doors 0-30C, means it needs an external reference. The GPS
receiver is a viable solution.
73, Barry N1EU
On Sat, Oct 28, 2017 at 11:49 PM, Brian Hunt
wrote:
> Google NMEATime. Haven't tried it myself but one of the local hams is,
> along with a USB GPS receiver.
>
&
e what
software you're successfully running under Windows to link the GPS data
with the system time?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
Thanks Tom and Don for the responses. I'll try a few 15sec FT8 xmit cycles
at 50% (7.5W) into a dummy load while monitoring PA temp. Any guidance on
what the upper safe limit is for PA temp?
Thanks & 73,
Barry N1EU
On Thu, Oct 26, 2017 at 8:34 AM, Don Wilhelm wrote:
> Barry,
&g
What is the recommended max power output setting for the KX2 and for the
KX3 for normal FT8 use without after-market heatsink?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Looking at some shack redecorating and one possibility is placing the P3
directly on top of the K3/100. Is that OK?
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net
Jim:
What size SVGA monitors do you use? I presume there is a tradeoff between real
estate being used by the monitors versus preferred viewing size for seeing what
the P3 can provide.
Thanks,
Barry Baines, WD4ASW
> On Sep 30, 2017, at 11:44 AM, Jim Brown wrote:
>
> On 9/30/201
asis for flexibility.
However, the maximum you can display, today, is around 190 kHz. And, you may
not be able to see deeply into the noise.
73,
Barry
K3NDM
Sent from XFINITY Connect Mobile App
-Original Message-
From: m.matthew.geo...@gmail.com
To: rlind...@mit.edu
Cc: Elecraft@mailma
have used handles this without breaking a sweat. Happy
DXing!
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: elecraft@mailman.qth.net
Sent: 9/18/2017 10:20:22 PM
Subject: Re: [Elecraft] Question for Wayne about your OCF Dipole
Alan,
The loss is determined by t
I like to build up a functionality; it must be my engineering
background. :-)
73,
Barry
K3NDM
-- Original Message --
From: "Lynn W. Taylor, WB6UUT"
To: elecraft@mailman.qth.net
Sent: 9/4/2017 8:55:02 PM
Subject: Re: [Elecraft] OT - WSJT-X & K3s
Barry,
You missed my poin
aving said that, I am using a good professional level
card for spectrum and CW Skimmer.
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Barry" ; "Lynn W. Taylor, WB6UUT"
; elecraft@mailman.qth.net
Sent: 9/4/2017 7:55:55 PM
Subject: Re: [Elecr
hether you are a KX3 or K3 user. I am being told the KX2 is also fine
and my K3s works great. The one thing I have found here and 1 other
station is having forgotten which ports I was using for what; I now have
that written down and life is sweet.
73,
Barry
K3NDM
-- Original Message --
F
onitor you received
audio. Levels are set on the Signalink's front panel.
73,
Barry
K3NDM
-- Original Message --
From: "Lynn W. Taylor, WB6UUT"
To: elecraft@mailman.qth.net
Sent: 9/4/2017 3:32:04 PM
Subject: Re: [Elecraft] OT - WSJT-X & K3s
If I was on the WSJT devel
o say that I had some
intermittent problems with LP-Bridge; I haven't seen any problems with
my present set up in over a few years.
73,
Barry
K3NDM
-- Original Message --
From: "Bob McGraw K4TAX"
To: elecraft@mailman.qth.net
Sent: 9/4/2017 2:45:26 PM
Subject: Re: [Elecraf
help to make it more appropriate to post
on a list that is primarily focused on ‘Everything Elecraft.”
FWIW,
Barry Baines, WD4ASW
(Currently in Boston, MA where the eclipse is expected to reach 65% of totality)
>
>
> 73 from David GM4JJJ
>
>> On 20 Aug 2017, at 16:31, David
wers-that-be. It
surprises me that such a customer-friendly and state-of-the-art group hasn't
already taken this step. Just food for thought...
Barry W2UP
Allan Zadiraka wrote
> Since I own a number of Elecraft products, I am very happy with the
> current
> setup. Separate forums
ld be much easier to pick
and choose topics of interest.
Thoughts?
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Make-this-email-list-more-manageable-a-forum-instead-tp7633522.html
Sent from the Elecraft mailing list archive at Nabbl
t way to go about the problem and
it would be appreciated if someone could put me on the right lines.
Many thanks
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
I'm planning to go very early Monday morning, north on I-25 into Wyoming.
I'm hoping their predictions are as accurate as those were for Y2K
end-of-civilization-as-we-know-it.
Barry W2UP
w0mu wrote
> I-25 In Colorado is going to be a complete mess. They are expecting
> over 5
augmented with a T2FD so that they could do
work with their ALE radios. Harris Corp. does the same.
73,
Barry
K3NDM
-- Original Message --
From: "Dave Heil"
To: elecraft@mailman.qth.net
Sent: 8/13/2017 4:03:25 PM
Subject: Re: [Elecraft] B&W Folded Dipole over an Armory
bably have Elecraft gear. That means you really need a truly awful
mismatch for your tuner not to be able to deal with it.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@mailman.qth.net
Sent: 8/13/2017 1:10:17 PM
Subject: Re: [Elecraft] Is it my KX3/antenna
Clay,
Sorry. You can't buy N1MM; they give it away.
73,
Barry
K3NDM
-- Original Message --
From: "Clay Autery"
To: elecraft@mailman.qth.net
Sent: 8/13/2017 12:55:57 PM
Subject: Re: [Elecraft] "Contester's Spectral Display" feature of N1MM
software
ately anything that can work with a KX3,K3, K3s
can be added to the mix. The downside to all of this is not have a large
enough monitor or room for multiple large monitors. :-(
73,
Barry
K3NDM
-- Original Message --
From: "Steve London"
To: elecraft@mailman.qth.net
Sent: 8/13/2
d it with the lowest loss line that makes sense for your
situation. All the rest is seat in the chair time and listen or call CQ.
73,
Barry
K3NDM
-- Original Message --
From: "Fred Moore"
To: elecraft@mailman.qth.net
Sent: 8/13/2017 10:37:37 AM
Subject: Re: [Elecraft] Is it my K
In case you haven't noticed, the sun died. It's even going to go dark across
the US in about 9 days :-)
Seriously though, I use N0HR's Propfire Firefox add-on. On the bar at the
bottom of the browser, I see current SFI, A and K at all times.
Barry W2UP
--
View this mes
antenna that is ground independent, put
up as high as you can, and if a little wire is good, more would be
better. Shortened and loaded antennas work, but you do pay a penalty for
their convenience.
73,
Barry
K3NDM
-- Original Message --
From: "Tony Estep"
To: "Elecraf
I suggest something like this:
http://www.hamqsl.com/solar3.html. It tells you A and K values SFI and
solar wind values. Additionally, there is a plug in for a number of
browsers from N0HR that shows you SFI, A and K values in a corner of
your browser.
73,
Barry
K3NDM
-- Original
.
Hope this helps,
Barry Baines, WD4ASW
(Currently in N.Myrtle Beach, SC)
> On Jul 31, 2017, at 4:10 PM, Gerry Miller wrote:
>
> HI GUYS, I AM USING A MAC BOOK PRO FROM 2010. I HAVE THE LATEST SOFTWARE AS
> OF THIS DATE. THE QUESTION IS, DOES "BIG E" HAVE A CABLE
radio
marketplace and reflects well their focus on meeting the needs of the customer
which in turn reinforces brand loyalty. We all appreciate the company that
stands behind their product.
FWIW,
Barry Baines, WD4ASW
(Currently in Columbia, SC)
> On Jul 29, 2017, at 12:12 PM, Don Wilhelm wr
e launch complex at Satish
Dhawan Space Centre in Sriharikota, India in late 2017.
>
> Any kind soul, please help me out with an upgrade path of which kits I need
> to get to do the full-duplex Satellite work that I used to enjoy. (I'm all
> set on the antenna
Elecraft K3/KPA500/KAT500 using the K3/0-Mini, so I’ll be interested to see how
well the Flex WAN capability functions when the ham shack has relatively slow
internet (at best 1.2 Mbps upload, 20 Mbps download).
Hope this helps,
Barry, WD4ASW
(Currently in Columbia, SC)
> On Jul 28
d still work well.
Food for thought,
Barry Baines, WD4ASW
(Currently in Boston, MA)
>
> Here are some ideas I’m considering:
>
> - mag loop in the rear window
> - thin wire loop on a roof rack
> - gamma match to the entire roof
> - surface acoustic waves
> - p
Even if you can get something to radiate, there's always the issue of RFI to
the car's electronics. Careful!
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Really-OT-Inside-the-vehicle-HF-antennas-possible-bonus-points-tp7632459p7632472.html
Sen
Tom,
Those are great improvements. I'll be updating this afternoon.
Thanks.
73,
Barry
K3NDM
-- Original Message --
From: "Tom"
To: "Elecraft"
Sent: 6/9/2017 2:27:54 PM
Subject: [Elecraft] New release of Win4K3Suite..you will want this one
Hello,
ces my
ham site.
FWIW,
Barry Baines, WD4ASW
(Currently in West Roxbury, MA)
> On Jun 7, 2017, at 10:08 AM, k...@gmx.com wrote:
>
> Hi, Can a KPA500 be operated remotely, for example, in a different room from
> the operator?
> Specifically would such remote operations be p
I forgot. Just so everyone doesn't think I gone around the bend, I'm
trying to finish up 5 band DXCC and only need to fill in on 80. I wanna
do it with 100 Watts and wire antennas.
73,
Barry
K3NDM
-- Original Message --
From: "BARRY LAZAR"
To: n...@c
ns on, the score will not be great.
I'm watching 80 now and will stay on until I fully run out of steam.
73,
Barry
K3NDM
Sent from XFINITY Connect Mobile App
-Original Message-
From: n...@comcast.net
To: elecraft@mailman.qth.net,k3...@comcast.net
Cc:
Sent: 2017-05-27 2:08:57 PM
Sub
80 seems to
be open also.
73,
Barry
K3NDM
-- Original Message --
From: "Wayne Burdick"
To: "Elecraft Reflector"
Cc: "k...@yahoogroups.com"
Sent: 5/27/2017 3:00:37 AM
Subject: [Elecraft] CQ WPX CW contest going on right now, through
tomorrow; lots of
ombine ‘connectivity’ provided by the internet with amateur
radio is a wonderful thing because it allows us to maintain relationships and
create new ones no matter where we are….
FWIW,
Barry, WD4ASW
>
> It’s only my opinion or other think the same?
>
> Ian IK4EWX
>
>
&g
time) and not both simultaneously.
73,
Barry
WD4ASW
> If so for $300 it’s starting to look like a good way to go, as I can’t do any
> control functions on my BigIR remotely, just control it’s frequency. I would
> also like to have a way to retract the antenna fully….
>
> 73 J
MikeL
> On May 16, 2017, at 11:58 PM, Michael Walker wrote:
>
> Hi Barry
>
> I have 2 RemoteRig pairs as I used to use them on my TS480's (I've been
> running remote for about 11 years now). I am now running remote with the
> Flex Maestro and the 6300 and
So again, it can all
be done with an iPhone/iPad/MacBook or any web-capable device.
To the extent that I can run a shack without running Windows and a PC, the
happier I am.
FWIW,
Barry Baines, WD4ASW
(Currently in Mercer, PA enroute to Hamvention…)
> I move my KPA-500 with me when I
Ed:
> On May 15, 2017, at 9:26 PM, Ed Muns wrote:
>
> In the past UPS has a spot in the Hamvention exhibits for accepting shipments.
The UPS Store is listed as being in Bulding 6 (6311-6312) at this year’s
Hamvention.
73,
Barry, WD4ASW
(Departing Boston to drive to Xenia o
having a good receiver that would tolerate 4-6 stations
being physically close. My K2 passed that test and I can't think of a
better all analog radio. Oh yes, I sold my K2 only because I fell for a
KX3.
73,
Barry
K3NDM
-- Original Message --
From: "Tom Hellem"
To: elecraft@
Don, and others, Thanks for the info, I suspected that might be the case.
Thats why I asked.
I appreciate the info,
73
Barry
NF1O
From: Don Wilhelm
Sent: Sunday, May 7, 2017 8:19 AM
To: barry whittemore; Elecraft
Subject: Re: [Elecraft] kxusb question
Barry
NF1O
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
rly
monitor equipment status.
FWIW,
Barry Baines, WD4ASW
> Regardless, keeping the amp physically small
> and lightweight is a great selling point. External antenna switches are
> readily available. For me, one input and one output is perfectly fine.
>
> John KK9A
>
>
Ken G Kopp wrote
> Trivia: It's not unusual for a grain train to be much longer that the
> tunnel through the Continental Divide.
Reminiscing back to my third semester of Physics in college (Relativity), it
depends on the speed of the train :-)
Barry W2UP
--
View this message
Yes, that is correct. Just feed it some RF and if the SWR is above
1.5:1, if memory serves, it starts to find a solution that yields a low
SWR.
73,
Barry
K3NDM
-- Original Message --
From: "Harry Yingst via Elecraft"
To: "John Pierce" ; "elecraft@mailman.qth
that is the only way.
73
Barry VK2BJ
On 7 April 2017 at 06:53, Richard Lamont wrote:
> My previous post might not have made it clear what I'm trying to achieve
> with the K3S.
>
> For RX audio, I usually listen on speakers. These mute when I plug the
> headphones in.
which needs to see both the ground
half of your antenna system and the antenna itself. The unum will
attempt to isolate parts of the system that should not be isolated.
However, you do need to keep RF off the transmission line going to the
shack and an isolator will accomplish this.
73,
Barry
x27;t make
that mistake again.
73,
Barry
K3NDM
-- Original Message --
From: donov...@starpower.net
To: "Elecraft Reflector"
Sent: 4/4/2017 5:19:47 PM
Subject: Re: [Elecraft] K3 loss of rx signal
Hi Ron,
If you've ever used BNC connectors in a lab environment -- espe
with full
duplex would be an awesome product as the number of amateur satellites in orbit
will continue to increase over the next couple of years…
Barry
WD4ASW
> On Mar 30, 2017, at 7:55 AM, Paul Stoetzer wrote:
>
> A KX2 or KX3 sized full-duplex 2m/70cm radio would be amazing and fil
,
Barry
K3NDM
-- Original Message --
From: "Marvin Wheeler"
To: Elecraft@mailman.qth.net
Sent: 3/30/2017 1:13:41 AM
Subject: [Elecraft] K3S Sound Card and Windows 10
Has Anyone else had problems with Windows 10 recognizing the sound card
in a
K3S. All of the drivers are up to date.
Tom,
I'm not sure which Winlink software you are running, but it should
work. Check to see that you have VOX on so that when you start to send
tone the radio goes into transmit. If that is OK, you may need to tell
your software to use software control for PTT.
73,
K3NDM
Tom,
It's probably nothing more than needing to re-install the driver for your
sub to serial adapter. That is usually the problem when this happens.
73,
Barry
K3NDM
Sent from XFINITY Connect Mobile App
-Original Message-
From: docw...@gmail.com
To: elecraft@mailman.qth.n
OOPs! Brain Cramp. The mode should be data a not digital a. Sorry for
the confusion
73,
Barry
K3NDM
-- Original Message --
From: "Don Pomplun"
To: elecraft@mailman.qth.net
Sent: 3/19/2017 2:40:27 PM
Subject: Re: [Elecraft] Help setting up digital
I, too echo my sense of
t and output to the USB codec. You will then set the radio to mode:
DIGITAL A. The rest is setting the levels according to the radio manual.
This is so much simpler than using external, or internal, sound cards
and needing additional cables for ins and outs.
73,
Barry
K3NDM
-- Original Me
same thing and it worked with VOX natively. Until I fixed it, I
had no problem with using MMTTY as my RTTY interface. Now, I can go back
to FLDIGI. There's a bug in there, but I'm not sure whether it's FLDIGI
or N1MM+
73,
Barry
K3NDM
-- Original Message --
From
And, a very early rig of mine, the STP-50, a low power 6 meter
transmitter that was fun to use. With two tubes, an
oscillator/multiplier and a PA. You were to supply 250-300 volts.
73,
Barry
K3NDM
-- Original Message --
From: "WP4CW via Elecraft"
To: "Wayne Burdick&
continue to use my SignaLink USB.
73,
Barry
K3NDM
-- Original Message --
From: "Don Pomplun"
To: Elecraft@mailman.qth.net
Sent: 3/8/2017 6:18:26 PM
Subject: Re: [Elecraft] K3S's built-in RTTY
TNX for all the helpful replies. A few referred to the K3S's "built-in
so
any problems of
running the caravan battery down even after two weeks with no 230volt
supply to charge the battery. There are some very wise heads on this
reflector who will add further comments to help you make a decision.
73 de Barry G4DBS
On 07/03/2017 21:13, elecraft-
Hello Ed,
I don't know if you can get this speaker in the states but I use a
Jabra powered speaker. I has an internal battery charged via a USB lead,
it also has Blue Tooth. The volume is good for the purpose you want it
for, it must work, no evil here Hi.
73 de Barry G4DBS
e fan and suck some air through.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-100-gets-hotter-running-remote-terminal-mode-vs-100W-out-tp7627175.html
Sent from the Elecraft mailing list archive at Nabbl
rweld.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/OT-Handling-Copperweld-wire-tp7626383p7626423.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
t has its losses at a minimum.
Do not worry about resonance. Most of us use antennas that if they were
resonant wouldn't reflect 50 Ohms anyway.
73,
Barry
K3NDM
-- Original Message --
From: "Ron D'Eau Claire"
To: elecraft@mailman.qth.net
Sent: 1/31/2017 11:53:
Ron,
Mea culpa. You are right. I misused definitions. I use doublets. :-)
73,
Barry
K3NDM
-- Original Message --
From: "Ron D'Eau Claire"
To: "'Emory Schley'"
Cc: elecraft@mailman.qth.net
Sent: 1/30/2017 9:54:51 PM
Subject: Re: [Elecraft] The &
I suspect that basically the about 60 feet of open wire
helped. I would guess that the antenna reflected a very low impedance
with a large reactive component, and the line length helped in
translating the antenna impedance to something better handled by the
tuner. Therefore, my losses are containe
l of the math I
ever had in college more than 50 years ago; I get a headache when I
think of ever having to do math again.
73,
Barry
K3NDM
-- Original Message --
From: "Emory Schley"
To:
Cc: elecraft@mailman.qth.net
Sent: 1/30/2017 8:38:17 PM
Subject: Re: [Elecraft] The &
ennas. My attitude has always been what's a db or two
among friends, and quite often that is the number we are sweating. But,
if you can't make it exactly like Kraus writes, get as close as you can
and let your antenna tuner worry about the match and don't think about
that extra d
r 200'. I
would have done better, but my local power company added another
handicap, line noise. Bottom line: Throw some wire up and see if it can
be loaded. If yes, go for it.
73,
Barry
K3NDM
-- Original Message --
From: "Wayne Burdick"
To: "Tom McCulloch"
Tom,
On page 32 of the K3s manual is a small note on this:
"K3S returns to receive mode after a time delay you set using DELAY."
This applies in semi QSK only. And, make sure you do not see the QSK
icon.
73,
Barry
K3NDM
-- Original Message --
From: "Tom"
e going to put in many, many hours. I
will never get to your level; I just don't have the low loss pipe
between my ears and fingers.
73,
Barry
K3NDM
-- Original Message --
From: "Chester Alderman"
To: "'Barry'" ; "'Tom'" ;
"
;s another
useful tool in the bag along with the spectrum display that can quickly
show where there is activity, but most importantly, I can see where the
DX station is working that other guy in a split operation; this works
better than having a second receiver.
73,
Barry
K3NDM
-- Origin
Does the radio automatically go into chirp mode if it detects operation from
Cuba?
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-past-chirp-report-tp7625892p7625920.html
Sent from the Elecraft mailing list archive at Nabble.com
. :-)
73,
Barry
K3NDM
-- Original Message --
From: "Bill Wiehe via Elecraft"
To: "Elecraft Reflector"
Sent: 1/9/2017 9:21:02 PM
Subject: [Elecraft] K3 DATA A Mode not working
I recently downloaded a JT65 program and after several days of flawless
operation, my K3 stopped tr
I've used this one for over a year, and pleased with it. My wire antennas
are only about 25 ft away and no noise issues:
https://www.amazon.com/gp/product/B00KSQ8ZNA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.n
Year,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Terry Brown" ; elecraft@mailman.qth.net
Sent: 1/1/2017 9:44:06 PM
Subject: Re: [Elecraft] Need help from an EZNec user on a horizontal
loop question
Terry,
Have you considered an 80 meter inverted L?
e played with a few other things, but I found Win4K3 about the
best overall solution.
73,
Barry
K3NDM
-- Original Message --
From: "Harry Yingst via Elecraft"
To: elecraft@mailman.qth.net
Sent: 12/25/2016 11:36:02 PM
Subject: [Elecraft] I'm looking for terminal program
f it.
Use that com port in the utility to connect to the K3, and make sure you
have the data rate and data bits spec'd correctly. Once the utility gets
correct information, it should work perfectly.
73,
Barry
K3NDM
-- Original Message --
From: "Rick Braun"
To: "Elecr
tion
integration.
73,
Barry
K3NDM
-- Original Message --
From: "Kevin - K4VD"
To:
Cc: "Elecraft Reflector Reflector"
Sent: 12/2/2016 4:30:28 PM
Subject: Re: [Elecraft] KX3 and FLDIGI
OK - I got the answer concerning I/Q audio to fldigi. No advantage as
fldigi does not pr
well.
73,
Barry
K3NDM
-- Original Message --
From: "Bill DeVore"
To: elecraft@mailman.qth.net
Sent: 11/29/2016 10:25:48 PM
Subject: [Elecraft] Digital on the K3S
I'm new to Elecraft and was wondering how most of you handle digital
communications.
Use the K3 Util
generally operate split in such situations and transmit on VFO B and
receive on VFO A so that I can tune around the transmit frequency and pick
out stations with the very narrow filter.
73
Barry VK2BJ
On 29 November 2016 at 10:39, N2TK, Tony wrote:
> Tnx Ian,
> On 80 and 160M this past w
Other than DDUtil and TRX-Manager, are there any other software logging
programs out there that directly support the KPA500 so the
amp automatically tracks the frequency of whatever rig is interfaced to the
software?
Thanks & 73,
Barry
ve access to the P3 screen and
buttons from the K3/O-Mini operating position in the other room. This means of
course that there isn’t much point having the P3 on anyway if using the
K3/0-Mini in the other room.
Hope this helps,
Barry Baines, WD4ASW
Westborough, MA
It ends up that John KN5L gave a thorough treatment to the topic in this
thread (might need to be a member of the KX3 Yahoo Group to read):
https://groups.yahoo.com/neo/groups/KX3/conversations/topics/5869
73, Barry N1EU
On Thu, Nov 3, 2016 at 4:08 PM, Ron D'Eau Claire wrote:
> Y
I'd appreciate knowledgeable estimates of the loss in dB through the KX3
ATU when working into a 44ft (NorCal) doublet fed with twinlead, with or
without a BL2 balun inline, on 20/17/15M.
Thanks & 73,
Barry N1EU
__
Elecraft mai
check your cables for proper connection and that you indeed
have internet between the K3-Mini site and the K3/K3S.
Hope this helps,
Barry Baines, WD4ASW
Westborough, MA (residence)
Folkston, GA (ham station)
> On Oct 29, 2016, at 5:26 PM, Jim Cary wrote:
>
> I just packed up both m
Dave,
Interesting problem. I used used RMS Express, but I used a SignaLink
USB for interface and T/R. I had no problems this way. Everything seemed
to work as I would have expected.
73,
Barry
K3NDM
-- Original Message --
From: "Dave"
To: elecraft@mailman.qth.net
Sent:
Hi Grant
It is the K3DSPUPGD board. It is buried away but only on the Spare Parts
and Mod Kits page on the Elecraft website. I got one a few months ago when
I upgraded my K3 with all the other new boards as well.
73
Barry Simpson VK2BJ
On 20 September 2016 at 10:19, GRANT YOUNGMAN wrote
Hi Chris
How old is your K3 ?
I built mine in 2008 (s/n 1397). It has all the "works" and I have
recently upgraded it with all the new boards available.
I have never experienced what you are suffering and I am running all of the
latest firmware and a KPod.
Barry VK2BJ
On 19 Sept
as reconfigure the 4005i as necessary.
Hope this helps,
Barry, WD4ASW
Westborough, MA
> On Sep 13, 2016, at 11:04 AM, Jim Miller wrote:
>
> For those of you implementing remote operation: what are you using for an
> IP accessed power switch? I need one port to control station A
SignaLink USB, it's pretty easy. You will need a cable for the radio and
reset the jumpers, or get the prewired header plug. The SignaLink USB
does control the radio, no problem. I would say go for it.
73,
Barry
K3NDM
-- Original Message --
From: "Brian ve3bwp Pietrzyk"
At one time there was a paper on the web page written by either Wayne or
Eric ( I can't remember which) that had recommendations on filter
selection. You might try and find it or get the author to republish.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
or later ? Otherwise it
will not work. Likewise you need to upgrade K3 Utility to 1.16.3.11 or
later so you can program the K3 with macros.
73
Barry VK2BJ
On 30 August 2016 at 05:03, Randy Lake wrote:
> I just hooked up the Kpod and and get no response to any functions. I read
> th
ARRL should be notified
of your concern via mail or email, and before 1 October. The sooner the
better. I have already done this.
73,
Barry
K3NDM
-- Original Message --
From: "Richard Thorne"
To: "Elecraft Reflector"
Sent: 8/21/2016 2:14:57 PM
Subject: [Elecraft] R
I've got a like new K3s that I'm offering with or without a P3:
http://swap.qth.com/search-results.php?keywords=Like+new+Elecraft+K3s+and+P3&fieldtosearch=titleordesc
Please respond off-list.
Thanks & 73,
Barry N1EU
_
Jim,
Thanks for the pointer to the briefing. That's good input.
We used the Honda 1000. We didn't seem to see anything on site from
that particular generator. However, we could have.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@
concerned, just
run the K3 off a 12 volt battery.
73,
Barry
K3NDM
-- Original Message --
From: "Ramon Tristani"
To: "Elecraft Mailing List"
Sent: 8/10/2016 10:46:55 AM
Subject: [Elecraft] K3 and inverter generators
I want to take my K3 out for portable use and also tra
‘clock’ maybe high, the “intrinsic value” (nostalgia and
fun of building) probably makes it worthwhile to me.
Thanks for the heads up.
73,
Barry Baines, WD4ASW
Westborough, MA
> On Aug 8, 2016, at 12:03 PM, Ken G Kopp wrote:
>
> Likely of interest to many of us.
>
> w
u will get some
strange effects.
I also had a problem when the K3 to KPA500 suffered a broken conductor.
So it could be either.
The new leads from Elecraft are much better and more flexible than the ones
originally available when the KPA500 first came out.
73
Barry VK2BJ
On 8 August 2016 at 10:21
301 - 400 of 1510 matches
Mail list logo