Re: New video of design elements (roping on a tapped)

e show of you cutting up a piece of > wood with an angle grinder! LoL! > > > > Thanks for sharing. > > Mac > -- > ------ > > -Original Message- > From: > Sent: Oct 8, 2023 10:29 PM > To: Legacy ornamental mills > Subject: New video of des

Re: New video of design elements (roping on a tapped)

> -- > > -Original Message- > From: > Sent: Oct 8, 2023 10:29 PM > To: Legacy ornamental mills > Subject: New video of design elements (roping on a tapped) > > > Thank you Bill for posting this for me. > > I am using my 200. Cuttin

Re: New video of design elements (roping on a tapped)

reat video! (How many do you have? - dogs that is.) By the way - we also enjoyed the side show of you cutting up a piece of wood with an angle grinder!  LoL!   Thanks for sharing. Mac -Original Message- From: Sent: Oct 8, 2023 10:29 PM To: Legacy ornamental mills Subject: New video

Re: New video of design elements (roping on a tapped)

ornamental mills Subject: New video of design elements (roping on a tapped) Thank you Bill for posting this for me. I am using my 200. Cutting a rope on a tapper using my angle grinder as the cutting tool. Everything done here could be done on any Legacy modal if the user is cutting for

Re: New video of design elements (roping on a tapped)

I refer to that same capability in my shop as modularity. That principle is used in many areas in my shop from storage to workbench accessories. Yes, it's important, me thinks, to be able to move a spindle from lathe to LOM without mismatch by using similar mounting methods. It's a good

Re: New video of design elements (roping on a tapped)

(Sorry guys!) Here is a side note on the same topic. Uniformity, in my shop is the goal.  NO ONE machine is the best ,for everything. I have set my shop to work with "ALL" the same equipment. I cantake a spindle and move it to the lathe or either of my Legacy's with outchanging anything. So I

Re: New video of design elements (roping on a tapped)

Hello Jeff Thank you.And Yes I am having fun, playing with this new toy. ;-) "O" I forgot to tell everyone, that when and if I choose to put a router back on my 200, I have another Z axis for it, with a router already mounted, So change over will only take a min. to do. But for the time being,

Re: New video of design elements (roping on a tapped)

Thanks for sharing Curt.It looks like you are having fun with your 200 hybrid. Nice. Jeff from Connecticut Sent from my iPhoneOn Oct 8, 2023, at 10:29 PM, 'Curt George' via Legacy Ornamental Mills wrote:Thank you Bill for posting this for me.I am using my 200. Cutting a rope on a tapper using

Re: New video of design elements (roping on a tapped)

That's pretty cool, Curt. If I were younger, I could get the wants real bad for some of that old time OT stuff. DanK On Sunday, October 8, 2023 at 11:20:20 PM UTC-4 Curt George wrote: > Hey Dan > > a few other little tid-bits. > > the grinder cutting angle is like you noted. 90 deg. so the

Re: New video of design elements (roping on a tapped)

Hey Dan a few other little tid-bits.  the grinder cutting angle is like you noted. 90 deg. so the cuts look a littledifferent form what I router will make, but it also gives you the look of an Ornamental turning of the past. this (I think) is due to the type of cutters mostOT machines use. 

Re: New video of design elements (roping on a tapped)

Hello Dan the profile was cut to the pattern of the template.once set, I can finely adjust the cuts depth. then the cut following the templatewill only cut to the depth it was set for. Yes on a very big profile change the cut will be somewhat angled. but for most of what I am doing, this is

Re: New video of design elements (roping on a tapped)

I was greatly confused...it doesn't take much. I couldn't decide if it was supposed to be "taper" but when the workpiece came off, it was clear it could be a tapper handle. But I'm guessing out of ignoranceI don't frequent places that use tappers, so my vocabulary has been enhanced (again).

New video of design elements (roping on a tapped)

Thank you Bill for posting this for me. I am using my 200. Cutting a rope on a tapper using my angle grinder as the cutting tool.Everything done here could be done on any Legacy modal if the user is cutting form the side of the work piece.   The angle grinder dose a good job removing the wood,

Re: New video on bone turning

sounds good Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Aug 20, 2023 at 9:15 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>

Re: New video on bone turning

-Original Message- From: Sent: Aug 20, 2023 9:55 PM To: Subject: Re: New video on bone turning   Hey Curt, Super excited to view the whole thing for sure. I watched a bit to get it started. Very good. Stay tuned.  Kind Regards,Timothy J. ZieglerOn Sun, Aug 20, 2023 at 3:22 PM 'Curt

Re: New video on bone turning

Thank you Tim. I was asked in a private e-mail to show the hole process. So I figured I would.Now I am planning to do a video, On Adding details to a spindle,  The idea will be to make three or four of the same spindles/profile and then using the Legacy/ my 1000ex.  I plan to cut a rope on a

Re: New video on bone turning

with respiratory issues breathing all that bone dust! Cheers! Mac -Original Message- From: Sent: Aug 20, 2023 9:55 PM To: Subject: Re: New video on bone turning Hey Curt, Super excited to view the whole thing for sure. I watched a bit to get it started. Very good. Stay tuned. Kind Regards

Re: New video on bone turning

Very nice Curt. Great video too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Aug 20, 2023 at 6:28 PM 'Curt George' via Legacy Ornamental Mills <

Re: New video on bone turning

Hey Curt, Super excited to view the whole thing for sure. I watched a bit to get it started. Very good. Stay tuned. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Aug 20,

Re: New video on bone turning

Good video, Curt. On Sunday, August 20, 2023 at 4:22:33 PM UTC-4 Curt George wrote: > There is no talking, only music and turning. > I Thought I would try something new. > Please let me know what you think? > > https://www.youtube.com/watch?v=qKMimY9JGk8 > > C.A.G. > -- You received

New video on bone turning

There is no talking, only music and turning.  I Thought I would try something new.Please let me know what you think? https://www.youtube.com/watch?v=qKMimY9JGk8     C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To

Re: new video

> *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: new video > > > > Wow Bill you are the man! Thanks so much for doing that. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Fo

RE: new video

Subject: Re: new video Wow Bill you are the man! Thanks so much for doing that. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Oct 11, 2022 at 3:00 PM mailto:bulke...@mmnet.co

Re: new video

hannel=aussiman77181 > > > > Bill > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue > *Sent:* Wednesday, 12 October 2022 2:08 AM > *To:* legacy-ornamental-mills@

RE: new video

an77181> =6s_channel=aussiman77181 Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of M.W.Foscue Sent: Wednesday, 12 October 2022 2:08 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: new video Bill, MANY MANY THANKS! for what you have done. A lot of f

Re: new video

ividual emails. > > > > Thanks again. > > Mac > -- > -- > > > > -Original Message- > From: > Sent: Oct 11, 2022 9:17 AM > To: > Subject: RE: new video > > > > You are welcome there are 4 vid

RE: new video

having to fiddle with four individual emails. Thanks again. Mac -Original Message- From: Sent: Oct 11, 2022 9:17 AM To: Subject: RE: new video You are welcome there are 4 videos now Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cole Sent: Tuesday, 11 October 2022

Re: new video

p; Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Fri, Sep 30, 2022 at 10:44 AM wrote: >> >>> Ok guys I just made a new video

RE: new video

You are welcome there are 4 videos now Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cole Sent: Tuesday, 11 October 2022 11:02 PM To: Legacy Ornamental Mills Subject: Re: new video thank you I sure could use a refresher of sorts . On Friday, September 30, 2022

Re: new video

ecialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Fri, Sep 30, 2022 at 10:44 AM wrote: > >> Ok guys I just made a new video https://youtu.be/7ZrQhmNmlqU >> &g

Re: new video

pecially with my revo not quit up to >>> scratch but I think its ok now. >>> >>> The wood its only crappy old pine But im not doing them for looks >>> hopefully a 3 start rope will be the next >>> >>> >>> >>> Bill >>> >>> >>> >>>

Re: new video

ok now. >> >> The wood its only crappy old pine But im not doing them for looks >> hopefully a 3 start rope will be the next >> >> >> >> Bill >> >> >> >> >> >> >> >> >> >> >>

RE: new video

Bill, Like Tim Z, - I REALLY appreciate you making the videos!! You do great work with the videoing! Thanks again! Mac -Original Message- From: Sent: Oct 1, 2022 10:41 PM To: Subject: RE: new video Yea at least if I make a few and post them there is no copy right problems not sure how

Re: new video

Behalf Of *Tim Ziegler > *Sent:* Sunday, 2 October 2022 12:42 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: new video > > > > Bill, your work is outstanding and we all appreciate your knowledge and > expertise at it. > > You're the first one will

RE: new video

crappy old pine But im not doing them for looks hopefully a 3 start rope will be the next Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Sunday, 2 October 2022 12:42 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: new video

Re: new video

glegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Hutley > *Sent:* Saturday, 1 October 2022 10:37 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: new video > > > > I just watched the single start barley twist -outstanding

Re: new video

t; Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue > *Sent:* Saturday, 1 October 2022 5:23 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: new video > > >

RE: new video

: Saturday, 1 October 2022 10:37 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: new video I just watched the single start barley twist -outstanding. You show every step, in detail. I am a beginner (still) and have made barley twists the traditional way - through a frustrating process

Re: new video

gt; From: legacy-ornamental-mills@googlegroups.com > On Behalf Of M.W.Foscue > Sent: Saturday, 1 October 2022 5:23 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: new video > > > > Bill, > > > I wholeheartedly agree with Tim -

Re: new video

-ornamental-mills@googlegroups.com On Behalf Of M.W.Foscue Sent: Saturday, 1 October 2022 5:23 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: new video   Bill,   I wholeheartedly agree with Tim - you did an EXCELLENT job producing that video! (Look out! - Steven Spielberg!  Bill's

RE: new video

To: legacy-ornamental-mills@googlegroups.com Subject: Re: new video Bill, I wholeheartedly agree with Tim - you did an EXCELLENT job producing that video! (Look out! - Steven Spielberg! Bill's coming at you! LoL!) That is one thing that we all are missing out on - basic and intermediate

Re: new video

llywood" producers!) Mac -Original Message- From: Sent: Sep 30, 2022 1:28 PM To: Subject: Re: new video Hey Bill, thats awesome, that you took the time to make a good detailed video for the new LOM owners. Its always good to see details like that. The length is fine. you get good co

Re: new video

. Stay tuned as I finish it up. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Sep 30, 2022 at 10:44 AM wrote: > Ok guys I just made a new video https://youtu.be/7ZrQhmNmlqU > > >

new video

Ok guys I just made a new video https://youtu.be/7ZrQhmNmlqU It's the first in a series I'm going to try and do on showing newbees basic milling techniques The first is turning a blank to a size and boy did I have trouble with it everything went wrong >From machine breakdowns to loos

Re: Not a new video,but one that is new to me

-mills@googlegroups.com[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Thursday, 4 July 2019 11:00AM To:legacy-ornamental-mills@googlegroups.com Subject: RE: Not a new video,butone that is new to me   Bill, Not a problem.  I certainly was notmeaning to make you feel bad

RE: Not a new video,but one that is new to me

] On Behalf Of MWF Sent: Thursday, 4 July 2019 11:00AM To:legacy-ornamental-mills@googlegroups.com Subject: RE: Not a new video,butone that is new to me   Bill, Not a problem.  I certainly was notmeaning to make you feel bad for posting it.  In fact, it was probably a"good thing" -

RE: Not a new video,but one that is new to me

Subject: RE: Not a new video,but one that is new to me Bill, Not a problem. I certainly was not meaning to make you feel bad for posting it. In fact, it was probably a "good thing" - in that I learned there are folks out there that have a LOT of free time on thier hands - and, unf

RE: Not a new video,but one that is new to me

it.Thanks you for your comments back in any case.  I did not mean to imply any bad feelings towards you OR Curtis.  Cheers!Mac-Original Message- From: Bill Bulkeley Sent: Jul 3, 2019 5:40 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Not a new video,but one that is

RE: Not a new video,but one that is new to me

it from me. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Thursday, 4 July 2019 3:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Not a new video,but one that is new to me Curtis, Bill

Re: Not a new video,but one that is new to me

nt: Jul 3, 2019 10:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Not a new video,but one that is new to me Bill this guy has some very BAD videos,( Which I find funny. but they are no joking matter.) I am surprised that Legacy has not had some kind of legal slander suite

Re: Not a new video,but one that is new to me

I bet it was this one  https://www.youtube.com/watch?v=9oZ_GsOBqnY   Bill   From:legacy-ornamental-mills@googlegroups.com[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Wednesday, 3 July 2019 9:45PM To: Legacy Ornamental Mills Subject: Re: Not a new

RE: Not a new video,but one that is new to me

I bet it was this one https://www.youtube.com/watch?v=9oZ_GsOBqnY Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Wednesday, 3 July 2019 9:45 PM To: Legacy Ornamental Mills Subject: Re: Not a new video

RE: Not a new video,but one that is new to me

Nice find curt I have never seen that one before either Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Wednesday, 3 July 2019 3:35 PM To: Legacy-Ornamental-Mills Subject: Not a new video,but one that is new to me Hello

Re: Not a new video,but one that is new to me

Try this: https://www.youtube.com/channel/UCgAcEv2QjfsjKGWcUO0cgMg. Not sure if it's the one you're talking about but it does cover some history of the company. Starts a bit slow (i.e. getting into the story) but is interesting if you stick with it. Hope this helps. Ray On Wed, Jul 3, 2019

Re: Not a new video,but one that is new to me

It is me again about this video that Curt has put on Every time I click on the video and move it to the finish a different video come up I have done it 5 times and have not seen the video about Legacy again. It was all about his experience with Legacy Richard On Wednesday, July 3, 2019 at

Not a new video,but one that is new to me

Hello Everyone.  Lots of work, so little time,Summer is here already, for me between Work and home, there is so much to do, before I go on Vacation at the end of the Month. I hope everyone has a very nice Independence day (4th of July ,USA)   I have some projects in the works. (so something new

LAST NEW Video

you can see this newest video at: https://www.youtube.com/watch?v=Pc57N_nYqi4 It's not about the LOM, so this will be my last announcement about any videos I make that are NOT about the LOM. in the future I will be announcing only new LOM videos on this forum. This video is a good tip

Re: new video on on the legacy

a softer set screw wouldn't hurt if it makes you feel better. I can't speak for head stocks on all LOM's but mine seems to be hardened. i see no marks on the surface as of this morning. the set screw touches the surface beyond the threads so it is getting a good bite without having to over

Re: new video on on the legacy

Your runout results are interesting. YMMV (your mileage may vary). My only concern about using a set screw for the average Joe, is that a cup point is used. The holding power would be excellent, but it will damage the spindle by biting into the spindle. A small circle is embossed in the

Re: new video on on the legacy

Tim, thanks for your comments I agree the locking collar with a pin is an excellent idea and effective. I said awhile back (I think on my face plate video) that a 1"-8 TPI nut cut down to make narrow to fit on the head stock threads would be an adequate solution. You pin idea on the locking

RE: new video on on the legacy

> > Bill > > > > From: legacy-ornamental-mills@googlegroups.com > [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of russ veinot > Sent: Friday, 8 December 2017 8:34 AM > To: Legacy Ornamental Mills > Subject: new video on on the legacy > &g

Re: new video on on the legacy

Bill, first, there is zero deflection from the set screw, The machined thread tolerance is critical or the chuck would be useless in the first place. second, the set screw is not in the thread area at all. the threads are recessed at the back so the set screw touches only the shaft and not a

RE: new video on on the legacy

be better without having to loosen the chuck Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of russ veinot Sent: Friday, 8 December 2017 8:34 AM To: Legacy Ornamental Mills Subject: new video on on the legacy you can see

new video on on the legacy

you can see my newest video on youtube at:https://www.youtube.com/watch?v=6g6wzIW1HvM it's about how to index and lock down the 4 jaw chuck to the head stock, just like the locking index hub. you can then use custom face plates for everything. all comments are welcome, Russ -- You received

New Video

I have another new video on Youtube at: https://www.youtube.com/watch?v=HXsDdNav0F8 if you liked my "ceiling" video, you should really like this one about better (and cheaper) lighting in the workshop. all comments are welcomed. Russ -- You received this message because you are

Re: New Video

. I am having a bad shop day (kinda like bad hair day ) 3. I've been feeling tired lately (for years) 4. the wife is on strike. Again, thanks for your observations and comments. Russ On Monday, December 4, 2017 at 6:14:57 PM UTC-6, russ veinot wrote: > > I just made

Re: New Video

UTC, russ veinot wrote: > > I just made a new video on Youtube at: > https://www.youtube.com/watch?v=5vSr4xCsNbo > > It's not about the legacy directly but if you like those you might like > this one. It's about how to utilize the most used space in your shop, the > ceil

New Video

I just made a new video on Youtube at: https://www.youtube.com/watch?v=5vSr4xCsNbo It's not about the legacy directly but if you like those you might like this one. It's about how to utilize the most used space in your shop, the ceiling. all comments are welcome. Russ -- You received

Re: NEW VIDEO on YOUTUBE

Curt, clearance is about 24". I am thinking LED and maybe a couple of snake lights. thanks for the ideas. Mac, the dust hood is going to be a big add-on. I'm thinking a short curtain on rails to help direct dust up the fan opening. i got to thinking this featured full shelf would work well

Re: NEW VIDEO on YOUTUBE

again.Mac-Original Message- From: russ veinot <ru...@yknotwood.com> Sent: Nov 29, 2017 5:03 PM To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Subject: NEW VIDEO on YOUTUBE Part 4 of the legacy workstation is out..  stopped to show the features of the dedica

Re: NEW VIDEO on YOUTUBE

Nice job Russwhat kind of over-head clearance do you have, between your work station and the top of the Legacy?If I were your I would think of adding LED lights and skip the reflective foil. Keep up the good work.And Thank you for posting AND  sharing your ideas ...  ;-) C.A.G. On

NEW VIDEO on YOUTUBE

> > Part 4 of the legacy workstation is out.. stopped to show the features of > the dedicated shop vac & blower system AND the Dust Hood Fan is working. > it's working like a total workstation already. > > watch it at: https://www.youtube.com/watch?v=AnRvDnwPbaI > > > thanks for the

New Video on Youtube

part 3 of the legacy workstation is out.. stopped to show the features of the dedicated shop vac & blower system. it's starting to feel like a workstation already. watch it at: https://www.youtube.com/watch?v=mdU5yqVrVCI thanks for the interest, all comments welcomed. russ -- You

Re: New video on youtube

to:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube  Thank you Russ.I did miss those two videos. I like the dust separator/ baffles  you made.But , I was asking more on the Legacy,the

RE: New video on youtube

t me know if this doesn’t answer your question Russ From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube Thank you Russ. I

Re: New video on youtube

ct: Re: New video on youtube  Nice job on the Video Russ.Two questions on this topic. Noise. and containment. (chips)Im not asking you to spoil your up and coming videos by spilling the beans, but those are the two big problems that I have with shop vac.'s...  C.A.G.  On Friday, November 10, 2017 4

RE: New video on youtube

ber 10, 2017 6:12 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube Nice job on the Video Russ. Two questions on this topic. Noise. and containment. (chips) Im not asking you to spoil your up and coming videos by spilling the beans, but those are the two

Re: New video on youtube

;ru...@yknotwood.com> wrote:  !!!***  NEW VIDEO   ***!!!    My new video is now out at https://www.youtube.com/watch?v=Ii6Mj_RQaXw  It’s about time I turned my LOM from just a mill to a full blown workstation.  This is part 1 about design and breakdown of all the components to the works

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=Ii6Mj_RQaXw It’s about time I turned my LOM from just a mill to a full blown workstation. This is part 1 about design and breakdown of all the components to the workstation. More videos to come

Re: New video on youtube

Nice job -Original Message- From: Russ Veinot <ru...@yknotwood.com> To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com> Sent: Tue, Nov 7, 2017 3:21 pm Subject: New video on youtube !!!*** NEW VIDEO ***!!! My new video is now out at https://www

RE: New video on youtube

Thanks Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, November 07, 2017 3:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Real nice russ explains it all, I

Re: New video on youtube

Great video with several tips. Thx On Tue, Nov 7, 2017 at 2:21 PM, Russ Veinot <ru...@yknotwood.com> wrote: > !!!*** NEW VIDEO ***!!! > > > > > > My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY > > > > It’s about DIY faceplate

RE: New video on youtube

-ornamental-mills@googlegroups.com Subject: New video on youtube !!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I show how easy to make and what to watch out for. There is special attention

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I show how easy to make and what to watch out for. There is special attention to custom faceplates and tips for the LOM. Russ -- You

New video on youtube

!!!*** NEW VIDEO ***!!! Part 5 of the “New Milling Table is on my youtube channel at https://www.youtube.com/watch?v=R9fIvlR1IDk Legacy Building, part 5 of my milling table for my Legacy Mill. See how to make the off-set dog hole pattern on the milling table top and how

New video on youtube

!!!*** ANOTHER NEW VIDEO ***!!! There is a new video on my youtube channel at https://www.youtube.com/watch?v=UI7yEniGTws it’s a follow-up of my how to build the milling table I showed last video. There were some questions that came up. This is the follow-up to those questions

RE: New video on youtube

@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, October 22, 2017 8:06 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Nice video Russ and thank you for the plug for our group I hope it encourages others to post. Can you tell me about drilling

RE: New video on youtube

-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Monday, 23 October 2017 9:37 AM To: legacy-ornamental-mills@googlegroups.com Subject: New video on youtube !!!*** NEW VIDEO ***!!! There is a new video on my youtube channel at https://youtu.be/LWpnuAjKJoU it’s about how to build

New video on youtube

!!!*** NEW VIDEO ***!!! There is a new video on my youtube channel at https://youtu.be/LWpnuAjKJoU it’s about how to build the milling table I showed yesterday. Thanks to all for the encouragement to do this. -- You received this message because you are subscribed to the Google Groups

RE: New video on youtube

Thanks Bill, I’ll see what I do. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, October 21, 2017 3:59 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Very very

RE: New video on youtube

-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Sunday, 22 October 2017 5:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Hello everyone, I just made a new LOM video, can be seen at https

RE: New video on youtube

Hello everyone, I just made a new LOM video, can be seen at https://www.youtube.com/watch?v=fv2fESChgBQ if interested. It’s all about my new milling table that can hold any sized piece in any position for milling and batch milling. set up is done in less than 2 minutes and changing part out

New video on youtube

I just made another video on youtube, https://www.youtube.com/watch?v=cJ-LjFNZbVI It’s about my $200 workbench made from a $500 antique desk. It’s not a LOM video, but might be of interest to any workshop enthusiast. All comments are welcomed. -- You received this message because you

RE: new video on youtube, dust collection

-ornamental-mills@googlegroups.com Subject: RE: new video on youtube, dust collection Nice but how do you see what’s going on when milling Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 1

RE: new video on youtube, dust collection

Nice but how do you see what’s going on when milling Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 1 August 2017 10:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: new video

Re: new video on youtube, dust collection

Nice ! -Original Message- From: Russ Veinot <ru...@yknotwood.com> To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com> Sent: Mon, Jul 31, 2017 8:20 pm Subject: RE: new video on youtube, dust collection Sorry, I gave the wrong link to the

RE: new video on youtube, dust collection

Veinot Sent: Monday, July 31, 2017 5:58 PM To: legacy-ornamental-mills@googlegroups.com Subject: new video on youtube, dust collection I just publish another video about dust collection improvements on my 1200 if interested https://www.youtube.com/watch?v=ogy_c94Yt3o <https://www.youtube.co

new video on youtube, dust collection

I just publish another video about dust collection improvements on my 1200 if interested https://www.youtube.com/watch?v=ogy_c94Yt3o =192s Comments are always welcome :>) -- You received this message because you are subscribed to the

Re: new video from legacy

-Ornamental-Mills@googlegroups.com Sent: Wednesday, October 01, 2008 7:33 PM Subject: new video from legacy it's kind of slick, not sure of the price but it looks like a big piece of equipment. --~--~-~--~~~---~--~~ You received this message because you