Would you lop off the ? *after* clicking the button to start sending the
confirmation? If yes, then it would be a problem, because the software would
have sent the whole confirmation to the radio as soon as you clicked the
button. Otherwise it wouldn't.
Julian, G4ILO
G4ILO's Shack: www.g4ilo.com
terminal mode to send RTTY and PSK31
but because of the inability to do end the transmission quickly, or send
newline characters, or differentiate between upper and lower case (not
important for RTTY, obviously) it isn't a useful capability at the moment.
-
Julian, G4ILO. K2 #392 K3 #222.
http
, but it would be worth bearing in
mind that that configuration may not work with a different adapter.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
, the trouble is that the K2 and K3 are the only radios that implement
this in a properly thought-out way, so developers of general purpose
software are not interested in doing the necessary work to exploit it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
on that is the Reverse Beacon Project
http://skimmer.dxwatch.com/ which plots stations heard by people using the
CW Skimmer software, however there are far too few users (and Skimmer is
prone to mis-copy calls) for it to be very useful at the moment.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
. At present, though, the only solution appears to be to
get a Ten-Tec Omni VII. I think Elecraft missed a trick in not designing the
K3 so a web based interface like the Omni VII could have been an option.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
an on-board sound
card, of course, to digitise the audio.
Using Hamlib for rig control, the device could work with any radio, so the
market for it would be much bigger than just the K3. I'd have thought such a
product would be commercially viable, wouldn't you?
-
Julian, G4ILO. K2 #392 K3 #222
to A and
back to D again step.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out
to download hundreds of messages that I'll probably never have
time to read when I get back.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
equalization to cut the topmost frequency by -16dB and the next one down by
-8dB, which to my ears gives a much more restful sound.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2
control with
streaming audio already?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out
. But it
will not actually change the transceiver frequency switching from LSB to
RTTYR.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
of it. :(
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out---tp838886p839976.html
Sent from
complaints about it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Harmonic-Distortion-tp839544p840044.html
, asked in another post.)
I believe that Eric can whitelist individual members whose postings are
being bounced, so the answer is to drop him an email direct, stating the
problem.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
don't think any spam filter is 100% accurate.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/E-mail-Warning
as far away from the PSU as it
will go.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Harmonic
.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Harmonic-Distortion-tp797780p832695.html
Sent from
software as well.) So
it remembers just one filter selection.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2
bypassed when the control was turned to
0. This added sufficient extra distortion to cause the -27dB figure that was
quoted rather than the -30dB that Elecraft expected.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
My guiding principle has always been if it ain't broke, don't fix it. Since
nothing is broken for me that the latest firmware builds fix, I'm sticking
with the version I'm using.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
of the serial control lines being used for a purpose other than hardware
flow control. Why not just use AFSK? Alternatively, get a PCI serial port
board (assuming you aren't using a laptop.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
distribution
of noise across the whole audio spectrum, but a narrow segment of noise
whose amplitude distribution follows the shape of the filter. In other
words, I think it's normal.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
functionality.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-LOGGING--SOFTWARE-tp791425p791769.html
Sent
warrant further investigation.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3--1456---data-modes
doberman wrote:
How about the dust covers someone suggested a few or so posts ago??
Reviewed here:
http://www.eham.net/reviews/detail/7387
Or ask your xyl to make a dust cover for your K3, like mine did. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's
to be impossible nowadays to buy tools of any sort that are not
cheap cr*p made in China from poor quality steel that gets chewed up at the
first tough job it encounters.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
. When you have used
all the parts you are probably ready for a snack. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
get an adequate drive for the CW Skimmer program into
the line input socket with the K3 Line output level set at just 2. Other
software seems to need about a 10 - 15 level.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
getting there, most people are happy now, but the nature of ham radio
is that users have widely different priorities, and some will always find
something to grumble about.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
RigCAT support doesn't work reliably with the K3
under Windows.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2
it seriously useful to have labelled compartments for each size
of screw, nut etc. They had to be sorted out at the inventory stage, so to
mix them back up together and then sort them out again when needed makes no
sense to me, and just adds another source of error.
-
Julian, G4ILO. K2 #392 K3
want to do with a $4000 radio.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-competition-from-Icom
in and out of it.
Being able to remote control a radio is not a lot of use unless you can get
audio in and out as well, and if you need a computer to handle that then you
might as well use it also to handle the CAT commands.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
I found that one worked
just as well on real serial ports, and also worked with USB ones) may use
two for the K3 as well.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft
with indoor antennas.
The frequency Dave picked, 3630, is better for me because the Q of my
antenna is quite sharp and it's resonant at about 3600 so I can use it on
data modes and CW. The SWR at the top of 80 doesn't bear looking at.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
be failure of the device that switches the
supply to the TX stages, so the TX side is getting power during RX when it
shouldn't be.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm
I'm trying to figure out some code to center a PSK signal in the filter
passband. In order to do this, I need to know which sideband is being used
in data mode, so as to know which way to change the transceiver frequency.
The K3 appears to use USB, but what does the K2 do?
-
Julian, G4ILO
that you have to register each time you try to post. I tried
re-registering in the (forlorn) hope it would stop doing that, and I guess
that's why you did, too.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
up. Often it freezes when clicking
the Initialize option as well.
Fldigi apparently works best with Hamlib, but that appears to be a Linux
only thing, at least I can't find a Windows version of it.
So if anyone has got this program to work I'd like to know how they managed
it.
-
Julian
not an operating issue, but
it's distracting.
Has anyone else come across this? What was the resolution?
I remember this coming up once before. I believe it was a problem with
grounding the shields of the cables between the rig and the computer.
-
Julian, G4ILO. K2 #392 K3 #222.
http
to this point. So the noise will be
attenuated as well as the signal. Perhaps it won't be as sensitive, but the
loss won't be as much as 17dB. I find it hard to accept your implication
that Elecraft designed an IF output that is effectively useless.
-
Julian, G4ILO. K2 #392 K3 #222.
http
://www.nabble.com/help/Answer.jtp?id=36
explains how it's done.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context: http://n2.nabble.com
.
- Experimental integrated soundcard CW decoder added.
- Support for CW Skimmer added.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context
recording of frying, like a chorus of 100 switched mode power
supplies. I hoped the much-vaunted DSP NR would have an impact on this, but
it just makes the voice sound distorted and narrow. Perhaps I'm expecting
too much as well.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http
, this would require someone
to set up a server for it so it's not something we can just go ahead and do.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Virtual-Elecraft-Users-Net-anyone
.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Virtual-Elecraft-Users-Net-anyone--tp726815p727655.html
Sent from the Elecraft mailing list archive at Nabble.com
we should be easy enough to find.
Even if no-one is interested in the idea of a net, if you are intrigued
enough to install the HamSphere software and you see me on, I'm probably
bored and would appreciate a chat.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham
Jim Brown-10 wrote:
On Fri, 15 Aug 2008 12:32:56 -0700 (PDT), Julian, G4ILO wrote:
I find myself horizontally
polarized, unable to access the shack, bored,
Sorry to hear of your polarization. For boredom, have you considered
reading?
Yes. CQ and QST coincidentally arrived
attic without doubling back. Anyone know of something like that
which is commercially available? All I could find was the G3OJV 80plus2
which is just over 50 feet long, and I am not sure if it would fit, or work,
in my attic.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham
emphasis does that better, regardless of whether
or not it sounds natural.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Microhpone-tp681857p682498.html
Sent from the Elecraft mailing
or the input to the sound card. Skimmer seems happy at the low
setting, but it is too low for my PSK31 software.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context: http://n2.nabble.com/K3-Audio-tp673868p683362.html
Sent from
for incompatibility existed with
a paddle. :) My Kent paddle looks like it was made for the K3. The black
hammer finish base matches the K3 paint colour perfectly.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context
the
limits of error of the power metering and the ALC. Personally I set my K2
for 10W for SSB, and with the compression at 3 could light up all the green
segments on speech peaks.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View
a listen.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/UK-Elecraft-net--tp676986p677133.html
Sent from the Elecraft mailing list archive at Nabble.com
of drive.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Heil-Adapter%2C-which-one--tp676288p677154.html
Sent from the Elecraft mailing list archive at Nabble.com
. Anyway I'm pleased with the Heil mic and the
ability to just flip a switch to get the DX setting is easier than going
into menus.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3
the K3 has a perfectly good
speaker. Anyway, Real Hams Use Headphones. If I want hi-fi I'll go
downstairs and listen to music on the stereo. :)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context: http://n2.nabble.com
that contact has ended.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/ESSB-Works-Well-tp666449p666824.html
Sent from the Elecraft mailing list archive at Nabble.com
from
there? Home Page - Software - K3 Software Downloader - Beta release
instructions - FTP link.
If that still doesn't work, either your firewall is blocking FTP or you need
a better web browser (try Firefox.)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com
.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-FPF-Load-failed-tp666390p666390.html
Sent from the Elecraft mailing list archive at Nabble.com
, but also functions
as a PTT in other modes, though as has already been stated, most programs
that can talk to the radio can send RX and TX commands over the serial
protocol so for that purpose the additional control line isn't necessary.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http
wb8yqj wrote:
Great job guys - filled in the new CONFIG table and a
fine index to boot. vy Fb...
Is it available in hard copy to purchase? Alternatively, does anyone know of
a service that can print and bind a PDF file in the UK?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
authorized me to post this offer to the list, as the reflector is
blocking him as a spammer.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/New-K3-Manual-tp661189p662165.html
Sent from
where you went. This is of course how I noticed the last digit issue
above.
Why not use the RIT control for fast QSYing?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Momentary
more
or less wiped out the signals I was trying to decode.
So my guess is that your USB to serial connector is the culprit.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K2-KIO2-Serial
it
was due to a deficiency in the decoding software. I would have thought that
DSP was capable of doing a better decoding job than any analog frequency
discriminator circuit.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message
use it.
We're licensed amateurs, we know what the rules are, we don't need our
radios playing nanny to make sure we don't do anything we're not supposed
to.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http
worth the saving.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3---shipping-size--tp575070p575207.html
Sent from the Elecraft mailing list archive at Nabble.com
system.
No problem here using Firefox under Linux. :) I'm not suggesting you should
switch to Linux to solve this, but why not try Firefox?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com
John-483 wrote:
Ken
Does it happen in the bypass mode?
I wonder if there may be a little SWR left after the tune cycle, and
when you key, the ATU tries to take it out.
John
k7up
But the KAT3 shouldn't try to tune unless you press the button, should it?
-
Julian, G4ILO
an empty FL1 slot for several months while I waited
for the FM filter to become available and never noticed the problem that is
being reported.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3
, simulated QSO overs, or you can feed it a text file and
it will send that as code.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/OT-code-practice-w-MP3-and-iPod--tp527381p527500.html
Sent
string. But again I
would have thought most contest exchanges, even CQs, could be accommodated
within 24 characters.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Issues-with-cw-keying-line
program KComm, and possibly HRD, are the only ones that do.)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Issues-with-cw-keying-line-in-N1MM-with-K3--tp475061p475467.html
Sent from
of Windows. Give me a thin client that can run
Firefox and I can do just about anything.
The only place I still need a real PC is in the shack, because for logging,
data modes and most other ham radio activities you still need real
applications and I can't see that changing.
-
Julian, G4ILO
http
desk mic, wouldn't a foot
switch be more use?
Not for long overs. I move my feet about to much.
--
Julian, G4ILO
Member: RSGB, ARRL
QRP Station: Elecraft K3 #222, K2 #392
G4ILO's Shack: www.g4ilo.com
___
Elecraft mailing list
Post to: Elecraft
paying a bit more anyway just for the convenience.
--
Julian, G4ILO
Member: RSGB, ARRL
QRP Station: Elecraft K3 #222, K2 #392
G4ILO's Shack: www.g4ilo.com
On 10/03/2008, David Ferrington, M0XDF [EMAIL PROTECTED] wrote:
at the end of the day, would it be worth Elecraft's while to do
this - I
, that's
called wine, and it does run some Windows programs OK, including most
of mine, such as VOAProp. Others, such as MixW, crash.
Perhaps it would be better to continue this thread in the forum
mentioned above, since it's a bit off-topic for this list?
--
Julian, G4ILO
Member: RSGB, ARRL
QRP Station
Do you drink whisky, bourbon, vodka? Ice cube trays work quite well
for the small components (and the problem of not having ice to go in
your favorite tipple gives an extra incentive to get that K3 finished
quick!) Cheers! :)
--
Julian, G4ILO
Member: RSGB, ARRL
QRP Station: Elecraft K3 #222, K2
to me when monitored on-air. I've monitored the transmission
using both the K2 (which isn't really a good tool for this since its
opposite sideband responses aren't identical either) and the FT-817
which has a fairly wide standard SSB filter and sounds the same on
either sideband.
--
Julian, G4ILO
, are not
planning on going anywhere and are in good health and not
significantly past retirement age. But that still leaves a lot of
others, I'll bet, who need at best a promise, but if not that an
*accurate* prediction of when their order will be met.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's
good K2.
And at this point I wonder why I need a hobby pursued by people who
can think of nothing better than hurl insults at others who express
opinions they just don't agree with.
I'm out of here, too.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
K3s to
discuss and fewer people are kicking their heels waiting for them.
You'll just have to get used to it.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
- --
R. Kevin Stover, ACØH
-BEGIN PGP SIGNATURE-
Version
, since I have
never had any reports of the display being garbage, and if the data
itself was corrupted the program would probably misbehave or crash.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
On 06/12/2007, Stephen Prior [EMAIL
their hands
on a very exciting new radio some slack too?
73,
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
a couple of years ago and it was very
interesting seeing how my signal sounded over there, or comparing what
beacons he could hear at his QTH with what I was hearing from mine.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
you change from SSB to data
mode? Doesn't the K3 have independent settings for data mode so once
it's set up you just select data and it's all ready to go?
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
.
Surely the uploader should do some kind of integrity check, instead of
attempting to upload a duff file to the radio? It's not exactly rocket
science. There's a thing called MD5 that's very good for this...
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham
On 04/12/2007, Thom LaCosta [EMAIL PROTECTED] wrote:
Ya gotta be careful with humor...it sometimes gets booked on one of the
flights
that goes into the ionosphere.
Well, there aren't enough ions up there at the moment to bounce it
back. Or anything much else, unfortunately...
--
Julian
There should be topless models, of course. The radios, I mean, so we
can see the electronics. :)
(Bet this doesn't get past the spam filter.)
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
On 04/12/2007, [EMAIL PROTECTED] [EMAIL
of the
firmware utility? Then when you are off to Thailand you can just
program in their limits, and when you come back you can remove them
again.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
My reply to NN4X's posting was bounced by qth.net as spam. Anyone who
wants to read it can see it here
http://www.zerobeat.net/smf/index.php/topic,104.0.html .
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
now he seems to have stopped. I haven't stayed there myself, though I
did have an exchange of emails a few years ago when I thought about
going up there, and I think he would allow use of his shack.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums
to me to have an
advantage in ease of deployment at temporary locations than the
regular centre fed sort.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing list
Post
should sound the same as 80m LSB.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
situation here, with my attic antenna farm. Someone
whose antenna is on a 50 foot mast 50 feet away may never notice a
thing.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing
in the K2 did. This doesn't
seem to me like a good use of a presumably limited resource.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
understand from discussions that may have been off-list,
USPS options are not allowed for international K3 orders because the
maximum insured value is not great enough.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
separately for the two antenna
sockets, that would be a big plus for me.
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
701 - 800 of 1097 matches
Mail list logo
