Andy,
I did not see any response on the reflector, so I will try.
First of all, you need a soundcard. If you have installed the KIO3B in
that K3, there is an internal soundcard in the K3 that can e used.
If the KIO3 has not been upgraded, you will need a soundcard external to
the K3. Either
I've really been enjoying my new used K3. I installed the KPA3A in it and have
been very active on the CW bands.
My question is this. I can't get psk 31 to work in my HRD...either in
conjunction with Win4k3 or by itself. It works fine with Win4K3 by itself but I
want the nice HRD waterfall
Got it Don, yes the paper was written by Brandon.
thanks much and HNY to you.
73 Dwight NS9I
On 12/29/2015 6:56 PM, Don Wilhelm wrote:
Dwight,
I don't have experience with Remote Rig, and Brandon's suggestions
usurp mine. One thing I know is that if you are using USB mode
instead of DATA
Thanks foTalked with Elecraft and they sent me a paper on setting up the
different modes for the K3/0. One thing I was doing wrong was using Data
A when they recommend USB. Seems to be okay now with some more signal
reports.
HNY to all 73 de NS9I Dwight
On 12/29/2015 5:03 PM, Don Wilhelm
Dwight,
I don't have experience with Remote Rig, and Brandon's suggestions usurp
mine. One thing I know is that if you are using USB mode instead of
DATA A, you will have to set compression to zero and set the TX EQ to
flat. Failure to do that will result in distorted data transmissions.
Dwight,
You have the audio level set correctly if you are getting 4 bars on the
ALC meter with the 5th one flickering at times.
Are you using DATA A mode? If you are using USB mode, you must manually
turn off compression and set the equalizer flat. Using DATA A does that
automatically.
I'm using a new K3/0 mini and the remoteRig boxes to remote my K3.
I'm getting reports of my PSK looking like I'm over driving it.
I have my laptop soundcard level set down to 10 as recommended by
Brandon. When xmtg I set the ALC level to 4 with 5th flickering or even
just 4. If I go any
Happy Xmas guys and a healthy and prosperous New Year to all.
I am
a recent convert to the K3 with model 6990.
I am primarily a data mode operator (PSK31 etc. etc.) and my
K3 has the 2.8KHz and 250Hz 8 pole filters fitted and let me say its doing a
very fine job too. I use HRD version 5 which
My question is that I would like to be able to simultaneously decode
more than 2.8KHz (HRD is limited to 3.9KHz) of the ham band at once.
I have thought about fitting the 6KHz AM filter (there not being a
4KHz filter available). One part of me says that would work just
fine and the other part
Rich,
Yes, I have RTTY working in AFSK mode.
I am trying to make it as LEAN as possible.
If MMTTY can bring the FSK as a digital signal which can be fed into the
K3 as digital signal (0/1) that would be nice and Lean. Just as N1MM and
CW over one cable for the K3.
Of course I can use two
Hi all,
I can control the K3 over the rs232 cable. No problem.
CW en PTT also works over the same cable with the PTT-KEY settings on.
VERY NICE!!! Keeping the winkey as a backup now.
Now the question: Is it possible to run RTTY in FSK D over the rs232
cable directly into the K3 just like
Sent: Saturday, January 22, 2011 7:39 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 RTTY - PSK D
Hi all,
I can control the K3 over the rs232 cable. No problem.
CW en PTT also works over the same cable with the PTT-KEY
settings on.
VERY NICE!!! Keeping the winkey
Arie,
I assume you are asking whether it is possible to use the RS232 port to
send FSK RTTY in FSK D. If so, the answer is yes. Below are three
theoretically possible methods - only the third one works, and only from
a limited selection of software, but it is possible.
The K3 does not accept
Thanks Rich, clear answer.
Well...
The idea was to use LP bridge.
Send the RTTY keying via a com-port from MMTTY, and control the rest of
the K3 via another com with N1MM logger. Since there's only one cable to
the K3, all signals should run over the same cable, just like the
combination of
Arie,
You will have to ask Larry Phipps if that MMTTY stream is implemented in
LP-Bridge.
RTTY via DTR is possible, but would require the one transistor keying
circuit to drive the PTT-IN pin on the K3s ACC connector. Of course,
LP-Bridge may or may not support DTR through its interface.
The MMTTY/EXTFSK combination can use DTR on a serial port for FSK
keying, but I have no idea whether EXTFSK would work through LP-Bridge.
Without EXTFSK, MMTTY uses TxD for FSK keying, not DTR, and that cannot
be shared with radio control.
If you are already using MMTTY, by any chance does
Thanks for everyone's assistance. I had a multiple of issues, all due to
adjustments, etc.
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I am trying to set up my computer, etc to use HRD, DM780, and my K3.
I can tune around and receive and decode psk and rtty just fine with DM780,
but when I go to send, it goes in to transmit but has no power out.
My first guess is there is no modulation, but how can I verify?
Mike
AI4NS
Mike,
In answer to your question, you can tell whether there is modulation or
not by using the K3's Monitor function (the MON level must of course be
above zero for this to work).
As for the answer to the question you didn't ask, one possible explanation
for the lack of modulation is that your
Just tried working PSK 31 (Data Mode) but can't work split. Used the AB tap
twice to copy all info to VFO B.
Am I doing something wrong here or did I run into a firmware issue? I did
use the XIT, which works.
I used the paddles to generate PSK.
FW = 3.66
73's, Evert PA2KW
Is there a French station using K3 in PSK mode please.
Thanks.
F8EZE Jean
Greetings de F8EZE Jean
CDXC 1307
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Ian Greenshields wrote:
I think even after it hopefully becomes possible to separate the K3's
decoded text and radio responses on the serial port, some form of
waterfall
aid to tuning and band monitoring will still be extremely useful within a
logging / control programme, then requiring
Joe has already provided one reason why there is little point in using the
computer soundcard for receive and the K3 DSP for transmit. As he said, it
would be much more difficult to ensure that TX and RX are both on precisely
the same frequency as if the soundcard was doing both, and they do need
Hi Julian,
Thanks for the responses:
Joe has already provided one reason why there is little point in using the
computer soundcard for receive and the K3 DSP for transmit. As he said, it
would be much more difficult to ensure that TX and RX are both on precisely
the same frequency as if the
Ironically, your Windows version of KComm running under wine seems to work
perfectly, including the PSK31 DLL, whereas I had much trouble with the
linux version (finger trouble on my part, almost certainly).
73 Ian G4FSU
2009/3/1 Julian, G4ILO julian.g4...@gmail.com
This might be useful in
Ian Greenshields wrote:
Yes, I've also noticed this. The K3 RTTY decoder is very good; the K3
PSK31
decoder falls short of soundcard decoders. The opposite seems to be true
on
the TX side where the K3 encoders seem better (lower IMD) than the
soundcard
variants. This was the main
I'm either missing something or I have a feature request for KComm,
depending on whether I have misunderstood how to use the software!
I've been looking for a contest / general purpose logger for data modes from
the K3 that can make use of the K3's PSK D and FSK D modes for RTTY and
PSK31, i.e.
Greenshields
Sent: Saturday, February 28, 2009 11:39 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 KComm PSK D / FSK D Question
I'm either missing something or I have a feature request for
KComm, depending on whether I have misunderstood how to use
the software! I've been
Lyle Johnson wrote:
If you really must do this, you should probably set CONFIG:TX ALC OFF
once you've adjusted your power level using the PWR control. Otherwise
the ALC system will see the Tx output not being what was requested and
will increase the gain, leading to power creep and all
Is there somewhere where I might find a more exhaustive step by step
discussion of seting up sound levels on the pc while connected to the K3. I
may be a little dense and have not felt entirely comfortable with what I
have read in the manual. Maybe this discussion might include config menu
items
Is there somewhere where I might find a more exhaustive step by step
discussion of seting up sound levels on the pc while connected to the
K3...
Not that I am aware of.
Best to learn by doing. Put the radio in TX TEST mode and play with the
LINE IN GAIN and the PC soundcard program.
Robert,
I don't know of any step-by-step instructions, the whole picture is
complicated because of the variety of computer soundcards that could be
used. As far as the K3 is concerned, the procedure is simple - adjust
the line-in gain setting, much as you would with the mic gain.
Yes, the
Robert Hall - KE7VHF wrote:
Is there somewhere where I might find a more exhaustive step by step
discussion of seting up sound levels on the pc while connected to the K3.
I
may be a little dense and have not felt entirely comfortable with what I
have read in the manual. Maybe this
Don, Lyle, Greg,
You guys are fabulous!
Thank you. I would really like to make sure I have things tied down for Feb.
73's
Rob
KE7VHF
Robert Hall
www.RobertHall.com
On Thu, Jan 29, 2009 at 10:42 AM, Don Wilhelm w3...@embarqmail.com wrote:
Robert,
I don't know of any step-by-step
I'm unhappy with the advice to set the level to 4 or 5 bars on the ALC scale
because when I do this my K3 puts out twice the power set on the POWER
control making it far too easy to overdrive the PA. I prefer to adjust the
input level until the output power matches what it says on the power
Setting up my K3 for PSK31. Using PC with on board sound. (Intel
Integrated Audio). Stereo cable from K3 to sound card. I am looking to
adjust ALC for 4 bars using the line in adjustment. I find that a level
change of one unit on K3 (i.e. 5 to 6) changes ALC from zero bars
showing to 5 bars
Setting up my K3 for PSK31. Using PC with on board sound. (Intel
Integrated Audio). Stereo cable from K3 to sound card. I am looking to
adjust ALC for 4 bars using the line in adjustment. I find that a level
change of one unit on K3 (i.e. 5 to 6) changes ALC from zero bars
showing to 5
Ron,
I would suggest that you reduce the soundcard output level and increase
the K3 line in setting for smoother control of the audio level. I run
my K3 line in at 12 to 13 and adjust the soundcard level to achieve the
proper number of ALC bars (4) - my soundcard controls are at the
Bruce,
I don't know what software you are using on the K2/K3, but most software that I
have used allows you to select 'PTT Via CAT Command' on the serial RS232 input
which doesn't require setting DTR/RTS. I have had very good luck with this
configuration.
73
Dave KD1NA
Due to the different
.
Thanks
Al
AD9P
/---Original Message---/
/*From:*/ Alan D. Wilcox mailto:[EMAIL PROTECTED]
/*Date:*/ 2/16/2008 4:19:46 PM
/*To:*/ elecraft mailto:elecraft@mailman.qth.net
/*Subject:*/ Re: [Elecraft] K3, and PSK
Al,
I just posted K3 configuration for PSK31 - How To a moment ago.
Perhaps
Al,
I just posted K3 configuration for PSK31 - How To a moment ago.
Perhaps it'll help you out.
Alan
Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701
AD9P wrote:
Is there a way to mute the speaker while operating PSK ?
So far I have not been able to
Is there a way to mute the speaker while operating PSK ?
So far I have not been able to get PSK figured out just yet on the K3.
Serial number 400 went together great, and operates very well on CW, es SSB.
But the Digital Modes (PSK) is still cloudy .
Thanks
Al
AD9P
--
View this message in
Turn the AF or Monitor down?
On 16/2/08 00:13, AD9P [EMAIL PROTECTED] sent:
Is there a way to mute the speaker while operating PSK ?
So far I have not been able to get PSK figured out just yet on the K3.
Serial number 400 went together great, and operates very well on CW, es SSB.
But the
Actually if its during TX, he should turn down MON.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David Ferrington,
M0XDF
Sent: Friday, February 15, 2008 5:06 PM
To: AD9P; Crafters
Subject: Re: [Elecraft] K3, and PSK
Turn the AF or Monitor down
44 matches
Mail list logo