Hi.
I don't know if this is still active, but I'm gonna try...
I'd like to use mpv with my freevo-1 box. But, while mplayer2 kept
compatibility, mpv doesn't, and most of the options don't work, so freevo
and mpv don't get along.
I've tried to remove things in mplayer.py, but now I'm stuck. And f
Hello.
Is the list still working, at user level?
Well, I have wanted to ask something for a long time, and although it might
be late, I'm going to.
My question is about bookmarks when watching videos. When I started using
freevo, if I stopped a video, it resumed about ten seconds earlier that
poin
Hello everybody.
Although I still receive these mails, I don't read them and I just noticed
the news.
This might sound as if, in some way, I'm answering to what Dischi tought:
less and less users. However, in my case, that's not true. I'm a big fan of
freevo. I think it's a great piece of software
if I upgrade to kaa-display-git, I lose the control
over freevo again.
regards
Alberto
2013/7/1 Alberto Hernando
> Hi.
>
> Let's get this clear: squeeze is old-stable, wheezy is the current stable,
> and jessie is testing.
> Actually, while I was using squeeze, everything
his, there must be something wrong with freevo if it can't
control mplayer.
regards
Alberto
2013/7/1 Liz
> On Mon, 1 Jul 2013 12:16:15 +0200
> Alberto Hernando wrote:
>
> > Hi.
> >
> > Do you mean to upgrade mplayer to jessie? Or lirc? I am installing
> >
Hi.
Do you mean to upgrade mplayer to jessie? Or lirc? I am installing freevo
from source, mplayer2 too. I should have the latest of everything. If
possible, I don't want to install anything from testing.
thanks
Alberto
2013/7/1 Liz
> On Mon, 1 Jul 2013 09:26:34 +0200
> Alber
Hi.
It's freevo 1. Is freevo 2 usable? I haven't even tried.
regards
Alberto
2013/6/29 Dirk Meyer
> Hi,
>
> On 06/29/2013 01:16 PM, Alberto Hernando wrote:
> > I recently upgraded my debian box to wheezy, and then I was forced to
> > reinstall freevo and mpl
Hi.
I recently upgraded my debian box to wheezy, and then I was forced to
reinstall freevo and mplayer. I had to go to python-2.7 and freevo-git.
Well, everything installed fine, more or less, and I managed to make freevo
run again (btw, I had to remove the FULLSCREEN option and I didn't see it
do
c it
should work, but it doesn't for me. After this, init, make, etc, as before.
But remember not to update mplayer2 again.
see you
Alberto
El 6 de abril de 2012 20:27, Alberto Hernando escribió:
> Hi.
>
> I don't know if any of you has mplayer2 instead of mplayer. FYI, it is a
Hi.
I don't know if any of you has mplayer2 instead of mplayer. FYI, it is a
fork, website here:
http://www.mplayer2.org/
The main difference for me is that matroska support is better. Like
mplayer, mplayer2 is under development, and recently, I upgraded. My
mistake. At some point, they made a c
an USB DVB receiver"
Supported events:
also, I've tried removing the MatchProduct line and the same. Where can I
see the events that go to X?
thanks
2012/3/18 Jonathan Isom
> 2012/3/18 Alberto Hernando :
> > Hi.
> >
> >
> > I have remote working with evdev.
Hi.
I have remote working with evdev. The one which comes with Hauppauge Nova.
root@tinglao:/etc/X11# lsusb
Bus 002 Device 002: ID 2040:8400 Hauppauge WinTV Nova-T-500
I've been trying to configure it with lirc, but I can't, it seems that it
works as an evdev device. With no configuration, arro
Hi.
I'm trying to upgrade to beta-2 (also latest svn) and I get this crash:
Exception caught in main loop
Traceback (most recent call last):
File "/usr/local/lib/python2.6/dist-packages/kaa/base/main.py", line 205,
in loop
notifier.step()
File
"/usr/local/lib/python2.6/dist-packages/kaa/b
Hi.
I've noticed a weird behaviour with the cache. If I run freevo cache, I get
a message that it is too old, and it's completely recreated again. I can see
it under FREEVO_CACHE_DIR/vfs/...
But if I run it again, it still says that it is too old and, again, rebuilds
it. I don't think I'm doing an
Hi.
I don't know what your problem is, but when you run mplayer from freeve, you
can see the actual command with
ps -ef | grep mplayer
other ways can work too. Then, you can compare how you and freevo run
mplayer and see what's different.
good luck
Alberto
2011/2/9 Jim Duda
> I've been strugg
>
> You will need to remove the
> /usr/lib/python2.5/site-packages/freevo/util/distutils.py[c] files manually.
>
Hi.
It works! After another svn update (for the splashscreen bug) and removing
these files, videothumbs work again.
thanks
Alberto
--
duende a rayas
>
>
>
> Bah, now this is annoying because I did fix this bug myself, but it
> appears I forgot to commit it, doh!
>
> Both fixes should be on trunk now could you see if thumbnails are
> working again.
>
Hi.
In my case (python-2.5) things are as usual. Just for the record, what I get
is:
Tracebac
eevo/skins/osd/skin.py", line
244, in __calc_line
last_char_size = self.__get_string_width(font, string[:c+1])
File "/usr/lib/python2.5/site-packages/freevo/skins/osd/skin.py", line
182, in __get_string_width
w,h,ha,va = font.get_text_size(string)
ValueError: need more than 3
8.2 because it's the last version
> that behaves well with images, no matter their size.
>
>
>
> 2010/11/9 Alberto Hernando
>
>> Hi.
>>
>> Some time ago I started a thread about issues with seeing images. I've
>> increased the ram of my machine and I d
Hi.
Some time ago I started a thread about issues with seeing images. I've
increased the ram of my machine and I don't have crashes anymore. But it
still eats lots of memory. I can easily go to 80% of memo usage. It's a
pentium-iv, 3 GHz, about 800 Mb of ram (sharing some more memory for video).
D
On Thursday 19 August 2010 20:05:43 Paul wrote:
> Is it possible to run fxd command files from within the standard menu
> structure? I have quite a few running from the main menu now (internet,
> karaoke, the cheese photo application) and I wanted to clean it up by
> inserting some within the menu
An interactive high-level
object-oriented language (version 2.5)
ii python2.5-dev
2.5.2-15+lenny1 Header files and a static library for
Python (v2.5)
ii python2.5-minimal
2.5.2-15+lenny1 A minimal subset of the Python language
(version 2.5)
More ram
>
>
> But, actually, in cache.log:
>
> 2010-07-30 00:17:13,373 INFO config.py (523): LOGDIR: /var/log
> /var/log/freevo
> 2010-07-30 00:17:13,374 INFO config.py (524): STATICDIR: /var/lib
> /var/lib/freevo
> 2010-07-30 00:17:13,374 INFO config.py (525): CACHEDIR: /tmp /mnt/cache
> 2010-
Hi.
You don't say much about your problem. Looks like you are talking about
something in other thread.
Anyway, from what I understood about your problem, have you seen that you
can play video from different sources with different options? Maybe you can
put you audio options there, and pass no para
ugin.py", line 239, in
activate
print 'WARNING: duplicate plugin activation, ignoring:'
File "/usr/lib/python2.5/site-packages/freevo/config.py", line 122, in
write
sys.__stdout__.write(msg)
IOError: [Errno 11] Resource temporarily unavailable
Could it be a problem wit
Hi.
I'm using freevo-1.9.0 and I have a problem seeing photoes. I think it is
related to the size of the images.
I have folders with lots of files not very big, and I can see all of them.
No problem. But I have other folders with bigger files, and freevo crashes
when I try to see them. It doesn't
On Saturday 21 March 2009 12:13:08 John Molohan wrote:
> If I get no response I might ask you to translate and post to
> the Spanish forum if that's okay?
Hi.
It's ok. Just tell it here when you think that you waited enough.
Alberto
-
On Thursday 12 March 2009 23:47:14 John Molohan wrote:
> Any
> Spanish speaker there to take a look and give a translation about what's
> happening with it?
Hi.
The translation in the other post is more or less all the new info available.
I can't translate all the web ;) but as you seem to alrea
On Wednesday 04 March 2009 23:35:42 Philip Tuckey wrote:
> Here is what I am using for a nova-t 500 (on freevo 1.8.1):
>
> #VideoGroup[0]
> VideoGroup(
> group_type = 'dvb',
> desc='DVB viewing',
> vdev=
2009/2/24 Benjamin Lawetz :
> Hi all,
>
> I've recently purchased the Dark Knight DVD. Upon inserting it into my
> Freevo system, Freevo crashed.
>
> Trying to play it in mplayer, the movie never starts. After googling a
> bit, I found out these DVDs are protected by some stupid safety.
Hi.
You
Hi.
I'm trying to use mplayer to see tv (dvb-t). I have a nova-t 500
working and now I'm trying to configure freevo 1.8.3 to use it. I have
this in my local_conf.py:
VIDEO_GROUPS = [
#VideoGroup[0]
VideoGroup(
vdev='/dev/dvb/adaptor0', #For the benefit of lockfiles
adev=None,
input_type='dvb',
i
Hi.
I know this is an old subject for many people, but the question will be new ;)
I have an pundit-r barebone with an igp9100 video chipset. Some people may
know that tv-out is a bit, errr... bad. I have to use an old version of the
ati propietary drivers (fglrx). It doesn't support 3d but it
El Martes, 3 de Febrero de 2009 21:18, Matthias Reichl escribió:
> My freevo box is also running Debian Lenny, but these lines are also
> present with Etch's udev, in /etc/udev/rules.d/udev.rules:
>
> # video devices
> KERNEL=="dvb*", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb};
> printf
he Freevo window.
>
> Once Freevo is started, I can restart FVWM and the style
> Style "Freevo*" NoTitle, NoHandles, BorderWidth 0
> works perfectly. Freevo starts with a different 'name'. The question
> what is it?
>
> Anthony
>
>
Hi.
Why do you need a window manager at all? I feel that you want to have
only freevo running. In this case, you can run freevo with "-fs", that
is, as window manager. You won't have windows with titles, borders,
etc.
Alberto
2009/2/5, Anthony :
> I am running Freevo with FVWM as my window manag
El Martes, 3 de Febrero de 2009 21:18, Matthias Reichl escribió:
> My freevo box is also running Debian Lenny, but these lines are also
> present with Etch's udev, in /etc/udev/rules.d/udev.rules:
>
> # video devices
> KERNEL=="dvb*", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb};
> printf
El Martes, 3 de Febrero de 2009 17:53, Francisco Eduardo Álvarez Solano
escribió:
> You should first try with kaffeine, because it does an automatic scan of
> available channels without any need of tweaking. You will know that your
> card is working properly, though the file that it generates is n
Hi.
>
> Which driver version did you use? The one that shipped with your kernel?
>
Yes, "of course". If it's in the kernel, what else am I going to look for?...
> I'd recommend trying the current hg version from linuxtv.org.
>
> Here's some more information about your card:
> http://www.linuxtv.
Hi.
I've got a dvb-t card, a hauppauge nova-t 500, which is the one with
two tuners and no hardware encoder/decoder.
Well, I've read that it needs some work to make it work, but I still
haven't managed. So here's what I've done. BTW, this is a debian
stable box.
I have these firmwares:
-rw-r--r-
El Domingo, 4 de Enero de 2009 17:25, Duncan Webb escribió:
> How much RAM have you got? you can check with top to see if the system
> is swapping.
Hi.
I have 512 Mb of ram, and the box is a ht pentium-iv. I doubt I'm short...
I'll try to switch off the plugins. Before that, I need to get a keybo
2008/12/9 Alberto Hernando :
> Hi.
>
> I have freevo1.8.3 running, and I've noticed that sometimes it's extremely
> unresponsive. I mean that I may press keys in the remote control or in a
> gamepad, and it takes a lot of time to "do something". Looking at th
Hi.
I have freevo1.8.3 running, and I've noticed that sometimes it's extremely
unresponsive. I mean that I may press keys in the remote control or in a
gamepad, and it takes a lot of time to "do something". Looking at the logs, I
think that the event is delayed for some reason. But if I do cat
El Martes, 2 de Diciembre de 2008 21:17, Joe Hildreth escribió:
> When I start a movie, the audio studders and is behind the movie for
> several seconds, then it catches up and plays fine. Is there a way to fix
> this problem?
Hi.
What do you use to see the movie? Mplayer or xine? Is it a dvd or
El Jueves, 27 de Noviembre de 2008 23:12, Markus Wittenberg escribió:
> I also run freevo cache once a week by cron. But I usually don't have to
> restart freevo after caching.
I run freevo cache everytime I start freevo. I do it in background and I don't
notice anything. It takes just a few sec
El Lunes, 24 de Noviembre de 2008 20:01, Duncan Webb escribió:
> > http://www.cadenaser.com/rssaudio/larguero.html;333
At least this one worked well with the old server, and I have it in netvibes,
if that's a good reference. I can't tell much about the others, because they
weren't updated very
2008/10/19 Alberto Hernando <[EMAIL PROTECTED]>:
> El Domingo, 19 de Octubre de 2008 18:27, Duncan Webb escribió:
>> Need the url of a feed that does not work, to see what the problem is.
>> There have been quite a few changes since 1.6.3.
>
>
Hi.
This is quite an old
El Domingo, 19 de Octubre de 2008 18:27, Duncan Webb escribió:
> Need the url of a feed that does not work, to see what the problem is.
> There have been quite a few changes since 1.6.3.
Hi.
It's not one feed or two what doesn't work, it's the server. I've added the
urls in the examples, and no
Hi.
I had the rss server in freevo 1.6.3 working very well. I've updated to 1.8.2,
with the same configuration, and the rss server doesn't fetch any feeds. I
know that it was "freevo rssServer" and it changed to "freevo rssserver", but
nothing. Before, after starting the server, I could see it
Hi.
I have dedicated freevo box. Because I use it everyday, I was reluctant to
upgrade but I eventually tried it. That's why the big jump from 1.8.2. Most
things work, more or less, but these don't:
- Shutdown does't work. Freevo stops but the machine isn't halted. freevo told
me to change the
El Sábado, 11 de Octubre de 2008 10:11, Scott Serr escribió:
> I'm pretty sure it was this line:
>
> MPLAYER_VO_DEV_OPTS = ' -nofontconfig '
>
> Even though it was put on the command line running, it didn't seem to
> recognized when Freevo was running it. It seems the new version of
> MPla
El Viernes, 10 de Octubre de 2008 09:25, Scott Serr escribió:
> twm -> freevo -> mplayer
> only xv = no video / black
> only sdl = no video / black
> only x11 = no video / black
>
> Now, I decided to do the same test with freevo -fs from console
> only xv = no video / black
> only sdl = no video /
El Viernes, 4 de Julio de 2008 09:02, Omry Yadan escribió:
> >> I found that if I start mplayer from Freevo (1.8) it doesn't play fast
> >> enough, but when if I kill freevo and start it from the command line it
> >> plays fast enough (only if I kill freevo!).
Hi.
This is quite an old thread, I
El Viernes, 10 de Octubre de 2008 08:43, Scott Serr escribió:
> I removed the possibility of xv,sdl,x11 from the
> freevo_conf.py, so now it is JUST xv. No video!
Hi.
In this case, with just two more tries you can know whether you are actually
using sdl or x11. With that cpu usage, I think th
El Viernes, 10 de Octubre de 2008 06:01, Scott Serr escribió:
> In Freevo, playing a
> vob with mplayer I get about 50% CPU used. Great. (HyperThreading is
> turned on, I should turn that off) When I copy and paste the same
> mplayer command from the logs in a minimal twm/X11 session... It use
El Martes, 2 de Septiembre de 2008 01:42, [EMAIL PROTECTED] escribió:
> [EMAIL PROTECTED] patrick]# ircat --config=/etc/freevo/lircrc freevo
> freevo: could not connect to socket
> freevo: Connection refused
> [EMAIL PROTECTED] patrick]#
Hi.
In this case, it is normal, because you killed lircd.
El Lunes, 1 de Septiembre de 2008 16:55, Andreas Dick escribió:
> do you have any /dev/lirc* devices?
Hi.
Do you see anything if you do:
cat /dev/lircd (or lircd0...)
while pressing buttons? At least, you should see something. Not what you would
see with irw, but something.
Alberto
--
Hi.
I've just upgraded a test installation to 1.8.2, and I can't play
videos anymore. I'm using mplayer and I get this:
Traceback (most recent call last):
File "/usr/lib/python2.5/site-packages/freevo/main.py", line 296, in
eventhandler
app.eventhandler(event)
File "/usr/lib/python2.5/sit
El Miércoles, 27 de Agosto de 2008 21:42, Igor Plyatov escribió:
> #EXTINF:0,TV 1000
> udp://224.1.1.40:6000
>
>
> I can watch IPTV on my desktop PC with the VLC player, but how to
> accommodate a freevo PC for this purpose?
Hi.
I don't know how VLC works, but if mplayer works (something li
El Martes, 26 de Agosto de 2008 20:53, [EMAIL PROTECTED] escribió:
> > have you the same problem not using freevo? e.g.: 'mplayer .mp3'
>
> no, it work great.
Hi.
Copy&paste your configuration of the sound, specially AUDIO_PLAYER and
AUDIO_DEVICE.
You should also check the logs. Typically, /tmp
El Martes, 26 de Agosto de 2008 10:16, [EMAIL PROTECTED] escribió:
> i try some mp3, and i have the same problem .
Hi.
Are you using arts in kde? If the answer is yes, disable it or make sure it
uses alsa.
Modern alsa can do dmix out of the box. That means that you can share the
sound card betw
El Viernes, 4 de Julio de 2008 09:27, Omry Yadan escribió:
> Debian Lenny, kernel 2.6.24.
> I compiled mplayer with the default compilation options (from svn, about
> a month ago), after applying the coreavc patch.
>
> I got a few other things running there, including Azureus that could be
> blamed
El Viernes, 4 de Julio de 2008 08:57, Omry Yadan escribió:
> I tried but it didn't seem to make any difference in video freezes while
> playing a full HD movie with freevo.
Hi.
Perhaps, rather than optimizing freevo, you could optimize all your system.
What distro are you using? How do you compi
>
>
> Just given this a test, it looks okay to me.
>
> # freevo prompt
> >>> import pickle
> >>> x = pickle.load(open('/var/cache/freevo/romlist-0.pickled'))
> >>> x.mameRoms.keys
> should print out a list of rom titles.
>
> I'm no games expert, so I don't know what to suggest, have you enough
>
Hi.
I'm trying to setup freevo-1.8.1.
One of the problems I've found is with the mame cache. I get a file
romlist-1001.pickled in my cache of 794 kb. It is incomplete, because I see
in the logs that it first scans the directory and then tries to generate the
cache, ending like this:
Hi.
I've just discovered that I can have special configurations for certain
files using fxd files. I'm trying to use it to create menus for my dual
films, so that I have a message with the name of the track, rather than just
a number. The same goes for subtitle. Here's a example of an ogm file
con
El Viernes, 1 de Febrero de 2008 22:43, Adam Charrett escribió:
> This encoded video/audio is carried in an MPEG2 transport
> stream, this is used even if the video is MPEG4 encoded.
Ahhh... This was the detail that I didn't know. Now it is pretty clear that
while the transport doesn't change, th
Hi.
I have a dvb related question. Not directly related to freevo, but, depending
on the answer, it might be in the future. I'm doing this question here
because some people might now and, who knows, depending on the country it
might be important.
My question is about dvb-t, the standard behind
El Domingo, 27 de Enero de 2008 22:30, Elizabeth Dodd escribió:
> the hauppauge-pvr-500 won't do dvb-t.
> http://www.hauppauge.com/pages/products/data_pvr500mce.html
Ahh!!! I always thought that pvr-500 was for dvb-t. In this case, perhaps
wintv nova t-500 (also from Hauppauge) is really the same
Hi.
Finally, it seems that I'll have dvb-t at home. So I'll have to get dvb-t
card. I was thinking in in hauppauge-pvr-500, which is like two pvr-150. It
can encode to mpeg2, but can't decode mpeg2 from the hard disk. For
divx/xvid/mkv... the cpu is needed, so any card is the same. Am I right
2007/11/6, Rahul Gosavi <[EMAIL PROTECTED]>:
>
>
> Hi All,
>I am using Fc4 for freevo. I am able to watch TV through
> mplayer properly.But when I try to get live tv from freevo it shows
> "Channel
> Has No Data Loaded" if I pressed enter it shows blank screen and again
> come
> t
Hi.
I'm trying to play some ogm videos with multiple audio tracks and I've
noticed that freevo doesn't handle them right. Mplayer uses -aid to select
the audio track, and according to the man pages, thet are 1, 2, 3, etc. But
actually, my tracks are 0, 1, 2... I've checked this with a dvd ripped w
El Jueves, 6 de Septiembre de 2007 12:29:15 escribió:
> thx for the elaborate clarification, very useful :) one question remaining
> though, let's say i use dvb-t and let's say there are four chans in one
> stream, let's assume i have the digital card with one tuner, as you already
> said, given th
El Miércoles, 5 de Septiembre de 2007 23:16, escribió:
> hi alberto :)
> thx for your informative reply on the freevo list, but i have another
> question, which imho is not really directly about freevo, so i thought, i'd
> try and contact you directly, hope u don't mind ;)
>
> > Some cards have two
El Wednesday 05 September 2007 14:09:06 Jody Gugelhupf escribió:
> how is it with digital tv tuner cards can they record more then one program
> at the same time or not? if yes which one would be a good product for
> DVB-S, DVB-T, and DVB-C?
Hi.
Some cards have two receivers/tuners. It's just lik
El Monday 03 September 2007 20:45:13 Gorka Olaizola escribió:
> How do you copy the DVD? If you copy the files it won't work. You should
> use an application like dvdbackup for this purpose.
> Use dvdbackup -M and it should work. Aditionally if you have libdvdcss
> the backup will be unprotected du
Hi.
I have a question about how freevo manages dvd's. If I use a real dvd, no
problem, freevo plays it (rather, xine plays it). But now I'm trying to copy
dvd's to the hard-disc. In some cases, freevo knows that a folder has another
video_ts folder, and shows it as dvd, like a real disc. But in
El Thursday 23 August 2007 19:49:51 Duncan Webb escribió:
> What does /tmp/roms contain, reasonable data or junk?
>
> > The same roms don't generate any error in freevo 1.6.2. Any idea? I have
> > no clue about this log.
>
> Not a big games player but I do have a couple of roms and it doesn't
> cra
Hi.
I'm trying to run freevo-1.7.3. I have a crash with mame, while generating
the cache. In /tmp/freevo/main-1001.log I get this:
Call MAME command : /home/freevo/bin/mame
updating via listxml
Traceback (most recent call last):
File "/usr/lib/python2.5/site-packages/freevo/main.py", line 288,
Hi.
A few monts ago, I started a discussion here about my moving to lfs from
debian for my box running freevo. It took me some time, but I've done less
work than I wanted.
What works:
- It boots :) Using LFS-6.2, I got my system booting with little problems. I
then compiled x.org-7.2 accordin
Hi.
>
> You should have a recordserver, webserver and encodingserver.
>
> The only thing that I can think of is TwistedWeb, you must use 2.4.0 as in
> 2.5.0 they removed internet app but this would not stop them being built.
Very good. I installed twistedweb 2.4.0 and the servers are running. I d
Hi.
> > - I can't use the cd, i always have "no action defined". No more messages
> > in the logs.
> >
>
> I'm guessing here but maybe it's not recognised as an audio cd my kaa
> metadata. Try mminfo /dev/cdrom
Well, this one was my fault. A mistake in /etc/fstab.
>
> > - recordserver, webser
Hi.
After some time using freevo-1.6.2, I'm trying to upgrade to 1.7.2. I'm doing
it in a new partition with LFS, so I'm installing everything from source. I'm
using my old local_conf.py as a base, so I have already more or less what I
want, but I have some problems:
- I can't use the cd, i alw
El Lunes, 25 de Junio de 2007 13:20, Jody Gugelhupf escribió:
> sorry guilty as charged ;) will be more carful in the future, btw came
> around to finish the wiki site today for the TV recording stuff, hope it
> will be ok that way it is... thx again to u and duncan for the help :)
Hi.
Top postin
El Thursday 29 March 2007 08:15:53 Duncan Webb escribió:
> I assume you are talking about recording and if so what do you expect
> freevo to do when there is no programme information available?
This is not about recording. You really can't watch any tv channel when the
guide is corrupt.
Alberto
El Martes, 27 de Marzo de 2007 15:19, Jason Tackaberry escribió:
> > directfb don't need/want X running. IIRC in the wiki it suggests using
> > ratpoison as window manager, this works well for a dedicated box as it is
> > so light weight.
> >
>
> Why use a window manager at all?
You don't need
El Monday 26 March 2007 12:32:17 Jaap Struyk escribió:
> I created a dedicated user freevo in /srv/freevo with all of it's media
> inside there and use attached startup script.
> For fast boot only load what you need for freevo and then start freevo
> with the script, so networking/lirc/tv-card/sou
El Monday 26 March 2007 15:31:44 Buckley Hopper escribió:
> > That's interesting. I have an ati radeon 9700 pro in mine, and with the
> > stock xorg drivers with debian etch, I couldn't get tv out working (I
> > believe support is not included yet).
>
> Oh, just realized you meant the ati propriet
El Monday 26 March 2007 09:46:42 Michel Hoogervorst escribió:
> Something like this?:
> http://recordmydesktop.sourceforge.net/
Right! This is what I was looking for.
Now I just have to test it...
thanks
Alberto
-
T
Hi.
Recently, I've seen somewhere a software to record an X session. I know about
xvidcap, but it eats a lot of cpu. The software I saw used some layer of the
X protocol, and it sounded to be quite good. I thought that I had seen it
here, but I can't find it. But I've seen the video of freevo2,
Hi.
I have freevo 1.6.3 running in a debian box. I'm quite happy with it, but I'm
also a LFS user, so I want to switch to LFS to run freevo. Why? Well, LFS is
less bloated and my feeling is that it runs faster. LFS users understand
me...
The point is that I have a spare partition in my freevo b
El Domingo, 25 de Febrero de 2007 23:44, Jim Duda escribió:
> I'm running freevo on a FC5 installation. I'm having trouble disabling
> the Xorg dpms feature. I'm using an nvidia FX 5200 card with the binary
> nvidia drivers from nvidia. After some amount of time, my TV-out
> display goes dark.
El Wednesday 07 February 2007 03:32:29 Christopher Bland escribió:
> However, I
> cannot seem to play any of my videos which are MPEG-2 HD format. I have
> an HD tuner on my "server" (which is a Mac) so all of my non-DVD videos
> are MPEG-2 HD. I can play these back successfully with VLC but not in
El Miércoles, 24 de Enero de 2007 20:26, Pascal Schirrmann escribió:
> I'm using a PVR-350 card on my freevo box.
> The system is based on a Mandriva 2007.
> I setup the PVR card as a X display, and start freevo with the -fs option.
>
> I'm really impressed by the picture (and our TV, a 82 cm / 32"
El Miércoles, 24 de Enero de 2007 11:49, Elizabeth Dodd escribió:
> bought a PVR-350 and have ivtv 0.4, and have tuneable video.
> The sound out appears to be separate cables for L and R, and I only have
> stereo connectors lying around the house.
> Is there a way to get the sound direct from the c
El Miércoles, 27 de Diciembre de 2006 23:24, Stephen Rowles escribió:
> dvbstream can be used to multicast out the all the pids on given frequency.
>
> Could the record sub-system be changed instead of recording using
> mplayer to dump one channel, dvbstream could be used to tune to the
> requested
El Sábado, 23 de Diciembre de 2006 06:58, Duncan Webb escribió:
> You may need to run freevo cache --rebuild this should recreate the
> whole cache. Nothing has changed much with the cache but any code change
> may impact the cache. Which means that the cache should be rebuilt after
> an upgrade.
>
Hi.
After some problems with 1.6.1, I decided to give 1.6.2 a try. Everything
seems to work well, but a I have a question.
In 1.5.4 everytime I entered a new folder, I saw the "Scanning folder" message
(more or less, I see it in Spanish). And if the folder never changed, I never
see that messag
El Domingo, 17 de Diciembre de 2006 22:05, Duncan Webb escribió:
> rss server is in the 1.7.0rc1 release, not in 1.6.0.
Oh, Thanks.
I messed things... But, seeing that 1.6.1 has some bugs too, would you suggest
me using 1.7.0rc1? It has some interesting features. Does it work with python
2.4?
Hi.
I'm tryin to upgrade my freevo-1.5.4 box to 1.6.1, and I've run into some
problems:
- I can't build mmpython-0.4.10. I can't post here any logs, because I've lost
the net connection to the box, but I get a gcc error. It's using debian
sarge. So I'm using the old mmpython-0.4.8 (9?). Freevo-
2006/11/15, wout clymans <[EMAIL PROTECTED]>:
I have the same problem, really annoying!
Hi.
You can configure it. Pressing E on the folder, you can configure it (it's
an option). There, you can choose using MediaId tags or not.
Alberto
--
1 - 100 of 209 matches
Mail list logo
