Ora dico una sciocchezza: è possibile che il modulo isa-pnp necessario alla
tua scheda non sia installato? Nel mio caso è proprio così e alla prima
occasione glielo metto. Ho qualche dubbio sul come, ma ci proverò.
Luca
Mi rendo conto della pochezza del problema:
ho una scheda audio Opti che
Perchè mai bisogna sempre tenersi aggiornato su tutto certo che quando dopo
mesi di attesa finalmente esce mandrake 8.0 la scarichi dal sito compri le
riviste che contengono i cd e al momento dell'installazione si inchioda il
computer arrivo solo a una conclusione per il momento la mandrake deve
Il 10:38, venerdì 22 giugno 2001, Mealli Diego scrisse:
Perchè mai bisogna sempre tenersi aggiornato su tutto certo che quando
dopo mesi di attesa finalmente esce mandrake 8.0 la scarichi dal sito
compri le riviste che contengono i cd e al momento dell'installazione
si inchioda il computer
Mealli Diego wrote:
Ciao
un semplice consiglio, disinstalla la mandrake e installa la Red Hat che è
sicuramente più stabile e la 7.1 ..
i pareri sulle distro sono sempre moolto personali.
comunque, se la pensi cosi` della Mandrake, perche' frequenti questa ML?
Altra regola di buona
Ciao a tutti,
vorrei sapere se qualcuno di voi è riuscito a
modificare con successo il file .lcq.conf in modo da
farlo funzionare.
Io ho il problema esposto alla faq 3.11 di licq.org,
ma non ho ben chiaro come si fa
grazie a tutti
Salve,
ho un problemino con Bastille: se non lo disattivo (linuxconf - controllo -
pannello di controllo - verifica lo stato dei servizi - ecc) non mi funziona
la rete locale che è costituita da linux e winz via samba (..e funziona
benone!).
Ho provato a cambiare il file di configurazione
Il 20:46, mercoledì 20 giugno 2001, hai scritto:
ciao a tutti come sempre :)
allora ho cambiato scheda video e naturalmente X non parte, la scheda in
questione e' una Hercules 3D prophet 4500 Kyro non credo che sia supportata
dal pinguino...ora:
1. come faccio a configurare X?
2. posso
bisogno di un comando per riconfigurare la scheda video, ho provato
Non uso Mandrake però se non ricordo male al suo interno ha anche il comando
Xconfigurator di Red hat, provalo e al limite (visto che è migliore lo
strumento di Mandrake) dopo lanci di nuovo Hardrake.
Ferdinando
Ah! A proposito di sicurezza, visto che si parlava della redhat, mi pare che
sotto questo aspetto la penultima distro avesse qualche serio problema
Ci dovrebbe essere anche una specie di worm specializzato per i server
realizzati con la red hat che sfrutta una debolezza del
On Friday 22 June 2001 15:01, Gigi Cyber wrote:
Ciao a tutti,
vorrei sapere se qualcuno di voi è riuscito a
modificare con successo il file .lcq.conf in modo da
farlo funzionare.
Io ho il problema esposto alla faq 3.11 di licq.org,
mh parla di un problema della mirabilis con icq 2000
prova
usa la suse 7.2 che e meglio :)
- Original Message -
From: legion [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 22, 2001 1:39 PM
Subject: Re: [newbie-it] Red Hat
-Messaggio Originale-
Da: Mealli Diego [EMAIL PROTECTED]
A: [EMAIL PROTECTED]
Data invio:
I finally made AltGr key combinations work on my
Microsoft Elite Keyboard. But now the Windows key,
when pressed, freezes the keyboard. Can anyone
tell me what is the configuration for this key for
an xmodmap file ?
thanks in advance..
--
Eduardo Dominguez
Follow-ups to
I am trying to install X4.10 from RPM. I get a dependency
error for package perl(strict) which so far havent found
anywhere. Searching for that on google returns nothing
relevant.
--
edmz
Good day to let down old friends who need help.
Well, I'm hesitant so far to get my hands dirty
for fear of getting into a mess that I can't get out of ... I
had MandrakeLinux and the modem installed by a tech center
employee at CompUSA -- OS on Monday; modem on Tuesday after I
tried to get 4 old modems recognized. I'm completely new to
Linux,
My soundcard, a Yamaha OPL3 (inside a toshiba laptop - Satellite 2520)
is not detected by MD 8.0, though it was picked up as a compatable.sb in
hard-drake on ver 7.1.
Can someone tell me how i can get this sound card working once again
please? I was wondering wether i just needed to compile
Rita F. Koenigs [EMAIL PROTECTED] wrote:
big snip
In KDE, I went to the start menu,
Configuration/Networking/Netconfigurator. I
went, under Client Tasks, to the Name server specs/DNS...
There was an error with the current settings which mentioned how
/etc/resolv.conf needed to be
My soundcard, a Yamaha OPL3 (inside a toshiba laptop - Satellite 2520) is not
detected by MD 8.0, though it was picked up as a compatable.sb in hard-drake
on ver 7.1.
Can someone tell me how i can get this sound card working once again please?
I was wondering wether i just needed to compile
Hi List.
I used software update and updated the kernel and other software
for 7.2, all went well.
Sadly I didn't do it after installing the video drivers from
Nvidia as they wont the old version of the kernel.
Im very much a newbie and am unsure which way to go.
I got the source for the drivers
I had a problem with some windows software that added itself to my windows
sig file and made itself the home page, even if I changed my home page the
next reboot after it changed back. I wrote the company and explained that in
MY state it is a violation of the law to make unauthorized changes
I had a problem with some windows software that added itself to my windows
sig file and made itself the home page, even if I changed my home page the
next reboot after it changed back. I wrote the company and explained that in
MY state it is a violation of the law to make unauthorized changes
Hi
My previous letter was not so clear, sorry about that.
Anyway I have an old pentium 200, and i have a 10 gig
hard drive but the bios can only see 8 gig. I have
windows 95c on it. I then installed LM 8, suprisingly
it could see the other 2 gig so i installed it to
there. Unfortunately I couldnt
On Friday 22 June 2001 01:36 am, Eduardo Dominguez wrote:
I am trying to install X4.10 from RPM. I get a dependency
error for package perl(strict) which so far havent found
anywhere. Searching for that on google returns nothing
relevant.
I used XFree86-4.1.0-1mdk cooker rpms on 8.0 with
Hi,
on my Mandrake 8.0 system, nautilus cannot view any html document.
Everything else works fine. (e.g. pictures and text)
Even the local htmls on my computer dont work.
I always get the message that he got an error while he was starting to view
it.
What might that be? Any idea?
TIA Jan
Thank you, Eduardo. That helped, but I am now getting the following
error:
In file included from internal.h:5,
from ZAsyncLocate.c:15:
sysdep.h:54: conflicting types for `sys_errlist'
/usr/include/stdio.h:553: previous declaration of `sys_errlist'
In file included from
Taken from the cooker FAQ:
http://www.linux-mandrake.com/en/cookerfaq.php3
Cooker is the development version of the Linux-Mandrake operating
system, whose official producer and publisher is MandrakeSoft, Inc.
* MandrakeSoft homepage: http://www.mandrakesoft.com
* Linux-Mandrake:
If they are rpms then go to run level 3 (ctrl+alt+backspace) and log in as
root, then type: cd towherethedriversare
then: rpm -Uvh NVIDIA_kernel.xxx.rpm and
rpm -Uvh NVIDIA_GLX-xxx.rpm (whatever they are
exactly called). Then type: exit, startx, and see if
There's more to it than installing the RPMs. You have to edit
/etc/X11/XF86Config-4 to include
Load glx
in the Modules section, and change the line that reads Driver nv to
Driver nvidia
That should help.
Miark
- Original Message -
From: s [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Yes, somthing like that. But, I did not have this
before. I installed LM8 a month ago and didn't have
this problem until I reinatlled LM8 again
--- Jeffrey M. Reed [EMAIL PROTECTED] wrote:
On Friday 22 June 2001 01:14, OOzy Pal wrote:
Hello
My linux is on runlevel 3. Everytime I rum my
Jamie,
To play Tuxracer, you must make sure that
1) the stock driver for your video card supports accelerated graphics. (For
instance, the stock NVidia driver does not). I don't know squat about your
video card, so I can't help you any more here.
2) To use OpenGL, X must be OpenGL-ready via
i've had some decent success with good ol' StarOffice. a
lot of people hate that too...but hell man, these programs
are FREE.
me? i just run M$ Office and Flash and Photoshop using
WINE. and yes, it DOES work.
just my two cents
On Wednesday 20 June 2001 14:25, Bryan S. Tyson wrote:
On
I tried to upgrade some programs via rpmdrake, now broken.
How do I get them to a previous state?
I tried to upgrade nautilus, bad idea I suppose, now will only run as
root. It seems too many dependencies to uninstall and reinstall. How
do I revert to previous state?
For some reason vim will
Hello
I downloaded RealPlayer 8 from www.download.com. I
tried to install but I get a message saying package
already installed. I look for realplay, realplayer,
rplayer , with no help,
I type
find -name *real*, I get every name that has the word
real but not realplayer or somrhing similar. So
I have had sane 1.0.4 installed and have only been able to scan gray mode.
Color only gives a IO problem.
Mandrakes cooker now has version 1.0.5 of the sane RPM's as well as
version 0.78 of xsane. However, once I have removed the old software and
re-installed with the lastest version,
http://www.winehq.com/
read it...love it...learn it...
i would LOVE to help all you guys figure this out but
everyone's problems are going to be different. you all have
different PC's and different setups.
if you have any GENERAL questions about how to set up
Mandrake alongside Windows and
Hi all,
I don't usually send tests to mailing lists..
but I am getting mail from everywhere but these mailing list, so you can
understand my confusion...
apologies again
regards
Frank
Hello Jeff
Which version do your prefer the one from
www.winehq.com or the one from www.codeweavers.com.
--- Jeffrey M. Reed [EMAIL PROTECTED] wrote:
http://www.winehq.com/
read it...love it...learn it...
i would LOVE to help all you guys figure this out
but
everyone's problems are
Hello list,
Editor's Note RIP: Linux on the desktop. Ken Reichard mentions that it
is official that Linux on the desktop is dead. Is he the official who
decides? His standards? Linux is still evolving. Maybe the desktop isn't
ready yet but keep your eye on Mandrake. I'm sure the tide will turn
Talking about that message.
Yesterday I was installing some rpm but yesterday I reboot and the system
sometimes it looks work well.
RPMs: libvga..., glide..., quake2
I reboot and I was playing Quake2. OK.
Today when I reboot LM 8.0 I can´t get X works, only text console, and a
message
Hi,
Is it possible to have Kmail auto reply to any mail coming in addressed to
info@
I want the reply to be a short plain text message with two attached PDF files.
I used to be able to do this under Outlook when windows would run but don't
see any options to do it under Kmail.
Thanks in
Hi,
I am in the process of installing WP8 (download version) on Mandrake 8. I
know that there is file that absolutely must be upgraded for a successful
installation. I have seen mention made of it on this list. Before I get
started, does anyone remember which file it is that I am
Probably two. But now that I try it with one, the result
is the same: Cannot open SCSI driver
Does that offer any clues?
Miark
- Original Message -
From: Dave DeGear [EMAIL PROTECTED]
To: Miark [EMAIL PROTECTED]
Sent: Friday, June 22, 2001 5:22 PM
Subject: Re: [newbie] RE: [nwebie]
Frank:
Every so often, some randomly selected members are removed from the list
for some unknown reason. The only known cure is to resubscribe. (At
least its easier than reinstalling the OS).
Carroll
Franki wrote:
Hi all,
I don't usually send tests to mailing lists..
but I am getting
From: Tom Brinkman [EMAIL PROTECTED]
Subject: Re: [newbie] Install error
On Thursday 21 June 2001 08:15 am, Randy Kramer wrote:
One followup question: Must I restore those attributes for any
(functional) reason after the defrag? (I mean, is there any reason
something (in Windows)
Carroll,
Daniel Christle was right on. This is a partial quote that I really
liked from the article:
I think it's time to be careful and thoughtful on how the Linux
community portrays itself. This doesn't mean that we are to give up the
enormous amount of introspection that the community
I have 4 ethernet cards in my one server. Here's a breakdown of thier usage!
eth0 = static IP from a cisco uBR 924. This is used for my web server/ftp
server.
eth1 = dhcp from another cable modem for a game server
eth2 = dhcp from the cisco uBR924, internal network, for samba server
eth3 =
Hi everyone.
As one who enjoys messing with Linux, I dont risk my system by fiddling
with major updates or reconfiguring. Instead I have 3 different systems,
Caldera, Mandrake 7.2 and now Mandrake 8.0.
So it doesnt matter if I destroy one. What we need is a quick way of
restoring them.
Hi All
ok i'm using mandrake 8.0 it running ok but i had slow started to
run out of drive space on both windows and linux, so to fix this i have move
my windows
to a new drive so now linux is on /dev/hda and windows is now on /dev/hdb
Lilo is booting up ok for linux, but not for windows
First of all thanks to everyone in advance, and I apologize for the long
post!
I am unable to connect through my router to my cable modem. I subscribed
last week to Road Runner service here in the New York City area. In order to
set up a quick LAN I purchased a Netgear RT314 Gateway Router and 2
DEAr Sir,
I have a curious problem. I loaded MKL7.2 on my system and was working
properly. It has two SCSI harddisks of 8GB each with AIC Adaptec 7896
adapter and twin PIII500 processors.
When I tried to load MKL 8.0 on the same it stops at loading aic7xxx and
nothing happens for a long time and
When I boot, that first screen that lists all your hardware lists both CD
drives as PIO 4. Would that have anything to do with my problem? In other
words, should my CD-RW drive be anything else?
Are there any BIOS settings that may be interfering?
Thanks,
Miark
- Original Message -
After updating some files, vim was giving me the following error and not
starting up:
vim: error while loading shared libraries: libperl.so: cannot load shared object
file: No such file or directory
Uninstalling vim-enhanced fixed this, but I need vim-enhanced's PERL
interpreters. How should
Thanks - this worked. Kmix is now a panel icon as well when I start KDE...
Ed
At 02:49 AM Friday, 6/22/2001, bascule wrote -=
there is a kconfigkdesoundmixer dialog with a 'load volumes on login'
setting but i don't know if this launches the panel icon as well,
also a long winded way is to
On Thursday, Jun 21, 2001, Miark wrote:
Dennis, yes, I've got hdc=ide-scsi in its proper place.
You might check in /etc/fstab to make sure /mnt/cdrom is going for the
right device... here's mine (my CDRW is at /dev/scd0 also which
/dev/cdrom links to):
/mnt/cdrom /mnt/cdrom supermount
On Thursday 21 June 2001 20:16, Michael Scottaline wrote:
Rita F. Koenigs [EMAIL PROTECTED] wrote:
I have 8.0. I have been attempting to surf the internet
without
success -- after logging onto the network using KDE kppp.
I use http://www.nocharge.com, a free internet provider
On Fri, 22 Jun 2001, s wrote:
If they are rpms then go to run level 3 (ctrl+alt+backspace) and log in as
root, then type: cd towherethedriversare
then: rpm -Uvh NVIDIA_kernel.xxx.rpm and
rpm -Uvh NVIDIA_GLX-xxx.rpm (whatever they are
exactly called).
Hi all,
After boot and at the login prompt, I would get can't find module
char-major-180 and then can't find module char-major-4. It would scroll
on for a couple of screens with that message.
I read around and found out that 4 is related to the serial ports, and 180
is related to USB. I don't
Hello, Friends,
My computer uses Windows 98. After using Lnx4Win to install Linux-Mandrake
7.2, Windows 98 still runs well when I choose it. However, Linux-Mandrake
cannot start up if I take this choice. The following information is
displayed on the screen.
Request_module[block-major-7]:
On Friday 22 June 2001 22:16, Jianrong Yao wrote:
Hello, Friends,
My computer uses Windows 98. After using Lnx4Win to
install Linux-Mandrake 7.2, Windows 98 still runs well
when I choose it. However, Linux-Mandrake cannot start up
if I take this choice. The following information is
58 matches
Mail list logo