Re: [PSES] Is your company doing enough to ensure adequate EMC complia nce?

y involved. Compliance is simply adherence to a specified set of rules, is it not? Why should the industry matter? Gary From: "Nyffenegger, Dave" To: EMC-PSTC@LISTSERV.IEEE.ORG Sent: Friday, January 15, 2016 1:27 PM Subject: Re: [PSES] Is your company doing enough to ensure adeq

Re: [PSES] BLE and air plane travel

nions Only www.jmwa.demon.co.uk <http://www.jmwa.demon.co.uk/> J M Woodgate and Associates Rayleigh England We live in exiting times From: Curtis McNamara [mailto:mcnam...@umn.edu] Sent: Friday, July 8, 2016 5:06 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] BLE and air plane travel A friend has h

[PSES] Uganda

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES O

[PSES] Certification Labels in Software

@ip-ce.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not

Re: Notified or Competent Body?

All, I believe that it is important not to confuse the two. Competent Body: An organisation appointed under the EMC Directive. The sole responsibility of a competent body is to provide the report or certificate which is a mandatory part of an EMC technical construction file. Notified Body: A t

RE: Radio Approvals

Sam, There is no dedicated forum that I am aware of. As for ETS 300 113, Issue 1 was published in January 1992 with Issue 2 following in June 1996. The second edition has been amended once in March 1997. There are no further published amendments. Regards, James

RE: CEPT/ERC Recommmendation 70-03 (Tromso1997)

..@dscltd.com] Sent: 17 April 1998 13:22 To: EMC-PSTC (E-mail) Subject:CEPT/ERC Recommmendation 70-03 (Tromso1997) Hello , I have some questions related to the above CEPT/ERC recommendation related to the use of short range devices.

RE: antenna calibration

I am not sure if anyone has already posted an answer to this question, but we use NPL. The contact details are: Mr M Alexander Antenna Calibration Dept. National Physical Laboratory Queens Road Teddington Middlesex TW11 0LW Tel: 0181 943 7175 Fax: 0181 943 6458 I hope this is of use. Regards -

Job Opportunity

Radio Frequency Investigation Ltd (RFI) is an independent EMC, radio and telecommunications type approval laboratory in Basingstoke, Hampshire, England. RFI currently have vacancies for 1 - 2 positions in their Regulatory and Technical Support Services group. The positions would involve provid

RE: CE Mark disambiguation

This is a multi-part message in MIME format. William, Thank you, this is close enough. -Doug Doug Powell, Staff Engineer Corporate Compliance Dept. Advanced Energy Industries Inc. _ From: Sykes, William Thomas (Tom) [mailto:wsy...@lucent.com] Sent: Monday, August 15, 2005 12:54

CE Mark for other jurisdictions

eview, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply e-mail and destroy all > copies of the original message. > > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussio

RE: VCCI cost

Gary This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/li

RE: Antenna Mast Tie Downs - Non Conductive Tensioners

.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rul

Re: Antenna Mast Tie Downs - Non Conductive Tensioners

that I have at the moment is to bore new tie down spots or >use a metal strap tensioner, which I would rather steer clear of if >possible . > >Thanks in advance. > >Best Regards, > >Mac Elliott > >email: <mailto:fme...@motorola.com>fme...@motorola.com >

Re: Test Issues for ITE Shipped with Data

of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://list

Re: Test Issues for ITE Shipped with Data

demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-gui

RE: Test Issues for ITE Shipped with Data

nment is during shipping. Thank you. Monrad L. Monsen Senior Compliance Project Manager Product Compliance Test 303.673.2438 phone 303.673.2431 fax monrad_mon...@ieee.org StorageTek This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.iee

Re: Request for info on CE Mark penalties

ase we >> can >>> site rule based ethics by proclaiming that we meet the EMC rules and >>> therefore we have done all that we are required to do. These two >>> conflicting ethical positions could make for a long and interesting >>> discussion. >>> &

RE: Request for info on CE Mark penalties

> > > > > John Tyra > Manager Product Safety > > > Bose Corporation > The Mountain, MS-450 > Framingham, MA 01701-9168 > > > Phone: 508-766-1502 > Fax: 508-766-1145 > > > -

EN 55022

t for the agreed common modifications. Best wishes Brian Brian Jones EMC Consultant and Competent Body Signatory Advice, Training, Expert Witness This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message t

Re: legend size

t; from a distance of 1 kilometer. (;-) -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website:

RE: legend size

ct with respect to EN60065 please? See the first sentence of clause 5 of EN 60065:2002. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society

Re: legend size

ease? > > See the first sentence of clause 5 of EN 60065:2002. > -- > Regards, John Woodgate, OOO - Own Opinions Only. > Deadlines are 90% of deadliness. > http://www.jmwa.demon.co.uk Also see > http://www.isce.org.uk > > > This message is from the IEEE Product Safety En

Re: legend size

egards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the lis

Approvals for power cubes

Engineer This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http

RE: ESD help for I/O ports

.e. I do not have a true ground and also as we all know the printer is in a plastic box. > >thanks >Pete > > > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list,

Re: ESD help for I/O ports

deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.o

Re: ESD help for I/O ports

loudy to do more than guess from here. Cortland Richmond This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listser

RE: quasi-peak detector question

or > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules:

RE: ESD help for I/O ports

and Parallel. The problem is contact discharge and at 4KV. I pass 3KV but when I go to 4, it fails. Can anyone give me some design guideline or recommendation that I need to follow? I greatly appreciate it. Thanks Peter This message is from the IEEE Product Safety Engineering Society emc-pstc

RE: RF Susceptibility: Sweep v/s spot check -- MIL-STD-461E

Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help

Re: Commercial EMC software

roblem for a good *audio* amplifier, of quite modest specification. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send y

Re: RF Susceptibility: Sweep v/s spot check

ay without providing it. > >Just for the record... I own a test lab, contract to a test equipment >manufacturer, and I'm a Lab Assessor. What I don't do is manufacturer >products, so >you can see I'm not biased. > Lack of bias usually results in intolerable dis

Re: RF Susceptibility: Sweep v/s spot check

be shot, again... Cheers, Derek Walton L F Research. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send

Re: RF Susceptibility: Sweep v/s spot check

stion, is "it depends" Cheers, Derek Walton L F Research This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to th

RE: RF Susceptibility: Sweep v/s spot check

Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee

Re: RF Susceptibility: Sweep v/s spot check

inal in its susceptibility, it can be pushed over the edge. -- Isidor Straus Chief Scientist, Curtis-Straus, LLC A Bureau Veritas Company 978-486-8880, Fax 978-486-8828 istr...@curtis-straus.com This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website:

FW: 2005 PSES Symposium: Early bird registration extended to Aug. 31, 2005

Thanks to all. Richard Georgerian 2005 PSES Symposium Chair This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/li

"Clearance Certificate" for RFID products in EU

http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/u

Re: Power adapter country requirements

e Engineer SpectraLink Corp 5755 Central Avenue Boulder, CO 80301 Phone: 303-583-5524 FAX: 303-443-1746 bfos...@spectralink.com This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http:

EMC Opportunity

the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org

Re: Buying ferrite tile.

gt; 弊郔轎煤滅馮毀嶼僵閉湮蚘眊 - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. W

RE: Buying ferrite tile.

www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Inst

Buying ferrite tile.

posium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/reques

Re: Shipment of prototype products into Israel

prototype. > >Can anyone offer advise as to a way forward. > >regards >Charlie Blackham > > >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list.Website: http://www.ie

Re: NRTL Factory Inspection Question ...

do business with just one of those contractors, > this all really means you > must inform the NRTL of all ten 'posible' > manufactoring locations and > all ten, including your own company, are to be > inspected on a quarterly > basis and thus increase your factory inspection

RE: Information on EMC Author

onin Medical Inc. From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Taylor, Michael Sent: Tuesday, September 06, 2005 8:53 AM To: Iain Summers; IEEE emc-pstc Subject: RE: Information on EMC Author Interesting. A search for this title came up blank. Would you be willing to share the exa

RE: NRTL Factory Inspection Question ...

dors with which do business (just as an > example for the > > sake of argument) for possible assembly contracts and at > any time you > > do business with just one of those contractors, this all > really means you > > must inform the NRTL of all ten 'posibl

RE: South African Certification

s Svensson This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructi

South African Certification

involved for the certification? How long is the time for certification from the day we submit all the documents needed? Anything else to think about? Thanks in advance for your help! Regards Anders Svensson This message is from the IEEE Product Safety Engineering Society emc-pstc discussion

Re: WEEE Process for US Mfr's

hey drew up the directive, probably because the root concern was to clean up on all the internal white and household goods which in the main are produced within the EU. This message is from the IEEE Product Safety Engineering S

RE: Changes to EN61000-3-2?

gate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to

Re: Changes to EN61000-3-2?

No change. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post

Re: How many declarations

.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: htt

Infra-red transmission in FCC part15.

ttp://cn.mail.yahoo.com/?id=77072> - -- This message is >from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...

RE: WEEE Process for US Mfr's

The importer within the member state is responsible for WEEE or if it goes straight to an OEM or the end user then they will be responsible. BTW - what do you mean by WEEE compliant? _ From: emc-pstc@LISTSERV.IEEE.ORG [mailto:emc-pstc@LISTSERV.IEEE.ORG] On Behalf Of christine

WEEE Process for US Mfr's

need to contract with an EU authorized agent to setup a collection / recycling program for our equipment. Chris This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pse

RE: ??: RE: SAR testing of telecom product.

Daniel. ___ 颲?憒??僥??lt;/span>雓?隤亥???lt;/span> http://cn.mail.yahoo.com This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To po

Re: Condenser Microphones - Euro/USA EMC Emission Requirements

some measurements I ask where it comes from ? I'd like to know such things to be prepared for discussions with any inspectors. Regards Piotr Galka - Original Message - From: "John Woodgate" To: "Piotr Galka" Cc: "EMC-PSTC" Sent: Tuesday, August

Re: In-house test equipment

ety. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message

RF Test Engineer/Technician sought

__ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the

Re: Lightning protection

oodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send

Lightning protection

ase notify sender and destroy this copy and/or delete it from your hard drive/server immediately. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org In

Re: Condenser Microphones - Euro/USA EMC Emission Requirements

ve testing costs and speed time to market because of this > consideration. > -- > Regards, John Woodgate, OOO - Own Opinions Only. > Deadlines are 90% of deadliness. > http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk > > -

RE: Limit on AM Broadcast power, USA

: at:11/10/2005 16:30:24 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee

ERC RECOMMENDATION 70-03

message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http

Harmonics and flicker

or defect that might arise from opening this e-mail or attachments, whether or not it has been checked by anti-virus software. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send

RE: Type of fuse in Schaffner power module inlet FN280

ws? Regards Amund Westin Oslo, Norway _ Scanned by Sanmina-SCI eShield ___ _ - This message is from the IEEE Product Safety Engineering Society emc-pstc discuss

Technical Sales Position Available

- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org

Re: Wayne Kerr Spectrum Analyzer

Hi Chris: I'm in the same boat. HP wants a ridiculous amount of money just to look at my now-obsolete 8591EM, and they said they'll be charging more in a couple of months. Although I'm not familiar with the SSA1000A, the used prices I see on the 'net for it make me think something in the A

Spectrum Analyzer 8591EM

. From: Pat Lawler [mailto:pat_law...@condordc.com] Sent: Thursday, November 03, 2005 10:23 AM To: EMC-PSTC@listserv.ieee.org Subject: Re: Wayne Kerr Spectrum Analyzer Hi Chris: I'm in the same boat.  HP wants a ridiculous amount of money just to look at my now-obsolete 8

Wayne Kerr Spectrum Analyzer

e: 315-797-4449 NetTest, a Member of the Anritsu Group - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your

Requirements for Buses and trucks

99 69 91 E-mail: k...@bolls.dk web: www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org

Re: Toxic gas detector performance standards

eadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Ins

Re: GOST vs. international EMC standards

, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list,

Off topic - Guarantee liabilities in EU

. Are all such Guarantee / warranty issues based on individual laws for each country? Regards Amund Westin - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org

Re: EN50366 uncertainties

suppose he's a competitor. Maybe not, though. Try: http://www.mcluk.org/Navframe.htm -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk - This message is from the IEEE Product Safety Engineering Societ

Re: Type of fuse in Schaffner power module inlet FN280

fuse (type, manufacturer, etc) they are > >using, but I have not received any answers. > > > >http://www.schaffner.com/components/en/product/productL22.asp?language_id=12 > >#withfuses > > > >Anybody who knows? > > > >Regards > >Amund Westin

Re: Trade Mags ... White Papers

--- This message is from the IEEE Product Safety Engineering Sociiety emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http

Re: IEC61000-3-3:2005 query

- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules:

Northeast Product Safety Society Meeting Next Wednesday, October 26th

(508) 786-7629 Direct (508) 786-7500 Main (508) 480-6332 Fax matthew.campane...@motorola.com email - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to e

RE: ESD test.

-p...@ieee.org] On Behalf Of pat_law...@condordc.com Sent: Thursday, October 20, 2005 11:05 AM To: emc-pstc@listserv.ieee.org Subject: Re: ESD test. Hi Sudhakar: I am not an ESD expect, but I had some comments. Are you sure you have to use IEC61000-4-2? I consider this a system test

ESD test.

object and intent of this test from the standards view? Sudhakar Wasnik. 408-542-2928 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a

RE: Looking for 400 Hz chamber filters.

Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (Fax) Military & Avionics EMC Is Our Specialty - -------- This message is from the IEEE Pr

Looking for 400 Hz chamber filters.

IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html

RE: EMF testing multiple radios

ering Tyco Safety Products / Sensormatic 6600 Congress Avenue Boca Raton, FL 33487 USA 561.912.6440 djumbdenst...@tycoint.com From: Carpentier Kristiaan [mailto:kristiaan.carpent...@thomson.net] Sent: Tuesday, October 18, 2005 10:49 AM To: EMC-PSTC List Subject: EMF testing multiple radios Hi

Re: Excluded Revsion Letters (english)

lowing: > > > > AA, BB, CC, DD, etc. > > > > Obviously this is not as efficient as: > > > > AA, AB, AC AD, ..., BA, BB, BC, BD, ..., CA, > CB, CC, CD, > ..., etc. > > > Any comments or experiences are welcome. > > -

Job Opportunities at SIEMIC Laboratories

free. <http://pa.yahoo.com/*http://us.rd.yaho .com/evt=36035/*http://music.yahoo.com/unlimited/> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ T

Fundamental electric shock info (was 60601-1 and patient leakage current)

Principal Product Safety Consultant Tigard, ORe 97281-3427 503/452-1201 fone/fax p.perk...@ieee.org - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http

R&TTE Labelling Question

nt of the sender. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...

RE: EMC testing for BSMI marking

host. For what its worth. Gary - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user

RE: EMC testing for BSMI marking

message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org

RE: Parts for Keytek CE-40

978 275 0800 ext. 334 Mobile: +1 603 765 3736 michael.hopk...@thermo.com One Thermo, committed to integrity, intensity, innovation & involvement From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Kishor Pancholi Sent: Thursday, October 13, 2005 3:27 AM To: emc-pstc Subject: P

Parts for Keytek CE-40

from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org

Parts for Keytek CE-40

: at:10/12/2005 13:52:04 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee

Re: FCC Part 18

ed. ... ] http://www.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65 /oet65.pdf I hope this is of some help. Cortland Richmond - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message t

Re: 60601-1 and patient leakage current

which > are better modelled as a current source than a voltage > source). > > > Ged Dean > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to

RE: IEC 60950-1 2nd Ed

Dept. Advanced Energy Industries Inc. From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: Tuesday, October 11, 2005 6:12 AM To: EMC-PSTC@listserv.ieee.org Subject: Re: IEC 60950-1 2nd Ed Doug Beckwith wrote (in <2005103312.68191.qm...@web30508.mail.mud.yahoo.com>) about 'I

Re: 60601-1 and patient leakage current

rrent", or even whether the leakage current you are measuring is required to be measured by the standard. Best Wishes, Jon Griver http://www.601help.com The Medical Device Developer's Guide to IEC 60601-1 - Original Message - From: "Doug Beckwith" To: "EMC-PSTC&qu

RE: 60601-1 and patient leakage current

735 From: Doug Beckwith [mailto:dougbeckw...@yahoo.ca] Sent: 11 October 2005 16:33 To: EMC-PSTC Subject: 60601-1 and patient leakage current Hi All, Question time again, this time concerning patient leakage current and permanently connected Class 1 equipment with a permanently connected earth. I h

  1   2   >