Re: [Flexradio] need help

Bill, Everyone is out of the office at the moment. I don't know what's going wrong with the repair ticket, but I will make sure that the right people see this by Monday morning. Thanks for your patience and I hope you have a great weekend despite the radio woes. Eric Wachsmann FlexRadio System

[Flexradio] need help

Hello I put in for a ticket to send in this radio for repair but it keeps telling me I have typed the wrong version for this flex radio 3000 Can someone at flex respond Thanks Bill ope...@rcn.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.b

Re: [Flexradio] need help with a 1500 problem radio

I have similar problems occasionally, but I find that exiting the program, re-booting the computer and starting PowerSDR 2.7 again, resolves the problem. I also find that sometimes there is no audio at startup and this is resolved by pressing the TUN button twice. Also when all else fails, going

Re: [Flexradio] need help with a 1500 problem radio

Dale, Tell him to open a HelpDesk support ticket. It sounds like new user operator error Tim Ellison, W4TME Customer Experience Manager FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Web: www.flexradio.com On 3/7/2015

Re: [Flexradio] need help with a 1500 problem radio

Check the ANTENNA item on the powersdr for the 1500, On 03/07/2015 08:22 PM, w...@reagan.com wrote: Have a problem with a 1500, I just sold a few days ago. While using the little 1500, I never had any of these problems.I was using the radio with the latest software 2.7.2 and everything worked

[Flexradio] need help with a 1500 problem radio

Have a problem with a 1500, I just sold a few days ago. While using the little 1500, I never had any of these problems.I was using the radio with the latest software 2.7.2 and everything worked as it should,all bands and modes. The buyer states the following:He says 80,60,20,and10 meters work

Re: [Flexradio] Need help with N1MM + setting up CW with Flex 5000.

I could use N1MM+ and CW guidance for the 3000. Wayne, N4FP Sent from my Verizon Wireless 4G LTE smartphone Original message From: Brian Date:12/06/2014 20:37 (GMT-05:00) To: Flex-radio Reflector Subject: Re: [Flexradio] Need help with N1MM + setting up CW with Flex

Re: [Flexradio] Need help with N1MM + setting up CW with Flex 5000.

Likewise N5BA On 12/7/2014 00:19 AM, Ron Rosson wrote: I've got N1MM+ controlling the radio. But is not seeing the VSP for running CW. I've tried several combinations. If some one could assist me in setting up CW. It would be greatly appreciated. Please send direct to my email addres Thanks 73

[Flexradio] Need help with N1MM + setting up CW with Flex 5000.

I've got N1MM+ controlling the radio. But is not seeing the VSP for running CW. I've tried several combinations. If some one could assist me in setting up CW. It would be greatly appreciated. Please send direct to my email addres Thanks 73 & Best DX Ron Rosson N6XT Ex (WB6ORX)

Re: [Flexradio] Need help with diversity

First you need the RX2 module installed in the FLEX-5000 and a separate antenna connected to it (RX2-IN) that is diverse from the RX1 antenna in either polarity and/or distance apart (at least 1/2 wavelengthon the frequency of interest. You can do basic diversity by syncing the VFOs and pannin

[Flexradio] Need help with diversity

Can someone give me some advice about diversity reception using the Flex 5000? Is it even possible? I have a separate receive antenna system which I use easily with my K3 for diversity reception. If it is even possible with the 5000, how is the receive antenna to be connected and enabled for

Re: [Flexradio] Need Help Reducing Splatter

__ From: Jim Jannuzzo To: k9...@yahoo.com; "flexradio@flex-radio.biz" Sent: Saturday, October 20, 2012 8:37 AM Subject: RE: [Flexradio] Need Help Reducing Splatter Jim, You need to balance all the components in your audio chain, so that one is not u nderpowered

Re: [Flexradio] Need Help Reducing Splatter

x.com/psdrgain/psdrgain.htmlJim KJ2P > Date: Sat, 20 Oct 2012 07:36:06 -0700 > From: k9...@yahoo.com > To: flexradio@flex-radio.biz > Subject: [Flexradio] Need Help Reducing Splatter > > Setup: > Flex-3000 > Heil GM-5 dual element, or Heil HM-Pro > selectively/as-need

[Flexradio] Need Help Reducing Splatter

Setup: Flex-3000 Heil GM-5 dual element, or Heil HM-Pro selectively/as-needed feeding Ameritron ALS-500M to LDG AT-1000 to either G5RV or TA-36 all gear home-run bonded to common hard ground (not looped through other gear) (the TA-36 is fed with 1/2" hardline, decoupling coil at the boom, tower an

Re: [Flexradio] [FlexRadio] need help hooking Alpha 87a to 5000

Hi John, I have an Alpha 87A connected to my 5000A. It is pretty straight forward. If you are running DDUtil software in conjunction with power SDR there are a few other settings. If you need more info, contact me outside the reflector at my gmail address. 73, Bill, AB7AA ___

[Flexradio] need help hooking Alpha 87a to 5000

Hello all, I am trying to hook up my flex 5000 to a alpha 87a amp. and I would like to hear from some one who has done this so I don't mess up . no mention of the coax needed. should be real simple but I want to make sure I am rite . Also once the amp and radio are physically hooked up is th

Re: [Flexradio] Need help writing a 'batch file" to start PSDR and associated programs

Michael, Here is a VB script file that I use to launch PowerSDR, DDUtil, & DXLabs. Modify it to meet your needs. = Dim WshShell Set WshShell = WScript.CreateObject("WScript.Shell") WshShell.Exec("C:\Program Files (x86)\FlexRadio Systems\PowerSDR v2.2.3\PowerSDR.exe") WSc

Re: [Flexradio] Need help writing a 'batch file" to start PSDR and associated programs

On Tue, Nov 1, 2011 at 7:42 PM, Michael Tondee wrote: > ...What I'd like to do is have a one click option that would start > DDUtil, PowerSDR , my logging and rotator control programs etc. etc. in > the proper order... > = Michael, here is the file I use. You can edit it to suit your

Re: [Flexradio] Need help writing a 'batch file" to start PSDR and associated programs

Sent: 02 November 2011 00:43 To: flexradio@flex-radio.biz Subject: [Flexradio] Need help writing a 'batch file" to start PSDR and associated programs Well I think I remember it being called a "batch" file anyway. More of a hardware guy than software guy. What I'd like to

Re: [Flexradio] Need help writing a 'batch file" to start PSDR andassociated programs

Look for btrun430.exe. A great program. Keith --- Original message --- Subject: [Flexradio] Need help writing a 'batch file" to start PSDR andassociated programs From: Michael Tondee To: flexradio@flex-radio.biz Date: Tuesday, 01/11/2011 8:42 PM Well I think I remembe

Re: [Flexradio] Need help writing a 'batch file" to start PSDR andassociated programs

starts is not something you can control though. So it may or may not work for a given set of programs to start. 73 - Mike WA8BXN ---Original Message--- From: Michael Tondee Date: 11/1/2011 8:42:05 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Need help writing

Re: [Flexradio] Need help writing a 'batch file" to start PSDR andassociated programs

>>>AA6YQ comments below -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]On Behalf Of Michael Tondee Sent: Tuesday, November 01, 2011 8:43 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Need help writing a 'batch file&

[Flexradio] Need help writing a 'batch file" to start PSDR and associated programs

Well I think I remember it being called a "batch" file anyway. More of a hardware guy than software guy. What I'd like to do is have a one click option that would start DDUtil, PowerSDR , my logging and rotator control programs etc. etc. in the proper order. I think at one time someone poste

[Flexradio] Need help with 5K

Hello to the group and support folks, I have not been on the air for a while and have not used my 5K for months. I turned it on this morning and listened around the bands for an hour or so, then decided to go ahead and upgrade to the new SDR Version 2 The upgrade seams to go well as far as th

[Flexradio] Need help on Janus/Ozy SDR1000

Hi Has anybody been able to use the Janus/Ozy Interface together with the SDR1000 on Windows7 32bit ? It works great on Windows XP, but not on Win7. So any help would be appreciated. 73 Chris HB9BDM ___ FlexRadio Systems Mailing List FlexRadio@fl

Re: [Flexradio] Need help!

Read this: http://www.mail-archive.com/flexedge%40flex-radio.biz/msg02236.html The main item is to do a system restore to a restore point before the Beta install, uninstall your old Firewire driver, reboot and then reinstall v2.0.0. Then the new firmware with FlexRadio. There are a few bugs i

Re: [Flexradio] Need help!

I bet you did not remove the previous FW driver and then reboot before the installation of the new FW driver. The FW driver should recognize the radio no matter what firmware was loaded in the radio, the usual problem is that after the uninstall there is not a message telling you that you must

Re: [Flexradio] Need help!

I would start by unplugging your 3000 from the power supply and let it sit for the next few steps. Then make sure you have uninstalled all of the various flex drivers you mentioned. Make sure you have none listed in the Start->Control Panel->Programs and Settings applet. Next, reboot your computer

[Flexradio] Need help!

Have been running a F3K successfully for a year - upgrading along the way to 3.5.0.7171, SDR 1.18.5, and firmware 1.2.5.6. The laptop is a Toshiba, APCI-X64 based, 2.4 Ghz dual, running Vista OPS. Attempted to install SDR 2.0 Beta and FW driver V3.5.2.8028 unsuccessfully - the computer

[Flexradio] Need help with compiling libfreebob and jackd

I have been trying to get my FA-66 working in Ubuntu 8.10. Here is where I get stopped: I am trying to use this procedure: > Now let’s compile freebob. Get the sources from the SVN repository (the 1.0 > stable > branch): > > svn co https://svn.sourceforge.net/svnroot/freebob/trunk/libfreebob l

[Flexradio] need help on this one

For some reason, when I click on RTTY spots in Writelogs Bandmap, sometime the Flex 5KA is changing to cw mode and cw filters. Not every time, for instance, the K9MUG cluster spot/bandmap, worked properly dropping me right on his frequency, but others do not. they can be intermixed on the Writ

[Flexradio] need help with AT wire

Edward J White wrote: > Was installing the RX2 and HRFIO unit when I noticed that there is a > cut wire going to the antenna tuner unit. The wire in question is from > the flat 9 wire cable which is hard wired to the AT then it goes to > the plug in plug on the transmitter unit. The wire is #9

[Flexradio] need help locating individual

If anyone knows Dave Gardner KA9MCZ in Elgin IL? I need to locate him pronto. Please let me know, I would appreciate it. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512 535-5266 FAX512 233-5143 www.flex-radio.com -- next part --

[Flexradio] Need Help Keying CW With MixW and My SDR-1000

I am able to transmit and receive BPSK-31 and RTTY and I can receive CW just fine using MixW with my SDR-1000 but I am unable to send CW with MixW now that I am using virtual com ports. MixW (version 2.12) keys the PTT line but there is no CW or power output. Here are my SDR-1000 settings: DSP

Re: [Flexradio] Need Help Testing an SDR-1000 Carlsbad, CA

r the suggestions. I'll keep working on it. Mark N6SF - Original Message From: Tom Thompson <[EMAIL PROTECTED]> To: Mark Gang <[EMAIL PROTECTED]> Cc: flexradio@flex-radio.biz Sent: Wednesday, February 14, 2007 5:14:36 PM Subject: Re: [Flexradio] Need Help Testing an SDR-1

Re: [Flexradio] Need Help Testing an SDR-1000 Carlsbad, CA

Mark, You may have already tried this, but if you haven't, connect your SDR to a dummy load and then to the antenna and determine what the increase in noise is. Do the same for the FT-1000MP and see if the relative increase is the same. Also, if you have an antenna tuner, preferably a High

[Flexradio] Need Help Testing an SDR-1000 Carlsbad, CA

I have been using an SDR1000 for about a year. I recently moved to Carlsbad, CA and am temporally living in an apartment. I set up a simple dipole but the SDR-1000 is seeing a much higher noise level than my other radio, an FT-1000MP. I have tried all the usual fixes and talked with he folks

Re: [Flexradio] Need Help with popping in rx audio

CTED]> ; pa0pvn(a)hetnet.nl <mailto:[EMAIL PROTECTED]> ; pa0pvn(a)gmail.com ; pa0pvn(a)amsat.org . Van: [EMAIL PROTECTED] namens Tim Ellison Verzonden: zo 24-12-2006 18:29 Aan: Tim Ellison; A.R.S. - W5AMI; flexradio@flex-radio.biz Onderwerp: Re: [Flexradio

Re: [Flexradio] Need Help with popping in rx audio

A.R.S. - W5AMI wrote: > I did recently install a wireless d-link network in my house, and I > think it is the culprit. There is an activity led on the rear of the > wireless card that will blink from time to time, but I discovered that > when this audio popping starts, the led blinks quite rapidly

Re: [Flexradio] Need Help with popping in rx audio

--Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison Sent: Sunday, December 24, 2006 12:17 PM To: A.R.S. - W5AMI; flexradio@flex-radio.biz Subject: Re: [Flexradio] Need Help with popping in rx audio Chas, Use the newest version that is on the KB, version 2.0

Re: [Flexradio] Need Help with popping in rx audio

i fractum non sit, id reficere" -Unknown Roman consultant -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of A.R.S. - W5AMI Sent: Sunday, December 24, 2006 9:27 AM To: Flex-radio Reflector Subject: Re: [Flexradio] Need Help with popping in rx audio

Re: [Flexradio] Need Help with popping in rx audio

On 12/24/06, ZPO <[EMAIL PROTECTED]> wrote: > In the past I've bought shielded patch cables from BG Micro. I did a > quick google and found CAT-5e STP available from several places. > TigerDirect comes up pretty high in the list and they have the bulk > cable, as well as, the shielded RJ45s. I di

Re: [Flexradio] Need Help with popping in rx audio

In the past I've bought shielded patch cables from BG Micro. I did a quick google and found CAT-5e STP available from several places. TigerDirect comes up pretty high in the list and they have the bulk cable, as well as, the shielded RJ45s. I did a search for "stp" on the site and found the vario

Re: [Flexradio] Need Help with popping in rx audio

A.R.S. - W5AMI; Flex-radio Reflector Subject: Re: [Flexradio] Need Help with popping in rx audio If it is the wireless adapter, it is probably the device driver handling the radio on the wireless card that is causing you grief - would suspect some of his interrupt handling is a bit too long for P

Re: [Flexradio] Need Help with popping in rx audio

Mike, do you have any nomenclature on these shielded cables you have and where one might find some? When I discovered the Ethernet was the source of my noise, I thought about getting shielded cable, but we decided to try wireless instead. Solved one problem, created another... I may have a brand

Re: [Flexradio] Need Help with popping in rx audio

I've been replacing my Ethernet cables with shielded versions. They're not always easy to find. I haven't started wrapping the bridges and routers in foil yet. No wireless on my segment. It's interesting when I bring someone's PC to my home to work on it. Lotsa wireless networks around that the

Re: [Flexradio] Need Help with popping in rx audio

On 12/24/06, Bill Tracey <[EMAIL PROTECTED]> wrote: > If it is the wireless adapter, it is probably the device driver handling > the radio on the wireless card that is causing you grief - would suspect > some of his interrupt handling is a bit too long for PowerSDR's needs. > Thanks Bill. Your

Re: [Flexradio] Need Help with popping in rx audio

If it is the wireless adapter, it is probably the device driver handling the radio on the wireless card that is causing you grief - would suspect some of his interrupt handling is a bit too long for PowerSDR's needs. First thing - do you need the wireless adapter or can you use wired Ethernet

Re: [Flexradio] Need Help with popping in rx audio

I did recently install a wireless d-link network in my house, and I think it is the culprit. There is an activity led on the rear of the wireless card that will blink from time to time, but I discovered that when this audio popping starts, the led blinks quite rapidly, and in sync with the pops!

Re: [Flexradio] Need Help with popping in rx audio

nt: Saturday, December 23, 2006 7:28 AM To: [EMAIL PROTECTED] Cc: FlexRadio Subject: Re: [Flexradio] Need Help with popping in rx audio Thanks for that link to Search and Destroy. I downloaded it and ran the check. It did find a few things, however it did not correct the problem I'm having. I w

Re: [Flexradio] Need Help with popping in rx audio

There are a lot of programs that now "call home" to get the latest updates. I am looking for a good startup organizer program to turn off all the stuff not needed to run the radio. Thats Plan A. Plan B. Set up an extra hard drive with the minimum software to run the SDR-1000. Don't even con

Re: [Flexradio] Need Help with popping in rx audio

Mike: Try moving the audio card into a different slot if it is PCI. It sounds to me like you just MIGHT have interrupt sharing problems. Everyone just expects all of that to work like magic. Even I get caught occasionally by having these assumptions. Can you go back to an older version of

Re: [Flexradio] Need Help with popping in rx audio

Brian, Well it looks like everything from viruses, priority settings, to erroneous processes have been covered in the various replies. So I will throw out something new, paging. You mentioned you had 512mb of memory, which should be sufficient. Is this actually two sticks of 256mb? Could one h

Re: [Flexradio] Need Help with popping in rx audio

Y*E*S, thanks Bill. When I setup my FA-66 yesterday I used power from the PC using 6-pin to 6-pin Firewire connector. Alan K2WS was listening to my signal and heard a distinct noise that was somewhat like an old Teletype machine (Model 28). I switched from the PC power to a wall-wart and the no

Re: [Flexradio] Need Help with popping in rx audio

Also, please take a look at the EXCELLENT XP Optimization information that Tim Ellison accumulated and published in the Knowledge Base. Surely one of the utilities or M$ displays will show you what's up. http://kb.flex-radio.com/article.aspx?id=10307 and http://kb.flex-radio.com/article.aspx?id=1

Re: [Flexradio] Need Help with popping in rx audio

Brian -- these things can be positively maddening to track down. Can you think of any new applications or hardware you installed in the near vicinity of the problem starting?If you've added new USB or Firewire attached hardware you can try booting with it disconnected as a diagnostic to tr

Re: [Flexradio] Need Help with popping in rx audio

" Sent: Saturday, December 23, 2006 1:55 PM Subject: Re: [Flexradio] Need Help with popping in rx audio > On 12/23/06, Mike Naruta <[EMAIL PROTECTED]> wrote: >> H. Sounds like something new in your Windoze. >> >> Have you tried running Windows Task Man

Re: [Flexradio] Need Help with popping in rx audio

On 12/23/06, Mike Naruta <[EMAIL PROTECTED]> wrote: > H. Sounds like something new in your Windoze. > > Have you tried running Windows Task Manager > (Ctrl-Alt-Delete) and clicking on the Processes tab. > > You can click twice on the CPU tab and it will sort > the processes to show you from th

Re: [Flexradio] Need Help with popping in rx audio

H. Sounds like something new in your Windoze. Have you tried running Windows Task Manager (Ctrl-Alt-Delete) and clicking on the Processes tab. You can click twice on the CPU tab and it will sort the processes to show you from the most CPU down to the least CPU. See if you can identify the c

Re: [Flexradio] Need Help with popping in rx audio

Thanks for that link to Search and Destroy. I downloaded it and ran the check. It did find a few things, however it did not correct the problem I'm having. I was really hoping! Thanks Mike, Brian On 12/23/06, Mike Naruta <[EMAIL PROTECTED]> wrote: > Have you checked for spyware Brian? > > I

Re: [Flexradio] Need Help with popping in rx audio

Have you checked for spyware Brian? I use Spybot Search and Destroy: < http://www.spybot.info/en/download/index.html > Mike - AA8K A.R.S. - W5AMI wrote: > I hope someone can steer me in the right direction. > ___ FlexRadio mailing list FlexRadio@f

[Flexradio] Need Help with popping in rx audio

I hope someone can steer me in the right direction. I've been using the Flex for some time, and have never had problems such as this until just recently. I feel certain it's something in Windoze that causing the problem, however I've tried everything I know to do short of reformatting and re-inst

Re: [Flexradio] Need Help

Dave Meitzen wrote: I am using VAC 4 and SDR 1.6 so the manuals are a little off. I got MixW2 where it sees the audio (in the waterfall) the lines are bright (I use the program with my ICOM 775) but MixW2 does not seem to do a very good job of decoding PSK ? The sample rate is 8000 (as describe

Re: [Flexradio] Need Help

:[EMAIL PROTECTED] On Behalf Of Dave Meitzen Sent: Sunday, April 23, 2006 3:11 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Need Help I am using VAC 4 and SDR 1.6 so the manuals are a little off. I got MixW2 where it sees the audio (in the waterfall) the lines are bright (I use the program

Re: [Flexradio] Need Help

An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060423/4735dbc7/attachment.htm

[Flexradio] Need Help

I am using VAC 4 and SDR 1.6 so the manuals are a little off. I got MixW2 where it sees the audio (in the waterfall) the lines are bright (I use the program with my ICOM 775) but MixW2 does not seem to do a very good job of decoding PSK ? The sample rate is 8000 (as described in the SDR1K/VAC .pdf

Re: [Flexradio] Need Help - Brining up a SDR1K More help

Dave: This is not the simplest radio to set up so I would use the Delta 44 Quickstart Guide from here: http://www.flex-radio.com/delta44qsg.htm if you are following this exactly to the letter, then there is another issue. When you start the program and hit the "standby" button to make the

Re: [Flexradio] Need Help - Brining up a SDR1K More help

I reinstalled the USB - so I am by that issue. I now have a hiss but on signals. The audio tab is set as described in the manual. In the computer sounds section I have selected Delta-44 multi - gave it a try - no joy. I am at the point of looking for a AM station in the manual. Need to go from a hi

[Flexradio] Need Help - Brining up a SDR1K

I had this problem when my parallel port address did not match what the program expected. I didn't discover the solution to this problem until I went into the Bios to see how the parallel port was configured. 73 W9OY __ Do You Yahoo!? Tired of spa

Re: [Flexradio] Need Help - Brining up a SDR1K

t; Cc: flexradio@flex-radio.biz > Subject: [Flexradio] Need Help - Brining up a SDR1K > > When I power the unit up in a ham band MOX is depressed and the unit > starts > transmitting. I try to depress MOX and it stays depressed? &

[Flexradio] Need Help - Brining up a SDR1K

When I power the unit up in a ham band MOX is depressed and the unit starts transmitting. I try to depress MOX and it stays depressed? Recommendations? Thanks Dave

[Flexradio] NEED HELP CONNECTING TO TEAM SPEAK

Installed latest version from TeamSpeak site, went thru Eric's Quickstart Guide, tried to connect to server and get: "Connecting to 70.84.228.202:9274" "Got a bad response from the server" [in red letters] Voice message that (almost) sounds like "error" Any known issues? Phil, K3IB

Re: [Flexradio] Need help: TX of unwanted carrier

Dear Gerald,    I am not sure when you will get this, but I want to thank you for responding to my post.    The carrier produced by my SDR-1000 is over 50% full output, but I could not measure it accurately without a lower wattage slug for the Bird 43.  It is zero beat on the display frequen

[Flexradio] Need help: TX of unwanted carrier

Hello All,   Regards from Cleveland, Ohio!  I am enjoying my nicely enhanced SDR1000 (Thanks Bob) with excellent receiver performance and gorgeous receiver features and audio.  I love this new radio, but I haven't been able to make a contact yet.  I am sending out a high level carrier whenev