vered that if I didn't sit still my body would warp the crystal
frequency by capacitive coupling (very early FM).
No, I don't think any ham forgets that very first QSO. What joy!
73 de Dick, ka1oz
Elecraft K3/100K #859
G5RV D
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Thanks for your response. k3util does not appear to execute, either when
double-clicking the icon or when executing within a terminal. It just
seems to sit there.
73 de Dick, ka1oz
Elecraft K3/100K #859
G5RV Doublet
On 01/22/2014 05:30 PM, Dave
Hi-
I've not been able to run k3util since upgrading to Ubuntu 13.10. I had
no problem running on 13.04 and I can still run CQRLOG with no problem.
k3util: k3util_1_13_6_17
Has anyone had similar troubles?
--
73 de Dick, ka1oz
Elecraft K3/100K #859
G5RV Do
t over
use it.
73 de Dick, ka1oz
Elecraft K3/100K #859
GAP Titan-DX Vertical
G5RV Doublet
On 06/17/2013 05:25 PM, Mel Farrer wrote:
> It was standard practice at AT&T to clean and coat the large 2 VDC battery
> terminals with petroleum jelly. I still use it especially on the stan
friend. I can't imagine replacing it with any other rig on
the market today.
--
73 de Dick, ka1oz
Elecraft K3/100K #859
G5RV Doublet
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
rther than Elecraft.
73 de Dick, ka1oz
Elecraft K3/100K #859
G5RV Doublet
On 04/04/2013 11:54 AM, Tom Branton wrote:
> Good morning everyone,
>
> I am looking for my forever ham rig and have a concern. Most of the
> questions and issues discussed here involve fairly technical elec
.
--
73 de Dick, ka1oz
Elecraft K3/100(K) #859
G5RV Doublet
Titan-DX Vertical
On Sat, 2012-09-29 at 17:08 +0100, David G4DMP wrote:
> It has happened to me a few times, Mike. What is frustrating is that
> after power up, the K3 goes back to a previous setting. You then have to
>
Line In.
--
73 de Dick, ka1oz
Elecraft K3/100(K) #859
G5RV Doublet
Titan-DX Vertical
On Sat, 2012-09-01 at 23:05 -0700, iain macdonnell - N6ML wrote:
> On Sat, Sep 1, 2012 at 10:49 PM, Dick Roth--KA1OZ wrote:
> > Finally waded into digital modes with FLdigi, but have a K3
missing? (I'd like to operate without the constant
whine of PSK ringing in the shack.)
Any help in clearing this up will be much appreciated!
--
73 de Dick, ka1oz
Elecraft K3/100(K) #859
G5RV Doublet
Titan-DX Vertical
__
Ele
've learned how to grasp the
obvious more quickly since then.
--
73 de Dick, ka1oz
Elecraft K3/100(K) #859
G5RV Doublet
Titan-DX Vertical
On Wed, 2012-08-29 at 08:59 -0700, Ron D'Eau Claire wrote:
> My experiences were just the reverse, in the San Francisco, Los Angeles and
> S
ge
"Tx TEST" to prevent accidental carrier transmission if they want to try
out their fists on your keys.
Sure, I could shut the station off, but I tend to cling to my old ways
when I used hollow state gear (last rig before the K3 was a National
NCX-3) and it required long warm-ups.
--
73
Hi there--
I'm running Ubuntu 12.04 with K3 Utility v1.12.3.28 with no problems at
all! I don't know the difference between Ubuntu and Lbuntu, but perhaps
David Fleming does (he coded the K3 Utility for Linux).
73 de Dick, ka1oz
Elecraft K3/100K #859
GAP Titan-DX Vertical
G5RV Doubl
Competing with viscous, vulgar qrm. I doubt that the foul-mouthed idiot
kept his rig down to a kilowatt. He was 40 over in Eastern Mass.
I could hear net control once in a while just over the noise when the
qrm wasn't there, but today just wasn't my day.
--
73,
Dick KA1OZ
Middleb
Jim, W4RKS, relayed for me. Thanks, Jim!
--
73,
Dick KA1OZ
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
pen4...@aol.com wrote:
>
> Hello everyone. Here is the Elecraft SSB net report for Jan. 9, 2011. Band
> conditions were not great and we experienced
Strangest thing!! Could not get CW decode to work under 4.22. Loaded
4.18 and it decodes like a champ. Reload 4.22 and the champ is still
there! Go figure!
--
73,
Dick KA1OZ
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
Dick Roth, KA1OZ wrote:
> I just noti
I just noticed last night that my K3 #859 wasn't decoding CW. I'm
running 4.22 firmware. I might go back to 4.17 to see if the function
returns.
--
73,
Dick KA1OZ
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
Dick Dievendorff wrote:
> Hi, Ben!
>
e ham radio equipment manufacturers.
Vive le difference!!
--
73,
Dick KA1OZ
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
Seems to me that adjusting the "Pitch" to one that most comfortably
stands out from others and then using "Spot" ought to accomplish the
same thing. No?
--
73,
Dick KA1OZ
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
Bruce Beford wrote:
> Sam
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.ne
Please help support this email list: http://www.qsl.net/donate.html
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
S7P
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Ple
it in the manual config menus.
[snip]
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
one
>
[snip]
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
y is a difference.
>
> Sent from my iPhone
>
[snip]
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
ad, the whole
> thing behaves poorly. It's very touchy.
>
> The K3 is the last place I'd look until the above ruled out.
>
> 73, Guy.
>
> On Mon, Mar 22, 2010 at 8:50 PM, Dick Roth, KA1OZ wrote:
>> Greetings fellow Elecrafters--
>>
>> I was chasing RF
;d throw this out there to the Elecraft Knowledge Base before
tearing the rig apart.
K3>>>Diamond SX-100 wattmeter>>>B&W Low Pass Filter>>>surge
suppressor>>>antenna feed to the world.
--
73,
Dick
day. Listened from 1750 till 1820. I
>> assumed the net might be waiting for the QSOs to clear from 14.316 and
>> 14.313, but nothing happened after they cleared either. Was the net
>> convened on a different freq?
>>
>> Terry, W0FM
>>[snip]
--
73,
Dick
_
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list
handle the key!
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: m
urso
>
> kfourso.googlepages.com
>
>
[snip]
I tried to log into the net, but propagation was terrible up here near
Cape Cod. I would hear an occasional voice surface through the noise
and don't know if anyone heard me calling.
Wayne Burdick wrote:
> Dick,
>
> What version of HRD are you using?
>
> tnx
> Wayne
>
> On Oct 9, 2009, at 3:28 AM, Dick Roth, KA1OZ wrote:
>
>> This is a very plain vanilla setup. I'm using an iambic paddle
>> plugged into the paddle input and my
nx
> Wayne,
> N6KR
>
>
> http://www.elecraft.com
>
> On Oct 8, 2009, at 7:00 PM, "Dick Roth, KA1OZ" wrote:
>
>> Len, K3LJ wrote:
>>> Dick, I tried it with my K3 #892 with no problems during TX Test. I am
>>> running the latest Beta
the ordinary other than that.
>
> Len, K3LJ
>
>
>
> Dick Roth KA1OZ wrote:
>> Greetings--
>>
>> I discovered tonight, having downloaded and installed 3.41 a few nights
>> ago, that when connected to HRD, my K3, #859, has problems with the
>> keyi
back to 3.30, the problem vanished...ceased to exist,
connected to HRD or not.
Has anyone else discovered this?
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http:
eel more comfortable with a "final" release on your
K3, you can certainly downgrade to release 3.14, or you can benefit from
the constant drive towards perfection with 3.30, which you will find
just peachy.
My 2 cents...
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit
ounds great regardless of mic.
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
.net/donate.html
>
Yup...my Auto-Notch works now!! Good goin' guys!!
I've been told by family members that I tend to gush, but honestly,
where else can you find the level of customer service that we have with
Elecraft? Truly terrific!!
--
73,
Dick ka1oz
Middleborough, MA
Dick Roth, KA1OZ wrote:
> Ron D'Eau Claire wrote:
>> Strange - it works just as described in the Owner's manual here: auto notch
>> on SSB, manual (only) on AM/CW/DATA.
>>
>> Is it possible your AGC was turned off?
>>
>> Ron AC7AC
>>
&g
Ron D'Eau Claire wrote:
> Strange - it works just as described in the Owner's manual here: auto notch
> on SSB, manual (only) on AM/CW/DATA.
>
> Is it possible your AGC was turned off?
>
> Ron AC7AC
>
> -Original Message-
>
> Dick Roth KA1OZ wr
I have had a couple of occasions where that fixed weird
> problems in the past.
>
> 73 from just down 24 a bit...
>
> Ken K3IU
> K3 #202
> Portsmouth, RI
> ~~~~``
> Dick Roth, KA1OZ wrote:
>> Tried listening for the Elecraft SSB net a
Tried listening for the Elecraft SSB net at 1800. There was a
heterodyne or other interfering signal on 14.316. I tried to use
Auto-Notch, but nothing changed. Then I went to manual and notched it
out completely.
Hope I'm not adding too much noise to the FW discussion!
--
73,
Dick
James Sarte wrote:
> I don't recall ever seeing that come up with 3.14
>
> Try reinstalling the firmware. Or better yet, update it to the latest
> release.
>
> 73 de James K2QI
>
> On Fri, Aug 7, 2009 at 1:20 PM, Dick Roth, KA1OZ <mailto:raro...@comc
turn it back on
again.
Anyone else seen this?
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
io I could grow with. "Fait acomplie." What I didn't know was that
I would witness the process of its growth.
Glad to be and Elecrafter!
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
__
ttention cannot help but feed the
"generosity" and effectiveness of aid that is reflected in the Elecraft
Reflector.
Way to go, Folks!
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna: Titan-DX
_
I didn't see where it would buy me anything.
All in all, I love my K3. I'm an engineer, and I've been on the
air for over 40 years. The K3 is a real gem.
73,
john WA1ABI
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman
on my dummy load, I was receiving a station S3, which on Ant 1 was
20 over S9.
Has anyone else seen this crosstalk? If so, what is considered
"acceptable"?
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Antenna:
to know that Elecraft is always looking
for ways to improve the breed, but knowing that the foundations are
solid is the cornerstone to the success of this rig. You guys are just
plain wonderful!
Happy Holidays to all,
--
73,
Dick ka1oz
Middleborough
rs.htm
Elecraft web page: http://www.elecraft.com
Yes...Kenwood. Since you are using dynamic mic elements you don't have
to be concerned about bias voltage pin-outs.
Happy Holidays!
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 85
so plenty of folk
could see and hear and touch the beauty.
It was my first year at the convention, and I hope to see Elecraft there
next year when I go again.
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
Radio: Elecraft K3/100(Kit) SN 859
Ante
e air).
If it wouldn't take too much re-coding, I think such a change would be
worthwhile.
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 859
Titan-DX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
. It's time to play!
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 859
Titan-DX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.)
unix groups and
the English language. Thanks John, Brendan and David.
Now, as others are wont to say: "Let's end this thread", since I am now
on the proper path.
Thanks again to all.
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX
_
all over again. I
probably need to put it in a startup file somewhere.
73's,
John AA0VE
Dick Roth KA1OZ wrote:
Brendan, this was way too simple! I found that I had to execute
k3util as root, otherwise it wouldn't open the ttyUSB0 port.
I performsed a download of the latest firmwa
l show you more
If you need some more help on any of this please contact me directly
I am deeply familiar with Centos and redhat.
On Fri, 2008-06-13 at 19:27 -0400, Dick Roth KA1OZ wrote:
Hi there--
My main pc runs a variant of Red Hat Linux (CentOS 5.1). Has anyone
been able to properly i
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.ne
other than regular mail, at
your expense, please email [EMAIL PROTECTED] and let him know.
-Gary
Dick Roth KA1OZ wrote:
Gary Surrency wrote:
Hi Dick,
Sorry to hear those things were not successful.
We can send you a new front panel, if it seems likely it was the
problem all along.
I'll
Dick Roth KA1OZ wrote:
Greg wrote:
Try this...
Starting with the power OFF. Turn it ON but HOLD the power button for
about 10 seconds...till you see MCU LD on the LCD. The LCD will not
be lit. This is a forced MCU load state. No using your K3 utility
program in advanced mode, load JUST
. Within a few moments, all faculties
returned and I was able to power it down for the night.
Has anyone seen this before?
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX
___
Elecraft mailing list
Post to: Elecraft@mailm
ip the plate, increase
the drive, etc.).
Thanks for the pointer.
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscri
KA1OZ*
/Fri May 16 23:29:35 EDT 2008/
Hi Folks--
I finally got to reading parts of the Owner's Manual and tried to set up
the rig to monitor my mic audio while in Test Mode. I can't get either
front panel H
USB) made sense.
Regardless of whether I'm set MAIN:FP or MAIN:rP.
Any ideas where to start first?
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
a check just in that
box, nothing else. Then click on send checked items to K3.
After the MCU file loads and the radio resets, then upload the DSP1, FPF
and DSP data table files.
Standing by
- Original Message - From: "Dick Roth KA1OZ" <[EMAIL PROTECTED]>
To: &
I think I might have brushed on past a comment for another Elecrafter
that the fan panel may be flipped (crackle finish side inside). I think
he's right. It looks like the wrong side was up when the panels were
stamped.
Am I correct?
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Ki
just that each and every time I press the button the rig may or may not
turn on.
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post t
Greg wrote:
hahahaha... No problem Dick. Good night.
Sounds like you may be OK now. Start using your new rig but let us know
if the power problem creeps back in.
73
Greg
AB7R
- Original Message - From: "Dick Roth KA1OZ" <[EMAIL PROTECTED]>
To: "Greg&qu
Greg wrote:
Don made a good point. When you assembled the power pole, did you make sure
when inserting the pins that you heard a distinct click? If not, they may
not be completly seated. Try pushing them in more to see if they click.
Greg
-Original Message-
From: Dick Roth KA1OZ
Greg wrote:
Dick,
Even though the FP LCD does not light up, Do you see anything on the display
like MCU LD?
Greg
-Original Message-
From: Dick Roth KA1OZ [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 08, 2008 6:04 PM
To: Greg; Elecraft Reflector
Cc: [EMAIL PROTECTED]
Subject: Re: ERR
19:24:14 DSP1 firmware load is complete
19:24:14 Setting K3 RS-232 to 4800 bits per second
19:24:15 Elapsed time: 273 seconds
19:24:15 Ready
There you go!
73,
Dick ka1oz
--
No virus found in this incoming message.
Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.9/1416 -
Release Date
firmware file DTBL0008.HEX to DSP1
19:24:10 Waiting for MCU reset to complete
19:24:14 Verifying DSP1 firmware load
19:24:14 DSP1 verification succeeded
19:24:14 DSP1 firmware load is complete
19:24:14 Setting K3 RS-232 to 4800 bits per second
19:24:15 Elapsed time: 273 seconds
19:24:15 Ready
Of Dick Roth KA1OZ
Sent: Wednesday, May 07, 2008 2:49 AM
To: K3 Support
Cc: Elecraft Reflector
Subject: [Elecraft] Something happened behind my back!
My K3 will not turn on. It was semi-alive last night. When I press the
"Power" button, the power supply meter reads about 2 amps and i
ound the condition I mentioned above.
I'm not sure which direction to take, but I think I'll back off and
watch baseball before going through the schematics.
ttfn &
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come)
___
been here before and can give me a clue.
Thanks and good night!
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscribe
ceived only 3 out of 4 #4 fiber
washers and I was short 3 screws. All but the washer were in the Spares
Kit. I'll be letting support know if or when I hit a road block. So
far...I'm having a whole lot of fun developing pride of ownership.
Good Night &
--
73,
Dick ka1oz
Midd
The doorbell rang at noon straight up! A brown box greeted me as I
yelled something incoherent, but full of joy.
The radio was ordered on 11/22/08 and I received my Katiegram on 4/28.
The fun begins!
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 000859
Titan-DX (to come
Ordered 11/22/07
KRX3 and 1.8 kc filter are back ordered.
I am now in a race to erect my new Titan-DX vertical before the K3
arrives. I am psyched!!
--
73,
Dick ka1oz
Middleborough, MA
Breathlessly awaiting my K3 to bring me back on the air after 30 years
be nice if it were in there by
the time I get my K3 in April/May, in time for the ARRL VHF QSO Party in
June.
Bill W5WVO
Rio Rancho, NM (DM65)
{snip}
Bill, regarding the meaning of "release". I believe that to be a
version beginning "2.xx". The current release is 1.xx.
ve to Salem, NH.
tia.
--
73,
Dick ka1oz
Middleborough, MA
Calmly awaiting my K3 to bring me back on the air after 30 years.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. C
Thanks to all who pointed the way. This is a very helpful list! I'm
glad I've joined.
Happy Holidays to All
Don Wilhelm wrote:
Dick,
That is one purpose of the TEST mode see the Owner's Manual page 25.
73,
Don W3FPR
Dick Roth KA1OZ wrote:
Hi List--
In anticipation of
yer in the radio to learn and practice
proper paddle use?
--
73,
Dick ka1oz
Middleborough, MA
Calmly awaiting my K3 to bring me back on the air after 30 years.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post t
scribers.htm
Elecraft web page: http://www.elecraft.com
--
73,
Dick ka1oz
Calmly awaiting my K3 to bring me back on the air after 30 years.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
__
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
-
83 matches
Mail list logo