On 7/15/15 9:36 AM, Rick Lair wrote:
> Here are the codes,
>
> And you are correct, bytes not kilobytes,
Which version of LinuxCNC are you using?
>
>
>
> On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
>> On 7/15/15 8:54 AM, Rick Lair wrote:
>>> Hello Seb,
correct, bytes not kilobytes,
>
>
>
> On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
>> On 7/15/15 8:54 AM, Rick Lair wrote:
>>> Hello Seb,
>>>
>>> I have been working on this all week, I have run this program numerous
>>> times on my simul
se your
index_fanuc_lathe_tool remap script requires it? (That script was not
included in your Remapped Codes attachment, btw.)
--
Sebastian Kuzminsky
--
Don't Limit Your Business. Reach for the Cloud.
GigeNET'
; going, because we always have options that aren't available thru the
> config utility, Resolvers, 7i80HD cards for example.
>
> I will remove that straight away from what you are saying.
I wonder if it's needed for the "fanuc"
On 7/15/15 11:24 AM, Rick Lair wrote:
> What are the limitations on program size?
None that i know of.
I've personally run a program with 7500 lines, 147 kB in size, and I
expect much bigger should work without any problems.
--
Sebastian K
he fanuc T-word
remapping. Can you try getting rid of that remapping and replacing your
Txxyy gcode with standard M6 Tx tool changes, while leaving everything
else the same, and see if the problem goes away?
--
Sebastian Kuzminsky
-
On 7/15/15 12:06 PM, Rick wrote:
> But why would that work OK at any other time?
I don't know.
--
Sebastian Kuzminsky
--
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions pr
et the output of halui.program.is-running ( which is tied to a green
> led next to the red led on the guard).
Are you saying the delay between asserting halui.program.pause and the
machine actually pausing is longer in 2.6 than in 2.5, on the same
On 7/15/15 12:49 PM, Sebastian Kuzminsky wrote:
> On 7/15/15 12:37 PM, Rick wrote:
>> Hello Guys,
>>
>> I just narrowed it down to the release, in version 2.6 something went
>> off path in regards to halui.program.pause and halui.program.resume.
>>
>> I
ng, because the only change in halui between
2.6.5 and 2.6.6 has to do with the management of Task modes during MDI
calls, nothing that should affect the handling of pause.
Also, nothing at all changed in Task or Motion between those versions,
which are the other place
.net:6309/gene>
>>
>>
>> --
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
> --
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
fically
sim/axis/remap/manual-toolchange-with-tool-length-switch and
sim/axis/remap/rack-toolchange.
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-use
Pugh
Chris Radek
Jeff Epler
John Thornton
Moses McKnight
Norbert Schechner
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
h
The full changelog is the git history, of course, but a digested version
is here: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Released_2.6.X
On 08/11/2015 08:58 AM, Rick Lair wrote:
> Seb,
>
> Do you have the changelog?
>
>
> Rick
>
> On 8/11/2015 10:51 AM, Sebastian
lly issue G-code "S" commands.
The +/- buttons in Axis send "increase spindle speed" and "decrease
spindle speed" commands to linuxcnc.
You can cause halui to send these commands by poking the
halui.spindle.increas
ists, and IRC, and finding, reporting,
and fixing bugs. Committers to 2.7.0~pre7 are:
Andy Pugh
Benjamin Brockhaus
Chris Morley
Chris Radek
Daniel Rogge
Dewey Garrett
Jeff Epler
John Thornton
Moses McKnight
Norbert Schechner
Robert W. Ellenberg
Sebastian Kuzminsky
at goes through the UI and Task can not be relied
upon to have good realtime behavior. Anything important really needs to
go directly to Motion, via HAL.
--
Sebastian Kuzminsky
--
___
On 8/25/15 10:17 PM, Leonardo Marsaglia wrote:
> https://youtu.be/xyWUCGUbUaY
Very cool. What part does linuxcnc do? How is it hooked up in hal?
--
Sebastian Kuzmin
hard to add features, fix bugs,
write docs, run tests, and report how things were or weren't working.
Here's to many more years of friendly, effective collaborat
ilable when running from a terminal.
>
> I grepped around for ‘inihal’ but find no such term in my configs. Full error
> log is here:
>
> <http://3DTOPO.com/wAxisErr.txt.gz>
inihal and ini_hal_init are in
here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC#Resolving_outstanding_build_dependencies
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On 09/19/2015 09:42 PM, Evan Foss wrote:
> On Sun, Sep 20, 2015 at 3:29 AM, Evan Foss wrote:
>> On Sun, Sep 20, 2015 at 3:20 AM, Sebastian Kuzminsky
>> wrote:
>>> On 09/19/2015 07:00 PM, Evan Foss wrote:
>>>> Hi Folks,
>>>>
>>>> I am t
s (SF bug #430)
* touchy: G64 now takes optional Q
* gmoccapy: fix single stepping through a program
* pncconf: fix spindle control error
* toggle2nist: does not require floating-point
* motion: set the "In Position" status flag when aborting
Happy upgrading!
--
Seba
do apt-get
update", and then "apt-cache search hostmot2" should show all the
hostmot2 firmware debs that are available.
I'm not sure why i'm seeing it from my machine and you're not seeing it
from yours.
--
Sebastian Kuzminsky
-
here, but probably a "missing documentation"
issue
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
-
>>>> ___
>>>> Emc-users mailing list
>>>> Emc-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>> -
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
m: it's a good idea to
update packages, but don't update to a new distribution.
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
UI + and - buttons do), but i bet it wouldn't be
hard to add (he said, not having looked at the code).
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists
A new bugfix release in the 2.7 stable series is out. This one
primarily fixes an old, old bug in canned cycle preliminary motion. All
users are encouraged to upgrade.
--
Sebastian Kuzminsky
This bugfix release addresses an important bug in canned cycle
preliminary motion, plus some other minor stuff. All users are
encouraged to upgrade.
--
Sebastian Kuzminsky
our install instructions are here:
http://linuxcnc.org/docs/2.7/html/getting-started/getting-linuxcnc.html
If you're looking for the source code, it's here:
http://linuxcnc.org/docs/2.7/html/code/contributing-to-linuxcnc.html#_linuxcnc_official_git_repo
I hope that helps...
-
On 11/07/2015 04:22 PM, Andrew wrote:
> 2015-11-07 21:28 GMT+02:00 Sebastian Kuzminsky :
>
>> On 11/07/2015 12:23 PM, Paul wrote:
>>> Hello
>>>
>>> How and where do you download the latest version of Linucnc 2.7.2, I
>>> cannot find a link on the
gt; board.
A few hundred microseconds, tops, i think. Something's wrong with this
particular setup, not with hm2_eth in general.
--
Sebastian Kuzminsky
--
Presto, an open source distributed SQL query engine fo
On 11/23/2015 09:23 PM, Gene Heskett wrote:
> But can someone take a look at the screenshot attached, and tell me how
> to get rid of the nuisance error its showing? Preferably for good?
What does the end of ebony-button.ngc look like?
--
Sebastian Kuz
On 11/24/2015 09:39 PM, Robert Ellenberg wrote:
> Ok, i just pushed a fix for that build error, and now it seems to compile
> and run on my RTAI VM. Also, I pushed the branch to the main linuxcnc
> repository for the buildbot to chew on.
Awesome, thanks!
--
Sebastian
* John Thornton
* Norbert Schechner
* Robert W. Ellenberg
* Sebastian Kuzminsky
The changes since 2.7.2:
* docs: update install instructions for glade
* docs: correct description of m19 feedback requirements
* docs: clarify some pins in the halui manpage
* docs: fix link to the giteveryday(1
under the same model name. It was impossible to tell.
--
Sebastian Kuzminsky
On January 30, 2022 1:58:48 PM MST, Chris Albertson
wrote:
>Is there any disadvantage to placing a PCIe-based Parallel port card on a
>normal PC?
>
>
>On Sun, Jan 30, 2022 at 11:36 AM andy pugh wro
ly... I'll start a
new thread for that.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
nput which triggers an MDI command. Check out halui.mdi-command-XX:
http://linuxcnc.org/docs/devel/html/man/man1/halui.1.html#PINS
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/list
Those tests run for a long time normally. Try `runtests -v` to get output
while the tests are running.
--
Sebastian Kuzminsky
On February 10, 2022 11:39:58 PM MST, Andy Howell wrote:
>When I run the test suite there are a number of tests that seem to
>hang. It could be I am just imp
Yep, the buildbot is down. Hope to have it back up in the next day or so.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ome work on our part...
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
having trouble getting the
servo amps to respond.
Has anyone interfaced Meldas TRS-50 servo amps to LinuxCNC? The maintenance
manual we found was not much help in terms of the interface...
--
Sebastian Kuzminsky
___
Emc-users mailing
permission to redistribute them:
http://highlab.com/~seb/bridgeport-r2e3/
The LinuxCNC config for my machine is here:
https://github.com/SebKuzminsky/linuxcnc-config-bridgeport-r2e3
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users
days.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
s are lacking all debian package metadata.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ebian.org/raspi-team/image-specs>? I've been using
those to build and run LinuxCNC on my Raspberry Pi 4.
And yeah, because of how fast the RPi4 is, I just build everything
there, natively. I don't feel any urge to cross-compile.
u have to flash one of the SPI firmwares on it, using mesaflash.
--
Sebastian Kuzminsky
On 2/27/23 12:01, John Dammeyer wrote:
Two problems.
One: $249US and two: out of stock at the moment.
Mind you, so is the 7i92H but it was around $89 and with two Chinese BoBs at $5
each comes in much che
lt;http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/binary-armhf/?C=M;O=D>
I'm running LinuxCNC on a Raspberry Pi 4B (2 GB) using the normal
debian.org Bookworm arm64 distro, including the Preempt-RT kernel and
the linuxcnc-uspace deb from the debian.org package archive. It works fine.
On 11/4/23 18:39, andy pugh wrote:
LinuxCNC 2.9.1 has been released
Wooo!!!
That's awesome, thanks :-)
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
report any problems or bugs to me.
--
Sebastian Kuzminsky
--
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using
mitation is that it can only sample as fast as your base
thread, so you're somewhat limited in the speed of signals you can examine.
--
Sebastian Kuzminsky
--
Special Offer-- Download ArcSight Logger for FREE (a $49 U
roduct.aspx?Item=N82E16815158069
It's really lame how parallel port cards with the NetMos 98xx chipset
are still advertised as supporting EPP... :-(
I'll try to take another look at the Lava boards soonish.
--
Sebastian Kuzminsky
-
O board over USB or Ethernet, someone would have to
write an hm2_usb or hm2_ethernet module, which would detect the AnyIO
board(s) and provide this interface to them. This in turn would require
access to the local USB or Ethernet controller from within rtai.
--
Sebastian Kuzminsky
and the you
c.org/docs/devel/html/gcode_main.html#sub:G10:-Set-Coordinate
--
Sebastian Kuzminsky
If people were angels, just think of the savings! -- Bruce Schneier
http://www.schneier.com/blog/archives/2011/02/societal_securi.html
--
Th
eys55 docs claim that the device implements a standard USB HID
keyboard and joystick. Based on that, I'd expect it to just work with
hal_input. Is that not the case?
--
Sebastian Kuzminsky
the moon is full here every night / and i can bathe here in his light
the leaves will bury e
ite code to decode and build the
> packets defined in their specification. It's not a huge project, but it has
> to be done, then supported.
I'm currently talking to PoLabs (the makers of PoKeys) about doing this
work for them. We'll see what comes of it.
--
Sebastian K
maybe?
>> There are a lot of important fixes on the 2.4 branch that
>> will be in the final? 2.4 release.
>>
> Projected timeline?
We don't really have any timeline for releases, of any branch. It's
"when the developers find time for it".
--
Sebastian Kuz
utton that latches on, can be easily unlatched by
punching it (like an e-stop button), and that unlatches automatically
when the bottom limit switch (or the fuse) opens the circuit.
Any suggestions?
--
Sebastian
ctory).
But there's an easier way if you just want to run the 2.5 branch:
install the pre-built debs from the buildbot. Instructions here:
<http://wiki.linuxcnc.org/emcinfo.pl?Installing_EMC2#Debs_of_recent_git_versions>
--
Sebastian Kuzminsky
---
uildbot.
If you want to preview what 2.4.7 will be like (including the
parport/probe bugfix), you can also use the v2.4_branch packages from
the buildbot. The fix went into 2.4.6-44, so it's included in the most
rec
on the
$(CC) line, add "-lm" to the end and see if it builds for you.
--
Sebastian Kuzminsky
--
uberSVN's rich system and user administration capabilities and model
configuration take the hassle out of depl
if that works?
Some of our C++ code seems to be incorrectly getting linked by gcc
instead of g++.
What version of gcc are you using?
> And I have emc 2.6.0~pre running on Fedora 13
Great! And thanks for the bug reports and the testing help!
--
Sebastian Kuzminsky
---
On 08/09/2011 01:40 PM, Sebastian Kuzminsky wrote:
> On 08/09/2011 01:09 PM, kqt4a...@comcast.net wrote:
>> So in src/emc/sai/Submakefile on CC line I added "-lstdc++" and compile
>> completed
> Looks like you found another bug in our build system. Would you try
>
t4at5v. Plus some complaining about libXt, but I'm not going to
bother fixing that now But I will push the two things that look
like real bugs in our build.
--
Sebastian Kuzminsky
--
uberSVN's rich sy
> electronics, or my computer?
>
> What should I check next?
The next step should be to figure out the proper timings for your
stepper amps.
--
Sebastian Kuzminsky
--
FREE DOWNLOAD - uberSVN with Socia
|-a}
cd ..
dpkg-checkbuilddeps
Hm, wait, why are we *build*-depending on libtk-img? Is it really
needed to build, or just to run? Test, test... Ok, libtk-img is not
needed during the build process, I'll remove it from the
build-dependencies and remove the check from the src/configur
It's cleverly hidden in the hostmot2(9) manage, in the stepgen section. Look
at the control-type pin.
On Sep 9, 2011, at 13:58 , Tom Easterday wrote:
> I can't find documentation on how to set my 7i43 card stepgen to velocity
> mode. Where would I look?
> Thanks,
> Tom
>
On Sep 12, 2011, at 08:53 , Pierre Deswysen wrote:
> Hello,
>
> Can you tell me how to find the version 2.5 of EMC.
Version 2.5 has not been released yet. There is a 2.5 pre-release, which you
can get here:
http://buildbot.linuxcnc.org/
Or if you want the source code, check out the branch n
On Sep 12, 2011, at 09:24 , Pierre Deswysen wrote:
> Thank you for your quick response.
>
> Emc2 2.5 is already installed [?]
Maybe you are a time traveler?
I bet if you look at the complete version number you'll see more stuff after
the "2.5" that indicates it's a pre-release.
Did you insta
On Sep 12, 2011, at 10:19 , Pierre Deswysen wrote:
>> Maybe you are a time traveler?
>>
>
> I'm in belgium and clockmaker passionate about cnc.
>
> I installed the buildbot 2.5 branch (pre-release)
Neat!
Ok, so you're on 2.5.0-pre1.659 or thereabouts.
---
en run "apt-get update" to fetch the package list.
The packages are named hostmot2-firmware-{all|BOARDNAME}, run "apt-cache
search hostmot2-firmware" to get a list.
--
Sebastian Kuzminsky
--
BlackBerry
On 09/17/2011 03:34 PM, Dave wrote:
> On 9/17/2011 4:01 PM, Sebastian Kuzminsky wrote:
>> On 09/17/2011 11:30 AM, Dave wrote:
>>> Do I need to add a repository to the list?If so does anyone know
>>> the
>>> URL for the hostmot2 package repository?
On Sep 19, 2011, at 13:31 , Shabbir Hussain wrote:
> I am using EMC2 2.4.6 on Ubuntu 10.04 LTS (from live CD and updated). The
> problem appeared two to three times during last 20 days. The problem is, work
> offset values (saved in G54 using G10 L2 P1 X) became zero when I powered
> up the
On Sep 20, 2011, at 11:09 , John Prentice wrote:
> On a related topic I have wondered if it would be possible to have a second
> set of following error settings for rapids. I feel in my tuning that I
> sacrifice rapid performance to avoid "errors" that really only need to be
> tight during cutti
I'd like to look into this, but I don't have a gantry machine to test on… Can
you make a gantry sim config that displays this problem?
--
Sebastian Kuzminsky
On Sep 23, 2011, at 05:54 , Tom Easterday wrote:
>
> On Sep 23, 2011, at 6:19 AM, Viesturs Lācis wrote:
>
Yes, please post the complete config.
--
Sebastian Kuzminsky
On Sep 23, 2011, at 09:36 , Tom Easterday wrote:
>
> On Sep 23, 2011, at 10:38 AM, Sebastian Kuzminsky wrote:
>
>> I'd like to look into this, but I don't have a gantry machine to test on…
>> C
eased yet.
If this is the buggy behavior you're seeing, would you please try a recent 2.4
(compiled yourself or from the buildbot) and report back?
--
Sebastian Kuzminsky
--
All of the data generated in your IT infras
On Sep 23, 2011, at 15:45 , Tom Easterday wrote:
> On Sep 23, 2011, at 1:42 PM, Sebastian Kuzminsky wrote:
>> If i understand you two correctly, you're saying that you're using Axis, and
>> you can jog using the jog keys while in the MDI tab. Is that correct?
>>
On 09/23/2011 06:51 PM, Tom Easterday wrote:
> On Sep 23, 2011, at 5:53 PM, Sebastian Kuzminsky wrote:
>> The update from 2.4.6 to a newer 2.4 should be very simple, at least if the
>> computer is on the network. Just install the latest 2.4 deb from the
>> buildbot. Instru
ever used it and I don't know anything about it.
--
Sebastian Kuzminsky
--
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, securit
_SEQUENCE! But
then they must be jogged in world mode (aka Teleop mode) only. Don't
jog gantries in joint mode or you'll rack!
--
Sebastian Kuzminsky
--
All the data continuously generated in your IT infrastruc
On 09/27/2011 05:16 PM, Tom Easterday wrote:
> On Sep 27, 2011, at 6:51 PM, Sebastian Kuzminsky wrote:
>> Gantry machines need to be homed in joint mode, same as all machines.
>> And the gantry joints better have the same [AXIS_n]HOME_SEQUENCE!
>> But then they must be
> On Sep 27, 2011, at 6:51 PM, Sebastian Kuzminsky wrote:
>> I haven't looked at 1a yet, but it sounds like maybe it's something
>> to do with accel or vel limits of the joints themselves, vs the
>> limits of the trajectory planner? I'm not really sure.
m_3pwmgens=3"
>>
>> So how exactly should that config modparameter look like for 7i43 to
>
> What version EMC, not sure if 2.46 has the 3 phase pwm support in the driver
3-phase pwm is not in 2.4 . It is in 2.5 and master.
--
Sebastian Kuzminsky
ible you have some hitherto untried hardware, and it's got some
kind of problem with the new RTAI & Linux kernels in our 10.04 distro.
Please give us some details about your hardware. What make & model
motherboard? What CPU? How much RAM?
--
Sebastian Kuzminsky
--
(oops, emc-users got left off on the To: line, I added it back on)
On Sep 30, 2011, at 03:04 , andy pugh wrote:
> On 30 September 2011 03:09, Sebastian Kuzminsky wrote:
>
>> When you went to push your v2.5_branch, git informed you that your
>> v2.5_branch had diverged f
On Sep 30, 2011, at 11:04 , andy pugh wrote:
> On 30 September 2011 17:17, Sebastian Kuzminsky wrote:
>
>> Then: "git push origin my-branch:v2.5_branch", and it should work now,
>> because my-branch is a fast-forward from origin/v2.5_branch.
>
> I am ver
ra ones. Does the device
seem to be working (you can look at its pins with halmeter or 'halcmd show')?
What do you see if you install the input-utils package and inspect the device
with lsinput and input-events? Maybe also try
On 10/05/2011 10:39 PM, Przemek Klosowski wrote:
> On Wed, Oct 5, 2011 at 6:45 PM, Sebastian Kuzminsky wrote:
>
>>> Unexpected event EV_ABS ABS_48
>>> Unexpected event EV_ABS ABS_49
> That's because the EMC HID driver hal_input doesn't handle all data
&g
our door with his
shuriken.
And thanks for the bug report!
--
Sebastian Kuzminsky
--
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, se
r 7i43 configured for 3.3V? You may not be
providing enough voltage to your stepper amps. Check the W2 jumper.
>> Pastebin a dmesg trace of starting emc and jogging.
>
> http://pastebin.com/MZq5jbEe
That dmesg shows two different bitfiles being used, with different p
orrectly. So the problem could be my pcSome suggestions? Should I
> re-install ubuntu? This is so odd….
Try running memtest on the machine that's having trouble. I think it's one of
the boot options on the Live CD.
Also maybe try running latency-tes
on regarding the tool movement when angular axis A is
>>> moving.
>>
>> There is an ongoing thread about this subject.
>>
>> In short, you need to have the A axis as part of the GEOMETRY spec in
>> the INI file.
--
Sebastian Kuzminsky
On Oct 12, 2011, at 09:59 , Chris Radek wrote:
> On Wed, Oct 12, 2011 at 09:51:07AM -0600, Sebastian Kuzminsky wrote:
>>
>> Movements in B rotate the displayed tool around a line parallel to
>> Y, and movements in C rotate the tool around a line parallel to Z,
>> both
in the pipeline.
Sure, if by "in the pipeline" you mean "in the repository"! Dan Falk just
integrated OpenCamLib into FreeCAD :-)
http://www.anderswallin.net/2011/10/opencamlib-with-freecad/
--
Sebastian Kuzminsky
-
want EMC to ignore it while I do this, then take back over control. But I
> don't want to have to disable Axis.
Use halcmd to temporarily set your axis.N.f-error-lim pins to some silly
high value?
--
Sebastian Kuzminsky
--
On Nov 28, 2011, at 01:49 , Anders Wallin wrote:
> I think a lot of 3D and 2.5D capability can be built on top of these
> "drop-cutter" and "push-cutter" low level functions. I'll try to
> support integration of opencamlib into FreeCAD as best I can.
Ya
untu system are
> running any kind of personal firewall/packet filter, both hosts are on
> the same LAN. Do I have to allow external connection sot emcrsh
> explicitly? If so, how can I do so?
--
Sebastian Kuzminsky
---
601 - 700 of 1080 matches
Mail list logo
