Jacky,
Take a look at the following wiki article:
http://wiki.ltsp.org/twiki/bin/view/Ltsp/NFS#NFS_Server_not_responding
That should explain what the problem is, and how to fix it.
Jim McQuillan
[EMAIL PROTECTED]
Jacky Li wrote:
Hi,
In a 100 Mbit network environment, I have no problem
Hi,
In a 100 Mbit network environment, I have no problem with LTSP 4.1. My
network card is 3com 905B-TX. After I move it to another
building with 10 Mbit environment, it passed the pivot_root point and
just hangs with a nfs message not responding..still trying. Thank you
in advance for your
hello,
I am getting the NFS mount problem with HP-vetra p200 machines,
the process gets very slow while mounting NFs file it just stops at
doing pivot root.
I passed the parameters metinoned by Jim in ealier mails , but the issue
remains same.
How to check whether the PCI solt is proper or not ?
I
seekuel _lycos.com wrote:
Greetings!!!
sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are all
identical, evrything wroks fine exept for 1 workstation which was the bios was
updated to newer version. This are the last few lines the workstation displays:
Running dhcpd on po
Am Dienstag, den 14.06.2005, 13:53 +0800 schrieb seekuel _lycos.com:
> Greetings!!!
>
> sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are all
> identical, evrything wroks fine exept for 1 workstation which was the bios
> was updated to newer version. This are the last few l
On 6/14/05, Harry Sufehmi <[EMAIL PROTECTED]> wrote:
> At 13:53 14/06/2005 +0800, seekuel _lycos.com wrote:
> >sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are
> >all identical, evrything wroks fine exept for 1 workstation which was the
> >bios was updated to newer version. T
At 13:53 14/06/2005 +0800, seekuel _lycos.com wrote:
sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are
all identical, evrything wroks fine exept for 1 workstation which was the
bios was updated to newer version. This are the last few lines the
workstation displays:
Runni
Greetings!!!
sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are all
identical, evrything wroks fine exept for 1 workstation which was the bios was
updated to newer version. This are the last few lines the workstation displays:
Running dhcpd on port 67
Mounting root filesys
Dirk-Lüder wrote:
>the client boots off BIOS PXE, starts normal until the following output:
>
>Running dhclient
>e100: eth0 NIC Link is Up 100 Mbps Full duplex
>Mounting root filesystem: /opt/ltsp/i386 from: 192.168.1.71
>
>Then it just sits there, generating lots of traffic and the LTSP-Server sy
Currently I have the following setup:
Ltsp Server (192.168.1.71, hostname Artena) SuSE 7.3, Kernel 2.4.20
1 Client (192.168.1.73, hostname Intoccabile)
the client boots off BIOS PXE, starts normal until the following output:
Running dhclient
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Mou
PROTECTED]
Linux Registred User # 280238
Visite: http://www.lc3.com.br/
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Marcio Pessoa" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, October 17, 2003 4:43 PM
Subject: Re: [Ltsp-discuss] NFS problem
On Fri, 2003-10-17 at 14:00, Marcio Pessoa wrote:
> Hi all,
>
> I have a small network with a LTSP server and 6 terminals.
>
> The LTSP can't mount /home directory on terminals, syslog reports
> the follow message:
>
> rpc.mountd: authenticated mount request from 192.168.1.2:784 for /
Hi all,
I have a small network with a LTSP server and 6 terminals.
The LTSP can't mount /home directory on terminals, syslog reports
the follow message:
rpc.mountd: authenticated mount request from 192.168.1.2:784 for /home
(/home)
rpc.mountd: getfh failed: Operation not permitted
Tha
On Fri, 17 Oct 2003, Marcio Pessoa wrote:
> Hi all,
>
> I have a small network with a LTSP server and 6 terminals.
>
> The LTSP can't mount /home directory on terminals, syslog reports
> the follow message:
>
> rpc.mountd: authenticated mount request from 192.168.1.2:784 for /home
>
Hi all,
I have a small network with a LTSP server and 6 terminals.
The LTSP can't mount /home directory on terminals, syslog reports
the follow message:
rpc.mountd: authenticated mount request from 192.168.1.2:784 for /home
(/home)
rpc.mountd: getfh failed: Operation not permitted
Thank
hi to all
here is an old problem i never succeed to solve!
everything is OK with my LTSP install, except the NFS mounting of /home directory
from the LTSP/NFS server (it is the same)
i have this problem below at boot time when mounting the /home directory
from NFS server
"NFS warning: mount ver
On Thu, Jul 17, 2003 at 10:46:29AM -0400, [EMAIL PROTECTED] wrote:
>
> Maurice,
>
> Do this on your server:
>
>showmount -e
>
>
> Make sure it lists your /home directory as exported,
> and check the address that it is exporting it to.
yes they are... (/home clients are comlx*.com.univ-mrs
Maurice,
Do this on your server:
showmount -e
Make sure it lists your /home directory as exported,
and check the address that it is exporting it to.
Jim McQuillan
[EMAIL PROTECTED]
On Thu, 17 Jul 2003, Maurice Libes wrote:
> hi to all i'am new to the list...
>
> i use ltsp since s
hi to all i'am new to the list...
i use ltsp since some weeks with great pleasure and i
didn't have big problems (thanks to the team)
except this one:
i never succeeded to mount the users home directory from
a NFS server, on the client PC (with LOCAL_APPS = y)
i dont know why since the fi
Hello
Im installing ltsp 3.0.4 in my Indonesian OS ( WINBI )
using kernel 2.2.19 that OS is based Trustix ( Redhat
Based ) ... After change some script and installed, i
got a problem at
Doing the pivot_root line --> client side
nfs :server 192.168.90.58 not responding, still trying
nfs :serv
Wouter,
I Fixed that error already, the error is in the /etc/exports like you said
thanks
Mike
> Michael,
>
> It just happens that I had a comparable problem this morning. Did you
> check the /etc/exports file? The lines for LTSP should also point to
> 192.168.1.22
>
> Wouter
>
>
> On 15-
Michael,
It just happens that I had a comparable problem this morning. Did you
check the /etc/exports file? The lines for LTSP should also point to
192.168.1.22
Wouter
On 15-Oct-02 Michael Hadianto wrote:
> sorry for the misstype
> the full error message :
>
> (null)mount : nfsmount failed :
sorry for the misstype
the full error message :
(null)mount : nfsmount failed : Bad file number
NFS: mount program didn't pass remote address!
mount : Mounting 192.168.1.22:/opt/ltsp/i386 on /mnt failed : invalid
argument
ERROR! Failed to mount the root directory via NFS!
-
-
-
-
Kernel Panic
Michael,
can you double check that error message ?
you showed:
mount 192.168.1.22/opt/ltsp/i386
there should be a ':' between the IP address and the
directory. If you don't have it in your /etc/dhcpd.conf
file, then that could cause a problem.
or, maybe you just typed it wrong when you sen
Hi All,
I'm new in here so i dont know the topic is already been asked or not ? so
i asked again.
I'm installing the LTSP 3.0.7 on redhat 8, after initialize the install
script and setting the dhcpd and also the tftp. Then i run the
workstation. For the workstation i'm using etherboot.
The works
Hi Luciano,
have a look on autofs, the linux automounter. For example I have mounted my
/home with the following line in auto.master
/home /etc/auto.home --timeout 60
and in /etc/auto.home
* -fstype=nfs,soft,intr,rsize=8192,wsize=8192,nosuid intraserv:/home/&
which does nothing else then mount
Hello Again:-)
I'm trying to put in work old pentium as clients. I have 100Mbits NICs
(realtek8139 or 3C905C-TX-M) at the client's side but this configuration
don't work. The client can't mount /opt/lts/i386, it says the server is
not responding and can't get a request slot, but there is no probl
On Mon, Apr 29, 2002 at 01:49:46PM +0200, Hans Ekbrand wrote:
> The computers are connected through a hub. The firewall at the server
> is told to accept every packet from the clients mac-adress.
For the archives: I tried a cross-over cable instead of a hub and,
viola, it worked perfectly.
> The
I have a LTSP server that works perfectly for my other LTSP clients,
but for one client NFS does not work.
The client says:
[...]
"Mounted devfs on /dev"
"Freeing unused kernel memory: 52k freed"
"nfs: server 192.168.0.254 not responding, still trying"
I can ping the client no problem:
[13:29:4
Il giorno Fri, 26 Apr 2002, Andres Betancourt E. così ha scritto:
|From: Andres Betancourt E. <[EMAIL PROTECTED]>
|To: David Johnston <[EMAIL PROTECTED]>
|Date: Fri, 26 Apr 2002 08:17:44 -0500
|Subject: RE: [Ltsp-discuss] NFS problem
|
| I run
|
|# netstat -l | grep nfs
|
|an
I run
# netstat -l | grep nfs
and had answer, but not this line
udp0 0 *:nfs *:*
I modify ipchains, but I have the same problem with NFS.
Andres Beta
_
Ltsp-discuss mailing list. To
"Andres Betancourt E." wrote:
>
> David,
>
> I am run 'netstat > -l | grep nfs and,
> udp0 0 *:nfs *:*
>
> this line does not appear
> I that I can make to add it?
>
> I modify ipchains, but I have the same problem with NFS.
>
> Andre Beta
I think I may have m
David,
I am run 'netstat > -l | grep nfs and,
udp0 0 *:nfs *:*
this line does not appear
I that I can make to add it?
I modify ipchains, but I have the same problem with NFS.
Andre Beta
_
"Andres Betancourt E." wrote:
>
> Sandro.
> The NFS is Runing. The probe is this :
> [root@linux /home]# rpcinfo -p
>program vers proto port
> 132 udp 2049 nfs
> 132 tcp 2049 nfs
>
> [root@linux /home]# grep portmap /etc/hosts.allow
> portmap: 192.168.1.
"Andres Betancourt E." wrote:
> The answer to ipchains-save is:
> :input ACCEPT
> :forward DENY
> :output ACCEPT
> Saving `forward'.
> -A forward -s 192.168.1.0/255.255.255.0 -d 0.0.0.0/0.0.0.0 -j MASQ
> -A forward -s 192.168.1.0/255.255.255.0 -d 0.0.0.0/0.0.0.0 -j MASQ
>
> this is correct?
Yes,
Il giorno Wed, 24 Apr 2002, Andres Betancourt E. così ha scritto:
|From: Andres Betancourt E. <[EMAIL PROTECTED]>
|To: David Johnston <[EMAIL PROTECTED]>
|Date: Wed, 24 Apr 2002 09:05:57 -0500
|Subject: RE: [Ltsp-discuss] NFS problem
|
|David,
|The answer to ipchains-save
Sandro.
The NFS is Runing. The probe is this :
[root@linux /home]# rpcinfo -p
program vers proto port
102 tcp111 portmapper
102 udp111 portmapper
3000191 tcp805 amd
3000191 udp806 amd
115 udp913 rstatd
Il giorno Wed, 24 Apr 2002, Andres Betancourt E. così ha scritto:
|From: Andres Betancourt E. <[EMAIL PROTECTED]>
|To: David Johnston <[EMAIL PROTECTED]>
|Date: Wed, 24 Apr 2002 08:26:03 -0500
|Subject: RE: [Ltsp-discuss] NFS problem
|
|David, thanks for your answer.
|
|I made t
ginal Message -
From: David Johnston <[EMAIL PROTECTED]>
To: Andres Betancourt E. <[EMAIL PROTECTED]>
Sent: Wednesday, April 24, 2002 8:43 AM
Subject: Re: [Ltsp-discuss] NFS problem
> "Andres Betancourt E." wrote:
> > I made the test with ipchains-save, and t
o now?
Andres Betancourt
- Original Message -
From: David Johnston <[EMAIL PROTECTED]>
To: Andres Betancourt E. <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, April 23, 2002 9:24 PM
Subject: Re: [Ltsp-discuss] NFS problem
> "Andres Betancourt E.&q
"Andres Betancourt E." wrote:
>
> I have problems with the NFS,
> The message that shows is:
> Mountin root filesystem: /opt/ltsp/i386 from: 192.168.1.4
> Doing the pivot_root
> nfs: server 192.168.1.4 not responding, still trrying
>
> 192.168.1.4 is my server.
> My Linux is: OpenCaldera 2.4 e
I have problems with the NFS,
The message that shows is:
Mountin root filesystem: /opt/ltsp/i386 from: 192.168.1.4
Doing the pivot_root
nfs: server 192.168.1.4 not responding, still trrying
192.168.1.4 is my server.
My Linux is: OpenCaldera 2.4 eDesktop
that it can be happening, if the service
Hi
I have gotten the workstation to boot to the point where it tries to mount
the root partition. From there, I get a kernel panic. It says that there
was a bad file number and that mount passed an incorrect parameter.
I am away from the exact text of the error at the moment. Any ideas?
Tim
Actually I would like to compile my very own kernel...Was trying to get
2.2.18 and 2.4.9 to work but to no avail. But 2.2.14 works great. Still not
sure what is the problem or some config that I missed. From the config kernel
that was provided by LTSP, it seems that the option for IP autocon
Which distro of LTSP are you using? If your using 2.0.8 and want to move up
to a 2.4.x kernel I'd suggest moving to 2.0.9 it's stable and runs well on
Mandrake 8.1 (from my experience).
> Hi everyone
>
> Have this little problem with my set-up.
>
> I have Mandrake 8.1 running as server. The
Hi everyone
Have this little problem with my set-up.
I have Mandrake 8.1 running as server. The client been running ok with
kernel 2.2.14. When I decided to upgrade my client kernel to 2.2.18 as
well as 2.4.9..The client got stuck at:
Mounting NFS Filesystem..
It stuck there forever!!
Bu
Hello All
I just installed 2.09pre4 and am faced with the
following error when the workstation boots:
"NFS server not responding.."
NFS is running. /var/log/messages do not report
anything strange..
I am running Mandrake 7.2 on server and RealTek 8029
NIC on workstation.
Thanks
My setup is as follows:
Server is running Mandrake 7.2
Ltsp 2.08 installs fine. The directory /tftpboot is
created.
The files are exported through NFS as
/tftpboot/lts/ltsroot
On the diskless workstation side:
I am booting from a floppy using boot floppy
created from eb-5.0.3.rtl8029.lzds
48 matches
Mail list logo
