All,
I have finally got mdk 10 working on my Asus M6 laptop, but
frustratingly am missing the sound. Can anyone tell me how I might be able to
get around this? Mdk picks it up as a Intel Corp ICH4 845 G/GL Chipset AC97.
It is the only aspect (apaer from my soft modem) that I cant get to
the wrong tree).
Stevie :)
-Original Message-
From: Wayne Petherick [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 30, 2004 9:38 AM
To: [EMAIL PROTECTED]
Subject: [newbie] sound in mdk 10
All,
I have finally got mdk 10 working on my Asus M6 laptop, but frustratingly am
missing the sound
All,
I have downloaded some awesome icon themes from the
net (I really want to install crystal). I have
followed the instructions to the letter (pasted
below), but these do not work. Can anyone tell me how
to install icons you get from the net?
Thanks,
Wayne
Open the KDE-Menu an start the
,
Wayne
--- Damian [EMAIL PROTECTED] wrote:
El jue, 28-03-2002 a las 10:40, Wayne Petherick
escribió:
Damian,
thanks for the reply. I have gotten it to work,
but I
get errors related to not being able to find a
bootable cd-rom or floppy. Restart and try again.
I
didn't have these probs
Damian,
thanks for the reply. I have gotten it to work, but I
get errors related to not being able to find a
bootable cd-rom or floppy. Restart and try again. I
didn't have these probs before and figured it was
something to do with the recompilation. The devices
are set up and there, they
I just installed 8.2 and went to install VMware 3, but
it tells me it was not built for this kernel version.
It does allow you to try and rewrite the softare for
vmware, but it then tells me that gcc v. 2.96 is not
supported by the development team. Is anyone else out
there using VMWare 3, and
Has anyone here got vmware 3 and samba to work? I
have been through the setup shown in three different
texts, as well as half a dozen websites. I cannot get
XP to recognise the host filesystem. I have been
trying to use the support section on vmwares site, but
the whole site seems to be down.
All,
I am still having problems with my floppy, and in
trying to fix the problem today found that my cd rom's
don't work either! This is what I get when I try to
mount one (also found this out trying to play a music
cd).
[wayne@CPE-203-45-210-121 wayne]$ cd /mnt
[wayne@CPE-203-45-210-121 mnt]$
All,
I have just installed LM 8.1 and like it very much.
Except...I can't get my floppy disk working. I need
it under Vware to be able to boot into Win2k, and I
need it to be able to transfer files from one machine
to another. When I try to access it, it tells me fd0
is not a valid block
All,
I recently used the ximian install script to update to
gnome 1.4. Prior to this I had used red carpet to
update the system but owing to a few problems ended up
using the script instead. After using the script, the
system started to work very slowly (click netscape
button, hard drive light
Dennis type 'pico' followed by the file name. This is a terminal editor.
Wayne
I have just bought an optical mouse (LOgitech and USB) and cannot get it to
work under 7.2. Does anybody know how I can get this to work?
Thanks,
Wayne
John,
are you saying that with my Savage 3D to turn off acceleration in the
XF86Config file will get the card to work? I have tried the framebuffer
device and it works (though a little choppy and unaccelerated) at least I can
use my Lappie for Linux :) I am happy yo give this a try if you
Thanks very much for the help. I appreciate it immensely and will give this
a try.
Vive le Linux.
Wayne
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of - -
Sent: Wednesday, 8 November 2000 4:43 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Laptop and
I am after someones help in setting up 7.2 on my laptop. I have an Asus
L8000 series with an 8MB S3 Savage MX/VX video card. I cannot get 7.2 to
work with my video card even though it installs fine, but does die at the
install and configuration of XFree. Every resolution I try comes back with
I recently bought Quake 2 for linux only to fidn that I can't get it to work.
If I run it in software x11 mode, the screen is the size of postage stamp,
if i try to use any of the other acceleration modes (I have a Gefore 256 vid
card) it seg faults or core dumps and says that to run it in
I would REALLY like to install LM MDK 7.2 on my laptop but I got to the
installation of XFREE and hit some problems. When I tried to set my
resolution, monitor etc it kept telling me the device was busy or that the
colour depth I had chosen was not supported by my chipset. I run windows at
I have just upgraded to 7.2 and cannot get my BT848 capture card working. I
love the new distro, but when I launch kwintv or xawtv it either locks the
machine up, or won't let me change any settings, even as root.
Any thoughts?
Thanks,
Wayne
Howdy,
does anyone know whether or not I can use my usb scanner with Mdk 7.1 yet?
If so, what programs are usable to capture images?
Thanks,
Wayne
Quaylar,
I can and do. You have to use the SVGA XFree server.
Wayne
- Original Message -
From: "Quaylar" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 27, 2000 4:26 AM
Subject: [newbie] Asus AGP V6600 Geforce and Mandrake
hi all !
i recently searched the graphics
Hugo,
I have the same problem. There is no open windows buttons on my task bar. The
only way to restore them is to open my pager and do it that way. I would much
prefer to have the buttons back though. If anyone knows a fix, [we] would
aprpreciate it.
Wayne
Playing devils advocate her but when I originally installed MDK, I let
diskdrake do the work and it worked like a charm. Even did a fresh
install of windows after my last linux reinstall and everyting went sweet.
Sorry!
Wayne
On Thu, 1 Jun 2000, bascule wrote:
i second that, diskdrake
I recently purchased Corel WPO2K and think it is great. It comes with the
latest version of Corel Linux with it and I was wanting to install this to
a spare 3GB partition I have currently allocated to Windows. I ghave
partition magic 5 and so changing the partition is easy. Last time I did
Barry,
in command line terms the . is the functional equivalent of "this
directory". The / means the root or main directory off of that
indicated. So in effect the ./means the root of the current
directory. IN simple terms, it means the directory you are in! The
reason you do this is because
**
**
Wayne Petherick
Humanities and Social Sciences
Bond University
**
**
After installing LILO in my MBR I was wondering if there is
any way you can move it from there to the start of the linux
partition. I have some boot manager software I would like to use
but can't while LILO is sitting in the MBR.
Thanks.,
Wayne
the option there to boot from
floppy, MBR or root partition. I did this, installed my boot manager
software and voila, worked like a charm.
Thanks again,
Wayne
- Original Message -
From: Alan Shoemaker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Wayne Petherick [EMAIL PROTECTED]
Sent: Thursd
]
Sent: Thursday, May 11, 2000 9:30
PM
Subject: Re: [newbie] Down with
LILO!
Hi,
You can run fdisk /mbr that will take Lilo out , then install your boot
manger of chose. That's what I have done. Hope this helps
Robert F. Trettel
Wayne Petherick wrote:
After installing LILO in my
bvious that what I'm
doing is not the way]? Gary Prichard
--
*
*****
Wayne Petherick
Criminology Department
Bond University
*
*
Kpackage is for .rpm files. For the tar.gz file you
will need to run
tar -xzvf filename
This will untar the file and from there you will need to run the install
for the linux version of AR. Do you know xpdf can also read .pdf
files and is packaged with linux?
Wayne
At 09:20 AM 5/10/00 -0700,
Howdy all,
I have read all of the mutt and pine how to's and man pages that exist and
still cannot get either to work. I appear to have my fetchmail set up properly
in that it downloads my mail fine, but I do not know where to!!! I am guessing
that where it downloads it to is where I have to
Joe,
you could always try the various TNT cards that are out there. Most
of them will come in PCI and AGP so you should shop around.
Wayne
At 02:47 PM 5/3/00 -0400, you wrote:
The only decent PCI video cards on the market are the 3DFX VooDoo
cards but
even with those I don't think you can get
Anyone know of a good FREE vcd player for linux? I am trying to use an
unregistered MTV at the moment but the audio cuts out until it is registered.
THanks,
Wayne
:50 AM
Subject: Re: [newbie] OT - Partition magic
Wayne Petherick wrote:
This is OT so I will take it OLcould anyone here who has partition
magic v5 contact me off list please. Thanks,Wayne
Why is that OT? The subject is pertinent to this mailing list, because
this
list is about
This is OT so I will take it OLcould anyone
here who has partition magic v5 contact me off list please.
Thanks,
Wayne
I have just picked up a Studio PCTV Rave card which is based on the BT848
chipset. I have installed this in myt machine and cannot get it to work. I
know this is a bit OT, but if anyone here has a card like this, if they could
contact me off list to help me out I would really appreciate it. I
Kirk,
be careful with boot magic. I used it recently, removed one of the partitions
it had listed as a boot partition (which wasn't, ot was my primary slave -
a drive full of windows games!) and so removed the entry. It trashed the whole
disk and wiped all of my programs. I will never use it
b/web,
I will tell you how I set up my machine and hopefully this will help. I tried
setting up a small partition for the /boot information, a partition for
wind'ohs, and one for linux. As my /home directory is on another drive
this proved to be somewhat confusing. In the end, what I did was
b/web,
I used the dos fdisk to split the disk originally. Then I used a standard
format program to format the drive. It would be good if diskdrake was
available for general use but I don't think you can run it outside of a linux
install.
After Windows was installed I ran the setup for linux and
Patrick,
if you installed from a tar file you can use the make uninstall command.
Wayne
On Thu, 13 Apr 2000, you wrote:
Thank for the assistance,but what about zip files. How
do I uninstall those.
--- flupke [EMAIL PROTECTED] wrote:
Patrick Dyer wrote:
Can someone tell me how to
I have just been given a scanner for my birthday (21 again) and it is a Canon
USB model. Does great scans BTW. I was wondering whether I could get it to
work under Linux? I know that USB support is experimental but I would really
like to at least give it a try.
Any help would be appreciated.
Gustavo,
if you use the Sawmill window manager, you will get this effect.
Wayne
On Mon, 10 Apr 2000, you wrote:
Hello
I want that the windows sensibility in my linux ( mandrake 7.0 ) will
be like in UNIX , I mean
when is the mouse is the current window , and no like Windows I mean for
Just a question...how did you do this? My box is
sitting on a netwrok full time which is protected by a firewall.
Will this stop intrusions into my machine or do I need to set up
individual level security? I have tried various ip logging programs
but for someone whio is fairly illiterate to
filename="text1.rtf"
I used the pre-release version. It is still pretty
buggy.
Wayne
At 07:05 PM 4/5/00 +0100, you wrote:
Is there a beta of Netscape 6 for Linux, or is there only one for
Windows at
present?
Toni,
I am no expert but I will tell you that unless you are willing to learn at
least a bit of how Linux works then you really shouldn't be using it. First of
all, you will drive yourself insane, second of all, it does not run like
Wind'ohs. YOu will HAVE to learn about Linux file systems and
filename="text1.rtf"
filename="text1.rtf"
filename="text1.rtf"
Michael,
I would strongly recommend against using lnx4win to install on a windows
98 partition if thius is what you have in mind. The install and
operation of linux are slow and very painful. YOu are much better
off installing and running on a separare partition. If you aren't
familiar with this,
If you are using nortons it will dump your infrequently used
files at the end which will give your partioning software the impression
your drive is full. Try either telling it to place all files at the
beginning (or alternatively, none at the end) or remove it and then run
normal defrag which is
Alan,
thanks for the tip. I guess that is what another subscriber was
referring to as allocating X MB for /home, X MB for /usr etc etc...I
didn't know you could do that with Linux.
Also, whilst I have the soapbox, I would just like to say there has been
some flaming going on about people asking
52 matches
Mail list logo