On 04/10/2017 01:22, Richard Heck wrote:
I just got the following question:
Why not reverse the process; Rather than modifying a dozen styles?
What would it take to create something like a "Subsection-v2" which
would just use as counter the "thm" counter?
This can be done, but it would mean cre
On 10/03/2017 06:41 PM, rls wrote:
> Thanks once more!
>
> I truly understand the need to RTFM, but sometimes one is tired, just
> looking for a quick fix (having gone through Pascal, 8086 assembly, C,
> LateX Java, ML, and programmed a half dozen editors...)
I understand, of course, and did not m
Thanks once more!
I truly understand the need to RTFM, but sometimes one is tired, just
looking for a quick fix (having gone through Pascal, 8086 assembly, C,
LateX Java, ML, and programmed a half dozen editors...)
I realize one has to modify every "construct" (Definition, Corollary etc.)
I
seems to me as if you will probably be best off creating a new module
>> of your own, perhaps starting with and modifying theorems-ams.module.
>> Documentation concerning this is in Ch 5 of the Customization manual. As
>> far as the counters are concerned, you will want to mo
as if you will probably be best off creating a new module
of your own, perhaps starting with and modifying theorems-ams.module.
Documentation concerning this is in Ch 5 of the Customization manual. As
far as the counters are concerned, you will want to modify the
LabelCounter defined for the var
haps starting with and modifying theorems-ams.module.
Documentation concerning this is in Ch 5 of the Customization manual. As
far as the counters are concerned, you will want to modify the
LabelCounter defined for the various styles so that it uses the one for
subsections.
Note that you can just make m
I am Lyx beginner. Sorry if it's in the docs. Thanks in advance for your
help.
I need to have Theorems (and Lemmas, etc.) to share the same counter
with subsectons.
I can't find a way to do it with Lyx.
=== Example of Section 2, in a document
2. Reals simply defi
On Wed, 27 May 2015, Rich Shepard wrote:
I'm looking for suggestions on placing figure floats in a document where
each figure is associated with a short subsection or sub-subsection.
The solution consists of restructuring the document, raising subsections
to sections and cascading t
On Wed, 27 May 2015, Enrico Forestieri wrote:
Note that latex allows only a fixed number of floats per page. By default,
this is 3 but this number is stored in a counter and it can be changed.
Enrico,
Each float occupies about a half-page. There would be room for the figure
and accompanying
Rich Shepard writes:
>
> On Wed, 27 May 2015, Nikos Alexandris wrote:
>
> > Do the
> >
> > Document > Settings > Float Placement > "Here if possible" or "Here
> > definitely"
> >
> > options help?
>
> Nikos,
>
>Not so far. I'm still playing with them, but I get the maximum number
> of fig
On Wed, 27 May 2015, Nikos Alexandris wrote:
Do the
Document > Settings > Float Placement > "Here if possible" or "Here
definitely"
options help?
Nikos,
Not so far. I'm still playing with them, but I get the maximum number of
figures allowed in a section, then no graphic is displayed. T
* Rich Shepard [2015-05-27 13:33:43 -0700]:
>I'm looking for suggestions on placing figure floats in a document where
> each figure is associated with a short subsection or sub-subsection. There
> are approximately 33 figures in the document (so far) and I would like to
> place each figure so
I'm looking for suggestions on placing figure floats in a document where
each figure is associated with a short subsection or sub-subsection. There
are approximately 33 figures in the document (so far) and I would like to
place each figure somewhere close to the associated text. This document is
On 2011-11-18, Richard Heck wrote:
> On 11/17/2011 08:28 PM, Kenedy Torcatt wrote:
>> I noticed that when I insert a subsection (numbered) in lyx, this is
>> added to toc, but if I select subsection* this is not appearing into
>> the table of content? how to chanege this by default? any preamble
>
On Fri, Nov 18, 2011 at 2:28 AM, Kenedy Torcatt wrote:
> I noticed that when I insert a subsection (numbered) in lyx, this is
> added to toc, but if I select subsection* this is not appearing into
> the table of content?
>
http://wiki.lyx.org/FAQ/TOC#addcontentsline
Liviu
> how to chanege this
On 11/17/2011 08:28 PM, Kenedy Torcatt wrote:
> I noticed that when I insert a subsection (numbered) in lyx, this is
> added to toc, but if I select subsection* this is not appearing into
> the table of content? how to chanege this by default? any preamble
> code to do this?
>
This is not terribly
I noticed that when I insert a subsection (numbered) in lyx, this is
added to toc, but if I select subsection* this is not appearing into
the table of content? how to chanege this by default? any preamble
code to do this?
Thanks Rob,
Actually, this was on vanilla lyx-devel svn trunk.
Best,
-Jose
Jose Quesada, PhD.
Max Planck Institute,
Center for Adaptive Behavior and Cognition,
Berlin
http://www.josequesada.name/
http://twitter.com/Quesada
On Sun, Aug 8, 2010 at 5:40 PM, Rob Oakes wrote:
> Hi Jose,
>
> If yo
Hi Jose,
If you've been using the LyX-Outline branch, you may want to update to
the most recent version. It's been a little over a week since I've
merge LyX trunk. (I've been trying to fix a problem related to tabbing
to the next entry in the expanded outline view.)
I merged the source again th
Sorry to revive an old thread, but the slowness is still there, with current
svn versions. I'm writing this on kde. May not be happening on other wm (for
a while I was on xmonad, and didn't remember to type faster than lyx could
render)...
Best,
-Jose
Jose Quesada, PhD.
Max Planck Institute,
Cente
> Out of curiosity, do you notice the performance lags when using the
expanded outline/corkboard widget?
Nope, it doesn't happen! which is incredibly good news!
Best,
-Jose
Jose Quesada, PhD.
Max Planck Institute,
Center for Adaptive Behavior and Cognition,
Berlin
http://www.josequesada.name/
h
Hi Vincent,
<< So.. could it be Rob's outliner enhancements then ??? >>
That's certainly possible, but I think it unlikely. To the best of my
knowledge, Jose only began using the branch with the expanded outliner and
other tools yesterday whereas the problem has also been seen in LyX 1.6.6.1
On Fri, Jun 25, 2010 at 10:15 AM, Jose Quesada wrote:
> Some more evindence...
>> Excellent question. Where did you get your LyX version?
> 1- It's not only lyx from packages that exhibits this behavior, but also the
> svn version. Well, I'm actually using Rob's branch (lyx-outliner, from
> launc
Some more evindence...
> Excellent question. Where did you get your LyX version?
1- It's not only lyx from packages that exhibits this behavior, but also the
svn version. Well, I'm actually using Rob's branch (lyx-outliner, from
launchpad). Will keep testing.
2- All slowness goes away if I hide
I'm using both sabayon (laptop) and ubuntu (2 desktops).
Will try to compile it with debug symbols, but now I'm under deadline
pressure. Maybe 1st Jul or so, I'll report back...
Thanks!
Best,
-Jose
Jose Quesada, PhD.
Max Planck Institute,
Center for Adaptive Behavior and Cognition,
Berlin
http://w
Liviu Andronic writes:
> On Fri, Jun 18, 2010 at 12:30 PM, stephen's mailinglist account
> wrote:
>> Is this with ./configure --enable-build-type=pre
>>
> I am not sure how this works for LyX. From my experience whenever
> debug symbols are needed, either install *-dbg package or build from
> so
> > Hi again,
> >
> > I have to say, I still find slowness overall. On both
> sabayon and ubuntu.
> > Everybody I know describes LyX as lighting fast. And
> it has the most useful
> > outliner I know (and getting better). It'd be a pity
> we cannot have both
> > things at the same time.
Several m
On Fri, Jun 18, 2010 at 12:30 PM, stephen's mailinglist account
wrote:
> Is this with ./configure --enable-build-type=pre
>
I am not sure how this works for LyX. From my experience whenever
debug symbols are needed, either install *-dbg package or build from
source. The latter should suffice for m
On Fri, Jun 18, 2010 at 9:19 AM, Jose Quesada wrote:
> Hi Jean-Marc,
>>Do you have a version of lyx with debugging symbols? If you do you could
>>try to run sysprof on it and see where the time is spent.
> No, where do I get it?
>
It seems that you use Ubuntu. Since there seems to be no lyx-dbg on
Jose Quesada writes:
> Hi Jean-Marc,
>
>>Do you have a version of lyx with debugging symbols? If you do you could
>>try to run sysprof on it and see where the time is spent.
> No, where do I get it?
Excellent question. Where did you get your LyX version?
JMarc
Hi Jean-Marc,
>Do you have a version of lyx with debugging symbols? If you do you could
>try to run sysprof on it and see where the time is spent.
No, where do I get it?
Best,
-Jose
Jose Quesada, PhD.
Max Planck Institute,
Center for Adaptive Behavior and Cognition,
Berlin
http://www.josequesada
Jose Quesada writes:
> Hi again,
>
> I have to say, I still find slowness overall. On both sabayon and ubuntu.
> Everybody I know describes LyX as lighting fast. And it has the most useful
> outliner I know (and getting better). It'd be a pity we cannot have both
> things at the same time.
Do yo
On Tuesday 15 June 2010 14:01:01 Jose Quesada wrote:
> Thanks richard for looking at the code carefully.
>
> I also think it could be qt related. I've spent the afternoon switching
> from lxde, gnome, and kde envs and trying different wm. It seems that it's
> mostly happening on kde, but I'm not
Thanks richard for looking at the code carefully.
I also think it could be qt related. I've spent the afternoon switching from
lxde, gnome, and kde envs and trying different wm. It seems that it's mostly
happening on kde, but I'm not sure anymore.
Best,
-Jose
Jose Quesada, PhD.
Max Planck Instit
On 06/15/2010 06:35 AM, Jose Quesada wrote:
Hi again,
I have to say, I still find slowness overall. On both sabayon and
ubuntu. Everybody I know describes LyX as lighting fast. And it has
the most useful outliner I know (and getting better). It'd be a pity
we cannot have both things at the sa
Hi again,
I have to say, I still find slowness overall. On both sabayon and ubuntu.
Everybody I know describes LyX as lighting fast. And it has the most useful
outliner I know (and getting better). It'd be a pity we cannot have both
things at the same time.
Best,
-Jose
Jose Quesada, PhD.
Max Pla
Jose Quesada wrote, On 01/-10/-28163 02:59 PM:
> update: using branches does not help.
> Moving around in a large doc (example: userGuide) is sluggy too. Weird. This
> must be something in my config...
> I tried 1.6.4 (ubuntu) 1.6.6 (sabayon) and 2alpha 3 (ubuntu). Same problem.
> The problem is th
Thanks all,
Looks like the problem may have to do with my nvidia drivers.
Compositing is Xrender, openGL doesn't work. No idea why (nvidia drivers
185, geforce 8400 gs)
Following up on a tip on the google search suggested in this thread,
I added Option "FramebufferCompression" "false" to device
On 13/06/2010 00:27, Jose Quesada wrote:
Thanks Paul,
It makes me sad when I face situations like this. LyX is a great tool,
that should work well under linux (open source, qt, etc).
Actually, LyX have been must faster on Windows than on Linux for a few
years now. This is probably because mos
On Sat, Jun 12, 2010 at 10:22 PM, [Ricardo Rodriguez] eBioTIC.
wrote:
> I am not able to reproduce this behaviour in a 2.0.0alpha3 (MacTeX-2009)
> installation running on a MacBook Pro with Mac OS X 10.5.8. Reaction to
> typing is quite normal here.
>
> What I've not installed here is Springer LNC
Thanks Paul,
It makes me sad when I face situations like this. LyX is a great tool, that
should work well under linux (open source, qt, etc). But what I find is the
contrary. Obscure bug that I have no time to track (I know first hand this
could be a time sink, going down the rabbit hole...). Ubun
Jose Quesada gmail.com> writes:
>
>
> ok, attached is an example.
>
> At 40 headins it is kind of too slow for actuall work.
Your example file does not cause my laptop (Mint Helena, which is built on
Ubuntu Karmic; dual core Intel processor) any problems. Response to the cursor
keys is fine.
Hi,
Jose Quesada wrote:
ok, attached is an example.
At 40 headins it is kind of too slow for actuall work.
Turning autocompletion off doesn't help. Neither does turning off
inline spelling.
htop shows lyx using little memory and cpu. Performance degrades
lineally with number of headings.
If
t; Max Planck Institute,
>> Center for Adaptive Behavior and Cognition,
>> Berlin
>> http://www.josequesada.name/
>> http://twitter.com/Quesada
>>
>>
>> On Sat, Jun 12, 2010 at 8:16 PM, Steve Litt wrote:
>>
>>> On Saturday 12 June 2010 11:
; On Saturday 12 June 2010 11:55:20 Jose Quesada wrote:
>> > Hi,
>> >
>> > I'm not sure if this is only on my particular doc, but it seems to me
>> > that lyx chokes on documents with many subsections?
>> > It's a notes doc. It may have close to a hun
not sure if this is only on my particular doc, but it seems to me
> > that lyx chokes on documents with many subsections?
> > It's a notes doc. It may have close to a hundred headinds (section,
> > subsection etc).
> > Typing becomes slow. Even moving around with th
On 12/06/2010 11:55 AM, Jose Quesada wrote:
Hi,
I'm not sure if this is only on my particular doc, but it seems to me
that lyx chokes on documents with many subsections?
It's a notes doc. It may have close to a hundred headinds (section,
subsection etc).
Typing becomes slow. Even mov
On Saturday 12 June 2010 11:55:20 Jose Quesada wrote:
> Hi,
>
> I'm not sure if this is only on my particular doc, but it seems to me
> that lyx chokes on documents with many subsections?
> It's a notes doc. It may have close to a hundred headinds (section,
> subse
On 6/12/2010 1:13 PM, Jose Quesada wrote:
nope, no tables, just a long, complicated outline.
Maybe I could flatten it a little...
If you're in the mood to experiment, you might try putting different
sections in different branches (which you can color-code). Then
collapse the branches you're
wrote:
> Hello
>
> On Sat, Jun 12, 2010 at 4:55 PM, Jose Quesada wrote:
> > Hi,
> > I'm not sure if this is only on my particular doc, but it seems to me
> > that lyx chokes on documents with many subsections?
> > It's a notes doc. It may have close to
Hello
On Sat, Jun 12, 2010 at 4:55 PM, Jose Quesada wrote:
> Hi,
> I'm not sure if this is only on my particular doc, but it seems to me
> that lyx chokes on documents with many subsections?
> It's a notes doc. It may have close to a hundred headinds (section,
> subsecti
Hi,
I'm not sure if this is only on my particular doc, but it seems to me
that lyx chokes on documents with many subsections?
It's a notes doc. It may have close to a hundred headinds (section,
subsection etc).
Typing becomes slow. Even moving around with the arrow keys shows a
notice
On 4/2/10, Frederick Noronha wrote:
> Just a query: is it possible for me to get sections* and subsections*
> to show up in the table of contents of a Memoir style book?
>
Yes. See this.
http://wiki.lyx.org/FAQ/Unsorted#toc22
Liviu
> I can manage with sections/subsections, but do
Just a query: is it possible for me to get sections* and subsections*
to show up in the table of contents of a Memoir style book?
I can manage with sections/subsections, but don't want any numbers to
show up before these. Thanks! FN
--
Frederick Noronha
Books from Goa :: http://goa155
suppose that the main LyX doc is organized by a couple of inputs. What is the
best and most efficient way to reorder the subsections which are the different
sub-docs? Thus I do not mean shuffling within the sub-docs, but shuffling like
1.. sub-sec 2 - doc 1
2.. sub-sec 1 - doc 2
3.. sub
Hi,
suppose that the main LyX doc is organized by a couple of inputs. What is the
best and most efficient way to reorder the subsections which are the different
sub-docs? Thus I do not mean shuffling within the sub-docs, but shuffling like
1.. sub-sec 2 - doc 1
2.. sub-sec 1 - doc 2
3
titlesec
- Original Message -
From: "Marcelo Reis"
To:
Sent: Sunday, July 05, 2009 12:46 AM
Subject: Styles Change on Section , Subsections, SubSubSections sectsty
Guys, another question,
If I'd like to change the format of the Sections, SubSections and
SubSubSecti
Guys, another question,
If I'd like to change the format of the Sections, SubSections and
SubSubSections, What would be the best way?
I'd like to change Sections Size, Bold, Italic...
I found out about the package sectsty, Would it be the best way?
Regards
Marcelo
On Mon, Dec 8, 2008 at 2:40 AM, Paul A. Rubin <[EMAIL PROTECTED]> wrote:
>> How can one force subsections to be written, in the TOC of a Beamer
>> presentation, in the same way sections are written colorwise?
>
> In the preamble, _after_ the \usetheme co
Paul Smith wrote:
Dear All,
How can one force subsections to be written, in the TOC of a Beamer
presentation, in the same way sections are written colorwise?
Thanks in advance,
Paul
In the preamble, _after_ the \usetheme command (if any), try this:
\setbeamercolor{subsection in toc
On Sat, Dec 6, 2008 at 9:38 PM, rgheck <[EMAIL PROTECTED]> wrote:
>> How can one force subsections to be written, in the TOC of a Beamer
>> presentation, in the same way sections are written colorwise?
>
> Look under Document>Settings>Numbering and TOC.
Thanks,
Paul Smith wrote:
Dear All,
How can one force subsections to be written, in the TOC of a Beamer
presentation, in the same way sections are written colorwise?
Look under Document>Settings>Numbering and TOC.
rh
Dear All,
How can one force subsections to be written, in the TOC of a Beamer
presentation, in the same way sections are written colorwise?
Thanks in advance,
Paul
Thanks for the suggestion, it works. Package titlesec is a good
solution for customizing titles.
Pierfranco.
2008/10/13 rgheck <[EMAIL PROTECTED]>:
> Pierfranco Minsenti wrote:
>>
>> Hi all,
>>
>> I use Lyx and the class Article. I find that the titles of numbered
Pierfranco Minsenti wrote:
Hi all,
I use Lyx and the class Article. I find that the titles of numbered
subsections are too big and I would like to change them. However if i
select these titles and change their character dimensions, the numbers
remain as big as before and only the words of the
Hi all,
I use Lyx and the class Article. I find that the titles of numbered
subsections are too big and I would like to change them. However if i
select these titles and change their character dimensions, the numbers
remain as big as before and only the words of the title change.
Is there a
w I can select and change the color manually, but how to do it
> from the peamble? I mean, to make all sections red, subsections blue,
> etc ... in the output. I looked at some LaTeX examples but all of them
> are for theorems or boxes not for the secctions.
>
> Thanks,
>
> Tomas
I know I can select and change the color manually, but how to do it
from the peamble? I mean, to make all sections red, subsections blue,
etc ... in the output. I looked at some LaTeX examples but all of them
are for theorems or boxes not for the secctions.
Thanks,
Tomas
Joerg Hau wrote:
Hi All,
How can I preserve the ongoing numbering of the "Enumerate" environment
across subsections?
I am writing a tutorial, which is a "step-by-step" guide through some
functions of some software. Since the sequence of actions is of some
import
serve the ongoing numbering of the "Enumerate"
environment
across subsections?
See attached LyX-example file.
Thanks Uwe, but your file uses \setcounter{enumi}{4}, i.e. a pre-
defined counter. This is exactly what I want to avoid:
My question is, how do you achieve this in LyX?
Joerg Hau wrote:
How can I preserve the ongoing numbering of the "Enumerate" environment
across subsections?
See attached LyX-example file.
Thanks Uwe, but your file uses \setcounter{enumi}{4}, i.e. a pre-defined
counter. This is exactly what I want to avoid:
My question
Hi,
>
>> How can I preserve the ongoing numbering of the "Enumerate" environment
>> across subsections?
> See attached LyX-example file.
Thanks Uwe, but your file uses \setcounter{enumi}{4}, i.e. a pre-defined
counter. This is exactly what I want to avoid:
> My
Joerg Hau schrieb:
How can I preserve the ongoing numbering of the "Enumerate" environment
across subsections?
See attached LyX-example file.
regards Uwe
newfile1.lyx
Description: application/lyx
Hi All,
How can I preserve the ongoing numbering of the "Enumerate" environment
across subsections?
I am writing a tutorial, which is a "step-by-step" guide through some
functions of some software. Since the sequence of actions is of some
importance, the "Enumerat
>>>>> "André" == Bonhôte, André <[EMAIL PROTECTED]> writes:
André> Hi! I don't really think this is something about LyX, rather a
André> LaTeX issue IMHO. I have a document containing some sections
André> and a huge number of subsections in each,
Hi!
I don't really think this is something about LyX, rather a LaTeX
issue IMHO. I have a document containing some sections and a huge
number of subsections in each, all empty (it's going to be a database
documentation - filling in will need some time). Now, exporting to
P
> "Rodrigo" == Rodrigo Esteves de Lima-Lopes <[EMAIL PROTECTED]> writes:
Rodrigo> Thank you Voss But after doing this, I havent found any
Rodrigo> change on my style list, how can I manage to make it?
The levels after subsubsection are paragraph and subparagraph.
JMarc
about subsections
> Rodrigo Esteves de Lima-Lopes wrote:
>>
>> Hi friends
>>
>> I,m writing a document which needs more than usual number of subsections.
>>
>> In Lyx main window it allows you to have three levels, eg
>>
>> 1.1.1 section
>&g
Rodrigo Esteves de Lima-Lopes wrote:
>
> Hi friends
>
> I,m writing a document which needs more than usual number of subsections.
>
> In Lyx main window it allows you to have three levels, eg
>
> 1.1.1 section
>
> Acutally I need to have in my document f
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
1.1.1.1.section
1.1.1.1.1 section
Is there any command which
> "Esteve" == Esteve Del Acebo <[EMAIL PROTECTED]> writes:
Esteve> Hello all I've just installed the 1.1.2 version for Solaris
Esteve> and I have the problem that subsection items don't appear in
Esteve> the lyx edit window (but they do appear in the .dvi file). I
Esteve> don't think that tha
Hello all
I've just installed the 1.1.2 version for Solaris and I have the
problem that subsection items don't appear in the lyx edit window (but
they do appear in the .dvi file). I don't think that that could be a
bug, but I can't find the way to solve the problem. Could somebody help
me please?
is of type Standard. What can I do to make the printed
Mario> version look like the one above?
In fact, this is a normal behaviour: having subsections presented like
that is a design decision of the AMS LaTeX authors. This is how things
appear in the AMS publications.
The bug is in LyX WYSIW
Hello,
When I use amsart document layout I get the following undesired
behaviour.
A subsection that should look like this:
2.1 This is a subsection
This is a paragraph under a subsection
looks like this
2.1 This is a subsection. This is a paragraph under a subsection
The lyx
84 matches
Mail list logo
