en when you change
frequencies to where you moved the birdie you would have to move it back?
73HankK8DD
---
--
View this message in context:
http://n2.nabble.com/K3%3A-Firmware-3.03-introducing-artifacts--tp2521788p2521948.html
Sent from the Elecraft mailing list archive at Nabble.com.
really think if I had purchased a K3 with no roofing filters, like I've
seen suggested, I would have most likely sold the K3 and gone back to a K2!
Just my thoughts.
73HankK8DD
--
View this message in context:
http://n2.nabble.com/Filter-Selection-Approach-tp2630347p2636834.html
Sent fro
W0UHF won the K3/10 at the QRP-ARCI Awards Banquet.
He did not attend the banquet, but made record time to come
to the Holiday Inn and pick it up!
72 73HankK8DD
who won the K3 at FDIM Saturday night?
Al ve3gam
--
View this message in context:
http://n2.nabble.com/winner-of-K3
them - don't tell anyone where they came
from, but tell me what you didn't like!
72 73 HankK8DD/5 Plano TX for the Hamcom Hamfest
Niel Skousen-2 wrote:
>
> Sometime back (before I got sn 1396) there was a discussion of sharing
> configuration files. Thus a n
riday & Saturday, so you really don't need a car!
72 73HankK8DD
--
---
rm -r *
---
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:
And if you work K8EPV on CW in Field Day it will be a K3 on 40M and a pair of
K2's on the 80/20 station. That's what we did last year, and it worked well
enough that we're doing it again!
73 HankK8DD
W5CEM wrote:
>
> Early post, but I leave tomorrow for our FD
tage, or if it is higher current to pick the relay, than
is specified in the K3 specs - use the ARB-704.
And, yes, you can use the ARB-704 with any amp, even though it may not
be needed.
73HankK8DD
GET FREE SMILEYS FOR YOUR I
James Sarte wrote:
> I ordered a set of machined concentric knobs from Mouser. You should check
> those out.
>
> James K2QI
>
That sounds like a good idea . What was the part number?
Thanks
HankK8DD
FREE ONLI
definitely
have a KDSP2. It really makes a difference on 160 and 80 CW!
72 73HankK8DD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mai
I agree. As long as you don't have to touch the buttons on the front
panel and let the logging software change your bands and modes - just
use the VFO, AF/RF Gain, Width and RIT knobs, it's an unbeatable radio.
And I didn't drink the Kool-Aid!
Thanks for the Q in NAQP.
73
John N1JM wrote:
>>
>>
>> As long as you don't have to touch the buttons on the front
>> panel and let the logging software change your bands and modes
>>
>>
>> 73HankK8DD
>>
>
>
> What did you mean by that?
>
James Sarte wrote:
> Well, to be honest there are still several features advertised that to this
> date still haven't been implemented. For example:
>
> 1. Synchronous AM detection
> 2. Temperature controlled oscillator calibration
>
> Those are just two features missing that I can recall of the
ey
first start the opposite is probably true.
73HankK8DD
GET FREE 5GB EMAIL - Check out spam free email with many cool features!
Visit http://www.inbox.com/ema
Well, in my case it took a few years - and then around 35 wpm or so the
receiving speed passed the sending speed.
73HankK8DD
Doug Person wrote:
> Not sure I agree. I can send 25 WPM with a decent straight key and
> 30-35 with a good iambic paddle. However, I can only comfo
that get made about mobile CW.
73 :^]
HankK8DD
Grant Youngman wrote:
> Hmmm .. I can't use my cell phone when driving through a school zone
> here, even with a hands-free. I wonder if I could get away with
> taking target practice at the little tykes walking to schoo
http://www.arraysolutions.com/Products/acom.htm
Doug Person wrote:
> Who sells the Acom 1010? Can't find any dealers with a google search.
> Sure looks nice.
>
> Doug -- K0DXV
>
> Rick Tavan N6XI wrote:
>> Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full
>> QSK. I th
is no safeguard on V>M . That is supposedly "on the list" to
have a double tap of the V>M before it writes to the memory location,
but there are too many other things ahead of it, I guess.
73HankK8DD
Merv Schweigert wrote:
> Color me stupid, but I have not come up with
Michael B wrote:
> I believe you mean, use the M>V and don't push V>M.
>
Yep, I did and I proofread it three times, too!
Should be:
> But . In the heat of switching back and forth you must be VERY
> careful to use the V>M button - do not miss and use the **M>V** button
> because you
e close to it! It is a very nice case
for traveling by car or to Field Day etc but not on an airplane.
This winter if I take the K3 again it will go carry on in a 1510 with
wheels.
73HankK8DD
__
Elecraft mailing list
Home: h
||
1N34\/ /\
| |
|_|
|
|
ground
73HankK8DD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
Now is the time to upgrade your old radio.
In an effort to further revive the weak economy, the government
announced that it started a new Cash for Radio Clunkers program on
August 3.
The program is aimed at members of the Amateur Radio Service, also known
as ham radio operators. Operators with
could actually hear
the memory frequency before you press M>V again to go to that frequency.
73 HankK8DD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq
27;s the list of 'little things' that we were accustomed to on a radio
that are somewhat frustrating when things don't work the way we expect
them to work!
73HankK8DD
__
Elecraft mailing list
Home: http
g - they said then that they did not know if they were going
to pursue a QRP radio. Looks like they may have decided!
73 Hank K8DD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
with some looking and searching you can find them
for around $150.
73HankK8DD
Paul Christensen wrote:
However being that you mention the K3 you'll want to either ensure you
use higher impedance headphones or ensure that you change the series
caps in the headphone circuit from 1
on/off. And the CW signals came up out
of the noise - or the noise went down. But . it doesn't work right
anymore with the newer MCU & FPF levels. That DSP is part of
k3fw2r10.zip which I have labeled "FD 08" in the folder with all the
old firmware sets.
73Ha
and it was almost as good as the K2/100 w/o the KDSP2. Wish
I'd have never sold the 746!
73 HankK8DD
N2TK wrote:
> I do see a reduction in audio when turning on the NR with SSB. As an
> example, I usually have the AF control around 9-9:30 position using an
> external speak
at least keep rate up. Make it F9-1 - NR for dummies like me!
73HankK8DD
David and Dianne on Comcast wrote:
> Hi Everyone,
>
> After reading literally dozens of postings on the 'problems' with NR in
> Beta 3.27, I have seen only 2 responses about NR in Beta 3.30 s
the QSO, almost broke the boom mike getting the headset
off, spilled beer on the keyboard (but I have a couple spares) and
couldn't hear for a few minutes.
Loaded my last beta.
73HankK8DD
FREE 3D MARINE AQUARIUM SCREENSAVER -
That's what I thought too - good upgrade . maybe it just has not
happened to you yet!
73 Hank K8DD
Hector Padron wrote:
> My upgrade to the latest FW 3.30 and DSP 2.26 was smooth and easy as all
> the other Beta ones and it works perfect,no distorsion,audio is
> p
John wrote:
> At 09:47 PM 06/09/09, you wrote:
>> spilled beer on the keyboard (but I have a couple spares)
>
> referring to beers I hope.
>
> k7up
>
Fortunately both.
73HankK8DD
Receive Notificati
,
and not use that MCU/DSP set. I know it has changed my thoughts on
trying the "latest & greatest" beta firmware!
73HankK8DD
K9ZTV wrote:
> The NR on SSB is spectacular in the latest version with no volume
> problems. By the way, the original poster says he has be
another Front Panel board. Besides, I don't think it can be fixed.
73HankK8DD
Paul Ferguson wrote:
> I own K3 #757 and recently noticed some of the front panel buttons were not
> working. They either did not work at all or gave strange results. I contacted
> support, and
AD6XY wrote:
>
> My K3 has sometimes had problems with switches too, but only rarely. My K2
> is much worse in this respect.
>
> Have we found any user applications for the connector on the bottom of the
> panel yet?
>
At least on the K2 with it's bouncing switches it is not only a known
pro
ttings - I guess
it has a lot to do with individual voices. And it seemed to me that the
screen on the microphone got rid of most of the breath sounds.
73HankK8DD
Ignacy wrote:
> I compared Yamaha CM500 to my other headset: Sony 32 Ohms headphones with
> Heil HC5 attached via piec
I forget what the voltage on the relay jack of the FL-2100, but the K2/100
will not key it.
You need either a relay buffer or an Ameritron ARB-704.
73HankK8DD
DaveVK wrote:
>
> Hi,
>
> Is the switching transistor on the KPA-100 suitable for the FL-2100Z? Or
> should
half dozen left.
73HankK8DD
The most frequently used push button switches (for me they are BAND+, BAND-,
MENU, MODE, XFIL, A/B, A=B) do go bad after a while. I own a pair of
K2/100's and I've had to replace all of the switches I've already mentioned
on each rig.
I'm
Like when
Band Down (or Up) goes down (or up) two bands and maybe turns on (or
off) the VOX sometimes - Not real steady.
Thanks for the hint!
73HankK8DD
--
View this message in context:
http://n2.nabble.com/K3-feeling-of-knobs-and-switches-tp1661699p1668483.html
Sent from
.k8dd. wrote:
>
> Maybe it's not me and the way I press the switches!
> Most of mine flash between two numbers when I hold the switch . I
> take it that this is not normal, and probably why it does strange things
> sometimes when I either tap or hold some of the swit
Hmmm . Strange
Support tells me it's normal for the readings to flicker/change numbers and
probably not
the cause of double band changes, etc.
ab2tc wrote:
>
> For the record, my readings are perfectly stable on one number even if I
> do my best to "tease" the but
YN - Nicaragua Feb 17 - 24 Hank, K8DD (YN2DD); Stan, AC8W (YN2WW);
Lee, N8LJ (YN2LJ) and Jim, KB8TXZ (YN2TX) will be active on all
bands/modes. In the ARRL DX CW contest using the call YN2DD. Check
QRZ.COM for QSL information.
That said . As I have done for the past trips to the DX side
73HankK8DD
--
"I knew that God put me on this earth to be on the radio."Ed Bradley
--
"Me too!"K8DD
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
ere's a lot more that I'd rather see on the K3.
73HankK8DD
G3XDY wrote:
>
> Like a few other VHF and up types I'm patiently waiting for the Auto CW
> capability on the K3, where it sends on CW if you press the key and on SSB
> if you use the Mic PTT, wi
K8DD
--
View this message in context:
http://www.nabble.com/K3-and-contest-logging-programs-tp17039832p17039832.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
are about the
only ones that work while transmitting.
I was very impressed with the receiver in WPX!
73HankK8DD
--
View this message in context:
http://www.nabble.com/K3s-in-WPX-CW-at-P40L-tp17489984p17526871.html
Sent from the Elecraft mailing l
ol.
But you would want a CW delay when sending from the paddle/keyer
Those would be some of my thoughts.
73 HankK8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with experience.' -anon
--
___
And then it would be nice to hear the memory when you press M>VFO as
you step through the memories.
73Hank K8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with experience.' -anon
--
Phil & Debbie Salas schrieb am 29 May 2008 um 1
over my humanity. If nobody asked for functionality or
reported issues, the K3 would not be where it is today.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
Hear, hear -- Well said, Ian.
HankK8DD
I'm not sure how many use Logger32, but when I am chasing
DX spots and change band and / or mode, the filters do not go
to the default settings. The same thing happens if I type in a
frequency. Logger32 knows, from the band plan, which mode
to use by the frequency.
If I go from, for example - 140
More information:
I just downloaded DX4WIN demo. It does the same thing -
K3 on 14.025, CW, 700 Hz.
Click on a spot for 28280. Radio goes to 28280, Mode
changes to SSB, but filter stays at 700 Hz.
- Original Message
From: hank k8dd <[EMAIL PROTECTED]>
To: Elecraft Reflector
I'm glad it wasn't me or any of the programs that I use.
Apparently the default I or II setups do not tie the filter with
the mode or it's just not using the default setup that you
have saved in the K3 when you use external control.
73 & Thanks
HankK8DD
--
&
How hot does your K3/100 PA run?
And how hot is safe?
I was sitting in a pileup at 90 watts and watching the PA Temp - it got up to
around 41 or 42 C (about 100 F) so I turned the fan up a notch or two and it
cooled right back down to around 20 C (70 F).
73HankK8DD
--
'Never
--- G4ILO <[EMAIL PROTECTED]> wrote:
>
>
> hank k8dd-3 wrote:
> >
> > I was sitting in a pileup at 90 watts and watching
> the PA Temp - it got up
> > to around 41 or 42 C (about 100 F) so I turned the
> fan up a notch or two
> > and it
If you click on a DX spot, or type in the frequency to change to another band
and / or mode and the filters do not switch to the default settings
And you are using Logger32 - Here is the answer to get SSB settings on SSB,
Data settings on Data and CW settings on CW sent to the K3!
In th
delays.
73HankK8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with experience.' -anon
--
- Original Message
From: wayne burdick <[EMAIL PROTECTED]>
To: Elecraft Reflector
Sent: Monday, June 9, 2008 12:34:23 PM
Subject: [Ele
use the noisy switching power supply that most
laptops use.
Have not tried PSK or RTTY yet, but see no reason why
they won't work.
Allthough the keyboard is a bit cramped, it is great for
portable operation . and quite inexpensive compared
to the bigger laptops.
72 73 Han
you cannot adjust it
until you hold the Auto Notch.
Seems to me it should be tap it to turn Auto Notch on, tap
it again to turn it off.
For Manual:
Hold Auto Notch to put it in Manual (and you can adjust it
with VFO knob). Tap it to turn Manual off.
73HankK8DD
--
'Never argue wi
cific time and Eastern time zones?!
73 HankK8DD
- Original Message -
From: "Mike Scott" <[EMAIL PROTECTED]>
To:
Sent: Friday, June 27, 2008 9:03 AM
Subject: [Elecraft] [K3] Clock time is off now with beta FW
I am using new beta FW v02.10 / v01.81
Time now is
ke to be able to back up the configuration, memories and
filter setup to the logging PC, a network drive, a CD or a USB memory.
Now that would be great!
73Hank K8DD
- Original Message -
From: "Dick Dievendorff" <[EMAIL PROTECTED]>
To: "'K2ZLS'
liWatt Field Day. Information on this can be found at
http://www.qrparci.org/content/view/6870/118/
72 73HankK8DD
Receive Notifications of Incoming Messages
Easily monitor multiple email accounts & access them with
really lame
compared to the Ham Radio software written for Windows.
72 73HankK8DD
- Original Message -
From: "Solosko, Robert B (Bob)" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, July 01, 2008 11:04 AM
Subject: [Elecraft] LINIX PCs and ham SW?
Hi Folks,
I'
newer one.
Good deal . for them!
73HankK8DD
.
- Original Message -
From: "Deni" <[EMAIL PROTECTED]>
To: "'Elecraft Reflector'"
Sent: Thursday, July 03, 2008 4:04 PM
Subject: [Elecraft] K3 Nifty Mini Manual
I've jus
Yeah, anyhow . there are other things that really need to be fixed
before cosmetic stuff like that!
- Original Message -
From: "PhilB" <[EMAIL PROTECTED]>
To:
Sent: Saturday, July 05, 2008 3:50 PM
Subject: Re: [Elecraft] Band button
Please Elecraft, leave the Band Button the w
0 Hz.
The effect, as Keith says, is very noticeable!
73HankK8DD
GET FREE SMILEYS FOR YOUR IM & EMAIL - Learn more at
http://www.inbox.com/smileys
Works with AIM®, MSN® Messenger, Yahoo!® Messenger, IC
he test to see if they can last over 5 hours.
If they do, I'll have a couple Heil Pro sets for sale.
73HankK8DD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber I
will revert to the previous mode and you have to use
NORM. At least with the current firmware!
73Hank K8DD
-Original Message-
From: Laurent FERRACCI
Hi friends,
I am posting this message to the Elecraft, microHAM and DXLab lists,
because all three are involved. Sorr
ice . About the same as DX nets .. but that's not a topic for
here! :^}
73HankK8DD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
TA.
Other than that the K3 using 500 Hz (both first IF crystal and second IF
DSP) was a real treat!
73HankK8DD
- Original Message -
From: "WA6L" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 20, 2008 10:37 AM
Subject: [Elecraft] K3: Low power in RTTY
I worked f
If you used #10 wire .
Check out the July 2008 CQ magazine, page 74, the Beginners Corner column.
There is a very good write-up on page 79 on how to do this.
I suppose you could use #12 wire if your current requirements were lower on
each leg.
73HankK8DD
- Original Message
- Original Message -
From: "Brett Howard" <[EMAIL PROTECTED]>
Actually it wasn't too long
ago that I was talking with Wayne when I'd had radio troubles and I'd
mentioned that I wished there was a way to erase memories. He mentioned
that he didn't understand why I'd want that when all I
real close . but the radio
sounds like crap. OK . that's a personal observation of what it sounds
like to me on 80 CW!
I'm not sure I understand everything I have read about SLP and THR! Nor do
I want to. I want a radio that sounds close to or better than the K2!
So there&
t this way.
There are a handful of things that seem strange that you have to get used
to on this radio!
73Hank K8DD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
From: <[EMAIL PROTECTED]>
The
only one I had trouble with was the WIDTH control. For some reason I
kept expecting the filter b/w to become narrower as I turned it
clockwise...
Same here. That's the only knob that I consistently turn the wrong way.
Agreed. I think it has to do witht he fac
Allow the PITCH to be changed without having to listen to the tone or
with the tone.
Allow the sidetone level to be changed without having to listen to it
or with the tone..
Allow the sidetone to be independently controlled (and be able to change
it while you are transmitting) or AF
card at a level
controlled by the AF Gain control (NOT Line Out level) and possibly
overdrive your sound card.
73 HankK8DD
- Original Message -
From: "Ed Steeble" <[EMAIL PROTECTED]>
I tried to use a K3 in the IOTA contest on SSB but ran into a problem.
I c
Yes it would!
- Original Message -
From: "Stewart Baker" <[EMAIL PROTECTED]>
It would be nice to have a LINE OUT setting something like =TX/RX
where both the received audio and the transmitted audio were
available at a preset (independent of volume control) level.
It would be very use
No . But I understand it's on the list after I shot myself in the foot
with it
on CW.But that's another story!
73 HankK8DD
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Friday, August 01, 2008 11:24 AM
Subject: [Elecraft] Receive Equaliza
n on NR
the received signal goes very soft. If I set NR = F1-1 through
F1-3 it isn't too bad.
73 HankK8DD
- Original Message -
From: "Vic Abell" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, August 05, 2008 7:18 PM
Subject: [Elecraft] K3: recommendations wanted
I got one a Sennheiser PC350 a couple of weeks ago. I think it's the best
of the
boom microphone/headsets. Definitely the most comfortable, and the headset
has a fair amount of passive noise reduction. I'd give them a 5 out of 5.
Also another happy camper here.
72 73 Ha
My RX EQ is (and has been for a month) flat - all zeros.
Firmware 2.19 because it sounds so much better on CW than 2.2x
AGC SLP = 2THR = 5 NR = F2-4
The K3 sounds real close to the way the K2 sounds.
HankK8DD
- Original Message -
From: "Mike Kasrich" <[EMAIL PR
nouncer Voice" so we can be all happy little campers.
Maybe they will. After all, they came up with one of the better paddles for
CW
with the Hexkey . I guess they could spend some time on the phone ops!
(tongue out of cheek)
73HankK8DD
__
s far as I know, no one uses the well discussed (and
sometimes over discussed!) use of ERP in QRP power levels.
72 73HankK8DD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscrib
The latest version of Ham Radio Deluxe will give you control
of most all the CONFIG menu functions . there are a couple
missing, but I don't think it would be a 'show stopper'.
73 HankK8DD
- Original Message -
From: "LB3SA" <[EMAIL PROTECTED]&g
I haven't noticed too much in the way of distortion.
But the leading edge of CW elements is decayed with NR on.
It seems to me that DSP 1.81 works much better with MCU 2.2x
73Hank K8DD
- Original Message -
From: "Julius Fazekas" <[EMAIL PROTECTED]>
To:
8 watt resistor.
So . is there anyone within 50 miles or so of Lapeer, MI who can change
these new diodes when I get them?And if you don't have a K3, this would be
a good chance to see one and try it out!
73HankK8DD
___
Elec
to copy weak stations on the air.
I have used Writelog and N1MM to test this. But if the laptop is
independent of the logging PC you could use Audacity - a free audio program.
73HankK8DD
- Original Message -
From: "Jeff Kinzli N6GQ" <[EMAIL PROTECTED]>
pends on which program you are using to record, how much
quality you want and how big your hard drive is!
73Hank K8DD
- Original Message -
From: "David Cutter" <[EMAIL PROTECTED]>
To: "Elecraft"
Cc: "Elecraft Reflector"
Sent: Satur
the K3 what to set the DSP filter to
for the given mode from the logging program band plan, so I don't know if
the band/mode default was ever fixed!
73HankK8DD
- Original Message -
From: "Larry P. Greenberg" <[EMAIL PROTECTED]>
To:
Sent: Monday, August
Measure twice, assemble once!
Magnetic screwdrivere is a good idea, too.
Receive Notifications of Incoming Messages
Easily monitor multiple email accounts & access them with a click.
Visit http://www.inbox.com/notifier and check it out
on.
73HankK8DD
Receive Notifications of Incoming Messages
Easily monitor multiple email accounts & access them with a click.
Visit http://www.inbox.com/notifier and check it out!
___
E
However .. 98% of the people I have heard say Elecraft pronounce it
Lcraft.
And 1% are undecided.
The other 1% are on the Elecraft reflectors.
73HankK8DD
Not silly at all - I am certain the folks at Elecraft want everyone to
get it right :-) .
It is pronounced "Ele" (an
W1REX may be joining us with some Tuna Tins.
Hope to see you all there or is it Hope to see y'all there!
72 73Hank K8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with experience.'-anon
-
rg and go to the link for
the Stitchin' in Dayton.
The details, information and room request form
are located: www.rooms.qrparci.org
FDIM & the QRP Awards Banquet: fdim.qrparci.org
73HankK8DD
--
QRP Hotel Rooms www.rooms.qrparci.org
FDIM May 15, 2008
n in "DX country" and
I am not trying to generate a pile-up, but I want to work 2XQRP -
unless it's a QRP
pile-up, that is!
72 73 and hope to work a lot of 2XQRP while we are down there.
HankK8DDPZ5DD
Please reply direct - I have the reflectors on postpone / no mail
while I
stitching and
shopping and shopping!
http://k8dd.com/rooms/2007st1ch_news.htm
and http://k8dd.com/rooms/ST1TCH2008.html
72 73 HankK8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with exp
A-100 shutdowns
since I put it in a couple of years ago. And there has
been no problem with the K3/100.
It is a simple fix to allow the K2/100 & K3/100 to work
with the slower 12VDC Ameritron amp relays . if you
need it.
73 HankK8DD
Roger
Go to this site http://www.k6xx.com/radio/fas
On Sat, Mar 22, 2008 at 6:10 AM, Brendan Minish <[EMAIL PROTECTED]> wrote:
>
> On Fri, 2008-03-21 at 18:33 -0700, hank k8dd wrote:
>
> > The problem with Elecraft rigs switching Ameritron amps
> > has existed with the K2/100 and, so it appears, now with
> > the
Darwin, Keith wrote:
>
>
> How long was it from Katie-gram to rig-in-hand for your K3?
>
> - Keith N1AS -
>
>
Three days from Katie-gram to a box being handed in the door
in Michigan by the USPS rural mail lady.
73HankK8DD
--
View this mess
dies had a great time stitching and
shopping and shopping!
http://k8dd.com/rooms/2007st1ch_news.htm
and http://k8dd.com/rooms/ST1TCH2008.html
72 73 HankK8DD
--
'Never argue with an idiot. They drag you down to their
level then beat you with exp
Mine works fine, people (unfortunately) tell me that
it sounds like me!
Set the mike for front panel and bias on.
73HankK8DD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subsc
1 - 100 of 211 matches
Mail list logo