Well - I have an install - did not get GUI up so obviously have a couple
of things to sort out. LILO worked great - so thank you to those who
helped. I'll reboot to Mdk and see what I can work out. Printer is
perfect!
Thanks
Rosemary
Kaj Haulrich wrote:
On Monday 07 February 2005 23:25, you
On Monday 07 February 2005 04:40, Rosemary McGillicuddy wrote:
Kaj Haulrich wrote:
happens. I rebooted with disc in situ and get the window with
the two options press F1' and enter to install Looked at F1
and then pressed enter. It appeared to start installing but then
the monitor went
On Monday 07 February 2005 23:25, you wrote:
Sometimes it refuses to boot from CD1, in that case try CD2,
it'll prompt you to change disks later on.
BTW two things :
1. please don't post in html. Most people here filter
html-messages out before they get read.
2. please remove your
Hi
I am attempting to install Mandrake 10.1 on an AMD Athlon 2000+ running
WinXP. I've been to hardware devices list but little detail as it was a
'pre-packaged' system. Display adapter VIA/S3G, legacy audio drivers.
I put the first disc in and the options highlight when I hover the
cursor.
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
I see that my post got lost in the discussion, so here goes again...
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all
I see that my post got lost in the discussion, so here goes again...
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all - I'm left with a blank screen, and nothing else happens.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like to search the archives for
booting from SATA disks
Anne
- --
Registered Linux User No.293302 (http://counter.li.org/)
Have
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like to search the archives for
booting from SATA disks
no, it's not SATA, it's a standard ATA133 hdd
--
Cyber
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 17:01, Cyber Killer wrote:
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Here is a list of my hardware:
cpu: P4 1700
ram: 256 MB RAMBUS
gfx: Radeon 7200 64 MB
snd: SB Live! Player 1024
hdd: Seagate Barracuda 7200 120 GB
dvd: LG GDR-8162B
cdrw: LG GCE-8524B
lan: Realtek RTL8139
+ some stuff connected to USB, a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 17:30, Elwyn wrote:
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Here is a list of my hardware:
Have you tried having unplugged your extra USB things incase there is a
problem there??
That's a good point. Setting them
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
+ some stuff connected to USB, a scanner, a printer,...
http://www.osnews.com/story.php?news_id=7320page=3
This chap has written a review on Mandrake 10 and has stated he's had problems
with the Hotplug feature... Usb Devices??
Cheers, Elwyn
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all - I'm left with a blank screen, and nothing else happens.
I had the same problem with 10.0, but then I thought I just
On Saturday 16 October 2004 10:08 am, Boyi Zeng wrote:
Hello,
Yesterday I tried to install mandrake linux 10.1 to my notebook.
The installation process is smooth. But I got problem at the startup
after installation. The error message is like that:
checking root partition:
fsck.ext3:
Hello, Thanks for your reply. I reinstalled mandrake, and choose LILO
as the boot loader, and then it worked. Since I installed Linux from
hard disk. there seems to be no method for me to edit the menu.lst or
the fstab. Anyway, the problem is solved. Thank you.
On Sun, 17 Oct 2004 07:40:32
Hello,
Yesterday I tried to install mandrake linux 10.1 to my notebook.
The installation process is smooth. But I got problem at the startup
after installation. The error message is like that:
checking root partition:
fsck.ext3: unable to resolve 'LABEL=/'
I had windows XP in my notebook
I got the following error while trying to install
the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should
reboot?
Any help would be great.
for some reason, try to burn the cd again.
Marcin
- Original Message -
From:
Steve
Turner
To: [EMAIL PROTECTED]
Sent: Friday, March 19, 2004 8:12
AM
Subject: [newbie] Installation
Problem
I got the following error while trying to install
the 64 bit version
ubject: Re: [newbie]
Installation Problem
I had the same error with a 32b version. Do
you install from CD? If so the cd you use might be bad. I tried to
do network install and it worked (well, I had a different error and I still
haven't installed the os, but that's different story). If
Hardware is all new.
- Original Message -
From:
Ayares, Mark
(Mark)
To: '[EMAIL PROTECTED]'
Sent: Friday, March 19, 2004 8:32
AM
Subject: RE: [newbie] Installation
Problem
Depending on how old the hardware is, I have had success with older
machine
On Friday 19 March 2004 10:12 am, Steve Turner wrote:
I got the following error while trying to install the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should reboot?
Any help would be great.
I agree about hitting 'f1', if you get that far, but if
On Sat, 2004-03-20 at 10:05, et wrote:
On Friday 19 March 2004 10:12 am, Steve Turner wrote:
I got the following error while trying to install the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should reboot?
Any help would be great.
I agree about
Dennis Myers wrote:
On Friday 05 September 2003 01:24 pm, [EMAIL PROTECTED] wrote:
Hi Tony,
I used that link. Many packages gave me the message:
The signature of the package xxx is not correct
No GPG signature package
Do you want to install it anyway?
Is there a
http://plf.zarb.org/~nanardon/urpmiweb.php .
Tony.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, September 05, 2003 8:14 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation problem.
Hi,
I went and installed the LM9.0 back. It worked fine unlike
On Friday 05 September 2003 01:24 pm, [EMAIL PROTECTED] wrote:
Hi Tony,
I used that link. Many packages gave me the message:
The signature of the package xxx is not correct
No GPG signature package
Do you want to install it anyway?
Is there a way to fix this?
Any hints anybody? I want LM9.1 to work on my machine, like win2k does
and LM9.0 did.
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many combinations of
Any hints anybody?
[EMAIL PROTECTED] wrote:
Shame, the win2k is working and the LM9.1 on the same machine is not.
[EMAIL PROTECTED] wrote:
Hi,
During installation of LM9.1, the graphics card was recognized
correctly (RIVA TNT2 with 32Megs) but the Futura monitor was not. Many
alternate
Hi,
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many combinations of
horizontal rate, vertical rate, resolutions and colors for custom
monitor
Shame, the win2k is working and the LM9.1 on the same machine is not.
[EMAIL PROTECTED] wrote:
Hi,
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many
Downloaded iso's Mandrake 8.2. System boots up from
CD-ROM OK.
Partitioned HDD using Pmagic into ext of 3000Mb and
swap of 512 Mb
Boot from CD, get into setup screen...
Get unrecoverable error concerning ramdisk almost
immediately after I get past the first screen (where setup options are
Hi there...
I've been watching this list for a few days now and all I can say is... if
you folks are newbies then I don't know *what* the hell *I* should be
called! ;o)
Anyway... on to my problem...
I've just tried a lnx4win install of Mandrake 8.1, but whilst it all went
fairly easily, there
I just downloaded the Mandrake Corp Server 1.0 for Sparc and installed to my
SparcStation 20 machine but failed.
Since I did not have keyboard/mouse and monitor for this machine, I
installed the Linux via the PC console connected to port A of the Sparc
machine.
The following is the
Title: RE: [newbie] Installation problem
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Frans Ketelaars
Sent: Tuesday, December 04, 2001 1:08 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation problem
On Mon, 3 Dec 2001 16:32:24 +0100
On Tuesday 04 December 2001 02:07 pm, you wrote:
On Mon, 3 Dec 2001 16:32:24 +0100
Helle Espen [EMAIL PROTECTED] wrote:
I have Dell inspiron 3800.
Have had Linux mandrake 7.? (1?) on it before without any problem.
Tried now to install LM 8.1, and I am not able to do it.
It hangs
I
have Dell inspiron 3800.
Have had Linux
mandrake 7.? (1?) on it before without any problem.
Tried now to install
LM 8.1, and I am not able todo it.
It hangs
whenit tries to use the CDROM (But it is able to use it
before.Strange..)
Can anyone please
help me?
Here comes what I
On Mon, 3 Dec 2001 16:32:24 +0100
Helle Espen [EMAIL PROTECTED] wrote:
I have Dell inspiron 3800.
Have had Linux mandrake 7.? (1?) on it before without any problem.
Tried now to install LM 8.1, and I am not able to do it.
It hangs when it tries to use the CDROM (But it is able to use it
Hi,
Happy thanksgiving and happy holidays !
I have installed Mandrake 7.0 on my machine. I wanted to upgrade that to 8.0
And I have downloaded mandrake 8.0 [all the three files] and burnt on 3 cds.
Now when I tried to boot the machine with new burnt CD it doesnot boot.
Can anybody suggest me how
civileme wrote:
On Sunday 28 October 2001 04:59, Robin Turner wrote:
I'm reinstalling Mandrake 8.0 and get the following problem while
assigning partitions:
Mount failed
No such device
This is happens two partitions: /dev/hda1 (vfat) and /dev/hda2
(reiserfs).
It also
I recently purchased a new PC (Athlon 1GHz on ASUS
A7V133, WD 30Gb ATA100 HDD) and wish to install LM7.2. After booting with
the CD inserted I specify a language and keyboard, then the installation program
searches for a SCSI drive before displaying the message:
An error has occured. No
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of T.P. Smith
Sent: Tuesday, April 10, 2001 7:09 AM
To: Linux Mandrake Help
Subject: [newbie] Installation Problem
I recently purchased a new PC (Athlon 1GHz on ASUS A7V133, WD 30Gb ATA100
HDD) and wish
Dear Experts !
I tried to install a Linux-Mandrake 7.2 from a
Linux USER (de) CD-ROM. My BIOS is set up to boot from CD-ROM.
After CD-ROM initialization phase of beginning,
unexpectedly an error message appears:
"Can't locate install2.pm in @INC (@INC contains:)
at /usr/bin/runinstall2
Hi everyone,
I'm a new Mandrake user from over in the SuSE-world, and I'm having trouble
getting Mandrake to install properly. The main problem I'm encountering, is that
it seems that the boot loader is never installed. When it gets to the step to
install it, it simply says "Can't divide HASH
When I attempt installation of Mandrake Linux 7.1with DrakX it freezes when
attempting to detect my hard disk. It's an IDE and set for LBA in the BIOS
(whatever that means) I have a Celeron 566, HD is 20 megs with 2Meg drive
set up for windows. Can anyone help me?
Sincerely,
Jim
I have a Celeron 566, HD is 20 megs with 2Meg drive
set up for windows. Can anyone help me?
Sincerely,
Jim
You mean a 20Gig HD and a 2Gig partition for windoze, don't you??
Prior to your attempt to install LM did the drive work under windoze? Is you
MB running an ATA-66? LM doesn't
PROTECTED]
Subject: [newbie] Installation problem
When I attempt installation of Mandrake Linux 7.1with DrakX it freezes when
attempting to detect my hard disk. It's an IDE and set for LBA in the BIOS
(whatever that means) I have a Celeron 566, HD is 20 megs with 2Meg drive
set up for windows. Can
Dear Chris and Clayton
The installation freezes and I'm using a 20Gig Seagate Drive.
Thanks
Jim Williams
PROTECTED]
Subject: Re: [newbie] Installation problem
Dear Chris and Clayton
The installation freezes and I'm using a 20Gig Seagate Drive.
Thanks
Jim Williams
PROTECTED]
Subject: [newbie] Installation problem
I have the Linux Mandrake7.1 installation CD. The installation starts but it
keeps telling me «DO YOU HAVE ANY SCSI DEVICE ?» and I don't have one. I say
no but it keeps asking me that question. impossible to go any further. I
have on m
I have the Mandrake7.1 installation cd. When I boot with it,
installation process begins. But when it gets to the harddrive detection, it
asks me «Do you have scsi devices?» and I don't, so I answer no. It keeps asking
me this question over and over. There no way I can get any further. My
hello y'all, im a super newbie at this.. i recently downloaded mandrake 7.1
and was trying to install it earlier but then the installation screens were
messed up. all i could see from the messages were "ok" and "cancel" and the
rest of the borders of the dialogue boxes. these buttons and the
This may be a mute point, since it's been a fairly well established fact
that Linux and Western Digital drives don't like one another, but did you
boot the CD to start the install, or did you start from a boot floppy?
I've willing to bet though that what you're experiencing is that when
Linux
This may be a mute point, since it's been a fairly well established fact
that Linux and Western Digital drives don't like one another, but did you
boot the CD to start the install, or did you start from a boot floppy?
Ssshhdon't tell my WD153 that Linux doesn't like it. So far
a problem with Memory(RAM), this is just my 2
cents to try to help out.
Adam
- Original Message -
From: "Mark Weaver" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 03, 2000 7:45 AM
Subject: Re: [newbie] Installation Problem
This may be a mute point, since
October 03, 2000 7:45 AM
Subject: Re: [newbie] Installation Problem
This may be a mute point, since it's been a fairly well established fact
that Linux and Western Digital drives don't like one another, but did you
boot the CD to start the install, or did you start from a boot floppy?
I'
Mark Weaver wrote:
This may be a mute point, since it's been a fairly well established fact
that Linux and Western Digital drives don't like one another, but did you
boot the CD to start the install, or did you start from a boot floppy?
I've willing to bet though that what you're
On Tue, 03 Oct 2000, Mark Weaver wrote:
This may be a mute point, since it's been a fairly well established fact
that Linux and Western Digital drives don't like one another,
??Have I just been lucky? In the past 2 years I've installed 6 different
distros on 3 different systems with WD
Hello. Sorry to trouble you all, but I've been having a terrible time trying
to install Linux 7.0 Complete on a new Gateway 750 Pentium III system. First
I'll list the details about my system:
Processor and Motherboard: Intel Pentium III, 800 MHz
.
- Original Message -
From: "Brian Rourke" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 16, 2000 11:12 AM
Subject: [newbie] Installation Problem: No valid device for filesystems?
Hello. Sorry to trouble you all, but I've been having a terrible time
trying
to install
similarities are even more pronounced with the ATA100 cards. That's most
likely where your problem lies.
- Original Message -
From: "Goldenpi" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 16, 2000 7:29 AM
Subject: Re: [newbie] Installation Problem: No va
Xconfigurator to set up your video card.
-JMS
|-Original Message-
|From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
|Sent: Wednesday, June 21, 2000 1:20 PM
|To: [EMAIL PROTECTED]
|Subject: RE: [newbie] Installation problem: flashing login screen
|
|
| Not exactly sure I know what you mean
hiber" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 13, 2000 8:26 PM
Subject: RE: [newbie] Installation problem with 7.0
The video card is a Trident 9685 PCI with a voodoo 2 accelerater. How do
I
boot into text mode?
-Original Message-
From: Charles A Edwards [mai
I have a problem with the Mandrake 7.1 installation: When is reaches "Configure
X" it keeps prompting that it can't locate the RPM package "xfree86-" !?
I have tried Automated and Customized (Development) installation with the
same result.
I did not have any problems installing Mandrake 7.0 on
I am trying to install Mandrake 7.0 on a 200 with 32 megs of ram. I get to
the part here you pick which type of install you want (recommended, custom,
or expert), and when I pick one, my computer freezes. I don't know what the
deal is. If anyone can help me I would be thenkful.
What happens if you don't choose anything and let it do it's thing?
- Original Message -
From: "Phiber" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 13, 2000 7:24 PM
Subject: [newbie] Installation problem with 7.0
I am trying to install Mandrake 7.0 on a 2
t: [newbie] Installation problem with 7.0
I am trying to install Mandrake 7.0 on a 200 with 32 megs of ram. I get
to
the part here you pick which type of install you want (recommended,
custom,
or expert), and when I pick one, my computer freezes. I don't know what
the
deal is. If anyone can
The video card is a Trident 9685 PCI with a voodoo 2 accelerater. How do I
boot into text mode?
-Original Message-
From: Charles A Edwards [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 13, 2000 2:00 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation problem with 7.0
What
I'm installing Linux Mandrake 7.0 on a clean hard drive auto allocated for
linux.
During the install, I choose what packages to install. If I choose to
install the KDE GUI,
when the system reboots I get an error,
KDM: error in loading shared libraries: libz.so.1: cannot open shared object
file:
David Brown wrote:
I'm installing Linux Mandrake 7.0 on a clean hard drive auto allocated for
linux.
During the install, I choose what packages to install. If I choose to
install the KDE GUI,
when the system reboots I get an error,
KDM: error in loading shared libraries: libz.so.1:
frank wrote:
David Brown wrote:
I'm installing Linux Mandrake 7.0 on a clean hard drive auto allocated for
linux.
During the install, I choose what packages to install. If I choose to
install the KDE GUI,
when the system reboots I get an error,
KDM: error in loading shared
I have not been able to complete installation via the graphical
installer that comes with the subject package.
I encountered a system hang up after the graphical installer(DrakX)
completed the package installation step and had gone to the network
configuration step. I did not get a question
Hi, and thanks ahead of time.
I downloaded the 7.0 ISO and burned it to a CD-RW,
and am installing off it.
Everything works absolutely fine up until it get to the
X configuration.. it sends the screen to my monitor fine.. high resolution.. at the
point where it asks "Is this correct? Leaving
Hi, I am a complete Linux newbie and not a whole lot farther along w/
computers as a whole. I have repartitioned my hd using partition magic and
tried to install a copy of mandrake 6.1(helios). Both disk druid and fdisk
off the mandrake cd fail to see the swap and ext2 files that I see in
Umm, sounds like a faulty RAM chip or two.
On Tue, 11 Apr 2000, Huelskamp, VT wrote:
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED]@inter2'
Subject: [newbie] Installation Problem
]@inter2'
Subject: [newbie] Installation Problem
Sensitivity: Personal
While installing 7.0 on a Dell Dimension, 400mhz Celeron, after you select
the packages, the install program shuts down with an error " Exited
Abnormally, Received Signal 11" ??
What is going on? Version 6.0
not installing things
through the installer, you can always install them later.
-Original Message-
From: Huelskamp, VT [mailto:[EMAIL PROTECTED]]
Sent: 11 April 2000 12:08
To: '[EMAIL PROTECTED]@inter2'
Subject: RE: [newbie] Installation Problem
Sensitivity: Personal
I take it that no one
Umm, sounds like a faulty RAM chip or two.
On Tue, 11 Apr 2000, Huelskamp, VT wrote:
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED]@inter2'
Subject: [newbie] Installation Problem
PROTECTED]
To: "'[EMAIL PROTECTED]@inter2'" [EMAIL PROTECTED]
cc:(bcc: Bryan Moorehead/Link/Allied Holdings)
Subject: RE: [newbie] Installation Problem
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMA
MDK 7.0 has known install bugs...try using 7.02
HTH
Jaguar
"Huelskamp, VT" [EMAIL PROTECTED] wrote:
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED]@inter2'
Subject: [newbie] In
PROTECTED]]
Sent: 11 April 2000 12:08
To: '[EMAIL PROTECTED]@inter2'
Subject: RE: [newbie] Installation Problem
Sensitivity: Personal
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED]@inter2'
Subject: [newbie] Installation Problem
Sensitivity: Personal
While installing 7.0 on a Dell Dimension, 400mhz Celeron, after you select
While installing 7.0 on a Dell Dimension, 400mhz Celeron, after you select the
packages, the install program shuts down with an error " Exited Abnormally, Received
Signal 11" ??
What is going on? Version 6.0 installed with little problems.
TIA
VT Huelskamp
Hello Guys,
Good day to all!!!
I have a problem in the installation process particularly in
detecting my lan card "rl100a" i already tried everything setting it up
manualy but still it wont be able to detect the lan card... could
anybody give me a solution on how will manage this for
I'm trying to install Mandrake 7 on a Pentium 100 with a 32 Mb Memory.
When I boot off through diskette it process smoothly through the initial
portion of the installation. After the screen display "second stage
install" things go bad
I receive an error message reading:
I'm trying to install Mandrake 7 on a Pentium 100 with a 32 Mb Memory.
When I boot off through diskette it process smoothly through the initial
portion of the installation. After the screen display "second stage
install" things go bad
I receive an error message reading:
I'm trying to install McMillan's Mandrake 7.0
on a Pentium box. This box will be a dual-boot
machine with Win95 if all goes well. Win95 is
already installed in a small partition, and I
used the PartitionMagic tool to create a big
partition for Linux.
When I boot off either the CD or the
I'm trying to install Mandrake 7 on a Pentium 100 with a 32 Mb Memory.
When I boot off through diskette it process smoothly through the initial
portion of the installation. After the screen display "second stage
install" things go bad
I receive an error message reading:
] installation problem: no enough disk space
Date: Wednesday, July 14, 1999 1:48 PM
hi
I have installed mandrake 6.0 in my AMD6-2 300 PC with 64MB RAM and 4.3G
hard drive. I have tried making 1004MB linux ext2 partition (for path /
) and 70MB swap: 1) by partition magic under win 98; and 2
hi everybody, thank you so much for your advice.
I have solved my problem by putting all empty space in my harddisk into
a dos partitition.
before this I had about 200MB free space at the beginning of my extended
partition. I suspect the installation problem tried to mount the / path
into this
--
From: Chun-wah Liu [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] installation problem: no enough disk space
Date: Wednesday, July 14, 1999 1:48 PM
hi
I have installed mandrake 6.0 in my AMD6-2 300 PC with 64MB RAM and 4.3G
hard drive. I have tried making 1004MB
hi
I have installed mandrake 6.0 in my AMD6-2 300 PC with 64MB RAM and 4.3G
hard drive. I have tried making 1004MB linux ext2 partition (for path /
) and 70MB swap: 1) by partition magic under win 98; and 2) by disk
druid from empty space during installation. however, in either case, I
got the
Brussels
Belgium
- Original Message -
From: Chun-wah Liu [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, July 14, 1999 8:48 PM
Subject: [newbie] installation problem: no enough disk space
hi
I have installed mandrake 6.0 in my AMD6-2 300 PC with 64MB RAM and 4.3G
hard drive. I
Hello,
What this means is that your partition is too small for the installation
you have chosen. When you say it "installs" the remaining packages, it
really isn't adding these packages to what you have already installed.
I'm not sure what it does, but it may overwrite other data, or just
Looks like you selected "install all" from a custom install if so increase
/ to about 2gig
On Thu, 15 Jul 1999, Chun-wah Liu wrote:
hi
I have installed mandrake 6.0 in my AMD6-2 300 PC with 64MB RAM and 4.3G
hard drive. I have tried making 1004MB linux ext2 partition (for path /
) and
KDE/Mandrake Fresh Documentation manual
http://www.linuxmandrake.com/userguide/
Paul A. Bernicchi wrote:
Good afternoon.
I just purchased Mandrake 5.2 and cannot install it...
I am booting from CD-ROM, and it carries me through the installation
process until it asks for the type of
94 matches
Mail list logo
