when switching devices between them. If you don't have
such a setup, this probably doesn't apply to you if
yes, it is not there.
You need to create it.
--
michael123
michael123's Profile: http://forums.slimdevices.com/member.php?userid=23745
View this thread: http://forums.slimdevices.com/showthread.php?t=77395
That's a bit steep, though your quick reply is much appreciated.
Do you think -any- ethernet to serial bridge would work? I saw one for
$35 here:
http://www.blackbox.com/Store/Detail.aspx/LA126?CAWELAID=415403267
but I don't know anything about these things.--
--
sully1971
No hostility intended. Snarly's response captures my thoughts.
You realize that the device you are holding with a death grip is little
more than a proof-of-concept prototype that was developed by a seat of
the pants, under-financed start-up. The DACs and other components have
in stages been
Sully,
That product looks like a simple cable pin-out adapter. It's possible
you could put one of those at each end of the cat 5 cable to make it
essentially a long serial cable (if the cat5 cable is not too long to
carry the signal). You would *not* connect the cat5 cable to your
network and
Hi all,
My 2 year old SQ Classic has a problem with the screen. A horizontal
strip about about 1cm high will not display any pixels at the centre of
the screen, across the width of the screen. This is temporarily
resolved by removing the power, waiting, and re-connecting, but it
always
Hi all,
I'm trying to wake up my PC using an other remote and its appropriate
.IR file, setting the power fonction to the power toggle button of
this remote
The original SB remote works fine of course and wakes up correctly my
PC, but not able to do it with this other.
I think that .IR files
Hi all,
I'm trying to wake up my PC using an other remote and its appropriate
.IR file, setting the power fonction to the power toggle button of
this remote
The original SB remote works fine of course and wakes up correctly my
PC, but not able to do it with this other.
I think that .IR files
I have a Duet. I find the Receiver to be flawless. The Controller is not
quite as stable (no surprise, as it's much more complex), but it's
usable, and it's a fun nerdy gizmo. The Duet in effect gives me two
players in one... or two, YMMV.
Today I just bought myself a 3 months old secondhand
Does the Power button as such work with the other remote, i.e. turn the
SB on or off when the server is already running?
--
usch
usch's Profile: http://forums.slimdevices.com/member.php?userid=33389
View this thread:
yes, when server is running, this remote acts like the original, power
toggle on/off
--
rodymary
rodymary's Profile: http://forums.slimdevices.com/member.php?userid=1887
View this thread:
DigitalMitch;536164 Wrote:
is this just a switching issue or could it destabilise the STS into
rebuffering, stalling andother music performance issues?
No, this only affects moving players between servers with a SqueezePlay
user interface. The bug is in the user interface for the
Nope, not possible, because the .ir file you have edited is on your
server that is asleep. The only IR codes that can trigger WOL are the
one(s) hardcoded in the player firmware.
--
andyg
andyg's Profile:
andyg;536299 Wrote:
Nope, not possible, because the .ir file you have edited is on your
server that is asleep. The only IR codes that can trigger WOL are the
one(s) hardcoded in the player firmware.
that's what I was also thinking ! thanx
--
rodymary
SqueezePlay was introduced in the controller, so the majority of pain
was with that release.
It's now 2-3 years later and it is much better.
--
Mnyb
Main hifi: Touch + CIA PS +MeridianG68J and assorted amps SiriuS,
Trying the latest SqueezePlay nightly build (16. April) for Mac, but
have two problems/questions:
1) Audio is playing through the internal speakers no matter what (OS X
10.6.3 on a MBP), even if the Macs Sound preferences is set to go
through my USB sound card; any idea why?
2) Is it possible
SB3 and WinXP. Had the upgrade nag for a few weeks, finally relented on
Wed. SB3 hasn't worked since, Player Not Found.
I've checked diag in Control Panel, all seems ok. I've changed Security
in SBS Advanced\Network to address 198.127.1.* and I've rebooted
everything. I've checked the Ports,
I'm struggling a bit with presets and favorites in 7.5. I've got three
radios and one touch (another touch on the way). I like to access
presets from my remote control on the radio in the bedroom. Since
upgrading to 7.5 this isn't working. The hard buttons on the radio
work. In searching
I'm struggling a bit with presets and favorites in 7.5. I've got three
radios and one touch (another touch on the way). I like to access
presets from my remote control on the radio in the bedroom. Since
upgrading to 7.5 this isn't working. The hard buttons on the radio
work. In searching
ralphy;526693 Wrote:
Things have finally stabilized in the portaudio dev tree for wasapi at
r1483.
I've been working on adding WASAPI support to squeezeslave.
I'm currently having issues when attempting to open the audio device.
I finally have a working WASAPI squeezeslave binary.
It
SilverRS8;535949 Wrote:
Can you:
1. post the contents of your my.tt or my.cfg file
2. Post the path where the file is located and the filename (my.tt or
my.cfg)
/usr/share/squeezeboxserver/MySQL/my.tt
# $Id$
#
# Squeezebox Server specific MySQL Server config.
[mysqld]
innodb
Oppala;536345 Wrote:
SB3 and WinXP. Had the upgrade nag for a few weeks, finally relented on
Wed. SB3 hasn't worked since, Player Not Found.
I've checked diag in Control Panel, all seems ok. I've changed Security
in SBS Advanced\Network to address 198.127.1.* and I've rebooted
everything.
Oppala;536345 Wrote:
I've checked the Ports, these seem to be ok
...
Thoughts anyone please?
Firewall software configured to allow connections to specific EXEs, and
the new EXE having a different path or checksum?
--
peterw
http://www.tux.org/~peterw/
Free plugins: 'AllQuiet'
Oppala;536345 Wrote:
SB3 and WinXP. Had the upgrade nag for a few weeks, finally relented on
Wed. SB3 hasn't worked since, Player Not Found.
I've checked diag in Control Panel, all seems ok. I've changed Security
in SBS Advanced\Network to address 198.127.1.* and I've rebooted
everything.
49 matches
Mail list logo
