entirely. It didn't used to be there .. and I wonder
if it has been observed and trouble shotted in another system.
It doesn't seem to produce any noticable interference on the audio but it
does make it difficult to id signal on the spectral display.
73s
de
zl1any
--
Stephen Pearce
Cri
Any idea of price yet? Sorry if this is either premature or has already
been posted.
73 Stephen G4SJP
On 8 April 2014 22:43, Wayne Burdick wrote:
> Phase noise is quite low on 2 meters, since the LO for 2 meters is derived
> directly from the HF-6 meter synthesizer. We'll post m
the K3 to be a
wonderful rig to use on CW, but I'm no racer, and never will be!
73 Stephen G4SJP
K3 #980
On 13 April 2014 15:34, Phil Hystad wrote:
> Which brings another question --- just when should the QRQ be enabled. I
> have sent at 30 wpm and that is about the limit of my sendin
Pretty much anyone who contests or chases DX regularly on CW. The K3 is
quite popular with us. It really did a number on one of the W1AW/8 ops as I
recall.
73
Steve KL7SB
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of F5
This email reminded me of something ..I think I may have brought it up on the
Yahoo group but not on this reflector.
I have a K3 line at my home station ...and of course am a real fan. I am often
on the team at the KL7RA M/M station here. We have an ongoing (good natured)
dispute about whethe
Ooooh D4C ...nice ...one of the best contest teams in the world! ...now
THERE is a place I'd love to operate from sometime.
73
Steve KL7SB
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of I4UFH
Sent: Monday, April 14, 2014 1
Ditto. This is the first radio I"ve ever owned that comes with an opioniated
user community, no extra charge :) I also didn't know that D4C and W7RN had
K3s. There is an ongoing debate amongst long time top 25 type contesters (of
which I am not!) about the K3 for M/M. If the D4C level guys a
Jim:
Could you upload this as a file to the reflector?
73
Steve KL7SB
Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone
Original message
From: Jim Brown
Date: 04/14/2014 12:31 PM (GMT-09:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Contest Confi
I'll be honest with you, I've given up on the KX3 decode. It's ok, but not
great. I have the same issue with "R"...almost always displays as "EN".
On Apr 20, 2014, at 2:23 PM, HREFAB wrote:
> I am noticing that my KX3 has a very hard time actually decoding CW that is
> sent/received. I have tri
Hi Gary,
Yes, and it's curious that there are clearly better decoders out there. I built
an Open QRP rig last year and the decoder was phenomenal...much better than the
KX3, so assuming this is a software issue, is this something that the Elecraft
engineers are looking at?
73, Steve
-
where the other op is droning along parroting everything I sent,
sometimes the mind wanders and I cheat a bit and see if I can catch what he/she
is saying by glancing at the display. I knowI know
Steve, W1SFR
On Apr 21, 2014, at 10:11 AM, AG0N-3055 wrote:
> On Mon, 21 Apr 2014 09:32
Not exactly related to this but ...fwiw as someone fairly new to this
reflector ...
I'm just as interested in what people *do* with their Elecraft equipment as
well as how their experiences ..whether DX ..Contest ..EComm..VHF/UHF/EME
etc. using Elecraft equipment compare with experiences using oth
My response to the earlier posting was going to be ...this hobby has a ton
of different facets ...ragchewing is fine ...I'm just not that chatty in
real life to begin with ...let alone on the air ...Took to CW real quickly
because of that I guess ..
For some of us ...our interest is in what a lot
In the pursuit of truth, there is nothing wrong with being pedantic!
73 Stephen, G4SJP
On 25 April 2014 22:01, Gary Gregory wrote:
> Jim IS correct though and it would be preferable to use the correct term
> rather than those that are bandied around in conversations we hear on air
&
Yeah, apparently they prototyped a single tube (can't remember what the
final was) KPA-1500 years ago ..but never went anywhere with it. I have the
KPA500 and an Expert 2k-FA and they both play perfectly with the K3. The
KPA500 is about half the weight, a third the price, and much much quieter.
H
I have found this to be true as well.
73
Steve KL7SB
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Brown
Sent: Wednesday, May 07, 2014 6:33 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500 question
On 5/7/2014 7:15 AM, AG0N-30
One thought that I have had is breaking the list into two ..one that is
*directly* related to K3 operations and K3 technical / support issues and a
second that is ...everything else, with very light moderation. I actually
enjoy the tangents, to me half the fun is "the community" here, but
obviousl
Hope it isn't bad etiquette to send this to two email lists
I've thought that ExpertAmps and Elecraft should consider some type of
working agreement. I have a K3 and 2K-FA that play very well together .very
nice for QSK, though I did buy the amp with the after market vacuum relay),
pretty sim
I know this thread has been closed ...but ..couldn't resist this one ...So
far I'm happy with the 2K but realize that it, much like an earlier Italian
import could end up as a 7500 Dollar Fiat (Fix It Again Tony).
73
Steve KL7SB
-Original Message-
From: Elecraft [mailto:elecraft-boun...@
The QRP Works booth is now directly opposite Elecraft's booth in Dayton
The new Key Log Go product will connect to every Elecraft radio.
Steve Silverman KB3SII
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/ma
with
a front loading washing machine!
73 Stephen G4SJP
On 19 May 2014 14:44, Pete Smith N4ZR wrote:
> I sorta think the issue ought to be why *not* to use them. Don't I recall
> reading on one of the reflectors that heavy knobs may cause premature
> failure of the decoders due t
Good morning,
I believe it leaves it the mic bias on but turns off the compression. If
your using a signalink USB, you need to have the mic bias off UNLESS you
are using their prefab jumper board. If you're using their board, you can
leave mic bias on. If you're using wire jumpers, it needs to be
Greetings,
I too can not hear the nets at my QTH 50 miles south of San Francisco. Only
once did I hear a station down in Southern California who was able to relay
for me, but other than that, nada. I know it's not my antenna (okay maybe
it is a little) because I work and can hear other states and
'Mr Mark' sounds rather oriental to me
73 Stephen G4SJP
On 12 June 2013 07:38, Keith Heimbold wrote:
> Looks like a scam to me too.
>
> Sent from my iPhone please excuse typos
>
> On Jun 11, 2013, at 11:37 PM, "Scott Manthe"
> wrote:
>
> >
Greetings,
Thinking of picking up the W2 wattmeter to go in the shack with the rest of
my gear (and future K3 and KPA500some day). I was reading the reviews on
eham, but still had a few questions I didn't see there.
I was curious about the accuracy of the meter and how well the peak hold
func
Thanks for all the feed back! Looks like I'll be taking the 30 minute drive
to Watsonville this week.
Steve KS6PD
On Saturday, June 15, 2013, Donald Butler wrote:
> I have two W2 meters and I like them .. But I do not rely upon them for
> accurate power readings.. My more practical use is to us
The last batch of PP's I purchased were pre welded together, which is very
convenient. A spot of super glue also works well.
Steve
W1SFR
Sent from my iPad
On Jun 17, 2013, at 5:35 AM, "Fred Smith" wrote:
> When I first tried my hand at power poles they came apart as soon as I put
> them toget
Robert,
Off topic but...
I love your quote at the end of your email, "On the 8th day. God created
Amateur Radio and Baseball."
Read it to the xyl and she rolled her eyes and said that you forgot to add
"beer" to your lineHihi. Check out my QRZ page.
73,
Steve KS6PD
Kx3 #3604
On Saturd
Eric,
Sounds like you had a good time out there. I sent a few people your way who
are interested in getting into the hobby. Thanks for going out to Central
park and doing that. Maybe next year ill bring my KX3 and we can operate a
2B station.
73,
Steve KS6PD
KX3 #3604
P.s. are u familiar with
I had that same garbage power supply. Got rid of it and stuck it in the
garage to collect dust. It was causing all kind of noise in the shack. I
bought the alinco switching supply and have been very happy with it. I use
it primarily to power my TS-590. I like it because you can vary the voltage
bet
on to full rig control if that's what you want.
73 Stephen, G4SJP
On 29 June 2013 21:21, wrote:
> I am looking for a basic logging program for the iPad mini that I can use
> while I am portable.
>
> The basic logging program is my real want but I would like to hear of other
> p
Greetings,
Up in Lake Tahoe (DM09) right now with my KX3 set to 5 watts on 14.052
running real slow CW if anyone wants to see if they can hear me. 7/2/13
2005z
73,
Steve KS6PD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
near
> Salt Lake City. What antenna are you using?
>
> -Greg NY6C
>
>
> On Jul 2, 2013, at 2:06 PM, Stephen Selberg >
> wrote:
>
> > Greetings,
> >
> > Up in Lake Tahoe (DM09) right now with my KX3 set to 5 watts on 14.052
> > running real slow CW if
Hi John,
Yeah I was sending CQ de ks6pd/7 for about 10 min before my email and 5 min
after. Looked myself up on rbn and didn't see myself either. Maybe it means
I need to stick with wire antennas. Thought I'd bring this one up and give
it a test. Maybe later this evening will provide better resul
t meter in line to be sure there is RF going
> out . . .
>
> 73 de dave
> ab9ca/4
>
>
>
> On 7/2/13 3:44 PM, Stephen Selberg wrote:
>
>> Hi John,
>>
>> Yeah I was sending CQ de ks6pd/7 for about 10 min before my email and 5
>> min
>> after.
What kind of antenna(s) are you using? Different antennas for different
bands? Maybe check the connections. Just shooting from the hip during an
office meeting.
73,
Steve KS6PD
On Tuesday, July 9, 2013, Grant Youngman wrote:
> It could certainly be some anomaly with the radio, but here (Dallas
Hey, Rich:
I've used mine from several places on SSB, CW and RTTY. Flawless
performance! Used a THP HK-1.1fx before
the Elecraft.not flawless!!
73,
Steve AA4V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Guy,
I use the iPad and pigtail and it's great. I cannot recommend it too highly.
73 Stephen G4SJP
Full of typos from my iPhone
On 16 Jul 2013, at 11:04, gteague wrote:
> hi fred:
>
> yeah, i saw a youtube video of someone connecting to an ipad and i plan to
> do tha
its size, the built in
speaker in the k3 is disappointing and I don't use it.
73 Stephen G4SJP
Full of typos from my iPhone
On 19 Jul 2013, at 13:16, Trevor Dunne wrote:
> Hi All
>
> I am allmost ready to order my K3 but I keep reading about people that are
> unhappy
Hi Stephen,
I used my kx3 for jt65 once when I first got it to see how it would work. I
can't recall what the ALC looked like tho. I bought a special signalink USB
and the jumper board to store in my kx3 go case so i wouldn't have to
disconnect all the cabling in the shack with the main
l the
battery voltage has fallen well below 12V.
73 Stephen G4SJP
On Tuesday, 6 August 2013, Dominic Baines wrote:
> Arno,
>
> Sure someone from Elecraft will respond with a technical
> explanation...sounds a bit like default behaviour to me and also shows
> there is a difference in
Greetings,
I actually have one of those mighty fine junk 17 foot telescoping whips as
one of my few traveling antennas for the kx3. I think this weekend ill set
it up where the flag pole would go and give it a ride! I'll fire up the 590
(one day to be replaced by a K3) and see what happens. Don't
I must say, I'm glad this thread is out there. I'm in my mid 30's, and as
prior military and current law enforcement (thus the call) I have had my
fair share of "bangs" next to my ears. The xyl is already complaining about
my hearing, and I have to admit, my hearing isn't what it once was. I'm so
Greetings,
In my quest to find a low profile antenna, I've looked at a lot of
possibilities. I was curious if anyone has and experience with the MFJ 1786
loop antenna. It looks like it has decent reviews on eham. I can deal with
tuning it whenever I move the dial. I realize it's only rated to 150
Giving the high quality of Elecraft products, and the phenomenal customer
service, not to mention the made in the USA stamp, I think an Elecraft
2m/440 HT would be a huge success. I know I would be one of those people
camping out in front of the store for a week just be first in line to buy
one. Ho
t?
>
> This is not to say that something might happen way down the road, maybe a
> digital voice HT, whenever a true DV standard is reached.
> But, for now, I really do not believe Elecraft would consider marketing an
> HT.
>
> 73 de Ray
> K2ULR
> KX3 #211
>
>
> On
I think BND END only applies with the KX3 if you try to transmit _just_
below 28MHz :-)
73 Stephen G4SJP
On 20 August 2013 05:37, Mark Petiford wrote:
>
>
>
> - Forwarded Message -
> From: Mark Petiford
> To: Igor Sokolov
> Sent: Monday, August 19, 2013
I'm running hrd v6.1. If there's any one in the San Jose Ca area with a K3
I can plug the laptop into, maybe we can get an answer for you. What
buttons specifically are not working?
73,
Steve KS6PD
Kx3 #3604
On Sunday, September 1, 2013, Bill wrote:
> I use HRD about 95% of the time - an older
Lynn,
You haven't seen my KX3 thoughjust saying..
:)
73,
Steve KS6PD
On Tuesday, September 17, 2013, Lynn W. Taylor, WB6UUT wrote:
> We can't have a post without controversy can we?
>
> My KX3 is cooler.
>
> On 9/17/2013 8:05 AM, KQ8M wrote:
>
>> I love my K3!
>>
>>
>> That's a
Sorry no joy there Rick, but at least you had a nice day in the great outdoors.
My latest "adventure" was a QSO with a station in Japan on 20m yesterday (I'm
in VT with a KX3). I have to count countries, but after about a year and a half
of operating, I'm up to 150 or so. Still trying to reach t
Bill,
I've had a LOT of different keys and also settled on the Whiterook as a
knockabout QRP key. I think it's really an excellent key. Lots of fun to use as
a sideswiper too, and just a tad cheaper thanwell just about everything
other than a couple of nails in a plank and a hack saw blade!
eason for the delay in its implementation, but I would like this feature
enabled as soon as possible. One of the joys of the KX3 (and K3) is the
fact that the S meter is so accurate!
73 Stephen G4SJP
On 3 October 2013 01:01, robertsm...@vom.com wrote:
>
> I'm sure this questio
Same here, instructions read fine and Scott has confirmed despatch this
morning UK time!
73 Stephen G4SJP
On 3 October 2013 10:00, Dave wrote:
> Obviously everyone is different, but I could follow the written
> instructions OK.
>
> I'm now awaiting shipment from
I received mine today - I can fully recommend both the sides and the
cover. A quality job and looks like it was meant to be there in the first
place! Took about 5 minutes to fit.
73, Stephen G4SJP
On 9 October 2013 15:05, Peter Eijlander (PA0PJE) wrote:
> Me too:-)
>
> 73, Peter
Not wishing to take this thread too much offf course, but the dollar
equivalent cost of 1 kWh in the UK is about 24 cents US and soon about to
rise and we don't have the most expensive elecrical energy in Europe by a
long way. So I turn off whatever I can!
73 Stephen G4SJP
On 16 October
My Fluke 73 reads 4.3mA on the 300mA range and 40mA on the 10A range, which
just goes to show that you can't trust the reading on an instrument when
the 'full scale' value is so very much higher than the current that you are
trying to measure.
73 Stephen G4SJP
On 19 October 2
u, as I tell my students frequently!
73, Stephen G4SJP
On 19 October 2013 18:24, Ron D'Eau Claire wrote:
> Yes, that was my mistake (mentally moving the decimal point!)
>
> However, several others including me have measured a real parasitic drain
> of
> almost 40 mA (38 mA
Oliver,
My K3 goes down to 300Hz!
73 Stephen G4SJP
On 20 October 2013 18:43, Oliver Johns wrote:
> Hi Jim,
>
> My only gripe is that the K3 choice range doesn't go down to 400 Hz. I'd
> like to use 440, a pure standard A.
>
> 73,
>
> Oliver
> W6ODJ
&g
Greetings,
Please let the record note, I would sell all of my other radios and gear
before I ever let go of my kx3 and accessories go.
73,
Steve KS6PD
On Thursday, October 31, 2013, Fred Smith wrote:
> The numbers tell the real story about it they do not lie it is the #1 QRP
> radio in the wor
found
this? It doesn't do it all the time so is rather difficult to pin down.
I'm getting full power out without any problem.
Thanks for any advice,
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
Graham,
Elecraft did write, in an email a year or so back, that they might be
producing an adaptor which would allow the KX3 to work with the P3.
Whether it is still on the cards I don't know.
73 Stephen G4SJP
On 27 November 2013 13:53, Graham Pemberton G7NEH <
grahamp
Or you could get one of my stands which gets high marks from users.
http://kx3helper.com/kx3-helper/
73
Steve, W1SFR
Sent from my iPad
> On Nov 29, 2013, at 9:10 AM, "Fred Smith" wrote:
>
> The "Nifty Stand" is perfect for use with or without paddles. I'm a non-CW
> op and would not want one
Mine will drift a few minutes over a few weeks, but I do agree that 4200s
in one week points at a problem somewhere.
73 Stephen G4SJP
On 2 December 2013 03:39, Mike Morrow wrote:
>
> > After setting the clock accurately last weekend, I did not think
> > about checking it this w
l,
without me touching anything else such as the VFO. It's as if a buffer
which is much bigger than the screen data is being flushed, leaving no
history in the waterfall at all.
I can't imagine myself being without the P3 now, however!
73 Stephen G4SJP
On 4 December 2013 02:20, Larry B
Yes, a proper crimp is important especially if you're using smaller ga wire. If
that's the case folding the wire over enough that it fills the connector is a
good idea, then a good healthy crimp. If the connection will not suffer any
repeated flexings, I also solder mine just to make sure when w
buying the PR6-10 as I'm about to take deliver of a KPA500!
73 Stephen G4SJP
On 10 December 2013 09:20, Ray G3XLG wrote:
> Hi All
> I am thinking of buying this accessory but I am a bit confused.!
> I use a 4-El SteppIR beam for the HF bands as both my receive & transmit
&g
Interesting, I push the wrong button first *every* time :-)
Despite that, I have to say that it is by far and away the most useful bit
of test gear (apart from a multimeter and a scope) that I have ever owned!
73, Stephen G4SJP
(anxiously awaiting the arrival of the man in the brown van with the
l-shielded, but wonder if anyone else has experienced this problem?
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
Rather red faced about this - but it looks as if my contact spacing on the
Begali Expedition was set far too narrow! Having cleaned and reset the
key, all seems well.
73 Stephen G4SJP
On 15 December 2013 20:43, Stephen Prior wrote:
> Occasionally, at 100W I get the internal keyer locking
Dear Santa,
Please bring me a KPA500 for Christmas! Thanks...
Merry Christmas and happy holidays to everyone on the list!
73,
Steve KS6PD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mail
s, I would
hope that the decoded data will be available on the P3 _without_ the need
to purchase the SVGA card. And, of course, we are also looking forward to
being able to connect a USB keyboard directly to the P3 in order to
transmit data/cw too!
Not asking too much I hope.....
7
Well the same current should flow in both positive and negative leads, so I
would go for 25A.
73 Stephen G4SJP
On 12 March 2012 22:26, N8CEP wrote:
> While on the subject of fuses, what do you think would be a appropriate
> size
> for fusing both positive and negative leads for
enjoy
a (even if small) reduction in shipping cost. Some of you in the USA and
Canada would I expect be horrified by how much we have to pay for shipping,
and I'm not blaming Elecraft here of course.
73 Stephen G4SJP
On 28 March 2012 12:59, Paul Lamhut wrote:
>
> For kit deliveries I
It looks to me like it came a poor third (out of three entries) in a club
construction competition! Surely it's not for real?
73 Stephen G4SJP
On 13 April 2012 18:25, Keith Heimbold wrote:
> No 6m, shame on them. By the look of it I would say very hard to even make
> a comparison
Thanks Wayne, that was great!
73 Stephen G4SJP
On Friday, 13 April 2012, Wayne Burdick wrote:
> Fred Jensen wrote:
>
> > Retro Encabulator
>
> This is about as OT as it gets, folks, but in case you missed it,
> here's the video:
>
> Rockwell Retro Encabulator
Hi folks,
I'm waiting for my K2 to arrive in a couple of days and was wondering if there
are any instructional videos that cover all the functions of the K2.
Steve
W1SFR
---
Steve Roberts
(802) 779-7489
___
check this out wow http://www.nb15news.net/biz/?page=0369967
~*Advertisement
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Well, just got my pre built K2 and I'm looking for recommendations for external
in line fuse as well as power supply. I recently fried my OHR rig and will not
power up any of my rigs without the proper fuse again.
I currently have an inline 1A fuse with PP connectors and a 2.4A power supply.
Wi
Bill
If you install Lpbridge which is a port sharing utility which sits between
the K3 and up to 5 applications wanting to communicate with the radio, then
the problem will disappear! It looks daunting to set up, but in reality
it's easy. Problem solved!
73 Stephen G4SJP
On 30 April 20
This may be a really silly impractical idea, but could not the I/Q output
socket be selected in setup to be either line audio out or I/Q?
73 Stephen G4SJP
On 1 May 2012 10:17, Peter wrote:
> Wayne
>
> With all the digital modes popping up and audio recording it will be
> nice if
Well going from a rather ancient Ten Tec to a K2 has been a real treat for
sure, and as most of us can't seem to be able to leave anything well enough
alone, I was thinking about possible options I can add without breaking the
bank. Can any of you folks tell me the real life difference between t
Arghh, not available in Europe! Rights restrictions... Would have been
ideal for one of my physics classes tomorrow.
73 Stephen G4SJP
On 3 May 2012 20:24, Bob wrote:
> Off Topic I know, but this is too good not to share with my fellow
> Elecrafters as we head toward the peak of Solar
points as Jussi
has written.
If I can find the source, I will post a link to it.
73 Stephen G4SJP
On 4 May 2012 20:02, Jussi Eloranta wrote:
> On 05/03/2012 10:10 PM, Erik Basilier wrote:
> > The May 2012 issue of the IEEE Spectrum magazine reports that
> researchers in
> > Ita
tle confused by
what should happen, and when. For example presumably I should only hit
reply (or whatever) during the decode period, so I have to be pretty quick?
Perhaps it's just advancing years...
73 Stephen G4SJP
On 4 May 2012 17:44, Jim Brown wrote:
> On 5/4/2012 8:25 AM, Robert
I'd like to keep both keys plugged into the K2 at the same time. How should I
go about that?
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mail
for software that I believe offers value for
money.
73 Stephen G4SJP
On 9 May 2012 21:47, Keith Heimbold wrote:
> I just uploaded the new HRD and it has very few controls for the K3. In
> comparison, I had before a FT950 and it had probably fifty plus slider bar
> options. It worked
noisy
environments. Even a campsite can be very noisy with the inverters from RVs
and the like spewing out rf everywhere.
I'm spoilt for choice of antennas to play with once the KX3 arrives!
73 Stephen G4SJP
On Wednesday, 9 May 2012, Fred Jensen wrote:
> I haven't been following this
running the monitor and then later the K3
off the still connected SLA battery! The K3 was still receiving fine at
the reduced voltage (my low voltage is set at 11V), but the 232 port
clearly was not.
Panic over, but only after an hour of fretting! I must be going senile.
73 Stephen G4SJP
. In NZ I never really did get the hang of directions and came to the
conclusion that it was because the sun was in the wrong place.
73 Stephen G4SJP
On Thursday, 10 May 2012, N5GE wrote:
>
> Polarized glasses cannot reduce glare reflected from chrome, or any other
> smooth
> metal obj
I just got a K2 and want to hook it up to my logging software on my iMac. What
do I need to do that?
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
That's good news Alan, I've been looking forward to that. I have no room
on my desk for another monitor.
73 Stephen G4SJP
On Tuesday, 22 May 2012, Alan Bloom wrote:
> Yes, that's the plan. Probably we'll get it working on the SVGA first
> then the P3 display later.
n etc.
73 Stephen G4SJP
On 22 May 2012 20:33, David Gilbert wrote:
>
> I would heavily discount anything that person told you in the future
> because they clearly don't understand how that works. When you run
> Windows on a MAC you are doing it in a separate partition of th
I'm going to be installing a KIO2 interface into my K2 shortly, but have a
basic question. Is there a way to make the cable USB? I mean...who uses RS232
or Serial interfaces anymore? I'm assuming I will need an adapter of some sort.
Recommendations?
73
Steve
--
I whole-heartedly agree. If exclusive it would be a slippery slope for
Elecraft.
73 Stephen G4SJP
On 29 May 2012 11:13, David Cutter wrote:
> I expect $ prices to appear as £. I'd rather deal direct, certainly on
> high-value items.
>
> David
> G3UNA
>
>
> On 29/
the
US appears to discourage buying anything 'in state'.
73 Stephen G4SJP
On 30 May 2012 22:01, Geoffrey Downs wrote:
> Dear Kent,
>
> Internet sales are not tax free in the UK. Nor, I believe, in the rest of
> the EU. We do not have local sales taxes in the UK but we
I just completed my KAF2 audio filter and installed it. All is well...BUT I'm
not able to set the clock and the date. The display works and I get the default
numbers for both date and time, but when I tap the band buttons nothing
happens. Everything else functions correctly.
Steve
-
I'm about to venture into this but don't know what to expect. How does the
program interact with the K2 and what is the process/input during a QSO? Is it
all worth it?
I have the kit and the USB cable from Elecraft, and I'm about to build the
critter.
73
Steve
--
confirmation or revised invoice as yet. I'm trying to be patient, not easy
:-)
I ordered 6 hours in from t=0 so it's getting close I hope!
73 Stephen G4SJP
On Thursday, 7 June 2012, David Perrin wrote:
> Hi-
> I placed an internet order for a " bare bones" KX3 kit about a w
Is there a thread that looks at options for external amps for the K2? If I use
an external amp, do I also need an external tuner? I want to get an amp, and
getting the internal amp seems like the most sensible way to go, but I'm also
thinking that an external amp I could use for other radios in
I'm waiting for a KAT100 amp to be delivered for my K2. For now I'm using a 40m
end fed LNR antenna so bypassing the ATU at 100W should be no problem, but I
plan to hang a new Buckmaster OCF 7 band antenna, and can't seem to locate the
power limits of the internal K2 ATU. Do I have to get an ext
401 - 500 of 1097 matches
Mail list logo