Re: [Elecraft] Dayton Hamvention

Yes, we will have Elecraft T-shirts. Come early! Eric /elecraft.com/ On 4/27/2016 12:22 PM, Steven Stuckey wrote: Will shirts be available for sale at Dayton this year? __ Elecraft mailing list Home:

Re: [Elecraft] Sherwood's receiver performance table updated

Especially since the prior thread under this name has been closed. 73 Eric Moderator /elecraft.com/ On 4/27/2016 11:25 AM, Phil Wheeler wrote: But this discussion seems to have evolved into something difficult to relate to the thread title. You might want to change the title! Phil W7OX On

Re: [Elecraft] Sherwood's receiver performance table updated

Folks - In the interest of relieving our list readers from severe single topic email overload, let's end this thread now. While an interesting topic with lots of good comments, its had a -huge- number of postings. It is time to give it a rest. (I would have jumped in earlier yesterday, but I

Re: [Elecraft] K-Pod Question

Its assembled only. There is just one pcb inside. 73, Eric /elecraft.com/ On 4/20/2016 10:31 AM, Jim Finan wrote: I guess my question didn't make it. Question is: Is the K-Pod a kit? Can't seem to find any reference to that on the product sheet or website. If it's been asked here before,

Re: [Elecraft] K-Pod power

Yes, that will work. 73, Eric elecraft.com _..._ > On Apr 19, 2016, at 6:20 AM, Art via Elecraft > wrote: > > Wayne, > > > Would there be any problem using a Y connector from the external 13 v socket > on the back of the K-3 to power both the P-3 and K-Pod? > >

Re: [Elecraft] Elecraft Factory Mains Power Down This Morning

Mains Power, internet and phones are finally back up 100% at Elecraft HQ. Whew! Eric /elecraft.com/ On 4/18/2016 7:34 AM, Eric Swartz - WA6HHQ, Elecraft wrote: There is a massive power outage this morning covering the industrial park where Elecraft HQ is located. Phones are currently off

Re: [Elecraft] K-Pod well received at Visalia

Its only 3.5 x 3 x 1 inches (9 x 7.5 x 2.5 cm) for the enclosure, plus the height of the VFO knob (same as the K3S/K3). Details at: http://www.elecraft.com/k-pod/k-pod.htm 73, Eric /elecraft.com/ On 4/18/2016 3:27 PM, Ron D'Eau Claire wrote: Well, a K3S size knob nearly fills the "front

[Elecraft] Elecraft Factory Mains Power Down This Morning

There is a massive power outage this morning covering the industrial park where Elecraft HQ is located. Phones are currently off-line for our sales and support team. We will also be delayed replying to emails today. (All emails sent to us will still be stored at our off-site ISP. Our web page

Re: [Elecraft] KX3/PX3 Linux Utilities for Raspberry

Guys, this thread was closed several days ago. Please see my list posting on this topic 73, Eric Moderator elecraft.com --- Sent from my iPhone 6S > On Apr 8, 2016, at 5:10 PM, Phil Wheeler wrote: > > > >> On 4/8/16 4:45 PM, Brendon Whateley wrote: >> Phil, >> >> With

Re: [Elecraft] Elecraft Utilities

Agreed. Let's end the thread for now. (feel free to email with any questions.) I apologize, but open sourcing the utility would create a number of problems and significant extra support expense that we can not afford. Improper use of that proprietary interface can certainly brick the radio,

Re: [Elecraft] Stripping toroid leads

Let's end this thread at this time. We actually closed it mid-day yesterday due to the large number of postings. :-) 73, Eric Moderator /elecraft.com/ On 4/6/2016 8:45 PM, Edward R Cole wrote: Ron, Most coils I am winding are typically No.22 to No.16 solid copper magnet wire. I hold the

Re: [Elecraft] Stripping toroid leads

Looks like we've beat this one to deaf. Let's end the thread in the interest of reducing email overload for our readers. 73, Eric Moderatorororor /elecraft.com/ On 4/6/2016 12:20 PM, Mel Farrer via Elecraft wrote: I prefer the solder pot set on max to strip enamel and all other non thermal

Re: [Elecraft] OT: Mobile operation "bible"

We're hitting the OT posting limit on this one. Let's wind it down in the next 2-3 posts. 73, Eric Moderator from time to time.. /elecraft.com/ On 4/1/2016 10:23 AM, Edward R Cole wrote: My only attempt at HF in a mobile was on my old 78 Scout Traveler (diesel). Before heading to AK I had a

Re: [Elecraft] OT: Decoding high speed CW

Hi folks - We closed this OT thread yesterday due to the excessively high number of postings. 73, Eric Moodulator /elecraft.com/ On 4/1/2016 9:17 AM, Jerry T. Dowell wrote: My Conditional Class code exam in 1954, administered by an Extra Class ham, was mixed code groups (5-letter as I

Re: [Elecraft] OT: Decoding high speed CW

Folks - we are flooding the reflector with the posts on this OT thread. Let's take it off-list and close the thread at this time 73, Eric /elecraft.com/ On 3/30/2016 4:29 PM, Ron D'Eau Claire wrote: People seem to be confusing US Ham and Commercial license exams. Fred is right, the

Re: [Elecraft] [K3] Tokyo Hy-Power HL-1.2KFX amp interfacing (to ALC or not to ALC?)

Thread has been ended. Eric Moderator /elecraft.com/ On 3/30/2016 9:01 AM, Jim Brown wrote: Guy has it exactly right. 73, Jim K9YC On Wed,3/30/2016 8:18 AM, Guy Olinger K2AV wrote: If the rise and fall data curves used for "keying" vary their "sharpness" according to speed, then the

Re: [Elecraft] [K3] CW Speed & bandwidth (was Tokyo Hy-Power HL-1.2KFX amp interfacing (to ALC or not to ALC?))

Folks, let's also end this thread. 73, Eric Moderator for life. /elecraft.com/ On 3/30/2016 8:38 AM, Nr4c wrote: Yes, indeed it was the "Lady Lex". Sent from my iPhone ...nr4c. bill __ Elecraft mailing list Home:

Re: [Elecraft] [K3] Tokyo Hy-Power HL-1.2KFX amp interfacing (to ALC or not to ALC?)

Let's end this thread at this time in the interest of relieving other readers from overload. If you feel compelled to continue the CW b/w discussion, please take it to private email. 73, Eric /elecraft.com/ On 3/30/2016 8:18 AM, Guy Olinger K2AV wrote: One could discourse all day on what

Re: [Elecraft] IC-7300 video - things to come

As a private pilot I fly with a Garmin GTN750 touch-screen GPS NAV/COM in a Cessna 182. Its powerful and quite intuitive to use, even in turbulence. (They included ridges along the four screen sides when needed to steady your hand.) It actually reduces the amount pilot load and time spent

Re: [Elecraft] K3S audio board for K3 upgrade?

Hi Ron, That review of the K3 audio by Rob Sherwood was on a very early K3. We quickly addressed the high freq harmonic issues (most of which were above 4-5 kHz and were more than 50-60 dB down) with a K3 DSP board revision that included a change to a beefier low ESR power supply filter choke

Re: [Elecraft] Is the [DEV] email list down?

[Dev] is an internal private Elecraft list for developers. It does not accept posts from addresses not subscribed to the list. Make sure you are posting from the same exact email address you are receiving the dev list emails, and not an alias. Please email me directly, instead of the elecraft

Re: [Elecraft] KX3/PX3 Keyboard CW.

Make sure VOX is enabled while in CW mode on the KX3. 73, Eric elecraft.com _..._ > On Mar 16, 2016, at 11:17 AM, James Griffith wrote: > > I have a Logitech K400 keyboard wireless adapter plugged into my PX3. The > keyboard transmits to the PX3 screen. Tapping Control T

Re: [Elecraft] OT: K3 and High Tension Wires

Lots of good info, but due to the large number of posts, let's end this thread now in the interest of lowering list overload for others. 73, Eric Eric /Modulator - //elecraft.com/ On 3/16/2016 10:27 AM, Ken G Kopp wrote: Well said, Dave. Unlike another poster, you appear to have an

Re: [Elecraft] 10 MHz external reference - GPSDO

Hi Ed, Minor note on our TCXO part numbers: The tighter temp stability TCXO (0.5 ppm typical) is actually Elecraft part number "TCXO3-1". This is the p/n that shows on the K3S order page and in the K3S kit manual as an upgrade. The standard TCXO (5 ppm) supplied with the K3S and K3 has the

Re: [Elecraft] OT Cat 7 Ethernet Cable

Folks - Let's rest this thread for now as we have seen a number of posting on this OT today. Thread closed. 73, Eric Lost moderator /elecraft.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] OT: 20m moving QRM. [;>))

rom: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric Swartz - WA6HHQ, Elecraft Sent: Thursday, March 3, 2016 7:33 PM To: Elecraft Reflector Subject: Re: [Elecraft] OT: 20m moving QRM. Time to close this thread in the interest of relieving email overload for others. Looks like the O.P.

Re: [Elecraft] OT: 20m moving QRM.

Time to close this thread in the interest of relieving email overload for others. Looks like the O.P. has a good path to take to remedy his problem. 73 Eric Lost moderator /elecraft.com/ === __ Elecraft mailing list Home:

Re: [Elecraft] Icom 7300 is available

Folks - yes, this thread was closed earlier today. Please take this to private email. We are way past the OT POSTING LIMIT. 73, Eric Moderator - Really! elecraft.com --- Sent from my iPhone 6S > On Mar 2, 2016, at 9:38 PM, dave wrote: > > Eric has closed this thread but I

Re: [Elecraft] Icom 7300 is available

Folks - Let's end this topic now to relieve others from email overload. 73, Eric Moodulator /elecraft.com/ On 3/2/2016 9:34 AM, lstavenhagen wrote: oh, I totally agree - even my K2 nips at the heels of a 7700 and probably even a 7800, especially in a pileup. I just didn't want to bury Doug's

Re: [Elecraft] Best Place to Sell Equipment?

Due to the large number of OT posts on this topic, let's wind it down now in the interest of relieving email overload for our other readers. 73, Eric moderator when the natives allow it.. /elecraft.com/ On 2/26/2016 10:48 AM, Edward R Cole wrote: I find selling on e-mail reflectors better

Re: [Elecraft] OT: CW Contest logging question

Folks - we're exceeding the OT posting limit. Let's end the thread at this time to alleviate email overload for the rest of our readers. 73, Eric Elecraft moderator whenever possible.. /elecraft.com/ On 2/22/2016 3:15 PM, Nr4c wrote: So we need to change the "599" that n1mm put in the log to

Re: [Elecraft] QSLS from VP8STI and VP8SGI

Probably because this DXpedition used Elecraft K3s and KPA500s. In general, please do not criticize postings of others on the list. That is outside of our list guidelines. I'll jump in when appropriate. Eric Moderator this week.. /elecraft.com/ On 2/22/2016 10:49 AM, Poul Erik Karlshøj (PKA)

[Elecraft] Elecraft email List Official Guidelines 2016

Elecraft eMail LIST GUIDELINES 2016 For those of you who are new to the list, (and for those of us who have rapidly failing memories) here is a quick list of things to remember when posting to this list. Please save this for future reference. The most important thing to remember is that this

Re: [Elecraft] K3s Odd sound vibrations Edit - Hypothesis, Steps, Conclusion, and Request.

Make sure you use non-acidic silicon glue that is compatible with PC boards to do this. Other types can degrade traces etc on the board. Eric /elecraft.com/ On 2/17/2016 11:05 AM, Jerry Moore wrote: That's exactly what I found. After speaking with Howard I've wedged the ferrite with a bit of

Re: [Elecraft] CQ WPX RTTY Contest

Hi Bill, If the P3SVGA is set for displaying K3 decoded digital or CW text, another external text display program (rumlog, K3 Utility text window etc.) that accesses the K3's decoded text over the serial or USB command interface can not be running and displaying the decoded text at the same

Re: [Elecraft] 10.118.288 dead carrier

We're at OT 10 posts in a very short time. Let's end this thread now and take it to direct email at this time, in the interest reducing email overload for other readers. 73, Eric List Moderator, Modulator etc.. /elecraft.com/ On 2/16/2016 11:51 AM, N2TK, Tony wrote: In upstate NY (65 miles

Re: [Elecraft] 75m

Ad noted in my prior post (covering the other subject line for this thread), this OT thread is now closed in the interest of reducing list email overload for our readers. 73, Eric /elecraft.com/ On 2/14/2016 10:01 PM, Richard Fjeld wrote: It doesn't help that the FCC is not monitoring the

Re: [Elecraft] abject buffoonery

Folks - We're drifting a bit far OT from our usual focus. As this is a repeating topic in many other forums,it is best covered there or in private emails. Let's end this thread at this time to reduce list email overload for our readers. 73, Eric /elecraft.com/ On 2/15/2016 6:34 AM, w7aqk

Re: [Elecraft] Balun suggestions

Guys - please take this off reflector until you are in agreement. 73 Eric List Moderator /elecraft.com/ On 2/5/2016 8:15 PM, Ron D'Eau Claire wrote: Gee, Wes. It's only basic RF engineering. If you'd care to be specific about any objection, please do so. I'll be glad to get into details on

Re: [Elecraft] Balun suggestions

Ignore my last - I mistakenly replied to an old email. Eric /elecraft.com/ On 2/9/2016 1:04 PM, Eric Swartz - WA6HHQ, Elecraft wrote: Guys - please take this off reflector until you are in agreement. 73 Eric List Moderator /elecraft.com/ On 2/5/2016 8:15 PM, Ron D'Eau Claire wrote: Gee

Re: [Elecraft] Price Increase Alert (Now Feb 8th)

through this weekend time to to place their orders. :-) (See below for details of the original announcement.) 73, Eric elecraft.com _..._ > On Jan 27, 2016, at 3:02 PM, Eric Swartz - WA6HHQ, Elecraft > <e...@elecraft.com> wrote: > > Early alert for our Elecraft list r

Re: [Elecraft] [P3TXMON] 200W sensor at higher power levels

Its probably OK for short durations at up to about 350W. If you hit it with 1500w it might survive, but that will cause a couple of low power resistors to dissipate up to 35W, so they might be in danger of failing. Note that the 2000W coupler is good down to 1W and is what I use for all my

Re: [Elecraft] Noise from LEDs

And it looks like its time to close this thread. Wow, 17 posts in less than 22 hrs. Time to let others recover from the email overload. In general, please self moderate in the future. 73, Eric List Moderator /elecraft.com/ On 2/2/2016 4:30 PM, Guy Olinger K2AV wrote: Jealous. Transported

Re: [Elecraft] Love me K3 line

Let's end this thread (and its proposed renamed subject version) at this time in the interest of relieving email overload for our readers. Its exceeded the short term limit for number of postings on a topic. 73, Eric List moderator on occasion.. /elecraft.com/ On 2/1/2016 6:03 AM, Bob McGraw

Re: [Elecraft] Price Increase Alert for Feb 4th.

On Jan 27, 2016, at 6:02 PM, Eric Swartz - WA6HHQ, Elecraft <e...@elecraft.com> wrote: Early alert for our Elecraft list readers: We're finally implementing the planned price changes that we first mentioned late last year. We ended up delaying that change due to both the large holiday

[Elecraft] Price Increase Alert for Feb 4th.

Early alert for our Elecraft list readers: We're finally implementing the planned price changes that we first mentioned late last year. We ended up delaying that change due to both the large holiday season order rush and several ham shows, both of which always generate a lot of sales sales

Re: [Elecraft] KPA500 finals blown

The KPA500 will automatically go into standby if it feels it is getting too hot. This is done with a safety margin between that temperature and the max operating temp for the PA's. Its perfectly OK to operate it at the full fan speed. We expect it to go there in normal higher duty cycle

Re: [Elecraft] Postal Price Increase

Folks - we're drifting way OT. Let's close this thread now in the interest of controlling list volume and overload for others. 73, Eric Moderator /elecraft.com/ On 1/21/2016 10:09 AM, Jeff Schmidt wrote: Yes, but think about it - fuel prices are... oh, wait. nevermind! ;^) On 01/20/2016

[Elecraft] VP8STI South Sandwich Isl K3 DXpedition on the air.

The VP8STI South Sandwich Isl. DXpedition is on the air with Elecraft K3 transceivers and KPA500 amps. For a pic of their site, see: http://elecraft.com/DXpeditions/Elecraft_VP8.jpg also see: http://www.intrepid-dx.com/vp8/photos.php Its COLD down there! 73, Eric /elecraft.com/

[Elecraft] K5P Palmyra Dxpedition on the air with Elecraft rigs

K5P Palmyra Island is on the air with with K3S transceivers, P3s and KPA500s. See: http://www.dxsummit.fi/#/?dx_calls=K5P and http://palmyra2016.org Pic of K5P op positions in action at: http://elecraft.com/DXpeditions/kp5ops.jpg 73, Eric /elecraft.com/

Re: [Elecraft] [PX3] - symmetrical reflections about the center point

Hi Kevin, Try removing each end of the IQ cable between the KX3 and PX3 and firmly re-inserting it. What you are seeing usually is the result of one end not being fully inserted in the jack, leaving one of the IQ lines open. Eric /elecraft.com/ On 1/10/2016 4:42 AM, kevino z wrote: Not

Re: [Elecraft] Wide CW Signals

In the interest of reducing list overload, lets end this thread at this time. Lots of good replies already and a ton of traffic. 73, Eric List modulator /elecraft.com/ __ Elecraft mailing list Home:

Re: [Elecraft] K3S VFO-A Dial Knob

If you look at the main home page link of the one K5WA posted below, http://www.rkrdesignsllc.com/ , near the bottom of the page it states: RKR Designs LLC no longer sells or services Ten Tec products. For all Ten-Tec products, Sales and Service, go to: www.tentec.com The tentec.com site has

Re: [Elecraft] K3S VFO-A Dial Knob

Soon, but we're waiting for commitment on delivery for the next increased production run of these. As soon as we have that date and if it looks reasonable, we'll put the K3S VFO grip ring on the order form. Our prime reason for being careful on this is to not sell out all of our current

[Elecraft] Elecraft Website back up today for Verizon FiOS & DSL customers

Wow - this has been frustrating for us (and all of our Verizon based customers!) Verizon appears to have fixed the routing problem from their FiOS and DSL customers to Elecraft.com sometime last night. The fix slowly migrated through the net and based on customer feedback received here, most

Re: [Elecraft] Elecraft Website back up today for Verizon FiOS & DSL customers

can get to it. Whew! Have a great weekend everyone. 73, Eric /elecraft.com/ === On 1/8/2016 4:49 PM, Eric Swartz - WA6HHQ, Elecraft wrote: Wow - this has been frustrating for us (and all of our Verizon based customers!) Verizon appears to have fixed the routing problem from their FiOS and DSL

Re: [Elecraft] Fw: Re: Elecraft Website Down

Wes - That was an inappropriate response and outside of the list guidelines. Guys - ALWAYS keep it polite, even when you disagree. Regards, Eric Moderator /elecraft.com/ On 1/7/2016 1:09 PM, Wes (N7WS) wrote: Go ahead and unsubscribe. I have no interest in the subject either, but I have a

Re: [Elecraft] K3 - AFSK anamoly? No replies, try again

This sounds like a crystal filter offset setting is incorrect. (Also check to make sure your IF shift setting on the front panel is not set to an extreme.) Check the setup menu entry for each crystal filter and its offset setting. 8 pole filters should be set to a zero offset. 5 pole filters

Re: [Elecraft] Whole house surge protector at the main breaker?

We closed this thread around 3:30 today. 73, Eric Moderator /elecraft.com/ On 1/6/2016 4:22 PM, Don Kiser wrote: I use a Square D Homeline SurgeBreaker Model HOM2175SB __ Elecraft mailing list Home:

Re: [Elecraft] Whole house surge protector at the main breaker?

Lets end this thread now and take it to direct email between posters, if needed, as we're flooding the list with a huge number of single topic postings. Its certainly exceeding the near term topic posting limit. Please remember that this is the Elecraft list and that most posts shuld pertain

Re: [Elecraft] Elecraft website and Fios

One other data point I forgot to mention - Our ISP's engineers are directly working with Verizon to determine where the problem is and to get it resolved. 73, Eric /elecraft.com/ On 1/5/2016 10:28 AM, Eric Swartz - WA6HHQ, Elecraft wrote: We've been beating on the Verizon Fios issue accessing

Re: [Elecraft] Elecraft website and Fios

We've been beating on the Verizon Fios issue accessing elecraft.com with our team non-stop since it first started to occur, and we are also in direct contact with our hosting ISP for Elecraft. Their engineering team is hitting it hard from their end. Let's drop the thread on here for now to

Re: [Elecraft] suggested PC??? Real RS-232 ports

Folks - we're getting pretty OT. Lets wind this thread down at this time in the interest of keeping the signal to noise level reasonable for other readers. 73, Eric /elecraft.com/ On 1/5/2016 4:07 PM, WB4JFI wrote: Original serial and parallel ports on the original IBM backplane were I/O

Re: [Elecraft] Fios and Elecraft Website Access

Its driving us crazy here too. Verizon has acknowledged the problem and is working with our ISP to resolve it for them. (Hopefully soon!) I'll post here as soon as there is a resolution. 73, Eric /elecraft.com/ On 1/5/2016 3:59 PM, David Lago wrote: I'm experiencing the same problem here in

Re: [Elecraft] Elecraft website now accessable through FIOS in NY

It appears its not a DNS problem, but is is specific to Verizon and how it transfers web page data from our web site. We've been able to reproduce it through remote access to several of our customer's (who use verizon) PCs. It appears to be related to page size and possible proxy MTU settings

Re: [Elecraft] Elecraft website now accessable through FIOS in NY

with no problem. elecraft.com http page does not. Verizon should be aware of the problem by now and hopefully working on it. AB2TC - Knut Eric Swartz - WA6HHQ, Elecraft wrote It appears its not a DNS problem, but is is specific to Verizon and how it transfers web page data from our web site

Re: [Elecraft] Fios and Elecraft Website Access

We've checked here and nothing appears wrong with the actual server for the Elecraft web site. We've checked it here via multiple providers (ATT, Verizon 4G cellular, ATT optical). All those appear to access it OK. It appears the problem resides at Verizon (and possibly others) with their

Re: [Elecraft] Elecraft website

Folks - Let's end the web site access reports at this time. This topic certainly been beaten to death and elecraft.com is clearly working from this end. 73 and have a great new year! Eric /elecraft.com/ On 12/31/2015 5:00 PM, Sid Frissell wrote: I just brought up the website on my iPad using

[Elecraft] KIO3B Upgrade now on our Order Page

We are now ready to take orders for the KIO3B upgrade kit for the K3. This upgrade Includes: KIO3B 3 board set (KIO3B main, digital and audio boards), RJ45-RS232 cable, USB cable, h/w and manual. Its can be found on our order form at: http://www.elecraft.com/elecraft_prod_list.htm#kio3bupkt

Re: [Elecraft] OT National Hearing Test

Since this is more or less OT from our primary areas of discussion and has had a lot of postings, lets end the thread at this time. 73, Eric List Moderator - Ho, Ho, Ho /elecraft.com/ __ Elecraft mailing list Home:

Re: [Elecraft] [K3 powers off]

Guys - please keep any political comments off list, as these are outside of our posting guidelines. Regards, Eric /elecraft.com/ On 12/21/2015 2:16 PM, Wes (N7WS) wrote: No, you weren't "transmitting" and you have a *trans*ceiver. If you are just going to listen, you should use a three

Re: [Elecraft] KIO3B pricing (was: Re: K3IOB)

Hi Olli, Yes, 389.95 is the correct price. This is not a single board. It is a three board set that costs much more than our old KIO3B to manufacture. The board set also now contains a new USB Codec, USB Comm port, Internal USB hub and additional logic to handle routing of data between the

Re: [Elecraft] KIO3B pricing (was: Re: K3IOB)

Also note that the KIO3B has all of the original KIO3 analog and digital functionality and HW. Adding the usb sound and USB data hw to that did not increase the end price by over $200. Lastly at ham radio market volumes, which are much lower than most consumer products, the cost to develop and

Re: [Elecraft] K3IOB

We were able to accelerate expected date to open orders to begin the middle of next week, so I authorized a couple of upgrades for repairs that were holding for them here. Stay tuned! We'll likely have it up on the order form the middle of this next week or earlier. Mass shipping will start

Re: [Elecraft] KIO3B

Hi Bill (and everyone else interested in the KIO3B upgrade), Unfortunately pulling the KIO3B boards out of a packaged K3S kit or already built K3S is not practical, and would really cause production problems here. We build the assembled K3S base units ahead of time before option configuration,

Re: [Elecraft] K3S RS232 "Y" Connector causing port conflict

If you need to block the TX lines from the amp to the K3 (or from the amp to the P3's computer connection if that is also in the system) making a custom cable or taking a M-F 9 pin adapter with the proper pins broken off can make it easy.) The key thing to remember with RS-232 is that while

Re: [Elecraft] K3S RS232 "Y" Connector causing port conflict

Hi Charles, When the K3S is using the USB comm port for talking bi-directionally to the computer, is is also echoing the K3S reply data out the RS232 port for Amplifiers, Steppir antenna controllers etc to listen to for band and frequency information. 73, Eric /elecraft.com/ On

Re: [Elecraft] Advice on First HF Antenna

Lot's of good info, but let's end this thread now in the interest of reducing email overload for others, as it has certainly exceeded the near term posting volume limit for a single topic. 73, Eric Moderate Moderator /elecraft.com/

Re: [Elecraft] Craig KD0TXL...best antenna

Lot's of good info, but let's end this thread under its multiple headings now in the interest of reducing email overload for others, as it has certainly exceeded the near term posting volume limit for a single topic. 73, Eric Moderate Moderator /elecraft.com/ Eric /elecraft.com/ On 12/8/2015

Re: [Elecraft] K3 Noise Blanker problem?

One other note - I see you posted to Elecraft and topband reflectors on your post. Please do not cross post when posting to the Elecraft list as that in-turn causes a flood of email to the other list and back to here, including bounce messages from non-members that fill our admin emaibox. 73,

Re: [Elecraft] P3 question - few signals show on the waterfall

Have you tried adjusting the REF Level? This is a per band base level for the display that directly impacts the minimum signal level displayed. There also is a SVGA Menu item called 'Bias' that adjusts the sensitivity on the SVGA waterfall to compensate for different monitors etc. 73, Eric

[Elecraft] List Manners, etc.

Its come to our attention that some list members have sent **private** emails chastising or criticizing others who may have made a comment or posted a question to the list. This is in direct violation of our "keep it friendly" list policy. A note to aspiring list police: Please restrain the

[Elecraft] Elecraft email List Official Guidelines 2015 - Updated

Elecraft eMail LIST GUIDELINES 2015-16 For those of you who are new to the list, (and for those of us who have rapidly failing memories) here is a quick list of things to remember when posting to this list. Please save this for future reference. The most important thing to remember is that

Re: [Elecraft] [Bulk] Re Elecraft] Crackling in Headphones

We have not seen any problem with the synth like this, and we are not experiencing it on our current K3S's or upgraded synth K3 radios, or on our personal K3s and K3S's, those in the lab here or those in for repair. My suspicion is that there is an intermittent elsewhere in the radio of the

Re: [Elecraft] Need a KFL1-4 Manual

Hi Mike, This was a web editing mistake here. I'll make sure we get the link to the most recent K1-4 Manual back up. 73, Eric /elecraft.com/ On 11/26/2015 12:13 AM, Mike Morrow wrote: That may help. http://www.elecraft.com/manual/KFL1_4_man_rev_A.pdf

Re: [Elecraft] K3S USB RS232 P3 Conundrum

RS232 DB9 "Y" off of the computer side of the P3. Make sure you are only listening and not hooked up to send data to the P3/K3 via this path. We basically take the USB comm data between the K3 and the computer and then echo it out the RJ45 CBLP3Y connector to the computer input DB9 on the P3.

Re: [Elecraft] K3 NB problem

Hi Larry, For the IF NB I usually use a level of 3, or 4 max, with a narrow typically for the width. This generally works quite well for me with minimal intermod. More aggressive thresholds and wider widths significantly increase the likelihood of nearby strong signal intermod with IF based

Re: [Elecraft] KPA500 troubles

Probably best to change the topic of this, as it has drifted into a different area. Eric /elecraft.com/ On 11/13/2015 9:01 PM, Jim Brown wrote: On Fri,11/13/2015 1:30 PM, Wes (N7WS) wrote: Note, there is no mention of any directivity, or lack thereof, so I would take it that this is a

Re: [Elecraft] KPA500 troubles

Hi Jack, I apologize for any consternation this has caused you. Since multiple components burned through the LPF PC board, that is major damage and would require replacement of the whole LPF board, which is a major cost component of the amp. (Taking out this board and replacing it requires

Re: [Elecraft] Fwd: RE: K3 DSP processor speed

OK folks - we're weaving too far OT. Let's close this thread at this time in the interest of reducing email overload for the majority of our list subscribers. 73 Eric Moderator /elecraft.com/ On 11/10/2015 11:29 AM, Gary Gregory wrote: Does that mean CW = Communication Wizard? On 11

Re: [Elecraft] K3 DSP processor speed

Folks, we closed this thread earlier today. 73, Eric /elecraft.com/ On 11/10/2015 12:06 PM, GRANT YOUNGMAN wrote: It seems to me that “drowning in Kool Aid” is no worse than what are little more than anecdotal comments about how one radio is better than another one in regards to noise

Re: [Elecraft] K3 DSP processor speed

Guys - This thread is closed. Eric Moderator - really! /elecraft.com/ On 11/10/2015 3:00 PM, David Gilbert wrote: What on earth would cause you to make a statement like that? A large number of rigs still on the market have fundamental and inexcusably bad key clicks and phase noise that

Re: [Elecraft] Soldering crimped connectors is not a good thing.

Hi, we closed this thread last week. There is also a ton of past searchable info on APP connectors, crimping vs soldering etc. the list archives. See: http://www.elecraft.com/elist.html 73, Eric Moderator on occasion.. /elecraft.com/ On 11/9/2015 11:14 AM, Stephen Shearer wrote: I would

Re: [Elecraft] Soldering crimped connectors is not a good thing.

Folks - let's wrap this thread this morning in the interest of reducing list email overload - we're hitting the single topic limit. 73, Eric List moderator /elecraft.com/ __ Elecraft mailing list Home:

Re: [Elecraft] IMD and supply voltage

This thread is now closed. We're drifting way off topic.(We asked that it be would down last night.) 73, Eric /elecraft.com/ On 10/30/2015 7:19 AM, Jim Bolit wrote: NO!! Us Californian's understand dB. If you ain't increasing power in 10 dB increments, don't bother. Eimac made

Re: [Elecraft] TX ESSB for K3 and CM500 headset mic

Guys - I'm going to close this thread -immediately- as arguing pro-con on ESSB is outside of our list guidelines. There are plenty of other venues to do that. Let's keep it primarily Elecraft focused here with a smattering of other non-controversial ham radio topics ;-) 73, Eric List

Re: [Elecraft] Which of these would make the best power supply for the K3(S)?

Folks - we're hitting the posting limit for this topic. To avoid overload for other readers, lets wind it down tonight and then close the thread.. 73 Eric List Moderation, Inc. /elecraft.com/ On 10/29/2015 2:25 PM, Jim Brown wrote: On Thu,10/29/2015 2:13 PM, Fred Jensen wrote: The

Re: [Elecraft] IMD and supply voltage

Folks - we're also hitting the posting limit for this topic. To avoid overload for other readers, lets wind it down tonight and then close the thread.. 73 Eric List Moderation, LLC /elecraft.com/ --- On 10/29/2015 4:57 PM, Matthew Cook wrote: Frank, Actually No. You can build solid state

Re: [Elecraft] Which of these would make the best power supply for the K3(S)?

Just extremely busy today here at Elecraft HQ.. :-) 73, Eric /elecraft.com/ On 10/29/2015 5:16 PM, Peter Pauly wrote: Eric must be on vacation. This is where is would be forcing me to close the thread. __ Elecraft mailing list

Re: [Elecraft] QST Review of KSYN3A synth has erroneous TX phase noise plot

And with that, lets end the thread. 73, Eric Moderator, from time to time.. elecraft.com _..._ > On Oct 21, 2015, at 10:01 AM, Wayne Burdick wrote: > > We also bear some responsibility, since the review was sent to us before > publication. The Elecraft CSI team is still

<    1   2   3   4   5   6   7   8   9   10   >