Does the FTP Client in VM allow you to transfer to a SFTP site and if so is
there a redbook on this process possibly?
Larry Davis
Company(r), Mid-West National Life Insurance Company of TennesseeSM and The
MEGA Life and Health Insurance Company.SM
-Original Message-
From: The IBM z/VM Operating System
[mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Davis, Larry
(National VM/VSE Capability)
Sent: Monday, July
REXEC is available in Linux but you will get Auditors screaming about it.
We got a wavier at our site.
You can use IPTABLES to restrict REXEC access from/to certain systems.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Consulting
Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com 7/22/2011
12:34 PM
REXEC is available in Linux but you will get Auditors screaming about it.
We got a wavier at our site.
You can use IPTABLES to restrict REXEC access from/to certain systems.
Larry Davis
-Original
there in SLES 11
SP 1. But that could have been due to the patterns I selected at install
time.
So everything is working finefor now.
Thanks
Tom Duerbusch
THD Consulting
Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com 7/22/2011
1:07 PM
The service is called exec
No One Controller can handle all the VSWITCHES you may want to create. I would
create at least to Controller and code all your VSwitch definitions with a
CONTROLLER * and two RDEV devices. Also you can use VLAN's to reduce the number
of Ports and isolate the traffic through a switch.
Larry
The HMC or SE has the ability to do this, or used to so a ESCON port could be
sparred over to another port.
That way you did not have to code it in the IOCP.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Sherry
who
instilled in me the values that have carried me this far. -- former U.S.
Representative Anthony Wiener, during his resignation speech
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Davis, Larry (National VM/VSE Capability)
Sent: Thursday, July 21, 2011 12
OSA 3 cards are funny in the way they activate a port, the best I can tell is
you define the CHPID, CONTROL UNIT, and DECIVICES without regard for the
specific port. The Port is determined by the TCPIP Device and Link statement or
the VSWITCH RDEV statement.
Your question is difficult to answer
I Believe Flashcopy uses DDR, if Flashcopy is not available on the subsystem,
But that was a while ago.
Larry Davis
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Scott Rohling
Sent: Thursday, June 16, 2011 4:16 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re:
Were you IPLing the system at the time. 1010 usually means it could not find
the console.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Burton, Randy
Sent: Tuesday, June 14, 2011 9:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Be careful an IODF is different than the IOCDS for HSA.
An IODF is a file that gets put on your PARM disk and is referenced in your
SYSTEM CONFIG file.
There are people here that can fill in the blanks, but if you have a z/OS LPAR
on the same box as the z/VM LPAR let z/OS handle changes and
We received this Disabled Wait state from a z10 processor we are trying to IPL
a zVM 6.1 system that was dumped and restored from an MVS system on to new DASD.
Central processor (CP) 0 in partition LPLH, entered disabled wait state.
The disabled wait program status word (PSW) is
@LISTSERV.UARK.EDU
Subject: Re: Disabled Wait state not in the CP Messages and Codes Manual
Are you sure you have IPL text on that volume?
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Davis, Larry (National VM/VSE Capability)
Sent
Wait state not in the CP Messages and Codes Manual
PS...it's a hardware function, that's why you don't see it in the z/VM
system codes manual.
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Davis, Larry (National VM/VSE Capability)
Sent
Can you have a RIP2 Network configuration using MPROUTE on zVM 6.1 and an ARP
takeover process for a zLInux subnet using a VSWITCH and TCP/IP Controllers on
INTVM?
We see the IP Addresses for the zLinux on the OSA but the network people say
they don't see the IP Addresses associated with the
Are you Running VM on this or zLinux only on an LPAR?
Larry Davis
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Carlos Bodra - Pessoal
Sent: Wednesday, April 20, 2011 6:19 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: z/VM RedHat Virtual Machine Memory abend
Hi
Em 20/04/2011 19:24, Davis, Larry (National VM/VSE Capability) escreveu:
Are you Running VM on this or zLinux only on an LPAR?
Larry Davis
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Carlos Bodra - Pessoal
Sent: Wednesday, April 20, 2011 6:19 PM
To: IBMVM
Memory abend
q stor
STORAGE = 48G CONFIGURED = 48G INC = 128M STANDBY = 0 RESERVED = 0
Ready; T=0.01/0.01 20:33:09
No xstore defined.
Carlos Bodra
IBM Certified Specialist System z
Sao Paulo - Brazil
Em 20/04/2011 20:04, Davis, Larry (National VM/VSE Capability) escreveu:
What is your
There Goes the Neighborhood.
Larry Davis
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Carlos Bodra - Pessoal
Sent: Tuesday, April 12, 2011 8:15 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: IBM Announcements Today
z/VM is charged for all GP and IFL's on the box only if it is also running on
the GP's and not just on the IFL's.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Hughes, Jim
Sent: Friday, April 01, 2011 3:32 PM
To:
It should show Connect rather than Active
You have started the connection on the VM side, make sure the corresponding CTC
on the MVS side is defined to MVS as BCTC if using ESCON and then start the MVS
Line
Also make sure that the RSCS definition for the JES NODE name matches and the
buffer is
Are you using the same or New Network connections to the network. Make sure the
two OSA ports are not cross connected at the switch. If they are TRUNC'd
together then you will have routing issues.
Just get a new set of IP's to test with on the new box, and get your network
and firewall people
In the VM SYSTEM CONFIG file you can enable the auto Warm IPL parameter and if
the system was properly shut down then it will start automatically you may need
to clear the screen once or twice until the TERM MORE 0 0 HOLD OFF takes affect
Larry Davis
From: The IBM z/VM Operating System
When VM is using an IODF and MVS is on the box doesn't the changes show up in
VM when the IODF is activated in HCD?
I though the Dynamic commands in VM only needed to happen if you are using an
IOCDS and IOCP to maintain the HW.
When the Hardware Configuration(HAS) matches the loaded IOCDS and
VM HCD will not activate and do all the dynamic commands in VM environment. You
can use HCD to manage the IOCP but you will have to perform the dynamic
commands and activate the new IOCP
Larry Davis
-Original Message-
From: The IBM z/VM Operating System
Seeing your VMTAPE TMC is an OS Formatted TMC you will have to get the MVS side
to do the work and verify that VMTAPE can see the change
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Imler, Steven J
Sent: Wednesday, November 03, 2010 7:23 AM
To:
Do a QUERY OSA ALL and send the results
You need at least 3 OSA devices for the Stack to operate.
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Leon Buitendag
Sent: Tuesday, November 02, 2010 2:35 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: IPWIZARD
: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Davis, Larry (National VM/VSE Capability)
Sent: Tuesday, November 02, 2010 1:47 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: IPWIZARD
Do a QUERY OSA ALL and send the results
You need at least 3 OSA devices for the Stack
No this actually requires a real CTC, if you have a test system, and have a
spare CTC device address Then you are OK, but connecting 1st Level to 2nd
Level, I believe, for ISFC is not supported.
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Mark
You need the Service Machines DFSMS the Maintenance ID, and RMSMASTR at a
Minimum to interface to the IBM Tape Library.
IBM and Computer Associates (CA) offer Service Machines to manage tape
Libraries, and Mounting tapes in the background for user requests.
Larry Davis
From: The IBM z/VM
make sure the ID is in the DGTVAUTH DATA file in the VMSYS:DFSMS.CONTROL.
directory
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Sergio Lima
Sent: Tuesday, September 28, 2010 5:41 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: DFSMS master not
Use Putty to connect to 172.17.71.121
When prompted for the user ID enter root
And when prompted for the password enter the password you supplied when you
configured the client.
Putty can be downloaded from many places try here
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Make sure the firewall allows port 22 and that the netmask at the switch allows
addresses to the OSA
If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and
paste the response here.
Also , if you are using a VSWITCH did you authorize the client (VM user ID)
access to
.
On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability)
larry.dav...@hp.commailto:larry.dav...@hp.com wrote:
Make sure the firewall allows port 22 and that the netmask at the switch allows
addresses to the OSA
If you are using a VSWITCH enter the command Q VSWITCH switch name
First I am installing SLES 10 SP 2 Linux on z/VM 5.4
When Setting up CKD DASD for Linux on z/VM it asks about using DIAG on the
Activated DASD.
Was this the Older method for accessing CKD DASD?
What is the best Linux File system to use under z/VM. Ext2, ext3, Reiserfs?
Larry Davis
VM Capability
ext2 and lose the journaling. Reiser has had issues in the past (
I think it ate at least one persons files) and there is uncertainty about its
future.
Marcy
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Davis, Larry (National
It may be that you have everything correct and you just left out the LPAR
Access List information. All Modern Mainframes are in LPAR mode, so this may be
required.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Rich
Thanks You
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Suleiman Shahin
Sent: Thursday, August 12, 2010 5:03 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: DTCSS022E
That's more of a dilemma :(
I did not do that part
Look into setting up a single VSWITCH that is owned by DTCVSW1 and DTCVSW2 and
connect each of the z/OS systems to the switch using the NICDEF statement in
the user directory
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Charles Grady
Sent:
Try SET CONFIGMODE ON and see if you can do Dynamic configuration
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Tuesday, June 15, 2010 2:09 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Dynamic I/O question
Okay, the person
VARY OFF SUBCHANNEL 5AB0-5ABF
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Tuesday, June 15, 2010 2:09 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Dynamic I/O question
Okay, the person that put together our IOCP made an
.
Otherwise, each command enters and exits configuration mode at the beginning
and ending of each dynamic I/O command.
Frank M. Ramaekers Jr.
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Davis, Larry (National VM/VSE Capability
VARY OFF CHPID 99
This will complete the CHPID offline, all you did was very off path 99 from all
the devices. Also if you need to make dynamic IO changes you may need to VARY
OFF the SUBCHAN
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of
I hope so this is, it is way overdue in my opinion.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Bill Munson
Sent: Tuesday, May 25, 2010 10:19 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: CA VM:Director
Not yet
Maybe
Not holding Breath, but hoping
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Marcy Cortes
Sent: Monday, May 24, 2010 5:37 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: IBM to buy Sterling Commerce
Do you have a single ID that owns all the shared DASD using Full Pack MDISK
statements using the MWV Mode, and do all the z/OS guest link to these disks
using just MW?
Or do all the z/OS guest have the FP MDISK statements with the MWV mode?
Larry Davis
From: The IBM z/VM Operating System
OSA 3 devices require the PORTNUM option on the VM Link and Device Statement
Are you using a VSWITCH to connect your Linux images or are you using a direct
connect method.
Larry Davis
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Mark Pace
Sent: Monday,
[mailto:ib...@listserv.uark.edu] On
Behalf Of Davis, Larry (National VM/VSE Capability)
Sent: Friday, January 22, 2010 10:02 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Capturing output from SMSG command
I am sending an SMSG request to RSCS and want to capture the output in a
PIPE to parse and output
doesn't help you... RSCS replies with MSG so
that's what you're trying to capture.
Scott
On Fri, Jan 22, 2010 at 9:27 AM, Davis, Larry (National VM/VSE Capability)
larry.dav...@hp.commailto:larry.dav...@hp.com wrote:
Thanks everyone and Yes I was setting SMSG to IUCV and then SETTING to OFF
I bet you will be happy when z/VM 6.1 is installed and the Single image
facility is ready for production.
Larry Davis
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Robert J McCarthy
Sent: Monday, November 16, 2009 4:08 PM
To:
Make sure it is a LINK to MAINT’s 123 as 1A0 RR
LINK MAINT 123 1A0 RR
Verify the name in the VMACCT CONFIG file on VMACCT 191 you should see a
statement like this toward the top
DIRECT 1A0 540RES
If yours does not say 540RES than you need to change it to match the VOLSER of
52 matches
Mail list logo
