Is This A K4 Problem??
THIS was on the FSARC email server today...
"From Steve Waterman, the WL2K guru, that fully software-defined radios,
like Flex, have had handshaking timing issues with VARA, and with SCS
Pactor modems.
Flex and SCS have firmware upgrades to improve handshaking speed
to ship
these orders. After that you will start to see the the order date that we
are shipping change much more quickly.
On Mon, Apr 26, 2021 at 1:24 PM stephen shearer
wrote:
Bill,
Group one was still taking orders at the beginning of 2020 (January at
least).
I placed my group one order before
Bill,
Group one was still taking orders at the beginning of 2020 (January at
least).
I placed my group one order before Thanksgiving 2019.
I suspect (hope) most of the group one orders were placed during the
Hamvention ??
I upgraded my order from a K4 to a K4D before Easter 2020 (no problem -
Yes, BUT For the 2KW Honda, how long do you want it to run???
SEE "long Run Kits"
https://www.amazon.com/Bergs-System-HND1-2000IS-Single-Tank/dp/B07K385YGX/ref=sr_1_2?dchild=1=honda+generator+extended+run+kit=1618178399=8-2
You can also find the parts to make the kit and modify a "cheap"
Don, (good keyboard copy) 599 here... has many of the mails gone to
elecraft-K4 and elecraft-KX3 ?? I personally "killed" my -K4 account,
too much junk guessing when their K4 will be delivered... and did
"someone" really say "by the end of May?"
73, steve WB3LGC
On 4/9/21 11:49 AM, Don
OK, I tried...
Can I set up the internal PSK31 for split?
I tried, the best I could do is RIT.
It would be nice to TX and have split to tune RX.
PSK31 works, but is touchy. It would be nice to leave the TX freq alone
(so the other station doesn't have to chase you) as you move the RX freq
OK, yes - put it on the "to do" list...
I have had the "same" issue with my KX3. Adjusting the TX EQ, CMP, and
Mike gain.
See:
https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/
OK, I would like to see for the K4, a built-in APP that will
See: https://gemsproducts.com/product/kxpa100-mount/ and the bracket
comes with screws.
BTW, 10-32 is what is needed (the manual is wrong)
73, steve WB3LGC
On 3/31/21 9:46 PM, KENT HUFFORD wrote:
I have a KXPA100 amp. I am trying to mount it. The manual says - "The
bushings are threaded
"Group 1, done by May" ?? Would be nice. I am not going to hold my
breath. The few (2?), "I got a UPS package", were from orders entered
the first day. Group 1 was not closed until Jan 2020??
"I Think" some of the communications from Elecraft are "hung up" with
the Ferengi print from the
OK, I own a KX3/PX3 and have a K4 on order.
I like my KX3/PX3 and I am looking forward to having a K4 with the K-POD.
I "see" the K-POD more as a remote KNOB.
What I do like with PX3 is the ability to use the programmable keyboard
function keys (or any key you program) to either provide a
The picture was rejected. Not a problem. See if the point is said
without the "extra" 1000 words... steve
On 2/18/21 8:58 PM, stephen shearer wrote:
I have seen a difference in low end (audio bandpass) performance in
the past, it was not a problem.
I use DATA for FT8.
Mike,
Good idea.
Looking at HDMI capture "cards" - I found many on Amazon and a number
had audio I/O, too.
Meaning... A Zoom meeting, video and audio from the K4 as a training
"session" for FD...
(say it four times! "we will have a K4 for FD...)
I can also "see" HDMI & K4 as a group demo
It looks to me...
For the last few years (since 2019 ???) that the Handbook now comes in
three versions. softcover @ $50, eBook @ $50, and "boxed" set @ $60
(with download included)...
Yes, I too liked the softcover with the CD/DVD included... It has been
a few years since I purchased
On the subject of RED LED Headlamps, I have a Energizer - it has two red
LED's + three white (variable brightness) that cam be selected. I
picked it up at Walmart a few years back. It was in the $10 - $20
range, I think it was $13.. (cost may be more now). 3xAAA batteries. I
don't find a
OK, the manual says #8-32 no deeper than 1/8" into case... (page 10)
NOT true, my KXPA100 takes #10-32... SO, is the depth into the case
1/8" or do I have more??? bigger screw??
Yes, still 32 TPI...
Help. so I don't screw it up. Pun intended.
Steve WB3LGC
Me too.
I only find the AA's useful in keeping the clock running.
steve WB3LGC
On 10/6/20 8:32 AM, w...@jetbroadband.com wrote:
I would buy it.
Jerry, W1IE
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Steve KC6ZKT
Sent: Monday, October 5, 2020 17:47 PM
To:
Terry,
I am most likely at the end of the group, too.
I originally ordered a K4.
I change the order this past spring, to the K4D.
I "don't need" a K4, even. I have great fun wit a KX3 + PX3 + KXPA100...
I wanted a home station so that the KX3 was my portable station.
I looked at the "D" upgrade
I use Thunderbird for my email.
I filter almost everything into one folder or another. Works great
I filter[Elecraft] and {Elecraft-K4] with any K4 "stuff" in the subject
line, into a K4 folder. *It could just as easily go into the trash...*
Thunderbird does this automatically about every 10
https://www.digikey.com/product-detail/en/cui-devices/SJ1-43502PM/CP-SJ1-43502PM-ND/5130707
It may not be correct, but IF sizes use "standard" nuts... M7x0.75 ?
someplace to start?
73, steve
On 8/28/20 7:24 PM, Rich NE1EE wrote:
It is easy to cross thread nuts and screws this way. IME,
OK, what is the group name? Elecraft-K4 ??
https://groups.io/g/Elecraft-K4 already exists, since (at least)
November
73, steve
On 8/28/20 6:33 AM, Alan - G4GNX wrote:
Someone on another group suggested that there should be a group setup
specifically for the K4.
I responded by doing
Nice install.
I took the GEM mounts and plywood one more step. I used a ~12" round
3/4" plywood disk and mounted three RAM mounts;
https://www.rammount.com/ . KX3, PX3 and Plastic "box". The box can
hold audio ADC and CAT control or for picnic table OP's, and antenna. I
am able to adjust
He did answer the big Q in the Q/A after the scheduled talk. Start
shipping late August. Quote: “We are still targeting first K4
Shipments by the end of August, with production ramping up in September
through year end. Please be patient during this period as we navigate
both supply chain
I AM SURE...
When the first K4 is in the hands of users, that there will be a
"flurry" of YouTube un-boxing videos. I am sure the how-to videos will
follow.
73, steve WB3LGC
On 8/4/20 3:47 AM, turnbull wrote:
Gary makes a good suggestion. TenTec use to have a CD which accompanied the
> Wayne
> N6KR
>
>
>> On May 8, 2020, at 8:38 AM, stephen shearer
wrote:
>>
>> Wayne,
>>
>> Speaking of the KAT500, KPA500, and the K4...
>>
>> Are there plans to combine the KAT500 and KPA500 into one box
matching the K4 ??
>> It
Ground loops can be another issue.
I was having a "feed back" issue with my KX3/KXPA100 ans solved it
eliminating ground/power loops.
73, steve WB3LGC
On 6/1/20 8:25 AM, David Olean wrote:
Hello Peter
I suspect RFI as well. I do not have a KPA1500, so my advice is not
worth much, but the
Also see XLOG
73, steve WB3LGC
On 5/25/20 10:57 AM, Bill Frantz wrote:
Does anyone know of good logging software for linux?
73 Bill AE6JV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
"To be listed as Class A, all contacts must be
made with transmitter(s) and receiver(s) operating independent of
commercial power mains."
IN the past... I DO remember that IF a computer was used for logging it
could be on "mains". Time was ... computers didn't control the rig
while
I don't quite understand the "HC4 doesn't work with a KX3" ???
I have a Heil headset with the HC4 element and it works fine...
YES, bias must be off as also "mic button"...
YES, mike gain will need to be higher.
Since the HC4 has a 2K boost, the TX EQ gain (see:
I purchased a Heil Prpset about the same time 2010+/- and they were
leaving "black bits" around too. Yes, the Heil is more expensive. I
was able to purchase new foam from the DC Store. I searched HRO and
they had stock, if you knew the part number. I now have a new
Headset... I DO like
-on-elecraft-kx3/
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
On Apr 23, 2020, at 3:30 PM, stephen shearer wrote:
They DO... http://www.dxstore.com/heil_acc.html (or HRO has them too)...
AD-1KX3 Adapter for Elecraft KX3, 1/8in TRRS$21.95
an ad
They DO... http://www.dxstore.com/heil_acc.html (or HRO has them too)...
AD-1KX3 Adapter for Elecraft KX3, 1/8in TRRS$21.95
an adapter, anyway.
73, Steve WB3LGC
On 4/23/20 5:55 PM, Nr4c wrote:
If your Heil mic has a Dynamic element be sure and turn OFF the Bias.
*I’d like to
Try: https://www.americanmorse.com/minib.htm
WB3LGC
On 3/17/20 12:48 PM, Eddy Avila wrote:
Does Elecraft plan on selling a single lever paddle or KX2/3? I have the
QRPguys single lever paddle and it's ok.
tnx and 73
k6sdw
__
I use KX3 for wsjt-x and JS8Call. I just connect the KX3 audio
(headphone jack) to the USB sound card. I use the waterfall to "hear"
what is going on and I like the quiet. I have not noticed hum. I have
a few snap on toroids on the audio lines in case. I use 12" audio
cables from the KX3
As I wait for my K4D… I just upgraded from a K4 and added a K-Pod as the
Easter Bunny and I decided it may not be delivered until after Easter
(early Apr) anyway. So, I am in a planning stage.
BTW, the upgrade was easy. I sent an electronic message to Sales and
Madelyn Gomez emailed me back
YES,
I am using a KX3. I use the "bar" on the right and set 20db of
attenuation in the audio drive "chain".
Mike gain is now set at aprox 40, rather than 3-4 (one step makes a BIG
step)...
I can set "ALC" correctly.
73, steve WB3LGC
On 2/2/20 7:20 PM, AL7CR wrote:
An absolutely classic
One of the software projects I worked on... The lead eng reported it
will be done in two weeks, for about six weeks. Then WE looked at
what/how we were doing the job and took a different approach. it WAS
done in two weeks, but needed six weeks of data (micro code) entry. An
intern did the
OK, I am most likely late to the discussion...
Yes, it would be nice to have all the software under the hood. But, I
know I am going to need a computer for Fldigi, wsjt-x, and js8call. So I
might as well add skimmer there (if I want it) too. I don't use skimmer
now. I like contests but I
Walter,
Someone did comment (maybe a different thread/group) about reading
Scouter and Boys Life at the barber shop and noted that ARRL has NO ads
about radio in the mags. He or someone else noted that SWL mags have no
ARRL ads, either...
I think ARRL has "missed the boat"...
ARRL has
See: https://www.youtube.com/watch?v=8x6x_6mDVlQ from the RSGB in UK.
See all the YOUTH...
ARRL has missed the "boat"...
73, steve WB3LGC
On 12/23/19 6:24 PM, Fred Jensen wrote:
Hmmm ... the 2018 Annual Report is on the ARRL site and it contains
membership data thru the end of that year. At
ions, so don't expect anything like a PC or other general
purpose computer.
You will be able to download firmware updates, but I don't know if a
separate PC will be required - I expect it will, so don't throw out
your shack computer.
73,
Don W3FPR
On 12/21/2019 12:26 PM, stephen shearer wrote:
OK, Ja
OK, January is fine as it's only 10+ days away... AND yes, Jan 31st is
only 5+ weeks.
(Joe, I bet as a kid you had no problem waiting for your gifts at
Christmas or other big holidays...)
what I am waiting for is the manual. It will/should answer many of my
questions.
Maybe before the K4 is
A VERY good video. I use it with Scouts as my intro into JOTA (Jamboree
on the Air) for the past few years. Professionally done. If is fast
paced it does SHOW youth doing RADIO and it keeps the interest as it is
only six minutes long a very very good video.
73, steve WB3LGC
On
Kent, you didn't find the "correct" issue of Scouting, as JOTA is
advertised every year as is K2BSA at the National Jamboree every four
years. See: https://www.scouting.org/jota/
73, steve WB3LGC
On 12/16/19 4:20 PM, K9ZTV wrote:
Went to the barber shop this morning. Wide assortment of
Don't forget the east coast "National Radio Quiet Zone (NRQZ)"... I
have a star party (https://www.ahsp.org/, on my list of things to do)
and I checked on the use of HF radio in the zone. Unless I was looking
at the wrong place, you can use radio in the zone unless you are at the
telescopes
YES, on my KX3.. I have seen (when I change modes, often) that I have
zero ALC (not 4/5 bars). IF I turn the mike gain up, still zero. AT
THIS POINT, I turn the mike gain to zero and start turning it up. The
mike gain was too high and starting over works... FT8 is working
again. I also
s all up to date firmware wise (the previous owner says) but I'm sure
one day I'm going to want to connect things to my PC.
Best regards and happy holidays
Joe ve3vxo
*From:* elecraft-boun...@mailman.qth.net
on behalf of
On Nov 27, 2019, at 12:38 PM, stephen shearer wrote:
Yes, that would be nice...
What I want to see (for ALL) utilities is the ability to load into Linux
without having to compile the utility (I understand .deb files)
Many Linux users are NOT geeks. I just wanted to get away from W10...
Yes, that would be nice...
What I want to see (for ALL) utilities is the ability to load into Linux
without having to compile the utility (I understand .deb files)
Many Linux users are NOT geeks. I just wanted to get away from W10...
OR have good directions on how to load into the most
I use a "Sound Blaster" USB card. $40 works with W10 and Linux.
https://www.amazon.com/Creative-Sound-Blaster-System-SB1290/dp/B0044DEDC0?SubscriptionId=AKIAILSHYYTFIVPWUY6Q=duckduckgo-d-20=xm2=2025=165953=B0044DEDC0
73, steve WB3LGC
On 5/22/19 3:16 PM, rich hurd WC3T wrote:
I've tried to use
Maybe the "powered by ICOM" has something to do with it???
steve WB3LGC/NR3I
On 10/3/2018 11:23 AM, Nr4c wrote:
A rather useless survey. Nowhere to enter model, only manufacture. Not aware
Beofeng made an HF radio.
Very disappointed.
Sent from my iPhone
...nr4c. bill
shifting it to 150 to 3150 Hz. It will
work fine for most soundcard data modes.
The K3/K3S has the same behavior, but it is not a problem.
73,
Don W3FPR
On 3/7/2018 11:47 AM, Stephen Shearer wrote:
8. My KX3 with "Data A" has a wide bandpass of 400Hz to 3500Hz and
sh
1. I had fun.
2. I read the Guide before, during, and after the test.
3. I started to 20m and was confused. Partly because I was not
hearing the FOX and was seeing stations below 1K with "R-12" reports.
4. On 20m, it did not help that XE1GK was calling CQ on top of W1/KH7Z
+/- 1HZ
You might want to try the [wsjtgroup] on Yahoo... too.
73, steve WB3LGC
On 2/26/2018 6:49 PM, Richard wrote:
I found this little text file in WSJT-X’s log directory.
In case the file itself doesn’t go through, here’s the text, I hope:
Name Time Frac dTime
rd drive and partitioned with the
first partition being a small fat32 partition with the firmware cab
file and it worked great.
If you try this and it works, please let us know.
72 - john - n0hj
On 2/25/2018 7:19 AM, Stephen Shearer wrote:
Yes, not class 10 takes longer... My thum
not class 10. You can
format to FAT32 in your desktop or laptop.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On
Behalf Of Vic Rosenthal
Sent: Saturday, February 24, 2018 10:38 AM
To: Stephen Shearer <sm.shea
It isn't a problem of file name.. The PX3 won't see the new thumb
drives. It reads the OLD drive just fine. I don't have a problem with
the name as I edit with the contest name in the filename and then
copy/edit to the one the PX3 reads. works great, except 16G drives - no
go. 73
I have read, tried, and still can't use a "modern" thumb drive (USB)...
with my PX3 for data transfer.
I have an OLD thumb drive that works in my PX3 firmware 1.48...
I have a Targus.com M-Sys DiskOnKey 128M formatted as FAT32 that works.
(yes, 128 mega...)
I have a San Disk Ultra Fit FAT32
I also found (sometime back for the same function)
http://www.visualgps.net/#nmeatime2-content ~$20 but neat extras
I am currently using "GPS Time" I purchased years ago for JT65
portable/mobile for $10 - now out of business?
Thanks for the other links...
steve WB3LGC
On 10/28/2017 8:04
BTW...
http://www.sotabeams.co.uk/compact-light-weight-10-m-30-ft-mast/ is
cheaper from UK than US. $63 + $30 (shipping - tracked) = ~$93
http://shop.packtenna.com/Masts-Supports_c_12.html $89 + $20 (shipping)...
73, steve WB3LGC
On 4/2/2017 4:25 PM, Michael Aust wrote:
Can Anyone
http://shop.packtenna.com/Masts-Supports_c_12.html
73, steve
On 4/2/2017 4:25 PM, Michael Aust wrote:
Can Anyone recommended a great QRP Antenna for KX3
Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches
that is lightweight, easy to deploy, carry on Airlines or packed
http://www.sotabeams.co.uk/compact-light-weight-10-m-30-ft-mast/
On 4/2/2017 4:25 PM, Michael Aust wrote:
Can Anyone recommended a great QRP Antenna for KX3
Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches
that is lightweight, easy to deploy, carry on Airlines or packed
My plan is to operate QRPTTF... YES, digital would be nice, too. SSB
for sure.
I seem to always have conflicts with other events. This year is no
different as DE Hamfest is the same day.
I have not decided what river I will operate from, yet. Delaware,
Brandywine, Red Clay, White Clay
I got away from KComm because it hasn't been updated since 2013. I
found fldigi to work better and is updated often. I will use N3FJP's
http://www.n3fjp.com/fieldday.html for FD. I use N1MM for other
contests, too.
steve WB3LGC
On 22-Jun-16 2:04 AM, Peter D. Vouvounas wrote:
If any of
I have used a G5RV (+/- 51') with ladder line using teflon 24ga silver
plated wire.
also see http://udel.edu/~mm/ham/randomWire/ ... I am working on a 9:1
and looking at the web site, a 70' wire should work fine for 80m...
73 steve WB3LGC
On 15-Mar-16 12:59 PM, Bruce Nourish wrote:
Hi
I played for a few hours Friday night.
I used my KX3 with the PX3 and a USB keyboard for S calling and reply
including the serial number using function keys. I used logging to keep
track of the few contacts I made on a separate computer.
I operated on 80m and used FSK D on the KX3 to
OK, Trying to use KX3/PX3 with FSK D for the RTTY contest. I started
with MCU 2.38 DSP 1.37 then went back to 2.37/1.33.
20m decodes. 40m does not work (REV is ON and can not be changed) Both
versions. I don't remember ever seeing RTTY change like Side Band to
USB/LSB ??
I guess I can
Be careful. Not all LED's are the same.
Early on I purchased a cheap two-pack at HomeDepot.
Later I was using brand name. I started to have some noise problems -
the cheap no-names were causing problems. I am almost all LED's now.
I started because my YL could hear the CFL power supply
I use a WELLER SOLDERING STATION -- MODEL WTCPN 60 watt
BUT my REAL recommendation is to get Kester 62, 36, 2 Sn, Pb, Ag solder.
It can be had in 1# AND smaller packs. It DOES a great job. The 2%
silver is what makes it work super...
73, Steve WB3LGC
On 24-Jan-16 4:04 PM, Reuben Popp
into that bug about a month ago. Dick Dievendorff sent me to elecraft.com
to get a new version with the fix. You want to find version 1.15.8.18, bottom
of the page.
http://www.elecraft.com/K3/k3_software.htm
R,
Al W6LX
From: Stephen Shearer <sm.shearer...@gmail.
V 1.4.9.29 Win10
OK, it reads and writes from my KX3.
I can open/save from/to disk.
I can copy/cut from the data but can't paste.
Am I doing something wrong?
Steve WB3LGC
__
Elecraft mailing list
Home:
Sounds great. It should work. I know I need to practice...
I have another problem
How do I put this... Sloppy sending?
I notice (particularly in contests) that many ops run the characters
together. I can't copy and my KX3 can't copy. Good keyers add the
proper spacing between
I take the answers you got one step further. Yes, I use the control COM
port for PTT. Yes, you need to change the mike functions (buttons/PTT).
I also use an "extra" USB sound card for the radio audio I/O so that
the system sounds still can come from the computer. Some digital mode
with the added PX3 macro (and text) capability, I have added the
following to my PX3.
20mPSK31 FA0001407;MD6;DT3;BW0025;MG025;GT004;#SPN40;#FXT1;
20mCW FA00014061000;MD3;BW0010;#SPN000100;#FXT1;
20mRTTY FA00014085000;MD6;DT2;BW0025;#SPN40;#FXT1;
73, steve WB3LGC
On 12-Nov-15 6:56
Try turning the computer on first and don't sleep.
If you had to re-load W7, why not load W10?
In digital modes, I don't let the screen or computer sleep...
73, Steve WB3LGC
On 12-Nov-15 10:05 AM, John Lawrence via Elecraft wrote:
I have recently had to reform my C drive and reload Windows
I would agree... I crimp most every thing now. The cost of GOOD crimp
tools are reasonable priced...
BUT, a year or two ago, I found crimp lugs I was using on my ladderline
were making intermittent connections and I was having a difficult time
finding the problem.
The crimp was not
I guess I need to read the rules...
Are they for real?
I "was" thinking of running portable KX3 on just 40m in my spare time on
a boy scout weekend as cook staff for the Cub Scout Family camping
weekend. After looking at the QRP scores from last year, one qrp op won
with 1,2, 3 for many
:
Steve,
Real the requirements carefully ---
Unless you are competing for the top positions, do not worry about it.
Running portable on just 40 meters in your spare time is not likely to
generate a score that will rank in the top 3.
73,
Don W3FPR
On 10/19/2015 5:54 PM, Stephen Shearer wrote:
I guess
Paul, GREAT...
I was doing a JOTA {Scout Jamboree on the Air} demo this weekend and the
keyboard/PX3 worked as my digital demo. I got an opportunity to play
CW, PSK, and RTTY. I really like the way you define the keys, allows
for more than just function keys! (seeing how you have 50
from some reading I have done recently, D-star is an open source from
Japan ham community.
I agree, if it's not open, it's not ham radio.
We use FM on 10, 6, and 2 - modes included in the KX3/K3s, maybe the
future should include d-star.
73, steve WB3LGC
On 17-Sep-15 9:28 PM, Don Wilhelm
I can't speak for the K3, but my KX3 only tunes when I ask (push a
button) but my LDG is an auto tuner. I DO have a LDG AT-200 on my
Orion. I had another brand z 125 watt tuner and it fried when I ran
RTTY at 100 watts. I switched to the LDG and it does take the power.
After digging (much
Thank you for the info.
I am still thinking about SideKar.
1) cost - it may need to be a Christmas gift - it exceeds my max per
item spending limit without approval.
2) Elecraft - what are they "going" to do with the keyboard on the PX3
and more important, SideKar is stuck with the DSP
81 matches
Mail list logo