.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
I I am a 74 year old retired EE with lots of bread boarding and kit
experience. Also I have a KX3 which I bought factory build as well my KAT500
George, W6GF
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Hisashi T Fujinaka - ht
inuously improve the K3 in a way that is
applicable to units in the field. If we find a practical way to achieve a
further significant improvement in the audio channel, we'll certainly make it
available.
73,
Wayne
N6KR
On Jun 7, 2013, at 3:55 AM, Bill W4ZV wrote:
Hisashi T Fujinaka wrote
Ca
n.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
El
because I missed 10M.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
erfall.jpg
Any help would be appreciated.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hisashi T Fujinaka wrote
I just got my P3 SVGA card and it's just showing video noise in the
waterfall. I reloaded the firmware just to see if that would fix things,
and it did not.
I'm not sure if you can attach things to the posts on here, so a picture
of the display is at:
http://w
d, but does anyone remember what it was?
I'm guessing if I do find one, I'll get it about the same time my K4
finally ships. :)
Thanks.
Todd K7FU
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
before I spent
that much on a preamp (I already have the KXV3).
I pre-ordered one. Now I can pretend my K4 and the KXV3B are in a race.
On Thu, 27 May 2021, Hisashi T Fujinaka wrote:
I'm probably too late for this, but does anyone remember all the
upgrades that you could make to the K3
to:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bu...@brannan.name
______
Elecraft mailing list
Home: http:/
mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS
ted my laptop during a contact with W1AW/something.
That contact went from 25WPM down to about 10WPM really quickly.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
El
e I worked several of you. I recall working W4TV on 160 and 30.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/
raft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) +
rd mounted on it.
73,
Don W3FPR
On 4/17/2014 5:28 PM, Hisashi T Fujinaka wrote:
Don, do you know about what the serial number was when the encoder
changed?
Thanks.
On Thu, 17 Apr 2014, Don Wilhelm wrote:
For those owners of newer K2s, be aware that the NEW K2 encoder (those
with a board solde
sing? Staring at the manual isn't helping me this morning.
Thanks for any help.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http:
4/19/2014 11:25 AM, Hisashi T Fujinaka wrote:
I think I'm being dense, but I can't figure out how to program the
function keys on my P3. I'm trying to set the span settings.
From what I understand I just tap span, dial in what I want, and then
tap one of the function keys. It doe
it was way over the $1300 I spent at Seapac!
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I'm looking through the "K3 & KX3 Pgmrs Ref, E11.pdf" and there doesn't
seem to be a way to send the "M1" message remotely. Am I searching for
the wrong string?
Thanks for any help.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BA
hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.
I guess I should've asked what M2, M3, and M4 are as well. I figured
they'd be SWT21-24 but that doesn't seem to work.
Is there a comprehensive list of the switches somewhere?
On Fri, 13 Jun 2014, Hisashi T Fujinaka wrote:
Perfect! Thanks!
On Fri, 13 Jun 2014, Stan Gibbs, KR
And as soon as I sent that, I finally found them on page 22 of the
"Pgmrs Ref."
On Fri, 13 Jun 2014, Hisashi T Fujinaka wrote:
I guess I should've asked what M2, M3, and M4 are as well. I figured
they'd be SWT21-24 but that doesn't seem to work.
Is there a comprehen
Does the K3/0 do serial comminications to a logging program? I can't
seem to get it working, so my current guess is no.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 =
On Sun, 15 Jun 2014, Hisashi T Fujinaka wrote:
Does the K3/0 do serial comminications to a logging program? I can't
seem to get it working, so my current guess is no.
And once again I found the answer (I think) right after sending an
email. It's in the RRC manual online.
--
elivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
oef()
span=0
Press any active key to escape
=
I tried again, and the same screen appeared.
None of the keys did a thing. So I power cycled again and saw the same
screen. I thought removing the P3SVGA might help but reloading and
resetting gave the same error.
What next?
Thanks.
--
Hisashi
Sorry about the missing subject line.
On Tue, 24 Jun 2014, Hisashi T Fujinaka wrote:
Well that was pleasant. I was making a band change (chasing W1AW/3 and
W1AW/9) and my P3 with P3SVGA went into a screen that said something
like "Ready to load Firmware." I tried to load the firmw
Odd. Sam Morgan told me to hold MENU and POWER and I don't see that in
the manual, but it worked.
On Tue, 24 Jun 2014, Carl Clawson wrote:
Hi Todd. Look up "Parameter Initialization" in the manual. That oughta
clear it.
73, Carl WS7L
On Tue, Jun 24, 2014 at 8:35 PM, His
les.
You don't say where you got the cable you're talking about, but if they
have translucent blue plastic, there's a good chance it's a counterfeit
chip according to what I've seen on the intarwebs.
--
Hisashi T
makes one preferred over the other (such as elecraft serial/usb
> adaptor cable)
> Prolific also works with most stuff too.
> For example, are they "platform" related? (micr0$oft)
> Is this akin to "ordinary" DVD player as opposed to a "blue ray" player
>
case, I
>> wasn't operating, just checking SWRs with a new balun.
>>
>> Chris
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing li
in the day because of that reason and it was several hundred
dollars.
I just bought a Rig Expert for the same sort of reasons.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
_
e
here to argue you can if you want.)
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
gt; Ham radio being a knowledge-based hobby, some people prefer to
> understand what they're doing. Apparently others don't seem to care.
>
> Dave AB7E
>
>
>
> On 3/9/2012 9:49 PM, Hisashi T Fujinaka wrote:
>> So let me say one thing I know about antennas:
&g
On Sat, 10 Mar 2012, Jim Brown wrote:
> And there is NO MAGIC to parallel wire feedline
I think the advantage (not magic) is that you get less loss in ladder
line than you do through the dielectric of coax.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8
life?Recommendations? Thumbs up or thumbs
> down?
>
> Thanks and 73s
> Jon
> WB2RYV
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> T
On Sat, 10 Mar 2012, Jim Brown wrote:
> On 3/10/2012 5:14 PM, Hisashi T Fujinaka wrote:
>> I think the advantage (not magic) is that you get less loss in ladder
>> line than you do through the dielectric of coax.
>
> FALSE! For all practical purposes, there is NO dielectric
On Sat, 10 Mar 2012, Jim Brown wrote:
> On 3/10/2012 8:40 PM, Hisashi T Fujinaka wrote:
>> I think you're wrong here.
>
> The math is VERY well known. There's are a couple of excellent technical
> papers about this in one of the ARRL Antenna Compendiums. Another
&
much better support than any other big rig manufacturer, but have you
seen how pretty the Icom is? :) My biggest complaint about the Elecraft
is the UI and I think the Icom might have a better one (though I only
stared and drooled for a minute or so).
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE
> the rest of us to quit trying to learn from each other on this forum so
> we can spend more time telling somebody what our weather is like.
>
> Dave AB7E
>
>
>
>
> On 3/10/2012 6:10 PM, Hisashi T Fujinaka wrote:
>> I went to MIT. I can analyze the crap out of this
27;t trust some of the
denaturing that they put in the stuff at the hardware store, and because
methanol will melt some plastics, and because they put oil in some
rubbing alcohols, I use Everclear. It's not legal in ever state,
however.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + B
//mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht.
ered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered
The only way I hear about firmware releases is when people have problems
with them. Is there a mailing list for firmware releases? Is my spam
filter eating them?
Thanks for any help.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50
: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS
n.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS +
erent as-- well-- day and night!
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
We can help each other to learn a bit more from
> whatever level of understanding of Electrical Laws and Circuits we may each
> be at...
>
>
> 73,
> Don
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.
t makes it more like building a normal kit. :)
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
s FB.
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:El
I bet I could throw it a good 20-25 feet.
On Sat, 31 Mar 2012, Eric Swartz WA6HHQ - Elecraft wrote:
> Range?
>
> On Mar 31, 2012, at 5:06 PM, W0MU Mike Fatchett wrote:
>
>> Anyone know the range for the 100w amp?
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6
t away?
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
wattmeter in the KPA100
> - most likely bad diodes at D16 and D17.
>
> 73,
> Don W3FPR
>
>
> On 4/2/2012 11:37 AM, Hisashi T Fujinaka wrote:
>> OK, it's S/N 4355 with all the latest mods and it used to just reset
>> when I got on 15M phone. Now it's rese
K2 power knob to about 30 watts. set to CW and hold the key down long
> enough to read the external wattmeter. If it shows full power output
> (greater than 100 watts), you have a problem with the wattmeter in the KPA100
> - most likely bad diodes at D16 and D17.
>
> 73,
>
gt;
> Is this the newer KPA100 design with blue toroid cores at L16 and RFC1? If
> not, you will want to install KPA100UPKT, it was designed to combat an
> oscillation tendency.
>
> 73,
> Don W3FPR
>
> On 4/2/2012 8:19 PM, Hisashi T Fujinaka wrote:
>> After getti
mfairs? There's almost no chance I'm going to wait that long (the
closest to me is Seapac in June), but I figure I should still ask. :)
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + M
; On 4/3/12 at 10:18, ht...@twofifty.com (Hisashi T Fujinaka) wrote:
>
>> I told myself I'd order a K3 if a certain event occurred, and the event
>> occurred. As an additional incentive, my K2/100 is acting up.
> --
I
> complete assembly of these two kits but I'm already leaning heavily toward
> factory assembly for my KPA-500 when the time comes
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
_
>
> Relax, take a deep breath, and chill. Our KX3s will arrive when they're
> ready.
Completely off-topic, but do you know how long I waited for an IC2AT? A
synthesized handheld! For less than $300!
I was in high school then. Waiting was torture.
--
Hisashi T Fujinaka - ht...@twofifty
think is a nanosecond is (about a foot) which is
10^9Hz or about a gigahertz.
So back-of-the-envelope, UHF connectors impedance mismatch only matters
around a gigahertz. This would horrify my engineering profs because
MIT back-of-the-envelope calculations would require Maxwell's equations.
-
if
> relevant) of good transmission vs. the frequency when it begins to draw more
> current. If it is oscillating, determining the approximate frequency of
> oscillation can be helpful.
>
> This is not an easy thing to troubleshoot, I wish you luck.
>
> 73,
> Don W3FP
people
don't know what they're doing with their LCDs than before.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: ht
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> <mailto:Elecraft@mailman.
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
Subject: [Elecraft] OT: Popular power supply query
>
> Time has come to purchase a new power supply - the 33 year old Astron
> has passed on. What are the popular and reliable supplies being used
> these days? If there are some to seriously stay away from, please so state.
>
> Thanks
stinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95
VZ- wrote:
>>> Hi
>>>
>>> current beta firmware 4.51 did show great improvements in WPX CW contest.
>>> When will it be final?
>>> or is there any issue that will be added/changed in the final version?
--
Hisashi T Fujinaka - ht...@twofifty.com
B
at 10 or so. Also, I always use the SPOT function to get the
> received signal in the proper place to decode.
Does anyone have any other pointers? I never have been able to get the
decoder to do much for me, even during a contest.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/
d I chase DX and enter
>> contests [less so in the past, more in the future]. I have a "small
>> pistol" station with no allusions of being a band master. Question:
>> which of these two options might I find more useful for my station and
>> operating preferences?
net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing
n/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + B
email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
worked as expected.
I'm getting all sorts of errors from the Mac utility, but if I use a
Win8 laptop I have no issues at all.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
El
DX from my compromised urban location.
On Wed, 25 Feb 2015, Gary Gregory wrote:
Rick
Glad it worked out for you.
I lost faith awhile ago.
Gary
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
_
I just checked the P3 beta folder and found it empty. Does that mean I
should erase what I have right now (1.35) and go back to the actual
release or something else?
Thanks.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.q
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com
--
Hisashi T Fujinaka - ht...@twofifty.com
kground info on this? I don't remember getting a
schematic or board layout with my SignaLink and if I did, I don't know
where I'd find it.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
e boost unless they are using one of the notoriously
"dirty" (cheap) amateur products.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://ma
I was copying RTTY on my P3 SVGA and I found that it was dropping a lot
of characters. I finally figured out how to decode directly on the K3
and it wasn't dropping characters at all.
Is there something I have set up incorrectly?
Thanks.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE
by the K3. If you're missing characters you
may want to adjust the threshold on the K3. See the decode tips in the K3
manual on page 33.
73,
Mike K2MK
Hisashi T Fujinaka wrote
I was copying RTTY on my P3 SVGA and I found that it was dropping a lot
of characters. I finally figured ou
te:
>
> > Hi Hisashi,
> >
> > The P3/SVGA board is acting as a terminal. It does not do any decoding. It
> > just displays the decoding done by the K3. If you're missing characters you
> > may want to adjust the threshold on the K3. See the decode tips in the K3
's benefit so that we are in sync.)
Hisashi, at this point, I'm wondering if you are seeing this while
transmitting as I do? or do you see it during receive? If during receive,
that would be a new problem.
Dick, n0ce
-Original Message- From: Hisashi T Fujinaka
Sent: Monday, A
p://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3
ching power supply. :)
On Thu, 17 Oct 2013, Gary, W7TEA wrote:
Thank you Hisashi! I called Astron and they quoted $26US including shipping.
Gary
On Oct 17, 2013, at 2:26 PM, "Hisashi T Fujinaka [via Elecraft]"
wrote:
I have an Astron 35A and was fishing around for details and
ease help support this email list: http://www.qsl.net/donate.html
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
@mailman.qth.net] On Behalf Of Hisashi T Fujinaka
Sent: Tuesday, November 19, 2013 8:34 AM
To: Robert Nobis
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Reliable DC Power Supply for K3/P3
The only thing that bit me: Astron XX does not mean XX amps. I have an
Astron 25M and I was trying to figu
else have this problem and have a fix? I'll have to call Brandon
tomorrow to figure out what all the steps are to get tx audio working. I
forgot to write them down.
Thanks.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8
R
On 7/27/2014 6:50 PM, Hisashi T Fujinaka wrote:
I had a bit of trouble getting my mic audio working initially, but with
Brandon's help it was working. After updating my firmware it's back to
having no audio. I can change MIC SEL to FP and still run the K3
directly, but with it set to rP
by Elecraft) has an electret element, and *does*
need bias.
Turn Bias on for the rear panel connection and it should work (or set the
jumper in Remote Rig to provide bias if you are plugging it to the RRC box.
73,
Don W3FPR
On 7/27/2014 7:03 PM, Hisashi T Fujinaka wrote:
I've tried it
ould have to stop producing
profitable products just to spend time trying to pull software 'expurts' out
of the trouble they themselves generated.
And once the 'community' turned the firmware into total trash, then you
would expect Elecraft to bail you out
--
Hisashi T Fuj
bably a good thing I
couldn't find the programming board. :)
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
eeing what works and then
getting on the air. I can't believe some of the contacts I've made.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mai
pment that
use the older scheme.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.
101 - 200 of 252 matches
Mail list logo
