RE: Help required for "snmpwalk: Authentication failure "

Any update on the behaviour ? Thank you Krishna Vivek From: Krishna Vivek Vitta Sent: 23 April 2019 11:43 To: net-snmp-users@lists.sourceforge.net Subject: Help required for "snmpwalk: Authentication failure " Hi expert, We have a case where snmpwalk fails after snmpv3 user is added to trap

Agent not responding to HP Mibs

Hi Team, I am using net-snmp on windows for snmp v3 implementation, I am using cygwin on windows and installed net-snmp packages to it. snmpd.conf located at /usr/share/snmp, Placed all HP mib to the mib dir. /usr/share/snmp Used mib browser to walk., I am getting data for default mibs, but

Isolate USM users by context or groups

Dear List members, I am trying to make a SNMP proxy for multiple users, and each user is only allowed to access the proxy directive assigned to that account, but with the config i've made all usm users can connect to all contexts. How can I let customer1 deny connecting to the proxy line at

Supressing the IP addresses in the SNMP payload at the monitored equipment

Hi, Is there is a possibility suppressing the IP addresses in the SNMP payload at the monitored equipment. In another words, only packet header should contain host IP address, however content of the file should not contain the IP address and hostname of the device. Is it passable to configure?

Strange issue with SNMP traps

Hi, I run in the strange issue which I don't understand. version: net-snmp-5.7.2-37.el7.src.rpm I am able to send SNMP traps however if directive (1) createUser is present only (2) defaultMonitors and linkUpDownNotifications will be sent. When I remove this directive I am getting remaining

How to preserve SNMP trap IP address and host name when forwarding

>I need help, with preserving SNMP trap IP address and hostname when forwarding >SNMP traps through snmptrapd >I got 10 servers behind a firewall and router, I have setup SNMP trap >forwarding and GET based on community string however, snmptrapd rewrites trap >headers, IPs and host name with

Re: How to preserve SNMP trap IP address and host name when forwarding

Hi I got exactly the same problem and wrote a patch. You will need to recompile net-snmp from sources though. Patches and instructions here - sourceforge.net sourceforge.net They are for net-snmp-5.7.3, I didnt have a chance to test them on 5.8 yet. Pik Master Dnia 10

RE: Having mismatch indexes for some interfaces in the IP-MIB and IF-MIB

Hi Experts, Your inputs on this issue is much appreciated.. Thanks, Kiran From: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Sent: 09 April 2019 23:45 To: 'net-snmp-users@lists.sourceforge.net' Cc: Anil Kumar Thumma -X (athumma - HCL TECHNOLOGIES LIMITED at Cisco) ;

Re: response time snmptranslate

I assume you are using the snmptranslate to convert your input from OID to MIB format? If so, The snmptranslate does parse the entire MIB file every time which takes time depending on the size of your MIB file and this cannot be avoided. The problem is compounded when you have more than one MIB

response time snmptranslate

Hi... Hello, I'm using a program called Telegraf, this program has an SNMP input plugin for collecting information, I can pass as a table parameter. On my operating system I have loaded MIB files from an equipment vendor I work with and configure Telegraf to use a table of one of those files.

Re: How to preserve SNMP trap IP address and host name when forwarding

If this is specific to only 10 servers, you could configure NAT on snmp proxy for these 10 servers to do address spoofing? Sent from my iPad On 10-Apr-2019, at 8:59 PM, 700 grm <700...@gmail.com> wrote: Hi, I need help, with preserving SNMP trap IP address and hostname when forwarding SNMP

How to preserve SNMP trap IP address and host name when forwarding

Hi, I need help, with preserving SNMP trap IP address and hostname when forwarding SNMP traps through snmptrapd I got 10 servers behind a firewall and router, I have setup SNMP trap forwarding and GET based on community string however, snmptrapd rewrites trap headers, IPs and host name with SNMP

RE: Having mismatch indexes for some interfaces in the IP-MIB and IF-MIB

Hi Experts, Please help me on this. >From the links below, I see the fix is available for quite some time, but it has not been integrated into net-snmp latest open source codebase, due to some reasons. https://bugzilla.redhat.com/show_bug.cgi?id=114413

Re: SNMPv3 docsis setup

In fact I have all I need to generate auth and priv keys. 1. On prov server side must be generated public and private DH keys (openssl can do this) 2. Prov server public key must be passed in SnmpV3MgrPublicNumber to CM. 3. CM calculates own public key and sets it in

RE: Having mismatch indexes for some interfaces in the IP-MIB and IF-MIB

Hi Experts, Could you kindly help on this request please. Thanks, Kiran From: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Sent: 01 April 2019 19:02 To: net-snmp-users@lists.sourceforge.net Cc: Anil Kumar Thumma -X (athumma - HCL TECHNOLOGIES LIMITED at Cisco) ; Naresh

Having mismatch indexes for some interfaces in the IP-MIB and IF-MIB

Hi Experts, Our Product is currently using Net-snmp 5.7.3, and we are hitting an issue with mismatch indexes for some interfaces in the IP-MIB and IF-MIB. Our DE could find the same issue was already discussed earlier through below topics in open forums.

Force snmpd to only respond to authPriv requests.

Is there a way, in snmpd.conf to force snmpd to only respond to authPriv requests? Thx! ___ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options:

SNMPv3 docsis setup

Hi I need to configure snmpv3 on CM. I've added tlv34 in provisioning file: SnmpV3Kickstart { SnmpV3SecurityName "docsisManager"; SnmpV3MgrPublicNumber 0x12345678; } CM receives auth/priv keys. Now I need to see my keys to send snmp requests

RE: snmpd[20456]: %WAAS-UNKNOWN-3-899999: truncating integer value > 32 bits

Hi Experts, Could you kindly help on this. Thanks, Kiran From: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Sent: 13 March 2019 23:23 To: 'net-snmp-users@lists.sourceforge.net' Subject: snmpd[20456]: %WAAS-UNKNOWN-3-89: truncating integer value > 32 bits Hi

Does Net-snmp 5.7.1 work on RHEL7 x86_64 ?

Hello all, I am trying to build net-snmp 5.7.1 (with some custom code) on RHEL7 x86_64. I am getting bunch of lmsensor related errors like below. hardware/sensors/lmsensors_v2.c: In function 'netsnmp_sensor_arch_load': hardware/sensors/lmsensors_v2.c:19:5: error: unknown type name

Seeing duplicate authentication traps

Greetings, We are testing the authentication failure trap and trying to login with wrong credentials every second. However, for every login, we receive 2 traps. Any idea how to remedy this and only get one trap? Thanks, 12:21:15 (TRAP2, SNMP v3, user myRwUser, context ) TRAP 0.0 (Cold Start)

errors while make net-snmp-5.8

Hi all, I have tried to build net-snmp-5.8 source code but when following the INSTALL procedure i got errors : My config: Linux : Red Hat Enterprise Linux Server release 7.4 (Maipo) Kernel : 3.10.0-693.el7.x86_64 gcc version 8.2.1 20180905 (Red Hat 8.2.1-3) (GCC) steps i have done : 1) sh

snmpd[20456]: %WAAS-UNKNOWN-3-899999: truncating integer value > 32 bits

Hi Experts, Our customer reported below messages. Customer want to know the impact and how to stop them. -- Mar 10 16:35:03 10.137.33.13 2019 Mar 10 07:35:10 snmpd[20456]: %WAAS-UNKNOWN-3-89: truncating integer value > 32 bits Mar 10 16:35:40 10.137.33.13 2019 Mar 10

Re: SNMP over NAT

Am 11.03.19 um 14:15 schrieb Kes Smith: > I have a laptop I often use while outside the house ie on the WAN side of > the home modem router. > I have a raspberry pi on the inside of the houseie on the LAN side of > the home modem router. > The raspberry pi is running NET-SNMP version 5.7.3.

SNMP over NAT

I have a laptop I often use while outside the house ie on the WAN side of the home modem router. I have a raspberry pi on the inside of the houseie on the LAN side of the home modem router. The raspberry pi is running NET-SNMP version 5.7.3. I can snmpwalk all the MIBs of the raspberry pi

Re: Problems upgrading 5.7.3 to 5.8

Hi Dave, check if the snmpd log file gives you any hint Regards Anders Wallin On Thu, Mar 7, 2019 at 11:20 PM Dave C wrote: > Hello, > > I have a device (debien/arm) that has been running fine under > net-snmp 5.7.3. An external audit recommended upgrading to 5.8, so wanting > to avoid a

Problems upgrading 5.7.3 to 5.8

Hello, I have a device (debien/arm) that has been running fine under net-snmp 5.7.3. An external audit recommended upgrading to 5.8, so wanting to avoid a black mark on the report I am attempting to upgrade it. First of all, I wonder if any guide exists / common gotchas around moving to 5.8?

NET-SNMP over NAT

Hi, I have a router with a WAN side and a LAN side. On the LAN side is a rasppberry pi running net-snmp. I wish to access the net-snmp stack trom the WAN with a `snmpstatus` command. The problem is outlined in detail here

Re: snmptrapd and snmpv3 informs from Junos

Hi, don't know if it's a negotiation but I think need to have the engineID set in the inform message I have appended a tarball with messages, conf,logs and pcap from where I did run a similar test with snmpd and snmptrapd. The conf files includes a bunch of other stuff not needed for this case,

Re: snmptrapd and snmpv3 informs from Junos

Hi Anders. Thank you for answering. Is the engineID actually ever *negotiated*? I had the understanding this was unilaterally configured, either statically or automatically. Is my understanding of this mechanism incorrect? My reasoning for using informs in the first place was that the receiver

Re: snmptrapd and snmpv3 informs from Junos

Hi Dag, try to not set the engineID in the snmptrapd.conf and let snmptrapd and Junos negotiate the engineID createUser -e 0x80001234 authpriv2 SHA xyzzy188 AES xazzza18 -> createUser authpriv2 SHA xyzzy188 AES xazzza18 Looking at the pcap file snmptrapd sends the engineid = 80001f88., but

snmptrapd and snmpv3 informs from Junos

Hi. I am trying to convince snmptrapd to receive snmp v3 informs from Junos (Juniper Networks' BSD-variant on switches and firewalls). The idea was to use informs rather than traps, so I could : - have encryption in place. - avoid having to update the snmptrapd config for every new device

Re: Proxy snmp v3 to snmp v2c

Hi all, If the proxy settings will be defined with SNMPv3 support in /etc/snmp/snmpd.conf file of Net-SNMP API, it is needed to define authentication passphrases and encryption keys as hard-coded such as the following example; proxy -Cn ctx_host3 -v 3 -u sampleUser -a SHA -A authPass -x AES -X

RE: AgentX reconnect time

Thank you, sir. You are a gentleman and a scholar. I am using 5.8 All the best, Mostafa From: Anders Wallin Sent: Friday, February 22, 2019 2:56 AM To: Mostafa Kassem Cc: net-snmp-users@lists.sourceforge.net Subject: Re: AgentX reconnect time It's not working in 5.7.3 either and w/o the

Re: AgentX reconnect time

https://sourceforge.net/p/net-snmp/bugs/2926/ Anders Wallin On Fri, Feb 22, 2019 at 2:08 PM Mostafa Kassem wrote: > Thank you, sir. You are a gentleman and a scholar. > > > > I am using 5.8 > > > > All the best, > > > > Mostafa > > > > *From:* Anders Wallin > *Sent:* Friday, February 22, 2019

Proxy snmp v3 to snmp v2c

Hi, I am trying to configure Net-SNMP to accept incoming SNMP v3 requests at proxy agent and forward the requests to other internal application servers. I have investigated and read tons of comments but I could not find how to query the proxy agent with SNMP v3 and enforce proxy agent to parse

Re: AgentX reconnect time

It's not working in 5.7.3 either and w/o the possibility to us "-c" option for the agent. So it's broken!! Regards Anders Wallin On Fri, Feb 22, 2019 at 7:44 AM Anders Wallin wrote: > Hi Mostafa, > > which version of net-snmp are you using? > In 5.8 you can use the "-c" option which works,

Re: AgentX reconnect time

Hi Mostafa, which version of net-snmp are you using? In 5.8 you can use the "-c" option which works, but I also found a bug in it using the default paths *# ./mysubagent -h * USAGE: ./mysubagent [OPTIONS] OPTIONS: -c FILE[,...] read FILE(s) as configuration file(s) -C

RE: AgentX reconnect time

Thank you for your reply, Anders. I created an agentx.conf file with this single line: agentxPingInterval 5 I tried putting agentx.conf into one the following directories to no avail: /var/agentx/ /var/snmp/ Var/net-snmp/ Where should the agentx.conf file go? I did a search on this topic and

Re: AgentX reconnect time

Hi Mostafa, you need to set it in the config file for your agentx(e.g agentx.conf), not in snmpd.conf Regards Anders Wallin On Thu, Feb 21, 2019 at 1:22 AM Mostafa Kassem wrote: > When we restart the snmpd, the agent detects that the snmpd is no longer > running and disconnects, waits 15

AgentX reconnect time

When we restart the snmpd, the agent detects that the snmpd is no longer running and disconnects, waits 15 seconds and then connects to the snmpd again. AgentX master disconnected us, reconnecting in 15 I would like to reduce this time to 5 seconds. Is this time specifieded in

Minor typo in mib2c-update man page

Hello, I hope I am sending this to the write mailing list, but the current version of the mib2c-update man page has a typo in it, where 'mib2c-updaterc' is spelled 'mib2c-udpaterc'. Thanks, -- Sincerely, Kole Swesey *Iowa State University | *Computer Science *Information Assurance Student

Can snmpd be configured, built and installed to run with specified user and group

I've solved my problem. snmpd provides the -u and -g command line switches. After startup, it will switch to the userid and groupid provided. It's dynamic config files will be created and accessed using this user and group. To enable remote configuration, I needed to be able to run

Can snmpd be configured, built and installed to run with specified user and group

Is there a way to configure, build, install and run snmpd with a specific user and group? Something other than root:root, thx. ___ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change

RE: nsNotifyRestart traps generated in place of link up/down.

Hi Experts, Could you kindly help with your inputs on this and how to recover from the problem. Thanks, Kiran From: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Sent: 08 February 2019 23:49 To: 'net-snmp-users@lists.sourceforge.net' Cc: Sreenivasa Reddy Pappuri -X

Unsubscribe

___ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Problem sending traps

Greetings, Our trap sink parameters are modified per 2 MIB entries, one for the IP address and one for the port. We would like to set the trap sink programmatically on powerup and when we receive an snmp request. On powerup and every time we receive a request to change the trap sink IP address

nsNotifyRestart traps generated in place of link up/down.

Hi Experts, In our product we are using Net-snmp 5.7.3 and today a customer is hitting a strange issue with some undesired nsNotifyRestart traps being generated, in place of link up/down traps, when performed shut/noshut operations on selected intetrface. Here is the SNMP v1 config Used by

Net-SNMP latest Version Information

Hi, My name is Sheru Chindaliya with Wells Fargo in division of Application Products Center of Excellence, I am the Patch Research Analyst for the products within our company, Wells Fargo Bank NA. This is part of regular exercise to identify latest patches/versions of this product in each

Segementation fault open_agentx_session () from /lib/libnetsnmpagent.so.30

Hi All, My Centos has two subagents and snmpd v5.7.3 get segmentation fault instantly as I run it with : snmpd -f -Lo -C --rwcommunity=public --master=agentx udp:161 but plain snmpd works with no issues: snmpd -f -Lo -C --rwcommunity=public udp:161 So suspect is subagent. I traced similar

net-snmp v5.7.3 LTS branch checkout

Hello All, To get net-snmp v5.7.3 LTS branch which branch should I checkout from its git checkout ? I used below link to get checkout : http://net-snmp.sourceforge.net/wiki/index.php/Git and clone command was : git clone git://git.code.sf.net/p/net-snmp/code I used branch : V5-7-patches

Re: too many imported symbols

On 1/28/19 11:07 PM, Ken Barclay wrote: Hi, Getting the above error with a Huawei MIB. I found a solution from 2007 that says, "Change MAX_IMPORTS on line 3552 of snmplib/parse.c from 256 to something like 512 instead" However, snmplib/parse.c doesn't seem to exist in my system.  Any idea

too many imported symbols

Hi, Getting the above error with a Huawei MIB. I found a solution from 2007 that says, "Change MAX_IMPORTS on line 3552 of snmplib/parse.c from 256 to something like 512 instead" However, snmplib/parse.c doesn't seem to exist in my system. Any idea how I can get past this hurdle?

Re: snmpwalk problem

Hi Jean Marc, I am trying to get the counter value in order to use it on a cacti graph. I have tried the snmpget command but still the same result snmpget -v2c -c public localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115

RE: Reg AES128 Support with Netsnmp 5.7.3

Thanks Bill for the pointer Regards, Kiran From: Bill Fenner Sent: 25 January 2019 01:30 To: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Cc: net-snmp-users@lists.sourceforge.net; Anil Kumar Thumma -X (athumma - HCL TECHNOLOGIES LIMITED at Cisco) Subject: Re: Reg

Re: Reg AES128 Support with Netsnmp 5.7.3

You can try http://net-snmp.sourceforge.net/wiki/index.php/TUT:SNMPv3_Options#Configuration but replace "DES" with "AES". Bill On Thu, Jan 24, 2019 at 12:27 PM Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) wrote: > Thanks a lot Bill for your kind response. > > > >

RE: snmpwalk problem

Hi Elie, In my comprehension of SNMP, I use snmpwalk to get all the" leaves" of a "branch" (and "under-branches"), and snmpget to get a specific "leave" of a branch. So snmpwalk localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115 make not really sense, or am I wrong ? I

RE: Reg AES128 Support with Netsnmp 5.7.3

Thanks a lot Bill for your kind response. Could you please help us with the configuration change required on Agent side. Thanks, Kiran From: Bill Fenner Sent: 23 January 2019 05:56 To: Kiran Kumar Pamula -X (kpamula - HCL TECHNOLOGIES LIMITED at Cisco) Cc:

snmpwalk problem

Hi Team, I am having a problem when retrieving the value of dynamic counters having an index greater than 114 as shown below on my Linux box snmpwalk -v2c -c public localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115

Re: Reg AES128 Support with Netsnmp 5.7.3

> On Jan 22, 2019, at 12:26 AM, Kiran Kumar Pamula -X (kpamula - HCL > TECHNOLOGIES LIMITED at Cisco) via Net-snmp-users > wrote: > > Hi Experts, > > Could you please confirm if AES128 is fully supported with Net-snmp 5.7.3 Yes, it is. Did you configure the user to use AES on the agent

Reg AES128 Support with Netsnmp 5.7.3

Hi Experts, Could you please confirm if AES128 is fully supported with Net-snmp 5.7.3 >From code references in Netsnmp 5.7.3, we see support exists, but when executing snmpwalk it fails in AES, rather it succeeds with DES as below: AES: (Doesn't Work) hostname# snmpwalk -v 3 -u SolarWinds-Auth

Re: Latest v3 configuration documentation

Thanks Kalim, that worked. Just for reference to anyone else on the list. I started fresh from a clean install of net-snmp (Embedded linux build of yocto poky with net-snmp included) Booted my image systemctl stop snmpd.service net-snmp-config --create-snmpv3-user -a "testuser1ABCD" testuser1

Re: Latest v3 configuration documentation

I had tried this long back but had got the same issue initially. Looks like the v3 user at source isn't created properly. Check if you have the v3 user line in snmpd.conf. If not you can stop snmpd, add the v3 user manually and save the file and then start snmpd service. Once done try the same

Latest v3 configuration documentation

Is the latest v3 configuration documentation here? http://www.net-snmp.org/docs/README.snmpv3.html Attempted the example exactly and get: snmpget -v 3 -u testuser1 -l authNoPriv -a MD5 -A testuser1234 localhost sysUpTime.0 snmpget: Unknown user name (Sub-id not found: (top) -> sysUpTime) Or is

SNMPV3 Inform not working on 5.7.3

Hi Team, I'm using netsnmp 5.5 and INFORMS works perfectly fine. When install 5.7.3, i see some issues with Informs. When there is a inform sent from my agent , Manager where 5.7 is installed sends a packet with wrong engineID (looks like some dynamically created engineId) . Bcz of which inform

snmptrap command line oid option missing

Hi everybody, I'm using the snmptrap 5.2.5.1 utility on linux device. I need to specify the oid of the second varbind "snmpTrapOID.0" and I've seen in https://www.ibm.com/support/knowledgecenter/en/ssw_aix_71/com.ibm.aix.cmds5/snmptrap.htm that there is a -o oid option to do that. But this one

Limiting MIB access to snmpd

I have built the snmpd and a custom agentx sub agent. When I compiled the daemon and sub agent I specified the with mibs: --with-mibs=SNMPv2-MIB:RFC1213-MIB:SNMP-VIEW-BASED-ACM-MIB:SNMP-COMMUNITY-MIB:SNMP-FRAMEWORK-MIB:SNMP-MPD-MIB:SNMP-USER-BASED-SM-MIB:My-MIB:My-4K-EVENTS-MIB:My-4K-MIB \

Re: Can we still contribute to Net-snp?

On 12/1/18, Pravin Singh wrote: > Hello, > > Can somebody please tell me if the community is still active? I don’t see > any commits after 2011. If its not, I would like to use and contribute > net-snmp into my commercial application. How can I contribute to this > community? probably start

Can we still contribute to Net-snp?

Hello, Can somebody please tell me if the community is still active? I don’t see any commits after 2011. If its not, I would like to use and contribute net-snmp into my commercial application. How can I contribute to this community? Regards, Pravin Singh

MIB 64bit counter

Hi Support, How do we get MIB 64bit counter, since we are running 6TB memeory machine, which reporting -ve vaule. Please suggest the appropriate solution. Thanks, Pradeep Kumar A ___ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net

Dual Interface Support for Net-SNMP - standard eth0 and custom interface

I am using Net-SNMP in an embedded radio, and it is nominally connected to the wired interface as eth0. However, I want to be able to "dual interface" Net-SNMP so that it will respond to two interfaces, the standard Linux eth0 wired interface, and a proprietary wireless interface (which is

No objects available when smux enabled

Hi, I'm using NET-SNMP version: 5.7.3 on Debian 9 When smux is enabled, I get ccitt.1 = No Such Object available on this agent at this OID when trying to walk through object tree. snmpd run with command: /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I smux mteTrigger

Upgrading from 5.7.2.1 to 5.8

Hello, when I upgraded from net-snmp 5.7.2.1 to 5.8 our build broke: snmp/libsnmp.a(alarmTable.o): In function `alarmTable_set_community': /home/esc123/work/rsm_sw/ptxdist/platform-esc0201/build-target/sc-0.1/snmp/alarmTable.c:378: undefined reference to `vacm_parse_rocommunity'

upgrade from 5.7.2.1 to 5.8

Hello, When i upgraded from net-snmp 5.7.2.1 to 5.8 our build broke: snmp/libsnmp.a(alarmTable.o): In function `alarmTable_set_community': /home/esc123/work/rsm_sw/ptxdist/platform-esc0201/build-target/sc-0.1/snmp/alarmTable.c:378: undefined reference to `vacm_parse_rocommunity'

RE: Application crashed at init_snmp

Hi Sudhagar, I am running version 5.7.2.1 and just dealt with the issue of init_snmp() crashing my application for a couple of weeks. It was finally tracked down to an issue with MD5 and FIPS-enabled OpenSSL. I searched online and found the following patch, which solved my problem:

Application crashed at init_snmp

hi Would you please help here. I having issues at init_snmp() function call crash the application. Still no clue why it crashes and how to figure out where its went wrong .. Currently i am stuck with this. How to enable the logging for snmp which could help to trace init_snmp. Thanks, With

Re: net-snmp 5.8 package or website has the wrong GPG key

Hi Lee, The point is the GPG key found on the net-snmp website has the wrong key. I can quite easily download the key off the keyserver but the point is not that someone signed the package using some random key uploaded to a keyserver, but it was signed by the correct key. For better or worse,

Re: net-snmp 5.8 package or website has the wrong GPG key

On 11/29/18, Craig Small wrote: > Hi Lee, > The point is the GPG key found on the net-snmp website has the wrong key. I just did a not-so-quik-test moving my existing gnupg info out of the way and you're right - I can't get from the key on their web page to a key that verifies the package just

Re: net-snmp 5.8 package or website has the wrong GPG key

On 11/27/18, Craig Small wrote: > Hi, > The 5.8 tarball is signed with one key and the GPG key available on your > website is another. > I assume that its just you using a new key, but for now I won't be updating > the Debian packages until I'm sure they're ok. Maybe you need to refresh your

Re: net-snmp.com : Fixing technical issues over the website!

Hi net-snmp.com, My name is Alisha Wilson , and I'm a SEO Specialist. Most of the people share their anger and frustration once they get my email. But let me show you how there is so many bugs (like broken links, pages that returned 4XX status code upon request, images with no ALT text,

net-snmp 5.8 package or website has the wrong GPG key

Hi, The 5.8 tarball is signed with one key and the GPG key available on your website is another. I assume that its just you using a new key, but for now I won't be updating the Debian packages until I'm sure they're ok. $ gpg net-snmp-admin.asc gpg: WARNING: no command supplied. Trying to guess

snmptable - WARNING: More columns on agent than in MIB

I've written my own agentX subagent, which populates some tables in a new MIB I've defined. All seems to be working; the tables have the expected data I can use snmpwalk and snmptable to browse the data. The thing I don't understand is that I see this warning when using snmptable WARNING:

Internal openssl and Windows

My code baseline uses OpenSSL with FIPS enabled, which doesn't allow me to use MD5 authentication, required to talk to my device. I'm wondering if I can build a Windows netsnmp library using the internal OpenSSL and have it be compatible with the rest of my application that loads the

Does the Agent prioritizes traps and slow the Gets execution ? Is it agent configuration?

Hi. I'm using Net-SNMP Version: 5.7.3. My sub-agent is running into a network device used in fiber optic networks. The device is an OLT. The sub-agent is implemented in the ZebOS operation system (Linux zebos 3.16.7). This sub-agent uses the AgentX implemented in the ZebOS too. The Agent

Invalid default target

Using "trapsess" in snmpd config file gives "Invalid default target" messages in the logfiles Simple test; $ export SNMP_SAVE_TMPDIR=yes $ ./RUNFULLTESTS -g default -r T031snmpv3dynamictrap_simple $ grep Invalid /tmp/snmp-test-T031snmpv3dynamictrap_simple-*/snmp*.log

Re: clientAddr ipv6

On Mon, 2018-10-29 at 09:52 +0530, Pushpa Thimmaiah wrote: > Hi All, > I am using option 'clientAddr' with IPv6 address and noticed that it is not > working. > so I applied patch > https://sourceforge.net/p/net-snmp/mailman/message/33064273/ on 5.7.3 but It > seems not working. > Kindly let me

Re: clientAddr ipv6

On 10/29/18 9:34 PM, Pushpa Thimmaiah wrote: Thank you.  I  will verify. Does the patch works for IPv6 too? Oops, I had overlooked that your example uses an IPv6 client address. Can you verify whether the following (untested) patch helps (checked in yesterday on the v5.8 and master branches):

Re: clientAddr ipv6

Thank you Bart. I will check. Regards, Pushpa.T On Tue, Oct 30, 2018 at 10:34 AM Bart Van Assche wrote: > On 10/29/18 9:34 PM, Pushpa Thimmaiah wrote: > > Thank you. I will verify. Does the patch works for IPv6 too? > > Oops, I had overlooked that your example uses an IPv6 client address. >

RE: Starting snmpd from WiX installer on Windows?

I figured it out looking at the code. The service MUST be called "Net-SNMP Agent". -- Aaron From: aaron.frie...@non.keysight.com Sent: Tuesday, October 30, 2018 10:25 AM To: net-snmp-users@lists.sourceforge.net Subject: Starting snmpd from WiX installer on Windows? All, Working on a project

Starting snmpd from WiX installer on Windows?

All, Working on a project that includes Net-SNMP and want to add the components to an existing WiX-based MSI installer, with snmpd running as a service. Has anyone done this before, or can provide pointers on configuring snmpd as a service, and so that it starts during install? I prefer to

Cannot Install Net-SNMP to HP Windows 10 Laptop

I have tried to install Net-SNMP to my Windows 10 HP laptop. Every time I go through the installer process it stops to tell me "Your PATH variable could not be read, probably because it is longer than 1024 characters (installer limitation). Please add the folder C:\usr\bin to your PATH using the

Re: clientAddr ipv6

Hi Bart, Thank you. I will verify. Does the patch works for IPv6 too? Regards, Pushpa. T On Tue, Oct 30, 2018 at 4:27 AM Bart Van Assche wrote: > On Mon, 2018-10-29 at 09:52 +0530, Pushpa Thimmaiah wrote: > > Hi All, > I am using option 'clientAddr' with IPv6 address and noticed that it

RE: netsnmp 5.7.1

Hi Klemen, I have already figured out. Thanks a lot! With Best Regards, Chris LIU Thales Canada, Transportation Solutions 105 Moatfield Drive Toronto, Ontario Canada, M3B 0A4 http://www.thalesgroup.com Tel: +1 416 748 4424 ext. 4015237 Email:

clientAddr ipv6

Hi All, I am using option 'clientAddr' with IPv6 address and noticed that it is not working. so I applied patch https://sourceforge.net/p/net-snmp/mailman/message/33064273/ on 5.7.3 but It seems not working. Kindly let me know if I am missing any configurations. Eg: linux machine has ipv6

Re: netsnmp 5.7.1

Hi. How is your trapsink configured? RegK On Sat, Oct 27, 2018, 08:30 LIU Chris (CA) wrote: > I am using netsnmp 5.7.1, does it support v3 trap? > > From wireshark, it seems sending v2 trap > > > > > > With Best Regards, > > > > Chris LIU > > > Thales Canada, Transportation Solutions > 105

Re: netsnmp 5.7.1

yes netsnmp 5.7.1, does support v3 traps. On Fri, Oct 26, 2018 at 3:30 PM LIU Chris (CA) wrote: > I am using netsnmp 5.7.1, does it support v3 trap? > > From wireshark, it seems sending v2 trap > > > > > > With Best Regards, > > > > Chris LIU > > > Thales Canada, Transportation Solutions >

netsnmp 5.7.1

I am using netsnmp 5.7.1, does it support v3 trap? >From wireshark, it seems sending v2 trap With Best Regards, Chris LIU Thales Canada, Transportation Solutions 105 Moatfield Drive Toronto, Ontario Canada, M3B 0A4 http://www.thalesgroup.com Tel: +1 416 748 4424

Re: Reconnect subagent automatically

Hi Bill, Thanks for your reply. >then I recommend establishing the connection, sending the trap, and closing >the connection again, like the agentxtrap command does. I have referred agentxtrap code and found "snmp_select_info" to be interesting. I have passed the resultant fds ( fd to

Re: Reconnect subagent automatically

On Mon, Oct 22, 2018 at 1:01 AM Rajaa, Mukuntha (Nokia - IN/Bangalore) < mukuntha.ra...@nokia.com> wrote: > Hi, > > > I am using subagent mainly for "traps". So I am not using > "agent_check_and_process". > From what I understand, "agent_check_and_process" polls on to the > connection between

Building Net-SNMP with VS 2015

Has anyone got instructions for building Net-SNMP using MS Visual Studio 2015? I originally ran into issues with _snprintf redefinition in the net-snmp-config.h, file. Based on some googling results, I changed the related lines to: #if _MSC_VER < 1900 #define snprintf _snprintf #endif

<    3   4   5   6   7   8   9   10   11   12   >